Search Results

Search found 9318 results on 373 pages for 'rescue disk'.

Page 317/373 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >

• sql server 2008 cluster hang when a heavy load is run

  - by Billy OT

  we have a sql server 2008 active/active cluster running on wondows 2008R2 O/S. 14GB RAM, 4xCPU. we have set a ceiling of 12GB for sql server. We're running an agent job which loads 3 million records to a database. during this load the job fails and the cluster seems to attempt to fail over to the other node but unsuccessfully i.e., the cluster address is no longer accessible. we have to manually fail the cluster node back. during the load on viewing task manager we can see that memory usage hits a max of 12.5GB and CPU at times hits 100% on all 4 CPU, but for the most part fluctuates at an average of about 60%. I suppose my question is, will a cluster try to fail over if memory or CPU are taking a heavy hit? or am i barking up the wrong tree? also any ideas why it wouldn't fully fail over? we've crawled through logs, of which there are a lot, and can't find anything useful. we've also tried recreating the issue but it ran successfully at a later time. Also 3 million rows doesn't seem like a lot but in terms of resources should 14GB RAM and 4xCPU not be sufficient? Further information on this, we ran the load again today and corrupted the database! We received the error message : LogWriter: Operating system error 170. It looks like, under the heavy load, the sql cluster attempted to fail over and in doing so migrated a lun (or drive) which meant the disk was no longer reachable. (this is just our theory). The database is now 'suspect' and requiring restoration. The 170 error above also indicates that on failing over to the other node, the sql service could not start as it was already in use, therefore it couldn't fail over fully?? But I'm wondering why would it need to fail over in the first place? My assumptions could be completely wrong on this, so any ideas would be appreciated.

  Read the article

• File sharing for small, distributed, non-technical, non-profit organization?

  - by mnmldave

  Problem: I've started volunteering for a small non-profit with fewer than five non-technical Windows users who need to share 20-30GB of files (Office documents, images, PDFs, etc.) amongst themselves online. Background: The users are accustomed to a Windows network share on a machine that backed up their data locally. An on-site "disaster" has forced them to work from their homes for awhile and to re-evaluate their file sharing needs (office was located in an old building with obvious electrical issues, etc.). Access to time from volunteers with IT experience seems to be difficult. Demonstrably minimizing energy consumption is a nice-to-have. I'm currently considering Jungle Disk (a Desktop account shared amongst the handful of employees since their TOS and my inquiries to their helpdesk seem to indicate this is permissible). It appears easy-to-use, inexpensive, secure, has backup functionality, and can scale to accomodate more data when needed. I've not used it myself though (have only used Dropbox for personal use) and systems isn't my area of expertise, so am worried I might be jumping on a bandwagon. That said, any suggestions, thoughts or similar experiences would be really appreciated.

  Read the article

• Xen guests accessing LUNs

  - by mechcow

  We are using RHEL5.3 with a Clarion SAN attached by FC. Our situation is that we have a number of LUNs presented to Hosts and we want to dynamically present the LUNs to Xen Guests. We are not sure on what the best practice approach is to set this up. The Xen guests will form a cluster together and need the LUNs only for data partitions, i.e. when they are actively running services. So one approach would be to always present all disks to all Xen guests, and then rely up on the cluster software, and mount itself, to not mount the disk twice in two locations. This sounds kinda risky and also is not very secure (one cracked guest can see/destroy all the data). Another approach would be to dynamically add and remove the disks from the Xen guests at the dom0 level (using xm block-attach). This could work but sounds slightly complicated, I'm wondering whether Red Hat Cluster Suite supports this in some way or whether there are scripts to do this. Yet another approach would be to have the LUNs endpointed at the Xen guests themselves - I'm not sure whether this is technically possible since the multipathing has to be done at the Host level.

  Read the article

• Spotlight can't see anything in Applications

  - by mix

  There have been other threads on this but none of the solutions mentioned have helped me. Spotlight has stopped showing any results for my Applications. I've tried reindexing and removing the index so it rebuilds it. No change. I've tried adding Applications to the Privacy tab and removing it, no change. I tried repairing disk permissions and redoing the above, no change. I've tried removing everything from the index except Applications and then I just get nothing for any search at all (except dictionary entries). I tried adding a symlink in my homedir to Applications and reindexing, but no change. Any ideas on what to do? I'm running Snow Leopard. This is driving me crazy! Update: I've noticed that when I start a reindex with sudo mdutil -E / and then immediately do a spotlight search for an app that the app shows up temporarily until spotlight gets disabled due to active indexing. After the indexing is done the app entries go away.

  Read the article

• What benchmark tool to use to benchmark hardware for VM server?

  - by Mark0978

  We are setting up a new piece of hardware to virtualize several of our servers on. Choices are RAID 5, RAID 6, and RAID 0+1. We are wanting to benchmark all three before we go live with the machine, but I'm not sure how to test the speed. Since we will be using it to host VMs, what will the actual disk traffic look like? What can I use to see if RAID 6 is too slow? Short of setting up the system with all the VM's on it and running that way, then redoing on all the work, I'm not sure how to test it. It them becomes more of a subjective test than an objective one. I'm worried that RAID6 will have too much overhead, that RAID5 will be to fragile with 3TB drives and I've never worked with 0+1 at all. So in short I'd like to setup the base machine (which will be running Linux) and then test the underlying SW RAID for speed. What kind of tool exists to simulate this kind of load? Barring the lack of a specific tool, how about a generic FS testing tool that will simulate different loads?

  Read the article

• ext4 filesystem corruption -- maybe hardware error?

  - by pts

  I'm getting these errors in dmesg after about half an hour after I turn on the computer: [ 1355.677957] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318420: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251700offset=0(0), inode=1802725748, rec_len=179136, name_len=32 [ 1355.677973] Aborting journal on device sda2-8. [ 1355.678101] EXT4-fs (sda2): Remounting filesystem read-only [ 1355.690144] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318416: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251699offset=0(0), inode=2194783952, rec_len=53280, name_len=152 [ 1356.864720] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1312795: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251176offset=1460(13748), inode=1432317541, rec_len=208208, name_len=119 /dev/sda is an SSD, and it's using the noop scheduler. /etc/fstab entry: UUID=acb4eefa-48ff-4ee1-bb5f-2dccce7d011f / ext4 errors=remount-ro,noatime,discard,user_xattr 0 1 System information: $ cat /proc/mounts | grep /dev/sd /dev/sda1 /boot ext2 rw,noatime,errors=continue 0 0 $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS" $ uname -a Linux leetpad 2.6.35-30-generic-pae #61~lucid1-Ubuntu SMP Thu Oct 13 21:14:29 UTC 2011 i686 GNU/Linux I've run memtest for 7 hours, it didn't found any memory errors. Any obvious ideas what can go wrong in this case? The most reasonable thing I can imagine is that the SSD is silently dropping some write requests, which eventually leads to an EXT4 filesystem inconsistency (but no disk I/O errors). How can this happen? Is there a relevant configuration option I should ensure to be set correctly? What tools should I use to diagnose the hardware failures? Would it be possible to diagnose the SSD failure without overwriting data?

  Read the article

• virtualbox snapshot size

  - by intuited

  I've started using Windows 7 under VirtualBox on an Ubuntu 10.10 host. I took about 6 snapshots over the course of setting up the VM from the Windows restore image that came with the computer. My installations were more or less limited to windows updates, antivirus, and the VB Guest Additions. I uninstalled much more than I installed. The VM was running for about 24 hours total. The snapshots increased in size at a worrisome rate, even when the machine was idle: the snapshot .vdi file for the period between 11:22 PM and 9:02 AM is 6 gigs in size; during that time very little happened. The other .vdi files are between 0.5 and 3 GB, most between 1 and 2 GB. The corresponding .sav files are between 0.5 and 1 GB. The Internet connection where I was doing this is limited to 30KB/s download, which, constantly saturated, works out to less than 3 GB per 24 hour period. Is this normal? Is there something that can be done to make snapshots more practical? update On starting up the VM again, I've noticed that mscorsvw is using significant processing time. Apparently this process [precompiles .NET assemblies]. This may have been going on during the period when I was taking snapshots, which might explain some of the snapshot size increase. I would be somewhat surprised to learn that this could be responsible for over 10 GB of additional disk usage, or that it would run for roughly 24 hours. Is this possible?

  Read the article

• Intel Rapid Storage Technology (pre-OS) driver installation

  - by Nero theZero

  My desktop machine is built on Gigabyte GA-Z87-UD3H and Gigabyte provides the latest driver for Intel Rapid Storage Technology (IRST), which I installed after installing the OS. Same goes for my Lenovo Thinkpad-T420. And for both machine, checking the controller device under the IDE ATA/ATAPI Controllers section in Device Manager I see the driver has been updated to the latest version. I set the SATA controller to AHCI from BIOS On the desktop machine I have one WD 2TB BLACK & one WD 3TB Green I don’t use RAID, & no chance of using in near future, but according to Intel IRST improves performance in single disk scenario too. Now I have the following questions – What is the actual purpose of IRST (pre-OS install) driver that doesn’t get served with a post-OS driver that I installed? There must be some difference, otherwise there wouldn’t be a pre-OS version of the driver. Right? In the pre-OS procedure (loading the drivers at OS-installation time) after successfully completing the OS installation, do I need that post-OS driver? Because after installing from that one I got a quick launch icon that runs the IRST configuration application. Where do get that after installing the pre-OS driver? As it is “pre-OS”, when I load it at OS-installation time, does it updates anything at BIOS level or anywhere other than HDD? That’s because I’m going to dual boot Windows 7 with Windows 8.1, and after installing Windows 7 when I install Windows 8.1 & load the IRST driver for that, is there any chance of any “overwriting” or OS-incompatibility? In short, is there anything specific to follow while installing the second OS?

  Read the article

• Change which server mailbox is associated with in Exchange 2007

  - by tacos_tacos_tacos

  I have restored and mounted an EDB file onto a new Exchange 2007 Server. However, the old server is still online and although all the mailboxes I need are in the newly-mounted database, in Exchange 2007 System Manager it still shows that the mailbox is associated with the old server. If I try to "Move" the database it actually tries to copy the files from the old server to the new server, which is not necessary because they are already there - and produces and error about the mailbox on the destination already existing. How can I simply tell Exchange (AD?) to use the new server to find the mailbox rather than the old? Edit: I did the restore by taking the old server offline (turning off all Exchange services), copying EDB file to the new server, restoring it with eseutil, and mounting it to the new server. I did it this way in part because I didn't know a better way and in part because I couldn't use move-mailbox as the source location had a horrible Internet connection (which is why Exchange is being moved to the new location). I had to copy the EDB from the old server to a hard disk, go somewhere with a better Internet connection, upload the EDB to the new server.

  Read the article

• Can't pop3 from exchange server after a reboot

  - by BLAKE

  Last night I shutdown my Exchange 2003 Virtual Machine, I added a new VHD (For backups), and booted it again. Now I can't POP3 email from it with Outlook 2007. In Outlook I get the error: Task '[email protected] - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).' Does anybody know what is wrong? All I did was a reboot. I haven't formated the added disk. There are no weird errors in the event log. I can still send mail with Outlook over port 25. I can send and recieve mail with OWA. I can POP3 the mail to my phone (it take about 15 minutes after sending a message, but I do get it eventually). EDIT: The 'Microsoft Exchange POP3' Service says that it is started but if I stop it and try to start it again, it fails saying 'Could not start the Microsoft Exchange POP3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion.' I did some googling and someone on exchangefreaks.com said that if I use task manager to 'End Task' on inetinfo.exe, then I can start the POP3 service fine. Does anyone know what causes this problem? I am fine for now since I did get the Service started, but If it does this after every reboot...

  Read the article

• What do different patterns mean in Windows 8 file copy dialog

  - by MainMa

  When copying or extracting files, Windows 8 shows the chart with the speed of the operation. I noticed several patterns: Randomness, High speed at the beginning, then low speed during the most part of the operation, Mostly constant speed. 1. Randomness/nice mountains. 2. High speed at the beginning, then low speed during the most part of the operation. 3. Low speed at the beginning, then high speed during the most part of the operation. (Similar to the previous image, but inverted) 3. Mostly constant speed. (Same as previous image, but without the fast start) I'm curious, what each of those patterns mean? Do some indicate that there may be a problem with hard disk performance? Why the nearly constant speed is so rare, even when copying a single large file from and to a spinning drive, or when copying a single large file or a bunch of small files from and to an SSD?

  Read the article

• Xen networking is inconsistent in multiple ways

  - by WildVelociraptor

  I've been running xen for a few weeks now on an Ubuntu 12.04 server. I've got 3 guests: a Windows Server 2003 guest, an Ubuntu guest, and a Windows 7 Guest. My Server 2003 guest seems to work fine; I can ping it from the network, the hostname resolves correctly, and it can see the internet. This guest is attached to xenbr0, and its IP is 10.100.1.21. My Win7 guest is what is driving me crazy. I use the same configuration script as a base, changing the important parts (hostname and boot disk, mainly). It installed correctly, and is currently running, but I am unable to ping this guest. It's hostname is "alexander", with an IP of 10.100.1.22. It is also using xenbr0. The guest can ping the firewall and various IP addressess, but seems unable to resolve hostnames. Now heres the weird part: when I use rdesktop (RDP client) from my laptop (not the xen host) to connect to alexander, it works just fine. It apparently resolves the hostname fine, and does the same with the IP address. So, can someone tell me why I can access this guest using RDP, but not using ping, nslookup, traceroute, etc? It's apparently invisible to all but RDP. Also, is it okay to use two guests on the same bridge, or do i need different ones for each guest? Thanks in advance for any help. Regards

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• Macbook Pro Triple Boot OS X Lion, Windows 7 and Windows 8

  - by Lloyd Sparkes

  MacBook Pro (Summer 2010 Model, Basic Model) I currently have OS X Lion and Windows 7 running side by side on my MacBook Pro. However I have a need to get Windows 8 running as well in this mix (a Virtual Machine is not good enough, I need the performance). I have created a suitably sized parition (80GB) that is recognizable in Boot Camp. However every time I try to boot from the USB stick (that worked to install Windows 8 on my PC) using the latest version of rEFIt, it just boots Windows 7 and not the Windows 8 installer. I cannot start the installation within Windows 7 as it will just install over Windows 7. I'm guessing the Boot Camp emulation is doing something werid to stop the "Press any key to install Windows..." message from appearing (which should happen if the installer detects Windows is already installed (e.g. if you left your install disk in). Is there a way to get around this / force the installer to start? (Note I cannot start the Windows 7 installer either if I wanted to install a second copy of Windows 7 to upgrade to Windows 8)

  Read the article

• Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

  - by MichaelGG

  Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

  Read the article

• I get a Segmentation fault when doing apt-get util-linux

  - by Adam

  I've found that a lot of upgrade commands and Apache on my system are failing with Segmentation faults. I don't know if this is the main one, but a lot of packages depend on util-linux: root@myUbuntuHardyHeronServer:~# apt-get install util-linux Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: util-linux 1 upgraded, 0 newly installed, 0 to remove and 72 not upgraded. 20 not fully installed or removed. Need to get 0B/441kB of archives. After this operation, 0B of additional disk space will be used. (Reading database ... 20547 files and directories currently installed.) Preparing to replace util-linux 2.13.1-5ubuntu2 (using .../util-linux_2.13.1-5ub untu3.1_i386.deb) ... Unpacking replacement util-linux ... Segmentation fault dpkg: warning - old post-removal script returned error exit status 139 dpkg - trying script from the new package instead ... Segmentation fault dpkg: error processing /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386 .deb (--unpack): subprocess new post-removal script returned error exit status 139 Segmentation fault dpkg: error while cleaning up: subprocess post-removal script returned error exit status 139 Errors were encountered while processing: /var/cache/apt/archives/util-linux_2.13.1-5ubuntu3.1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Ubuntu 10.04 - Add RAID 1 Array?

  - by N Rahl

  I have an existing Ubuntu 10.04 desktop system setup and running on a hard drive (Drive A). I'd like to add 2 more hard drives (Drives B & C, same size) to the system and mount them as a RAID 1 array. How do I do that? I know how to create RAID arrays during the installation, but I don't want to reinstall my system, and I shouldn't have to since my system files will stay on their own drive separate from the RAID array. I've physically added both drives to the system, and formatted them as EXT3 with gparted. Ubuntu's disk utility has a "create raid" option, but it won't let me select any of my drives (it thinks they're all full). I don't mind using mdadm, but I've found several guides that are old, and give conflicting advice. Some say I have to edit an /etc/raidtab file, some say this is done automatically. So what's the current (Ubuntu 10.04) preferred way of adding a RAID 1 to an existing system? It should turn into a raid at boot, and mount itself in /home/myname/files/. Thanks!

  Read the article

• Windows 7 Black Screen On Boot, Seperate Bootable VHD Works Fine

  - by David Osborn

  I have a Window 7 x64 install with a bootable VHD (also Windows 7 x64). I was having problems getting my homeserver to do backups (VSS erred) so I ran check disk and used a tool from MS (cleanc2r.exe) to remove an empty Q drive from the VHD that I believe was a result of installing Office 2010 Beta. (All of this was done on the bootable VHD, not the main install.) Now I can't boot into the main install. It gets past the Starting Windows screen and then goes black. I can still boot into the bootable VHD and everything works fine from there. I have tried to boot the main install in Safe Mode/Safe Mode with Networking/and Safe Mode command prompt and it has the same issue. I ran chkdsk /r on the main install and after doing all the work there was a message about correcting some free space that was marked as allocated and also that it was unable to make an entry into the event log. I tried the startup repair utility and it found no problems. I don't see the setting for restore to last know good configuration so I couldn't do that. I don't recall installing anything new to the main install nor having hooked up any new hardware recently.

  Read the article

• Monit - script not being executed as expected

  - by Thaís

  I'm working on a Windows 7 machine, having a VM for Ubuntu (image disk: 12.04-desktop-i386.iso). On the VM I installed Monit 5.3.2, and configured some processes and applications. So I created a script to run my application. This application should display some content on the screen (Im basically displaying two images, using Feh). The thing is: if I call my script through the command line, it runs ok, and display the images. But if I run through monit, it seems to be running ok, but it doesn't display the images.In the case I try to debug it (remote debug), then I can see the images. So I was supposing this could be some kind of configuration, but didn't find out what (even using the option -I wou'ldn't work). I"m showing below more details: -Piece of script on Monit---- check program runMediaHandler with path "/usr/bin/runMediaHandler.sh" if status == 1 then alert -runMediaHandler.sh ---- #!/bin/bash java -jar /home/thais/Desktop/MediaHandler_RC2.jar Summarizing: 1.What works: if I run java directly: java -jar /home/thais/Desktop/MediaHandler_RC2.jar if I run the script directly: runMediaHandler.sh if I remote debug putting a breakpoint where the image should be displayed 2.What does not work: putting that piece of information on Monit to "check program", writen above (even if calling monit -I start runMediaHandler) Thank you in advance, Thaís

  Read the article

• Simple end-to-end load and bottleneck monitoring for DB-based web sites

  - by T.J. Crowder

  What tools do you use / would you recommend for monitoring a Linux-based, DB-based website's servers for bottlenecks and load? The obvious goal being to know when growth has gotten to the point where it's necessary to scale up (or out) one or more of the bits and pieces because the current system won't be managing the load if an observed trend continues. I'm looking for general recommendations based on standard Linux load metrics, disk I/O metrics, network I/O metrics, etc., but if specifics are helpful: It'll be Tomcat6 using APR (possibly with a Varnish or similar caching and balancing front-end), MySQL, and either Ubuntu 8.04 LTS or 10.04 LTS depending on timing. I know about top, vmstat, iostat, bwmon and the like that collect and parse info from the /proc file system (et. al.); and obviously MySQL provides a lot of queriable performance information. I could use those directly, probably automating periodic monitoring logs with scripts and such. But I have a suspicion that I'd be reinventing a wheel... For example, Hyperic HQ seems to be along the lines of what I'm looking for. Others? Meta: I tend to think of "recommendation" questions as needing to be CW because there's no one right answer, but I see a lot of these here that aren't CWs, so I haven't marked it as one. I'll happily do so if enough people think I should.

  Read the article

• Picking a linux compatible motherboard

  - by Chris

  Last time I bought a new computer (I build them myself) I got a motherboard that had really poor linux support for a long time. Specifically the audio. I had to wait months before the kernel supported the on board audio chipset. That is exactly the situation I'm trying to avoid this time around. I have some specific questions about "server motherboards" actually. I looked at a few models of server motherboards by intel, and some random models on newegg. I wasn't able to see much of a difference from regular desktop motherboard other than most had two sockets, and support for much more ram. These boards seem more popular with Linux users. Why? AMD and Intel both have server CPUs as well. Some question, what's the difference? To make this question more concrete, I was looking at this this motherboard. The main questions about it that I can't answer are: Can I get a motherboard without on board raid and audio? I wanted to get a hardware raid controller and a PCI audio card. I thought a server motherboard would be cheaper and not have these "extras", since who wants an audio card on a server? Where can I found out about Linux support for the components on this board? "Intel ICH10R", "Realtek ALC889", "Marvell 88E8056" I'm buying this computer to work as a Linux desktop for a lot of compiling, coding and audio/video work, but I don't want to rule out the possibility of installing windows and playing some games at one point. (even if the last game I got has been sitting in its box unopened for almost a year). Is it a good idea to buy a "server motherboard" and play games on it, or are desktop boards better value for this? The ultimate solution for me would be a motherboard that had GPL divers for onboard LAN, a single CPU socket, lots of PCI express and PCI. USB 3.0, and no fancy hard disk controllers since I'll be getting a separate one.

  Read the article

• PHP/MySQL Performance Testing with Just PHP

  - by Mike Gifford

  I'm trying to diagnose a server where the website is loading very slowly, but unfortunately my client has only provided me with FTP access. I've got FTP access so I can upload PHP scripts, but can't set up any other server side tools. I have access to phpMyAdmin, but not direct access to the MySQL server. It is also unfortunately a Windows server (and we've been a Linux shop for over a decade now). So, if I wan to evaluate MySQL & disk speed performance through PHP on a generic server, what is the best way to do this? There are already tools like: https://github.com/raphaelm/php-benchmark or https://github.com/InfinitySoft/php-benchmark But I'm surprised there isn't something that someone has already set up & configured to just run through and do some basic testing of a server's responsiveness. Every time we evaluate a new server environment it's handy to be able to compare it to an existing one quickly to see if there are any anomalies. I guess I'd just hoped that someone else had written up a script to do this already. I know I have, but that was before Github when there was a handy place to post scraps of code like this. Originally posted in http://stackoverflow.com/questions/12321498/php-mysql-performance-testing-with-just-php but it was recommended that I re-post it here.

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" after about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason I put this in quotation marks is that it does not really freeze, as I you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading means, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. The fact that I can see navigate to applications but not use them might suggest a hard drive problem as well? Maybe I can access the stuff that is in RAM, but not anything that would require interaction with the drive.. Very appreciative of any help!

  Read the article

• Security and data backup for Ubuntu usb installation

  - by AMS949

  Due to encryption on my corporate laptop I opted to install Ubuntu 9.10 on a flash drive and just use it as my hard drive. I tried the vmware but it crashed my xp a couple of times. Now I have a couple of concerns since I am totally new to Ubuntu and Linux. First, would it be possible for me to transfer my installation to a new usb drive? I now have a 4gb and it may get filled up soon, I don't seem to be able to see my actual files when I browse the usb drive. I also tried copying all files from this usb to another and boot from it but that failed. Second, whenever the system boots up I am never prompted for a password, it is always the username ubuntu. Which I guess means if I lose my usb drive my data is open wide. Is there a way to secure it or to use users and groups as on a regular hard drive installation? As a background, I created this by going into a working Ubuntu installation, System - Administration - USB Starter Disk Creator (was that the right way to start with?) Thanks!

  Read the article

• RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

  - by Ed

  I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

  Read the article

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324  | Next Page >