Search Results

Search found 8162 results on 327 pages for 'module packaging'.

Page 313/327 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >

• cannot connect with huawei e173 after upgrade to 12.10 using network manager

  - by user104195

  Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

  Read the article

• C#/.NET Little Wonders: The Timeout static class

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. When I started the “Little Wonders” series, I really wanted to pay homage to parts of the .NET Framework that are often small but can help in big ways.  The item I have to discuss today really is a very small item in the .NET BCL, but once again I feel it can help make the intention of code much clearer and thus is worthy of note. The Problem - Magic numbers aren’t very readable or maintainable In my first Little Wonders Post (Five Little Wonders That Make Code Better) I mention the TimeSpan factory methods which, I feel, really help the readability of constructed TimeSpan instances. Just to quickly recap that discussion, ask yourself what the TimeSpan specified in each case below is 1: // Five minutes? Five Seconds? 2: var fiveWhat1 = new TimeSpan(0, 0, 5); 3: var fiveWhat2 = new TimeSpan(0, 0, 5, 0); 4: var fiveWhat3 = new TimeSpan(0, 0, 5, 0, 0); You’d think they’d all be the same unit of time, right?  After all, most overloads tend to tack additional arguments on the end.  But this is not the case with TimeSpan, where the constructor forms are:     TimeSpan(int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds);     TimeSpan(int days, int hours, int minutes, int seconds, int milliseconds); Notice how in the 4 and 5 parameter version we suddenly have the parameter days slipping in front of hours?  This can make reading constructors like those above much harder.  Fortunately, there are TimeSpan factory methods to help make your intention crystal clear: 1: // Ah! Much clearer! 2: var fiveSeconds = TimeSpan.FromSeconds(5); These are great because they remove all ambiguity from the reader!  So in short, magic numbers in constructors and methods can be ambiguous, and anything we can do to clean up the intention of the developer will make the code much easier to read and maintain. Timeout – Readable identifiers for infinite timeout values In a similar way to TimeSpan, let’s consider specifying timeouts for some of .NET’s (or our own) many methods that allow you to specify timeout periods. For example, in the TPL Task class, there is a family of Wait() methods that can take TimeSpan or int for timeouts.  Typically, if you want to specify an infinite timeout, you’d just call the version that doesn’t take a timeout parameter at all: 1: myTask.Wait(); // infinite wait But there are versions that take the int or TimeSpan for timeout as well: 1: // Wait for 100 ms 2: myTask.Wait(100); 3:  4: // Wait for 5 seconds 5: myTask.Wait(TimeSpan.FromSeconds(5); Now, if we want to specify an infinite timeout to wait on the Task, we could pass –1 (or a TimeSpan set to –1 ms), which what the .NET BCL methods with timeouts use to represent an infinite timeout: 1: // Also infinite timeouts, but harder to read/maintain 2: myTask.Wait(-1); 3: myTask.Wait(TimeSpan.FromMilliseconds(-1)); However, these are not as readable or maintainable.  If you were writing this code, you might make the mistake of thinking 0 or int.MaxValue was an infinite timeout, and you’d be incorrect.  Also, reading the code above it isn’t as clear that –1 is infinite unless you happen to know that is the specified behavior. To make the code like this easier to read and maintain, there is a static class called Timeout in the System.Threading namespace which contains definition for infinite timeouts specified as both int and TimeSpan forms: Timeout.Infinite An integer constant with a value of –1 Timeout.InfiniteTimeSpan A static readonly TimeSpan which represents –1 ms (only available in .NET 4.5+) This makes our calls to Task.Wait() (or any other calls with timeouts) much more clear: 1: // intention to wait indefinitely is quite clear now 2: myTask.Wait(Timeout.Infinite); 3: myTask.Wait(Timeout.InfiniteTimeSpan); But wait, you may say, why would we care at all?  Why not use the version of Wait() that takes no arguments?  Good question!  When you’re directly calling the method with an infinite timeout that’s what you’d most likely do, but what if you are just passing along a timeout specified by a caller from higher up?  Or perhaps storing a timeout value from a configuration file, and want to default it to infinite? For example, perhaps you are designing a communications module and want to be able to shutdown gracefully, but if you can’t gracefully finish in a specified amount of time you want to force the connection closed.  You could create a Shutdown() method in your class, and take a TimeSpan or an int for the amount of time to wait for a clean shutdown – perhaps waiting for client to acknowledge – before terminating the connection.  So, assume we had a pub/sub system with a class to broadcast messages: 1: // Some class to broadcast messages to connected clients 2: public class Broadcaster 3: { 4: // ... 5:  6: // Shutdown connection to clients, wait for ack back from clients 7: // until all acks received or timeout, whichever happens first 8: public void Shutdown(int timeout) 9: { 10: // Kick off a task here to send shutdown request to clients and wait 11: // for the task to finish below for the specified time... 12:  13: if (!shutdownTask.Wait(timeout)) 14: { 15: // If Wait() returns false, we timed out and task 16: // did not join in time. 17: } 18: } 19: } We could even add an overload to allow us to use TimeSpan instead of int, to give our callers the flexibility to specify timeouts either way: 1: // overload to allow them to specify Timeout in TimeSpan, would 2: // just call the int version passing in the TotalMilliseconds... 3: public void Shutdown(TimeSpan timeout) 4: { 5: Shutdown(timeout.TotalMilliseconds); 6: } Notice in case of this class, we don’t assume the caller wants infinite timeouts, we choose to rely on them to tell us how long to wait.  So now, if they choose an infinite timeout, they could use the –1, which is more cryptic, or use Timeout class to make the intention clear: 1: // shutdown the broadcaster, waiting until all clients ack back 2: // without timing out. 3: myBroadcaster.Shutdown(Timeout.Infinite); We could even add a default argument using the int parameter version so that specifying no arguments to Shutdown() assumes an infinite timeout: 1: // Modified original Shutdown() method to add a default of 2: // Timeout.Infinite, works because Timeout.Infinite is a compile 3: // time constant. 4: public void Shutdown(int timeout = Timeout.Infinite) 5: { 6: // same code as before 7: } Note that you can’t default the ShutDown(TimeSpan) overload with Timeout.InfiniteTimeSpan since it is not a compile-time constant.  The only acceptable default for a TimeSpan parameter would be default(TimeSpan) which is zero milliseconds, which specified no wait, not infinite wait. Summary While Timeout.Infinite and Timeout.InfiniteTimeSpan are not earth-shattering classes in terms of functionality, they do give you very handy and readable constant values that you can use in your programs to help increase readability and maintainability when specifying infinite timeouts for various timeouts in the BCL and your own applications. Technorati Tags: C#,CSharp,.NET,Little Wonders,Timeout,Task

  Read the article

• Scripting Language Sessions at Oracle OpenWorld and MySQL Connect, 2012

  - by cj

  This posts highlights some great scripting language sessions coming up at the Oracle OpenWorld and MySQL Connect conferences. These events are happening in San Francisco from the end of September. You can search for other interesting conference sessions in the Content Catalog. Also check out what is happening at JavaOne in that event's Content Catalog (I haven't included sessions from it in this post.) To find the timeslots and locations of each session, click their respective link and check the "Session Schedule" box on the top right. GEN8431 - General Session: What’s New in Oracle Database Application Development This general session takes a look at what’s been new in the last year in Oracle Database application development tools using the latest generation of database technology. Topics range from Oracle SQL Developer and Oracle Application Express to Java and PHP. (Thomas Kyte - Architect, Oracle) BOF9858 - Meet the Developers of Database Access Services (OCI, ODBC, DRCP, PHP, Python) This session is your opportunity to meet in person the Oracle developers who have built Oracle Database access tools and products such as the Oracle Call Interface (OCI), Oracle C++ Call Interface (OCCI), and Open Database Connectivity (ODBC) drivers; Transparent Application Failover (TAF); Oracle Database Instant Client; Database Resident Connection Pool (DRCP); Oracle Net Services, and so on. The team also works with those who develop the PHP, Ruby, Python, and Perl adapters for Oracle Database. Come discuss with them the features you like, your pains, and new product enhancements in the latest database technology. CON8506 - Syndication and Consolidation: Oracle Database Driver for MySQL Applications This technical session presents a new Oracle Database driver that enables you to run MySQL applications (written in PHP, Perl, C, C++, and so on) against Oracle Database with almost no code change. Use cases for such a driver include application syndication such as interoperability across a relationship database management system, application migration, and database consolidation. In addition, the session covers enhancements in database technology that enable and simplify the migration of third-party databases and applications to and consolidation with Oracle Database. Attend this session to learn more and see a live demo. (Srinath Krishnaswamy - Director, Software Development, Oracle. Kuassi Mensah - Director Product Management, Oracle. Mohammad Lari - Principal Technical Staff, Oracle ) CON9167 - Current State of PHP and MySQL Together, PHP and MySQL power large parts of the Web. The developers of both technologies continue to enhance their software to ensure that developers can be satisfied despite all their changing and growing needs. This session presents an overview of changes in PHP 5.4, which was released earlier this year and shows you various new MySQL-related features available for PHP, from transparent client-side caching to direct support for scaling and high-availability needs. (Johannes Schlüter - SoftwareDeveloper, Oracle) CON8983 - Sharding with PHP and MySQL In deploying MySQL, scale-out techniques can be used to scale out reads, but for scaling out writes, other techniques have to be used. To distribute writes over a cluster, it is necessary to shard the database and store the shards on separate servers. This session provides a brief introduction to traditional MySQL scale-out techniques in preparation for a discussion on the different sharding techniques that can be used with MySQL server and how they can be implemented with PHP. You will learn about static and dynamic sharding schemes, their advantages and drawbacks, techniques for locating and moving shards, and techniques for resharding. (Mats Kindahl - Senior Principal Software Developer, Oracle) CON9268 - Developing Python Applications with MySQL Utilities and MySQL Connector/Python This session discusses MySQL Connector/Python and the MySQL Utilities component of MySQL Workbench and explains how to write MySQL applications in Python. It includes in-depth explanations of the features of MySQL Connector/Python and the MySQL Utilities library, along with example code to illustrate the concepts. Those interested in learning how to expand or build their own utilities and connector features will benefit from the tips and tricks from the experts. This session also provides an opportunity to meet directly with the engineers and provide feedback on your issues and priorities. You can learn what exists today and influence future developments. (Geert Vanderkelen - Software Developer, Oracle) BOF9141 - MySQL Utilities and MySQL Connector/Python: Python Developers, Unite! Come to this lively discussion of the MySQL Utilities component of MySQL Workbench and MySQL Connector/Python. It includes in-depth explanations of the features and dives into the code for those interested in learning how to expand or build their own utilities and connector features. This is an audience-driven session, so put on your best Python shirt and let’s talk about MySQL Utilities and MySQL Connector/Python. (Geert Vanderkelen - Software Developer, Oracle. Charles Bell - Senior Software Developer, Oracle) CON3290 - Integrating Oracle Database with a Social Network Facebook, Flickr, YouTube, Google Maps. There are many social network sites, each with their own APIs for sharing data with them. Most developers do not realize that Oracle Database has base tools for communicating with these sites, enabling all manner of information, including multimedia, to be passed back and forth between the sites. This technical presentation goes through the methods in PL/SQL for connecting to, and then sending and retrieving, all types of data between these sites. (Marcelle Kratochvil - CTO, Piction) CON3291 - Storing and Tuning Unstructured Data and Multimedia in Oracle Database Database administrators need to learn new skills and techniques when the decision is made in their organization to let Oracle Database manage its unstructured data. They will face new scalability challenges. A single row in a table can become larger than a whole database. This presentation covers the techniques a DBA needs for managing the large volume of data in a standard Oracle Database instance. (Marcelle Kratochvil - CTO, Piction) CON3292 - Using PHP, Perl, Visual Basic, Ruby, and Python for Multimedia in Oracle Database These five programming languages are just some of the most popular ones in use at the moment in the marketplace. This presentation details how you can use them to access and retrieve multimedia from Oracle Database. It covers programming techniques and methods for achieving faster development against Oracle Database. (Marcelle Kratochvil - CTO, Piction) UGF5181 - Building Real-World Oracle DBA Tools in Perl Perl is not normally associated with building mission-critical application or DBA tools. Learn why Perl could be a good choice for building your next killer DBA app. This session draws on real-world experience of building DBA tools in Perl, showing the framework and architecture needed to deal with portability, efficiency, and maintainability. Topics include Perl frameworks; Which Comprehensive Perl Archive Network (CPAN) modules are good to use; Perl and CPAN module licensing; Perl and Oracle connectivity; Compiling and deploying your app; An example of what is possible with Perl. (Arjen Visser - CEO & CTO, Dbvisit Software Limited) CON3153 - Perl: A DBA’s and Developer’s Best (Forgotten) Friend This session reintroduces Perl as a language of choice for many solutions for DBAs and developers. Discover what makes Perl so successful and why it is so versatile in our day-to-day lives. Perl can automate all those manual tasks and is truly platform-independent. Perl may not be in the limelight the way other languages are, but it is a remarkable language, it is still very current with ongoing development, and it has amazing online resources. Learn what makes Perl so great (including CPAN), get an introduction to Perl language syntax, find out what you can use Perl for, hear how Oracle uses Perl, discover the best way to learn Perl, and take away a small Perl project challenge. (Arjen Visser - CEO & CTO, Dbvisit Software Limited) CON10332 - Oracle RightNow CX Cloud Service’s Connect PHP API: Intro, What’s New, and Roadmap Connect PHP is a public API that enables developers to build solutions with the Oracle RightNow CX Cloud Service platform. This API is used primarily by developers working within the Oracle RightNow Customer Portal Cloud Service framework who are looking to gain access to data and services hosted by the Oracle RightNow CX Cloud Service platform through a backward-compatible API. Connect for PHP leverages the same data model and services as the Connect Web Services for SOAP API. Come to this session to get an introduction and learn what’s new and what’s coming up. (Mark Rhoads - Senior Principal Applications Engineer, Oracle. Mark Ericson - Sr. Principle Product Manager, Oracle) CON10330 - Oracle RightNow CX Cloud Service APIs and Frameworks Overview Oracle RightNow CX Cloud Service APIs are available in the following areas: desktop UI, Web services, customer portal, PHP, and knowledge. These frameworks provide access to Oracle RightNow CX Cloud Service’s Connect Common Object Model and custom objects. This session provides a broad overview of capabilities in all these areas. (Mark Ericson - Sr. Principle Product Manager, Oracle)

  Read the article

• Combination of Operating Mode and Commit Strategy

  - by Kevin Yang

  If you want to populate a source into multiple targets, you may also want to ensure that every row from the source affects all targets uniformly (or separately). Let’s consider the Example Mapping below. If a row from SOURCE causes different changes in multiple targets (TARGET_1, TARGET_2 and TARGET_3), for example, it can be successfully inserted into TARGET_1 and TARGET_3, but failed to be inserted into TARGET_2, and the current Mapping Property TLO (target load order) is “TARGET_1 -> TARGET_2 -> TARGET_3”. What should Oracle Warehouse Builder do, in order to commit the appropriate data to all affected targets at the same time? If it doesn’t behave as you intended, the data could become inaccurate and possibly unusable.                                               Example Mapping In OWB, we can use Mapping Configuration Commit Strategies and Operating Modes together to achieve this kind of requirements. Below we will explore the combination of these two features and how they affect the results in the target tables Before going to the example, let’s review some of the terms we will be using (Details can be found in white paper Oracle® Warehouse Builder Data Modeling, ETL, and Data Quality Guide11g Release 2): Operating Modes: Set-Based Mode: Warehouse Builder generates a single SQL statement that processes all data and performs all operations. Row-Based Mode: Warehouse Builder generates statements that process data row by row. The select statement is in a SQL cursor. All subsequent statements are PL/SQL. Row-Based (Target Only) Mode: Warehouse Builder generates a cursor select statement and attempts to include as many operations as possible in the cursor. For each target, Warehouse Builder inserts each row into the target separately. Commit Strategies: Automatic: Warehouse Builder loads and then automatically commits data based on the mapping design. If the mapping has multiple targets, Warehouse Builder commits and rolls back each target separately and independently of other targets. Use the automatic commit when the consequences of multiple targets being loaded unequally are not great or are irrelevant. Automatic correlated: It is a specialized type of automatic commit that applies to PL/SQL mappings with multiple targets only. Warehouse Builder considers all targets collectively and commits or rolls back data uniformly across all targets. Use the correlated commit when it is important to ensure that every row in the source affects all affected targets uniformly. Manual: select manual commit control for PL/SQL mappings when you want to interject complex business logic, perform validations, or run other mappings before committing data. Combination of the commit strategy and operating mode To understand the effects of each combination of operating mode and commit strategy, I’ll illustrate using the following example Mapping. Firstly we insert 100 rows into the SOURCE table and make sure that the 99th row and 100th row have the same ID value. And then we create a unique key constraint on ID column for TARGET_2 table. So while running the example mapping, OWB tries to load all 100 rows to each of the targets. But the mapping should fail to load the 100th row to TARGET_2, because it will violate the unique key constraint of table TARGET_2. With different combinations of Commit Strategy and Operating Mode, here are the results ¦ Set-based/ Correlated Commit: Configuration of Example mapping:                                                     Result:                                                      What’s happening: A single error anywhere in the mapping triggers the rollback of all data. OWB encounters the error inserting into Target_2, it reports an error for the table and does not load the row. OWB rolls back all the rows inserted into Target_1 and does not attempt to load rows to Target_3. No rows are added to any of the target tables. ¦ Row-based/ Correlated Commit: Configuration of Example mapping:                                                   Result:                                                  What’s happening: OWB evaluates each row separately and loads it to all three targets. Loading continues in this way until OWB encounters an error loading row 100th to Target_2. OWB reports the error and does not load the row. It rolls back the row 100th previously inserted into Target_1 and does not attempt to load row 100 to Target_3. Then, if there are remaining rows, OWB will continue loading them, resuming with loading rows to Target_1. The mapping completes with 99 rows inserted into each target. ¦ Set-based/ Automatic Commit: Configuration of Example mapping: Result: What’s happening: When OWB encounters the error inserting into Target_2, it does not load any rows and reports an error for the table. It does, however, continue to insert rows into Target_3 and does not roll back the rows previously inserted into Target_1. The mapping completes with one error message for Target_2, no rows inserted into Target_2, and 100 rows inserted into Target_1 and Target_3 separately. ¦ Row-based/Automatic Commit: Configuration of Example mapping: Result: What’s happening: OWB evaluates each row separately for loading into the targets. Loading continues in this way until OWB encounters an error loading row 100 to Target_2 and reports the error. OWB does not roll back row 100th from Target_1, does insert it into Target_3. If there are remaining rows, it will continue to load them. The mapping completes with 99 rows inserted into Target_2 and 100 rows inserted into each of the other targets. Note: Automatic Correlated commit is not applicable for row-based (target only). If you design a mapping with the row-based (target only) and correlated commit combination, OWB runs the mapping but does not perform the correlated commit. In set-based mode, correlated commit may impact the size of your rollback segments. Space for rollback segments may be a concern when you merge data (insert/update or update/insert). Correlated commit operates transparently with PL/SQL bulk processing code. The correlated commit strategy is not available for mappings run in any mode that are configured for Partition Exchange Loading or that include a Queue, Match Merge, or Table Function operator. If you want to practice in your own environment, you can follow the steps: 1. Import the MDL file: commit_operating_mode.mdl 2. Fix the location for oracle module ORCL and deploy all tables under it. 3. Insert sample records into SOURCE table, using below plsql code: begin     for i in 1..99     loop         insert into source values(i, 'col_'||i);     end loop;     insert into source values(99, 'col_99'); end; 4. Configure MAPPING_1 to any combinations of operating mode and commit strategy you want to test. And make sure feature TLO of mapping is open. 5. Deploy Mapping “MAPPING_1”. 6. Run the mapping and check the result.

  Read the article

• CI Deployment Of Azure Web Roles Using TeamCity

  - by srkirkland

  After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

  Read the article

• CodePlex Daily Summary for Monday, July 01, 2013

  CodePlex Daily Summary for Monday, July 01, 2013Popular ReleasesQuickMon: Version 2.10.3: Mainly just a service release - no major changes. Toolbar buttons on main and config window can now be re-arrange (using ALT key) Added property to disable corrective scriptsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Roadkill - .NET Wiki engine: Roadkill v1.7: New features in 1.7: New file manager: Multiple file uploads Drag and drop uploads Delete folders (admins only) Delete files (admins only) (Experimental) Syntaxhighlighting custom variable (using https://github.com/alexgorbatchev/SyntaxHighlighter) - use [[[code lang=c#|your code here]]] (Experimental) MathJax custom variable - use [[[Mathjax]]] and $$your tex$$ on the page. Improved black bar theme Site speed improvements for Javascript/CSS files - now just two files files ea...Download Sharepoint Solution package: Release 4: version updated for SP2013WinRT XAML Toolkit: WinRT XAML Toolkit - 1.5: WinRT XAML Toolkit based on the Windows 8.0 and 8.1 Preview SDKs. Do not download the source code from here if you are looking for latest updates! You can download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Composition library for visual tree rende...Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.95: update parser to allow for CSS3 calc( function to nest. add recognition of -pponly (Preprocess-Only) switch in AjaxMinManifestTask build task. Fix crashing bug in EXE when processing a manifest file using the -xml switch and an error message needs to be displayed (like a missing input file). Create separate Clean and Bundle build tasks for working with manifest files (AjaxMinManifestCleanTask and AjaxMinBundleTask). Removed the IsCleanOperation from AjaxMinManifestTask -- use AjaxMinMan...VG-Ripper & PG-Ripper: VG-Ripper 2.9.44: changes NEW: Added Support for "ImgChili.net" links FIXED: Auto UpdaterDocument.Editor: 2013.25: What's new for Document.Editor 2013.25: Improved Spell Check support Improved User Interface Minor Bug Fix's, improvements and speed upsNew ProjectsAerCloud.net Client - Java, Linux & Windows: This project source code provides a step by step guide for using AerCloud.net Framework as a Service API. For more information please visit http://www.aercloudAmiClient – Asterisk Manager Interface (AMI) client based on the Rx Framework: Asterisk Manager Interface (AMI) client based on the Rx Frameworkbaidupan: cdcddddC#??????: C#??????ImageHelper: imagehelperIP switcher: IP switcher is a simple tool for switching settings, and store presets, on networkadapters.MastersProject: A MS project with a goal of creating a fully Code Contracts verified physics engine and a relatively simple game that uses it.Multiplatform card game: Example multipatform project.PhoneTools: A collection of tools designed to help developers create beautiful Windows Phone 8 apps.rodidexter: lllSharePoint 2013 List Item Encryption: This coding exercise project enables you to encrypt/decrypt list item text field in the browser using industry standard algorithms.tvaSoft: simulation, rotor dynamics, Finite Element Analisys, FEM, ODE, torsional vibration, flexural vibrationX3DML Project: X3DML is an xml-based markup language that defines rules for modeling 3D scenes from a tag-based document. It may be usefull in 3D web design and VR.zhuang-tfs: zhuang tfs

  Read the article

• Learning content for MCSDs: Web Applications and Windows Store Apps using HTML5

  Recently, I started again to learn for various Microsoft certifications. First candidate on my way to MSCD: Web Applications is the Exam 70-480: Programming in HTML5 with JavaScript and CSS3. Motivation to go for a Microsoft exam I guess, this is quite personal but let me briefly describe my intentions to go that exam. First, I'm doing web development since the 1990's. Working with HTML, CSS and Javascript is happening almost daily in my workspace. And honestly, I do not only do 'pure' web development but already integrated several HTML/CSS/Javascript frontend UIs into an existing desktop application (written in Visual FoxPro) inclusive two-way communication and data exchange. Hm, might be an interesting topic for another blog article here... Second, this exam has a very interesting aspect which is listed at the bottom of the exam's details: Credit Toward Certification When you pass Exam 70-480: Programming in HTML5 with JavaScript and CSS3, you complete the requirements for the following certification(s): Programming in HTML5 with JavaScript and CSS3 Specialist Exam 70-480: Programming in HTML5 with JavaScript and CSS3: counts as credit toward the following certification(s): MCSD: Web Applications MCSD: Windows Store Apps using HTML5 So, passing one single exam will earn you specialist certification straight-forward, and opens the path to higher levels of certifications. Preparations and learning path Well, due to a newsletter from Microsoft Learning (MSL) I caught interest in picking up the circumstances and learning materials for this particular exam. As of writing this article there is a promotional / voucher code available which enables you to register for this exam for free! Simply register yourself with or log into your existing account at Prometric, choose the exam for a testing facility near to you and enter the voucher code HTMLJMP (available through 31.03.2013 or while supplies last). Hurry up, there are restrictions... As stated above, I'm already very familiar with web development and the programming flavours involved into this. But of course, it is always good to freshen up your knowledge and reflect on yourself. Microsoft is putting a lot of effort to attract any kind of developers into the 'App Development'. Whether it is for the Windows 8 Store or the Windows Phone 8 Store, doesn't really matter. They simply need more apps. This demand for skilled developers also comes with a nice side-effect: Lots and lots of material to study. During the first couple of hours, I could easily gather high quality preparation material - again for free! Following is just a small list of starting points. If you have more resources, please drop me a message in the comment section, and I'll be glad to update this article accordingly. Developing HTML5 Apps Jump Start This is an accelerated jump start video course on development of HTML5 Apps for Windows 8. There are six modules that are split into two video sessions per module. Very informative and intense course material. This is packed stuff taken from an official preparation course for exam 70-480. Developing Windows Store Apps with HTML5 Jump Start Again, an accelerated preparation video course on Windows 8 Apps. There are six modules with two video sessions each which will catapult you to your exam. This is also related to preps for exam 70-481. Programming Windows 8 Apps with HTML, CSS, and JavaScript Kraig Brockschmidt delves into the ups and downs of Windows 8 App development over 800+ pages. Great eBook to read, study, and to practice the samples - best of all, it's for free. codeSHOW() This is a Windows 8 HTML/JS project with the express goal of demonstrating simple development concepts for the Windows 8 platform. Code, code and more code... absolutely great stuff to study and practice. Microsoft Virtual Academy I already wrote about the MVA in a previous article. Well, if you haven't registered yourself yet, now is the time. The list is not complete for sure, but this might keep you busy for at least one or even two weeks to go through the material. Please don't hesitate to add more resources in the comment section. Right now, I'm already through all videos once, and digging my way through chapter 4 of Kraig's book. Additional material - Pluralsight Apart from those free online resources, I also following some courses from the excellent library of Pluralsight. They already have their own section for Windows 8 development, but of course, you get companion material about HTML5, CSS and Javascript in other sections, too. Introduction to Building Windows 8 Applications Building Windows 8 Applications with JavaScript and HTML Selling Windows 8 Apps HTML5 Fundamentals Using HTML5 and CSS3 HTML5 Advanced Topics CSS3 etc... Interesting to see that Michael Palermo provides his course material on multiple platforms. Fantastic! You might also pay a visit to his personal blog. Hm, it just came to my mind that Aaron Skonnard of Pluralsight publishes so-called '24 hours Learning Paths' based on courses available in the course library. Would be interested to see a combination for Windows 8 App development using HTML5, CSS3 and Javascript in the future. Recommended workspace environment Well, you might have guessed it but this requires Windows 8, Visual Studio 2012 Express or another flavour, and a valid Developers License. Due to an MSDN subscription I working on VS 2012 Premium with some additional tools by Telerik. Honestly, the fastest way to get you up and running for Windows 8 App development is the source code archive of codeSHOW(). It does not only give you all source code in general but contains a couple of SDKs like Bing Maps, Microsoft Advertising, Live ID, and Telerik Windows 8 controls... for free! Hint: Get the Windows Phone 8 SDK as well. Don't worry, while you are studying the material for Windows 8 you will be able to leverage from this knowledge to development for the phone platform, too. It takes roughly one to two hours to get your workspace and learning environment, at least this was my time frame due to slow internet connection and an aged spare machine. ;-) Oh, before I forget to mention it, as soon as you're done, go quickly to the Windows Store and search for ClassBrowserPlus. You might not need it ad hoc for your development using HTML5, CSS and Javascript but I think that it is a great developer's utility that enables you to view the properties, methods and events (along with help text) for all Windows 8 classes. It's always good to look behind the scenes and to explore how it is made. Idea: Start/join a learning group The way you learn new things or intensify your knowledge in a certain technology is completely up to your personal preference. Back in my days at the university, we used to meet once or twice a week in a small quiet room to exchange our progress, questions and problems we ran into. In general, I recommend to any software craftsman to lift your butt and get out to exchange with other developers. Personally, I like this approach, as it gives you new points of view and an insight into others' own experience with certain techniques and how they managed to solve tricky issues. Just keep it relaxed and not too formal after all, and you might a have a good time away from your dull office desk. Give your machine a break, too.

  Read the article

• How you can extend Tasklists in Fusion Applications

  - by Elie Wazen

  In this post we describe the process of modifying and extending a Tasklist available in the Regional Area of a Fusion Applications UI Shell. This is particularly useful to Customers who would like to expose Setup Tasks (generally available in the Fusion Setup Manager application) in the various functional pillars workareas. Oracle Composer, the tool used to implement such extensions allows changes to be made at runtime. The example provided in this document is for an Oracle Fusion Financials page. Let us examine the case of a customer role who requires access to both, a workarea and its associated functional tasks, and to an FSM (setup) task.  Both of these tasks represent ADF Taskflows but each is accessible from a different page.  We will show how an FSM task is added to a Functional tasklist and made accessible to a user from within a single workarea, eliminating the need to navigate between the FSM application and the Functional workarea where transactions are conducted. In general, tasks in Fusion Applications are grouped in two ways: Setup tasks are grouped in tasklists available to implementers in the Functional Setup Manager (FSM). These Tasks are accessed by implementation users and in general do not represent daily operational tasks that fit into a functional business process and were consequently included in the FSM application. For these tasks, the primary organizing principle is precedence between tasks. If task "Manage Suppliers" has prerequisites, those tasks must precede it in a tasklist. Task Lists are organized to efficiently implement an offering. Tasks frequently performed as part of business process flows are made available as links in the tasklist of their corresponding menu workarea. The primary organizing principle in the menu and task pane entries is to group tasks that are generally accessed together. Customizing a tasklist thus becomes required for business scenarios where a task packaged under FSM as a setup task, is for a particular customer a regular maintenance task that is accessed for record updates or creation as part of normal operational activities and where the frequency of this access merits the inclusion of that task in the related operational tasklist A user with the role of maintaining Journals in General Ledger is also responsible for maintaining Chart of Accounts Mappings.  In the Fusion Financials Product Family, Manage Journals is a task available from within the Journals Menu whereas Chart of Accounts Mapping is available via FSM under the Define Chart of Accounts tasklist Figure 1. The Manage Chart of Accounts Mapping Task in FSM Figure 2. The Manage Journals Task in the Task Pane of the Journals Workarea Our goal is to simplify cross task navigation and allow the user to access both tasks from a single tasklist on a single page without having to navigate to FSM for the Mapping task and to the Journals workarea for the Manage task. To accomplish that, we use Oracle Composer to customize  the Journals tasklist by adding to it the Mapping task. Identify the Taskflow name and path of the FSM Task The first step in our process is to identify the underlying taskflow for the Manage Chart of Accounts Mappings task. We select to Setup and Maintenance from the Navigator to launch the FSM Application, and we query the task from Manage Tasklists and Tasks Figure 3. Task Details including Taskflow path The Manage Chart of Accounts Mapping Task Taskflow is: /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/coaMappings/ui/flow /CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow We copy that value and use it later as a parameter to our new task in the customized Journals Tasklist. Customize the Journals Page A user with Administration privileges can start the run time customization directly from the Administration Menu of the Global Area.  This customization is done at the Site level and once implemented becomes available to all users with access to the Journals Workarea. Figure 4.  Customization Menu The Oracle Composer Window is displayed in the same browser and the Hierarchy of the page component is displayed and available for modification. Figure 5.  Oracle Composer In the composer Window select the PanelFormLayout node and click on the Edit Button.  Note that the selected component is simultaneously highlighted in the lower pane in the browser. In the Properties popup window, select the Tasks List and Task Properties Tab, where the user finds the hierarchy of the Tasklist and is able to Edit nodes or create new ones. src="https://blogs.oracle.com/FunctionalArchitecture/resource/TL5.jpg" Figure 6.  The Tasklist in edit mode Add a Child Task to the Tasklist In the Edit Window the user will now create a child node at the desired level in the hierarchy by selecting the immediate parent node and clicking on the insert node button.  This process requires four values to be set as described in Table 1 below. Parameter Value How to Determine the Value Focus View Id /JournalEntryPage This is the Focus View ID of the UI Shell where the Tasklist we want to customize is.  A simple way to determine this value is to copy it from any of the Standard tasks on the Tasklist Label COA Mapping This is the Display name of the Task as it will appear in the Tasklist Task Type dynamicMain If the value is dynamicMain, the page contains a new link in the Regional Area. When you click the link, a new tab with the loaded task opens Taskflowid /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/ coaMappings/ui/flow/ CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow This is the Taskflow path we retrieved from the Task Definition in FSM earlier in the process Table 1.  Parameters and Values for the Task to be added to the customized Tasklist Figure 7.   The parameters window of the newly added Task   Access the FSM Task from the Journals Workarea Once the FSM task is added and its parameters defined, the user saves the record, closes the Composer making the new task immediately available to users with access to the Journals workarea (Refer to Figure 8 below). Figure 8.   The COA Mapping Task is now visible and can be invoked from the Journals Workarea   Additional Considerations If a Task Flow is part of a product that is deployed on the same app server as the Tasklist workarea then that task flow can be added to a customized tasklist in that workarea. Otherwise that task flow can be invoked from its parent product’s workarea tasklist by selecting that workarea from the Navigator menu. For Example The following Taskflows  belong respectively to the Subledger Accounting, and to the General Ledger Products.  /WEB-INF/oracle/apps/financials/subledgerAccounting/accountingMethodSetup/mappingSets/ui/flow/MappingSetFlow.xml#MappingSetFlow /WEB-INF/oracle/apps/financials/generalLedger/sharedSetup/coaMappings/ui/flow/CoaMappingsMainAreaFlow.xml#CoaMappingsMainAreaFlow Since both the Subledger Accounting and General Ledger products are part of the LedgerApp J2EE Applicaton and are both deployed on the General Ledger Cluster Server (Figure 8 below), the user can add both of the above taskflows to the  tasklist in the  /JournalEntryPage FocusVIewID Workarea. Note:  both FSM Taskflows and Functional Taskflows can be added to the Tasklists as described in this document Figure 8.   The Topology of the Fusion Financials Product Family. Note that SubLedger Accounting and General Ledger are both deployed on the Ledger App Conclusion In this document we have shown how an administrative user can edit the Tasklist in the Regional Area of a Fusion Apps page using Oracle Composer. This is useful for cases where tasks packaged in different workareas are frequently accessed by the same user. By making these tasks available from the same page, we minimize the number of steps in the navigation the user has to do to perform their transactions and queries in Fusion Apps.  The example explained above showed that tasks classified as Setup tasks, meaning made accessible to implementation users from the FSM module can be added to the workarea of their respective Fusion application. This eliminates the need to navigate to FSM to access tasks that are both setup and regular maintenance tasks. References Oracle Fusion Applications Extensibility Guide 11g Release 1 (11.1.1.5) Part Number E16691-02 (Section 3.2) Oracle Fusion Applications Developer's Guide 11g Release 1 (11.1.4) Part Number E15524-05

  Read the article

• Optimizing AES modes on Solaris for Intel Westmere

  - by danx

  Optimizing AES modes on Solaris for Intel Westmere Review AES is a strong method of symmetric (secret-key) encryption. It is a U.S. FIPS-approved cryptographic algorithm (FIPS 197) that operates on 16-byte blocks. AES has been available since 2001 and is widely used. However, AES by itself has a weakness. AES encryption isn't usually used by itself because identical blocks of plaintext are always encrypted into identical blocks of ciphertext. This encryption can be easily attacked with "dictionaries" of common blocks of text and allows one to more-easily discern the content of the unknown cryptotext. This mode of encryption is called "Electronic Code Book" (ECB), because one in theory can keep a "code book" of all known cryptotext and plaintext results to cipher and decipher AES. In practice, a complete "code book" is not practical, even in electronic form, but large dictionaries of common plaintext blocks is still possible. Here's a diagram of encrypting input data using AES ECB mode: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ AESKey-->(AES Encryption) AESKey-->(AES Encryption) | | | | \/ \/ CipherTextOutput CipherTextOutput Block 1 Block 2 What's the solution to the same cleartext input producing the same ciphertext output? The solution is to further process the encrypted or decrypted text in such a way that the same text produces different output. This usually involves an Initialization Vector (IV) and XORing the decrypted or encrypted text. As an example, I'll illustrate CBC mode encryption: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ IV >----->(XOR) +------------->(XOR) +---> . . . . | | | | | | | | \/ | \/ | AESKey-->(AES Encryption) | AESKey-->(AES Encryption) | | | | | | | | | \/ | \/ | CipherTextOutput ------+ CipherTextOutput -------+ Block 1 Block 2 The steps for CBC encryption are: Start with a 16-byte Initialization Vector (IV), choosen randomly. XOR the IV with the first block of input plaintext Encrypt the result with AES using a user-provided key. The result is the first 16-bytes of output cryptotext. Use the cryptotext (instead of the IV) of the previous block to XOR with the next input block of plaintext Another mode besides CBC is Counter Mode (CTR). As with CBC mode, it also starts with a 16-byte IV. However, for subsequent blocks, the IV is just incremented by one. Also, the IV ix XORed with the AES encryption result (not the plain text input). Here's an illustration: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ AESKey-->(AES Encryption) AESKey-->(AES Encryption) | | | | \/ \/ IV >----->(XOR) IV + 1 >---->(XOR) IV + 2 ---> . . . . | | | | \/ \/ CipherTextOutput CipherTextOutput Block 1 Block 2 Optimization Which of these modes can be parallelized? ECB encryption/decryption can be parallelized because it does more than plain AES encryption and decryption, as mentioned above. CBC encryption can't be parallelized because it depends on the output of the previous block. However, CBC decryption can be parallelized because all the encrypted blocks are known at the beginning. CTR encryption and decryption can be parallelized because the input to each block is known--it's just the IV incremented by one for each subsequent block. So, in summary, for ECB, CBC, and CTR modes, encryption and decryption can be parallelized with the exception of CBC encryption. How do we parallelize encryption? By interleaving. Usually when reading and writing data there are pipeline "stalls" (idle processor cycles) that result from waiting for memory to be loaded or stored to or from CPU registers. Since the software is written to encrypt/decrypt the next data block where pipeline stalls usually occurs, we can avoid stalls and crypt with fewer cycles. This software processes 4 blocks at a time, which ensures virtually no waiting ("stalling") for reading or writing data in memory. Other Optimizations Besides interleaving, other optimizations performed are Loading the entire key schedule into the 128-bit %xmm registers. This is done once for per 4-block of data (since 4 blocks of data is processed, when present). The following is loaded: the entire "key schedule" (user input key preprocessed for encryption and decryption). This takes 11, 13, or 15 registers, for AES-128, AES-192, and AES-256, respectively The input data is loaded into another %xmm register The same register contains the output result after encrypting/decrypting Using SSSE 4 instructions (AESNI). Besides the aesenc, aesenclast, aesdec, aesdeclast, aeskeygenassist, and aesimc AESNI instructions, Intel has several other instructions that operate on the 128-bit %xmm registers. Some common instructions for encryption are: pxor exclusive or (very useful), movdqu load/store a %xmm register from/to memory, pshufb shuffle bytes for byte swapping, pclmulqdq carry-less multiply for GCM mode Combining AES encryption/decryption with CBC or CTR modes processing. Instead of loading input data twice (once for AES encryption/decryption, and again for modes (CTR or CBC, for example) processing, the input data is loaded once as both AES and modes operations occur at in the same function Performance Everyone likes pretty color charts, so here they are. I ran these on Solaris 11 running on a Piketon Platform system with a 4-core Intel Clarkdale processor @3.20GHz. Clarkdale which is part of the Westmere processor architecture family. The "before" case is Solaris 11, unmodified. Keep in mind that the "before" case already has been optimized with hand-coded Intel AESNI assembly. The "after" case has combined AES-NI and mode instructions, interleaved 4 blocks at-a-time. « For the first table, lower is better (milliseconds). The first table shows the performance improvement using the Solaris encrypt(1) and decrypt(1) CLI commands. I encrypted and decrypted a 1/2 GByte file on /tmp (swap tmpfs). Encryption improved by about 40% and decryption improved by about 80%. AES-128 is slighty faster than AES-256, as expected. The second table shows more detail timings for CBC, CTR, and ECB modes for the 3 AES key sizes and different data lengths. » The results shown are the percentage improvement as shown by an internal PKCS#11 microbenchmark. And keep in mind the previous baseline code already had optimized AESNI assembly! The keysize (AES-128, 192, or 256) makes little difference in relative percentage improvement (although, of course, AES-128 is faster than AES-256). Larger data sizes show better improvement than 128-byte data. Availability This software is in Solaris 11 FCS. It is available in the 64-bit libcrypto library and the "aes" Solaris kernel module. You must be running hardware that supports AESNI (for example, Intel Westmere and Sandy Bridge, microprocessor architectures). The easiest way to determine if AES-NI is available is with the isainfo(1) command. For example, $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu 32-bit i386 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov sep cx8 tsc fpu No special configuration or setup is needed to take advantage of this software. Solaris libraries and kernel automatically determine if it's running on AESNI-capable machines and execute the correctly-tuned software for the current microprocessor. Summary Maximum throughput of AES cipher modes can be achieved by combining AES encryption with modes processing, interleaving encryption of 4 blocks at a time, and using Intel's wide 128-bit %xmm registers and instructions. References "Block cipher modes of operation", Wikipedia Good overview of AES modes (ECB, CBC, CTR, etc.) "Advanced Encryption Standard", Wikipedia "Current Modes" describes NIST-approved block cipher modes (ECB,CBC, CFB, OFB, CCM, GCM)

  Read the article

• Unable to enable wireless on a Vostro 2520

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes Output of lspci > 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev > 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge > Graphics Controller (rev 09) 00:16.0 Communication controller: Intel > Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB > controller: Intel Corporation Panther Point USB Enhanced Host > Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther > Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: > Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) > 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root > Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point > PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel > Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) > 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller > (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 > port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel > Corporation Panther Point SMBus Controller (rev 04) 07:00.0 Network > controller: Broadcom Corporation Device 4365 (rev 01) 09:00.0 Ethernet > controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express > Gigabit Ethernet controller (rev 07) Output of lspci -v 0:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 42 Memory at f7d0a000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7d08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7d00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f7c00000-f7cfffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7d07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Dell Device 0558 Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 0558 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 40 I/O ports at f0b0 [size=8] I/O ports at f0a0 [size=4] I/O ports at f090 [size=8] I/O ports at f080 [size=4] I/O ports at f060 [size=32] Memory at f7d06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Dell Device 0558 Flags: medium devsel, IRQ 11 Memory at f7d05000 (64-bit, non-prefetchable) [size=256] I/O ports at f040 [size=32] Kernel modules: i2c-i801 07:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) Subsystem: Dell Device 0016 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at f7c00000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Subsystem: Dell Device 0558 Flags: bus master, fast devsel, latency 0, IRQ 41 I/O ports at e000 [size=256] Memory at f0004000 (64-bit, prefetchable) [size=4K] Memory at f0000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169

  Read the article

• Curing the Database-Application mismatch

  - by Phil Factor

  If an application requires access to a database, then you have to be able to deploy it so as to be version-compatible with the database, in phase. If you can deploy both together, then the application and database must normally be deployed at the same version in which they, together, passed integration and functional testing.  When a single database supports more than one application, then the problem gets more interesting. I’ll need to be more precise here. It is actually the application-interface definition of the database that needs to be in a compatible ‘version’.  Most databases that get into production have no separate application-interface; in other words they are ‘close-coupled’.  For this vast majority, the whole database is the application-interface, and applications are free to wander through the bowels of the database scot-free.  If you’ve spurned the perceived wisdom of application architects to have a defined application-interface within the database that is based on views and stored procedures, any version-mismatch will be as sensitive as a kitten.  A team that creates an application that makes direct access to base tables in a database will have to put a lot of energy into keeping Database and Application in sync, to say nothing of having to tackle issues such as security and audit. It is not the obvious route to development nirvana. I’ve been in countless tense meetings with application developers who initially bridle instinctively at the apparent restrictions of being ‘banned’ from the base tables or routines of a database.  There is no good technical reason for needing that sort of access that I’ve ever come across.  Everything that the application wants can be delivered via a set of views and procedures, and with far less pain for all concerned: This is the application-interface.  If more than zero developers are creating a database-driven application, then the project will benefit from the loose-coupling that an application interface brings. What is important here is that the database development role is separated from the application development role, even if it is the same developer performing both roles. The idea of an application-interface with a database is as old as I can remember. The big corporate or government databases generally supported several applications, and there was little option. When a new application wanted access to an existing corporate database, the developers, and myself as technical architect, would have to meet with hatchet-faced DBAs and production staff to work out an interface. Sure, they would talk up the effort involved for budgetary reasons, but it was routine work, because it decoupled the database from its supporting applications. We’d be given our own stored procedures. One of them, I still remember, had ninety-two parameters. All database access was encapsulated in one application-module. If you have a stable defined application-interface with the database (Yes, one for each application usually) you need to keep the external definitions of the components of this interface in version control, linked with the application source,  and carefully track and negotiate any changes between database developers and application developers.  Essentially, the application development team owns the interface definition, and the onus is on the Database developers to implement it and maintain it, in conformance.  Internally, the database can then make all sorts of changes and refactoring, as long as source control is maintained.  If the application interface passes all the comprehensive integration and functional tests for the particular version they were designed for, nothing is broken. Your performance-testing can ‘hang’ on the same interface, since databases are judged on the performance of the application, not an ‘internal’ database process. The database developers have responsibility for maintaining the application-interface, but not its definition,  as they refactor the database. This is easily tested on a daily basis since the tests are normally automated. In this setting, the deployment can proceed if the more stable application-interface, rather than the continuously-changing database, passes all tests for the version of the application. Normally, if all goes well, a database with a well-designed application interface can evolve gracefully without changing the external appearance of the interface, and this is confirmed by integration tests that check the interface, and which hopefully don’t need to be altered at all often.  If the application is rapidly changing its ‘domain model’  in the light of an increased understanding of the application domain, then it can change the interface definitions and the database developers need only implement the interface rather than refactor the underlying database.  The test team will also have to redo the functional and integration tests which are, of course ‘written to’ the definition.  The Database developers will find it easier if these tests are done before their re-wiring  job to implement the new interface. If, at the other extreme, an application receives no further development work but survives unchanged, the database can continue to change and develop to keep pace with the requirements of the other applications it supports, and needs only to take care that the application interface is never broken. Testing is easy since your automated scripts to test the interface do not need to change. The database developers will, of course, maintain their own source control for the database, and will be likely to maintain versions for all major releases. However, this will not need to be shared with the applications that the database servers. On the other hand, the definition of the application interfaces should be within the application source. Changes in it have to be subject to change-control procedures, as they will require a chain of tests. Once you allow, instead of an application-interface, an intimate relationship between application and database, we are in the realms of impedance mismatch, over and above the obvious security problems.  Part of this impedance problem is a difference in development practices. Whereas the application has to be regularly built and integrated, this isn’t necessarily the case with the database.  An RDBMS is inherently multi-user and self-integrating. If the developers work together on the database, then a subsequent integration of the database on a staging server doesn’t often bring nasty surprises. A separate database-integration process is only needed if the database is deliberately built in a way that mimics the application development process, but which hampers the normal database-development techniques.  This process is like demanding a official walking with a red flag in front of a motor car.  In order to closely coordinate databases with applications, entire databases have to be ‘versioned’, so that an application version can be matched with a database version to produce a working build without errors.  There is no natural process to ‘version’ databases.  Each development project will have to define a system for maintaining the version level. A curious paradox occurs in development when there is no formal application-interface. When the strains and cracks happen, the extra meetings, bureaucracy, and activity required to maintain accurate deployments looks to IT management like work. They see activity, and it looks good. Work means progress.  Management then smile on the design choices made. In IT, good design work doesn’t necessarily look good, and vice versa.

  Read the article

• CodePlex Daily Summary for Friday, August 22, 2014

  CodePlex Daily Summary for Friday, August 22, 2014Popular ReleasesQuickMon: Version 3.22: This release add two important changes. 1. Config variables at the monitor pack level (global to entire monitor pack for all Collectors) 2. The QuickMon (Windows) service now automatically reloads monitor packs that have been changed since it was started. This means you don't have to restart the service for changes to take effect.SSIS ReportGeneratorTask: ReportGenerator Task 1.8: New version of the SSIS Report Generator Task that supports SQL Server 2008, 2012 and 2014. In addition to minor bug fixes Multi-Value Parameters and Execution Information were integrated. The complete variable and parameter assignment is now a string and can be set dynamically.Corefig for Windows Server 2012 Core and Hyper-V Server 2012: Corefig 1.1.2 ISO: FixesUpdated Hyper-V scripts to use version 2 of the WMI tree. Updated the Hyper-V check for saved VM to look for the proper identifier. Fixed text issues with the licensing tab (thanks to briangw for rooting this problem out). EnhancementsNew (and improved) version number in Corefig.psd1.Outlook 2013 Backup Add-In: Outlook Backup Add-In 1.3: Changelog for new version: Added button in config-window to reset the last backup-time (this will trigger the backup after closing outlook) Minimum interval set to 0 (backup at each closing of outlook) Catch exception when data store entry is corrupt Added two parameters (prefix and suffix) to automatically rename the backup file Updated VSTO-Runtime to 10.0.50325 Upgraded project to Visual Studio 2013 Added optional command to run after backup (e.g. pack backup files, ...) Add...babelua: 1.6.7.0: V1.6.7.0 - 2014.8.21New feature: add a file search window ( ctrl+1 or ALT+L ), like The file search in VC Assistant; Stability improvement: performance improvement when BabeLua load/unload; performance improvement when debugger load lua files;File Explorer for WPF: FileExplorer3_20August2014: Please see Aug14 Update.Open NFe: RDI Open NFe 3.0 (alpha): Atualização para o layout 3.10 da NFe.ODBC Connect: v1.0: ODBC Connect executables for both 32bit and 64bit ODBC data sourcesMSSQL Deployment Tool: Microsoft SQL Deploy Tool v1.3.1: MicrosoftSqlDeployTool: v1.3.1.38348 What's changed? Update namespace and assembly name. Bug fixing.SharePoint 2013 Search Query Tool: SharePoint 2013 Search Query Tool v2.1: Layout improvements Bug fixes Stores auth method and user name Moved experimental settings to Advanced boxCtrlAltStudio Viewer: CtrlAltStudio Viewer 1.2.2.41183 Alpha: This alpha of the CtrlAltStudio Viewer provides some preliminary Oculus Rift DK2 support. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-2-2-41183-alpha Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of Second Life.HDD Guardian: HDD Guardian 0.6.1: New: package now include smartctl 6.3; Removed: standard notification e-mail. Now you have to set your mail server to send e-mail alerts; Bugfix: USB detection error; custom e-mail server settings issue; bottom panel displays a wrong ATA error count.VG-Ripper & PG-Ripper: VG-Ripper 2.9.62: changes NEW: Added Support for 'MadImage.org' links NEW: Added Support for 'ImgSpot.org' links NEW: Added Support for 'ImgClick.net' links NEW: Added Support for 'Imaaage.com' links NEW: Added Support for 'Image-Bugs.com' links NEW: Added Support for 'Pictomania.org' links NEW: Added Support for 'ImgDap.com' links NEW: Added Support for 'FileSpit.com' links FIXED: 'ImgSee.me' linksMagick.NET: Magick.NET 7.0.0.0001: Magick.NET linked with ImageMagick 7-Beta.CMake Tools for Visual Studio: CMake Tools for Visual Studio 1.2: This release adds the following new features and bug fixes from CMake Tools for Visual Studio 1.1: Added support for CMake 3.0. Added support for word completion. Added IntelliSense support for the CMAKEHOSTSYSTEM_INFORMATION command. Fixed syntax highlighting for tokens beginning with escape sequences. Fixed issue uninstalling CMake Tools for Visual Studio after Visual Studio has been uninstalled.GW2 Personal Assistant Overlay: GW2 Personal Assistant Overlay 1.1: Overview1.1 is the second 'stable' release of the GW2 Personal Assistant Overlay. This version includes just a couple of very minor features and some minor bug fixes. For details regarding installation, setup, and general use, see Documentation. Note: If you were using a previous version, you will probably want to copy over the following user settings files: GW2PAO.DungeonSettings.xml GW2PAO.EventSettings.xml GW2PAO.WvWSettings.xml GW2PAO.ZoneCompletionSettings.xml New FeaturesAdded new "No...Fluentx: Fluentx v1.5.3: Added few more extension methods.fastJSON: v2.1.2: 2.1.2 - bug fix circular referencesJPush.NET: JPush Server SDK 1.2.1 (For JPush V3): Assembly: 1.2.1.24728 JPush REST API Version: v3 JPush Documentation Reference .NET framework: v4.0 or above. Sample: class: JPushClientV3 2014 Augest 15th.SEToolbox: SEToolbox 01.043.008 Release 1: Changed ship/station names to use new DisplayName instead of Beacon/Antenna. Fixed issue with updated SE binaries 01.043.018 using new Voxel Material definitions.New Projects1thManage: GDT for erevery oneCreateProjectOnCodePlex: This is the first project for CoderCamps.HEAD FIRST C# LAB 1 : A DAY AT THE RACES: This has been provided for educational purposes and general discussion to improve coding practices associated with the resources detailed within Head First C#.Introduce Audit logging to your EF application using Repository & Unit of Work: Introduce Auditing in your application that uses Entity Framework by utilizing the Repository and Unit of Work design patterns.License Registration (C++): Allow to create demo version, activate or not a module.MS Word SharepointWiki Plugin: Scope of the Plugin is to enable a Post to a Sharepoint Wiki from within MS Word with Formatted Text and Images.Send My Zip: This app will help you to send the files were zipped then send the email about password information. This project is currently in setup mode and only availablewinhttp: this is a project for http/https download.Wix Builder: WixBuilder focusses on easily generating a WiX script from a project ouput, compile and link it into msi installer using the WiX Toolset.XiamiSig: ????????。

  Read the article

• Dual Monitor (Monitor and TV)

  - by umpirsky

  I connected TV to my computer, and trying to set dual display. Whatever resolution I choose for my second display (TV) I get message like this: The selected configuration for displays could not be applied required virtual size does not fit available size: requested=(2704, 1050), minimum=(320, 200), maximum=(1680, 1680) How can I fix this? Also, while I was experimenting system went to deadlock, I restarted and after boot monitor just turns off once system is up. I boot in recovery mode and after several retries fixed it somehow, I don't know how, probably by changing display config from display manager. now I found xorg.conf.new file in my home dir: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "extmod" Load "dbe" Load "glx" Load "dri" Load "dri2" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Can I delete it? Second display (TV) only works when I check Mirror displays option.

  Read the article

• Creating a Training Lab on Windows Azure

  - by Michael Stephenson

  Originally posted on: http://geekswithblogs.net/michaelstephenson/archive/2013/06/17/153149.aspxThis week we are preparing for a training course that Alan Smith will be running for the support teams at one of my customers around Windows Azure. In order to facilitate the training lab we have a few prerequisites we need to handle. One of the biggest ones is that although the support team all have MSDN accounts the local desktops they work on are not ideal for running most of the labs as we want to give them some additional developer background training around Azure. Some recent Azure announcements really help us in this area: MSDN software can now be used on Azure VM You don't pay for Azure VM's when they are no longer used  Since the support team only have limited experience of Windows Azure and the organisation also have an Enterprise Agreement we decided it would be best value for money to spin up a training lab in a subscription on the EA and then we can turn the machines off when we are done. At the same time we would be able to spin them back up when the users need to do some additional lab work once the training course is completed. In order to achieve this I wanted to create a powershell script which would setup my training lab. The aim was to create 18 VM's which would be based on a prebuilt template with Visual Studio and the Azure development tools. The script I used is described below The Start & Variables The below text will setup the powershell environment and some variables which I will use elsewhere in the script. It will also import the Azure Powershell cmdlets. You can see below that I will need to download my publisher settings file and know some details from my Azure account. At this point I will assume you have a basic understanding of Azure & Powershell so already know how to do this. Set-ExecutionPolicy Unrestrictedcls $startTime = get-dateImport-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\Azure.psd1"# Azure Publisher Settings $azurePublisherSettings = '<Your settings file>.publishsettings'  # Subscription Details $subscriptionName = "<Your subscription name>" $defaultStorageAccount = "<Your default storage account>"  # Affinity Group Details $affinityGroup = '<Your affinity group>' $dataCenter = 'West Europe' # From Get-AzureLocation  # VM Details $baseVMName = 'TRN' $adminUserName = '<Your admin username>' $password = '<Your admin password>' $size = 'Medium' $vmTemplate = '<The name of your VM template image>' $rdpFilePath = '<File path to save RDP files to>' $machineSettingsPath = '<File path to save machine info to>'    Functions In the next section of the script I have some functions which are used to perform certain actions. The first is called CreateVM. This will do the following actions: If the VM already exists it will be deleted Create the cloud service Create the VM from the template I have created Add an endpoint so we can RDP to them all over the same port Download the RDP file so there is a short cut the trainees can easily access the machine via Write settings for the machine to a log file  function CreateVM($machineNo) { # Specify a name for the new VM $machineName = "$baseVMName-$machineNo" Write-Host "Creating VM: $machineName"       # Get the Azure VM Image      $myImage = Get-AzureVMImage $vmTemplate   #If the VM already exists delete and re-create it $existingVm = Get-AzureVM -Name $machineName -ServiceName $serviceName if($existingVm -ne $null) { Write-Host "VM already exists so deleting it" Remove-AzureVM -Name $machineName -ServiceName $serviceName }   "Creating Service" $serviceName = "bupa-azure-train-$machineName" Remove-AzureService -Force -ServiceName $serviceName New-AzureService -Location $dataCenter -ServiceName $serviceName   Write-Host "Creating VM: $machineName" New-AzureQuickVM -Windows -name $machineName -ServiceName $serviceName -ImageName $myImage.ImageName -InstanceSize $size -AdminUsername $adminUserName -Password $password  Write-Host "Updating the RDP endpoint for $machineName" Get-AzureVM -name $machineName -ServiceName $serviceName ` | Add-AzureEndpoint -Name RDP -Protocol TCP -LocalPort 3389 -PublicPort 550 ` | Update-AzureVM    Write-Host "Get the RDP File for machine $machineName" $machineRDPFilePath = "$rdpFilePath\$machineName.rdp" Get-AzureRemoteDesktopFile -name $machineName -ServiceName $serviceName -LocalPath "$machineRDPFilePath"   WriteMachineSettings "$machineName" "$serviceName" }    The delete machine settings function is used to delete the log file before we start re-running the process.  function DeleteMachineSettings() { Write-Host "Deleting the machine settings output file" [System.IO.File]::Delete("$machineSettingsPath"); }    The write machine settings function will get the VM and then record its details to the log file. The importance of the log file is that I can easily provide the information for all of the VM's to our infrastructure team to be able to configure access to all of the VM's    function WriteMachineSettings([string]$vmName, [string]$vmServiceName) { Write-Host "Writing to the machine settings output file"   $vm = Get-AzureVM -name $vmName -ServiceName $vmServiceName $vmEndpoint = Get-AzureEndpoint -VM $vm -Name RDP   $sb = new-object System.Text.StringBuilder $sb.Append("Service Name: "); $sb.Append($vm.ServiceName); $sb.Append(", "); $sb.Append("VM: "); $sb.Append($vm.Name); $sb.Append(", "); $sb.Append("RDP Public Port: "); $sb.Append($vmEndpoint.Port); $sb.Append(", "); $sb.Append("Public DNS: "); $sb.Append($vmEndpoint.Vip); $sb.AppendLine(""); [System.IO.File]::AppendAllText($machineSettingsPath, $sb.ToString());  } # end functions    Rest of Script In the rest of the script it is really just the bit that orchestrates the actions we want to happen. It will load the publisher settings, select the Azure subscription and then loop around the CreateVM function and create 16 VM's  Import-AzurePublishSettingsFile $azurePublisherSettings Set-AzureSubscription -SubscriptionName $subscriptionName -CurrentStorageAccount $defaultStorageAccount Select-AzureSubscription -SubscriptionName $subscriptionName  DeleteMachineSettings    "Starting creating Bupa International Azure Training Lab" $numberOfVMs = 16  for ($index=1; $index -le $numberOfVMs; $index++) { $vmNo = "$index" CreateVM($vmNo); }    "Finished creating Bupa International Azure Training Lab" # Give it a Minute Start-Sleep -s 60  $endTime = get-date "Script run time " + ($endTime - $startTime)    Conclusion As you can see there is nothing too fancy about this script but in our case of creating a small isolated training lab which is not connected to our corporate network then we can easily use this to provision the lab. Im sure if this is of use to anyone you can easily modify it to do other things with the lab environment too. A couple of points to note are that there are some soft limits in Azure about the number of cores and services your subscription can use. You may need to contact the Azure support team to be able to increase this limit. In terms of the real business value of this approach, it was not possible to use the existing desktops to do the training on, and getting some internal virtual machines would have been relatively expensive and time consuming for our ops team to do. With the Azure option we are able to spin these machines up for a temporary period during the training course and then throw them away when we are done. We expect the costing of this test lab to be very small, especially considering we have EA pricing. As a ball park I think my 18 lab VM training environment will cost in the region of $80 per day on our EA. This is a fraction of the cost of the creation of a single VM on premise.

  Read the article

• Configuring Oracle HTTP Server 12c for WebLogic Server Domain

  - by Emin Askerov

  Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• 6 Facts About GlassFish Announcement

  - by Bruno.Borges

  Since Oracle announced the end of commercial support for future Oracle GlassFish Server versions, the Java EE world has started wondering what will happen to GlassFish Server Open Source Edition. Unfortunately, there's a lot of misleading information going around. So let me clarify some things with facts, not FUD. Fact #1 - GlassFish Open Source Edition is not dead GlassFish Server Open Source Edition will remain the reference implementation of Java EE. The current trunk is where an implementation for Java EE 8 will flourish, and this will become the future GlassFish 5.0. Calling "GlassFish is dead" does no good to the Java EE ecosystem. The GlassFish Community will remain strong towards the future of Java EE. Without revenue-focused mind, this might actually help the GlassFish community to shape the next version, and set free from any ties with commercial decisions. Fact #2 - OGS support is not over As I said before, GlassFish Server Open Source Edition will continue. Main change is that there will be no more future commercial releases of Oracle GlassFish Server. New and existing OGS 2.1.x and 3.1.x commercial customers will continue to be supported according to the Oracle Lifetime Support Policy. In parallel, I believe there's no other company in the Java EE business that offers commercial support to more than one build of a Java EE application server. This new direction can actually help customers and partners, simplifying decision through commercial negotiations. Fact #3 - WebLogic is not always more expensive than OGS Oracle GlassFish Server ("OGS") is a build of GlassFish Server Open Source Edition bundled with a set of commercial features called GlassFish Server Control and license bundles such as Java SE Support. OGS has at the moment of this writing the pricelist of U$ 5,000 / processor. One information that some bloggers are mentioning is that WebLogic is more expensive than this. Fact 3.1: it is not necessarily the case. The initial edition of WebLogic is called "Standard Edition" and falls into a policy where some “Standard Edition” products are licensed on a per socket basis. As of current pricelist, US$ 10,000 / socket. If you do the math, you will realize that WebLogic SE can actually be significantly more cost effective than OGS, and a customer can save money if running on a CPU with 4 cores or more for example. Quote from the price list: “When licensing Oracle programs with Standard Edition One or Standard Edition in the product name (with the exception of Java SE Support, Java SE Advanced, and Java SE Suite), a processor is counted equivalent to an occupied socket; however, in the case of multi-chip modules, each chip in the multi-chip module is counted as one occupied socket.” For more details speak to your Oracle sales representative - this is clearly at list price and every customer typically has a relationship with Oracle (like they do with other vendors) and different contractual details may apply. And although OGS has always been production-ready for Java EE applications, it is no secret that WebLogic has always been more enterprise, mission critical application server than OGS since BEA. Different editions of WLS provide features and upgrade irons like the WebLogic Diagnostic Framework, Work Managers, Side by Side Deployment, ADF and TopLink bundled license, Web Tier (Oracle HTTP Server) bundled licensed, Fusion Middleware stack support, Oracle DB integration features, Oracle RAC features (such as GridLink), Coherence Management capabilities, Advanced HA (Whole Service Migration and Server Migration), Java Mission Control, Flight Recorder, Oracle JDK support, etc. Fact #4 - There’s no major vendor supporting community builds of Java EE app servers There are no major vendors providing support for community builds of any Open Source application server. For example, IBM used to provide community support for builds of Apache Geronimo, not anymore. Red Hat does not commercially support builds of WildFly and if I remember correctly, never supported community builds of former JBoss AS. Oracle has never commercially supported GlassFish Server Open Source Edition builds. Tomitribe appears to be the exception to the rule, offering commercial support for Apache TomEE. Fact #5 - WebLogic and GlassFish share several Java EE implementations It has been no secret that although GlassFish and WebLogic share some JSR implementations (as stated in the The Aquarium announcement: JPA, JSF, WebSockets, CDI, Bean Validation, JAX-WS, JAXB, and WS-AT) and WebLogic understands GlassFish deployment descriptors, they are not from the same codebase. Fact #6 - WebLogic is not for GlassFish what JBoss EAP is for WildFly WebLogic is closed-source offering. It is commercialized through a license-based plus support fee model. OGS although from an Open Source code, has had the same commercial model as WebLogic. Still, one cannot compare GlassFish/WebLogic to WildFly/JBoss EAP. It is simply not the same case, since Oracle has had two different products from different codebases. The comparison should be limited to GlassFish Open Source / Oracle GlassFish Server versus WildFly / JBoss EAP. But the message now is much clear: Oracle will commercially support only the proprietary product WebLogic, and invest on GlassFish Server Open Source Edition as the reference implementation for the Java EE platform and future Java EE 8, as a developer-friendly community distribution, and encourages community participation through Adopt a JSR and contributions to GlassFish. In comparison Oracle's decision has pretty much the same goal as to when IBM killed support for Websphere Community Edition; and to when Red Hat decided to change the name of JBoss Community Edition to WildFly, simplifying and clarifying marketing message and leaving the commercial field wide open to JBoss EAP only. Oracle can now, as any other vendor has already been doing, focus on only one commercial offer. Some users are saying they will now move to WildFly, but it is important to note that Red Hat does not offer commercial support for WildFly builds. Although the future JBoss EAP versions will come from the same codebase as WildFly, the builds will definitely not be the same, nor sharing 100% of their functionalities and bug fixes. This means there will be no company running a WildFly build in production with support from Red Hat. This discussion has also raised an important and interesting information: Oracle offers a free for developers OTN License for WebLogic. For other environments this is different, but please note this is the same policy Red Hat applies to JBoss EAP, as stated in their download page and terms. Oracle had the same policy for OGS. TL;DR; GlassFish Server Open Source Edition isn’t dead. Current and new OGS 2.x/3.x customers will continue to have support (respecting LSP). WebLogic is not necessarily more expensive than OGS. Oracle will focus on one commercially supported Java EE application server, like other vendors also limit themselves to support one build/product only. Community builds are hardly supported. Commercially supported builds of Open Source products are not exactly from the same codebase as community builds. What's next for GlassFish and the Java EE community? There are conversations in place to tackle some of the community desires, most of them stated by Markus Eisele in his blog post. We will keep you posted.

  Read the article

• Azure Diagnostics: The Bad, The Ugly, and a Better Way

  - by jasont

  If you’re a .Net web developer today, no doubt you’ve enjoyed watching Windows Azure grow up over the past couple of years. The platform has scaled, stabilized (mostly), and added on a slew of great (and sometimes overdue) features. What was once just an endpoint to host a solution, developers today have tremendous flexibility and options in the platform. Organizations are building new solutions and offerings on the platform, and others have, or are in the process of, migrating existing applications out of their own data centers into the Azure cloud. Whether new application development or migrating legacy, every development shop and IT organization needs to monitor their applications in the cloud, the same as they do on premises. Azure Diagnostics has some capabilities, but what I constantly hear from users is that it’s either (a) not enough, or (b) too cumbersome to set up. Today, Stackify is happy to announce that we fully support Azure deployments, just the same as your on-premises deployments. Let’s take a look below and compare and contrast the options. Azure Diagnostics Let’s crack open the Windows Azure documentation on Azure Diagnostics and see just how easy it is to use. The high level steps are:   Step 1: Import the Diagnostics Oh, I’ve already deployed my app without the diagnostics module. Guess I can’t do anything until I do this and re-deploy. Step 2: Configure the Diagnostics (and multiple sub-steps) Do I want it all? Or just pieces of it? Whoops, forgot to include a specific performance counter, I guess I’ll have to deploy again. Wait a minute… I have to specifically code these performance counters into my role’s OnStart() method, compile and deploy again? And query and consume it myself? Step 3: (Optional) Permanently store diagnostic data Lucky for me, Azure storage has gotten pretty cheap. But how often should I move the data into storage? I want to see real-time data, so I guess that’s out now as well. Step 4: (Optional) View stored diagnostic data Optional? Of course I want to see it. Conveniently, Microsoft recommends 3 tools to do this with. Un-conveniently, none of these are web based and they all just give you access to raw data, and very little charting or real-time intelligence. Just….. data. Nevermind that one product seems to have gotten stale since a recent acquisition, and doesn’t even have screenshots!   So, let’s summarize: lots of diagnostics data is available, but think realistically. Think Dev Ops. What happens when you are in the middle of a major production performance issue and you don’t have the diagnostics you need? You are redeploying an application (and thankfully you have a great branching strategy, so you feel perfectly safe just willy-nilly launching code into prod, don’t you?) to get data, then shipping it to storage, and then digging through that data to find a needle in a haystack. Would you like to be able to troubleshoot a performance issue in the middle of the night, or on a weekend, from your iPad or home computer’s web browser? Forget it: the best you get is this spark line in the Azure portal. If it’s real pointy, you probably have an issue; but since there is no alert based on a threshold your customers have likely already let you know. And high CPU, Memory, I/O, or Network doesn’t tell you anything about where the problem is. The Better Way – Stackify Stackify supports application and server monitoring in real time, all through a great web interface. All of the things that Azure Diagnostics provides, Stackify provides for your on-premises deployments, and you don’t need to know ahead of time that you’ll need it. It’s always there, it’s always on. Azure deployments are essentially no different than on-premises. It’s a Windows Server (or Linux) in the cloud. It’s behind a different firewall than your corporate servers. That’s it. Stackify can provide the same powerful tools to your Azure deployments in two simple steps. Step 1 Add a startup task to your web or worker role and deploy. If you can’t deploy and need it right now, no worries! Remote Desktop to the Azure instance and you can execute a Powershell script to download / install Stackify.   Step 2 Log in to your account at www.stackify.com and begin monitoring as much as you want, as often as you want and see the results instantly. WMI? It’s there Event Viewer? You’ve got it. File System Access? Yes, please! Would love to make sure my web.config is correct.   IIS / App Pool Info? Yep. You can even restart it. Running Services? All of them. Start and Stop them to your heart’s content. SQL Database access? You bet’cha. Alerts and Notification? Of course! You should know before your customers let you know. … and so much more.   Conclusion Microsoft has shown, consistently, that they love developers, developers, developers. What every developer needs to realize from this is that they’ve given you a canvas, which is exactly what Azure is. It’s great infrastructure that is readily available, easy to manage, and fairly cost effective. However, the tooling is your responsibility. What you get, at best, is bare bones. App and server diagnostics should be available when you need them. While we, as developers, try to plan for and think of everything ahead of time, there will come times where we need to get data that just isn’t available. And having to go through a lot of cumbersome steps to get that data, and then have to find a friendlier way to consume it…. well, that just doesn’t make a lot of sense to me. I’d rather spend my time writing and developing features and completing bug fixes for my applications, than to be writing code to monitor and diagnose.

  Read the article

• krb5-multidev, libk5crypto3, libk5crypto3:i386 package dependency

  - by TDalton

  Using Ubuntu 12.04 Asus U43F I can no longer update, install or remove packages via software center because of package dependency errors. sudo apt-get install -f reads the following: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libunity6 libqapt-runtime libboost-program-options1.46.1 akonadi-backend-mysql libqapt1 shared-desktop-ontologies libntrack0 ntrack-module-libnl-0 libntrack-qt4-1 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: krb5-multidev libk5crypto3:i386 libkrb5-dev Suggested packages: krb5-doc krb5-doc:i386 krb5-user:i386 The following packages will be upgraded: krb5-multidev libk5crypto3:i386 libkrb5-dev 3 upgraded, 0 newly installed, 0 to remove and 325 not upgraded. 11 not fully installed or removed. Need to get 0 B/213 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: error processing libk5crypto3 (--configure): libk5crypto3:amd64 1.10+dfsg~beta1-2ubuntu0.3 cannot be configured because libk5crypto3:i386 is in a different version (1.10+dfsg~beta1-2ubuntu0.1) dpkg: error processing libk5crypto3:i386 (--configure): libk5crypto3:i386 1.10+dfsg~beta1-2ubuntu0.1 cannot be configured because libk5crypto3:amd64 is in a different version (1.10+dfsg~beta1-2ubuntu0.3) dpkg: dependency problems prevent configuration of libkrb5-3: libkrb5-3 depends on libk5crypto3 (>= 1.9+dfsg~beta1); however:No apport report written because MaxReports is reached already Package libk5crypto3 is not configured yet. dpkg: error processing libkrb5-3 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgssapi-krb5-2: libgssapi-krb5-2 depends on libk5crypto3 (>= 1.8+dfsg); however: Package libk5crypto3 is not configured yet. libgssapi-krb5-2 depends on libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.3); however: Package libkrb5-3 is not configured yet. dpkg: error processing libgssapi-krb5-2 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgssrpc4: libgssrpc4 depends on libgssapi-krb5-2 (>= 1.10+dfsg~); however: Package libgssapi-krb5-2 is not configured yet. dpkg: error processing libgssrpc4 (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of libkadm5srv-mit8: libkadm5srv-mit8 depends on libgssapi-krb5-2 (>= 1.6.dfsg.2); however: Package libgssapi-krb5-2 is not configured yet. libkadm5srv-mit8 depends on libgssrpc4 (>= 1.6.dfsg.2); however: Package libgssrpc4 is not configured yet. libkadm5srv-mit8 depends on libk5crypto3 (>= 1.6.dfsg.2); however: Package libk5crypto3 is not configured yet. libkadm5srv-mit8 depends on libkrb5-3 (>= 1.9+dfsg~beta1); however: Package libkrb5-3 is not configured yet. dpkg: error processing libkadm5srv-mit8 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libkadm5clnt-mit8: libkadm5clnt-mit8 depends on libgssapi-krb5-2 (>= 1.10+dfsg~); however: Package libgssapi-krb5-2 is not configured yet. libkadm5clnt-mit8 depends on libgssrpc4 (>= 1.6.dfsg.2); however: Package libgssrpc4 is not configured yet.No apport report written because MaxReports is reached already libkadm5clnt-mit8 depends on libk5crypto3 (>= 1.6.dfsg.2); however: Package libk5crypto3 is not configured yet. libkadm5clnt-mit8 depends on libkrb5-3 (>= 1.8+dfsg); however: Package libkrb5-3 is not configured yet. dpkg: error processing libkadm5clnt-mit8 (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of krb5-multidev: krb5-multidev depends on libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libkrb5-3 on system is 1.10+dfsg~beta1-2ubuntu0.3. krb5-multidev depends on libk5crypto3 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libk5crypto3 on system is 1.10+dfsg~beta1-2ubuntu0.3. krb5-multidev depends on libgssapi-krb5-2 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libgssapi-krb5-2 on system is 1.10+dfsg~beta1-2ubuntu0.3. krb5-multidev depends on libgssrpc4 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libgssrpc4 on system is 1.10+dfsg~beta1-2ubuntu0.3. krb5-multidev depends on libkadm5srv-mit8 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libkadm5srv-mit8 on system is 1.10+dfsg~beta1-2ubuntu0.3. krb5-multidev depends on libkadm5clnt-mit8 (= 1.10+dfsg~beta1-2ubuntu0.2); however: Version of libkadm5clnt-mit8 on system is 1.10+dfsg~beta1-2ubuntu0.3. dpkg: error processing krb5-multidev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of libkrb5-dev: libkrb5-dev depends on krb5-multidev (= 1.10+dfsg~beta1-2ubuntu0.2); however: Package krb5-multidev is not configured yet. dpkg: error processing libkrb5-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of libkrb5-3:i386: libkrb5-3:i386 depends on libk5crypto3 (>= 1.9+dfsg~beta1); however: Package libk5crypto3:i386 is not configured yet. dpkg: error processing libkrb5-3:i386 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libgssapi-krb5-2:i386: libgssapi-krb5-2:i386 depends on libk5crypto3 (>= 1.8+dfsg); however: Package libk5crypto3:i386 is not configured yet. libgssapi-krb5-2:i386 depends on libkrb5-3 (= 1.10+dfsg~beta1-2ubuntu0.3); however: Package libkrb5-3:i386 is not configured yet. dpkg: error processing libgssapi-krb5-2:i386 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: libk5crypto3 libk5crypto3:i386 libkrb5-3 libgssapi-krb5-2 libgssrpc4 libkadm5srv-mit8 libkadm5clnt-mit8 krb5-multidev libkrb5-dev libkrb5-3:i386 libgssapi-krb5-2:i386 E: Sub-process /usr/bin/dpkg returned an error code (1) I have tried to fix the broken dependencies via synaptic package manager, but it returns with an error: E: libk5crypto3: libk5crypto3:amd64 1.10+dfsg~beta1-2ubuntu0.3 cannot be configured because libk5crypto3 E: libkrb5-3: dependency problems - leaving unconfigured E: libgssapi-krb5-2: dependency problems - leaving unconfigured E: libgssrpc4: dependency problems - leaving unconfigured E: libkadm5srv-mit8: dependency problems - leaving unconfigured E: libkadm5clnt-mit8: dependency problems - leaving unconfigured E: krb5-multidev: dependency problems - leaving unconfigured E: libkrb5-dev: dependency problems - leaving unconfigured I haven't gotten help from ubuntuforums.org on this issue. Please help, obi-wan

  Read the article

• Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

  - by kellsey.ruppel

  Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A.   Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student.  Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies".  There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience.  There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used.  With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler.  But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team.  In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes.  Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A:  The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues;  and 5) Constant prioritization of the issues for development to fix by the business.  It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

  Read the article

• Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

  - by Ritwik

  I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

  Read the article

• Displaylink USB show "Logo / Loading" on monitor

  - by Ken Le

  I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

  Read the article

• Benefits of Behavior Driven Development

  - by Aligned

  Originally posted on: http://geekswithblogs.net/Aligned/archive/2013/07/26/benefits-of-behavior-driven-development.aspxContinuing my previous article on BDD, I wanted to point out some benefits of BDD and since BDD is an extension of Test Driven Development (TDD), you get those as well. I’ll add another article on some possible downsides of this approach. There are many articles about the benefits of TDD and they apply to BDD. I’ve pointed out some here and copied some of the main points for each article, but there are many more including the book The Art of Unit Testing by Roy Osherove. http://geekswithblogs.net/leesblog/archive/2008/04/30/the-benefits-of-test-driven-development.aspx (Lee Brandt) Stability Accountability Design Ability Separated Concerns Progress Indicator http://tddftw.com/benefits-of-tdd/ Help maintainers understand the intention behind the code Bring validation and proper data handling concerns to the forefront. Writing the tests first is fun. Better APIs come from writing testable code. TDD will make you a better developer. http://www.slideshare.net/dhelper/benefit-from-unit-testing-in-the-real-world (from Typemock). Take a look at the slides, especially the extra time required for TDD (slide 10) and the next one of the bugs avoided using TDD (slide 11). Less bugs (slide 11) about testing and development (13) Increase confidence in code (14) Fearlessly change your code (14) Document Requirements (14) also see http://visualstudiomagazine.com/articles/2013/06/01/roc-rocks.aspx Discover usability issues early (14) All these points and articles are great and there are many more. The following are my additions to the benefits of BDD from using it in real projects for my company. July 2013 on MSDN - Behavior-Driven Design with SpecFlow Scott Allen did a very informative TDD and MVC module, but to me he is doing BDDCompile and Execute Requirements in Microsoft .NET ~ Video from TechEd 2012 Communication I was working through a complicated task that the decision tree kept growing. After writing out the Given, When, Then of the scenario, I was able tell QA what I had worked through for their initial test cases. They were able to add from there. It is also useful to use this language with other developers, managers, or clients to help make informed decisions on if it meets the requirements or if it can simplified to save time (money). Thinking through solutions, before starting to code This was the biggest benefit to me. I like to jump into coding to figure out the problem. Many times I don't understand my path well enough and have to do some parts over. A past supervisor told me several times during reviews that I need to get better at seeing "the forest for the trees". When I sit down and write out the behavior that I need to implement, I force myself to think things out further and catch scenarios before they get to QA. A co-worker that is new to BDD and we’ve been using it in our new project for the last 6 months, said “It really clarifies things”. It took him awhile to understand it all, but now he’s seeing the value of this approach (yes there are some downsides, but that is a different issue). Developers’ Confidence This is huge for me. With tests in place, my confidence grows that I won’t break code that I’m not directly changing. In the past, I’ve worked on projects with out tests and we would frequently find regression bugs (or worse the users would find them). That isn’t fun. We don’t catch all problems with the tests, but when QA catches one, I can write a test to make sure it doesn’t happen again. It’s also good for Releasing code, telling your manager that it’s good to go. As time goes on and the code gets older, how confident are you that checking in code won’t break something somewhere else? Merging code - pre release confidence If you’re merging code a lot, it’s nice to have the tests to help ensure you didn’t merge incorrectly. Interrupted work I had a task that I started and planned out, then was interrupted for a month because of different priorities. When I started it up again, and un-shelved my changes, I had the BDD specs and it helped me remember what I had figured out and what was left to do. It would have much more difficult without the specs and tests. Testing and verifying complicated scenarios Sometimes in the UI there are scenarios that get tricky, because there are a lot of steps involved (click here to open the dialog, enter the information, make sure it’s valid, when I click cancel it should do {x}, when I click ok it should close and do {y}, then do this, etc….). With BDD I can avoid some of the mouse clicking define the scenarios and have them re-run quickly, without using a mouse. UI testing is still needed, but this helps a bunch. The same can be true for tricky server logic. Documentation of Assumptions and Specifications The BDD spec tests (Jasmine or SpecFlow or other tool) also work as documentation and show what the original developer was trying to accomplish. It’s not a different Word document, so developers will keep this up to date, instead of letting it become obsolete. What happens if you leave the project (consulting, new job, etc) with no specs or at the least good comments in the code? Sometimes I think of a new scenario, so I add a failing spec and continue in the same stream of thought (don’t forget it because it was on a piece of paper or in a notepad). Then later I can come back and handle it and have it documented. Jasmine tests and JavaScript –> help deal with the non-typed system I like JavaScript, but I also dislike working with JavaScript. I miss C# telling me if a property doesn’t actually exist at build time. I like the idea of TypeScript and hope to use it more in the future. I also use KnockoutJs, which has observables that need to be called with ending (), since the observable is a function. It’s hard to remember when to use () or not and the Jasmine specs/tests help ensure the correct usage.   This should give you an idea of the benefits that I see in using the BDD approach. I’m sure there are more. It talks a lot of practice, investment and experimentation to figure out how to approach this and to get comfortable with it. I agree with Scott Allen in the video I linked above “Remember that TDD can take some practice. So if you're not doing test-driven design right now? You can start and practice and get better. And you'll reach a point where you'll never want to get back.”

  Read the article

• Likewise DomainJoin hangs on Finishing krb5.conf configuration

  - by dreay

  Hello, I have a problem when joining a CentOS release 5.4 (Final) x64 machine to the domain after running domainjoin-cli --loglevel info --log . join domain.local password I obtain the following, which seems to hang on "20100428112821:INFO:Finishing krb5.conf configuration" 20100428112817:INFO:Domainjoin invoked with the join command (remaining arguments will be printed later): 20100428112817:INFO: [/opt/likewise/bin/domainjoin-cli] 20100428112817:INFO: [--loglevel] 20100428112817:INFO: [info] 20100428112817:INFO: [--log] 20100428112817:INFO: [/tmp/join_1.log] 20100428112817:INFO: [join] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwsmd] 20100428112817:INFO:Daemon [/etc/init.d/lwsmd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwregd] 20100428112817:INFO:Daemon [/etc/init.d/lwregd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/netlogond] 20100428112817:INFO:Daemon [/etc/init.d/netlogond]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lwiod] 20100428112817:INFO:Daemon [/etc/init.d/lwiod]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/dcerpcd] 20100428112817:INFO:Daemon [/etc/init.d/dcerpcd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/eventlogd] 20100428112817:INFO:Daemon [/etc/init.d/eventlogd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Checking status of daemon [/etc/init.d/lsassd] 20100428112817:INFO:Daemon [/etc/init.d/lsassd]: status [0] 20100428112817:INFO:Domainjoin invoked with 2 arg(s) to the join command: 20100428112817:INFO: [domain.local] 20100428112817:INFO: [default.user] 20100428112817:INFO:Adding ops (fqdn ops.domain.local) to /etc/hosts ip 192.168.246.5, removing ops, ops.domain.local, ops, ops.domain.local 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpPkpAn5/etc/krb5.conf 20100428112817:INFO:Reading krb5 file /tmp/likewisetmpb6dkNX/etc/krb5.conf 20100428112817:INFO:Reading nsswitch file /etc/nsswitch.conf 20100428112817:INFO:Reading pam configuration 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/config-util 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sshd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.postfix 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su-l 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail-nox 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ekshell 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/run_init 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/screen 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/eject 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network-cmd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth-ac 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/kbdrate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp.sendmail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chsh 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/setup 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-switch-mail 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ksu 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/login 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo-i 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/smtp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/runuser 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/chfn 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/ppp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/gssftp 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/remote 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/reboot 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/newrole 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-powersave 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-auth 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/halt 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/other.rpmnew 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/atd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/passwd 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/authconfig-tui 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-hibernate 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/su 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/system-config-network 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/neat 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend-hybrid 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/crond 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/sudo 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/pm-suspend 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.d/poweroff 20100428112817:INFO:Reading pam file /tmp/likewisetmptrO2dQ/etc/pam.conf 20100428112817:INFO:File /tmp/likewisetmptrO2dQ/etc/pam.conf does not exist 20100428112817:INFO:Found config file /etc/ssh/sshd_config 20100428112817:INFO:Found binary /usr/sbin/sshd 20100428112817:INFO:Reading ssh file /etc/ssh/sshd_config 20100428112817:INFO:Found open sshd version 4.3.-1p2 20100428112817:INFO:Testing option ChallengeResponseAuthentication 20100428112817:INFO:Option ChallengeResponseAuthentication supported 20100428112817:INFO:Testing option UsePAM 20100428112817:INFO:Option UsePAM supported 20100428112817:INFO:Testing option PAMAuthenticationViaKBDInt 20100428112817:INFO:Option PAMAuthenticationViaKBDInt not supported 20100428112817:INFO:Testing option KbdInteractiveAuthentication 20100428112817:INFO:Option KbdInteractiveAuthentication supported 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPICleanupCredentials 20100428112817:INFO:Option GSSAPICleanupCredentials supported 20100428112817:INFO:Found config file /etc/ssh/ssh_config 20100428112817:INFO:Found binary /usr/bin/ssh 20100428112817:INFO:Reading ssh file /etc/ssh/ssh_config 20100428112817:INFO:Testing option GSSAPIAuthentication 20100428112817:INFO:Option GSSAPIAuthentication supported 20100428112817:INFO:Testing option GSSAPIDelegateCredentials 20100428112817:INFO:Option GSSAPIDelegateCredentials supported 20100428112821:INFO:Running module join 20100428112821:INFO:Starting krb5.conf configuration (enabling) 20100428112821:INFO:Reading krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:WARNING:Short domain name not specified. Defaulting to 'betgenius' 20100428112821:INFO:Failed to run lwinet ads trusts. This is expected if not yet joined to the domain 20100428112821:INFO:Failed to run lwiinfo --details -m. This is expected if the auth daemon is not running 20100428112821:INFO:Writing krb5 file /tmp/likewisetmpvgqQmT/etc/krb5.conf 20100428112821:INFO:File /tmp/likewisetmpvgqQmT/etc/krb5.conf modified 20100428112821:INFO:Finishing krb5.conf configuration Has anyone seen this error before? and know of the fix?

  Read the article

• Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

  - by WayneDV

  Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

  Read the article

• PHP+Apache as forward/reverse proxy: ¿how to process client requests and server responses in PHP?

  - by Lightworker

  Hi! I'm having a lot of troubles with the propper configuration of Apache mod_proxy.so to work as desired... The main idea, is to create a proxy on a local machine in a network wich will have the ability to proces a client request (client connected through this Apache prepared proxy) in PHP. And also, it will have the capacity to process the server responses on PHP too. Those are the 2 funcionalities, and they are independent one from each other. Let me present a little schema of what I need to achive: As you can see here, there're 2 ways: blue one and red one. For the blue one, I basically conected a client (Machine B - cell phone) on my local network (home) and configured it to go thorugh a proxy, wich is the Machine A (personal computer) on the exactly same network. So let's say (not DHCP): Machine A: 192.168.1.40 -- Apache is running on this machine, and configured to listen port 80. Machine B (cell phone): 192.168.1.75 -- configured to go throug a proxy, wich is IP 192.168.1.75 and port 80 (basically, Machine A). After configuring Apache properly, wich is basically to remove the "#" from httpd.conf on the lines for the mod_proxy.so (main worker), mod_proxy_connect.so (SSL, allowCONNECT, ...) and mod_proxy_http.so (needed for handle HTTP request/responses) and having in my case, lines like this: # Implements a proxy/gateway for Apache. Include "conf/extra/httpd-proxy.conf" # Various default settings Include "conf/extra/httpd-default.conf" # Secure (SSL/TLS) connections Include "conf/extra/httpd-ssl.conf" wich gives me the ability to configure the file httpd-proxy.conf to prepare the forward proxy or the reverse proxy. So I'm not sure, if what I need it's a forward proxy or a reverse one. For a forward proxy I've done this: <IfModule proxy_module> <IfModule proxy_http_module> # # FORWARD Proxy # #ProxyRequests Off ProxyRequests On ProxyVia On <Proxy *> Order deny,allow # Allow from all Deny from all Allow from 192.168.1 </Proxy> </IfModule> </IfModule> wich basically passes all the packets normally to the server and back to the client. I can trace it perfectly (and testing that works) looking at the "access.log" from Apache. Any request I make with the cell phone, appears then on the Apache log. So it works. But here come the problem: I need to process those client requests. And I need to do it, in PHP. I have read a lot about this. I've read in detail the oficial site from Apache about mod_proxy. And I've searched a lot on forums, but without luck. So I thought about a first aproximation: 1) Forward proxy in Apache, passes all the packets and it's not possible to process them. This seems to be true, so, what about a reverse proxy? So I envisioned something like: ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass http://www.google.com http://www.yahoo.com ProxyPassReverse http://www.google.com http://www.yahoo.com which is just a test, but this should cause on my cell phone that when trying to navigate to Google, I should be going to Yahoo, isn't it? But not. It doesn't work. So you really see, that ALL the examples on Apache reverse proxy, goes like: ProxyPass /foo http://foo.example.com/bar ProxyPassReverse /foo http://foo.example.com/bar wich means, that any kind of request in a local context, will be solved on a remote location. But what I needed is the inverse! It's that when asking for a remote site on my phone, I solve this request on my local server (the Apache one) to process it with a PHP module. So, if it's a forward proxy, I need to pass through PHP first. If it's a reverse proxy, I need to change the "going" direction to my local server one to process first on PHP. Then comes in mind second option: 2) I've seen something like: <Proxy http://example.com/foo/*> SetOutputFilter INCLUDES </Proxy> And I started to search for SetOutputFilter, SetInputFilter, AddOutputFilter and AddInputFilter. But I don't really know how can I use it. Seems to be good, or a solution to me, cause with somethin' like this, I should can add an Input filter to process on PHP the client requests and send back to the client what I programed/want (not the remote server response) wich is the BLUE path on schema, and I should have the ability to add an Output filter wich seems to give me the ability to process the remote server response befor sending it to the client, wich should be the RED path on the schema. Red path, it's just to read server responses and play with em. But nothing more. The Blue path, it's the important one. Cause I will send to the client whatever I want after procesing the requests. I so sorry for this amazingly big post, but I needed to explain it as well as I can. I hope someone will understand my problem, and will help me to solve it! Lot of thanks in advance!! :)

  Read the article

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320  | Next Page >