Search Results

Search found 5420 results on 217 pages for 'auxilliary storage'.

Page 32/217 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Thoughts on home NAS server

  - by user826955

  I currently have a NAS with a 2x2TB HDD 1x16GB SSD layout on a mini-itx atom board. The NAS is in a Lian Li PC-Q07 case. On this system I was running freebsd 8 with a gmirror raid 1 setup, which was enough for my needs. So far I was using the NAS for: Fileserver with AFP protocol (only mac clients used) SVN server hosting all my source trees of my projects JIRA (performance was okay-ish) Timemachine backup for the macs The power consumption was about 38W, although I did not put HDDs asleep when unused (I think this is not possible in a raid setup). I liked the NAS because: the performance was good through gigabit LAN (enough for my needs) power consumption was good its a pretty small case and fits in one of my cupboards I disliked the NAS a bit because: it was a bit noisy, the Q07 case vibrated a good amount because of the HDDs. I switched the NAS off every evening I do not have a real backup of the data on the NAS, only the internal raid 1 as safety. I really dont want to loose my source trees under no circumstances, so I would really be sleeping better if I knew I had regular backups somewhere. Recently, the board seemed to have died, I can't boot anymore. Thus, I was thinking about a redesign of my NAS (I still have to find out what parts are broken, I probably need to replace the mainboard and SSD. HDDs seem to be okay). First of all, I was wondering what other users have as backup for their NAS? Are you actually using a second NAS, and regularly copying over the data to have it safe? Or is there any better solution to this? I was thinking about getting a cheap NAS like the synology DS112j with only one disk, and use rsync or something similar to regularly copy data over to the second NAS (wake the second NAS upon start, shut it down after copy). Although this approach seems somewhat weird, It would have the benefit (?) that I could use a single disk instead of raid in the main NAS, and put the disk asleep when idle, and have the NAS running 24/7 with low energy consumption (I found no way to do this with a gmirror setup). Is there any recommended backup solution for a small NAS? Then I was thinking about a different raid setup. Since I have to buy a new mainboard as well as SSD, I might as well switch over to a i3 board with more ram, and also switch to ZFS. I am not familar with ZFS, I've never used it, but I read and hear much about it. Would it be viable to set up a ZFS storage with only 2 disks? Can I easily extend this storage with more disks, once I choose to add some? I could maybe get a new case like the Fractal Design Array R2 which has more 3,5" slots. I could as well get another 2 disks, but I would prefer sticking with the existing 2 for enegery/heat/noise reasons. Should I go for a ZFS storage or stick to my gmirror setup? I would also like to keep freebsd as operating system, and also I dont need any web gui or something (that is, I dont need/want to use FreeNAS or Openfiler etc). Does anyone maybe have a sample setup in use so I can compare energy consumption/noise/software setup? Any guidance towards the NAS of my dreams (silent, low energy, safe w/ backups) much appreciated.

  Read the article

• Plug and Go NAS Storage

  - by graham.reeds

  My wife and I are separating. One of the things we need to extricate is the media we have accumulated over the years. So I am looking for a NAS solution that is a) relatively low-cost, b) reliable and c) easy for a non-geek to use (I don't want to be tech support). All it needs to do is hold our iTunes library, photos, course work and maybe some movies and TV shows that I currently have. She will be connecting via her Netbook. I have seen this thread but the reviews on Amazon aren't particularly favourable. Due to the need for simplicity, WHS and FreeNAS are none-starters. I need redundancy as if a single drive system was to die then she would lose her course work and photos. Is the ReadyNAS the only real solution out there?

  Read the article

• Adding extra storage space to Dell PowerEdge 2900 SQL server

  - by Owl

  Can a 300GB 15K RPM SAS (Serial Attached SCSI) Hard Drive work/be configured if i put it in an extra slot on a server that uses a DELL PERC 6/i Integrated RAID Controller?

  Read the article

• Long-term backup storage media

  - by Dimitri C.

  Rumors say CDs and DVDs won't remember your data longer than ten years. Are there backup media that do better?

  Read the article

• How Is A SAN Storage Device Managed? [closed]

  - by slickboy

  Apologies if this is a stupid question but my only previous experience with SAN technology is using a SAN virtualisation tool (StarWind iSCSI SAN Free). This tool comes with a management interface that allows for iSCSI targets to be configured on the simulated SAN that can then be accessed. My question is basically: How is physical SAN device managed? Is an operating system required to be installed on the SAN device and then managed via software? Or can it be managed remotely via an application with no OS on the device? Thanks for any help.

  Read the article

• Tape vs SSDs backups regarding long-term storage reliability

  - by user66131

  My question is very specifically about solid state drives, not regular hard drives. I would like to put in place a grandfather-father-son backup scheme, with the SSDs being used for the grandfather and father portions, and the yearly grandfather would be locked in a safe offsite for maybe 5-10 years. Can I expect that after this period of time the data would be preserved as well as it would be on a tape?

  Read the article

• Distributed storage and computing

  - by Tim van Elteren

  Dear Serverfault community, After researching a number of distributed file systems for deployment in a production environment with the main purpose of performing both batch and real-time distributed computing I've identified the following list as potential candidates, mainly on maturity, license and support: Ceph Lustre GlusterFS HDFS FhGFS MooseFS XtreemFS The key properties that our system should exhibit: an open source, liberally licensed, yet production ready, e.g. a mature, reliable, community and commercially supported solution; ability to run on commodity hardware, preferably be designed for it; provide high availability of the data with the most focus on reads; high scalability, so operation over multiple data centres, possibly on a global scale; removal of single points of failure with the use of replication and distribution of (meta-)data, e.g. provide fault-tolerance. The sensitivity points that were identified, and resulted in the following questions, are: transparency to the processing layer / application with respect to data locality, e.g. know where data is physically located on a server level, mainly for resource allocation and fast processing, high performance, how can this be accomplished? Do you from experience know what solutions provide this transparency and to what extent? posix compliance, or conformance, is mentioned on the wiki pages of most of the above listed solutions. The question here mainly is, how relevant is support for the posix standard? Hadoop for example isn't posix compliant by design, what are the pro's and con's? what about the difference between synchronous and asynchronous opeartion of a distributed file system. Though a synchronous distributed file system has the preference because of reliability it also imposes certain limitations with respect to scalability. What would be, from your expertise, the way to go on this? I'm looking forward to your replies. Thanks in advance! :) With kind regards, Tim van Elteren

  Read the article

• Can MySQL use multiple data directories on different physical storage devices

  - by sirlark

  I am running MySQL with its data dir on a 128Gb SSD. I am dealing with large datasets (~20Gb) that are loaded and processed weekly, each stored in a separate DB for the purposes of time point comparisons. Putting all the data into a single database in unfeasible because the performance on such large databases is already a problem. However, I cannot keep more than 6 datasets on the SSD at a time. Right now I am manually dumping the oldest to much larger 2Tb spinning disk every week, and dropping the database to make space for the new one. But if I need one of the 'archived' databases (a semi regular occurrence) I have to drop a current one (after dumping), reload it, do what I need to, then reverse the results. Is there a way to configure MySQL to use multiple data directories, say one on the SSD and one on the 2Tb spinning disk, and 'merge' them transparently? If I could do this, then archiving would no longer mean "moved out of the database entirely", but instead would mean "moved onto the slow physical device". The time taken to do my queries on a spinning disk would be less than that taken to completely dump, drop, load, drop, reload two entire databases, so this is a win. I thought of using something like unionfs but I can't think of a way to control which database gets stored on which physical drive, because it works by merging on a directory level (from what I understand) so I'm still stuck with using multiple directories. Any help appreciated, thanks in advance

  Read the article

• Not enough storage is available to process this command

  - by Mohit

  I am getting this error on almost all of the operations on a Windows 7 pro 32 bit machine. By operations I mean anything I do. Update a repo from subversion. Access a local IIS Site. Copy a big folder. Run an installer.and sometime if I try again. It get solved. I think there is something wrong wit windows7 . I searched around and found posts suggesting to increase IRPStackSize value in registry I did that no Luck. I am using Microsoft Security Essentials Version: 1.0.1961.0 as my antivirus package Once this errors starts popping up. I have to restart and then in after some random time. It starts showing up again. Any help is appreciated. I am losing lot of my time in restarting my system or retrying again and again.

  Read the article

• migrating storage to a different controller

  - by bellocarico

  Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

  Read the article

• Data transfer speed to USB storage connected to wifi router very slow

  - by RonakG

  Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

  Read the article

• Storage of various linux config files

  - by stantona

  I'm using git to track/store all my various config files required for linux. They're organized as if they live in my home directory, eg: .Xresources .config/ Awesome rc.lua .xmodmap .zshrc vim/ <- submodule emacs/ <- submodule etc I use git submodules for other things like vim/emacs configuration (since I also want to keep those separate repos). I'm thinking of creating a shell script to create the various links to these files. The goal is to make it easier to setup another linux painlessly. Is this a reasonable idea? Is there a preferred approach? I'm mostly interested in hearing how others people store their configs.

  Read the article

• Installing windows xp from a removable storage

  - by objectiveME

  Hello,i want to install windows xp from my flash disk but upon running DISKPART and LIST PART my flash disk is not being listed.I soon find out its not supported on another forum.I tried unet bootin but i dont want to go that route.I have learn't that i can make my flash disk appear a hard drive but i am not sure since i have never done this before. I am following this tutorial: http://www.intowindows.com/how-to-install-windows-7-rc-on-acer-aspire-one-netbook/ If i present a usb stick as a hard drive,will i be able to install xp now?.

  Read the article

• Running RAID on an internal storage drive

  - by Johnny W

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• Linux data storage and partitioning

  - by Rajeev

  In the following output of df -h you can see that i have added a new hard drive(/dev/hdd1) and have mounted as /hdd1. My question is if I start dumping data to /opt will that data be mounted in /hdd1 or / My goal is to utilise the new hdd1 instead of old disk(/dev/sda3). How can this be done? Filesystem Size Used Avail Use% Mounted on /dev/sda3 442G 312G 12G 86% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 57M 128M 31% /boot /dev/sdb1 1.7T 201M 2.6T 1% /hdd1

  Read the article

• E2K7: Can't add jounaling mailbox to storage group

  - by Agent

  We just added a new SG to a standalone E2K7 server but Exchange pops an error when we try to enable journaling on it. The journal recipient mailbox was created a while back and as far as we can tell there are no issues with it. It's viewable in the GAL and accessible through OWA. The error is: Set-Mailboxdatabase Error:Obkect "domain.company.com/Journaling/Journal5" could not be found. Please make sure that it was spelled correctly or specify a different object. This Journal5 account is in a child domain (like all the other journaling mailboxes we have attached to other mailbox server SGs). We also tried attaching one of the working journaling mailboxes to this SG but they also popped back the same error. Event log is now showing any errors at all. We are running SP1 on this server. I've tried dismounting/remounting the store and bouncing the IS and SA services but that didn't help any. Any suggestions?

  Read the article

• Password History Storage and Variability Comparison

  - by z3ke

  I believe this situation would be similar to many others out there, so maybe some of you can shed some light... Supposedly, when making password changes through MS exchange every 90 days, you cannot use any simple variation of one of your old passwords, up to whatever limit the admin's set for a system. My question: If your previous passwords are only stored as hashes, how can they check for the "just changed one letter" case. Wouldn't they have to have access to the old plain-text passwords in order to make those comparisons? The only other thing I can think of is if upon original creation of a password, they also stored all other one character permutations of it, so that they can be banned later?

  Read the article

• Should I try to write simple key-value storage by myself?

  - by shabunc

  I need a key-value storage in a simplest form we can think of. Keys should be some fixed-length strings, values should be some texts. This key-value storage should have an HTTP-backed API. That's basically it. As you can see, there is no big difference between such storage and some web application with some upload functionality. The thing is - it'll take few hours (including tests and coffee drinking) to write something like this. "Something like this" will be fully under my control and can be tuned on demand. Should I, in this specific case, not try to reinvent bicycles? Is it better to use some of existing NoSQL solutions. If yes, which one exactly? If, say, I'd needed something SQL-like, I won't ask and won't try to write something by myself. But with NoSQL I just don't know what is adequate and what is not.

  Read the article

• Database Memory :: MySql Innodb how much storage memory allocation for empty field vs not empty fie

  - by Yosef

  Hi, I new in database, and dont know how and when mysql allocate memory space. In MySql Innodb how much storage memory allocation for empty field (no string inserted) vs not empty field? Other form of my question: When memory allocated space In MySql Innodb for varchar/text field in time of table creation or when data inserted inside field? Thank you, Yosef

  Read the article

• A storage mechanism has already been configured for this application

  - by Khalil Dahab

  I am getting this error whenever my S#arp Architecture attempts to start and this is an problem with SQL Server (for example: SQL Server is not runing), after I start SQL Server and hit refresh, I get this error: A storage mechanism has already been configured for this application

  Read the article

• How to increase storage for Android Emulator? (INSTALL_FAILED_INSUFFICIENT_STORAGE)

  - by Pentium10

  I get this sometimes(not often) for one of my projects, couple of classes only. Installation error: INSTALL_FAILED_INSUFFICIENT_STORAGE How do I increase emulator's storage?

  Read the article

• Storage requirements of primitive types in Win x64

  - by spender

  For either List with n elements, which (if any) requires more storage on x64 machine: List<int> -or- List<long> I guess the question can be rephrased as: On x64, does an int take any less space than a long?

  Read the article

• java.lang.Error: "Not enough storage is available to process this command" when generating images

  - by jhericks

  I am running a web application on BEA Weblogic 9.2. Until recently, we were using JDK 1.5.0_04, with JAI 1.1.2_01 and Image IO 1.1. In some circumstances (we never figured out exactly why), when we were processing large images (but not that large - a few MB), the JVM would crash without any error message or stack trace or anything. This didn't happen much in production, but enough to be a nuisance and eventually we were able to reproduce it. We decided to switch to JRockit90 1.5.0_04 and we were no longer able to reproduce the problem in our test environment, so we thought we had it licked. Now, however, after the application server has been up for a while, we start getting the error message, "Not enough storage is available to process this command" during image operations. For example: java.lang.Error: Error starting thread: Not enough storage is available to process this command. at java.lang.Thread.start()V(Unknown Source) at sun.awt.image.ImageFetcher$1.run(ImageFetcher.java:279) at sun.awt.image.ImageFetcher.createFetchers(ImageFetcher.java:272) at sun.awt.image.ImageFetcher.add(ImageFetcher.java:55) at sun.awt.image.InputStreamImageSource.startProduction(InputStreamImageSource.java:149) at sun.awt.image.InputStreamImageSource.addConsumer(InputStreamImageSource.java:106) at sun.awt.image.InputStreamImageSource.startProduction(InputStreamImageSource.java:144) at sun.awt.image.ImageRepresentation.startProduction(ImageRepresentation.java:647) at sun.awt.image.ImageRepresentation.prepare(ImageRepresentation.java:684) at sun.awt.SunToolkit.prepareImage(SunToolkit.java:734) at java.awt.Component.prepareImage(Component.java:3073) at java.awt.ImageMediaEntry.startLoad(MediaTracker.java:906) at java.awt.MediaEntry.getStatus(MediaTracker.java:851) at java.awt.ImageMediaEntry.getStatus(MediaTracker.java:902) at java.awt.MediaTracker.statusAll(MediaTracker.java:454) at java.awt.MediaTracker.waitForAll(MediaTracker.java:405) at java.awt.MediaTracker.waitForAll(MediaTracker.java:375) at SfxNET.System.Drawing.ImageLoader.loadImage(Ljava.awt.Image;)Ljava.awt.image.BufferedImage;(Unknown Source) at SfxNET.System.Drawing.ImageLoader.loadImage(Ljava.net.URL;)Ljava.awt.image.BufferedImage;(Unknown Source) at Resources.Tools.Commands.W$zw(Ljava.lang.ClassLoader;)V(Unknown Source) at Resources.Tools.Commands.getContents()[[Ljava.lang.Object;(Unknown Source) at SfxNET.sfxUtils.SfxResourceBundle.handleGetObject(Ljava.lang.String;)Ljava.lang.Object;(Unknown Source) at java.util.ResourceBundle.getObject(ResourceBundle.java:320) at SoftwareFX.internal.ChartFX.wxvw.yxWW(Ljava.lang.String;Z)Ljava.lang.Object;(Unknown Source) at SoftwareFX.internal.ChartFX.wxvw.vxWW(Ljava.lang.String;)Ljava.lang.Object;(Unknown Source) at SoftwareFX.internal.ChartFX.CommandBar.YWww(LSoftwareFX.internal.ChartFX.wxvw;IIII)V(Unknown Source) at SoftwareFX.internal.ChartFX.Internet.Server.xxvw.YzzW(LSoftwareFX.internal.ChartFX.Internet.Server.ChartCore;Z)LSoftwareFX.internal.ChartFX.CommandBar;(Unknown Source) at SoftwareFX.internal.ChartFX.Internet.Server.xxvw.XzzW(LSoftwareFX.internal.ChartFX.Internet.Server.ChartCore;)V(Unknown Source) at SoftwareFX.internal.ChartFX.Internet.Server.ChartCore.OnDeserialization(Ljava.lang.Object;)V(Unknown Source) at SoftwareFX.internal.ChartFX.Internet.Server.ChartCore.Zvvz(LSoftwareFX.internal.ChartFX.Base.wzzy;)V(Unknown Source) Has anyone seen something like this before? Any clue what might be happening?

  Read the article

• Silverlight with Visual Studio 2010 Isolated Storage Error

  - by Greg Finzer

  I am getting an error when trying to access isolated storage when running a Silverlight unit test project in VS2010. Test method Silverlight_Binary_Serialization_Tests.SerializationTests.SerializeBytesTest threw exception: System.IO.IsolatedStorage.IsolatedStorageException: Unable to determine application identity of the caller. Here is the line it is failing on: private readonly IsolatedStorageFile _store = IsolatedStorageFile.GetUserStoreForApplication();

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >