Search Results

Search found 18209 results on 729 pages for 'loop device'.

Page 319/729 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • BSOD - probably video card prob

    - by Shimmy
    I'm receiving the following BSOD: I've tried installing the latest driver from nVidia (296.10), but it says "NVIDIA installer cannot continue", "The graphics driver could not find compatible graphics hardware.": I installed it manually at device manager, but problem still occurs. The problem does not happen in safe mode at all. Note: After restarting the computer when seeing this BSOD, the BIOS welcome screen is full of random black dots spread around: Any solutions? Update: I've tried disabling Aero by following this guide, but that didn't help.

    Read the article

  • problem when view the super block in ext3 file system

    - by xuczhang
    I tried to view the superblock by command "dd" in ext3 file system. dd if=/dev/sda3 bs=4096 skip=1 count=1 of=superblock But the result in superblock file is not correct(I compare the value of Inodes count I got from dumpe2fs). The device file /dev/sda3 is started at the boot block and then the superblock of the group0? And another question is the boot block and superblock's size are both BLOCKSIZE(here is 4096)? The disk format of ext2/ext3(I think they are the same) are shown below:

    Read the article

  • Opensource Dns based incoming Load balancing ?

    - by sahil
    Hi, I am using Linkproof device for incoming load balancing based on which is based on dns. For example my linkprrof have 3 isp link.... it also act as a dns sevrer for my sites...so when someone connect me by using my dns name my linkprrof give them ip from 3 isp which ever is responding fast. so is there any same kind of open source solution for dns based incoming load balance is possible ??? sahil

    Read the article

  • Garmin Ant Agent USB sticks is not working on Windows 8

    - by VinnyG
    I have a garmin gps training watch that connect with Ant agent (http://www8.garmin.com/support/download_details.jsp?id=3741) but in my new install of windows 8 the USB drivers are not working anymore I get a device problem, I downloaded the latest drivers but it did not work. I also try to install it manualy but no more luck. I made a request to Garmin support but if some has a solution until they fix it, let me know!

    Read the article

  • does ipad support voice recording???

    - by Abdullah Waseer
    Hi, i have made an application in iphone which supports video recording and i want it to launch on iPad too but currently i dont know whether ipad device supports voice recording or not. can anyone please tell me whether IPAD SUPPORTS VOICE RECORDING??? thanks...

    Read the article

  • Assess BIOS on HP Pavilion xt966

    - by NitroxDM
    I'm attempting to change the boot device priority on a older HP. When it starts up it flashes a HP splash screen then just goes black with a blinking caret. I tried the suggestion of leaving it off for 5 sec then hitting F1. No dice. I'm using a USB keyboard. I might grab a PS2 and give it a go. Any other ideas?

    Read the article

  • SLES 10 Sp3 VMware tools error on install

    - by Elgreco
    I installed SUSE enterprise server 10 SP3 on a Esx 4 server The problem starts with the installation of vmware tools. "VmwareTools-4.0.0-193498.tar.gz" The tools wont start: Unable to start services for vmware tools Paravirtual ISCSI module: Failed Guest vmxnet fast network device: Failed. I fixed the guest vmxent ERROR by changing the NIC mode. any hint? i cant be the only one with the same problem..

    Read the article

  • What is the Apple Mikey HID Driver for?

    - by Ivan Vucica
    Cheers, does anyone know what component in Macbook identifies itself as "Apple Mikey HID Driver"? Joystick and Gamepad Tester detected my gamepad, the keyboard (with each key as a separate axis/button/whatever) and this mysterious device (with single axis/button identified as 'Page: 0x6, Usage: 0x22' which doesn't update). This is in white Unibody Macbook '09. Remark: While Googling for the component, I stumbled upon this mailing list post mentioning Apple IR?

    Read the article

  • how to disable remote wipe for Exchange 2010 ActiveSync?

    - by RMNVM
    When connecting android mobile devices to Exchange ActiveSync some require granting device administrator privileges which permit an exchange administrator to remotely wipe the phone. The warning messages are scaring some mobile users and turning them away from using Exchange ActiveSync altogether. How can I disable his functionality on Exchange Server 2010? [security breaches are not an issue here]

    Read the article

  • How to recover a file using the FAT cluster chain instead of using the stored length in the FAT table?

    - by cadrian
    I'm trying to recover movie files from my TNT receiver hard drive but it corrupts its FAT32 allocation table (crappy cheap device...) Using dosfsck is useless because the correct file length is the cluster length, not the (shorter) one in the table, and dosfsck only proposes to shorten the file, which I won't do. Question: how to recover a file using the FAT cluster chain instead of using the stored length in the FAT table? Edit I forgot to say: Linux solutions only please (I have no windows box)

    Read the article

  • Error while creating a VM using KVM

    - by Karan Gurnani
    I am trying to set up a VM on my Ubuntu 13.04 Desktop and it's giving me error when I try to start the VM. The error states: virsh # start vm1 error: Failed to start domain vm1 error: internal error process exited while connecting to monitor: W: kvm binary is deprecated, please use qemu-system-x86_64 instead char device redirected to /dev/pts/2 (label charserial0) qemu: at most 2047 MB RAM can be simulated What is the workaround for this, if any?

    Read the article

  • Networking OSX 10.6 and Vista via ethernet?

    - by Moshe
    How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

    Read the article

  • Linux Mint Wireless doesn't connect

    - by guisantogui
    I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks. EDIT: The last piece of the logs: Oct 5 00:22:38 gsouza-host ntpd[2116]: peers refreshed Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): bringing up device. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: nl80211: 'nl80211' generic netlink not found Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: Failed to initialize driver 'nl80211' Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN soft blocked Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi hardware radio set enabled Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> WiFi now enabled by radio killswitch Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: starting -> ready Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20 30 42] Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <info> (wlan0): supplicant interface state: ready -> inactive Oct 5 00:22:42 gsouza-host NetworkManager[2019]: <warn> Trying to remove a non-existant call id. Oct 5 00:22:42 gsouza-host wpa_supplicant[2055]: rfkill: WLAN unblocked Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::7ae4:ff:fe4a:13a9. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: New relevant interface wlan0.IPv6 for mDNS. Oct 5 00:22:44 gsouza-host avahi-daemon[1827]: Registering new address record for fe80::7ae4:ff:fe4a:13a9 on wlan0.*. Oct 5 00:22:46 gsouza-host ntpd[2116]: Listen normally on 7 wlan0 fe80::7ae4:ff:fe4a:13a9 UDP 123 Oct 5 00:22:46 gsouza-host ntpd[2116]: peers refreshed

    Read the article

  • How to scan local network (LAN) for connected devices (Mac OS)

    - by smotchkkiss
    I'm basically looking for something like this but available on Mac. I am trying to connect a new workstation to our wireless multifunction printer and I'm having a hell of a time getting the device to spit out an IP for me to connect to. Is there a way I can scan the network somehow? If it makes a difference, the new workstation is using Mac OS X 10.6 Thanks in advance :)

    Read the article

  • An alternative to Google Talk, AIM, MSN, et al [closed]

    - by mkaito
    I'm not entirely sure whether this part of stack exchange is the most adequate for my question, but it would seem to me that people sharing this kind of concern would converge either here, or possibly on a more unix-specific sub site. Either way, here goes. Background Feel free to skip to The Question, below. This should, however, help those interested understand where I'm coming from, and where I expect to get, messaging-wise. My online talking place-to-go has been IRC for the last fifteen years. I think it's a great protocol, and clients out there are very good. I still use, and will always continue to use IRC for most of my chat needs. But then, there is private instant messaging. While IRC can solve this with queries and DCC chats, the protocol just isn't meant to work too well on intermittent connections, such as a mobile device, where you can often walk around places with low signal. I used MSN for a while, but didn't like it. The concept was awesome, but I think Microsoft didn't get the implementation quite right. When they started adding all that eye candy, and my buddies started flooding me with custom icons and buzzing my screen to it's knees, I shut my account and told folks that missed me to just email or call me. Much whining happened, I got called many weird things for not using MSN, but folks eventually got over it. Next, Google Talk came along, and seemed to be a lot better than MSN ever was. The protocol was open, so I could use whatever client I felt a fancy for. With the advent of smart phones, I just got myself a gtalk client on the phone, and have had a really decent integrated mostly-universal IM solution. Over the last few months, all Google services have been feeling flaky. IMs will often arrive anywhere between twenty minutes and one hour after being sent, clients will randomly disconnect, client priorities seem to work sometimes, and sometimes just a random device of those connected will get an IM. I think the time has come to look for greener grass. The Question It's rather hard to put what I'm looking for into precise words. I guess I just want something that is kind of like MSN/Gtalk, but that doesn't let me down when I need it. IRC is pretty much perfect, but the protocol just isn't designed to work well on mobile devices. Really, at this point I'm considering sticking to IRC for desktop messaging, and SMS/email on the phone, but I hope that in this day and age there is something better out there.

    Read the article

  • Enforce using proxy in all browsers

    - by Petr Marek
    I've configured squid with squid with squidguard and when using proxy in browser it works fine. But I want to enforce using proxy (probably in iptables) in all browsers. Now it can be disabled in the browser settings by user. My setup is: one standalone pc with ubuntu running the squid and squidguard and on this very same device I want to somehow enforce using the proxy. Squid conf file has set: http_port 3128 transparent THX

    Read the article

  • How can I filter packets from a port monitor?

    - by engineerchuan
    I have some data going from Point A to Point B. I have a SPAN monitor set up to a monitoring device C. To recreate some real world scenarios, I want to filter out all traffic which is a certain type (H.323 VoIP Signaling Packets) so that C sees a subset of the information that is flowing from A to B. What would the easiest way to do this be? I assume I would need a computer with 2 NIC cards and some software to examine each packet and chuck out the H.323 VoIP packets? Thanks!

    Read the article

  • NTPD seems to delete all network interfaces

    - by Aurelin
    We have a couple of virtual interfaces configured on eth0 on a CentOS, and every now and then, they went down seemingly out of the blue. Now after going through the log files, I found out that apparently ntpd deletes all eth0 interfaces, and that dhclient automatically brings eth0 back up. The virtual interfaces, however, stay down which causes several of our websites to be inaccessible. Can someone explain to me why ntpd deletes interfaces? Can / should that be turned off, or can / should I configure dhclient to bring the virtual interfaces back up automatically, too? EDIT// The log files that I should've posted : Nov 12 13:10:28 raptor dhclient[20048]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x6a825e97) Nov 12 13:10:42 raptor dhclient[20048]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 (xid=0x24554092) Nov 12 13:10:42 raptor dhclient[20048]: DHCPOFFER from 96.126.108.78 Nov 12 13:10:42 raptor dhclient[20048]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x24554092) Nov 12 13:10:42 raptor dhclient[20048]: DHCPACK from 96.126.108.78 (xid=0x24554092) Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #31 eth0, 50.116.50.97#123, interface stats: received=3255, sent=3256, dropped=0, active_time=1559394 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #32 eth0:0, 50.116.53.56#123, interface stats: received=3, sent=0, dropped=0, active_time=1559391 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #33 eth0:1, 66.175.211.192#123, interface stats: received=2, sent=0, dropped=0, active_time=1559389 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #34 eth0:2, 50.116.53.95#123, interface stats: received=3, sent=0, dropped=0, active_time=1559387 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #35 eth0:3, 97.107.132.32#123, interface stats: received=2, sent=0, dropped=0, active_time=1559385 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #36 eth0:4, 50.116.56.201#123, interface stats: received=2, sent=0, dropped=0, active_time=1559383 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #37 eth0:5, 66.175.212.121#123, interface stats: received=2, sent=0, dropped=0, active_time=1559381 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #38 eth0:6, 66.175.215.137#123, interface stats: received=2, sent=0, dropped=0, active_time=1559379 secs Nov 12 13:10:44 raptor NET[1573]: /sbin/dhclient-script : updated /etc/resolv.conf Nov 12 13:10:44 raptor dhclient[20048]: bound to 50.116.50.97 -- renewal in 32692 seconds. Nov 12 13:10:45 raptor ntpd[2109]: Listening on interface #39 eth0, 50.116.50.97#123 Enabled The eth0 config : DEVICE="eth0" ONBOOT="yes" BOOTPROTO="dhcp" IPV6INIT="no" IPADDR=50.116.50.97 NETMASK=255.255.255.0 GATEWAY=50.116.50.1 And the virtual interfaces (I posted the first one only, they look the same for the most part) : # Configuration for eth0:0 DEVICE=eth0:0 BOOTPROTO=none # This line ensures that the interface will be brought up during boot. ONBOOT=yes # eth0:0 IPADDR=50.116.53.56 NETMASK=255.255.255.0

    Read the article

  • SBS 2003 Event ID 3005 (ActiveSync Related)

    - by lance-gallant
    I've recently noticed the following Error in my Server logs. Happens whenever Mobile device user attempts to syncrhonise using OMA. The error is logged on the server, but the user is able to sync, albeit slowly. Event Type: Error Event Source: Server ActiveSync Event Category: None Event ID: 3005 Date: 16/03/2010 Time: 01:22:20 PM User: xxxxxx Computer: xxxxxx Description: Unexpected Exchange mailbox Server error: Server: xxxxxx User: xxxxxx HTTP status code: [409]. Verify that the Exchange mailbox Server is working correctly.

    Read the article

  • Opensuse on Acer Aspire One AOA 150

    - by iceman
    Has anyone managed to get Opensuse (any version) with KDE3 running on Acer Aspire One AOA 150 with all the device drivers? References: http://en.opensuse.org/Live_USB_stick http://news.opensuse.org/2009/01/09/unofficial-kde-35-live-cd-for-opensuse-111/

    Read the article

  • On Windows how can I prevent login until a software package has been installed?

    - by Phil Hannent
    I have an MSI which is configured for machine level installation because it is a device driver. I can deploy it via Active Directory and Group Policy just fine. However on a newly booted machine a user can login before the installation has a chance to complete and I get an warning in the event log saying it couldn't complete and will be tried at next reboot. How can I make the login screen wait for the installation to be completed?

    Read the article

  • Ubuntu hardy to intrepid upgrade hung on starting bluetooth

    - by srboisvert
    I have no bluetooth. Preliminary googling indicates that is probably an issue with some usb devices. I had an external drive, a mouse and a network dongle attached. It is just stalled during the Installing the Upgrades phase - the last commands were "Creating device nodes" Cancel will leave the system in a broken state. What next?

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >