Search Results

Search found 11466 results on 459 pages for 'geo ip'.

Page 314/459 | < Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >

• Thomson TG585v7 router - promiscuous mode

  - by Nikita

  I have a TG585v7 as a router with several machines plugged into it. In the default setup, the packets are only delivered to the specific machine but I want to be able to setup to monitor all network traffic on one of the machines, i.e. I need those packets to be picked up when my ethernet card is in promiscuous mode. Is this possible? Guide here has this "mcastpromisc Make the IP interface multicast promiscuous. OPTIONAL", is this what I am looking for? Does it mean I need to manually add all my machines by their MAC addresses to be able to receive packets destined for them? Or am I out of luck and I need to get a better router?

  Read the article

• Can I run a web site from my home network without jeapordizing other computers on my LAN?

  - by Alchemical

  I have a home LAN with 5 computers and a NAS, all connected to a Linksys router which is connected to my Cox cable modem. I'm interested in having one of my computers run an IIS-based web site and to have it be accessible to the internet with a static IP. However, I do not want o jeapordize the safety of the other computers on my home network! Is there anyway to do this safely, or as safe as possible? I may also like to run an FTP server from this computer. Finally, optionally I would like to allow remote access to this computer from the internet--but it seems to me that that may increase the security risk to the other computers substantially.

  Read the article

• Nagios3 gives a warning on HTTP service monitoring

  - by Dez

  Already set up my local net configuration to be monitored by Nagios3. I found a problem that Nagios3 reports a warning in the HTTP monitoring service of a Debian server set at ip 192.168.1.52, that has an individual virtual host and a mass virtual host for application development. I get this status message: HTTP WARNING: HTTP/1.1 404 Not Found I used the Nagios tools to check. servername is the name of the vhost server name I used in the Apache configuration. /usr/lib/nagios/plugins/check_http -H servername -I 192.168.1.52 receiving this status message: HTTP OK HTTP/1.1 200 OK - 37900 bytes in 0.504 seconds |time=0.503946s;;;0.000000 size=37900B;;;0 But when I check like this: /usr/lib/nagios/plugins/check_http -I 192.168.1.52 I get the same status message as the warning, so I assume that I don't have Nagios completely well set up because doesn't recognize the vhosts for that server, how it should be as the check_http service shows. Where should I look to fix that warning?

  Read the article

• firehol (firewall) with bridge: how to filter

  - by Leon

  I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

  Read the article

• how to access locally deployed webapp on ipodtouch ?

  - by abhinav

  Hi, I have a wifi network at home with a couple of laptops. I am running a Tapestry webapp on my machine. I can access this webapp from the other laptop if I use the IP address of my machine (I mean enter something like : http://192.168.1.53:8080/webapp/index.html). Now, I also want to access the same webapp through my iPodTouch which is also in this wifi network. However, when I try to do so in Safari on iPodTouch, it fails. Could someone point out what's the problem here ? Thanks, Abhinav

  Read the article

• Asterisk: Forcing a sip peer to connect via ipv6?

  - by growse

  I've got an asterisk server that connects to an upstream provider over a WAN. The upstream provider supports both IPv4 and IPv6 connectivity, and the asterisk server is behind a NAT. When asterisk connects to the upstream sip peer via IPv6, everything works perfectly. The issue I have is that when I configure the asterisk server IPv6 address via DHCPv6, a race condition means that asterisk sometimes ends up attempting to contact the upstream peer via IPv4 (the SIP DNS name has both A and AAAA records). This is because asterisk starts up before the system has a valid IPv6 address. The connection does not work via IPv4 because of the NAT. Is there a way of configuring the peer to specify that it should only be contactable over IPv6? I guess it might be possible to hack together a firewall rule to deny all IPv4 traffic to that IP, but it'd be easier to configure this within asterisk itself.

  Read the article

• Using a buffalo wl12-pci-g54s on Debian Linux

  - by Nic Hubbard

  I have a buffalo wl12-pci-g54s wireless card that I want to install in my PC running Debian. I need this so I can move the server to a better location in another room. So, is there an easy way to do this? Some package that I can install and get up and running? Other instructions that I found online have been confusing. I am also using a static IP, so I need to retain that when I make the switch. Thanks!

  Read the article

• wireless access point

  - by Warren Bullock III

  I'm hoping to get some suggestions for possible Wireless Access point/router models which will allow us to have two separate networks. We run an internal network on 10.x.x.x IP range where we have shares and other network resources for which we would like to have our regular users access. However, we would also like to offer a separate wireless network for guests which ideally would be on 192.168.x.x and these users would not be able to see any of the resources sitting on the 10.x.x.x network. Anyone have any recommendations on single devices that might be able to get the job done? I was looking at the Linksys E4200 and it seems to support what I'm looking to do... any others? Thanks in advance for any suggestions.

  Read the article

• Cisco IOS PBR - PBRing Skype

  - by Azz

  I've got a very simple question, which seems to be extremely difficult when put into practice. I have a Cisco IOS router with two Internet links (one over a WAN, through a proxy, everywhere, etc.) the other direct Internet. Most traffic destined for the internet goes through the proxy over the WAN. I want Skype traffic (why the client uses skype, I don't know..) to go out of the Internet link, while the rest of the traffic goes over the WAN through the proxy, etc. Apparently skype is very difficult to detect/classify because of it's many adaptations to being blocked. Is there any way to identify Skype on an IOS router (2911), and set it's next hop IP/interface? Thank you, Aaron

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• How can I access shared XP files over wifi with an Archos 5 Internet Tablet with Android?

  - by Fred

  I have an Archos 5 Internet tablet with Android. I have been using it to stream video over my XP wifi network. Yesterday the Archos stopped seeing any of my computers. I have found some programs that allow me to see the network, so I know the hardware works. However, this program does not allow me to pick the correct program to play the files I want. I suspect the problem lies somewhere on the XP side. This would probably work better if the Archos 5 allowed me to manually input the IP address. Help?

  Read the article

• keeping URL domain the same when pointing A record to a hosting account

  - by kwight

  Hello, I have a new WordPress website and a legacy billing system. For technical reasons, they cannot be on the same hosting plan. The hosting account for billing (and the original abc.com website) also manages DNS and mail. I'm trying to incorporate the new website under the same domain, eg. abc.com (website, on a different hosting account) and billing.abc.com (billing). I assume the answer is having a different A record for abc.com. I currently have a CPanel shared hosting account to use for the website (but can upgrade if necessary). How would I set this up in CPanel, so that the URLs work properly? Do I need a dedicated IP and then add the domain as an add-on domain? Thanks

  Read the article

• Wireless printer going offline upon entering power save mode

  - by Regmi

  I recently bought a printer, Samsung ML1865W, a wireless laser printer. It works very well, wirelessly until after a while, it goes to power save mode when the printer goes offline. I then cannot connect to the printer (pinging the ip and various ports associated with it do not give any response) until I power cycle the printer. I have checked my wireless settings and my router, I have installed the printer software in WinXP, Win2000 and in Mac and the printer behaves just the same. Any ideas if the printer hardware itself is broken or that its something on my network/application side that's the culprit. If you own the printer, have you had any trouble like that at any time?

  Read the article

• Multiple URLs on one domain in IIS 6 [closed]

  - by TGnat

  Possible Duplicate: How to Host Multiple Domains / Web Sites on one IIS6 Server I'm a developer and only know the basics of IIS administration. I want to give each of my clients a personalized URL to access my web site. I have mySite.com and I would like to allow client A to acess the site via A.mySite.com and client B to use B.mySite.com. These would all point the the mySite.com domain with the same ip address. Can this be done in IIS? Do I have to register new domains for each client? Are there other ways to accomplish the same thing?

  Read the article

• VIDEO Streaming - How to output the video timestamp?

  - by Emmanuel Brunet

  I would like to backup an ASF video stream with the time stamp (I mean the original recording date/time) on the output stream ? Usage I convert / store my video using the mkv format (Matroska) with libx264 (video) and aac (audio) codecs. Assume the IP camera webcam user account is account, the password password $ ffmpeg -i http://admin:alpha1237@webcam/videostream.asf -c:v libx264 -s 768X432 -crf 13 -b:v 2500K -pix_fmt yuv420p -c:a libfdk_aac output.mkv This works fine on a tenvis JPT3815W camera How to I need to get the video timestamp available for display as a subtitle or other meta data field managed by standard video players, and ideally to be able to hide it or not during video reading. Does anybody knows how to achieve that ? Thanks in advance for your help.

  Read the article

• TightVNC grey screen?

  - by gary

  I'm trying to help my mom remotely with some PC problems. She's not too computer savvy, so to keep the firewall stuff on my side of things, I tried to use a reverse VNC connection: On my machine, I set up TightVNC client in listening mode. I also opened TCP port 5500 on my router and firewall, and checked it using http://canyouseeme.org/. On her machine, I (instructed her to) set up TightVNC server, and connect to my machine's IP ('Add New Client...'). Both machines run Windows XP & TightVNC 1.3.10. The problem: When she tries to connect, a TightVNC window with grey background pops up on my machine, but I never get to see the remote desktop. It just remains grey. However, it seems that I control the mouse on the remote side (she says it's moving). I tried to reverse-connect from another machine on my LAN and it works without a problem. Any idea what the problem could be?

  Read the article

• IIS 6.0 subdomains with host headers and non existent subdomains

  - by Mustafakidd

  Hey Everyone - We have a wildcard A-Record pointing to our IP and have a number of sites running on IIS 6 with host headers and have a a wildcard SSL certificate for the domain so that each site can run under SSL. For example: https://A.foo.com https:/B.foo.com https:/C.foo.com Everything is working well but I noticed that when we type a non existent subdomain, say D.foo.com, it redirects to A.foo.com. Any idea why that is or how I can change that? I think we may have set up the A.foo.com site before we applied the wildcard A-record with our domain provider and before we had set up the SSL cert. Thanks.

  Read the article

• How to open ports on router for better torrent performance

  - by Mehper C. Palavuzlar

  I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my router settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My router: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

  Read the article

• CentOS 6.5 as WebServer for Django Dev

  - by Charlesliam

  During CentOS 6.5 Installation I choose WebServer type for this computer. The server has a static IP address 192.168.111.100. The CentOS was updated I managed to install virtualenv with Python 2.7. Within the virtualenv, I'll be using Django Framework. After I tried to run the command using root user python manage.py runserver 0.0.0.0:8000 I can't see the website from other computer within the LAN when I try to type 192.168.111.100:8000/admin on my browser. I already disable firewall using service iptables stop I can ping the 192.168.111.100 and I have a good feedback with nslookup. What seems the problem of my config?

  Read the article

• Amazon EC2 migration from one region to the other

  - by Gnanam

  I'm using the following Amazon EC2 resources in the US East (Virginia) region: 1 Running Instance 1 Elastic IP 2 EBS Volumes 100 EBS Snapshots 1 Key Pair 2 Security Groups 5 My Own AMIs (customized based on my application stack) My instance is based on Linux distribution (CentOS) and my AMIs are S3-backed. Both EBS volumes are mounted on this running instance. We're planning to migrate our deployment to US-West region. Because Amazon EC2 resources are not shared across regions, my questions are: What are all the factors that I need to consider in advance? What are all the recommended & different ways of migrating each EC2 resources from one region to the other? Are there any hidden risks involved during and/or after the migration? Experts ideas/suggestions/recommendations on this are highly appreciated.

  Read the article

• I would like to start multiple computers at once, What software do I use?

  - by Matt 'Trouble' Esse

  I have turned on Wake On Lan on all of the BIOSes in the PCs and I have a simple batch file that runs a free command wolcmd.exe Wake on Lan Command Line The syntax is as follows: wolcmd [mac address] [ip address] [subnet mask] [port number] The batch file looks a little like this.... wolcmd 009027a324fe 195.188.159.20 255.255.255.0 8900 wolcmd 009024a731da 212.86.64.31 255.255.255.0 8900 It's OK but It's not very user friendly (I need to set this up for other people to use and administer) Can you suggest a Windows (XP/Vixta/7) Alternative with a GUI? Free is cool, but a good paid for version is fine if you think it's worth it! Thanks in advance for your informed suggestions

  Read the article

• Linux Router - Share bandwidth per IPs with current active connections

  - by SRoe

  We have a Linux machine running as a custom router, currently utilising Shorewall. This sits between our incoming internet connection and the internal LAN. What we would like to achieve is 'fair use' of the bandwidth on a per IP basis. If only one person currently has an active connection then they get 100% utilisation of the line. However if 20 people have active connections then they should each get 5% utilisation of the line. This should be irrespective of the number of connections held by each user. For example, say we have two users, Bill and Ted, that both have active connections. Bill has a single active connection while Ted has ten active connections. Bill should get 50% utilisation for his single connections whilst Ted should get 5% utilisation for each of his ten connections, giving Ted a total utilisation of 50%.

  Read the article

• Using 2 Transparent HAProxy for load balancing

  - by Nyxynyx

  We can configure HAProxy to be a transparent proxy by using the guide here, where one of the steps says ...to put the backend servers in a different subnet to the front end clients and make sure that the default gateway points back at the HAProxy load balancer. However when we need to have 2 transparent HAProxy in front of our balanced servers (for redundancy), it seems like this wont work as we can only set one gateway for our balanced servers. What will be the correct way to setup the system such that we can have 2 transparent HAProxy infront of the balanced servers? The main reason for having transparent proxies is the need to find the client's IP addresses over TCP.

  Read the article

• Separating two networks

  - by Farhan Ali

  I have two routers, R1 and R2. R1 (a stock linksys router running dd-wrt) is connected to internet and is serving internet to a network of 5 devices/PCs running a DHCP server, with a network of 192.168.1.0/24. R1 also serves internet services to R2. R2 (a ubuntu server 12.04) gets internet from R1. R2 has 3 PCs attached to it, runs a DHCP server with a network of 172.22.22.0/24. My requirement is that the clients on both sides should not talk to each other at all – with the exception that R1 clients may access the R2 router through its IP of 192.168.1.x. At the moment, R2 clients are able to ping R1 clients, which is unacceptable, whereas R1 clients cannot ping R2 clients, which is OK. I believe iptables could be set up but I don't know how.

  Read the article

• NAS disk - problem with accessing SAMBA

  - by dominolog

  Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

  Read the article

< Previous Page | 310 311 312 313 314 315 316 317 318 319 320 321  | Next Page >