Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 315/538 | < Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >

• Pairing Bluetooth device with PIN fails

  - by Pikaro

  I'm trying to pair my old BlackBerry 8310 to my Linux desktop (up-to-date Debian Sid, 3.15-10.dmz.1-liquorix-amd64) by using blueman and its associated tools. Scanning for the device works equally well for both sides; however, I am unable to pair the two once it comes to entering the PIN. If I scan from my PC, I have two options in blueman-manager regarding my phone: Directly selecting "pair", or selecting "setup". If I select "pair", nothing happens on my desktop, but the phone asks me to enter a PIN; if I do so, it reports that pairing has failed. During that, nothing is logged to the console. Selecting "setup" opens a configuration dialog that allows for entering or generating a PIN. Regardless, I get to a screen that tells me to enter the PIN on the phone, and at the same time, the phone pops up the equivalent dialog. This would be what one would expect to work; but whatever I enter (naturally, the same on both), both devices report that pairing has failed, and blueman-manager logs init_services (/usr/lib/python2.7/dist-packages/blueman/main/Device.py:73) Loading services org.bluez.Error.AuthenticationFailed: Authentication Failed If I instead try to pair from the phone, I cannot see any kind of reaction from my desktop - all I get is the equivalent "pairing failed" message from the BlackBerry after I entered a PIN in the dialog that pops up there. hcitool scan and hciconfig -a work without complaints, but I cannot find a way to try the pairing as a whole on the console since bluez-simple-agent seems to have been discontinued and this recommendation is everywhere on Google. hcitool cc as root opens the PIN dialog on the phone, then fails with "Input/Output error" once I enter it. The user is not permitted to execute this command. I also tried creating /usr/lib/bluetooth/<MAC>/pincodes to manually define a persistent PIN, which seems to have had no effect. The same goes for running the different commands as root, though I'm really confused about the internal structure of the Bluetooth subsystem now: They usually and inconsistently failed with Python or DBUS errors or just showed the same results. The only other Bluetooth device I have around are a pair of Creative speakers. Trying "setup" asks me to enter a key on them, which is impossible. If I try "pair", I'm asked for a PIN as I should, but no pairing takes place, and no errors appear on the console. (It just repeats their name a few times.) Interestingly, I tried that before writing my question, and nothing happened in terms of PIN questions, just like with the BlackBerry, which still shows no change. I don't think I actively changed anything since then. The BlackBerry can pair with and connect to the speakers, and everything goes as one would expect, so the problem is definitely with my desktop. So thus my questions: What is that PIN window generated by, and why does it seem to appear randomly? How can I find out what, exactly, fails after trying to add the speakers, as this may give me a clue? Is there any kind of complete log that concerns itself with Bluetooth? What data can I provide to make this more solvable?

  Read the article

• Nginx Multiple Domains

  - by showFocus

  I am trying to add a second virtual host to nginx. When i go to the new domain it redirects to the old one. I have tried restarting Nginx, rebooting the server. Has anyone come across this before, care to share? File: nginx.conf ### user www-data www-data; worker_processes 4; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay off; keepalive_timeout 5; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /usr/local/nginx/sites-enabled/*; } File: ../sites-enabled/domain1.co.uk server { listen 80; server_name www.domain1.co.uk; rewrite ^/(.*) http://domain1.co.uk/$1 permanent; } server { listen 80; server_name domain1.co.uk; access_log /home/me/public_html/domain1.co.uk/log/access.log; error_log /home/me/public_html/domain1.co.uk/log/error.log; location / { root /home/me/public_html/domain1.co.uk/public/; index index.php index.html; # WordPress supercache & permalinks. include /usr/local/nginx/conf/wordpress_params.super_cache; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/me/public_html/domain1.co.uk/public/$fastcgi_script_name; } } File: ../sites-enabled/domain2.co.uk server { listen 80; server_name www.domain2.co.uk; rewrite ^/(.*) http://domain2.co.uk/$1 permanent; } server { listen 80; server_name domain2.co.uk; access_log /home/me/public_html/domain2.co.uk/log/access.log; error_log /home/me/public_html/domain2.co.uk/log/error.log; location / { root /home/me/public_html/domain2.co.uk/public/; index index.php index.html; # Basic version of WordPress parameters, supporting nice permalinks. # include /usr/local/nginx/conf/wordpress_params.regular; # Advanced version of WordPress parameters supporting nice permalinks and WP Super Cache plugin include /usr/local/nginx/conf/wordpress_params.super_cache; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /home/me/public_html/domain2/public/$fastcgi_script_name; } }

  Read the article

• website connection reset on first load

  - by Tar

  i'm using nginx with php-cgi. lately a problem has arose where if you don't view my site for a while, like 3-4 minutes, and then open it again, the first request you send will return connection reset by peer in the browser. if you refresh, operation is normal for all subsequent requests. this happens every time and it isn't just an isolated incident, it happens to everyone using my site. i've tried to restart nginx and php-cgi but to no avail. does anyone know what the problem could be? i can provide whatever information necessary. it's worth noting that there's nothing in error log besides that message about client closing the connection early. nginx.conf user nobody; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 2048; } http { include /etc/nginx/mime.types; error_page 404 /404.html; error_page 403 /403.html; error_page 444 /444.html; error_page 502 /502.html; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; large_client_header_buffers 8 8k; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 30; server_tokens off; gzip on; gzip_proxied any; gzip_comp_level 6; gzip_buffers 64 8k; gzip_min_length 1024; gzip_http_version 1.1; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; include /etc/nginx/conf.d/*.conf; } default.conf server { listen 80; server_name domain.com; error_log /var/log/nginx/error.log debug; access_log /var/log/nginx/access.log; location / { if ($request_method !~ ^(GET|HEAD|POST)$ ) { return 444; } if ($http_user_agent ~* Havij|hvj|acunetix|wget|HTtrack) { return 403; } root /home/admin06/public_html; autoindex off; index index.php; # Images and static content is treated different location ~* ^.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /home/admin06/public_html; } location /nginx_status { stub_status on; access_log off;] deny all; } location ~ \.php$ { fastcgi_split_path_info ^(.+\.php)(/.*)$; #try_files $uri =404; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/site/public_html$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 60; fastcgi_read_timeout 60; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; } ## Disable viewing .htaccess & .htpassword location ~ /\.ht { deny all; } location ~ error_log { deny all; } location ~ access_log { deny all; } location ~ \.cgi { deny all; } location ~ \.db { deny all; } }

  Read the article

• dns server bind is not work [closed]

  - by user1742080

  I just installed bind on RHEL 6 and point a domain to that server. but actually when i ping domain it returns error 1214: Here is my named.conf: // // named.conf // // Provided by Red Hat bind package to configure the ISC BIND named(8) DNS // server as a caching only nameserver (as a localhost DNS resolver only). // // See /usr/share/doc/bind*/sample/ for example named configuration files. // options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query { any; }; recursion yes; dnssec-enable yes; dnssec-validation yes; dnssec-lookaside auto; /* Path to ISC DLV key */ bindkeys-file "/etc/named.iscdlv.key"; managed-keys-directory "/var/named/dynamic"; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; zone "." IN { type hint; file "named.ca"; }; include "/etc/named.rfc1912.zones"; include "/etc/named.root.key"; zone "mydomain.com"{ type master; file "/var/named/data/named.mydomain.com"; allow-update { none; }; }; AND The content of "/var/named/data/named.mydomain.com": 1 $TTL 38400 2 3 mydomain.com. IN SOA ns1.mydomain.com. milad.yahoo.com. ( 4 2012101201 ; serial number YYMMDDNN 5 28800 ; Refresh 6 7200 ; Retry 7 864000 ; Expire 8 38400 ; Min TTL 9 ) 10 11 mydomain.com. IN A 1.2.3.4 12 www IN A 1.2.3.4 13 ns1.mydomain.com. IN A 1.2.3.4 14 ns2.mydomain.com. IN A 1.2.3.4 15 mydomain.com. IN NS ns1.mydomain.com. 16 mydomain.com. IN NS ns2.mydomain.com. AND i'm sure the named service is running: [root@server ~]# service named status version: 9.8.2rc1-RedHat-9.8.2-0.10.rc1.el6_3.3 CPUs found: 8 worker threads: 8 number of zones: 20 debug level: 0 xfers running: 0 xfers deferred: 0 soa queries in progress: 0 query logging is OFF recursive clients: 0/0/1000 tcp clients: 0/100 server is up and running named (pid 26299) is running...

  Read the article

• Is this valid JFS partition?

  - by Coolmax

  This is my first question on StackExchange. My teacher gave my his laptop (with Fedora 16 on it) and compact flash card with data. He want to have access to files on card, but he couldn't get access to it. The problem is Linux don't know what type of partion is. I suppose there is JFS: root@debian:~# dmesg |grep sdc [ 9066.908223] sd 3:0:0:1: [sdc] 3940272 512-byte logical blocks: (2.01 GB/1.87 GiB) [ 9066.962307] sd 3:0:0:1: [sdc] Write Protect is off [ 9066.962310] sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00 [ 9066.962312] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028420] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.028637] sdc: unknown partition table [ 9067.097065] sd 3:0:0:1: [sdc] Assuming drive cache: write through [ 9067.097281] sd 3:0:0:1: [sdc] Attached SCSI removable disk and some of data: root@debian:~# hexdump -Cn 65536 /dev/sdc 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00008000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 00008010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 00008020 00 20 00 00 00 09 20 10 02 00 00 00 00 00 00 00 |. .... .........| 00008030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 00008040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 00008050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 00008060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 00008070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00008080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 00008090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 000080a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 000080b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000080c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * [cut] * 0000f000 4a 46 53 31 01 00 00 00 48 63 0e 00 00 00 00 00 |JFS1....Hc......| 0000f010 00 10 00 00 0c 00 03 00 00 02 00 00 09 00 00 00 |................| 0000f020 00 20 00 00 00 09 20 10 00 00 00 00 00 00 00 00 |. .... .........| 0000f030 04 00 00 00 26 00 00 00 02 00 00 00 24 00 00 00 |....&.......$...| 0000f040 41 03 00 00 16 00 00 00 00 02 00 00 a0 cc 01 00 |A...............| 0000f050 37 00 00 00 69 cc 01 00 b6 d8 ac 4b 00 00 00 00 |7...i......K....| 0000f060 32 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 |2...............| 0000f070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f080 00 00 00 00 00 00 00 00 90 15 e5 5f e3 c4 45 fa |..........._..E.| 0000f090 9d 6a 5c b5 4f da 62 1a 00 00 00 00 00 00 00 00 |.j\.O.b.........| 0000f0a0 00 00 00 00 00 00 00 00 c3 c9 01 00 ed 81 00 00 |................| 0000f0b0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0000f0c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00010000 I'm total newbie to filesystems. I googled and found that JFS superblock may starts on 0x8000 offset. But what next? How to mount this card? If there would be normal partition table I would expect 55 AA on 510th and 511th byte, but first 8000 bytes are clear. Any help would be greatly appreciated. And sorry for my bad english :) Kind regards.

  Read the article

• How do I allow mysqld to use more than 24.9% of my cpu?

  - by Joseph Yancey

  I have a Web server running on RHEL that is running Apache and MySQL. It has a Quad core 3.2Ghz Xeon CPU and 8 Gigs of RAM Most of the time, we don't have any issues at all. Our web application is very database intensive. When our usage gets pretty heavy MySQL will peg out at using 24.9% of the cpu. Most of the time, it hangs around below 5%. I have speculated that it is only using one core of the CPU and it is pegging out that core but TOP shows me in the cpu column that mysqld changes cores even while the usage stays at 24.9%. When it does this MySQL gets painfully slow as it is queuing up queries Is there some magic configuration that will tell mysql to use more cpu when it needs to? Also, any other advice on my configuration would be helpful. We run two applications on this server. One that runs Innodb but doesn't get much usage (it has been replaced by the other app), and one that runs MyIsam and gets lots of use. Overall, our whole mysql data directory is something like 13Gigs if that matters at all. Here is my config: [root@ProductionLinux root]# cat /etc/my.cnf [mysqld] server-id = 71 log-bin = /var/log/mysql/mysql-bin.log binlog-do-db = oldapplication binlog-do-db = newapplication binlog-do-db = support thread_cache_size = 30 key_buffer_size = 256M table_cache = 256 sort_buffer_size = 4M read_buffer_size = 1M skip-name-resolve innodb_data_home_dir = /usr/local/mysql/data/ innodb_data_file_path = InnoDB:100M:autoextend set-variable = innodb_buffer_pool_size=70M set-variable = innodb_additional_mem_pool_size=10M set-variable = max_connections=500 innodb_log_group_home_dir = /usr/local/mysql/data innodb_log_arch_dir = /usr/local/mysql/data set-variable = innodb_log_file_size=20M set-variable = innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit = 1 log-queries-not-using-indexes log-error = /var/log/mysql/mysql-error.log mysql show variables; +---------------------------------+-----------------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+-----------------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 5 | | datadir | /usr/local/mysql/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | NO | | have_compress | YES | | have_crypt | YES | | have_csv | NO | | have_example_engine | NO | | have_federated_engine | NO | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_ndbcluster | NO | | have_openssl | NO | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 10485760 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 73400320 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | InnoDB:100M:autoextend | | innodb_data_home_dir | /usr/local/mysql/data/ | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | OFF | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | /usr/local/mysql/data | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 20971520 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | /usr/local/mysql/data | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 20 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 28800 | | join_buffer_size | 131072 | | key_buffer_size | 268435456 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | ON | | log_bin_trust_function_creators | OFF | | log_error | /var/log/mysql/mysql-error.log | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 0 | | max_allowed_packet | 1048576 | | max_binlog_cache_size | 18446744073709551615 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 500 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 16777216 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_relay_log_size | 0 | | max_seeks_for_key | 18446744073709551615 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 18446744073709551615 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 9223372036854775807 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 2510 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /usr/local/mysql/data/ProductionLinux.pid | | port | 3306 | | preload_buffer_size | 32768 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 2048 | | read_buffer_size | 1044480 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | server_id | 71 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql.sock | | sort_buffer_size | 4194296 | | sql_mode | | | sql_notes | ON | | sql_warnings | ON | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | sync_replication | 0 | | sync_replication_slave_id | 0 | | sync_replication_timeout | 10 | | system_time_zone | CST | | table_cache | 256 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 30 | | thread_stack | 262144 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.18-standard-log | | version_comment | MySQL Community Edition - Standard (GPL) | | version_compile_machine | x86_64 | | version_compile_os | unknown-linux-gnu | | wait_timeout | 28800 | +---------------------------------+-----------------------------------------------------------------------------+ 210 rows in set (0.00 sec)

  Read the article

• Can not open port 3306 on Ubuntu using iptables

  - by user94626

  I am trying to open port 3306 (for remote mysql connections) on my ubuntu 12.04 server machine but for the life of me can't get the damned thing to work! Here is what I did: 1) list current firewall rules: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 225 16984 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 220 69605 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 486 54824 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 4 208 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 4 208 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 735 182K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 225 16984 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 2) try to connect from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect 3) try to add a new rule to iptables: iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT 4) make sure the new rule is added: $> sudo iptables -nL -v output: Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 359 25972 fail2ban-ssh tcp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 22 251 78665 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- lo * 0.0.0.0/0 127.0.0.0/8 reject-with icmp-port-unreachable 628 64420 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 1 60 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 19 988 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 8 5 260 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 5/min burst 5 LOG flags 0 level 7 prefix "iptables denied: " 5 260 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 0 0 ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 919 213K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (1 references) pkts bytes target prot opt in out source destination 359 25972 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 which appears to be the case (last line in "Chain INPUT" section). 5) try to connect again from remote machine: $> mysql -u root -p -h x.x.x.x output: timeout.... failed to connect which is failing again. 6) try to flush all rules: $> sudo iptables -F 7) this time I CAN CONNECT. 8) reboot server and try to connect, FAILURE. I suspect since the new rule is being appended at the end it will have no effect as there appears to be a "reject all" sort of rule before it. If this is the case, how to make sure the new rule is added in the right order? Otherwise, what am I missing? Please help.

  Read the article

• how to install 'version.h' in ubuntu ?

  - by user252098

  Just now , I try to install the Jungo WinDriver in the Ubuntu 13.10 . But I am puzzled by the its manual of how to Install version.h : Install version.h: The file version.h is created when you first compile the Linux kernel source code. Some distributions provide a compiled kernel without the file version.h. Look under /usr/src/linux/include/linux to see whether you have this file. If you do not, follow these steps: Become super user: $ su Change directory to the Linux source directory: # cd /usr/src/linux Type: # make xconfig Save the configuration by choosing Save and Exit. Type: # make dep Exit super user mode: # exit But the shell says: warning: make dep is unnecessary now. Then, I found out there is a version.h in /usr/src/linux-headers-3.11.0.12-generic, so I type: /usr/src/windriver/redist# ./configure --with-kernel-source=/usr/src/linux-headers-3.11.0.12-generic But, the windriver run fails: USE_KBUILD = yes checking for cpu architecture... x86_64 checking for WinDriver root directory... /usr/src/WinDriver checking for linux kernel source... found at /usr/src/linux checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -s /usr/lib /usr/lib64; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so checking which directories to include... -I/usr/src/linux/include checking linux kernel version... 3.11.10.6 checking for modules installation directory... /lib/modules/3.11.0-12-generic/kernel/drivers/misc checking output directory... LINUX.3.11.0-12-generic.x86_64 checking target... LINUX.3.11.0-12-generic.x86_64/windrvr6_usb.ko checking for regparm kernel option... find: `/usr/src/WinDriver/redist/.tmp_driver/.tmp_versions': No such file or directory 0 checking for modpost location... /usr/src/linux/scripts/mod/modpost configure.usb: creating ./config.status config.status: creating makefile.usb.kbuild checking for cpu architecture... x86_64 checking for WinDriver root directory... /usr/src/WinDriver checking for linux kernel source... found at /usr/src/linux checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -s /usr/lib /usr/lib64; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so checking which directories to include... -I/usr/src/linux/include checking linux kernel version... 3.11.10.6 checking for modules installation directory... /lib/modules/3.11.0-12-generic/kernel/drivers/misc checking output directory... LINUX.3.11.0-12-generic.x86_64 checking target... LINUX.3.11.0-12-generic.x86_64/windrvr6.ko checking for regparm kernel option... find: `/usr/src/WinDriver/redist/.tmp_driver/.tmp_versions': No such file or directory 0 checking for right linked object... windrvr_gcc_v3.a checking for modpost location... /usr/src/linux/scripts/mod/modpost configure.wd: creating ./config.status config.status: creating makefile.wd.kbuild What is the problem?

  Read the article

• Error on 64 Bit Install of IIS &ndash; LoadLibraryEx failed on aspnet_filter.dll

  - by Rick Strahl

  I’ve been having a few problems with my Windows 7 install and trying to get IIS applications to run properly in 64 bit. After installing IIS and creating virtual directories for several of my applications and firing them up I was left with the following error message from IIS: Calling LoadLibraryEx on ISAPI filter “c:\windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll” failed This is on Windows 7 64 bit and running on an ASP.NET 4.0 Application configured for running 64 bit (32 bit disabled). It’s also on what is essentially a brand new installation of IIS and Windows 7. So it failed right out of the box. The problem here is that IIS is trying to loading this ISAPI filter from the 32 bit folder – it should be loading from Framework64 folder note the Framework folder. The aspnet_filter.dll component is a small Win32 ISAPI filter used to back up the cookieless session state for ASP.NET on IIS 7 applications. It’s not terribly important because of this focus, but it’s a default loaded component. After a lot of fiddling I ended up with two solutions (with the help and support of some Twitter folks): Switch IIS to run in 32 bit mode Fix the filter listing in ApplicationHost.config Switching IIS to allow 32 Bit Code This is a quick fix for the problem above which enables 32 bit code in the Application Pool. The problem above is that IIS is trying to load a 32 bit ISAPI filter and enabling 32 bit code gets you around this problem. To configure your Application Pool, open the Application Pool in IIS Manager bring up Advanced Options and Enable 32 Bit Applications: And voila the error message above goes away. Fix Filters Enabling 32 bit code is a quick fix solution to this problem, but not an ideal one. If you’re running a pure .NET application that doesn’t need to do COM or pInvoke Interop with 32 bit apps there’s usually no need for enabling 32 bit code in an Application Pool as you can run in native 64 bit code. So trying to get 64 bit working natively is a pretty key feature in my opinion :-) So what’s the problem – why is IIS trying to load a 32 bit DLL in a 64 bit install, especially if the application pool is configured to not allow 32 bit code at all? The problem lies in the server configuration and the fact that 32 bit and 64 bit configuration settings exist side by side in IIS. If I open my Default Web Site (or any other root Web Site) and go to the ISAPI filter list here’s what I see: Notice that there are 3 entries for ASP.NET 4.0 in this list. Only two of them however are specifically scoped to the specifically to 32 bit or 64 bit. As you can see the 64 bit filter correctly points at the Framework64 folder to load the dll, while both the 32 bit and the ‘generic’ entry point at the plain Framework 32 bit folder. Aha! Hence lies our problem. You can edit ApplicationHost.config manually, but I ran into the nasty issue of not being able to easily edit that file with the 32 bit editor (who ever thought that was a good idea???? WTF). You have to open ApplicationHost.Config in a 64 bit native text editor – which Visual Studio is not. Or my favorite editor: EditPad Pro. Since I don’t have a native 64 bit editor handy Notepad was my only choice. Or as an alternative you can use the IIS 7.5 Configuration Editor which lets you interactively browse and edit most ApplicationHost settings. You can drill into the configuration hierarchy visually to find your keys and edit attributes and sub values in property editor type interface. I had no idea this tool existed prior to today and it’s pretty cool as it gives you some visual clues to options available – especially in absence of an Intellisense scheme you’d get in Visual Studio (which doesn’t work). To use the Configuration Editor go the Web Site root and use the Configuration Editor option in the Management Group. Drill into System.webServer/isapiFilters and then click on the Collection’s … button on the right. You should now see a display like this: which shows all the same attributes you’d see in ApplicationHost.config (cool!). These entries correspond to these raw ApplicationHost.config entries: <filter name="ASP.Net_4.0" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0" /> <filter name="ASP.Net_4.0_64bit" path="C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness64" /> <filter name="ASP.Net_4.0_32bit" path="C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_filter.dll" enableCache="true" preCondition="runtimeVersionv4.0,bitness32" /> The key attribute we’re concerned with here is the preCondition and the bitness subvalue. Notice that the ‘generic’ version – which comes first in the filter list – has no bitness assigned to it, so it defaults to 32 bit and the 32 bit dll path. And this is where our problem comes from. The simple solution to fix the startup problem is to remove the generic entry from this list here or in the filters list shown earlier and leave only the bitness specific versions active. The preCondition attribute acts as a filter and as you can see here it filters the list by runtime version and bitness value. This is something to keep an eye out in general – if a bitness values are missing it’s easy to run into conflicts like this with any settings that are global and especially those that load modules and handlers and other executable code. On 64 bit systems it’s a good idea to explicitly set the bitness of all entries or remove the non-specific versions and add bit specific entries. So how did this get misconfigured? I installed IIS before everything else was installed on this machine and then went ahead and installed Visual Studio. I suspect the Visual Studio install munged this up as I never saw a similar problem on my live server where everything just worked right out of the box. In searching about this problem a lot of solutions pointed at using aspnet_regiis –r from the Framework64 directory, but that did not fix this extra entry in the filters list – it adds the required 32 bit and 64 bit entries, but it doesn’t remove the errand un-bitness set entry. Hopefully this post will help out anybody who runs into a similar situation without having to trouble shoot all the way down into the configuration settings and noticing the bitness settings. It’s a good lesson learned for me – this is my first desktop install of a 64 bit OS and things like this are what I was reluctant to find. Now that I ran into this I have a good idea what to look for with 32/64 bit misconfigurations in IIS at least.© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

  Read the article

• Visual Studio 2013, ASP.NET MVC 5 Scaffolded Controls, and Bootstrap

  - by plitwin

  A few days ago, I created an ASP.NET MVC 5 project in the brand new Visual Studio 2013. I added some model classes and then proceeded to scaffold a controller class and views using the Entity Framework. Scaffolding Some Views Visual Studio 2013, by default, uses the Bootstrap 3 responsive CSS framework. Great; after all, we all want our web sites to be responsive and work well on mobile devices. Here’s an example of a scaffolded Create view as shown in Google Chrome browser   Looks pretty good. Okay, so let’s increase the width of the Title, Description, Address, and Date/Time textboxes. And decrease the width of the  State and MaxActors textbox controls. Can’t be that hard… Digging Into the Code Let’s take a look at the scaffolded Create.cshtml file. Here’s a snippet of code behind the Create view. Pretty simple stuff. @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>RandomAct</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Title) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.EditorFor(model => model.Description) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } A little more digging and I discover that there are three CSS files of importance in how the page is rendered: boostrap.css (and its minimized cohort) and site.css as shown below.   The Root of the Problem And here’s the root of the problem which you’ll find the following CSS in Site.css: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 280px; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Yes, Microsoft is for some reason setting the maximum width of all input, select, and textarea controls to 280 pixels. Not sure the motivation behind this, but until you change this or overrride this by assigning the form controls to some other CSS class, your controls will never be able to be wider than 280px. The Fix Okay, so here’s the deal: I hope to become very competent in all things Bootstrap in the near future, but I don’t think you should have to become a Bootstrap guru in order to modify some scaffolded control widths. And you don’t. Here is the solution I came up with: Find the aforementioned CSS code in SIte.css and change it to something more tenable. Such as: /* Set width on the form input elements since they're 100% wide by default */ input, select, textarea { max-width: 600px; } Because the @Html.EditorFor html helper doesn’t support the passing of HTML attributes, you will need to repalce any @Html.EditorFor() helpers with @Html.TextboxFor(), @Html.TextAreaFor, @Html.CheckBoxFor, etc. helpers, and then add a custom width attribute to each control you wish to modify. Thus, the earlier stretch of code might end up looking like this: @using (Html.BeginForm()) { @Html.AntiForgeryToken() <div class="form-horizontal"> <h4>Random Act</h4> <hr /> @Html.ValidationSummary(true) <div class="form-group"> @Html.LabelFor(model => model.Title, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextBoxFor(model => model.Title, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Title) </div> </div> <div class="form-group"> @Html.LabelFor(model => model.Description, new { @class = "control-label col-md-2" }) <div class="col-md-10"> @Html.TextAreaFor(model => model.Description, new { style = "width: 400px" }) @Html.ValidationMessageFor(model => model.Description) </div> </div> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Resulting Form Here’s what the page looks like after the fix: Technorati Tags: ASP.NET MVC,ASP.NET MVC 5,Bootstrap

  Read the article

• Preserving Permalinks

  - by Daniel Moth

  One of the things that gets me on a rant is websites that break permalinks. If you have posted something somewhere and there is a public URL pointing to it, that URL should never ever return a 404. You are breaking all websites that ever linked to you and you are breaking all search engine links to your content (that others will try and follow). It is a pet peeve of mine. So when I had to move my blog, obviously I would preserve the root URL (www.danielmoth.com/Blog/), but I also wanted to preserve every URL my blog has generated over the years. To be clear, our focus here is on the URL formatting, not the content migration which I'll talk about in my next post. In this post, I'll describe my solution first and then what it solves. 1. The IIS7 Rewrite Module and web.config There are a few ways you can map an old URL to a new one (so when requests to the old URL come in, they get redirected to the new one). The new blog engine I use (dasBlog) has built-in functionality to do that (Scott refers to it here). Instead, the way I chose to address the issue was to use the IIS7 rewrite module. The IIS7 rewrite module allows redirecting URLs based on pattern matching, regular expressions and, of course, hardcoded full URLs for things that don't fall into any pattern. You can configure it visually from IIS Manager using a handy dialog that allows testing patterns against input URLs. Here is what mine looked like after configuring a few rules: To learn more about this technology check out this video, the reference page and this overview blog post; all 3 pages have a collection of related resources at the bottom worth checking out too. All the visual configuration ends up in a web.config file at the root folder of your website. If you are on a shared hosting service, probably the only way you can use the Rewrite Module is by directly editing the web.config file. Next, I'll describe the URLs I had to map and how that manifested itself in the web.config file. What I did was create the rules locally using the GUI, and then took the generated web.config file and uploaded it to my live site. You can view my web.config here. 2. Monthly Archives Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004_07_01_mothblog_archive.html dasBlog: /Blog/default,month,2004-07.aspx In my web.config file, the rule that deals with this is the one named "monthlyarchive_redirect". 3. Categories Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/labels/Personal.html dasBlog: /Blog/CategoryView,category,Personal.aspx In my web.config file the rule that deals with this is the one named "category_redirect". 4. Posts Observe the difference between the way the two blog engines generate this type of URL Blogger: /Blog/2004/07/hello-world.html dasBlog: /Blog/Hello-World.aspx In my web.config file the rule that deals with this is the one named "post_redirect". Note: The decision is taken to use dasBlog URLs that do not include the date info (see the description of my Appearance settings). If we included the date info then it would have to include the day part, which blogger did not generate. This makes it impossible to redirect correctly and to have a single permalink for blog posts moving forward. An implication of this decision, is that no two blog posts can have the same title. The tool I will describe in my next post (inelegantly) deals with duplicates, but not with triplicates or higher. 5. Unhandled by a generic rule Unfortunately, the two blog engines use different rules for generating URLs for blog posts. Most of the time the conversion is as simple as the example of the previous section where a post titled "Hello World" generates a URL with the words separated by a hyphen. Some times that is not the case, for example: /Blog/2006/05/medc-wrap-up.html /Blog/MEDC-Wrapup.aspx or /Blog/2005/01/best-of-moth-2004.html /Blog/Best-Of-The-Moth-2004.aspx or /Blog/2004/11/more-windows-mobile-2005-details.html /Blog/More-Windows-Mobile-2005-Details-Emerge.aspx In short, blogger does not add words to the title beyond ~39 characters, it drops some words from the title generation (e.g. a, an, on, the), and it preserve hyphens that appear in the title. For this reason, we need to detect these and explicitly list them for redirects (no regular expression can help here because the full set of rules is not listed anywhere). In my web.config file the rule that deals with this is the one named "Redirect rule1 for FullRedirects" combined with the rewriteMap named "StaticRedirects". Note: The tool I describe in my next post will detect all the URLs that need to be explicitly redirected and will list them in a file ready for you to copy them to your web.config rewriteMap. 6. C# code doing the same as the web.config I wrote some naive code that does the same thing as the web.config: given a string it will return a new string converted according to the 3 rules above. It does not take into account the 4th case where an explicit hard-coded conversion is needed (the tool I present in the next post does take that into account). static string REGEX_post_redirect = "[0-9]{4}/[0-9]{2}/([0-9a-z-]+).html"; static string REGEX_category_redirect = "labels/([_0-9a-z-% ]+).html"; static string REGEX_monthlyarchive_redirect = "([0-9]{4})_([0-9]{2})_[0-9]{2}_mothblog_archive.html"; static string Redirect(string oldUrl) { GroupCollection g; if (RunRegExOnIt(oldUrl, REGEX_post_redirect, 2, out g)) return string.Concat(g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_category_redirect, 2, out g)) return string.Concat("CategoryView,category,", g[1].Value, ".aspx"); if (RunRegExOnIt(oldUrl, REGEX_monthlyarchive_redirect, 3, out g)) return string.Concat("default,month,", g[1].Value, "-", g[2], ".aspx"); return string.Empty; } static bool RunRegExOnIt(string toRegEx, string pattern, int groupCount, out GroupCollection g) { if (pattern.Length == 0) { g = null; return false; } g = new Regex(pattern, RegexOptions.IgnoreCase | RegexOptions.Compiled).Match(toRegEx).Groups; return (g.Count == groupCount); } Comments about this post welcome at the original blog.

  Read the article

• Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CD

  - by Trevor Bekolay

  Accidentally deleting a file is a terrible feeling. Not being able to boot into Windows and undelete that file makes that even worse. Fortunately, you can recover deleted files on NTFS hard drives from an Ubuntu Live CD. To show this process, we created four files on the desktop of a Windows XP machine, and then deleted them. We then booted up the same machine with the bootable Ubuntu 9.10 USB Flash Drive that we created last week. Once Ubuntu 9.10 boots up, open a terminal by clicking Applications in the top left of the screen, and then selecting Accessories > Terminal. To undelete our files, we first need to identify the hard drive that we want to undelete from. In the terminal window, type in: sudo fdisk –l and press enter. What you’re looking for is a line that ends with HPSF/NTFS (under the heading System). In our case, the device is “/dev/sda1”. This may be slightly different for you, but it will still begin with /dev/. Note this device name. If you have more than one hard drive partition formatted as NTFS, then you may be able to identify the correct partition by the size. If you look at the second line of text in the screenshot above, it reads “Disk /dev/sda: 136.4 GB, …” This means that the hard drive that Ubuntu has named /dev/sda is 136.4 GB large. If your hard drives are of different size, then this information can help you track down the right device name to use. Alternatively, you can just try them all, though this can be time consuming for large hard drives. Now that you know the name Ubuntu has assigned to your hard drive, we’ll scan it to see what files we can uncover. In the terminal window, type: sudo ntfsundelete <HD name> and hit enter. In our case, the command is: sudo ntfsundelete /dev/sda1 The names of files that can recovered show up in the far right column. The percentage in the third column tells us how much of that file can be recovered. Three of the four files that we originally deleted are showing up in this list, even though we shut down the computer right after deleting the four files – so even in ideal cases, your files may not be recoverable. Nevertheless, we have three files that we can recover – two JPGs and an MPG. Note: ntfsundelete is immediately available in the Ubuntu 9.10 Live CD. If you are in a different version of Ubuntu, or for some other reason get an error when trying to use ntfsundelete, you can install it by entering “sudo apt-get install ntfsprogs” in a terminal window. To quickly recover the two JPGs, we will use the * wildcard to recover all of the files that end with .jpg. In the terminal window, enter sudo ntfsundelete <HD name> –u –m *.jpg which is, in our case, sudo ntfsundelete /dev/sda1 –u –m *.jpg The two files are recovered from the NTFS hard drive and saved in the current working directory of the terminal. By default, this is the home directory of the current user, though we are working in the Desktop folder. Note that the ntfsundelete program does not make any changes to the original NTFS hard drive. If you want to take those files and put them back in the NTFS hard drive, you will have to move them there after they are undeleted with ntfsundelete. Of course, you can also put them on your flash drive or open Firefox and email them to yourself – the sky’s the limit! We have one more file to undelete – our MPG. Note the first column on the far left. It contains a number, its Inode. Think of this as the file’s unique identifier. Note this number. To undelete a file by its Inode, enter the following in the terminal: sudo ntfsundelete <HD name> –u –i <Inode> In our case, this is: sudo ntfsundelete /dev/sda1 –u –i 14159 This recovers the file, along with an identifier that we don’t really care about. All three of our recoverable files are now recovered. However, Ubuntu lets us know visually that we can’t use these files yet. That’s because the ntfsundelete program saves the files as the “root” user, not the “ubuntu” user. We can verify this by typing the following in our terminal window: ls –l We want these three files to be owned by ubuntu, not root. To do this, enter the following in the terminal window: sudo chown ubuntu <Files> If the current folder has other files in it, you may not want to change their owner to ubuntu. However, in our case, we only have these three files in this folder, so we will use the * wildcard to change the owner of all three files. sudo chown ubuntu * The files now look normal, and we can do whatever we want with them. Hopefully you won’t need to use this tip, but if you do, ntfsundelete is a nice command-line utility. It doesn’t have a fancy GUI like many of the similar Windows programs, but it is a powerful tool that can recover your files quickly. See ntfsundelete’s manual page for more detailed usage information Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDUse Ubuntu Live CD to Backup Files from Your Dead Windows ComputerCreate a Bootable Ubuntu 9.10 USB Flash DriveCreate a Bootable Ubuntu USB Flash Drive the Easy WayGuide to Using Check Disk in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• Tricks and Optimizations for you Sitecore website

  - by amaniar

  When working with Sitecore there are some optimizations/configurations I usually repeat in order to make my app production ready. Following is a small list I have compiled from experience, Sitecore documentation, communicating with Sitecore Engineers etc. This is not supposed to be technically complete and might not be fit for all environments.   Simple configurations that can make a difference: 1) Configure Sitecore Caches. This is the most straight forward and sure way of increasing the performance of your website. Data and item cache sizes (/databases/database/ [id=web] ) should be configured as needed. You may start with a smaller number and tune them as needed. <cacheSizes hint="setting"> <data>300MB</data> <items>300MB</items> <paths>5MB</paths> <standardValues>5MB</standardValues> </cacheSizes> Tune the html, registry etc cache sizes for your website.   <cacheSizes> <sites> <website> <html>300MB</html> <registry>1MB</registry> <viewState>10MB</viewState> <xsl>5MB</xsl> </website> </sites> </cacheSizes> Tune the prefetch cache settings under the App_Config/Prefetch/ folder. Sample /App_Config/Prefetch/Web.Config: <configuration> <cacheSize>300MB</cacheSize> <!--preload items that use this template--> <template desc="mytemplate">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</template> <!--preload this item--> <item desc="myitem">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }</item> <!--preload children of this item--> <children desc="childitems">{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}</children> </configuration> Break your page into sublayouts so you may cache most of them. Read the caching configuration reference: http://sdn.sitecore.net/upload/sitecore6/sc62keywords/cache_configuration_reference_a4.pdf   2) Disable Analytics for the Shell Site <site name="shell" virtualFolder="/sitecore/shell" physicalFolder="/sitecore/shell" rootPath="/sitecore/content" startItem="/home" language="en" database="core" domain="sitecore" loginPage="/sitecore/login" content="master" contentStartItem="/Home" enableWorkflow="true" enableAnalytics="false" xmlControlPage="/sitecore/shell/default.aspx" browserTitle="Sitecore" htmlCacheSize="2MB" registryCacheSize="3MB" viewStateCacheSize="200KB" xslCacheSize="5MB" />   3) Increase the Check Interval for the MemoryMonitorHook so it doesn’t run every 5 seconds (default). <hook type="Sitecore.Diagnostics.MemoryMonitorHook, Sitecore.Kernel"> <param desc="Threshold">800MB</param> <param desc="Check interval">00:05:00</param> <param desc="Minimum time between log entries">00:01:00</param> <ClearCaches>false</ClearCaches> <GarbageCollect>false</GarbageCollect> <AdjustLoadFactor>false</AdjustLoadFactor> </hook>   4) Set Analytics.PeformLookup (Sitecore.Analytics.config) to false if your environment doesn’t have access to the internet or you don’t intend to use reverse DNS lookup. <setting name="Analytics.PerformLookup" value="false" />   5) Set the value of the “Media.MediaLinkPrefix” setting to “-/media”: <setting name="Media.MediaLinkPrefix" value="-/media" /> Add the following line to the customHandlers section: <customHandlers> <handler trigger="-/media/" handler="sitecore_media.ashx" /> <handler trigger="~/media/" handler="sitecore_media.ashx" /> <handler trigger="~/api/" handler="sitecore_api.ashx" /> <handler trigger="~/xaml/" handler="sitecore_xaml.ashx" /> <handler trigger="~/icon/" handler="sitecore_icon.ashx" /> <handler trigger="~/feed/" handler="sitecore_feed.ashx" /> </customHandlers> Link: http://squad.jpkeisala.com/2011/10/sitecore-media-library-performance-optimization-checklist/   6) Performance counters should be disabled in production if not being monitored <setting name="Counters.Enabled" value="false" />   7) Disable Item/Memory/Timing threshold warnings. Due to the nature of this component, it brings no value in production. <!--<processor type="Sitecore.Pipelines.HttpRequest.StartMeasurements, Sitecore.Kernel" />--> <!--<processor type="Sitecore.Pipelines.HttpRequest.StopMeasurements, Sitecore.Kernel"> <TimingThreshold desc="Milliseconds">1000</TimingThreshold> <ItemThreshold desc="Item count">1000</ItemThreshold> <MemoryThreshold desc="KB">10000</MemoryThreshold> </processor>—>   8) The ContentEditor.RenderCollapsedSections setting is a hidden setting in the web.config file, which by default is true. Setting it to false will improve client performance for authoring environments. <setting name="ContentEditor.RenderCollapsedSections" value="false" />   9) Add a machineKey section to your Web.Config file when using a web farm. Link: http://msdn.microsoft.com/en-us/library/ff649308.aspx   10) If you get errors in the log files similar to: WARN Could not create an instance of the counter 'XXX.XXX' (category: 'Sitecore.System') Exception: System.UnauthorizedAccessException Message: Access to the registry key 'Global' is denied. Make sure the ApplicationPool user is a member of the system “Performance Monitor Users” group on the server.   11) Disable WebDAV configurations on the CD Server if not being used. More: http://sitecoreblog.alexshyba.com/2011/04/disable-webdav-in-sitecore.html   12) Change Log4Net settings to only log Errors on content delivery environments to avoid unnecessary logging. <root> <priority value="ERROR" /> <appender-ref ref="LogFileAppender" /> </root>   13) Disable Analytics for any content item that doesn’t add value. For example a page that redirects to another page.   14) When using Web User Controls avoid registering them on the page the asp.net way: <%@ Register Src="~/layouts/UserControls/MyControl.ascx" TagName="MyControl" TagPrefix="uc2" %> Use Sublayout web control instead – This way Sitecore caching could be leveraged <sc:Sublayout ID="ID" Path="/layouts/UserControls/MyControl.ascx" Cacheable="true" runat="server" />   15) Avoid querying for all children recursively when all items are direct children. Sitecore.Context.Database.SelectItems("/sitecore/content/Home//*"); //Use: Sitecore.Context.Database.GetItem("/sitecore/content/Home");   16) On IIS — you enable static & dynamic content compression on CM and CD More: http://technet.microsoft.com/en-us/library/cc754668%28WS.10%29.aspx   17) Enable HTTP Keep-alive and content expiration in IIS.   18) Use GUID’s when accessing items and fields instead of names or paths. Its faster and wont break your code when things get moved or renamed. Context.Database.GetItem("{324DFD16-BD4F-4853-8FF1-D663F6422DFF}") Context.Item.Fields["{89D38A8F-394E-45B0-826B-1A826CF4046D}"]; //is better than Context.Database.GetItem("/Home/MyItem") Context.Item.Fields["FieldName"]   Hope this helps.

  Read the article

• Randomly displayed flashing lines, no response to all shortcuts, just power off. [syslog included]

  - by B. Roland

  Hello! I have an old machine, and I want to use for that to learn employees how to use Ubuntu, and to be easyer to switch from Windows. I've been installed 10.04, and updated, but this strange stuff is happend. Graphical installion failed, same strange thing. With alternate workd. Sometimes, when I boot up, a boot message displayed: Keyboard failure..., often diplayed after reboot, and after shutdown, when I haven't plugged off from AC. I replaced the keyboard yet, same failure... If I powered off, and plugged off from AC, no keyboard problems displayed in boot time. Details Configuration: Dell OptiPlex GX60 - in original cover, no changes. 256 MB DDR 166 MHz Intel® Celeron® Processor 2.40 GHz Dell 0C3207 Base Board I know, that is not enough, but I have three other Nec compuers, with nearly similar config, and they works well with 9.10, 10.04, 10.10. Live CDs I've been tried with 10.04 and 10.10, but the problem is displayed too. With 9.10 no strange things displayed, but it froze, during a simple apt-get install. Syslog An error loop is logged here, but I paste the whole startup and error lines. The flashing lines are displayed sometimes immediately after login, but sometimes after 10 minutes, but once occured, that nothing happend. Strange thing is displayed immediately after login: here. An other boot, after some minutes, strange lines, and loop in log appeard: here. The loop should be that: Jan 23 00:20:08 machine_name kernel: [ 46.782212] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 23 00:20:08 machine_name kernel: [ 47.100033] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 23 00:20:08 machine_name kernel: [ 47.100045] render error detected, EIR: 0x00000000 Jan 23 00:20:08 machine_name kernel: [ 47.101487] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 16 at 9) Jan 23 00:20:11 machine_name kernel: [ 49.152020] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 23 00:20:11 machine_name gdm-simple-slave[1245]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory Jan 23 00:20:11 machine_name acpid: client 1239[0:0] has disconnected Jan 23 00:20:11 machine_name acpid: client connected from 1247[0:0] Jan 23 00:20:11 machine_name acpid: 1 client rule loaded UPDATE Added syslog things: before errors, error loop, the complete shutdown(after the big updates): Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully called chroot. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully dropped privileges. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully limited resources. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Watchdog thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Canary thread running. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Sucessfully made thread 1337 of process 1337 (n/a) owned by '1001' high priority at nice level -11. Jan 28 20:40:30 machine_name rtkit-daemon[1339]: Supervising 1 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1345 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 2 threads of 1 processes of 1 users. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Sucessfully made thread 1349 of process 1337 (n/a) owned by '1001' RT at priority 5. Jan 28 20:40:32 machine_name rtkit-daemon[1339]: Supervising 3 threads of 1 processes of 1 users. Jan 28 20:40:37 machine_name pulseaudio[1337]: ratelimit.c: 2 events suppressed Jan 28 20:41:33 machine_name AptDaemon: INFO: Initializing daemon Jan 28 20:41:44 machine_name kernel: [ 167.691563] lo: Disabled Privacy Extensions Jan 28 20:47:33 machine_name AptDaemon: INFO: Quiting due to inactivity Jan 28 20:47:33 machine_name AptDaemon: INFO: Shutdown was requested Jan 28 20:59:50 machine_name kernel: [ 1253.840513] lo: Disabled Privacy Extensions Jan 28 21:17:02 machine_name CRON[1874]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 21:17:38 machine_name kernel: [ 2321.553239] lo: Disabled Privacy Extensions Jan 28 22:07:44 machine_name kernel: [ 5327.840254] lo: Disabled Privacy Extensions Jan 28 22:17:02 machine_name CRON[2665]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:32:38 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 22:57:03 machine_name kernel: [ 8286.641472] lo: Disabled Privacy Extensions Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: Called Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: username = [some_user] Jan 28 22:57:24 machine_name sudo: pam_sm_authenticate: /home/some_user is already mounted Jan 28 23:07:42 machine_name kernel: [ 8925.272030] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:07:42 machine_name kernel: [ 8925.272048] render error detected, EIR: 0x00000000 Jan 28 23:07:42 machine_name kernel: [ 8925.272093] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171453 at 171452) Jan 28 23:07:45 machine_name kernel: [ 8928.868041] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:10 machine_name acpid: client 925[0:0] has disconnected Jan 28 23:08:10 machine_name acpid: client connected from 8127[0:0] Jan 28 23:08:10 machine_name acpid: 1 client rule loaded Jan 28 23:08:11 machine_name kernel: [ 8955.046248] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:12 machine_name kernel: [ 8955.364016] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:12 machine_name kernel: [ 8955.364027] render error detected, EIR: 0x00000000 Jan 28 23:08:12 machine_name kernel: [ 8955.364407] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171457 at 171452) Jan 28 23:08:14 machine_name kernel: [ 8957.472025] [drm:i915_gem_idle] *ERROR* hardware wedged Jan 28 23:08:14 machine_name acpid: client 8127[0:0] has disconnected Jan 28 23:08:14 machine_name acpid: client connected from 8141[0:0] Jan 28 23:08:14 machine_name acpid: 1 client rule loaded Jan 28 23:08:15 machine_name kernel: [ 8958.671722] [drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck Jan 28 23:08:15 machine_name kernel: [ 8958.988015] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung Jan 28 23:08:15 machine_name kernel: [ 8958.988026] render error detected, EIR: 0x00000000 Jan 28 23:08:15 machine_name kernel: [ 8958.989400] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 171459 at 171452) Jan 28 23:08:16 machine_name init: tty4 main process (848) killed by TERM signal Jan 28 23:08:16 machine_name init: tty5 main process (856) killed by TERM signal Jan 28 23:08:16 machine_name NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Jan 28 23:08:16 machine_name init: tty2 main process (874) killed by TERM signal Jan 28 23:08:16 machine_name init: tty3 main process (875) killed by TERM signal Jan 28 23:08:16 machine_name init: tty6 main process (877) killed by TERM signal Jan 28 23:08:16 machine_name init: cron main process (890) killed by TERM signal Jan 28 23:08:16 machine_name init: tty1 main process (1146) killed by TERM signal Jan 28 23:08:16 machine_name avahi-daemon[644]: Got SIGTERM, quitting. Jan 28 23:08:16 machine_name avahi-daemon[644]: Leaving mDNS multicast group on interface eth0.IPv4 with address 10.238.11.134. Jan 28 23:08:16 machine_name acpid: exiting Jan 28 23:08:16 machine_name init: avahi-daemon main process (644) terminated with status 255 Jan 28 23:08:17 machine_name kernel: Kernel logging (proc) stopped. Jan 28 23:09:00 machine_name kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 28 23:09:00 machine_name rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="516" x-info="http://www.rsyslog.com"] (re)start Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's groupid changed to 103 Jan 28 23:09:00 machine_name rsyslogd: rsyslogd's userid changed to 101 Jan 28 23:09:00 machine_name rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] When I hit the On/Off button, the system shuts down normally. May be it a hardware problem, but I don't know... Can you say something useful to solve my problem?

  Read the article

• 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

  - by user1898041

  Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

  Read the article

• Feedback Filtration&ndash;Processing Negative Comments for Positive Gains

  - by D'Arcy Lussier

  After doing 7 conferences, 5 code camps, and countless user group events, I feel that this is a post I need to write. I actually toyed with other names for this post, however those names would just lend itself to the type of behaviour I want people to avoid – the reactionary, emotional response that speaks to some deeper issue beyond immediate facts and context. Humans are incredibly complex creatures. We’re also emotional, which serves us well in certain situations but can hinder us in others. Those of us in leadership build up a thick skin because we tend to encounter those reactionary, emotional responses more often, and we’re held to a higher standard because of our positions. While we could react with emotion ourselves, as the saying goes – fighting fire with fire just makes a bigger fire. So in this post I’ll share my thought process for dealing with negative feedback/comments and how you can still get value from them. The Thought Process Let’s take a real-world example. This week I held the Prairie IT Pro & Dev Con event. We’ve gotten a lot of session feedback already, most of it overwhelmingly positive. But some not so much – and some to an extreme I rarely see but isn’t entirely surprising to me. So here’s the example from a person we’ll refer to as Mr. Horrible: How was the speaker? Horrible! Worst speaker ever! Did the session meet your expectations? Hard to tell, speaker ruined it. Other Comments: DO NOT bring this speaker back! He was at this conference last year and I hoped enough negative feedback would have taught you to not bring him back...obviously not...I will not return to this conference next year if this speaker is brought back. Now those are very strong words. “Worst speaker ever!” “Speaker ruined it” “I will not return to this conference next year if the speaker is brought back”. The speakers I invite to speak at my conference are not just presenters but friends and colleagues. When I see this, my initial reaction is of course very emotional: I get defensive, I get angry, I get offended. So that’s where the process kicks in. Step 1 – Take a Deep Breath Take a deep breath, calm down, and walk away from the keyboard. I didn’t do that recently during an email convo between some colleagues and it ended up in my reacting emotionally on Twitter – did I mention those colleagues follow my Twitter feed? Yes, I ate some crow. Ok, now that we’re calm, let’s move on to step 2. Step 2 – Strip off the Emotion We need to take off the emotion that people wrap their words in and identify the root issues. For instance, if I see: “I hated this session, the presenter was horrible! He spoke so fast I couldn’t make out what he was saying!” then I drop off the personal emoting (“I hated…”) and the personal attack (“the presenter was horrible”) and focus on the real issue this person had – that the speaker was talking too fast. Now we have a root cause of the displeasure. However, we’re also dealing with humans who are all very different. Before I call up the speaker to talk about his speaking pace, I need to do some other things first. Back to our Mr. Horrible example, I don’t really have much to go on. There’s no details of how the speaker “ruined” the session or why he’s the “worst speaker ever”. In this case, the next step is crucial. Step 3 – Validate the Feedback When I tell people that we really like getting feedback for the sessions, I really really mean it. Not just because we want to hear what individuals have to say but also because we want to know what the group thought. When a piece of negative feedback comes in, I validate it against the group. So with the speaker Mr. Horrible commented on, I go to the feedback and look at other people’s responses: 2 x Excellent 1 x Alright 1 x Not Great 1 x Horrible (our feedback guy) That’s interesting, it’s a bit all over the board. If we look at the comments more we find that the people who rated the speaker excellent liked the presentation style and found the content valuable. The one guy who said “Not Great” even commented that there wasn’t anything really wrong with the presentation, he just wasn’t excited about it. In that light, I can try to make a few assumptions: - Mr. Horrible didn’t like the speakers presentation style - Mr. Horrible was expecting something else that wasn’t communicated properly in the session description - Mr. Horrible, for whatever reason, just didn’t like this presenter Now if the feedback was overwhelmingly negative, there’s a different pattern – one that validates the negative feedback. Regardless, I never take something at face value. Even if I see really good feedback, I never get too happy until I see that there’s a group trend towards the positive. Step 4 – Action Plan Once I’ve validated the feedback, then I need to come up with an action plan around it. Let’s go back to the other example I gave – the one with the speaker going too fast. I went and looked at the feedback and sure enough, other people commented that the speaker had spoken too quickly. Now I can go back to the speaker and let him know so he can get better. But what if nobody else complained about it? I’d still mention it to the speaker, but obviously one person’s opinion needs to be weighed as such. When we did PrDC Winnipeg in 2011, I surveyed the attendees about the food. Everyone raved about it…except one person. Am I going to change the menu next time for that one person while everyone else loved it? Of course not. There’s a saying – A sure way to fail is to try to please everyone. Let’s look at the Mr. Horrible example. What can I communicate to the speaker with such limited information provided in the feedback from Mr. Horrible? Well looking at the groups feedback, I can make a few suggestions: - Ensure that people understand in the session description the style of the talk - Ensure that people understand the level of detail/complexity of the talk and what prerequisite knowledge they should have I’m looking at it as possibly Mr. Horrible assumed a much more advanced talk and was disappointed, while the positive feedback by people who – from their comments – suggested this was all new to them, were thrilled with the session level. Step 5 – Follow Up For some feedback, I follow up personally. Especially with negative or constructive feedback, its important to let the person know you heard them and are making changes because of their comments. Even if their comments were emotionally charged and overtly negative, it’s still important to reach out personally and professionally. When you remove the emotion, negative comments can be the best feedback you get. Also, people have bad days. We’ve all had one of “those days” where we talked more sternly than normal to someone, or got angry at something we’d normally shrug off. We have various stresses in our lives and sometimes they seep out in odd ways. I always try to give some benefit of the doubt, and re-evaluate my view of the person after they’ve responded to my communication. But, there is such a thing as garbage feedback. What Mr. Horrible wrote is garbage. It’s mean spirited. It’s hateful. It provides nothing constructive at all. And a tell-tale sign that feedback is garbage – the person didn’t leave their name even though there was a field for it. Step 6 – Delete It Feedback must be processed in its raw form, and the end products should drive improvements. But once you’ve figured out what those things are, you shouldn’t leave raw feedback lying around. They are snapshots in time that taken alone can be damaging. Also, you should never rest on past praise. In a future blog post, I’m going to talk about how we can provide great feedback that, even when its critical, can still be constructive.

  Read the article

• Accessing SharePoint 2010 Data with REST/OData on Windows Phone 7

  - by Jan Tielens

  Consuming SharePoint 2010 data in Windows Phone 7 applications using the CTP version of the developer tools is quite a challenge. The issue is that the SharePoint 2010 data is not anonymously available; users need to authenticate to be able to access the data. When I first tried to access SharePoint 2010 data from my first Hello-World-type Windows Phone 7 application I thought “Hey, this should be easy!” because Windows Phone 7 development based on Silverlight and SharePoint 2010 has a Client Object Model for Silverlight. Unfortunately you can’t use the Client Object Model of SharePoint 2010 on the Windows Phone platform; there’s a reference to an assembly that’s not available (System.Windows.Browser). My second thought was “OK, no problem!” because SharePoint 2010 also exposes a REST/OData API to access SharePoint data. Using the REST API in SharePoint 2010 is as easy as making a web request for a URL (in which you specify the data you’d like to retrieve), e.g. http://yoursiteurl/_vti_bin/listdata.svc/Announcements. This is very easy to accomplish in a Silverlight application that’s running in the context of a page in a SharePoint site, because the credentials of the currently logged on user are automatically picked up and passed to the WCF service. But a Windows Phone application is of course running outside of the SharePoint site’s page, so the application should build credentials that have to be passed to SharePoint’s WCF service. This turns out to be a small challenge in Silverlight 3, the WebClient doesn’t support authentication; there is a Credentials property but when you set it and make the request you get a NotImplementedException exception. Probably this issued will be solved in the very near future, since Silverlight 4 does support authentication, and there’s already a WCF Data Services download that uses this new platform feature of Silverlight 4. So when Windows Phone platform switches to Silverlight 4, you can just use the WebClient to get the data. Even more, if the OData Client Library for Windows Phone 7 gets updated after that, things should get even easier! By the way: the things I’m writing in this paragraph are just assumptions that I make which make a lot of sense IMHO, I don’t have any info all of this will happen, but I really hope so. So are SharePoint developers out of the Windows Phone development game until they get this fixed? Well luckily not, when the HttpWebRequest class is being used instead, you can pass credentials! Using the HttpWebRequest class is slightly more complex than using the WebClient class, but the end result is that you have access to your precious SharePoint 2010 data. The following code snippet is getting all the announcements of an Annoucements list in a SharePoint site: HttpWebRequest webReq =     (HttpWebRequest)HttpWebRequest.Create("http://yoursite/_vti_bin/listdata.svc/Announcements");webReq.Credentials = new NetworkCredential("username", "password"); webReq.BeginGetResponse(    (result) => {        HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;         XDocument xdoc = XDocument.Load(            ((HttpWebResponse)asyncReq.EndGetResponse(result)).GetResponseStream());         XNamespace ns = "http://www.w3.org/2005/Atom";        var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)                MessageBox.Show(item.Title);        });    }, webReq); When you try this in a Windows Phone 7 application, make sure you add a reference to the System.Xml.Linq assembly, because the code uses Linq to XML to parse the resulting Atom feed, so the Title of every announcement is being displayed in a MessageBox. Check out my previous post if you’d like to see a more polished sample Windows Phone 7 application that displays SharePoint 2010 data.When you plan to use this technique, it’s of course a good idea to encapsulate the code doing the request, so it becomes really easy to get the data that you need. In the following code snippet you can find the GetAtomFeed method that gets the contents of any Atom feed, even if you need to authenticate to get access to the feed. delegate void GetAtomFeedCallback(Stream responseStream); public MainPage(){    InitializeComponent();     SupportedOrientations = SupportedPageOrientation.Portrait |         SupportedPageOrientation.Landscape;     string url = "http://yoursite/_vti_bin/listdata.svc/Announcements";    string username = "username";    string password = "password";    string domain = "";     GetAtomFeed(url, username, password, domain, (s) =>    {        XNamespace ns = "http://www.w3.org/2005/Atom";        XDocument xdoc = XDocument.Load(s);         var items = from item in xdoc.Root.Elements(ns + "entry")                    select new { Title = item.Element(ns + "title").Value };         this.Dispatcher.BeginInvoke(() =>        {            foreach (var item in items)            {                MessageBox.Show(item.Title);            }        });    });} private static void GetAtomFeed(string url, string username,     string password, string domain, GetAtomFeedCallback cb){    HttpWebRequest webReq = (HttpWebRequest)HttpWebRequest.Create(url);    webReq.Credentials = new NetworkCredential(username, password, domain);     webReq.BeginGetResponse(        (result) =>        {            HttpWebRequest asyncReq = (HttpWebRequest)result.AsyncState;            HttpWebResponse resp = (HttpWebResponse)asyncReq.EndGetResponse(result);            cb(resp.GetResponseStream());        }, webReq);}

  Read the article

• Integrating Coherence & Java EE 6 Applications using ActiveCache

  - by Ricardo Ferreira

  OK, so you are a developer and are starting a new Java EE 6 application using the most wonderful features of the Java EE platform like Enterprise JavaBeans, JavaServer Faces, CDI, JPA e another cool stuff technologies. And your architecture need to hold piece of data into distributed caches to improve application's performance, scalability and reliability? If this is your current facing scenario, maybe you should look closely in the solutions provided by Oracle WebLogic Server. Oracle had integrated WebLogic Server and its champion data caching technology called Oracle Coherence. This seamless integration between this two products provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency, since Oracle provides an DI ("Dependency Injection") mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache. In this article, I will show you how to configure ActiveCache in WebLogic and at your Java EE application. Configuring WebLogic to manage Coherence Before you start changing your application to use Coherence, you need to configure your Coherence distributed cache. The good news is, you can manage all this stuff without writing a single line of code of XML or even Java. This configuration can be done entirely in the WebLogic administration console. The first thing to do is the setup of a Coherence cluster. A Coherence cluster is a set of Coherence JVMs configured to form one single view of the cache. This means that you can insert or remove members of the cluster without the client application (the application that generates or consume data from the cache) knows about the changes. This concept allows your solution to scale-out without changing the application server JVMs. You can growth your application only in the data grid layer. To start the configuration, you need to configure an machine that points to the server in which you want to execute the Coherence JVMs. WebLogic Server allows you to do this very easily using the Administration Console. In this example, I will call the machine as "coherence-server". Remember that in order to the machine concept works, you need to ensure that the NodeManager are being executed in the target server that the machine points to. The NodeManager executable can be found in <WLS_HOME>/server/bin/startNodeManager.sh. The next thing to do is to configure a Coherence cluster. In the WebLogic administration console, go to Environment > Coherence Clusters and click in "New". Call this Coherence cluster of "my-coherence-cluster". Click in next. Specify a valid cluster address and port. The Coherence members will communicate with each other through this address and port. Our Coherence cluster are now configured. Now it is time to configure the Coherence members and add them to this cluster. In the WebLogic administration console, go to Environment > Coherence Servers and click in "New". In the field "Name" set to "coh-server-1". In the field "Machine", associate this Coherence server to the machine "coherence-server". In the field "Cluster", associate this Coherence server to the cluster named "my-coherence-cluster". Click in "Finish". Start the Coherence server using the "Control" tab of WebLogic administration console. This will instruct WebLogic to start a new JVM of Coherence in the target machine that should join the pre-defined Coherence cluster. Configuring your Java EE Application to Access Coherence Now lets pass to the funny part of the configuration. The first thing to do is to inform your Java EE application which Coherence cluster to join. Oracle had updated WebLogic server deployment descriptors so you will not have to change your code or the containers deployment descriptors like application.xml, ejb-jar.xml or web.xml. In this example, I will show you how to enable DI ("Dependency Injection") to a Coherence cache from a Servlet 3.0 component. In the WEB-INF/weblogic.xml deployment descriptor, put the following metadata information: <?xml version="1.0" encoding="UTF-8"?> <wls:weblogic-web-app xmlns:wls="http://xmlns.oracle.com/weblogic/weblogic-web-app" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd http://xmlns.oracle.com/weblogic/weblogic-web-app http://xmlns.oracle.com/weblogic/weblogic-web-app/1.4/weblogic-web-app.xsd"> <wls:context-root>myWebApp</wls:context-root> <wls:coherence-cluster-ref> <wls:coherence-cluster-name>my-coherence-cluster</wls:coherence-cluster-name> </wls:coherence-cluster-ref> </wls:weblogic-web-app> As you can see, using the "coherence-cluster-name" tag, we are informing our Java EE application that it should join the "my-coherence-cluster" when it loads in the web container. Without this information, the application will not be able to access the predefined Coherence cluster. It will form its own Coherence cluster without any members. So never forget to put this information. Now put the coherence.jar and active-cache-1.0.jar dependencies at your WEB-INF/lib application classpath. You need to deploy this dependencies so ActiveCache can automatically take care of the Coherence cluster join phase. This dependencies can be found in the following locations: - <WLS_HOME>/common/deployable-libraries/active-cache-1.0.jar - <COHERENCE_HOME>/lib/coherence.jar Finally, you need to write down the access code to the Coherence cache at your Servlet. In the following example, we have a Servlet 3.0 component that access a Coherence cache named "transactions" and prints into the browser output the content (the ammount property) of one specific transaction. package com.oracle.coherence.demo.activecache; import java.io.IOException; import javax.annotation.Resource; import javax.servlet.ServletException; import javax.servlet.annotation.WebServlet; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.tangosol.net.NamedCache; @WebServlet("/demo/specificTransaction") public class TransactionServletExample extends HttpServlet { @Resource(mappedName = "transactions") NamedCache transactions; protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int transId = Integer.parseInt(request.getParameter("transId")); Transaction transaction = (Transaction) transactions.get(transId); response.getWriter().println("<center>" + transaction.getAmmount() + "</center>"); } } Thats it! No more configuration is necessary and you have all set to start producing and getting data to/from Coherence. As you can see in the example code, the Coherence cache are treated as a normal dependency in the Java EE container. The magic happens behind the scenes when the ActiveCache allows your application to join the defined Coherence cluster. The most interesting thing about this approach is, no matter which type of Coherence cache your are using (Distributed, Partitioned, Replicated, WAN-Remote) for the client application, it is just a simple attribute member of com.tangosol.net.NamedCache type. And its all managed by the Java EE container as an dependency. This means that if you inject the same dependency (the Coherence cache named "transactions") in another Java EE component (JSF managed-bean, Stateless EJB) the cache will be the same. Cool isn't it? Thanks to the CDI technology, we can extend the same support for non-Java EE standards components like simple POJOs. This means that you are not forced to only use Servlets, EJBs or JSF in order to inject Coherence caches. You can do the same approach for regular POJOs created for you and managed by lightweight containers like Spring or Seam.

  Read the article

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• Creating an SMF service for mercurial web server

  - by Chris W Beal

  I'm working on a project at the moment, which has a number of contributers. We're managing the project gate (which is stand alone) with mercurial. We want to have an easy way of seeing the changelog, so we can show management what is going on.  Luckily mercurial provides a basic web server which allows you to see the changes, and drill in to change sets. This can be run as a daemon, but as it was running on our build server, every time it was rebooted, someone needed to remember to start the process again. This is of course a classic usage of SMF. Now I'm not an experienced person at writing SMF services, so it took me 1/2 an hour or so to figure it out the first time. But going forward I should know what I'm doing a bit better. I did reference this doc extensively. Taking a step back, the command to start the mercurial web server is $ hg serve -p <port number> -d So we somehow need to get SMF to run that command for us. In the simplest form, SMF services are really made up of two components. The manifest Usually lives in /var/svc/manifest somewhere Can be imported from any location The method Usually live in /lib/svc/method I simply put the script straight in that directory. Not very repeatable, but it worked Can take an argument of start, stop, or refresh Lets start with the manifest. This looks pretty complex, but all it's doing is describing the service name, the dependencies, the start and stop methods, and some properties. The properties can be by instance, that is to say I could have multiple hg serve processes handling different mercurial projects, on different ports simultaneously Here is the manifest I wrote. I stole extensively from the examples in the Documentation. So my manifest looks like this $ cat hg-serve.xml <?xml version="1.0"?> <!DOCTYPE service_bundle SYSTEM "/usr/share/lib/xml/dtd/service_bundle.dtd.1"> <service_bundle type='manifest' name='hg-serve'> <service name='application/network/hg-serve' type='service' version='1'> <dependency name='network' grouping='require_all' restart_on='none' type='service'> <service_fmri value='svc:/milestone/network:default' /> </dependency> <exec_method type='method' name='start' exec='/lib/svc/method/hg-serve %m' timeout_seconds='2' /> <exec_method type='method' name='stop' exec=':kill' timeout_seconds='2'> </exec_method> <instance name='project-gate' enabled='true'> <method_context> <method_credential user='root' group='root' /> </method_context> <property_group name='hg-serve' type='application'> <propval name='path' type='astring' value='/src/project-gate'/> <propval name='port' type='astring' value='9998' /> </property_group> </instance> <stability value='Evolving' /> <template> <common_name> <loctext xml:lang='C'>hg-serve</loctext> </common_name> <documentation> <manpage title='hg' section='1' /> </documentation> </template> </service> </service_bundle> So the only things I had to decide on in this are the service name "application/network/hg-serve" the start and stop methods (more of which later) and the properties. This is the information I need to pass to the start method script. In my case the port I want to start the web server on "9998", and the path to the source gate "/src/project-gate". These can be read in to the start method. So now lets look at the method scripts $ cat /lib/svc/method/hg-serve #!/sbin/sh # # # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. # # Standard prolog # . /lib/svc/share/smf_include.sh if [ -z $SMF_FMRI ]; then echo "SMF framework variables are not initialized." exit $SMF_EXIT_ERR fi # # Build the command line flags # # Get the port and directory from the SMF properties port=`svcprop -c -p hg-serve/port $SMF_FMRI` dir=`svcprop -c -p hg-serve/path $SMF_FMRI` echo "$1" case "$1" in 'start') cd $dir /usr/bin/hg serve -d -p $port ;; *) echo "Usage: $0 {start|refresh|stop}" exit 1 ;; esac exit $SMF_EXIT_OK This is all pretty self explanatory, we read the port and directory using svcprop, and use those simply to run a command in the start case. We don't need to implement a stop case, as the manifest says to use "exec=':kill'for the stop method. Now all we need to do is import the manifest and start the service, but first verify the manifest # svccfg verify /path/to/hg-serve.xml If that doesn't give an error try importing it # svccfg import /path/to/hg-serve.xml If like me you originally put the hg-serve.xml file in /var/svc/manifest somewhere you'll get an error and told to restart the import service svccfg: Restarting svc:/system/manifest-import The manifest being imported is from a standard location and should be imported with the command : svcadm restart svc:/system/manifest-import # svcadm restart svc:/system/manifest-import and you're nearly done. You can look at the service using svcs -l # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled false state disabled next_state none state_time Thu May 31 16:11:47 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15749 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) And look at the interesting properties # svcprop hg-serve hg-serve/path astring /src/project-gate hg-serve/port astring 9998 ...stuff deleted.... Then simply enable the service and if every things gone right, you can point your browser at http://server:9998 and get a nice graphical log of project activity. # svcadm enable hg-serve # svcs -l hg-serve fmri svc:/application/network/hg-serve:project-gate name hg-serve enabled true state online next_state none state_time Thu May 31 16:18:11 2012 logfile /var/svc/log/application-network-hg-serve:project-gate.log restarter svc:/system/svc/restarter:default contract_id 15858 manifest /var/svc/manifest/network/hg/hg-serve.xml dependency require_all/none svc:/milestone/network:default (online) None of this is rocket science, but a bit fiddly. Hence I thought I'd blog it. It might just be you see this in google and it clicks with you more than one of the many other blogs or how tos about it. Plus I can always refer back to it myself in 3 weeks, when I want to add another project to the server, and I've forgotten how to do it.

  Read the article

• Clustering for Mere Mortals (Pt 3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  Start with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Clustering for Mere Mortals (Pt3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  IStart with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Network Access: I can't access 192.168.1.101 from 192.168.1.102.

  - by takpar

  Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

  Read the article

• Fun with Declarative Components

  - by [email protected]

  Use case background I have been asked on a number of occasions if our selectOneChoice component could allow random text to be entered, as well as having a list of selections available. Unfortunately, the selectOneChoice component only allows entry via the dropdown selection list and doesn't allow text entry. I was thinking of possible solutions and thought that this might make a good example for using a declarative component.My initial idea My first thought was to use an af:inputText to allow the text entry, and an af:selectOneChoice with mode="compact" for the selections. To get it to layout horizontally, we would want to use an af:panelGroupLayout with layout="horizontal". To get the label for this to line up correctly, we'll need to wrap the af:panelGroupLayout with an af:panelLabelAndMessage. This is the basic structure: <af:panelLabelAndMessage> <af:panelGroupLayout layout="horizontal"> <af:inputText/> <af:selectOneChoice mode="compact"/> </af:panelgroupLayout></af:panelLabelAndMessage> Make it into a declarative component One of the steps to making a declarative component is deciding what attributes we want to be able to specify. To keep this example simple, let's just have: 'label' (the label of our declarative component)'value' (what we want to bind to the value of the input text)'items' (the select items in our dropdown) Here is the initial declarative component code (saved as file "inputTextWithChoice.jsff"): <?xml version='1.0' encoding='UTF-8'?><!-- Copyright (c) 2008, Oracle and/or its affiliates. All rights reserved. --><jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"> <jsp:directive.page contentType="text/html;charset=utf-8"/> <af:componentDef var="attrs" componentVar="comp"> <af:xmlContent> <component xmlns="http://xmlns.oracle.com/adf/faces/rich/component"> <description>Input text with choice component.</description> <attribute> <description>Label</description> <attribute-name>label</attribute-name> <attribute-class>java.lang.String</attribute-class> </attribute> <attribute> <description>Value</description> <attribute-name>value</attribute-name> <attribute-class>java.lang.Object</attribute-class> </attribute> <attribute> <description>Choice Select Items Value</description> <attribute-name>items</attribute-name> <attribute-class>[[Ljavax.faces.model.SelectItem;</attribute-class> </attribute> </component> </af:xmlContent> <af:panelLabelAndMessage id="myPlm" label="#{attrs.label}" for="myIt"> <af:panelGroupLayout id="myPgl" layout="horizontal"> <af:inputText id="myIt" value="#{attrs.value}" partialTriggers="mySoc" label="myIt" simple="true" /> <af:selectOneChoice id="mySoc" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <f:selectItems id="mySIs" value="#{attrs.items}" /> </af:selectOneChoice> </af:panelGroupLayout> </af:panelLabelAndMessage> </af:componentDef></jsp:root> By having af:inputText and af:selectOneChoice both have the same value, then (assuming that this passed in as an EL expression) selecting something in the selectOneChoice will update the value in the af:inputText. To use this declarative component in a jspx page: <af:declarativeComponent id="myItwc" viewId="inputTextWithChoice.jsff" label="InputText with Choice" value="#{demoInput.choiceValue}" items="#{demoInput.selectItems}" /> Some problems arise At first glace, this seems to be functioning like we want it to. However, there is a side effect to having the af:inputText and af:selectOneChoice share a value, if one changes, so does the other. The problem here is that when we update the af:inputText to something that doesn't match one of the selections in the af:selectOneChoice, the af:selectOneChoice will set itself to null (since the value doesn't match one of the selections) and the next time the page is submitted, it will submit the null value and the af:inputText will be empty. Oops, we don't want that. Hmm, what to do. Okay, how about if we make sure that the current value is always available in the selection list. But, lets not render it if the value is empty. We also need to add a partialTriggers attribute so that this gets updated when the af:inputText is changed. Plus, we really don't want to select this item so let's disable it. <af:selectOneChoice id="mySoc" partialTriggers="myIt" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> That seems to be working pretty good. One minor issue that we probably can't do anything about is that when you enter something in the inputText and then click on the selectOneChoice, the popup is displayed, but then goes away because it has been replaced via PPR because we told it to with the partialTriggers="myIt". This is not that big a deal, since if you are entering something manually, you probably don't want to select something from the list right afterwards. Making it look like a single component. Now, let's play around a bit with the contentStyle of the af:inputText and the af:selectOneChoice so that the compact icon will layout inside the af:inputText, making it look more like an af:selectManyChoice. We need to add some padding-right to the af;inputText so there is space for the icon. These adjustments were for the Fusion FX skin. <af:inputText id="myIt" partialTriggers="mySoc" autoSubmit="true" contentStyle="padding-right: 15px;" value="#{attrs.value}" label="myIt" simple="true" /><af:selectOneChoice id="mySoc" partialTriggers="myIt" contentStyle="position: relative; top: -2px; left: -19px;" label="mySoc" simple="true" mode="compact" value="#{attrs.value}" autoSubmit="true"> <af:selectItem id="mySI" label="Selected:#{attrs.value}" value="#{attrs.value}" disabled="true" rendered="#{!empty attrs.value}"/> <af:separator id="mySp" /> <f:selectItems id="mySIs" value="#{attrs.items}" /></af:selectOneChoice> There you have it, a declarative component that allows for suggested selections, but also allows arbitrary text to be entered. This could be used for search field, where the 'items' attribute could be populated with popular searches. Lines of java code written: 0

  Read the article

• Using Apache FOP from .NET level

  - by Lukasz Kurylo

  In one of my previous posts I was talking about FO.NET which I was using to generate a pdf documents from XSL-FO. FO.NET is one of the .NET ports of Apache FOP. Unfortunatelly it is no longer maintained. I known it when I decidec to use it, because there is a lack of available (free) choices for .NET to render a pdf form XSL-FO. I hoped in this implementation I will find all I need to create a pdf file with my really simple requirements. FO.NET is a port from some old version of Apache FOP and I found really quickly that there is a lack of some features that I needed, like dotted borders, double borders or support for margins. So I started to looking for some alternatives. I didn’t try the NFOP, another port of Apache FOP, because I found something I think much more better, the IKVM.NET project.   IKVM.NET it is not a pdf renderer. So what it is? From the project site:   IKVM.NET is an implementation of Java for Mono and the Microsoft .NET Framework. It includes the following components: a Java Virtual Machine implemented in .NET a .NET implementation of the Java class libraries tools that enable Java and .NET interoperability   In the simplest form IKVM.NET allows to use a Java code library in the C# code and vice versa.   I tried to use an Apache FOP, the best I think open source pdf –> XSL-FO renderer written in Java from my project written in C# using an IKVM.NET and it work like a charm. In the rest of the post I want to show, how to prepare a .NET *.dll class library from Apache FOP *.jar’s with IKVM.NET and generate a simple Hello world pdf document.   To start playing with IKVM.NET and Apache FOP we need to download their packages: IKVM.NET Apache FOP and then unpack them.   From the FOP directory copy all the *.jar’s files from lib and build catalogs to some location, e.g. d:\fop. Second step is to build the *.dll library from these files. On the console execute the following comand:   ikvmc –target:library –out:d:\fop\fop.dll –recurse:d:\fop   The ikvmc is located in the bin subdirectory where you unpacked the IKVM.NET. You must execute this command from this catalog, add this path to the global variable PATH or specify the full path to the bin subdirectory.   In no error occurred during this process, the fop.dll library should be created. Right now we can create a simple project to test if we can create a pdf file.   So let’s create a simple console project application and add reference to the fop.dll and the IKVM dll’s: IKVM.OpenJDK.Core and IKVM.OpenJDK.XML.API.   Full code to generate a pdf file from XSL-FO template:   static void Main(string[] args)         {             //initialize the Apache FOP             FopFactory fopFactory = FopFactory.newInstance();               //in this stream we will get the generated pdf file             OutputStream o = new DotNetOutputMemoryStream();             try             {                 Fop fop = fopFactory.newFop("application/pdf", o);                 TransformerFactory factory = TransformerFactory.newInstance();                 Transformer transformer = factory.newTransformer();                   //read the template from disc                 Source src = new StreamSource(new File("HelloWorld.fo"));                 Result res = new SAXResult(fop.getDefaultHandler());                 transformer.transform(src, res);             }             finally             {                 o.close();             }             using (System.IO.FileStream fs = System.IO.File.Create("HelloWorld.pdf"))             {                 //write from the .NET MemoryStream stream to disc the generated pdf file                 var data = ((DotNetOutputMemoryStream)o).Stream.GetBuffer();                 fs.Write(data, 0, data.Length);             }             Process.Start("HelloWorld.pdf");             System.Console.ReadLine();         }   Apache FOP be default using a Java’s Xalan to work with XML files. I didn’t find a way to replace this piece of code with equivalent from .NET standard library. If any error or warning will occure during generating the pdf file, on the console will ge shown, that’s why I inserted the last line in the sample above. The DotNetOutputMemoryStream this is my wrapper for the Java OutputStream. I have created it to have the possibility to exchange data between the .NET <-> Java objects. It’s implementation:   class DotNetOutputMemoryStream : OutputStream     {         private System.IO.MemoryStream ms = new System.IO.MemoryStream();         public System.IO.MemoryStream Stream         {             get             {                 return ms;             }         }         public override void write(int i)         {             ms.WriteByte((byte)i);         }         public override void write(byte[] b, int off, int len)         {             ms.Write(b, off, len);         }         public override void write(byte[] b)         {             ms.Write(b, 0, b.Length);         }         public override void close()         {             ms.Close();         }         public override void flush()         {             ms.Flush();         }     } The last thing we need, this is the HelloWorld.fo template.   <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format"          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">   <fo:layout-master-set>     <fo:simple-page-master master-name="simple"                   page-height="29.7cm"                   page-width="21cm"                   margin-top="1.8cm"                   margin-bottom="0.8cm"                   margin-left="1.6cm"                   margin-right="1.2cm">       <fo:region-body margin-top="3cm"/>       <fo:region-before extent="3cm"/>       <fo:region-after extent="1.5cm"/>     </fo:simple-page-master>   </fo:layout-master-set>   <fo:page-sequence master-reference="simple">     <fo:flow flow-name="xsl-region-body">       <fo:block font-size="18pt" color="black" text-align="center">         Hello, World!       </fo:block>     </fo:flow>   </fo:page-sequence> </fo:root>   I’m not going to explain how how this template is created, because this will be covered in the near future posts.   Generated pdf file should look that:

  Read the article

< Previous Page | 311 312 313 314 315 316 317 318 319 320 321 322  | Next Page >