Search Results

Search found 18424 results on 737 pages for 'load balance'.

Page 316/737 | < Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >

  • Transparent parts of texture are opaque black instead

    - by Aaron
    I render a sprite twice, one on top of the other. The sprites have transparent parts, so I should be able to see the bottom sprite under the top sprite. The transparent parts are black (the clear colour) and opaque instead though and the topmost sprite blocks the bottom sprite. My fragment shader is trivial: uniform sampler2D texture; varying vec2 f_texcoord; void main() { gl_FragColor = texture2D(texture, f_texcoord); } I have glEnable(GL_BLEND) and glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA) in my initialization code. My texture comes from a PNG file that I load with libpng. I'm sure to use GL_RGBA when initializing the texture with glTexImage2D (otherwise the sprites look like noise).

    Read the article

  • Not enough space left in the hard drive. How to proceed?

    - by jimbobjgr
    Where do I begin... I can hardly do anything on Ubuntu 12.04. I am very close to removing and returning to Windows. First I could not load it because the graphics appeared to be running low but somehow that stopped happening and I could log on. Now I can not download anything or I get this message Cannot write: No space left on device. I tried trouble shooting this issue but every time I try and fix the problem I am blocked by this message E: Write error - write (28: No space left on device) E: Can't mmap an empty file E: Failed to truncate file - ftruncate (9: Bad file descriptor) E: The package lists or status file could not be parsed or opened. $ OLD=$(ls -tr /boot/vmlinuz-* | head -n -2 | cut -d- -f2- | awk '{print "linux-image-" $0}') Ubuntu is also running incredibly slow and I cant get anything done! Please help this is driving me mad!

    Read the article

  • Ubuntu 13.10 gets stuck on boot

    - by Robert frost
    I have updated (via the Software Updater) Ubuntu 13.04 to Ubuntu 13.10. After it had finished the installation, the system required a reboot. When I reboot and load Ubuntu it will get stuck on the logo. I managed to boot into the recovery (both console and graphics mode) but I can't figure out how to repair it. I have tried a sudo update-grub, but nothing different happened. I have also tried sudo apt-get install gnome, but the same result... I am using a dual-boot Win7 + Ubuntu.

    Read the article

  • Remove a bad/erroneous WebPart from a SharePoint page

    - by KunaalKapoor
    If you've added a poorly written webpart to your 'default.aspx' page, the consequence of this action will be that you won't be able to load the page anymore... Don't be sad, there is still a way to remove the webpart from the page :) (Yes, even removing the webpart from the webpart gallery would not solve this issue).Steps to fix this:1. Append the following query string to your URL: ?Contents=1.Once you've added Contents=1 as a query string to the webpart page's URL it will display the Webpart Maintenance Page. Example: http://mysharepointserver/default.aspx?contents=12. On that page you can now see the webparts added to the page, delete the problematic webpart.Now try reloading the default.aspx page... Tadaaa!!! you can view your page again :)3. Leave a thank you note @ comments section :)

    Read the article

  • Do you use to third party companies to review your company's code?

    - by CodeToGlory
    I am looking to get the following - Basic code review to make sure they follow the guidelines imposed. Security code analysis to make sure there are no loopholes. No performance bottlenecks by doing a load test etc. We have lot of code coming in from third parties and is becoming laborious to manage code reviews and hence looking to see if others employ such practices. I understand that it may be a concern for some and would raise the question "Well, who is going to make sure the agency is doing their job right?" But basically I am just looking for a third party who can hold all vendor code to the same standards.

    Read the article

  • How can I disable the prefetch cache?

    - by Oli
    I run a few Ubuntu servers that have a load of django sites running on them. The sites and the httpd start at boot and after that (apart from me SSHing in to update it or using bzr to update websites) nothing else gets run on it. At the moment over half the ram is allocated as cache. This isn't a problem because cache usually makes space or a little bit of it slips into swap (again, this doesn't really bother me) but I don't see the need for it. Is there a quick way to disable the cache? This is more of an experiment than anything else so it would be handy to know how to turn it back on again.

    Read the article

  • Ubuntu 12.04 and Realtek Wireless Card Incompatible

    - by Tim
    Quick background: I installed Linux Ubuntu 12.04 on a Dell Inspiron 3520 after uninstalling Windows 8. A friend suggested to do this as opposed to buying a laptop with Linux pre-installed. Everything except the wireless card works. When I load up the laptop, I see a wireless animation as if it's trying to locate the wireless connection (for a while, then it goes blank), but no connections appear under the wireless option (under "Edit Connections" then "Wireless"). What I've tried: - Doing ndiswrapper. Failed. - Installing a few kernels for realtek. Failed.

    Read the article

  • How do I make Ubuntu go past the splash screen?

    - by John Baber
    I recently upgraded my desktop mac to Precise and now can't get past the Ubuntu 12.04 splash page. The splash freezes with ubntu and the dots turning from white to orange forever. This is when I choose 3.2.0-generic from the grub menu. If I choose to load up older kernels, I still get the same thing. How can I make my computer finish booting again? I'm able to ssh into the machine and poke around, but the actual screen freezes at the splash. dmesg cat kern.log

    Read the article

  • How do I put different textures on different walls? LWJGL

    - by lehermj
    So far I have it so you are running around in a box, but all of the walls are the same texture! I've loaded up other textures for the walls (I want the walls a different texture than the floor) but it seems as if its being ignored... Here's my code: int floorTexture = glGenTextures(); { InputStream in = null; try { in = new FileInputStream("floor.png"); PNGDecoder decoder = new PNGDecoder(in); ByteBuffer buffer = BufferUtils.createByteBuffer(4 * decoder.getWidth() * decoder.getHeight()); decoder.decode(buffer, decoder.getWidth() * 4, Format.RGBA); buffer.flip(); glBindTexture(GL_TEXTURE_2D, floorTexture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, decoder.getWidth(), decoder.getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, buffer); glBindTexture(GL_TEXTURE_2D, floorTexture); } catch (FileNotFoundException ex) { System.err.println("Failed to find the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } catch (IOException ex) { System.err.println("Failed to load the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } finally { if (in != null) { try { in.close(); } catch (IOException e) { e.printStackTrace(); } } } } int wallTexture = glGenTextures(); { InputStream in = null; try { in = new FileInputStream("walls.png"); PNGDecoder decoder = new PNGDecoder(in); ByteBuffer buffer = BufferUtils.createByteBuffer(4 * decoder.getWidth() * decoder.getHeight()); decoder.decode(buffer, decoder.getWidth() * 4, Format.RGBA); buffer.flip(); glBindTexture(GL_TEXTURE_2D, wallTexture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, decoder.getWidth(), decoder.getHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, buffer); glBindTexture(GL_TEXTURE_2D, wallTexture); } catch (FileNotFoundException ex) { System.err.println("Failed to find the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } catch (IOException ex) { System.err.println("Failed to load the texture files."); ex.printStackTrace(); Display.destroy(); System.exit(1); } finally { if (in != null) { try { in.close(); } catch (IOException e) { e.printStackTrace(); } } } } int ceilingDisplayList = glGenLists(1); glNewList(ceilingDisplayList, GL_COMPILE); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, ceilingHeight, gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, ceilingHeight, gridSize); glEnd(); glEndList(); int wallDisplayList = glGenLists(1); glNewList(wallDisplayList, GL_COMPILE); glBegin(GL_QUADS); // North wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); // West wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(-gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, floorHeight, +gridSize); // East wall glTexCoord2f(0, 0); glVertex3f(+gridSize, floorHeight, -gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(+gridSize, floorHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, -gridSize); // South wall glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(-gridSize, ceilingHeight, +gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(+gridSize, ceilingHeight, +gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(+gridSize, floorHeight, +gridSize); glEnd(); glEndList(); int floorDisplayList = glGenLists(1); glNewList(floorDisplayList, GL_COMPILE); glBegin(GL_QUADS); glTexCoord2f(0, 0); glVertex3f(-gridSize, floorHeight, -gridSize); glTexCoord2f(0, gridSize * 10 * tileSize); glVertex3f(-gridSize, floorHeight, gridSize); glTexCoord2f(gridSize * 10 * tileSize, gridSize * 10 * tileSize); glVertex3f(gridSize, floorHeight, gridSize); glTexCoord2f(gridSize * 10 * tileSize, 0); glVertex3f(gridSize, floorHeight, -gridSize); glEnd(); glEndList();

    Read the article

  • Assigning a different texture based on picking(XNA)

    - by Thomas Carmichael
    I'm making a game using XNA. I have some simple objects like cube and sphere, and I would like to change the texture of one face of these objects based on picking. That is, when the cursor is over one face, it turns red. The only way I've seen to do this is to overload the content processor as here: http://xbox.create.msdn.com/en-US/education/catalog/sample/picking_triangle but it seems like it shouldn't be this complicated. I'm using .x models, and would like to be able to implement this for more complex models in the future beyond cubes/spheres/etc. Is this the best/only way to go about it? I'll figure that out if that's what is necessary, but it seems that there would be a simpler solution to load a different texture to a face than I've seen, I just don't know what it is.

    Read the article

  • ubuntu 12.04 can't find root partition (it doesn't look for btrfs partitions) end up with kernel-panic [closed]

    - by zalesz
    Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I'm running Ubuntu 12.04 from kernel v. 3.2.0-17 with all partitions formatted as BTRFS. It was everything ok till kernel 3.2.0-18/19. Now system don't load, after trying to run it with recovery there is a msg that kernel panic occurred cause there is no partition with ext3/4 and some other partitions but I don't see any btrfs alike type. Any ideas how to fix it? Best

    Read the article

  • Blank desktop after login

    - by Alex
    Today my 14.04 updated itself not requiring a reboot. After a while I rebooted because of other reasons and then I was pleasantly surprised by a blank screen. I have tried everything I could think about including Reinstalled compiz, unity, ubuntu-desktop, xorg Reinstalled and then removed the nvidia driver So far nothing has worked. Except for one little thing: my cairo-dock is showing. And that's all. I tried with Unity doesn't load, no Launcher, no Dash appears, but none of the answers there helped me. I also tried removing my ~/.Xauthority file and it still doesn't work. Does anybody know what else I could try? UPDATE: sudo dpkg-reconfigure xserver-xorg sudo service lightdm stop sudo service lightdm start When I run that code and then login again the icons on the desktop are displayed but the menu and the launcher are still not there. Also, when I try to run an application from CTRL + ALT + F1 such as dconf reset -f /org/compiz/ it says Cannot autolaunch D-Bus without X11 $DISPLAY I can only run applications with export DISPLAY=:0

    Read the article

  • Mobile traffic of my second site redirected to my base site [Edited,have a look]

    - by Faheem Rasheed
    I have a strange issue with my website and it seems i am unable to understand what cauese the problem.I would highly appreciate your help.The Scenario is I have two websites. Website A Website B Website A is simply hosted within the root directory of my hosting account.Within this root *directory* i have a sub folder " subfolder A " and within which is another subfolder " subfolder B " that contains my site Website B so the path looks like root/sublfolder_A/subfolder_B/ that contains my **Website B ( i.e subfolder_B) ** All goes fine.When i access the website B from my desktop/Laptop Website B is loaded normally. but when i access the Website through a mobile device , mobile site of Website A is loaded while as it should load website_B Also , to let you know , both websites have different URL's and not subdomain's or anything. What could be the problem ? htaccess of website B or website A ? or something else ? Here is the htaccess of my website B RewriteEngine On RewriteRule .* index.php [F] RewriteBase / RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .* index.php [L]

    Read the article

  • Can I copy large files faster without using the file cache?

    - by Veazer
    After adding the preload package, my applications seem to speed up but if I copy a large file, the file cache grows by more than double the size of the file. By transferring a single 3-4 GB virtualbox image or video file to an external drive, this huge cache seems to remove all the preloaded applications from memory, leading to increased load times and general performance drops. Is there a way to copy large, multi-gigabyte files without caching them (i.e. bypassing the file cache)? Or a way to whitelist or blacklist specific folders from being cached?

    Read the article

  • Dual boot windows 8.1 acer V3-571G with Ubuntu 13.10

    - by tara512
    I am trying to dual boot my acer which came with windows 8 pre-installed. I tried using the tutorial here doing it the simple way but when I load Ubuntu from my transcended flash drive it says that there is no other operating system installed. I tried partitioning my hard drive but I seem to have 3 recovery partitions and even though I have 485GB free I can only allocate 100GB to the new partition. I would like to have most of my hard drive allocated to Ubuntu and just use the windows for programs like microsoft office.

    Read the article

  • HTML5 - check if font has loaded

    - by espais
    At present I load my font for my game in with @font-face For instance: @font-face { font-family: 'Orbitron'; src: url('res/orbitron-medium.ttf'); } and then reference it throughout my JS implementation as such: ctx.font = "12pt Orbitron"; where ctx is my 2d context from the canvas. However, I notice a certain lag time while the font is downloaded to the user. Is there a way I can use a default font until it is loaded in? Edit - I'll expand the question, because I hadn't taken the first comment into account. What would the proper method of handling this be in the case that a user has disabled custom fonts?

    Read the article

  • New Solaris Cluster!

    - by Jeff Victor
    We released Oracle Solaris Cluster 4.1 recently. OSC offers both High Availability (HA) and also Scalable Services capabilities. HA delivers automatic restart of software on the same cluster node and/or automatic failover from a failed node to a working cluster node. Software and support is available for both x86 and SPARC systems. The Scalable Services features manage multiple cluster nodes all providing a load-balanced service such as web servers or app serves. OSC 4.1 includes the ability to recover services from software failures, failure of hardware components such as DIMMs, CPUs, and I/O cards, a global file system, rolling upgrades, and much more. Oracle Availability Engineering posted a brief description and links to details. Or, you can just download it now!

    Read the article

  • Microphone doesn't give any input, yet music does

    - by user52643
    I've tried a few guides but nothing works as of yet. I've tried two microphones, both of which work on my Vista setup but do nothing on Ubuntu. Nothing is on mute both on the Sound utility or Skype (which I'm trying to use my mic for). I've been informed that when my speakers are playing very load, this can be heard on the other end of a call, too. See link for cat /proc/asound/card0/codec#0 results which are apparently relevant... _' N.B. I am noob x

    Read the article

  • BIOS Always Freezes Instantly

    - by Louis
    I'm not sure if this is necessarily a Ubuntu question, but I've only had the problem since I installed 12.10. When I turn my computer on, the BIOS screen comes up as usual and... nothing else. When I press any key, I hear a loud beep and there's no response. I've tried looking for similar problems, but in most cases people are at least able to interact with their BIOS even if their OS doesn't load. It seems as though it's just completely freezing as soon as I turn it on.

    Read the article

  • SEO Impact of using Responsive Design and the serving of different content on the same URL

    - by bmenekl
    We are currently working on redesigning our site and making it responsive. It is a search intensive site with complex functionality, a lot of search filters and a lot of content. Our mobile versions of certain pages need to hide some functionality (i.e. search filters) that exists in the desktop version and/or content (mainly blocks of text that are not necessary or are increasing page load in mobile devices). My questions is this: does the situation of having the same URL (responsive site) serving slightly different content (text and/or search filters) for certain pages in different devices affect our SEO (SERPs or otherwise)?

    Read the article

  • Google I/O 2012 - How we Make JavaScript Widgets Scream

    Google I/O 2012 - How we Make JavaScript Widgets Scream Malte Ubl, John Hjelmstad When loading websites every millisecond counts. Social widgets should enhance a website experience and they should definitely not slow it down. We'll walk through the unique challenges of loading social widgets such as the +1 button and how we made sure that they load as fast as possible -- yes, there will be war stories! While we'll focus on widget performance, many of the techniques we used have wider applicability and we'll show how they can make your website faster, too. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 734 3 ratings Time: 51:44 More in Science & Technology

    Read the article

  • How do I run Microsoft Explorer 8 plus on Ubuntu?

    - by user169487
    First off, you should know I'm a Ubuntu newbie who has become passionate since my strangely low-priced Dell computer showed up with Ubuntu loaded on it and it could do almost everything I need from a computer. But now I've got a problem. I know, it's like asking how to use a cassette player on your computer, but in South Korea EVERY website is made to work with exclusively on MS Explorer PLUS Active X, which Microsoft finally killed with 9. Hence, I have to use 8, as there are some Korean sites I need to access for searching, banking, etc. So I see that the way to go is to load PlayOnLinux, but then I it tells me to delete these. Do I really have to do that? Should I just hit "Install Anyway"? Or would that be just asking for trouble?

    Read the article

  • Are HTTP requests cached? [closed]

    - by nischayn22
    Many HTTP requests are sent repeatedly by browsers on almost every page load, such as requesting the jQuery .js file etc. Since these are already used on too many sites doesn't modern browsers keep a cache for this? I am thinking of a system where the browser has a cached copy of the .js file used very very frequently. On a new request for the .js file, it sends the server a request for a hash of the .js file (provided the server can reply to that) and compares the returned hash with the cached copy's hash... rest is intuitive.

    Read the article

  • Slow writing HDD speed, Ubuntu 12.04 64-bit, Thinkpad T520i

    - by pyc
    It seems that (but I'm not completely sure), that when I'm copying files from gigabit network to HDD, I can't use full potential of the network which in my case is about 60 MB/s, because HDD writing is so slow like lower than 10 MB/s, and also it's slowing down the whole system which becomes pretty much unresponsive, almost impossible to work with. Copying files to samba share residing at Ubuntu machine, connected to share from Windows 7, I'm completely sure my network equipment is OK, and there's no CPU intensive process on Ubuntu except smbd getting about 10-20% from time to time which I think is OK. Something here is burried deep I think, maybe even in kernel. Already tried to switch from AHCI to compatibility mode, and turning acpi on and off - nothing helped. So it's like HDD buffer is full and emptying slowly while machine is sluggish, load is about 3 to 4. Somebody experienced the similar problems? Some help on troubleshooting process and identifying the cause would be helpful too :) Thanks!

    Read the article

  • Can't install ATI proprietary drivers in 12.10

    - by EApubs
    I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

    Read the article

< Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >