Search Results

Search found 11050 results on 442 pages for 'video cards'.

Page 319/442 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • Expresscard Not Detected in PCI-E Adapter

    - by maxpower47
    I'm trying to put an expresscard TV tuner (Avermedia HC82) into my HTPC using this expresscard to PCI-E adapter. I've verified that the tuner works fine in my laptop. The motherboard is a Biostar TF7050-M2. When I install it and turn it on, the light on the back of the adapter comes on fine (there are two indicator lights on the back to show if it is using PCI-E or USB communication, USB communication goes through a USB cable connected between the card and a header on the motherboard) showing that it is working in PCI-E mode. However, the device is never detected in Windows 7 Professional x64. The auto detect never happens, it doesn't show up in the device manager, and I can have it rescan for new hardware and nothing is found. I tested the whole setup (tuner + adapter) in another PC (also using Win 7 Pro x64) and it worked fine. I also tried: Plugging the adapter in to the PCI-E x16 slot on the motherboard (I verified first that the x16 slot worked by installing a video card in it) Booting into safe mode and rescanning Updating the chipset drivers Installing the tuner drivers first Using a different USB cable, plugged in to one of the known good ports on the back of the board Trying it without the USB cable plugged in Removing the other PCI cards that were installed on the board Looking through the BIOS for any setting that might be disabling it somehow to no avail. I'm at a loss for what else to try. I really don't want to RMA it (the shipping back to newegg will be almost as much as it cost to buy in the first place. Any ideas?

    Read the article

  • Window Server 2003 Print spooler

    - by mikenardone
    Hello Everyone in ServerFault, I am new to this website. I have been coming here to fix my own problems. I believe everyone here on this website is great. I could not find this issue anywhere. I am sure that other people had this issue. I have IBM X3850 48GB ram 2 TB of hard drives, four NIC cards. 2 Xeon 1.7 CPU. I am running VMware ESX. I believe that was the paid version if not then it is ESXI. I have 7 Servers on this server. All Window server 2003. On one of the Servers I keep on getting CPU is at 100% . So when I go into task manager and look at the processes that is going on, it is my print spooler. I have 30 different HP laserjet printers and two copiers from HP. I believe it is an driver issue, but I can't figure with one is doing this. Is there any programs for window server 2003 that finds bad print drivers.

    Read the article

  • Tiny MCE + Flash

    - by matthewb
    I am attempting to use tiny mce to insert a flash video from youtube. I have the media plugin installed and working from what I can tell but when I view the page http://philadelphia.cities2night.com/articles/show/article/105/arthur-kade-runs-into-stewart-bradley-starting-star-linebacker-for-the-philadelphia-eagles-and-talks-about-fashion-show-he-s-hosting I see the object tags. Is this a issue with the plugin?

    Read the article

  • Is there any tutorial on connecting .NET 4 Pipeline with Pipeline from some C\C++ programm?

    - by Ole Jak
    Is there any tutorial on connecting .NET 4 Pipeline with Pipeline from some C\C++ programm? For example how to get data from VLC Pipeline output ... I mean VLC docs say that there command line args can eat name of pipe like YUV video output --yuv-file=<string> How to give such name to pipe created in your .Net programm so to be able to give it to other programms or resive from other programms?

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • Flash Loaded Issue

    - by dragon
    I had dynamically create one Flash Player cs2, i had upload into my site, no of url link i had provided on my aspx page, when any one of the url is clicked,that url based flv viedeo will play..! In my case when i clicked url to play the video,player is loaded but is not visible, in the same window, but i had opened in new window in internetexploer it will playing..working fine? What the problem in open the player in same window... any one pls help me..? Thanks

    Read the article

  • Scraping data from Flash (Games)

    - by awegawef
    I saw this video, and I am really curious how it was performed. Does anyone have any ideas? My intuition is that he scraped pixels from the screen (one per 'box'), and then fed that into some program to determine the next move. Is scraping pixel-by-pixel the way to do this, or is there a better way? I am looking to do something similar with either Java or Python. Thanks

    Read the article

  • Driver denied access to PCI card

    - by Corin
    Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

    Read the article

  • embed youtube custom playlist name

    - by John Stockton
    I found a nice article: http://911-need-code-help.blogspot.com/2012/07/youtube-iframe-embeds-video-playlist-and-html5.html I am using the last option (Custom Playlist). But how to edit the embed code: <iframe width="560" height="315" src="http://www.youtube.com/embed/T0Jqdjbed40?playlist=SyoA4LXQco4,6l6PPvUhR4c" frameborder="0" allowfullscreen></iframe> in order to show my playlist name above thumbinails? i tried to add listname="name", name="name", list="name" but it don't work

    Read the article

  • How to reduce cpu and ram usage?

    - by Hellboy
    i am going to "read" (video/big) files from server (shared environment) to clients (webbrowsers) via php and would like to know first if there is a way to reduce cpu and ram usage somehow (as i have those limited). thanks.

    Read the article

  • Custom YouTube Player

    - by Tony
    Hi, Is it possible to hide the video content of the YouTube player (only statusbar (where is play button etc.) is visible) ? Or maybe do you know other (flash) players that have the ability to stream the YouTube movies ?

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • linux routing issue

    - by Duc To
    Hi! I have 2 linksys routers which has linux running on it and using tomato firmware.. both has internet lines plugged on but only 1 acts as DHCP server (router 1) What I am having to achieve is that all packets goes to router 1 from internal IPs want to access internet will go out to that internet line but from 1 specific port, if router 1 detects packets from a specific source port (for ex: http port: 80), it will redirect that packet to router 2 and goes out to the internet from there.. I have found some documents which give solution that I will need a linux servers with 2 ethernet cards and then we plug both internet lines on that server and routing base on it but I do not want to do that because my boss does not want to have an extra work mantaining that server, besides, he says that the router itself already a linux one so why.. I tend to agree his points.. Can it be done or a seperate linux server acting as a router is a must? Thank you all in advance and really look forward in your replies.. I am newbie to linux network and it seems to be something out of my capacity to solve :( Your sincerely! Duc To

    Read the article

  • No sound out of headphone port on laptop

    - by Thanatos
    I cannot get sound out of the headphone port on a laptop. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller Some edits: Yes, the headphones are in all the way. This works in Windows: You plug headphones in, the internal speakers stop making noise, and noise comes out the head phones. Windows says I only have two sound cards: the HDMI port (which I don't care about) and the "sound card", which it claims is a "Conexant Pebble High Definition SmartAudio" In Windows, both the internal speakers and the headphone jack show up as one soundcard, which in my experience, is typical. (This is a laptop)

    Read the article

  • Visual Studio Web Testing - Are there any good books/videos available?

    - by JP
    Hello, I am trying to find a good resource on web and load testing. I'm using Visual Studio 2010 ultimate and, while i'm sure it is too early for much material to be released, i'm hoping there are some good resources for Visual Studio 2008 that are still relevant. While MSDN has some good information I'm looking for something more cohesive that i can view on my way to/from work - hence a book or a video Thanks in advance, JP

    Read the article

  • How to debug c++ DirectShow filter

    - by Mr Bell
    What debugging tools are available for directshow filters? Presently, I have a project that compiles and registers a video source filter that I then setup a graph in GraphEdit. I am using c++ in visual studio 2008. Is it possible to get a debugger attached to the filter in any way where I could set break points, inspect variables, etc? Barring that is there a way to log diagnostic information somewhere that I can view in real time?

    Read the article

  • Is it possible to see computer scheem from programm?

    - by Ole Jak
    So I want to see all the computer scheem like (for ex motherbord, how it is connected to video card) what parts of it are used and how data fluws between them how they are connected where is any thing going wrong or beter than expected. For any computer configuration. Is there any lib or sdk for working with such.. such data?

    Read the article

  • Switching from Onboard intel to Nvidia Dedicated GPU

    - by Anarkie
    How can I switch from Intel onboard grpahics to Nvidia Dedicated GPU? When I go to windows screen resolution I see intel. I cant change it. I go to Device Manager, I see both Adapters are there and Nvidia is known.I disabled intel, I didnt see any option to set one as primary so I disabled intel, black screen!Reboot and re-enable intel. I right click on the desktop, choose "Nvidia Control Panel" and on 3D options I chose the desired game I want to play, High performance Nvidia, but it didnt switch when I started the game. Then I made preferred GPU in the global settings High performance Nvidia for everything it still didnt change.I understand to save the battery etc. there is a switch option between these two but I dont see this switch when it is necessary, I cant also switch manually?Is there a manual switch FN key?I looked but couldnt find. Why I want to do this? 1) Better game peformance. 2) I want to play an old game from 2002(Diablo 2 LOD), when I start the game there are black bars on the sides, so screen becomes just smaller which I dislike!I heard this is intel's specification to center the display.But instead I would like to scale or expand it to fit widescreen(fullscreen).Which should be possible with Nvidia. My Notebook Specs: Fujitsu Lifebook AH531, Win7 , 64 bit, i5, intel HD graphics onboard, Nvidia GT 525. I didnt install Nvidia later, it was always installed and ready from the moment I turned on the computer first time. How I determined that the cards werent switched when I am playing the game: with the windows key I exited from the game, then looked at screen resolutions menu, still saw intel, also the game was still with black bars.I know intel GPU should enough for Diablo 2 but I am interested in this answer for further games, I dont always play Diablo, what if I install an up to date game for example?Then Intel will not be sufficient.I would like to learn the switch option.

    Read the article

  • Is there a way to split a widescreen monitor in to two or more virtual monitors?

    - by Mike Thompson
    Like most developers I have grown to love dual monitors. I won't go into all the reasons for their goodness; just take it as a given. However, they are not perfect. You can never seem to line them up "just right". You always end up with the monitors at slight funny angles. And of course the bezel always gets in the way. And this is with identical monitors. The problem is much worse with different monitors -- VMWare's multi monitor feature won't even work with monitors of differnt resolutions. When you use multiple monnitors, one of them becomes your primary monitor of focus. Your focus may flip from one monitor to the other, but at any point in time you are usually focusing on only one monitor. There are exceptions to this (WinDiff, Excel), but this is generally the case. I suggest that having a single large monitor with all the benefits of multiple smaller monitors would be a better solution. Wide screen monitors are fantastic, but it is hard to use all the space efficiently. If you are writing code you are generally working on the left-hand side of the window. If you maximize an editor on a wide-screen monitor the right-hand side of the window will be a sea of white. Programs like WinSplit Revolution will help to organise your windows, but this is really just addressing the symptom, not the problem. Even with WinSplit Revolution, when you maximise a window it will take up the whole screen. You can't lock a window into a specific section of the screen. This is where virtual monitors comes in. What would be really nice is a video driver that sits on top of the existing driver, but allows a single monitor to be virtualised into multiple monitors. Control Panel would see your single physical monitor as two or more virtual monitors. The software could even support a virtual bezel to emphasise what is happening, or you could opt for seamless mode. Programs like WinSplit Revolution and UltraMon would still work. This virtual video driver would allow you to slice & dice your physical monitor into as many virtual monitors as you want. Does anybody know if such software exists? If not, are there any budding Windows display driver guru's out there willing to take up the challenge? I am not after the myriad of virtual desktop/window manager programs that are available. I get frustrated with these programs. They seem good at first but they usually have some strange behaviour and don't work well with other programs (such as WinSplit Revolution). I want the real thing!

    Read the article

  • Wired to wireless bridge in Linux

    - by adrianmcmenamin
    I am attempting to set up my Raspberry Pi as a bridge (but I think this is not a question specific to the hardware) - using Debian wheezy. I have a hostapd.conf: (some details changed for security)... interface=wlan0 bridge=br0 driver=nl80211 auth_algs=1 macaddr_acl=0 ignore_broadcast_ssid=0 logger_syslog=-1 logger_syslog_level=0 hw_mode=g ssid=MY_SSID channel=11 wep_default_key=0 wep_key0=MY_KEY wpa=0 (yes, I know WEP is no good) And this in /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp auto br0 iface br0 inet dhcp bridge-ports eth0 wlan0 Everything seems to come up ok, but I cannot associate with the bridged wireless connection - even though the flashing lights on the USB stick suggest packets are being exchanged. I have read somewhere that not all cards/devices will run in hostap mode - they won't pass packets in one direction: is that right? (The info was a bit old)- this my card: [ 3.663245] usb 1-1.3.1: new high-speed USB device number 5 using dwc_otg [ 3.794187] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.804321] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.816994] usb 1-1.3.1: Product: USB2.0 WLAN [ 3.823790] usb 1-1.3.1: Manufacturer: ATHEROS [ 3.830645] usb 1-1.3.1: SerialNumber: 12345 So, what have I got wrong here?

    Read the article

  • Remove newlines and spaces

    - by Cosmin
    How can I remove newline between <table> .... </table> and add \n after each ex: <table border="0" cellspacing="0" cellpadding="0" width="450" class="descriptiontable"><tr> <td width="50%" valign="top"> <span class="displayb">Model Procesor:</span> Intel Celeron<br><span class="displayb">Frecventa procesor (MHz):</span> 2660<br><span class="displayb">Placa Video:</span> Intel Extreme Graphics 2<br><span class="displayb">Retea integrata:</span> 10/100Mbps, RJ-45<br><span class="displayb">Chipset:</span> Intel 845G<br> </td> <td width="50%" valign="top"> <span class="displayb">Capacitate RAM (MB):</span> 512<br><span class="displayb">Tip RAM:</span> DDR<br> </td> </tr></table> and become : <table border="0" cellspacing="0" cellpadding="0" width="450" class="descriptiontable"><tr><td width="50%" valign="top"><span class="displayb">Model Procesor:</span> Intel Celeron<br><span class="displayb">Frecventa procesor (MHz):</span> 2660<br><span class="displayb">Placa Video:</span> Intel Extreme Graphics 2<br><span class="displayb">Retea integrata:</span> 10/100Mbps, RJ-45<br><span class="displayb">Chipset:</span> Intel 845G<br></td><td width="50%" valign="top"><span class="displayb">Capacitate RAM (MB):</span> 512<br><span class="displayb">Tip RAM:</span> DDR<br></td></tr></table>\n s.

    Read the article

  • Are there any GOOD Chef, Chef-Server and Chef-Client tutorials out there?

    - by btelles
    Hi there, Chef from Opscode seems to be really useful for configuring servers and such, but trying to follow their documentation is a little difficult. Some terms are defined after they are used, and definitions sometimes reference new terms that you haven't yet encountered. Anyone know of any GOOD tutorials/walk-throughs for getting a good understanding of Chef, Chef-Server and Chef-Client? I remember seeing one video presentation online, but it barely scratched the surface.

    Read the article

  • CSS + .MOV Object

    - by Naz
    Hello all, I've created a page that uses jquery to slide from left to right displaying content in the middle of the page, everything around the centre is hidden via "overflow: hidden" which works a charm, until I embedded via the tags a quicktime video, it isn't hidden / it is always visible. I have no idea why this is happening and would love to get help on this! Cheers in advance!! http://twitter.com/_naz http://nazimjamil.com

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >