Search Results

Search found 11466 results on 459 pages for 'geo ip'.

Page 315/459 | < Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >

• NAS disk - problem with accessing SAMBA

  - by dominolog

  Hello I have a NAS disk running on some version of Linux. The disk is located in local network (5 PC running XP or Vista, all connected to Linksys Router). I have problems accessing NAS resources through SAMBA. The 1st issue is that the NAS is not accessible through hostname (even if it is configured), 2nd point is that it is mostly not accessible through IP manner (\IP_OF_NAS). Rest of services (FTP, HTTP access) works flawlessly. I connected the NAS to my home network (only 1 WinXP and Linsys router) and the NAS is working fine - SAMBA access together with hostname recognition works perfectly. I wonder this is an issue with WINS? Could anybody help? Regards

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Computer with OpenVPN client: 192.168.0.3 Computer that has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried the following, which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.100 Thanks!

  Read the article

• Problems connecting Centos on VMware player to the network using bridged connection.

  - by Sakin

  Hi, I installed CentOs on VMware Player 3.0.1 running on windows XP. When trying to configure it to connect to the internet in a bridged configuration, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. Everything works fine when using a NAT connection through my host. How can I make the bridge work for me? Thanks.

  Read the article

• Configuring Apache reverse proxy

  - by Martin

  I have loadbalancer server and edges. I am trying to configure reverse proxy in order to hide the backend servers PL1,2,3. PL 1,2,3 are not located in same subnet. They are located in different locations. PL1 Lb1 -> PL2 PL3 I tried to configure Apache reverse proxy but it is not sending request to PL1,2,3. Reverse proxy worked only when I configured apache to send request to local server on other port. ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /PL1 http://PL1server.com/ ProxyPassReverse /PL1 http://PL1server.com/ The above configuration did not worked. Could you help me to solve the issue. Or is there other proxy types like Squid,Socks5 to solve this issue. Does the reverse proxy fails if we use IP address or domain URL in ProxyPass and ProxyPassReverse ?

  Read the article

• Remote connection to SQL server doesn't use the instance name

  - by Max

  I have a web server with SQL express 2008 installed. I was trying to connect to this from my local machine using SSMS. After enabling TCP/IP in SQL configuration manager, starting SQL browser service and opening up the firewall I still couldn't connect using xxx.xxx.xxx.xxx\sqlexpress as the server name. Finally out of frustration I tried to connect taking off the sqlexpress instance name to just xxx.xxx.xxx.xxx and it worked! I'm really at a loss here as to why this works. What would happen if I installed more instances of SQL?

  Read the article

• Print server does not show up on router's attached devices

  - by AshTee

  Recently I bought a new more powerful wireless N router, DLink DIR 628. So I removed all connections from the previous router (Netgear WGT624) and connected them as they should be to the DLInk router. Everything works fine except for the print server. I have Hawking print server connected to HP Laserjet 6P parallel port printer. It works well with the Netgear router. But when I connect it to the DLInk router, it does not even show up in the LAN computers list. I am not sure what is going on. There is a utility called PSAdmin that can talk to the Hawking print server if I switch to Netgear router. With that utility, I can get the assigned IP address to the print server. But when switching to DLink router, even the PSAdmin fails to find the print server. I have been trying various things for last couple of days in vein. Please help.

  Read the article

• what causes drops in apache throughput?

  - by Robbie Mckennie

  i was poking around in the windows task manager, and i found this cool network throughput graphing thing. so i wanted to see it max out, so i started downloading a 1.8gb image (from the localhost to a remote system). but, much to my surprise, it looked like this: i count 16 dips, so i divided the 1.8gb into 16 and i got 115mb. then i looked up the mtu of ip, and i knew the mtu of ethernet from my reading, both far smaller than 115mb. and since tcp is connection orientated, it doesn't have an mtu.

  Read the article

• Understanding Asterisk Server features

  - by Arham Ali Qureshi

  I need to ask few question about Asterisk 1) Does ACL mean by Access Control list here ?If yes than how could i use it? >ip show user 6001 * Name : 6001 Secret : <Set> MD5Secret : <Not set> Context : DLPN_Admin Language : AMA flags : Unknown Transfer mode: open MaxCallBR : 384 kbps CallingPres : Presentation Allowed, Not Screened Call limit : 2147483647 Callgroup : 1 Pickupgroup : 1 Callerid : "test" <6001> ACL : No Sess-Timers : Accept Sess-Refresh : uas Sess-Expires : 1800 secs Sess-Min-SE : 90 secs RTP Engine : asterisk Codec Order : (ulaw:20,gsm:20) Auto-Framing: No 2) What is mean by "Require Call Token" in Asterisk Digium GIU on Create new User Panel 3) Is There any command from where i can get users VOICE MAIL password ? 4) What AMI or CLI command set call recording on or off for user ? and if i want that file to be stored on client computer not on server memory what could i do ?

  Read the article

• Exchange enrypted messages with a single recipient

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• How to convert laptop drive for use as VMware image?

  - by jnman

  I have a windows laptop that recently died (dead motherboard). It being a 7 year old laptop, I decided to give Apple a try this time around and try to use VMware to access my old data if necessary. In order to do this, I need to convert the physical drive to a VMware image. Googling around, it looks like I might be able to use VMware Convertor to do this. My original intent was to plug the laptop drive into a windows desktop via an external USB enclosure and create the image that way. However, upon further investigation, it looks like VMware Converter only supports converting a local machine (the desktop) or a remote machine (via IP) but not a laptop drive plugged into the local machine. So with that in mind, I'm looking for suggestions and help on how to convert this laptop drive into something I can use on my new Macbook Pro.

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• Windows Server 2003 Hacked - Files Being Uploaded

  - by jreedinc

  Blank directories are being created on my Windows Server 2003 virtual server with sub directories that are weird (for example: "88ÿ ÿ ÿÿþþ þþ13þ"). It looks like they are uploading bootlegged DVDs and pirated software. All of my bandwidth and file space is being eaten up. Could this be a shared permissions issue? Where should I look to further investigate this? My security permissions for the directory that is being hit are as followed: Administrators - ALL GRANTED IIS_WPG - Read & Execute, List Folder Contents, Read Internet Guest - DENY SYSTEM - ALL GRANTED Users - Read & Execute, List Folder Contents, Read My Event Viewer is showing many Logon/Logoff with NO IP?

  Read the article

• NFS denies mount, even though the client is listed in exports

  - by ajdecon

  We have a couple of servers (part of an HPC cluster) in which we're currently seeing some NFS behavior which is not making sense to me. node1 exports its /lscratch directory via NFS to node2, mounted at /scratch/node1. node2 also exports its own lscratch, which is correspondingly mounted at /scratch/node2 on node1. Unfortunately, whenever I attempt to mount either NFS export on the opposite node, I get the following error: mount: node1:/lscratch failed, reason given by server: Permission denied This despite the fact that I have included first the IP range (10.6.0.0) and then the specific IPs (10.6.7.1, 10.6.7.2) in /etc/exports. Any suggestions? Edit to remove ambiguity: I've made sure that exports only contains either the range, or the specific IPs, not both at the same time.

  Read the article

• Cisco router for educational purposes

  - by user39214

  Hey all. I want to buy a Cisco router to use on my home network. I'm just hoping to get a unit that is not too old and is not a SOHO model. I want to run the latest Cisco OS just to learn how Cisco does things. I would use it to divide my network into two or three IP networks, firewalling, etc. I'm just asking for a model name/number. Thanks.

  Read the article

• How to access website on localhost from internet?

  - by Nitesh Panchal

  Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

  Read the article

• Apache2: Trying to map a subdomain to a subdirectory

  - by user1561753

  So basically I want to have: sub.domain.com/anything - domain.com/asub/anything I'm a bit new to this and a bit confused. The first thing I did was configure my DNS settings so sub.domain.com goes to domain.com using a CNAME (would an A record and the IP be better?) Next I went into my VirtualHost file and have: RewriteEngine on RewriteCond %{HTTP_HOST} www.(.+) [NC] RewriteRule ^/(.*) http://domain.com/$1 [R] RewriteCond %{HTTP_HOST} ^sub.domain.com RewriteRule ^/(.*) http://domain.com/asub/$1 [R] So the first rule is meant to handle www. and making sure that is caught correctly and it works. The second rule is what I've added for the subdomain mapping and it doesn't seem to be doing anything

  Read the article

• Windows Server 2008 R2 DNS Server not working?

  - by wolfvilleian

  Hi, I have a server running Windows Server 2008 R2 hosting a DNS server, exchange 2010 and is a domain controller. One computer on the network (and domain) can ping the server 25% of the time, also when I try to ping it's own hostname it also does not work. However another computer that is on the domain can ping it fine, and another computer on the network but not domain can ping fine as well. The computer that cannot ping the server is setup to use the DNS server running on the server only (secondary dns points to nothing) and it will resolve the hostname of the server to the external IP not internal when the other two computers correctly resolve the internal All 3 computers and server are connected directly into the same switch. Does anyone have any ideas on how to fix this? Thanks

  Read the article

• Certain users cannot get to my server

  - by Zeno

  I am finding more and more users that report they cannot reach my server (website or services). Their tracert from that user looks like this: Tracing route to domain.com [*.*.*.255] over a maximum of 30 hops: 1 * * * Request timed out. The server is up and functional and every else reports it is fine. But there are various users who cannot get to it. I have no firewall or anything that would block anyone. Yes, the last part of the server IP is 255. Could this be causing it? http://www.dslreports.com/forum/r18539206-Last-octet-255-bug-on-Windows Or would a certain ISP be denying traffic to my server? Or something on their router level?

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• VPN using Zywall

  - by Rune FS

  I've played around with a certificate based VPN (normally I don't do hardware) we've manged to setup the connection and the tunnel between the routers is working correctly. We now need the last step. There's no connection to the computers on the other end. What could we have forgotten? (we're testing with two standard configured Win7 machines) EDIT: Just to clarify the tunnel is working I can ping the router on the other end. I can't access the computers on the other side of that router and vice versa. (It's also possible to access the remotemangement console of the remote router on the LAN IP)

  Read the article

• Apache can't connect to LDAP server

  - by jldugger

  I'm tying SVN to LDAPS by way of Apache. I've run openssl s_client --host $host --port 636 and received an SSL certificate, so it doesn't appear to be a firewall problem. I get the following warning: [Fri Apr 02 07:38:15 2010] [warn] [client <ip withheld>] [590] auth_ldap authenticate: user jldugger authentication failed; URI /internal-svn [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server] "Can't contact LDAP server" is somewhere between vague and wrong. I'm at a loss on how to continue debugging this. Ideas?

  Read the article

• Accessing my Rails webrick behind proxy?

  - by Eki Eqbal

  In my mackbook, when I try to connect to my rails application in office I can't , in the office there are some http proxy , and when I run my rails like this : sudo rails s -p8080 => Booting WEBrick => Rails 3.0.5 application starting in development on http://0.0.0.0:8080 => Call with -d to detach => Ctrl-C to shutdown server [2012-03-20 12:49:34] INFO WEBrick 1.3.1 [2012-03-20 12:49:34] INFO ruby 1.8.7 (2010-01-10) [universal-darwin11.0] [2012-03-20 12:49:34] INFO WEBrick::HTTPServer#start: pid=17439 port=8080 The local IP is : en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether f8:1e:df:d8:8c:25 inet6 fe80::fa1e:dfff:fed8:8c25%en1 prefixlen 64 scopeid 0x5 inet 10.21.21.240 netmask 0xffffff00 broadcast 10.21.21.255 media: autoselect status: active so when I try in the browser to trigger localhost:8080 or 10.21.21.240:8080 , it seems that I can't trigger my application as for the proxy check out the following : Any Ideas ?

  Read the article

• apache2 default namevirtualhost

  - by Zulakis

  I got a site server.com which I want to be returned when it is directly adressed using server.com or www.server.com but issue a 404 if the webserver gets accessed using its ip or another hostname. I got something like the following: NameVirtualhost 10.0.0.1:80 <VirtualHost 10.0.0.1:80> #This should be used if Host is server.com or www.server.com ServerName server.com ServerAlias server.com www.server.com DocumentRoot /var/www/ </VirtualHost> <VirtualHost 10.0.0.1:80> #This should be used alternatively RewriteEngine On RewriteRule (.*) - [R=404] </VirtualHost> How can I now set that the second entry should be used if hostname is not server.com or www.server.com?

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• router w/ WOL out-of-the-box, or is known to work with open firmware

  - by Jaroslav Záruba

  I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed to dd-wrt I'd prefer if the new one supported WOL out-of-the-box. other required features would be: dyndns service support port forwarding sometimes it is called "virtual server" I guess NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes) did I mention WiFi? preferably w/ some range extending technology, if such stuff works at all

  Read the article

< Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >