Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 318/729 | < Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >

  • Networking issues with Linux server (CentOS 5.3)

    - by sxanness
    I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Networking issues with Linux server (CentOS 5.3)

    - by sxanness
    I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

    Read the article

  • Wireless on Medion MD96500 (Intel® PRO/Wireless 2200BG) running Windows 7

    - by Jakob Schmitt
    I just installed Windows 7 (32 bit) on a Medion MD96500 (Intel 2200BG Wireless Card) and then installed the Windows Vista (32 bit) driver. Now, in the "device driver window", the Wireless Card is listed as working/active. If I want to set up a wireless connection, however, I always get the error message "No connections available". Pushing the hardware-switch (or however that thing is called, right next to the keyboard) does not seem to have any effect.

    Read the article

  • How to debug Ubuntu/Cisco VPN issues

    - by Joe Casadonte
    I'm trying to connect an Ubuntu laptop (9.10) with some kind of Cisco VPN device; I don't know what's on the other end, and I'm not likely to find out exactly what. I know my company allows VPN from Linux clients because they provide one that I cannot get to install (it fails to compile). I've had the most luck with the network-manager-vpnc package, however I can't figure out what's failing. When I try to connect, I get this message from libnotify: The VPN connection 'XXX' failed. which is not very helpful. I've scoured the system logs and all I can find is this: Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.vpnc'... Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' started (org.freedesktop.NetworkManager.vpnc), PID 2672 Dec 27 12:57:45 jcasadon-lap NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.vpnc' just appeared, activating connections Dec 27 12:58:00 jcasadon-lap NetworkManager: <info> VPN plugin state changed: 3 Dec 27 12:58:00 jcasadon-lap NetworkManager: <info> VPN connection 'AmericasEast' (Connect) reply received. Dec 27 12:58:00 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/tun0, iface: tun0) Dec 27 12:58:00 jcasadon-lap kernel: [ 6144.529002] tun0: Disabled Privacy Extensions Dec 27 12:58:00 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/tun0, iface: tun0): no ifupdown configuration found. Dec 27 12:58:15 jcasadon-lap NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/tun0, iface: tun0) Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin failed: 1 Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin state changed: 6 Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> VPN plugin state change reason: 0 Dec 27 12:58:15 jcasadon-lap NetworkManager: <WARN> connection_state_changed(): Could not process the request because no VPN connection was active. Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> (wlan0): writing resolv.conf to /sbin/resolvconf Dec 27 12:58:15 jcasadon-lap NetworkManager: <info> Policy set 'Northbound Train' (wlan0) as default for routing and DNS. Dec 27 12:58:27 jcasadon-lap NetworkManager: <debug> [1261936707.002971] ensure_killed(): waiting for vpn service pid 2672 to exit Dec 27 12:58:27 jcasadon-lap NetworkManager: <debug> [1261936707.003175] ensure_killed(): vpn service pid 2672 cleaned up I have no idea where to go from here. Tomorrow I'll ask the IT/IS guys if there's anything they can tell me from their end, but I don't know if they'll be able to tell me anything. Any ideas? Thanks!

    Read the article

  • Virtual Microphone and skype.

    - by Dario
    Hello, I need to have at least one microphone on Windows to make Skype calls, but i have a VPS with Windows 2003 server with no audio device. I googled a lot and finally i found something called "Virtual Audio Cable", a tool to install virtual audio drivers ( http://software.muzychenko.net/eng/vac.html ). I tried many times but i couldn't get this driver work, so i'm asking if someone know a similar solution, i mean a virtual microphone or a way to make skype working without any microphone. Thanks all!

    Read the article

  • Will logging debugging incur a performance hit if I don't turn debugging on?

    - by romandas
    On a Cisco device, I know that enabling debugging can incur a performance hit since debugging has such a high priority on the CPU. I know that to log debugging, you have to set logging up to the debugging level (logging buffered 4096 debugging, for example) and also enable debugging on some feature. Does configuring the logging debugging incur the performance hit even if you don't enable debugging on some feature, or would it be safe (assuming you want and can handle all the logging events via syslog) to configure 'logging buffered 4096 debugging' to have maximum logging available if/when someone uses debug?

    Read the article

  • Macbook Pro - Randomly sleeps and won't wake up

    - by James
    All, I have a Macbook Pro 13" (mid 2009) that has had a long time issues which seems to be getting worse. Occasionally, I will go to wake the computer with the keyboard and can't wake it. The HDD spins up, the light on the front of the computer stops blinking, but as soon as it seems like the display should light up, the HDD stops and the light begins blinking again. More rarely, the computer will suddenly sleep while I am using it and then enters the same sleep loop. The only way to resume working on the computer is to wait. Doing a hard restart just puts it right back into the 'sleep loop.' Here is an excerpt from kernel.log showing the laptops apparent narcolepsy: Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: HID tickle 31 ms Jun 5 22:20:41 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:46 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:20:48 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:54 james-hales-macbook-pro kernel[0]: Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link DOWN Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity). Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: HID tickle 26 ms Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:21:02 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:21:08 james-hales-macbook-pro kernel[0]: I have tried reseting the SMC and reinstalling Lion (short of erasing and installing) to no avail. The Genius bar has insisted that the problem would be resolved by reinstalling Lion (which they did, but didn't fix anything, still insisting...). Please don't say "logic board." Thoughts?

    Read the article

  • Windows server 2008 R2 + VMWare Workstation 7.0

    - by G0RY
    Hi, im trying to install Windows 2008 R2 on VMWare, and I got this error: A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or usb flash drive, please insert it now. I was trying to install it from ISO, daemon and from DVD drive, but always get this error.

    Read the article

  • Android ActiveSync/Outlook Error

    - by Kyle B.
    Getting the following error when attempt to press "Refresh" inside the Mail app for an exchange server account. Using an Android 2.1 device (Evo). "Exchange email synchronization is disabled". I can send outbound messages, but new emails are not coming in. Anyone know what would cause this error? Thanks, Kyle

    Read the article

  • Powering-down USB Powered Devices on laptop sleep

    - by Carl
    I recently purchased a Targus Lap Chill Mat, which is a USB powered device, but doesn't have any interface/storage/etc function. I'd like it to power-down when my (macbook) laptop sleeps (since the fan obviously doesn't need to be running when the laptop is idle) without having to unplug it. Any suggestions?

    Read the article

  • All paths down on vSphere esxi 5.1, LSI 9211-8i

    - by user1434058
    Works 100% ESXi 5.1 HBA (LSI 1064e) 1x SAS2 100GB SSD Doesn't work ESXi 5.1 HBA (LSI 9211-8i IT /IBM M1015) 1x SAS2 100GB SSD After a few hours of heavy HD load i get: - Device or filesystem with identifier ['all drives'] has entered the All Paths Down state. - ESXi retries but loses connectivity to the SAS drive, marks it as "dead or error" - reboot fixes the issue How can i fix this issue?

    Read the article

  • dazzle DVC100 in live movie maker

    - by Jonathan
    How can I use the Pinnacle Dazzle (it is a USB device which lets you plug in a video player or other analogue source) with Windows live movie maker (because it is just simple and I don't need effects/editing etc) Or is there a way I can use it on my Macbook Pro? Jonathan

    Read the article

  • Use Sony HDR line of camcorders as webcam?

    - by mjmarsh
    I have a Sony HDR-XR200 HD camcorder. I'd like to see if I can use it as a webcam as well. It only has USB and HDMI outputs (no DV/firewire). Is there any way to make such a device function as a webcam on Windows Vista? Almost all camcorder-to-webcam software seems to work with DV inputs.

    Read the article

  • Use hard disk image like a regular hard disk on Linux

    - by jobnoorman
    If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk? By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,... (I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)

    Read the article

  • how to mount a partition inside a partition

    - by facha
    Hello, everyone I have a block device (/dev/sda5) that has been partitioned inside by a virtual machine. So, when I look inside with fdisk /dev/sda5, I see: sda5p1 sda5p2 and so on. Is it possible to mount them on my host system? Thanks in advance.

    Read the article

  • Autossh dies after time

    - by Justin
    My setup is Ubuntu 10.04 on AWS Autossh to create a tunnel for MySQL The tunnel is automatically created using Upstart (/etc/init/autossh.conf): respawn console none start on (local-filesystems and net-device-up IFACE=eth0) stop on [!12345] script #user/IP Address redacted exec autossh -M 20000 -o StrictHostKeyChecking=no -L 3306:127.0.0.1:3306 [email protected] end script On boot the tunnel is created, works great. After some random idle time it dies. Any thoughts on how to keep it alive? I don't know what's killing autossh.

    Read the article

  • AIX: iscsi volumes disappear after reboot

    - by Dan
    We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

    Read the article

  • I'm looking for a hebrew font

    - by Moshe
    I'm looking for a (preferably free) hebrew font that the letter ? ("Chet"/"Ches") is shaped like the upper half of the letter "s" and is not a script font. The letter ? (lamed) should be shaped like a printed one, not have a loop on the bottom. Thanks.

    Read the article

  • Can PPP CHAP authentication use Cisco "Type 5" MD5 passwords?

    - by romandas
    Looking over Cisco's documentation, and RFC 1994 (PPP CHAP authentication), my initial guess is "no", because CHAP requires a cleartext password to rehash every time it sends a challenge. Is this true? If so, is there another way to configure CHAP so it doesn't use the easily-decoded type 7 passwords? The Cisco device in question uses local authentication, not a TACACS+ or RADIUS server. Would using RADIUS eliminate the problem or just move it to the RADIUS server?

    Read the article

  • Lenovo Windows XP Reinstall Driver help

    - by Moshe
    I'm reinstalling Windows on an IBM Thinkpad T43. (Not T43p) I reinstalled the OS and now there a number of drivers that I need to reinstall. Any help would be appreciated. I've been to Lenovo's website. This would be a breeze but the Device Manager lists 2 Unknown devices. How do I figure out what those are?

    Read the article

  • Can I set up a separate RAID 5 devices?

    - by GregH
    I have a GIGABYTE GA-P55M-UD2 motherboard in my system (Windows 7 64 bit) and currently have a Western Digital SATA 10k RPM drive in it. Is it possible to add three more SATA drives to make a single RAID 5 device that is separate from the current 10k rpm drive that I have in it? Once I enable RAID for the SATA drives, I am not required to make all of the drives part of the RAID volume am I? I can have separate RAID'ed and non-RAID'ed volumes can't I?

    Read the article

  • Installing drivers for switchable graphics

    - by Anonymous
    I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

    Read the article

  • Dynamic DNS with Comcast

    - by colithium
    I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

    Read the article

< Previous Page | 314 315 316 317 318 319 320 321 322 323 324 325  | Next Page >