clustered index - Page 314

DialogFX: A New Approach to JavaFX Dialogs

- by HecklerMark

How would you like a quick and easy drop-in dialog box capability for JavaFX? That's what I was thinking when a weekend presented itself. And never being one to waste a good weekend... :-) After doing some "roll-your-own" basic dialog building for a JavaFX app, I recently stumbled across Anton Smirnov's work on GitHub. It was a good start, but it wasn't exactly what I was after, and ideas just kept popping up of things I'd do differently. I wanted something a bit more streamlined, a bit easier to just "drop in and use". And so DialogFX was born. DialogFX wasn't intended to be overly fancy, overly clever - just useful and robust. Here were my goals: Easy to use. A dialog "system" should be so simple to use a new developer can drop it in quickly with nearly no learning curve. A seasoned developer shouldn't even have to think, just tap in a few lines and go. Why should dialogs slow "actual development"? :-) Defaults. If you don't specify something (dialog type, buttons, etc.), a good dialog system should still work. It may not be pretty, but it shouldn't throw gears. Sharable. It's all open source. Even the icons are in the commons, so they can be reused at will. Let's take a look at some screen captures and the code used to produce them. DialogFX INFO dialog Screen captures Windows Mac Sample code DialogFX dialog = new DialogFX(); dialog.setTitleText("Info Dialog Box Example"); dialog.setMessage("This is an example of an INFO dialog box, created using DialogFX."); dialog.showDialog(); DialogFX ERROR dialog Screen captures Windows Mac Sample code DialogFX dialog = new DialogFX(Type.ERROR); dialog.setTitleText("Error Dialog Box Example"); dialog.setMessage("This is an example of an ERROR dialog box, created using DialogFX."); dialog.showDialog(); DialogFX ACCEPT dialog Screen captures Windows Mac Sample code DialogFX dialog = new DialogFX(Type.ACCEPT); dialog.setTitleText("Accept Dialog Box Example"); dialog.setMessage("This is an example of an ACCEPT dialog box, created using DialogFX."); dialog.showDialog(); DialogFX Question dialog (Yes/No) Screen captures Windows Mac Sample code DialogFX dialog = new DialogFX(Type.QUESTION); dialog.setTitleText("Question Dialog Box Example"); dialog.setMessage("This is an example of an QUESTION dialog box, created using DialogFX. Would you like to continue?"); dialog.showDialog(); DialogFX Question dialog (custom buttons) Screen captures Windows Mac Sample code List<String> buttonLabels = new ArrayList<>(2); buttonLabels.add("Affirmative"); buttonLabels.add("Negative"); DialogFX dialog = new DialogFX(Type.QUESTION); dialog.setTitleText("Question Dialog Box Example"); dialog.setMessage("This is an example of an QUESTION dialog box, created using DialogFX. This also demonstrates the automatic wrapping of text in DialogFX. Would you like to continue?"); dialog.addButtons(buttonLabels, 0, 1); dialog.showDialog(); A couple of things to note You may have noticed in that last example the addButtons(buttonLabels, 0, 1) call. You can pass custom button labels in and designate the index of the default button (responding to the ENTER key) and the cancel button (for ESCAPE). Optional parameters, of course, but nice when you may want them. Also, the showDialog() method actually returns the index of the button pressed. Rather than create EventHandlers in the dialog that really have little to do with the dialog itself, you can respond to the user's choice within the calling object. Or not. Again, it's your choice. :-) And finally, I've Javadoc'ed the code in the main places. Hopefully, this will make it easy to get up and running quickly and with a minimum of fuss. How Do I Get (Git?) It? To try out DialogFX, just point your browser here to the DialogFX GitHub repository and download away! Please take a look, try it out, and let me know what you think. All feedback welcome! All the best, Mark

Read the article

DHCPv6: Provide IPv6 information in your local network

Even though IPv6 might not be that important within your local network it might be good to get yourself into shape, and be able to provide some details of your infrastructure automatically to your network clients. This is the second article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. IPv6 addresses for everyone (in your network) Okay, after setting up the configuration of your local system, it might be interesting to enable all your machines in your network to use IPv6. There are two options to solve this kind of requirement... Either you're busy like a bee and you go around to configure each and every system manually, or you're more the lazy and effective type of network administrator and you prefer to work with Dynamic Host Configuration Protocol (DHCP). Obviously, I'm of the second type. Enabling dynamic IPv6 address assignments can be done with a new or an existing instance of a DHCPd. In case of Ubuntu-based installation this might be isc-dhcp-server. The isc-dhcp-server allows address pooling for IP and IPv6 within the same package, you just have to run to independent daemons for each protocol version. First, check whether isc-dhcp-server is already installed and maybe running your machine like so: $ service isc-dhcp-server6 status In case, that the service is unknown, you have to install it like so: $ sudo apt-get install isc-dhcp-server Please bear in mind that there is no designated installation package for IPv6. Okay, next you have to create a separate configuration file for IPv6 address pooling and network parameters called /etc/dhcp/dhcpd6.conf. This file is not automatically provided by the package, compared to IPv4. Again, use your favourite editor and put the following lines: $ sudo nano /etc/dhcp/dhcpd6.conf authoritative;default-lease-time 14400; max-lease-time 86400;log-facility local7;subnet6 2001:db8:bad:a55::/64 { option dhcp6.name-servers 2001:4860:4860::8888, 2001:4860:4860::8844; option dhcp6.domain-search "ios.mu"; range6 2001:db8:bad:a55::100 2001:db8:bad:a55::199; range6 2001:db8:bad:a55::/64 temporary;} Next, save the file and start the daemon as a foreground process to see whether it is going to listen to requests or not, like so: $ sudo /usr/sbin/dhcpd -6 -d -cf /etc/dhcp/dhcpd6.conf eth0 The parameters are explained quickly as -6 we want to run as a DHCPv6 server, -d we are sending log messages to the standard error descriptor (so you should monitor your /var/log/syslog file, too), and we explicitely want to use our newly created configuration file (-cf). You might also use the command switch -t to test the configuration file prior to running the server. In my case, I ended up with a couple of complaints by the server, especially reporting that the necessary lease file wouldn't exist. So, ensure that the lease file for your IPv6 address assignments is present: $ sudo touch /var/lib/dhcp/dhcpd6.leases$ sudo chown dhcpd:dhcpd /var/lib/dhcp/dhcpd6.leases Now, you should be good to go. Stop your foreground process and try to run the DHCPv6 server as a service on your system: $ sudo service isc-dhcp-server6 startisc-dhcp-server6 start/running, process 15883 Check your log file /var/log/syslog for any kind of problems. Refer to the man-pages of isc-dhcp-server and you might check out Chapter 22.6 of Peter Bieringer's IPv6 Howto. The instructions regarding DHCPv6 on the Ubuntu Wiki are not as complete as expected and it might not be as helpful as this article or Peter's HOWTO. But see for yourself. Does the client get an IPv6 address? Running a DHCPv6 server on your local network surely comes in handy but it has to work properly. The following paragraphs describe briefly how to check the IPv6 configuration of your clients, Linux - ifconfig or ip command First, you have enable IPv6 on your Linux by specifying the necessary directives in the /etc/network/interfaces file, like so: $ sudo nano /etc/network/interfaces iface eth1 inet6 dhcp Note: Your network device might be eth0 - please don't just copy my configuration lines. Then, either restart your network subsystem, or enable the device manually using the dhclient command with IPv6 switch, like so: $ sudo dhclient -6 You would either use the ifconfig or (if installed) the ip command to check the configuration of your network device like so: $ sudo ifconfig eth1eth1 Link encap:Ethernet HWaddr 00:1d:09:5d:8d:98 inet addr:192.168.160.147 Bcast:192.168.160.255 Mask:255.255.255.0 inet6 addr: 2001:db8:bad:a55::193/64 Scope:Global inet6 addr: fe80::21d:9ff:fe5d:8d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Looks good, the client has an IPv6 assignment. Now, let's see whether DNS information has been provided, too. $ less /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTENnameserver 2001:4860:4860::8888nameserver 2001:4860:4860::8844nameserver 192.168.1.2nameserver 127.0.1.1search ios.mu Nicely done. Windows - netsh Per description on TechNet the netsh is defined as following: "Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a computer that is currently running. Netsh also provides a scripting feature that allows you to run a group of commands in batch mode against a specified computer. Netsh can also save a configuration script in a text file for archival purposes or to help you configure other servers." And even though TechNet states that it applies to Windows Server (only), it is also available on Windows client operating systems, like Vista, Windows 7 and Windows 8. In order to get or even set information related to IPv6 protocol, we have to switch the netsh interface context prior to our queries. Open a command prompt in Windows and run the following statements: C:\Users\joki>netshnetsh>interface ipv6netsh interface ipv6>show interfaces Select the device index from the Idx column to get more details about the IPv6 address and DNS server information (here: I'm going to use my WiFi device with device index 11), like so: netsh interface ipv6>show address 11 Okay, address information has been provided. Now, let's check the details about DNS and resolving host names: netsh interface ipv6> show dnsservers 11 Okay, that looks good already. Our Windows client has a valid IPv6 address lease with lifetime information and details about the configured DNS servers. Talking about DNS server... Your clients should be able to connect to your network servers via IPv6 using hostnames instead of IPv6 addresses. Please read on about how to enable a local named with IPv6.

Read the article

Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (I)

- by ccasares

Adding attachments to a HumanTask is a feature that exists in Oracle HWF (Human Workflow) since 10g. However, in 11g there have been many improvements on this feature and this entry will try to summarize them. Oracle BPM 11g 11.1.1.5.1 (aka PS4 Feature Pack or PS4FP) introduced two great features: Ability to link attachments at a Task scope or at a Process scope: "Task" attachments are only visible within the scope (lifetime) of a task. This means that, initially, any member of the assignment pattern of the Human Task will be able to handle (add, review or remove) attachments. However, once the task is completed, subsequent human tasks will not have access to them. This does not mean those attachments got lost. Once the human task is completed, attachments can be retrieved in order to, i.e., check them in to a Content Server or to inject them to a new and different human task. Aside note: a "re-initiated" human task will inherit comments and attachments, along with history and -optionally- payload. See here for more info. "Process" attachments are visible within the scope of the process. This means that subsequent human tasks in the same process instance will have access to them. Ability to use Oracle WebCenter Content (previously known as "Oracle UCM") as the backend for the attachments instead of using HWF database backend. This feature adds all content server document lifecycle capabilities to HWF attachments (versioning, RBAC, metadata management, etc). As of today, only Oracle WCC is supported. However, Oracle BPM Suite does include a license of Oracle WCC for the solely usage of document management within BPM scope. Here are some code samples that leverage the above features. Retrieving uploaded attachments -Non UCM- Non UCM attachments (default ones or those that have existed from 10g, and are stored "as-is" in HWK database backend) can be retrieved after the completion of the Human Task. Firstly, we need to know whether any attachment has been effectively uploaded to the human task. There are two ways to find it out: Through an XPath function: Checking the execData/attachment[] structure. For example: Once we are sure one ore more attachments were uploaded to the Human Task, we want to get them. In this example, by "get" I mean to get the attachment name and the payload of the file. Aside note: Oracle HWF lets you to upload two kind of [non-UCM] attachments: a desktop document and a Web URL. This example focuses just on the desktop document one. In order to "retrieve" an uploaded Web URL, you can get it directly from the execData/attachment[] structure. Attachment content (payload) is retrieved through the getTaskAttachmentContents() XPath function: This example shows how to retrieve as many attachments as those had been uploaded to the Human Task and write them to the server using the File Adapter service. The sample process excerpt is as follows: A dummy UserTask using "HumanTask1" Human Task followed by a Embedded Subprocess that will retrieve the attachments (we're assuming at least one attachment is uploaded): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail: We've defined an XSD structure that will hold the attachments (both name and payload): Then, we can create a BusinessObject based on such element (attachmentCollection) and create a variable (named attachmentBPM) of such BusinessObject type. We will also need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a variable of type TaskExecutionData... ...and copy the HumanTask output execData to it: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentBPM variable with the name of each attachment and setting an empty value to the payload: Please note that we're using the XSLT for-each node to create as many target structures as necessary. Also note that we're setting an Empty text to the payload variable. The reason for this is to make sure the <payload></payload> tag gets created. This is needed when we map the payload to the XML variable later. Aside note: We are assuming that we're retrieving non-UCM attachments. However in real life you might want to check the type of attachment you're handling. The execData/attachment[]/storageType contains the values "UCM" for UCM type attachments, "TASK" for non-UCM ones or "URL" for Web URL ones. Those values are part of the "Ext.Com.Oracle.Xmlns.Bpel.Workflow.Task.StorageTypeEnum" enumeration. Once we have fed the attachmentsBPM structure and so it now contains the name of each of the attachments, it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsBPM/attachment[] element: In every iteration we will use a Script activity to map the corresponding payload element with the result of the XPath function getTaskAttachmentContents(). Please, note how the target array element is indexed with the loopCounter predefined variable, so that we make sure we're feeding the right element during the array iteration: The XPath function used looks as follows: hwf:getTaskAttachmentContents(bpmn:getDataObject('UserTask1LocalExecData')/ns1:systemAttributes/ns1:taskId, bpmn:getDataObject('attachmentsBPM')/ns:attachment[bpmn:getActivityInstanceAttribute('SUBPROCESS3067107484296', 'loopCounter')]/ns:fileName) where the input parameters are: taskId of the just completed Human Task attachment name we're retrieving the payload from array index (loopCounter predefined variable) Aside note: The reason whereby we're iterating the execData/attachment[] structure through embedded subprocess and not, i.e., using XSLT and for-each nodes, is mostly because the getTaskAttachmentContents() XPath function is currently not available in XSLT mappings. So all this example might be considered as a workaround until this gets fixed/enhanced in future releases. Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsBPM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsBPM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target): Second, we must set the target filename using the Service Properties dialog box: Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Handling UCM attachments will be part of a different and upcoming blog entry. Once I finish will all posts on this matter, I will upload the whole sample project to java.net.

Read the article

cannot connect with huawei e173 after upgrade to 12.10 using network manager

- by user104195

Since upgrade from 12.04 to 12.10 I can't connect to internet using mobile broadband modem Huawei e173. It worked earlier without problems and now it seems to be properly recognized (at least its connections appear in network manager applet), and after selecting connection manually it starts connection procedure. After about 20 seconds it returns to state disconnected. After browsing internet I've found that running network manager with: NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon After inserting modem I get: NetworkManager[507]: <warn> (ttyUSB2): failed to look up interface index NetworkManager[507]: <info> (ttyUSB2): new GSM/UMTS device (driver: 'option1' ifindex: 0) NetworkManager[507]: <info> (ttyUSB2): exported as /org/freedesktop/NetworkManager/Devices/2 NetworkManager[507]: <info> (ttyUSB2): now managed NetworkManager[507]: <info> (ttyUSB2): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'managed') [2] NetworkManager[507]: <info> (ttyUSB2): device state change: unavailable -> disconnected (reason 'none') [20 30 0] where 'failed to look up interface index' seems to be suspicious. After starting connecting: NetworkManager[507]: <info> Activation (ttyUSB2) starting connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> (ttyUSB2): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> need-auth (reason 'none') [40 60 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) started... NetworkManager[507]: <info> (ttyUSB2): device state change: need-auth -> prepare (reason 'none') [60 40 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 1 of 5 (Device Prepare) complete. NetworkManager[507]: <info> WWAN now enabled by management service NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) starting... NetworkManager[507]: <info> (ttyUSB2): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) successful. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 2 of 5 (Device Configure) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) started... NetworkManager[507]: <info> (ttyUSB2): device state change: config -> ip-config (reason 'none') [50 70 0] NetworkManager[507]: <info> starting PPP connection NetworkManager[507]: <info> pppd started with pid 663 NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 3 of 5 (IP Configure Start) complete. NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) started... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv6 Configure Timeout) complete. Plugin /usr/lib/pppd/2.4.5/nm-pppd-plugin.so loaded. ** Message: nm-ppp-plugin: (plugin_init): initializing ** Message: nm-ppp-plugin: (nm_phasechange): status 3 / phase 'serial connection' Removed stale lock on ttyUSB2 (pid 32146) using channel 23 NetworkManager[507]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[507]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. NetworkManager[507]: <warn> /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring... Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB2 ** Message: nm-ppp-plugin: (nm_phasechange): status 5 / phase 'establish' sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] NetworkManager[507]: <warn> pppd timed out or didn't initialize our dbus module NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[507]: <info> (ttyUSB2): device state change: ip-config -> failed (reason 'ip-config-unavailable') [70 120 5] NetworkManager[507]: <warn> Activation (ttyUSB2) failed for connection 'Plus - Dostep standardowy' NetworkManager[507]: <info> Activation (ttyUSB2) Stage 4 of 5 (IPv4 Configure Timeout) complete. NetworkManager[507]: <info> (ttyUSB2): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[507]: <info> (ttyUSB2): deactivating device (reason 'none') [0] Terminating on signal 15 ** Message: nm-ppp-plugin: (nm_phasechange): status 10 / phase 'terminate' sent [LCP TermReq id=0x2 "User request"] NetworkManager[507]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) where repeated: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x64b4024a> <pcomp> <accomp>] last for about 20 seconds. I've tried to downgrade network manager but failed due to many dependencies. Can anyone point me to solution or tell what should I do to further investigate the problem?

Read the article

A New Threat To Web Applications: Connection String Parameter Pollution (CSPP)

- by eric.maurice

Hi, this is Shaomin Wang. I am a security analyst in Oracle's Security Alerts Group. My primary responsibility is to evaluate the security vulnerabilities reported externally by security researchers on Oracle Fusion Middleware and to ensure timely resolution through the Critical Patch Update. Today, I am going to talk about a serious type of attack: Connection String Parameter Pollution (CSPP). Earlier this year, at the Black Hat DC 2010 Conference, two Spanish security researchers, Jose Palazon and Chema Alonso, unveiled a new class of security vulnerabilities, which target insecure dynamic connections between web applications and databases. The attack called Connection String Parameter Pollution (CSPP) exploits specifically the semicolon delimited database connection strings that are constructed dynamically based on the user inputs from web applications. CSPP, if carried out successfully, can be used to steal user identities and hijack web credentials. CSPP is a high risk attack because of the relative ease with which it can be carried out (low access complexity) and the potential results it can have (high impact). In today's blog, we are going to first look at what connection strings are and then review the different ways connection string injections can be leveraged by malicious hackers. We will then discuss how CSPP differs from traditional connection string injection, and the measures organizations can take to prevent this kind of attacks. In web applications, a connection string is a set of values that specifies information to connect to backend data repositories, in most cases, databases. The connection string is passed to a provider or driver to initiate a connection. Vendors or manufacturers write their own providers for different databases. Since there are many different providers and each provider has multiple ways to make a connection, there are many different ways to write a connection string. Here are some examples of connection strings from Oracle Data Provider for .Net/ODP.Net: Oracle Data Provider for .Net / ODP.Net; Manufacturer: Oracle; Type: .NET Framework Class Library: - Using TNS Data Source = orcl; User ID = myUsername; Password = myPassword; - Using integrated security Data Source = orcl; Integrated Security = SSPI; - Using the Easy Connect Naming Method Data Source = username/password@//myserver:1521/my.server.com - Specifying Pooling parameters Data Source=myOracleDB; User Id=myUsername; Password=myPassword; Min Pool Size=10; Connection Lifetime=120; Connection Timeout=60; Incr Pool Size=5; Decr Pool Size=2; There are many variations of the connection strings, but the majority of connection strings are key value pairs delimited by semicolons. Attacks on connection strings are not new (see for example, this SANS White Paper on Securing SQL Connection String). Connection strings are vulnerable to injection attacks when dynamic string concatenation is used to build connection strings based on user input. When the user input is not validated or filtered, and malicious text or characters are not properly escaped, an attacker can potentially access sensitive data or resources. For a number of years now, vendors, including Oracle, have created connection string builder class tools to help developers generate valid connection strings and potentially prevent this kind of vulnerability. Unfortunately, not all application developers use these utilities because they are not aware of the danger posed by this kind of attacks. So how are Connection String parameter Pollution (CSPP) attacks different from traditional Connection String Injection attacks? First, let's look at what parameter pollution attacks are. Parameter pollution is a technique, which typically involves appending repeating parameters to the request strings to attack the receiving end. Much of the public attention around parameter pollution was initiated as a result of a presentation on HTTP Parameter Pollution attacks by Stefano Di Paola and Luca Carettoni delivered at the 2009 Appsec OWASP Conference in Poland. In HTTP Parameter Pollution attacks, an attacker submits additional parameters in HTTP GET/POST to a web application, and if these parameters have the same name as an existing parameter, the web application may react in different ways depends on how the web application and web server deal with multiple parameters with the same name. When applied to connections strings, the rule for the majority of database providers is the "last one wins" algorithm. If a KEYWORD=VALUE pair occurs more than once in the connection string, the value associated with the LAST occurrence is used. This opens the door to some serious attacks. By way of example, in a web application, a user enters username and password; a subsequent connection string is generated to connect to the back end database. Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; In the password field, if the attacker enters "xxx; Integrated Security = true", the connection string becomes, Data Source = myDataSource; Initial Catalog = db; Integrated Security = no; User ID = myUsername; Password = XXX; Intergrated Security = true; Under the "last one wins" principle, the web application will then try to connect to the database using the operating system account under which the application is running to bypass normal authentication. CSPP poses serious risks for unprepared organizations. It can be particularly dangerous if an Enterprise Systems Management web front-end is compromised, because attackers can then gain access to control panels to configure databases, systems accounts, etc. Fortunately, organizations can take steps to prevent this kind of attacks. CSPP falls into the Injection category of attacks like Cross Site Scripting or SQL Injection, which are made possible when inputs from users are not properly escaped or sanitized. Escaping is a technique used to ensure that characters (mostly from user inputs) are treated as data, not as characters, that is relevant to the interpreter's parser. Software developers need to become aware of the danger of these attacks and learn about the defenses mechanism they need to introduce in their code. As well, software vendors need to provide templates or classes to facilitate coding and eliminate developers' guesswork for protecting against such vulnerabilities. Oracle has introduced the OracleConnectionStringBuilder class in Oracle Data Provider for .NET. Using this class, developers can employ a configuration file to provide the connection string and/or dynamically set the values through key/value pairs. It makes creating connection strings less error-prone and easier to manager, and ultimately using the OracleConnectionStringBuilder class provides better security against injection into connection strings. For More Information: - The OracleConnectionStringBuilder is located at http://download.oracle.com/docs/cd/B28359_01/win.111/b28375/OracleConnectionStringBuilderClass.htm - Oracle has developed a publicly available course on preventing SQL Injections. The Server Technologies Curriculum course "Defending Against SQL Injection Attacks!" is located at http://st-curriculum.oracle.com/tutorial/SQLInjection/index.htm - The OWASP web site also provides a number of useful resources. It is located at http://www.owasp.org/index.php/Main_Page

Read the article

CodePlex Daily Summary for Monday, May 31, 2010

CodePlex Daily Summary for Monday, May 31, 2010New ProjectsAndrew's XNA Helpers: A collection of simple, yet useful methods and ways of accessing crucial variables such as the ContentManager or SpriteBatch from anywhere in your ...BASIC-DOS: BASIC-DOS OS Makes It Easier For People To Use DOS As It Comes With An Graphical User Interface That Loads Up During Boot Up. No Need To Type Any C...Chirpy - Visual Studio Add In For Handling Js, Css, and DotLess Files: Mashes, minifies, and validates your javascript, stylesheet, and dotless files.fprparser: Fortify XML Report parser in the form of an Excel Add-inHL7ToXmlConverter: Class library to transform HL7 Version 2.x to HL7Xml Version 2 depends on the used HL7 grammar.imdb movie downloader: basically download info from imdb and it s realy FAST ! need some development about thread pooling and webclient issues.. just try ;) for it run ...IMIfmoOptimisation: Задание по оптимизацииMarketView: MarketViewMediaStreamSources: 这是 CodePlex 上第一个可以呈现视频的 MediaStreamSource 项目。Migrate User Profile Values: A tool to move values between SharePoint 2007 User Profiles. The console application MigrateUserProfileValues.exe will export User Profile values ...Nexus6Studio Development Space: This is a working repository for development efforst of the Nexus6studio team.Project BlueLabel: BlueLabelSergioTools: SergioTools is a collection of tools and sample codes to help C# developers to improve your productivity and skills.SharePoint Property Bag Settings 2010: The Property Bag Settings can store any metadata as Key-Value pairs such as connection strings, server names, file paths, and other miscellaneous s...Silverlight Isolated Storage Cache: IsoCache is a small framework the make it easy to store dll's and xap files in the isolated storage so they can be use to speed up the startup of t...StackPivot: StackPivot is an app which can generate Microsoft Pivot "Collections" on-the-fly based on the data collected from the Stack Exchange APIs. Its d...Suspension Calculator: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...TFS Timesheets: A custom work item control for Team Foundation Server that allows timesheet data to be captured against a work item.Umbraco Membership infrastructure: Improvements to the Umbraco membership API implemented as a package. Includes user properties and improved membership API support.VolgaTransTelecomClient: VolgaTransTelecomClient makes it easier for clients of "Volga TransTelecom" company to get info about account. It's developed in C#.Wouter's SharePoint Demo Land: This site contains many of the SharePoint demos that I create while training or hobbying, both for the 2007 and the 2010 release. Please click the...New ReleasesAgUnit - Silverlight unit testing with ReSharper: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1-ReSharper5.0.zip into the "Bin\Plugins\" folder of your ReSharper installatio...Andrew's XNA Helpers: Andrew's XNA Helpers v1: My first version of my Library of XNA Helpers. Includes: Variables class - A static class that can be accessed anywhere throughout your project -...Clean your Database: Database Cleaner Setup: Database Cleaner SetupClean your Database: Database Cleaner Source: Database Cleaner Source codeCommunity Forums NNTP bridge: Community Forums NNTP Bridge V16: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V17: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release is prim...Folder Bookmarks: Folder Bookmarks 1.5.8: The latest version of Folder Bookmarks (1.5.8), with new GUI improvements and 'Help' feature - all the instructions needed to use the software (If ...HL7ToXmlConverter: HL7ToXmlConverter Version 0.0.0.9: First distribution on codepleximdb movie downloader: 0.9 Fist Tryout of MyImdb SourceCode: Fist Tryout of MyImdb SourceCodeLightweight Fluent Workflow: Objectflow 1.0.0.2: The features of this release take advantage of .Net 3.5 featrures; Lamda support is back for Constraints and Functions can now be used in workflows...MDownloader: MDownloader-0.15.16.59384: Fixed password detector in context of .rar files. Fixed FileFactory provider implementation. Fixed detection of internet connection failures.MediaStreamSources: MediaStreamSources 1.0 Beta1: 1.0 Beta1Mongodb Management Studio: Mongodb Management Studio v1.1: MongodbManagementStudio v1.1 1.服务器管理功能添加服务器,删除服务器 2.服务器,数据库,表,列,索引,树形显示和状态信息查看 3.查询分析器功能. 支持select,insert,Delete,update 支持自定义分页函数 $rowid(1,5) 查询...Multiplayer Quiz: Release 1_7_1_0: Latest Release. .NET 4.0 required to run server, and recommended for client. Download: http://www.microsoft.com/downloads/details.aspx?FamilyID=9cf...SCSM PowerShell Cmdlets: SCSM PowerShell Cmdlets Version 0.1.1: First release! This is a minimal build with limited funcitonallity. Should be handled as a preview of what's to come. Included Cmdlets are: New-...SharePoint Property Bag Settings 2010: PropertyBagSettings2010.wsp: The SharePoint Property Bag Settings is a reusable component that you can include in your own SharePoint applications. It can store simple types, s...Sharp Tests Ex: Sharp Tests Ex 1.0.0RTM: Project Description #TestsEx (Sharp Tests Extensions) is a set of extensible extensions. The main target is write short assertions where the Visual...Silverlight Testing Automation Tool: StatLight V1.1: FeaturesApplied some UnitDriven specific changes from justncase80/StatLight Updated to the 0.0.5 release over on rul:UnitDriven.codeplex.com Upda...SQL Server 2005 and 2008 - Backup, Integrity Check and Index Optimization: 30 May 2010: This is the latest version of my solution for Backup, Integrity Check and Index Optimization in SQL Server 2005, SQL Server 2008 and SQL Server 200...Suspension Calculator: SuspensionCalculator_V1.0.0.29: The Suspension Calculator aims to help people who are building race cars perform suspension related calculations. The calculations vary from motion...Svn2Svn: copy, sync, replay or reflect changes across SVN repositories: 1.2 (Beta): Build 1.2.8932.0. Added /incremental (/i) mode, svn2svn detects all previously synced revisions and starts at the latest revision that has not bee...VCC: Latest build, v2.1.30530.0: Automatic drop of latest buildVolgaTransTelecomClient: V.1.0.2.0: v.1.0.2.0 releaseWatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.01: changes CSS Fixed for the Microsoft Internet ExplorerWouter's SharePoint Demo Land: Navigation Service Basic: This sample shows how to create a simple Service Application for SharePoint 2010. You can read up on the how and why on my blog series about Serv...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsCommunity Forums NNTP bridgeAStar.netpatterns & practices – Enterprise LibraryBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationMirror Testing SystemIonics Isapi Rewrite FilterCustomer Portal Accelerator for Microsoft Dynamics CRMN2 CMSpatterns & practices: Windows Azure Security Guidance

Read the article

How to block the ASP.NET page while ajax UpdateProgress is being displayed.

Step 1: Copy the following styles to your aspx page. <style type="text/css"> .hide { display: none; } .show { display: inherit; } .progressBackgroundFilter { position: absolute; top: 0px; bottom: 0px; left: 0px; right: 0px; overflow: hidden; padding: 0; margin: 0; background-color: #000; filter: alpha(opacity=50); opacity: 0.5; z-index: 1000; } .processMessage { position: absolute; font-family:Verdana; font-size:12px; font-weight:normal; color:#000066; top: 30%; left: 43%; padding: 10px; width: 18%; z-index: 1001; background-color: #fff; } </style> Step 2: Put the divs as shown below in UpdateProgress control. <asp:UpdateProgress ID="updPrgsBaselineTab" runat="server"> <ProgressTemplate> <div id="progressBackgroundFilter" class="progressBackgroundFilter"> </div> <div id="processMessage" class="processMessage"> <table width="100%"> <tr style="width: 100%"> <td style="width: 100%"> Please Wait.......... </td> </tr> <tr style="width: 100%"> <td style="width: 100%" align="center"> <img src="../Images/Update_Progress.gif" /> </td> </tr> </table> </div> </ProgressTemplate> </asp:UpdateProgress> span.fullpost {display:none;}

Read the article

Anatomy of a .NET Assembly - CLR metadata 1

- by Simon Cooper

Before we look at the bytes comprising the CLR-specific data inside an assembly, we first need to understand the logical format of the metadata (For this post I only be looking at simple pure-IL assemblies; mixed-mode assemblies & other things complicates things quite a bit). Metadata streams Most of the CLR-specific data inside an assembly is inside one of 5 streams, which are analogous to the sections in a PE file. The name of each section in a PE file starts with a ., and the name of each stream in the CLR metadata starts with a #. All but one of the streams are heaps, which store unstructured binary data. The predefined streams are: #~ Also called the metadata stream, this stream stores all the information on the types, methods, fields, properties and events in the assembly. Unlike the other streams, the metadata stream has predefined contents & structure. #Strings This heap is where all the namespace, type & member names are stored. It is referenced extensively from the #~ stream, as we'll be looking at later. #US Also known as the user string heap, this stream stores all the strings used in code directly. All the strings you embed in your source code end up in here. This stream is only referenced from method bodies. #GUID This heap exclusively stores GUIDs used throughout the assembly. #Blob This heap is for storing pure binary data - method signatures, generic instantiations, that sort of thing. Items inside the heaps (#Strings, #US, #GUID and #Blob) are indexed using a simple binary offset from the start of the heap. At that offset is a coded integer giving the length of that item, then the item's bytes immediately follow. The #GUID stream is slightly different, in that GUIDs are all 16 bytes long, so a length isn't required. Metadata tables The #~ stream contains all the assembly metadata. The metadata is organised into 45 tables, which are binary arrays of predefined structures containing information on various aspects of the metadata. Each entry in a table is called a row, and the rows are simply concatentated together in the file on disk. For example, each row in the TypeRef table contains: A reference to where the type is defined (most of the time, a row in the AssemblyRef table). An offset into the #Strings heap with the name of the type An offset into the #Strings heap with the namespace of the type. in that order. The important tables are (with their table number in hex): 0x2: TypeDef 0x4: FieldDef 0x6: MethodDef 0x14: EventDef 0x17: PropertyDef Contains basic information on all the types, fields, methods, events and properties defined in the assembly. 0x1: TypeRef The details of all the referenced types defined in other assemblies. 0xa: MemberRef The details of all the referenced members of types defined in other assemblies. 0x9: InterfaceImpl Links the types defined in the assembly with the interfaces that type implements. 0xc: CustomAttribute Contains information on all the attributes applied to elements in this assembly, from method parameters to the assembly itself. 0x18: MethodSemantics Links properties and events with the methods that comprise the get/set or add/remove methods of the property or method. 0x1b: TypeSpec 0x2b: MethodSpec These tables provide instantiations of generic types and methods for each usage within the assembly. There are several ways to reference a single row within a table. The simplest is to simply specify the 1-based row index (RID). The indexes are 1-based so a value of 0 can represent 'null'. In this case, which table the row index refers to is inferred from the context. If the table can't be determined from the context, then a particular row is specified using a token. This is a 4-byte value with the most significant byte specifying the table, and the other 3 specifying the 1-based RID within that table. This is generally how a metadata table row is referenced from the instruction stream in method bodies. The third way is to use a coded token, which we will look at in the next post. So, back to the bytes Now we've got a rough idea of how the metadata is logically arranged, we can now look at the bytes comprising the start of the CLR data within an assembly: The first 8 bytes of the .text section are used by the CLR loader stub. After that, the CLR-specific data starts with the CLI header. I've highlighted the important bytes in the diagram. In order, they are: The size of the header. As the header is a fixed size, this is always 0x48. The CLR major version. This is always 2, even for .NET 4 assemblies. The CLR minor version. This is always 5, even for .NET 4 assemblies, and seems to be ignored by the runtime. The RVA and size of the metadata header. In the diagram, the RVA 0x20e4 corresponds to the file offset 0x2e4 Various flags specifying if this assembly is pure-IL, whether it is strong name signed, and whether it should be run as 32-bit (this is how the CLR differentiates between x86 and AnyCPU assemblies). A token pointing to the entrypoint of the assembly. In this case, 06 (the last byte) refers to the MethodDef table, and 01 00 00 refers to to the first row in that table. (after a gap) RVA of the strong name signature hash, which comes straight after the CLI header. The RVA 0x2050 corresponds to file offset 0x250. The rest of the CLI header is mainly used in mixed-mode assemblies, and so is zeroed in this pure-IL assembly. After the CLI header comes the strong name hash, which is a SHA-1 hash of the assembly using the strong name key. After that comes the bodies of all the methods in the assembly concatentated together. Each method body starts off with a header, which I'll be looking at later. As you can see, this is a very small assembly with only 2 methods (an instance constructor and a Main method). After that, near the end of the .text section, comes the metadata, containing a metadata header and the 5 streams discussed above. We'll be looking at this in the next post. Conclusion The CLI header data doesn't have much to it, but we've covered some concepts that will be important in later posts - the logical structure of the CLR metadata and the overall layout of CLR data within the .text section. Next, I'll have a look at the contents of the #~ stream, and how the table data is arranged on disk.

Read the article

Changing CSS with jQuery syntax in Silverlight using jLight

- by Timmy Kokke

Lately I’ve ran into situations where I had to change elements or had to request a value in the DOM from Silverlight. jLight, which was introduced in an earlier article, can help with that. jQuery offers great ways to change CSS during runtime. Silverlight can access the DOM, but it isn’t as easy as jQuery. All examples shown in this article can be looked at in this online demo. The code can be downloaded here. Part 1: The easy stuff Selecting and changing properties is pretty straight forward. Setting the text color in all <B> </B> elements can be done using the following code: jQuery.Select("b").Css("color", "red"); The Css() method is an extension method on jQueryObject which is return by the jQuery.Select() method. The Css() method takes to parameters. The first is the Css style property. All properties used in Css can be entered in this string. The second parameter is the value you want to give the property. In this case the property is “color” and it is changed to “red”. To specify which element you want to select you can add a :selector parameter to the Select() method as shown in the next example. jQuery.Select("b:first").Css("font-family", "sans-serif"); The “:first” pseudo-class selector selects only the first element. This example changes the “font-family” property of the first <B></B> element to “sans-serif”. To make use of intellisense in Visual Studio I’ve added a extension methods to help with the pseudo-classes. In the example below the “font-weight” of every “Even” <LI></LI> is set to “bold”. jQuery.Select("li".Even()).Css("font-weight", "bold"); Because the Css() extension method returns a jQueryObject it is possible to chain calls to Css(). The following example show setting the “color”, “background-color” and the “font-size” of all headers in one go. jQuery.Select(":header").Css("color", "#12FF70") .Css("background-color", "yellow") .Css("font-size", "25px"); Part 2: More complex stuff In only a few cases you need to change only one style property. More often you want to change an entire set op style properties all in one go. You could chain a lot of Css() methods together. A better way is to add a class to a stylesheet and define all properties in there. With the AddClass() method you can set a style class to a set of elements. This example shows how to add the “demostyle” class to all <B></B> in the document. jQuery.Select("b").AddClass("demostyle"); Removing the class works in the same way: jQuery.Select("b").RemoveClass("demostyle"); jLight is build for interacting with to the DOM from Silverlight using jQuery. A jQueryObjectCss object can be used to define different sets of style properties in Silverlight. The over 60 most common Css style properties are defined in the jQueryObjectCss class. A string indexer can be used to access all style properties ( CssObject1[“background-color”] equals CssObject1.BackgroundColor). In the code below, two jQueryObjectCss objects are defined and instantiated. private jQueryObjectCss CssObject1; private jQueryObjectCss CssObject2; public Demo2() { CssObject1 = new jQueryObjectCss { BackgroundColor = "Lime", Color="Black", FontSize = "12pt", FontFamily = "sans-serif", FontWeight = "bold", MarginLeft = 150, LineHeight = "28px", Border = "Solid 1px #880000" }; CssObject2 = new jQueryObjectCss { FontStyle = "Italic", FontSize = "48", Color = "#225522" }; InitializeComponent(); } Now instead of chaining to set all different properties you can just pass one of the jQueryObjectCss objects to the Css() method. In this case all <LI></LI> elements are set to match this object. jQuery.Select("li").Css(CssObject1); When using the jQueryObjectCss objects chaining is still possible. In the following example all headers are given a blue backgroundcolor and the last is set to match CssObject2. jQuery.Select(":header").Css(new jQueryObjectCss{BackgroundColor = "Blue"}) .Eq(-1).Css(CssObject2); Part 3: The fun stuff Having Silverlight call JavaScript and than having JavaScript to call Silverlight requires a lot of plumbing code. Everything has to be registered and strings are passed back and forth to execute the JavaScript. jLight makes this kind of stuff so easy, it becomes fun to use. In a lot of situations jQuery can call a function to decide what to do, setting a style class based on complex expressions for example. jLight can do the same, but the callback methods are defined in Silverlight. This example calls the function() method for each <LI></LI> element. The callback method has to take a jQueryObject, an integer and a string as parameters. In this case jLight differs a bit from the actual jQuery implementation. jQuery uses only the index and the className parameters. A jQueryObject is added to make it simpler to access the attributes and properties of the element. If the text of the listitem starts with a ‘D’ or an ‘M’ the class is set. Otherwise null is returned and nothing happens. private void button1_Click(object sender, RoutedEventArgs e) { jQuery.Select("li").AddClass(function); } private string function(jQueryObject obj, int index, string className) { if (obj.Text[0] == 'D' || obj.Text[0] == 'M') return "demostyle"; return null; } The last thing I would like to demonstrate uses even more Silverlight and less jLight, but demonstrates the power of the combination. Animating a style property using a Storyboard with easing functions. First a dependency property is defined. In this case it is a double named Intensity. By handling the changed event the color is set using jQuery. public double Intensity { get { return (double)GetValue(IntensityProperty); } set { SetValue(IntensityProperty, value); } } public static readonly DependencyProperty IntensityProperty = DependencyProperty.Register("Intensity", typeof(double), typeof(Demo3), new PropertyMetadata(0.0, IntensityChanged)); private static void IntensityChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var i = (byte)(double)e.NewValue; jQuery.Select("span").Css("color", string.Format("#{0:X2}{0:X2}{0:X2}", i)); } An animation has to be created. This code defines a Storyboard with one keyframe that uses a bounce ease as an easing function. The animation is set to target the Intensity dependency property defined earlier. private Storyboard CreateAnimation(double value) { Storyboard storyboard = new Storyboard(); var da = new DoubleAnimationUsingKeyFrames(); var d = new EasingDoubleKeyFrame { EasingFunction = new BounceEase(), KeyTime = KeyTime.FromTimeSpan(TimeSpan.FromSeconds(1.0)), Value = value }; da.KeyFrames.Add(d); Storyboard.SetTarget(da, this); Storyboard.SetTargetProperty(da, new PropertyPath(Demo3.IntensityProperty)); storyboard.Children.Add(da); return storyboard; } Initially the Intensity is set to 128 which results in a gray color. When one of the buttons is pressed, a new animation is created an played. One to animate to black, and one to animate to white. public Demo3() { InitializeComponent(); Intensity = 128; } private void button2_Click(object sender, RoutedEventArgs e) { CreateAnimation(255).Begin(); } private void button3_Click(object sender, RoutedEventArgs e) { CreateAnimation(0).Begin(); } Conclusion As you can see jLight can make the life of a Silverlight developer a lot easier when accessing the DOM. Almost all jQuery functions that are defined in jLight use the same constructions as described above. I’ve tried to stay as close as possible to the real jQuery. Having JavaScript perform callbacks to Silverlight using jLight will be described in more detail in a future tutorial about AJAX or eventing.

Read the article

WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

- by arungupta

WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean { @WebSocketMessage public String sayHello(String name) { return "Hello " + name + "!"; }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action=""> <input onclick="say_hello()" value="Say Hello" type="button"> <input id="nameField" name="name" value="WebSocket" type="text"><br> </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello"; var websocket = new WebSocket(wsUri); websocket.onopen = function(evt) { onOpen(evt) }; websocket.onmessage = function(evt) { onMessage(evt) }; websocket.onerror = function(evt) { onError(evt) }; function init() { output = document.getElementById("output"); } function say_hello() { websocket.send(nameField.value); writeToScreen("SENT: " + nameField.value); } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

Read the article

tile_static, tile_barrier, and tiled matrix multiplication with C++ AMP

- by Daniel Moth

We ended the previous post with a mechanical transformation of the C++ AMP matrix multiplication example to the tiled model and in the process introduced tiled_index and tiled_grid. This is part 2. tile_static memory You all know that in regular CPU code, static variables have the same value regardless of which thread accesses the static variable. This is in contrast with non-static local variables, where each thread has its own copy. Back to C++ AMP, the same rules apply and each thread has its own value for local variables in your lambda, whereas all threads see the same global memory, which is the data they have access to via the array and array_view. In addition, on an accelerator like the GPU, there is a programmable cache, a third kind of memory type if you'd like to think of it that way (some call it shared memory, others call it scratchpad memory). Variables stored in that memory share the same value for every thread in the same tile. So, when you use the tiled model, you can have variables where each thread in the same tile sees the same value for that variable, that threads from other tiles do not. The new storage class for local variables introduced for this purpose is called tile_static. You can only use tile_static in restrict(direct3d) functions, and only when explicitly using the tiled model. What this looks like in code should be no surprise, but here is a snippet to confirm your mental image, using a good old regular C array // each tile of threads has its own copy of locA, // shared among the threads of the tile tile_static float locA[16][16]; Note that tile_static variables are scoped and have the lifetime of the tile, and they cannot have constructors or destructors. tile_barrier In amp.h one of the types introduced is tile_barrier. You cannot construct this object yourself (although if you had one, you could use a copy constructor to create another one). So how do you get one of these? You get it, from a tiled_index object. Beyond the 4 properties returning index objects, tiled_index has another property, barrier, that returns a tile_barrier object. The tile_barrier class exposes a single member, the method wait. 15: // Given a tiled_index object named t_idx 16: t_idx.barrier.wait(); 17: // more code …in the code above, all threads in the tile will reach line 16 before a single one progresses to line 17. Note that all threads must be able to reach the barrier, i.e. if you had branchy code in such a way which meant that there is a chance that not all threads could reach line 16, then the code above would be illegal. Tiled Matrix Multiplication Example – part 2 So now that we added to our understanding the concepts of tile_static and tile_barrier, let me obfuscate rewrite the matrix multiplication code so that it takes advantage of tiling. Before you start reading this, I suggest you get a cup of your favorite non-alcoholic beverage to enjoy while you try to fully understand the code. 01: void MatrixMultiplyTiled(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W) 02: { 03: static const int TS = 16; 04: array_view<const float,2> a(M, W, vA); 05: array_view<const float,2> b(W, N, vB); 06: array_view<writeonly<float>,2> c(M,N,vC); 07: parallel_for_each(c.grid.tile< TS, TS >(), 08: [=] (tiled_index< TS, TS> t_idx) restrict(direct3d) 09: { 10: int row = t_idx.local[0]; int col = t_idx.local[1]; 11: float sum = 0.0f; 12: for (int i = 0; i < W; i += TS) { 13: tile_static float locA[TS][TS], locB[TS][TS]; 14: locA[row][col] = a(t_idx.global[0], col + i); 15: locB[row][col] = b(row + i, t_idx.global[1]); 16: t_idx.barrier.wait(); 17: for (int k = 0; k < TS; k++) 18: sum += locA[row][k] * locB[k][col]; 19: t_idx.barrier.wait(); 20: } 21: c[t_idx.global] = sum; 22: }); 23: } Notice that all the code up to line 9 is the same as per the changes we made in part 1 of tiling introduction. If you squint, the body of the lambda itself preserves the original algorithm on lines 10, 11, and 17, 18, and 21. The difference being that those lines use new indexing and the tile_static arrays; the tile_static arrays are declared and initialized on the brand new lines 13-15. On those lines we copy from the global memory represented by the array_view objects (a and b), to the tile_static vanilla arrays (locA and locB) – we are copying enough to fit a tile. Because in the code that follows on line 18 we expect the data for this tile to be in the tile_static storage, we need to synchronize the threads within each tile with a barrier, which we do on line 16 (to avoid accessing uninitialized memory on line 18). We also need to synchronize the threads within a tile on line 19, again to avoid the race between lines 14, 15 (retrieving the next set of data for each tile and overwriting the previous set) and line 18 (not being done processing the previous set of data). Luckily, as part of the awesome C++ AMP debugger in Visual Studio there is an option that helps you find such races, but that is a story for another blog post another time. May I suggest reading the next section, and then coming back to re-read and walk through this code with pen and paper to really grok what is going on, if you haven't already? Cool. Why would I introduce this tiling complexity into my code? Funny you should ask that, I was just about to tell you. There is only one reason we tiled our extent, had to deal with finding a good tile size, ensure the number of threads we schedule are correctly divisible with the tile size, had to use a tiled_index instead of a normal index, and had to understand tile_barrier and to figure out where we need to use it, and double the size of our lambda in terms of lines of code: the reason is to be able to use tile_static memory. Why do we want to use tile_static memory? Because accessing tile_static memory is around 10 times faster than accessing the global memory on an accelerator like the GPU, e.g. in the code above, if you can get 150GB/second accessing data from the array_view a, you can get 1500GB/second accessing the tile_static array locA. And since by definition you are dealing with really large data sets, the savings really pay off. We have seen tiled implementations being twice as fast as their non-tiled counterparts. Now, some algorithms will not have performance benefits from tiling (and in fact may deteriorate), e.g. algorithms that require you to go only once to global memory will not benefit from tiling, since with tiling you already have to fetch the data once from global memory! Other algorithms may benefit, but you may decide that you are happy with your code being 150 times faster than the serial-version you had, and you do not need to invest to make it 250 times faster. Also algorithms with more than 3 dimensions, which C++ AMP supports in the non-tiled model, cannot be tiled. Also note that in future releases, we may invest in making the non-tiled model, which already uses tiling under the covers, go the extra step and use tile_static memory on your behalf, but it is obviously way to early to commit to anything like that, and we certainly don't do any of that today. Comments about this post by Daniel Moth welcome at the original blog.

Read the article

The SSIS tuning tip that everyone misses

- by Rob Farley

I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

Read the article

Setup Guide for updating local system and the repository with the incremental Solaris 11.1 SRU

- by Gurubalan

This guide covers the steps to implement the following setup. I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5II. Setting up local system as an IPS Repository Server (HTTP interface)III. Updating the local repository with the incremental Solaris 11.1 SRU 16.5I. Updating the local system from Solaris 11.1 to Solaris 11.1 SRU 16.5We assume that the local system is currently installed with Solaris 11.1 GA and the system doesn't have internet connectivity.What I have:1. Two parts of full repo iso files downloaded from http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html. Both files are concatenated to a single file using the following command. $ cat sol-11_1-repo-full.iso-a sol-11_1-repo-full.iso-b > sol-11_1-repo-full.iso I suggest to verify the downloaded file against its md5checksum value [http://download.oracle.com/otn/solaris/11_1/md5sum.txt] using the following command digest -a md5 <file-name> // the output of this command should match the original checksum value for that file.2. Incremental repo sol-11_1_16_5_0-incr-repo.iso downloaded from MOS [Patch 18269379: ORACLE SOLARIS 11.1.16.5.0 REPO ISO IMAGE (SPARC/X86 (64-BIT)]. You can get the checksum value of incremental repo iso by clicking the check box "show digest details" when you download the file.3. The local system IP is 192.168.10.10 & port 81 is reserved for repo serverPlease note that this repo file (either full or incremental) is common for both SPARC and X86(64BIT).Steps to update the local system: 1. #mounting s11.1 full repo iso to mnt $ mount -F hsfs /soft/sol-11_1-repo-full.iso /mnt 2. Setting the pkg publisher to full repo source $ pkg set-publisher -g file:///mnt/repo solaris 3. Perform the update of the packages. $ pkg updateII. Setting up local system (Oracle Solaris 11.1) as an IPS Repository Server(HTTP interface):Please note that we have already mounted the full repo iso at /mnt 1. # copying /mnt permanently to the disk location at /s11.1 #zfs create -o atime=off -o mountpoint=/s11.1 rpool/s11.1 #rsync -aP /mnt/* /s11.1 2. #unmounting mnt #umount /mnt3. To allow clients to access the local repository via HTTP, enable the application/pkg/server Service Management Facility (SMF) service. svccfg -s application/pkg/server setprop pkg/inst_root=<data_source>/repo eg: $svccfg -s application/pkg/server setprop pkg/inst_root=/s11.1/repo4. Setting port# to 81 svccfg -s application/pkg/server setprop pkg/port=<port_number> eg: svccfg -s application/pkg/server setprop pkg/port="81"5a. Enable the pkg/server service (if the service is disabled) $svcs pkg/server STATE STIME FMRI disabled 19:55:03 svc:/application/pkg/server:default $svcadm enable pkg/server5b. Refresh/Restart the service, if it is already online $svcadm refresh application/pkg/server $svcadm restart application/pkg/server6. Setting pkg publisher on repo server and repo clients: pkg set-publisher -G '*' -g http://<ip>:<port> solaris eg: $pkg set-publisher -G '*' -g 'http://192.168.10.10:81' solaris7. Verify the Solaris 11.1 version from the repository $pkgrepo list -s http://192.168.10.10:81 | grep entire solaris entire 0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z You will have multiple row entries if the repository is setup with incremental SRUs.III. Updating the local repository with the incremental Solaris 11.1 SRU 16.51. #mounting s11.1 incremental SRU repo iso to mnt $ mount -F hsfs <full_path_to>/sol-11_1_sruN_bldnum_respinnum-incr-repo.iso /mnt $ mount -F hsfs /soft/sol-11_1_16_5_0-incr-repo.iso /mnt2. Updating the local repository $pkgrecv -s /mnt/repo -d /s11.1/repo '*'3. Building a Search Index $pkgrepo -s /s11.1/repo refresh Initiating repository refresh.4. Refresh/Restart the service $svcadm refresh svc:/application/pkg/server $svcadm restart svc:/application/pkg/server5. Verify the repo has the incremental SRU as well. # pkgrepo list -s http://192.168.10.10:81 | grep entire solaris entire 0.5.11,5.11-0.175.1.16.0.5.0:20140218T165248Z solaris entire 0.5.11,5.11-0.175.1.0.0.24.2:20120919T190135Z

Read the article

SQL University: What and why of database refactoring

- by Mladen Prajdic

This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Tools of the trade This is a second part of the series and in it we’ll take a look at what database refactoring is and why do it. Why refactor a database To know why refactor we first have to know what refactoring actually is. Code refactoring is a process where we change module internals in a way that does not change that module’s input/output behavior. For successful refactoring there is one crucial thing we absolutely must have: Tests. Automated unit tests are the only guarantee we have that we haven’t broken the input/output behavior before refactoring. If you haven’t go back ad read my post on the matter. Then start writing them. Next thing you need is a code module. Those are views, UDFs and stored procedures. By having direct table access we can kiss fast and sweet refactoring good bye. One more point to have a database abstraction layer. And no, ORM’s don’t fall into that category. But also know that refactoring is NOT adding new functionality to your code. Many have fallen into this trap. Don’t be one of them and resist the lure of the dark side. And it’s a strong lure. We developers in general love to add new stuff to our code, but hate fixing our own mistakes or changing existing code for no apparent reason. To be a good refactorer one needs discipline and focus. Now we know that refactoring is all about changing inner workings of existing code. This can be due to performance optimizations, changing internal code workflows or some other reason. This is a typical black box scenario to the outside world. If we upgrade the car engine it still has to drive on the road (preferably faster) and not fly (no matter how cool that would be). Also be aware that white box tests will break when we refactor. What to refactor in a database Refactoring databases doesn’t happen that often but when it does it can include a lot of stuff. Let us look at a few common cases. Adding or removing database schema objects Adding, removing or changing table columns in any way, adding constraints, keys, etc… All of these can be counted as internal changes not visible to the data consumer. But each of these carries a potential input/output behavior change. Dropping a column can result in views not working anymore or stored procedure logic crashing. Adding a unique constraint shows duplicated data that shouldn’t exist. Foreign keys break a truncate table command executed from an application that runs once a month. All these scenarios are very real and can happen. With the proper database abstraction layer fully covered with black box tests we can make sure something like that does not happen (hopefully at all). Changing physical structures Physical structures include heaps, indexes and partitions. We can pretty much add or remove those without changing the data returned by the database. But the performance can be affected. So here we use our performance tests. We do have them, right? Just by adding a single index we can achieve orders of magnitude performance improvement. Won’t that make users happy? But what if that index causes our write operations to crawl to a stop. again we have to test this. There are a lot of things to think about and have tests for. Without tests we can’t do successful refactoring! Fixing bad code We all have some bad code in our systems. We usually refer to that code as code smell as they violate good coding practices. Examples of such code smells are SQL injection, use of SELECT *, scalar UDFs or cursors, etc… Each of those is huge code smell and can result in major code changes. Take SELECT * from example. If we remove a column from a table the client using that SELECT * statement won’t have a clue about that until it runs. Then it will gracefully crash and burn. Not to mention the widely unknown SELECT * view refresh problem that Tomas LaRock (@SQLRockstar on Twitter) and Colin Stasiuk (@BenchmarkIT on Twitter) talk about in detail. Go read about it, it’s informative. Refactoring this includes replacing the * with column names and most likely change to application using the database. Breaking apart huge stored procedures Have you ever seen seen a stored procedure that was 2000 lines long? I have. It’s not pretty. It hurts the eyes and sucks the will to live the next 10 minutes. They are a maintenance nightmare and turn into things no one dares to touch. I’m willing to bet that 100% of time they don’t have a single test on them. Large stored procedures (and functions) are a clear sign that they contain business logic. General opinion on good database coding practices says that business logic has no business in the database. That’s the applications part. Refactoring such behemoths requires writing lots of edge case tests for the stored procedure input/output behavior and then start to refactor it. First we split the logic inside into smaller parts like new stored procedures and UDFs. Those then get called from the master stored procedure. Once we’ve successfully modularized the database code it’s best to transfer that logic into the applications consuming it. This only leaves the stored procedure with common data manipulation logic. Of course this isn’t always possible so having a plethora of performance and behavior unit tests is absolutely necessary to confirm we’ve actually improved the codebase in some way. Refactoring is not a popular chore amongst developers or managers. The former don’t like fixing old code, the latter can’t see the financial benefit. Remember how we talked about being lousy at estimating future costs in the previous post? But there comes a time when it must be done. Hopefully I’ve given you some ideas how to get started. In the last post of the series we’ll take a look at the tools to use and an example of testing and refactoring.

Read the article

JQuery Mobile Code Snippets 1

- by Yousef_Jadallah

I want to share with you some important codes that you may need during JQuery Mobile development.These codes are tested on Alpha 4 version. Beta 1 has been released before two days, Therefore I will test them in my current project and let you know if there is any changes : Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Show and hide back button in your Application $(document).bind("mobileinit", function () { $.mobile.page.prototype.options.addBackBtn = true; }); Customizing the back button text $(document).bind("mobileinit", function () {$.mobile.page.prototype.options.backBtnText = "previous";}); Hide "Close button" for dialog programatically: $('[data-role=dialog]div[id="YourDiaogdivID"]').live('pagecreate', function (event) { $("a[data-icon='delete']").hide(); }); Change Select option element index: var myselect = $("select#foo"); myselect[0].selectedIndex = 0; //The new index myselect.selectmenu("refresh"); //uset this line of code after any updating on the select element Change Select optoin elemetn text value: $("select#foo").parent().contents().children('.ui-btn-text').text('Your Text Here'); Refreshing a checkbox $("select#foo").parent().contents().children('.ui-btn-text').text('Your Text Here'); Hide select option element $('#foo').parent().hide(); Hide and Show Page Loading Message : $.mobile.pageLoading(); //Show $.mobile.pageLoading(true); //hide overriding $.mobile.loadingMessage $(document).bind("mobileinit", function () { $.mobile.loadingMessage = 'My Loading Message'; }); Hide and Show jQuery-Mobile-Themed-DatePicker $(".ui-datepicker").hide(); $(".ui-datepicker").show(); Build your Custom Loading Message : $('#CustomeLoadingMessage').hide();//Hide the div $('# CustomeLoadingMessage').ajaxStart(function () { $(this).show(); }); $('# CustomeLoadingMessage').ajaxStop(function () { $(this).hide(); }); I wil publish other important codes soon.Hope that helps.

Read the article

UV Atlas Generation and Seam Removal

- by P. Avery

I'm generating light maps for scene mesh objects using DirectX's UV Atlas Tool( D3DXUVAtlasCreate() ). I've succeeded in generating an atlas, however, when I try to render the mesh object using the atlas the seams are visible on the mesh. Below are images of a lightmap generated for a cube. Here is the code I use to generate a uv atlas for a cube: struct sVertexPosNormTex { D3DXVECTOR3 vPos, vNorm; D3DXVECTOR2 vUV; sVertexPosNormTex(){} sVertexPosNormTex( D3DXVECTOR3 v, D3DXVECTOR3 n, D3DXVECTOR2 uv ) { vPos = v; vNorm = n; vUV = uv; } ~sVertexPosNormTex() { } }; // create a light map texture to fill programatically hr = D3DXCreateTexture( pd3dDevice, 128, 128, 1, 0, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, &pLightmap ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to D3DXCreateTexture( lightmap )", __LINE__, hr ); return hr; } // get the zero level surface from the texture IDirect3DSurface9 *pS = NULL; pLightmap->GetSurfaceLevel( 0, &pS ); // clear surface pd3dDevice->ColorFill( pS, NULL, D3DCOLOR_XRGB( 0, 0, 0 ) ); // load a sample mesh DWORD dwcMaterials = 0; LPD3DXBUFFER pMaterialBuffer = NULL; V_RETURN( D3DXLoadMeshFromX( L"cube3.x", D3DXMESH_MANAGED, pd3dDevice, &pAdjacency, &pMaterialBuffer, NULL, &dwcMaterials, &g_pMesh ) ); // generate adjacency DWORD *pdwAdjacency = new DWORD[ 3 * g_pMesh->GetNumFaces() ]; g_pMesh->GenerateAdjacency( 1e-6f, pdwAdjacency ); // create light map coordinates LPD3DXMESH pMesh = NULL; LPD3DXBUFFER pFacePartitioning = NULL, pVertexRemapArray = NULL; FLOAT resultStretch = 0; UINT numCharts = 0; hr = D3DXUVAtlasCreate( g_pMesh, 0, 0, 128, 128, 3.5f, 0, pdwAdjacency, NULL, NULL, NULL, NULL, NULL, 0, &pMesh, &pFacePartitioning, &pVertexRemapArray, &resultStretch, &numCharts ); if( SUCCEEDED( hr ) ) { // release and set mesh SAFE_RELEASE( g_pMesh ); g_pMesh = pMesh; // write mesh to file hr = D3DXSaveMeshToX( L"cube4.x", g_pMesh, 0, ( const D3DXMATERIAL* )pMaterialBuffer->GetBufferPointer(), NULL, dwcMaterials, D3DXF_FILEFORMAT_TEXT ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to D3DXSaveMeshToX() at OnD3D9CreateDevice()", __LINE__, hr ); } // fill the the light map hr = BuildLightmap( pS, g_pMesh ); if( FAILED( hr ) ) { DebugStringDX( "Main", "Failed to BuildLightmap()", __LINE__, hr ); } } else { DebugStringDX( "Main", "Failed to D3DXUVAtlasCreate() at OnD3D9CreateDevice()", __LINE__, hr ); } SAFE_RELEASE( pS ); SAFE_DELETE_ARRAY( pdwAdjacency ); SAFE_RELEASE( pFacePartitioning ); SAFE_RELEASE( pVertexRemapArray ); SAFE_RELEASE( pMaterialBuffer ); Here is code to fill lightmap texture: HRESULT BuildLightmap( IDirect3DSurface9 *pS, LPD3DXMESH pMesh ) { HRESULT hr = S_OK; // validate lightmap texture surface and mesh if( !pS || !pMesh ) return E_POINTER; // lock the mesh vertex buffer sVertexPosNormTex *pV = NULL; pMesh->LockVertexBuffer( D3DLOCK_READONLY, ( void** )&pV ); // lock the mesh index buffer WORD *pI = NULL; pMesh->LockIndexBuffer( D3DLOCK_READONLY, ( void** )&pI ); // get the lightmap texture surface description D3DSURFACE_DESC desc; pS->GetDesc( &desc ); // lock the surface rect to fill with color data D3DLOCKED_RECT rct; hr = pS->LockRect( &rct, NULL, 0 ); if( FAILED( hr ) ) { DebugStringDX( "main.cpp:", "Failed to IDirect3DTexture9::LockRect()", __LINE__, hr ); return hr; } // iterate the pixels of the lightmap texture // check each pixel to see if it lies between the uv coordinates of a cube face BYTE *pBuffer = ( BYTE* )rct.pBits; for( UINT y = 0; y < desc.Height; ++y ) { BYTE* pBufferRow = ( BYTE* )pBuffer; for( UINT x = 0; x < desc.Width * 4; x+=4 ) { // determine the pixel's uv coordinate D3DXVECTOR2 p( ( ( float )x / 4.0f ) / ( float )desc.Width + 0.5f / 128.0f, y / ( float )desc.Height + 0.5f / 128.0f ); // for each face of the mesh // check to see if the pixel lies within the face's uv coordinates for( UINT i = 0; i < 3 * pMesh->GetNumFaces(); i +=3 ) { sVertexPosNormTex v[ 3 ]; v[ 0 ] = pV[ pI[ i + 0 ] ]; v[ 1 ] = pV[ pI[ i + 1 ] ]; v[ 2 ] = pV[ pI[ i + 2 ] ]; if( TexcoordIsWithinBounds( v[ 0 ].vUV, v[ 1 ].vUV, v[ 2 ].vUV, p ) ) { // the pixel lies b/t the uv coordinates of a cube face // light contribution functions aren't needed yet //D3DXVECTOR3 vPos = TexcoordToPos( v[ 0 ].vPos, v[ 1 ].vPos, v[ 2 ].vPos, v[ 0 ].vUV, v[ 1 ].vUV, v[ 2 ].vUV, p ); //D3DXVECTOR3 vNormal = v[ 0 ].vNorm; // set the color of this pixel red( for demo ) BYTE ba[] = { 0, 0, 255, 255, }; //ComputeContribution( vPos, vNormal, g_sLight, ba ); // copy the byte array into the light map texture memcpy( ( void* )&pBufferRow[ x ], ( void* )ba, 4 * sizeof( BYTE ) ); } } } // go to next line of the texture pBuffer += rct.Pitch; } // unlock the surface rect pS->UnlockRect(); // unlock mesh vertex and index buffers pMesh->UnlockIndexBuffer(); pMesh->UnlockVertexBuffer(); // write the surface to file hr = D3DXSaveSurfaceToFile( L"LightMap.jpg", D3DXIFF_JPG, pS, NULL, NULL ); if( FAILED( hr ) ) DebugStringDX( "Main.cpp", "Failed to D3DXSaveSurfaceToFile()", __LINE__, hr ); return hr; } bool TexcoordIsWithinBounds( const D3DXVECTOR2 &t0, const D3DXVECTOR2 &t1, const D3DXVECTOR2 &t2, const D3DXVECTOR2 &p ) { // compute vectors D3DXVECTOR2 v0 = t1 - t0, v1 = t2 - t0, v2 = p - t0; float f00 = D3DXVec2Dot( &v0, &v0 ); float f01 = D3DXVec2Dot( &v0, &v1 ); float f02 = D3DXVec2Dot( &v0, &v2 ); float f11 = D3DXVec2Dot( &v1, &v1 ); float f12 = D3DXVec2Dot( &v1, &v2 ); // Compute barycentric coordinates float invDenom = 1 / ( f00 * f11 - f01 * f01 ); float fU = ( f11 * f02 - f01 * f12 ) * invDenom; float fV = ( f00 * f12 - f01 * f02 ) * invDenom; // Check if point is in triangle if( ( fU >= 0 ) && ( fV >= 0 ) && ( fU + fV < 1 ) ) return true; return false; } Screenshot Lightmap I believe the problem comes from the difference between the lightmap uv coordinates and the pixel center coordinates...for example, here are the lightmap uv coordinates( generated by D3DXUVAtlasCreate() ) for a specific face( tri ) within the mesh, keep in mind that I'm using the mesh uv coordinates to write the pixels for the texture: v[ 0 ].uv = D3DXVECTOR2( 0.003581, 0.295631 ); v[ 1 ].uv = D3DXVECTOR2( 0.003581, 0.003581 ); v[ 2 ].uv = D3DXVECTOR2( 0.295631, 0.003581 ); the lightmap texture size is 128 x 128 pixels. The upper-left pixel center coordinates are: float halfPixel = 0.5 / 128 = 0.00390625; D3DXVECTOR2 pixelCenter = D3DXVECTOR2( halfPixel, halfPixel ); will the mapping and sampling of the lightmap texture will require that an offset be taken into account or that the uv coordinates are snapped to the pixel centers..? ...Any ideas on the best way to approach this situation would be appreciated...What are the common practices?

Read the article

How to block the ASP.NET page while ajax UpdateProgress is being displayed.

Step 1: Copy the following styles to your aspx page. <style type="text/css"> .hide { display: none; } .show { display: inherit; } .progressBackgroundFilter { position: absolute; top: 0px; bottom: 0px; left: 0px; right: 0px; overflow: hidden; padding: 0; margin: 0; background-color: #000; filter: alpha(opacity=50); opacity: 0.5; z-index: 1000; } .processMessage { position: absolute; font-family:Verdana; font-size:12px; font-weight:normal; color:#000066; top: 30%; left: 43%; padding: 10px; width: 18%; z-index: 1001; background-color: #fff; } </style> Step 2: Put the divs as shown below in UpdateProgress control. <asp:UpdateProgress ID="updPrgsBaselineTab" runat="server"> <ProgressTemplate> <div id="progressBackgroundFilter" class="progressBackgroundFilter"> </div> <div id="processMessage" class="processMessage"> <table width="100%"> <tr style="width: 100%"> <td style="width: 100%"> Please Wait.......... </td> </tr> <tr style="width: 100%"> <td style="width: 100%" align="center"> <img src="../Images/Update_Progress.gif" /> </td> </tr> </table> </div> </ProgressTemplate> </asp:UpdateProgress> span.fullpost {display:none;}

Read the article

IE issues with my Website (Help me fix my CSS)

- by cam77

I'm struggling geting my website to test fully positive in IE, the following problems keep arising, only in IE; My '#grey box' div displaying 200px to the left out of place, and it seems to move with the adjustment of the IE window size, does this in no other browsers, just IE. It creates this unnecessary horizontal scroll. I have the width set to pretty large, but have "overflow: hidden" and again, works fine across except for IE. On a few of my pages, the footer is somewhat cropped and out of place. My biggest concern is the particular page's CSS, pasted below. #container { width : 1265px; height : 920px; background-color : #addceb; overflow : hidden; padding : 0; } #logo { font-size : 38px; height : 167px; width : 427px; margin-left : 435px; padding-top : 20px; margin-bottom : -10px; margin-top: 10px; border : none; } #menunav { width : 100%; background-image : url(../imagesnew/menunav.png); background-repeat : repeat-x; height : 40px; text-align : center; font-size : 14px; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; overflow : auto; } #menunav ul { list-style-type : none; background-image : url(); height : 40px; width : 800px; margin : auto; } #menunav ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } #mainbox { position : relative; background-image : url(../premiumslideimgs/premiumbox.png); background-repeat : no-repeat; width : 900px; height : 800px; margin-left : 16%; top : 22px; padding-top : 5px; overflow : hidden; } #simplegallery1 { position : absolute; left : 50%; width : 800px; height : 800px; margin-top : 44px; margin-bottom: -44px; margin-bottom : 240px; margin-left : -397px; background-color : #a1bbfe; padding-top : 0; } #textbelowbox { position : absolute; width : 830px; height : 45px; margin-left : 209px; margin-bottom : 240px; margin-top : -240px; overflow : hidden; } #footer { background-image : url(../imagesnew/footerimg.png); background-repeat : no-repeat; background-position : right; height : 275px; margin-top : -285px; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; background-color : #addceb; margin : 0; padding : 0; } #textabovebox { width : 920px; position : absolute; margin-left : 228px; margin-bottom : 80px; margin-top : 38px; z-index : 2000; font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; } a.submenu:hover { color : #333; font-weight : bolder; } #dialog { font-size : 12px; } #greybox { position : absolute; width : 275px; height : 465px; margin-left : 715px; margin-top : 80px; overflow : hidden; z-index : 2000; } ul { background-image : url(); height : 40px; width : 800px; margin : auto; } ul a { background-image : url(); background-repeat : no-repeat; background-position : right; padding-right : 32px; padding-left : 15px; display : block; line-height : 30px; text-decoration : none; font-size : 14px; } li { float : left; } a:link { color : #ffffff; text-decoration : none; } a:visited { color : #ffffff; text-decoration : none; } a:active { color : #ffffff; text-decoration : none; } a:hover { color : #addceb; } #right { float : right; margin-top : 3px; } #left { float : left; margin-left : 30px; } #text { float : left; margin-left : 30px; } body { font-family : Palatino Linotype, Book Antiqua, Palatino, FreeSerif, serif; padding : 0; margin : 0; } body { background-color : #addceb; } a.submenu:link { color : #333333; } a.submenu:active { color : #333333; } a.submenu:visited { color : #333333; } a.submenu:hover { color : #333333; font-weight : bolder; } { margin: 0; padding: 0; } Please help if you can, thanks a lot.

Read the article

JBoss AS 5: starts but can't connect (Windows, remote)

- by Nuwan

Hello I installed Jboss 5.0GA and Its works fine in localhost.But I want It to access through remote Machine.Then I bind my IP address to my server and started it.This is the command I used run.bat -b 10.17.62.63 Then the server Starts fine This is the console log when starting the server > =============================================================================== > > JBoss Bootstrap Environment > > JBOSS_HOME: C:\jboss-5.0.0.GA > > JAVA: C:\Program Files\Java\jdk1.6.0_34\bin\java > > JAVA_OPTS: -Dprogram.name=run.bat -server -Xms128m -Xmx512m > -XX:MaxPermSize=25 6m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Ds un.rmi.dgc.server.gcInterval=3600000 > > CLASSPATH: C:\jboss-5.0.0.GA\bin\run.jar > > =============================================================================== > > run.bat: unused non-option argument: ûb run.bat: unused non-option > argument: 0.0.0.0 13:43:38,179 INFO [ServerImpl] Starting JBoss > (Microcontainer)... 13:43:38,179 INFO [ServerImpl] Release ID: JBoss > [Morpheus] 5.0.0.GA (build: SV NTag=JBoss_5_0_0_GA date=200812041714) > 13:43:38,179 INFO [ServerImpl] Bootstrap URL: null 13:43:38,179 INFO > [ServerImpl] Home Dir: C:\jboss-5.0.0.GA 13:43:38,179 INFO > [ServerImpl] Home URL: file:/C:/jboss-5.0.0.GA/ 13:43:38,195 INFO > [ServerImpl] Library URL: file:/C:/jboss-5.0.0.GA/lib/ 13:43:38,195 > INFO [ServerImpl] Patch URL: null 13:43:38,195 INFO [ServerImpl] > Common Base URL: file:/C:/jboss-5.0.0.GA/common/ > > 13:43:38,195 INFO [ServerImpl] Common Library URL: > file:/C:/jboss-5.0.0.GA/comm on/lib/ 13:43:38,195 INFO [ServerImpl] > Server Name: default 13:43:38,195 INFO [ServerImpl] Server Base Dir: > C:\jboss-5.0.0.GA\server 13:43:38,195 INFO [ServerImpl] Server Base > URL: file:/C:/jboss-5.0.0.GA/server/ > > 13:43:38,210 INFO [ServerImpl] Server Config URL: > file:/C:/jboss-5.0.0.GA/serve r/default/conf/ 13:43:38,210 INFO > [ServerImpl] Server Home Dir: C:\jboss-5.0.0.GA\server\defaul t > 13:43:38,210 INFO [ServerImpl] Server Home URL: > file:/C:/jboss-5.0.0.GA/server/ default/ 13:43:38,210 INFO > [ServerImpl] Server Data Dir: C:\jboss-5.0.0.GA\server\defaul t\data > 13:43:38,210 INFO [ServerImpl] Server Library URL: > file:/C:/jboss-5.0.0.GA/serv er/default/lib/ 13:43:38,210 INFO > [ServerImpl] Server Log Dir: C:\jboss-5.0.0.GA\server\default \log > 13:43:38,210 INFO [ServerImpl] Server Native Dir: > C:\jboss-5.0.0.GA\server\defa ult\tmp\native 13:43:38,210 INFO > [ServerImpl] Server Temp Dir: C:\jboss-5.0.0.GA\server\defaul t\tmp > 13:43:38,210 INFO [ServerImpl] Server Temp Deploy Dir: > C:\jboss-5.0.0.GA\server \default\tmp\deploy 13:43:39,710 INFO > [ServerImpl] Starting Microcontainer, bootstrapURL=file:/C:/j > boss-5.0.0.GA/server/default/conf/bootstrap.xml 13:43:40,851 INFO > [VFSCacheFactory] Initializing VFSCache [org.jboss.virtual.pl > ugins.cache.IterableTimedVFSCache] 13:43:40,866 INFO > [VFSCacheFactory] Using VFSCache [IterableTimedVFSCache{lifet > ime=1800, resolution=60}] 13:43:41,616 INFO [CopyMechanism] VFS temp > dir: C:\jboss-5.0.0.GA\server\defaul t\tmp 13:43:41,648 INFO > [ZipEntryContext] VFS force nested jars copy-mode is enabled. > > 13:43:44,288 INFO [ServerInfo] Java version: 1.6.0_34,Sun > Microsystems Inc. 13:43:44,288 INFO [ServerInfo] Java VM: Java > HotSpot(TM) Server VM 20.9-b04,Sun Microsystems Inc. 13:43:44,288 > INFO [ServerInfo] OS-System: Windows XP 5.1,x86 13:43:44,569 INFO > [JMXKernel] Legacy JMX core initialized 13:43:50,148 INFO > [ProfileServiceImpl] Loading profile: default from: org.jboss > .system.server.profileservice.repository.SerializableDeploymentRepository@e72f0c > (root=C:\jboss-5.0.0.GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b > 82c3[domain=default,server=default,name=default]) 13:43:50,148 INFO > [ProfileImpl] Using repository:org.jboss.system.server.profil > eservice.repository.SerializableDeploymentRepository@e72f0c(root=C:\jboss-5.0.0. > GA\server, > key=org.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,s > erver=default,name=default]) 13:43:50,148 INFO [ProfileServiceImpl] > Loaded profile: ProfileImpl@8b3bb3{key=o > rg.jboss.profileservice.spi.ProfileKey@143b82c3[domain=default,server=default,na > me=default]} 13:43:54,804 INFO [WebService] Using RMI server > codebase: http://127.0.0.1:8083 / 13:44:12,147 INFO [CXFServerConfig] > JBoss Web Services - Stack CXF Runtime Serv er 13:44:12,147 INFO > [CXFServerConfig] 3.1.2.GA 13:44:29,788 INFO > [Ejb3DependenciesDeployer] Encountered deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:29,819 INFO [Ejb3DependenciesDeployer] Encountered > deployment AbstractVFS > DeploymentContext@29776073{vfszip:/C:/jboss-5.0.0.GA/server/default/deploy/myE-e > jb.jar} 13:44:37,116 INFO [JMXConnectorServerService] JMX Connector > server: service:jmx > :rmi://127.0.0.1/jndi/rmi://127.0.0.1:1090/jmxconnector 13:44:38,022 > INFO [MailService] Mail Service bound to java:/Mail 13:44:43,162 WARN > [JBossASSecurityMetadataStore] WARNING! POTENTIAL SECURITY RI SK. It > has been detected that the MessageSucker component which sucks > messages f rom one node to another has not had its password changed > from the installation d efault. Please see the JBoss Messaging user > guide for instructions on how to do this. 13:44:43,209 WARN > [AnnotationCreator] No ClassLoader provided, using TCCL: org. > jboss.managed.api.annotation.ManagementComponent 13:44:43,600 INFO > [TransactionManagerService] JBossTS Transaction Service (JTA version) > - JBoss Inc. 13:44:43,600 INFO [TransactionManagerService] Setting up property manager MBean and JMX layer 13:44:44,366 INFO > [TransactionManagerService] Initializing recovery manager 13:44:44,678 > INFO [TransactionManagerService] Recovery manager configured > 13:44:44,678 INFO [TransactionManagerService] Binding > TransactionManager JNDI R eference 13:44:44,787 INFO > [TransactionManagerService] Starting transaction recovery man ager > 13:44:46,428 INFO [Http11Protocol] Initializing Coyote HTTP/1.1 on > http-127.0.0 .1-8080 13:44:46,459 INFO [AjpProtocol] Initializing > Coyote AJP/1.3 on ajp-127.0.0.1-80 09 13:44:46,459 INFO > [StandardService] Starting service jboss.web 13:44:46,475 INFO > [StandardEngine] Starting Servlet Engine: JBoss Web/2.1.1.GA > 13:44:46,616 INFO [Catalina] Server startup in 350 ms 13:44:46,709 > INFO [TomcatDeployment] deploy, ctxPath=/web-console, vfsUrl=manag > ement/console-mgr.sar/web-console.war 13:44:48,553 INFO > [TomcatDeployment] deploy, ctxPath=/juddi, vfsUrl=juddi-servi > ce.sar/juddi.war 13:44:48,678 INFO [RegistryServlet] Loading jUDDI > configuration. 13:44:48,694 INFO [RegistryServlet] Resources loaded > from: /WEB-INF/juddi.prope rties 13:44:48,709 INFO [RegistryServlet] > Initializing jUDDI components. 13:44:48,991 INFO [TomcatDeployment] > deploy, ctxPath=/invoker, vfsUrl=http-invo ker.sar/invoker.war > 13:44:49,162 INFO [TomcatDeployment] deploy, ctxPath=/jbossws, > vfsUrl=jbossws.s ar/jbossws-management.war 13:44:49,475 INFO > [RARDeployment] Required license terms exist, view vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-local-jdbc.rar/META-INF/ra.xml > 13:44:49,569 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jboss-xa-jdbc.rar/META-INF/ra.xml > 13:44:49,741 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/jms-ra.rar/META-INF/ra.xml > 13:44:49,819 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/mail-ra.rar/META-INF/ra.xml > 13:44:49,912 INFO [RARDeployment] Required license terms exist, view > vfszip:/C: > /jboss-5.0.0.GA/server/default/deploy/quartz-ra.rar/META-INF/ra.xml > 13:44:50,069 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:50,115 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:50,131 INFO [RAMJobStore] > RAMJobStore initialized. 13:44:50,131 INFO [StdSchedulerFactory] > Quartz scheduler 'DefaultQuartzSchedule r' initialized from default > resource file in Quartz package: 'quartz.properties' > > 13:44:50,131 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:50,131 INFO [QuartzScheduler] Scheduler DefaultQuartzScheduler_$_NON_CLUS TERED started. 13:44:51,194 INFO > [ConnectionFactoryBindingService] Bound ConnectionManager 'jb > oss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name > 'java:DefaultDS' 13:44:51,819 WARN [QuartzTimerServiceFactory] sql > failed: CREATE TABLE QRTZ_JOB > _DETAILS(JOB_NAME VARCHAR(80) NOT NULL, JOB_GROUP VARCHAR(80) NOT NULL, DESCRIPT ION VARCHAR(120) NULL, JOB_CLASS_NAME VARCHAR(128) NOT > NULL, IS_DURABLE VARCHAR( 1) NOT NULL, IS_VOLATILE VARCHAR(1) NOT > NULL, IS_STATEFUL VARCHAR(1) NOT NULL, R EQUESTS_RECOVERY VARCHAR(1) > NOT NULL, JOB_DATA BINARY NULL, PRIMARY KEY (JOB_NAM E,JOB_GROUP)) > 13:44:51,912 INFO [SimpleThreadPool] Job execution threads will use > class loade r of thread: main 13:44:51,928 INFO [QuartzScheduler] > Quartz Scheduler v.1.5.2 created. 13:44:51,928 INFO [JobStoreCMT] > Using db table-based data access locking (synch ronization). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Trigger(s). > 13:44:51,944 INFO [JobStoreCMT] Removed 0 Volatile Job(s). > 13:44:51,944 INFO [JobStoreCMT] JobStoreCMT initialized. 13:44:51,944 > INFO [StdSchedulerFactory] Quartz scheduler 'JBossEJB3QuartzSchedu > ler' initialized from an externally provided properties instance. > 13:44:51,959 INFO [StdSchedulerFactory] Quartz scheduler version: > 1.5.2 13:44:51,959 INFO [JobStoreCMT] Freed 0 triggers from 'acquired' / 'blocked' st ate. 13:44:51,975 INFO [JobStoreCMT] > Recovering 0 jobs that were in-progress at the time of the last > shut-down. 13:44:51,975 INFO [JobStoreCMT] Recovery complete. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 'complete' triggers. > 13:44:51,975 INFO [JobStoreCMT] Removed 0 stale fired job entries. > 13:44:51,990 INFO [QuartzScheduler] Scheduler > JBossEJB3QuartzScheduler_$_NON_CL USTERED started. 13:44:52,381 INFO > [ServerPeer] JBoss Messaging 1.4.1.GA server [0] started 13:44:52,569 > INFO [QueueService] Queue[/queue/DLQ] started, fullSize=200000, pa > geSize=2000, downCacheSize=2000 13:44:52,584 INFO [QueueService] > Queue[/queue/ExpiryQueue] started, fullSize=20 0000, pageSize=2000, > downCacheSize=2000 13:44:52,709 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,709 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1a8ac5e > started 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsFailover attribute is t rue on connection factory: > jboss.messaging.connectionfactory:service=ClusteredCo nnectionFactory > but post office is non clustered. So connection factory will *no t* > support failover 13:44:52,725 WARN [ConnectionFactoryJNDIMapper] > supportsLoadBalancing attribute is true on connection factory: > jboss.messaging.connectionfactory:service=Cluste redConnectionFactory > but post office is non clustered. So connection factory wil l *not* > support load balancing 13:44:52,740 INFO [ConnectionFactory] > Connector bisocket://127.0.0.1:4457 has l easing enabled, lease period > 10000 milliseconds 13:44:52,740 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@1d43178 > started 13:44:52,740 INFO [ConnectionFactory] Connector > bisocket://127.0.0.1:4457 has l easing enabled, lease period 10000 > milliseconds 13:44:52,756 INFO [ConnectionFactory] > org.jboss.jms.server.connectionfactory.Co nnectionFactory@52728a > started 13:44:53,084 INFO [ConnectionFactoryBindingService] Bound > ConnectionManager 'jb > oss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name > 'java:JmsXA' 13:44:53,225 INFO [TomcatDeployment] deploy, ctxPath=/, > vfsUrl=ROOT.war 13:44:53,553 INFO [TomcatDeployment] deploy, > ctxPath=/jmx-console, vfsUrl=jmx-c onsole.war 13:44:53,975 INFO > [TomcatDeployment] deploy, ctxPath=/TestService, vfsUrl=TestS > erviceEAR.ear/TestService.war 13:44:55,662 INFO [JBossASKernel] > Created KernelDeployment for: myE-ejb.jar 13:44:55,709 INFO > [JBossASKernel] installing bean: jboss.j2ee:jar=myE-ejb.jar,n > ame=RPSService,service=EJB3 13:44:55,725 INFO [JBossASKernel] with > dependencies: 13:44:55,725 INFO [JBossASKernel] and demands: > 13:44:55,725 INFO [JBossASKernel] > jboss.ejb:service=EJBTimerService 13:44:55,725 INFO [JBossASKernel] > and supplies: 13:44:55,725 INFO [JBossASKernel] > jndi:RPSService/remote 13:44:55,725 INFO [JBossASKernel] Added > bean(jboss.j2ee:jar=myE-ejb.jar,name=RP SService,service=EJB3) to > KernelDeployment of: myE-ejb.jar 13:44:56,772 INFO > [SessionSpecContainer] Starting jboss.j2ee:jar=myE-ejb.jar,na > me=RPSService,service=EJB3 13:44:56,803 INFO [EJBContainer] STARTED > EJB: com.monz.rpz.RPSService ejbName: RPSService 13:44:56,819 INFO > [JndiSessionRegistrarBase] Binding the following Entries in G lobal > JNDI: > > > 13:44:57,381 INFO [DefaultEndpointRegistry] register: > jboss.ws:context=myE-ejb, endpoint=RPSService 13:44:57,428 INFO > [DescriptorDeploymentAspect] Add Service id=RPSService > address=http://127.0.0.1:8080/myE-ejb/RPSService > implementor=com.monz.rpz.RPSService > invoker=org.jboss.wsf.stack.cxf.InvokerEJB3 mtomEnabled=false > 13:44:57,459 INFO [DescriptorDeploymentAspect] JBossWS-CXF > configuration genera ted: > file:/C:/jboss-5.0.0.GA/server/default/tmp/jbossws/jbossws-cxf1864137209199 > 110130.xml 13:44:57,569 INFO [TomcatDeployment] deploy, ctxPath=/myE-ejb, vfsUrl=myE-ejb.j ar 13:44:57,709 WARN [config] > Unable to process deployment descriptor for context '/myE-ejb' > 13:44:59,334 INFO [Http11Protocol] Starting Coyote HTTP/1.1 on > http-127.0.0.1-8 080 13:44:59,397 INFO [AjpProtocol] Starting Coyote > AJP/1.3 on ajp-127.0.0.1-8009 13:44:59,459 INFO [ServerImpl] JBoss > (Microcontainer) [5.0.0.GA (build: SVNTag= JBoss_5_0_0_GA > date=200812041714)] Started in 1m:21s:233ms But Still I cant connect to It when I Type my IP address in my browser thanks

Read the article

Benchmarking hosting providers IO with Bonnie

- by Derek Organ

Ok, because of a bunch of projects I'm working on I've access to dedicated Servers on a 3 hosting providers. As an experiment and for educational purposes I decided to see if I could benchmark how good the IO is with each. Bit of research lead me to Bonnie++ So I installed it on the server and ran this simple command /usr/sbin/bonnie -d /tmp/foo The 3 machines in different hosting providers are all dedicated machines, one is a VPS, other two are on some cloud platform e.g. VMWare / Xen using some kind of clustered SAN for storage This might be a naive thing to do but here are the results I found. HOST A Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxxxxx 1G 45081 88 56244 14 19167 4 20965 40 67110 6 67.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 15264 28 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ xxxxxxxx,1G,45081,88,56244,14,19167,4,20965,40,67110,6,67.2,0,16,15264,28,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++ HOST B Version 1.03d ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxx 4G 43070 91 64510 15 19092 0 29276 47 39169 0 448.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 24799 52 +++++ +++ +++++ +++ 25443 54 +++++ +++ +++++ +++ xxxxxxx,4G,43070,91,64510,15,19092,0,29276,47,39169,0,448.2,0,16,24799,52,+++++,+++,+++++,+++,25443,54,+++++,+++,+++++,+++ HOST C Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxx 1536M 15598 22 85698 13 258969 20 16194 22 723655 21 +++++ +++ ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 14142 22 +++++ +++ 18621 22 13544 22 +++++ +++ 17363 21 xxxxxxxx,1536M,15598,22,85698,13,258969,20,16194,22,723655,21,+++++,+++,16,14142,22,+++++,+++,18621,22,13544,22,+++++,+++,17363,21 Ok, so first off what is the best way to read the figures and are there any issues with really comparing these numbers? Is this in any way a true representation of IO Speed? If not is there any way for me to test that? Note: these 3 machines are using either Ubuntu or Debian (I presume that doesn't really matter)

Read the article

SQL server 2008 R2 installation error

- by Sonia

I have a windows 7,32 bit laptop. I am the administrator with all permissions. when I click on the SQL server 2008R2 set up file,it says : "SQL server set up has encountered the following error:Failed to retreive data for this request" click on OK. I have uninstalled all the components of SQL from control panel. I used Windows installer clean up to remove the files(which I must have not done ),but still no go. The summary.txt log says: Overall summary: Final result: Failed: see details below Exit code (Decimal): 847168662 Exit facility code: 638 Exit error code: 50326 Exit message: Failed to retrieve data for this request. Start time: 2012-05-25 14:59:15 End time: 2012-05-25 15:00:09 Requested action: RunRules Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\Detail.txt Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.0.5500.0%26EvtType%3d0xEF814B06%400x92D13C14 Machine Properties: Machine name: EWAN-PC Machine processor count: 4 OS version: Windows Vista OS service pack: Service Pack 1 OS region: Australia OS language: English (United States) OS architecture: x86 Process architecture: 32 Bit OS clustered: No Package properties: Description: SQL Server Database Services 2008 SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9} ProductName: SQL2008 Type: RTM Version: 10 SPLevel: 0 Installation location: c:\385030d65c6ff61fb9\x86\setup\ Installation edition: EXPRESS User Input Settings: ACTION: RunRules CONFIGURATIONFILE: FEATURES: HELP: False INDICATEPROGRESS: False INSTANCENAME: QUIET: False QUIETSIMPLE: False RULES: GLOBALRULES,SqlUnsupportedProductBlocker,PerfMonCounterNotCorruptedCheck,Bids2005InstalledCheck,BlockInstallSxS,AclPermissionsFacet,FacetDomainControllerCheck,SSMS_IsInternetConnected,FacetWOW64PlatformCheck,FacetPowerShellCheck X86: False Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20120525_145905\ConfigurationFile.ini Detailed results: Rules with failures: Global rules: There are no scenario-specific rules. Rules report file: The rule result report file is not available. Exception summary: The following is an exception stack listing the exceptions in outermost to innermost order Inner exceptions are being indented Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException Message: Failed to retrieve data for this request. Data: HelpLink.ProdName = Microsoft SQL Server HelpLink.BaseHelpUrl = http://go.microsoft.com/fwlink HelpLink.LinkId = 20476 DisableWatson = true Stack: at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream) at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue() at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(HandleInternalException exceptionHandler) at Microsoft.SqlServer.Chainer.Setup.Setup.RunRequestedWorkflow() at Microsoft.SqlServer.Chainer.Setup.Setup.Run() at Microsoft.SqlServer.Chainer.Setup.Setup.Start() at Microsoft.SqlServer.Chainer.Setup.Setup.Main() Inner exception type: Microsoft.SqlServer.Configuration.Sco.ScoException Message: Attempted to perform an unauthorized operation. Data: WatsonData = HKEY_LOCAL_MACHINE@SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Microsoft SQL Server 10 Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) at Microsoft.SqlServer.Discovery.RegistryKeyExistsPropertyValueProvider.GetPropertyValue(Object[] context) at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetPropertyValueFromProvider(IPropertyValueProvider propertyValueProvider, String machineName, Object[] context) at Microsoft.SqlServer.Discovery.ObjectInstanceSettings.IsObjectFound(String machineName, String idFilter) at Microsoft.SqlServer.Discovery.Product.FilterObjectSet(ArrayList objects, String idFilter) at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent) at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData() at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request) at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request) Inner exception type: System.UnauthorizedAccessException Message: Attempted to perform an unauthorized operation. Stack: at Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.OpenSubKey(String subkey, RegistryAccess requestedAccess) Ineed to install SQL server 2008 R2 for one of the company softwares to work. Any immediate help will be greatly appreciated. Thanks Sonia

Read the article

High CPU usage - symptoms moving from server to server after bouncing

- by grt3kl

First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

Read the article

An Introduction to jQuery Templates

- by Stephen Walther

The goal of this blog entry is to provide you with enough information to start working with jQuery Templates. jQuery Templates enable you to display and manipulate data in the browser. For example, you can use jQuery Templates to format and display a set of database records that you have retrieved with an Ajax call. jQuery Templates supports a number of powerful features such as template tags, template composition, and wrapped templates. I’ll concentrate on the features that I think that you will find most useful. In order to focus on the jQuery Templates feature itself, this blog entry is server technology agnostic. All the samples use HTML pages instead of ASP.NET pages. In a future blog entry, I’ll focus on using jQuery Templates with ASP.NET Web Forms and ASP.NET MVC (You can do some pretty powerful things when jQuery Templates are used on the client and ASP.NET is used on the server). Introduction to jQuery Templates The jQuery Templates plugin was developed by the Microsoft ASP.NET team in collaboration with the open-source jQuery team. While working at Microsoft, I wrote the original proposal for jQuery Templates, Dave Reed wrote the original code, and Boris Moore wrote the final code. The jQuery team – especially John Resig – was very involved in each step of the process. Both the jQuery community and ASP.NET communities were very active in providing feedback. jQuery Templates will be included in the jQuery core library (the jQuery.js library) when jQuery 1.5 is released. Until jQuery 1.5 is released, you can download the jQuery Templates plugin from the jQuery Source Code Repository or you can use jQuery Templates directly from the ASP.NET CDN. The documentation for jQuery Templates is already included with the official jQuery documentation at http://api.jQuery.com. The main entry for jQuery templates is located under the topic plugins/templates. A Basic Sample of jQuery Templates Let’s start with a really simple sample of using jQuery Templates. We’ll use the plugin to display a list of books stored in a JavaScript array. Here’s the complete code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head> <title>Intro</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> When you open this page in a browser, a list of books is displayed: There are several things going on in this page which require explanation. First, notice that the page uses both the jQuery 1.4.4 and jQuery Templates libraries. Both libraries are retrieved from the ASP.NET CDN: <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> You can use the ASP.NET CDN for free (even for production websites). You can learn more about the files included on the ASP.NET CDN by visiting the ASP.NET CDN documentation page. Second, you should notice that the actual template is included in a script tag with a special MIME type: <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> This template is displayed for each of the books rendered by the template. The template displays a book picture, title, and price. Notice that the SCRIPT tag which wraps the template has a MIME type of text/x-jQuery-tmpl. Why is the template wrapped in a SCRIPT tag and why the strange MIME type? When a browser encounters a SCRIPT tag with an unknown MIME type, it ignores the content of the tag. This is the behavior that you want with a template. You don’t want a browser to attempt to parse the contents of a template because this might cause side effects. For example, the template above includes an <img> tag with a src attribute that points at “BookPictures/${picture}”. You don’t want the browser to attempt to load an image at the URL “BookPictures/${picture}”. Instead, you want to prevent the browser from processing the IMG tag until the ${picture} expression is replaced by with the actual name of an image by the jQuery Templates plugin. If you are not worried about browser side-effects then you can wrap a template inside any HTML tag that you please. For example, the following DIV tag would also work with the jQuery Templates plugin: <div id="bookTemplate" style="display:none"> <div> <h2>${title}</h2> price: ${formatPrice(price)} </div> </div> Notice that the DIV tag includes a style=”display:none” attribute to prevent the template from being displayed until the template is parsed by the jQuery Templates plugin. Third, notice that the expression ${…} is used to display the value of a JavaScript expression within a template. For example, the expression ${title} is used to display the value of the book title property. You can use any JavaScript function that you please within the ${…} expression. For example, in the template above, the book price is formatted with the help of the custom JavaScript formatPrice() function which is defined lower in the page. Fourth, and finally, the template is rendered with the help of the tmpl() method. The following statement selects the bookTemplate and renders an array of books using the bookTemplate. The results are appended to a DIV element named bookContainer by using the standard jQuery appendTo() method. $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); Using Template Tags Within a template, you can use any of the following template tags. {{tmpl}} – Used for template composition. See the section below. {{wrap}} – Used for wrapped templates. See the section below. {{each}} – Used to iterate through a collection. {{if}} – Used to conditionally display template content. {{else}} – Used with {{if}} to conditionally display template content. {{html}} – Used to display the value of an HTML expression without encoding the value. Using ${…} or {{= }} performs HTML encoding automatically. {{= }}-- Used in exactly the same way as ${…}. {{! }} – Used for displaying comments. The contents of a {{!...}} tag are ignored. For example, imagine that you want to display a list of blog entries. Each blog entry could, possibly, have an associated list of categories. The following page illustrates how you can use the { if}} and {{each}} template tags to conditionally display categories for each blog entry: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>each</title> <link href="1_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="blogPostContainer"></div> <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var blogPosts = [ { postTitle: "How to fix a sink plunger in 5 minutes", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Sinks", "Plumbing"] }, { postTitle: "How to remove a broken lightbulb", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna.", categories: ["HowTo", "Lightbulbs", "Electricity"] }, { postTitle: "New associate website", postEntry: "Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna." } ]; // Render the blog posts $("#blogPostTemplate").tmpl(blogPosts).appendTo("#blogPostContainer"); </script> </body> </html> When this page is opened in a web browser, the following list of blog posts and categories is displayed: Notice that the first and second blog entries have associated categories but the third blog entry does not. The third blog entry is “Uncategorized”. The template used to render the blog entries and categories looks like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> Notice the special expression $value used within the {{each}} template tag. You can use $value to display the value of the current template item. In this case, $value is used to display the value of each category in the collection of categories. Template Composition When building a fancy page, you might want to build a template out of multiple templates. In other words, you might want to take advantage of template composition. For example, imagine that you want to display a list of products. Some of the products are being sold at their normal price and some of the products are on sale. In that case, you might want to use two different templates for displaying a product: a productTemplate and a productOnSaleTemplate. The following page illustrates how you can use the {{tmpl}} tag to build a template from multiple templates: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Composition</title> <link href="2_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContainer"> <h1>Products</h1> <div id="productListContainer"></div>  <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script>  <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script>  <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> var products = [ { name: "Laptop", onSale: false }, { name: "Apples", onSale: true }, { name: "Comb", onSale: false } ]; $("#productListTemplate").tmpl(products).appendTo("#productListContainer"); </script> </div> </body> </html> In the page above, the main template used to display the list of products looks like this: <script id="productListTemplate" type="text/x-jQuery-tmpl"> <div> {{if onSale}} {{tmpl "#productOnSaleTemplate"}} {{else}} {{tmpl "#productTemplate"}} {{/if}} </div> </script> If a product is on sale then the product is displayed with the productOnSaleTemplate (which includes an on sale image): <script id="productOnSaleTemplate" type="text/x-jQuery-tmpl"> <b>${name}</b> <img src="images/on_sale.png" alt="On Sale" /> </script> Otherwise, the product is displayed with the normal productTemplate (which does not include the on sale image): <script id="productTemplate" type="text/x-jQuery-tmpl"> ${name} </script> You can pass a parameter to the {{tmpl}} tag. The parameter becomes the data passed to the template rendered by the {{tmpl}} tag. For example, in the previous section, we used the {{each}} template tag to display a list of categories for each blog entry like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{each categories}} <i>${$value}</i> {{/each}} {{else}} Uncategorized {{/if}} </script> Another way to create this template is to use template composition like this: <script id="blogPostTemplate" type="text/x-jQuery-tmpl"> <h1>${postTitle}</h1> <p> ${postEntry} </p> {{if categories}} Categories: {{tmpl(categories) "#categoryTemplate"}} {{else}} Uncategorized {{/if}} </script> <script id="categoryTemplate" type="text/x-jQuery-tmpl"> <i>${$data}</i>   </script> Using the {{each}} tag or {{tmpl}} tag is largely a matter of personal preference. Wrapped Templates The {{wrap}} template tag enables you to take a chunk of HTML and transform the HTML into another chunk of HTML (think easy XSLT). When you use the {{wrap}} tag, you work with two templates. The first template contains the HTML being transformed and the second template includes the filter expressions for transforming the HTML. For example, you can use the {{wrap}} template tag to transform a chunk of HTML into an interactive tab strip: When you click any of the tabs, you see the corresponding content. This tab strip was created with the following page: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Wrapped Templates</title> <style type="text/css"> body { font-family: Arial; background-color:black; } .tabs div { display:inline-block; border-bottom: 1px solid black; padding:4px; background-color:gray; cursor:pointer; } .tabs div.tabState_true { background-color:white; border-bottom:1px solid white; } .tabBody { border-top:1px solid white; padding:10px; background-color:white; min-height:400px; width:400px; } </style> </head> <body> <div id="tabsView"></div> <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script> <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Global for tracking selected tab var selectedTabIndex = 0; // Render the tab strip $("#tabsContent").tmpl().appendTo("#tabsView"); // When a tab is clicked, update the tab strip $("#tabsView") .delegate(".tabState_false", "click", function () { var templateItem = $.tmplItem(this); selectedTabIndex = $(this).index(); templateItem.update(); }); </script> </body> </html> The “source” for the tab strip is contained in the following template: <script id="tabsContent" type="text/x-jquery-tmpl"> {{wrap "#tabsWrap"}} <h3>Tab 1</h3> <div> Content of tab 1. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 2</h3> <div> Content of tab 2. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> <h3>Tab 3</h3> <div> Content of tab 3. Lorem ipsum dolor <b>sit</b> amet, consectetuer adipiscing elit. Maecenas porttitor congue massa. Fusce posuere, magna sed pulvinar ultricies, purus lectus malesuada libero, sit amet commodo magna eros quis urna. </div> {{/wrap}} </script> The tab strip is created with a list of H3 elements (which represent each tab) and DIV elements (which represent the body of each tab). Notice that the HTML content is wrapped in the {{wrap}} template tag. This template tag points at the following tabsWrap template: <script id="tabsWrap" type="text/x-jquery-tmpl"> <div class="tabs"> {{each $item.html("h3", true)}} <div class="tabState_${$index === selectedTabIndex}"> ${$value} </div> {{/each}} </div> <div class="tabBody"> {{html $item.html("div")[selectedTabIndex]}} </div> </script> The tabs DIV contains all of the tabs. The {{each}} template tag is used to loop through each of the H3 elements from the source template and render a DIV tag that represents a particular tab. The template item html() method is used to filter content from the “source” HTML template. The html() method accepts a jQuery selector for its first parameter. The tabs are retrieved from the source template by using an h3 filter. The second parameter passed to the html() method – the textOnly parameter -- causes the filter to return the inner text of each h3 element. You can learn more about the html() method at the jQuery website (see the section on $item.html()). The tabBody DIV renders the body of the selected tab. Notice that the {{html}} template tag is used to display the tab body so that HTML content in the body won’t be HTML encoded. The html() method is used, once again, to grab all of the DIV elements from the source HTML template. The selectedTabIndex global variable is used to display the contents of the selected tab. Remote Templates A common feature request for jQuery templates is support for remote templates. Developers want to be able to separate templates into different files. Adding support for remote templates requires only a few lines of extra code (Dave Ward has a nice blog entry on this). For example, the following page uses a remote template from a file named BookTemplate.htm: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Remote Templates</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg" }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg" }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg" }, ]; // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> The remote template is retrieved (and rendered) with the following code: // Get the remote template $.get("BookTemplate.htm", null, function (bookTemplate) { // Render the books using the remote template $.tmpl(bookTemplate, books).appendTo("#bookContainer"); }); This code uses the standard jQuery $.get() method to get the BookTemplate.htm file from the server with an Ajax request. After the BookTemplate.htm file is successfully retrieved, the $.tmpl() method is used to render an array of books with the template. Here’s what the BookTemplate.htm file looks like: <div> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> Notice that the template in the BooksTemplate.htm file is not wrapped by a SCRIPT element. There is no need to wrap the template in this case because there is no possibility that the template will get interpreted before you want it to be interpreted. If you plan to use the bookTemplate multiple times – for example, you are paging or sorting the books -- then you should compile the template into a function and cache the compiled template function. For example, the following page can be used to page through a list of 100 products (using iPhone style More paging). <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Caching</title> <link href="6_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Products</h1> <div id="productContainer"></div> <button id="more">More</button> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Globals var pageIndex = 0; // Create an array of products var products = []; for (var i = 0; i < 100; i++) { products.push({ name: "Product " + (i + 1) }); } // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); }); $("#more").click(function () { pageIndex++; renderProducts(); }); function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> The ProductTemplate is retrieved from an external file named ProductTemplate.htm. This template is retrieved only once. Furthermore, it is compiled and cached with the help of the $.template() method: // Get the remote template $.get("ProductTemplate.htm", null, function (productTemplate) { // Compile and cache the template $.template("productTemplate", productTemplate); // Render the products renderProducts(0); }); The $.template() method compiles the HTML representation of the template into a JavaScript function and caches the template function with the name productTemplate. The cached template can be used by calling the $.tmp() method. The productTemplate is used in the renderProducts() method: function renderProducts() { // Get page of products var pageOfProducts = products.slice(pageIndex * 5, pageIndex * 5 + 5); // Used cached productTemplate to render products $.tmpl("productTemplate", pageOfProducts).appendTo("#productContainer"); } In the code above, the first parameter passed to the $.tmpl() method is the name of a cached template. Working with Template Items In this final section, I want to devote some space to discussing Template Items. A new Template Item is created for each rendered instance of a template. For example, if you are displaying a list of 100 products with a template, then 100 Template Items are created. A Template Item has the following properties and methods: data – The data associated with the Template Instance. For example, a product. tmpl – The template associated with the Template Instance. parent – The parent template item if the template is nested. nodes – The HTML content of the template. calls – Used by {{wrap}} template tag. nest – Used by {{tmpl}} template tag. wrap – Used to imperatively enable wrapped templates. html – Used to filter content from a wrapped template. See the above section on wrapped templates. update – Used to re-render a template item. The last method – the update() method -- is especially interesting because it enables you to re-render a template item with new data or even a new template. For example, the following page displays a list of books. When you hover your mouse over any of the books, additional book details are displayed. In the following screenshot, details for ASP.NET Kick Start are displayed. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Template Item</title> <link href="0_Site.css" rel="stylesheet" type="text/css" /> </head> <body> <div id="pageContent"> <h1>ASP.NET Bookstore</h1> <div id="bookContainer"></div> </div> <script id="bookTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} </div> </script> <script id="bookDetailsTemplate" type="text/x-jQuery-tmpl"> <div class="bookItem"> <img src="BookPictures/${picture}" alt="" /> <h2>${title}</h2> price: ${formatPrice(price)} <p> ${description} </p> </div> </script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.4.4.js"></script> <script type="text/javascript" src="http://ajax.aspnetcdn.com/ajax/jquery.templates/beta1/jquery.tmpl.js"></script> <script type="text/javascript"> // Create an array of books var books = [ { title: "ASP.NET 4 Unleashed", price: 37.79, picture: "AspNet4Unleashed.jpg", description: "The most comprehensive book on Microsoft’s new ASP.NET 4.. " }, { title: "ASP.NET MVC Unleashed", price: 44.99, picture: "AspNetMvcUnleashed.jpg", description: "Writing for professional programmers, Walther explains the crucial concepts that make the Model-View-Controller (MVC) development paradigm work…" }, { title: "ASP.NET Kick Start", price: 4.00, picture: "AspNetKickStart.jpg", description: "Visual Studio .NET is the premier development environment for creating .NET applications…." }, { title: "ASP.NET MVC Unleashed iPhone", price: 44.99, picture: "AspNetMvcUnleashedIPhone.jpg", description: "ASP.NET MVC Unleashed for the iPhone…" }, ]; // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); }); function formatPrice(price) { return "$" + price.toFixed(2); } </script> </body> </html> There are two templates used to display a book: bookTemplate and bookDetailsTemplate. When you hover your mouse over a template item, the standard bookTemplate is swapped out for the bookDetailsTemplate. The bookDetailsTemplate displays a book description. The books are rendered with the bookTemplate with the following line of code: // Render the books using the template $("#bookTemplate").tmpl(books).appendTo("#bookContainer"); The following code is used to swap the bookTemplate and the bookDetailsTemplate to show details for a book: // Get compiled details template var bookDetailsTemplate = $("#bookDetailsTemplate").template(); // Add hover handler $(".bookItem").mouseenter(function () { // Get template item associated with DIV var templateItem = $(this).tmplItem(); // Change template to compiled template templateItem.tmpl = bookDetailsTemplate; // Re-render template templateItem.update(); }); When you hover your mouse over a DIV element rendered by the bookTemplate, the mouseenter handler executes. First, this handler retrieves the Template Item associated with the DIV element by calling the tmplItem() method. The tmplItem() method returns a Template Item. Next, a new template is assigned to the Template Item. Notice that a compiled version of the bookDetailsTemplate is assigned to the Template Item’s tmpl property. The template is compiled earlier in the code by calling the template() method. Finally, the Template Item update() method is called to re-render the Template Item with the bookDetailsTemplate instead of the original bookTemplate. Summary This is a long blog entry and I still have not managed to cover all of the features of jQuery Templates J However, I’ve tried to cover the most important features of jQuery Templates such as template composition, template wrapping, and template items. To learn more about jQuery Templates, I recommend that you look at the documentation for jQuery Templates at the official jQuery website. Another great way to learn more about jQuery Templates is to look at the (unminified) source code.

Read the article

Top 20 Daily Deal Sites In India

- by Damodhar

If you have never heard of Groupon recently, you probably are not working in the tech industry because it is all over the blogosphere. After all, growing from zero to US$1.35 billion valuation in 18 months is pretty AMAZING. Inspired by this, the following bunch of Groupon clone’s are already rising in India. Definitely this business model is emerging and changes the way online shopping happens in India. SnapDeal SnapDeal features a Best deals Coupons at an unbeatable price on the best stuff to do, see, eat, and buy in our city. It provides vouchers and discounts in all the major cities like Delhi, Mumbai, Chennai and Bangalore. KhojGuru Exclusive Discount coupons from hundreds of brands and retailers. These discounts can be easily downloaded as an SMS on to the mobile phone or their print out can be taken. MyDala A platform which gets us great deals in our city.Leveraging the “power of group buying”. Group buying happens when like minded people come together to get deals that we can never get on our own as individuals. SoSasta Great place which would not only tell us about the hidden treasures of our city — but also made them affordable to us at the end of the month. DealsAndYou Deals and You is a group buying portal that features a daily deal on the best stuff in some of India’s leading cities. AajKaCatch Its concept is to provide you the most unique, useful and qualitative product at a very low price. So you can now shop without the hassles of clustered products. BindassBargain Bindaas Bargain offers a new deal every day! Great stuff ranging from cool gadgets, home theatres, luxury watches, smash games. MasthiDeals It get you a great deal on a great stuff to do, eat, buy or see in your city. They have a team of about 25 wonderful people working in Chennai office working side by side with folks in MasthiDeal’s other cities. Koovs Founded by a team of IIT alumni who have brought in their expertise from the internet industry. Koovs is a Bangalore based start up and one point solution for all your desires. Taggle It brings you a variety of offers from some of the most respected brands in the country.This website uses collective buying to create a win-win for local businesses and their customers. BuzzInTown Buzzintown.com is a portal owned by Wortal Inc. There are a US headquartered company, with a presence pan-India through their India subsidiary, managed by a vastly experienced set of global leaders from the media, entertainment and technology industries. BuyThePrice It lines up the best win – win deals for both consumers and vendors and also ensures that each of the orders are dispatched in the shortest time possible. 24HoursLoot 24hoursLoot is an online store for selling a new t-shirt (sometime other products) everyday at deep discounted price in limited quantity/stock. DealMagic Customers get exposure to the best their city has to offer, at unbeatable prices (50-90% off). We never feature more than one business on our website on any given day, so we have to be very very selective on who gets featured. Dealivore ICUMI Technologies Pvt Ltd is the company operating the Dealivore service. Founded in December 2009, ICUMI is privately owned and funded. LootMore An online store that exclusively focuses on selling cool quality stuff at cheap prices. Here you’ll always find the latest and greatest brands at prices you can afford. Foodome The deals features the best coupons at an unbeatable price on restaurants, fine dining on where to spend your birthday party.They provide coupon only in Chennai as of now. Top Online Shopping Sites- Nation Wide ebay.in eBay is The World’s Online Marketplace, enabling trade on a local, national and international basis. With a diverse and passionate community of individuals and small businesses, eBay offers an online platform where millions of items are traded each day. FutureBazzar Future Group, led by its founder and Group CEO, Mr. Kishore Biyani, is one of India’s leading business houses with multiple businesses spanning across the consumption space. TradeUs Launched in July 2009 and in a short span of time it has turned into one of India’s foremost shopping portals setting the Indian e-commerce abode aflame. BigShoeBazzar (BSB) is the largest online authorized shoe store in South Asia. Croma Promoted by Infiniti Retail Ltd, a 100% subsidiary of Tata Sons.One of the world’s leading retailers, ensuring that you buy nothing but the best. This article titled,Top 20 Daily Deal Sites In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

SQL SERVER – Enumerations in Relational Database – Best Practice

- by pinaldave

Marko Parkkola This article has been submitted by Marko Parkkola, Data systems designer at Saarionen Oy, Finland. Marko is excellent developer and always thinking at next level. You can read his earlier comment which created very interesting discussion here: SQL SERVER- IF EXISTS(Select null from table) vs IF EXISTS(Select 1 from table). I must express my special thanks to Marko for sending this best practice for Enumerations in Relational Database. He has really wrote excellent piece here and welcome comments here. Enumerations in Relational Database This is a subject which is very basic thing in relational databases but often not very well understood and sometimes badly implemented. There are of course many ways to do this but I concentrate only two cases, one which is “the right way” and one which is definitely wrong way. The concept Let’s say we have table Person in our database. Person has properties/fields like Firstname, Lastname, Birthday and so on. Then there’s a field that tells person’s marital status and let’s name it the same way; MaritalStatus. Now MaritalStatus is an enumeration. In C# I would definitely make it an enumeration with values likes Single, InRelationship, Married, Divorced. Now here comes the problem, SQL doesn’t have enumerations. The wrong way This is, in my opinion, absolutely the wrong way to do this. It has one upside though; you’ll see the enumeration’s description instantly when you do simple SELECT query and you don’t have to deal with mysterious values. There’s plenty of downsides too and one would be database fragmentation. Consider this (I’ve left all indexes and constraints out of the query on purpose). CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] NVARCHAR(10) ) You have nvarchar(20) field in the table that tells the marital status. Obvious problem with this is that what if you create a new value which doesn’t fit into 20 characters? You’ll have to come and alter the table. There are other problems also but I’ll leave those for the reader to think about. The correct way Here’s how I’ve done this in many projects. This model still has one problem but it can be alleviated in the application layer or with CHECK constraints if you like. First I will create a namespace table which tells the name of the enumeration. I will add one row to it too. I’ll write all the indexes and constraints here too. CREATE TABLE [CodeNamespace] ( [Id] INT IDENTITY(1, 1), [Name] NVARCHAR(100) NOT NULL, CONSTRAINT [PK_CodeNamespace] PRIMARY KEY ([Id]), CONSTRAINT [IXQ_CodeNamespace_Name] UNIQUE NONCLUSTERED ([Name]) ) GO INSERT INTO [CodeNamespace] SELECT 'MaritalStatus' GO Then I create a table that holds the actual values and which reference to namespace table in order to group the values under different namespaces. I’ll add couple of rows here too. CREATE TABLE [CodeValue] ( [CodeNamespaceId] INT NOT NULL, [Value] INT NOT NULL, [Description] NVARCHAR(100) NOT NULL, [OrderBy] INT, CONSTRAINT [PK_CodeValue] PRIMARY KEY CLUSTERED ([CodeNamespaceId], [Value]), CONSTRAINT [FK_CodeValue_CodeNamespace] FOREIGN KEY ([CodeNamespaceId]) REFERENCES [CodeNamespace] ([Id]) ) GO -- 1 is the 'MaritalStatus' namespace INSERT INTO [CodeValue] SELECT 1, 1, 'Single', 1 INSERT INTO [CodeValue] SELECT 1, 2, 'In relationship', 2 INSERT INTO [CodeValue] SELECT 1, 3, 'Married', 3 INSERT INTO [CodeValue] SELECT 1, 4, 'Divorced', 4 GO Now there’s four columns in CodeValue table. CodeNamespaceId tells under which namespace values belongs to. Value tells the enumeration value which is used in Person table (I’ll show how this is done below). Description tells what the value means. You can use this, for example, column in UI’s combo box. OrderBy tells if the values needs to be ordered in some way when displayed in the UI. And here’s the Person table again now with correct columns. I’ll add one row here to show how enumerations are to be used. CREATE TABLE [dbo].[Person] ( [Firstname] NVARCHAR(100), [Lastname] NVARCHAR(100), [Birthday] datetime, [MaritalStatus] INT ) GO INSERT INTO [Person] SELECT 'Marko', 'Parkkola', '1977-03-04', 3 GO Now I said earlier that there is one problem with this. MaritalStatus column doesn’t have any database enforced relationship to the CodeValue table so you can enter any value you like into this field. I’ve solved this problem in the application layer by selecting all the values from the CodeValue table and put them into a combobox / dropdownlist (with Value field as value and Description as text) so the end user can’t enter any illegal values; and of course I’ll check the entered value in data access layer also. I said in the “The wrong way” section that there is one benefit to it. In fact, you can have the same benefit here by using a simple view, which I schema bound so you can even index it if you like. CREATE VIEW [dbo].[Person_v] WITH SCHEMABINDING AS SELECT p.[Firstname], p.[Lastname], p.[BirthDay], c.[Description] MaritalStatus FROM [dbo].[Person] p JOIN [dbo].[CodeValue] c ON p.[MaritalStatus] = c.[Value] JOIN [dbo].[CodeNamespace] n ON n.[Id] = c.[CodeNamespaceId] AND n.[Name] = 'MaritalStatus' GO -- Select from View SELECT * FROM [dbo].[Person_v] GO This is excellent write up byMarko Parkkola. Do you have this kind of design setup at your organization? Let us know your opinion. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Database, DBA, Readers Contribution, Software Development, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Search Results

Search found 12909 results on 517 pages for 'clustered index'.

Page 314/517 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321 | Next Page >

- by HecklerMark

- by ccasares

- by user104195

- by eric.maurice

- by Simon Cooper

- by Timmy Kokke

- by arungupta

- by Daniel Moth

- by Rob Farley

- by Gurubalan

- by Mladen Prajdic

- by Yousef_Jadallah

- by P. Avery

- by cam77

- by Nuwan

- by Derek Organ

- by Sonia

- by grt3kl

- by Stephen Walther

- by Damodhar

- by pinaldave

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321 | Next Page >