Search Results

Search found 4662 results on 187 pages for 'battery life'.

Page 32/187 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • How to step down voltage from 208V to 110V

    - by Eric Dennis
    I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

    Read the article

  • What does this beep code mean?

    - by Jaspack
    When I wanted to start my laptop today (an Acer Aspire 8920G), the laptop started beeping. I know this beeping is a POST error code, but I can not figure out which one it is. The motherboard of the laptop is manufactured by Phoenix, so I looked up these POST codes: http://www.bioscentral.com/beepcodes/phoenixbeep.htm The beeping is in the form 1-1-1-1 (short beeps, repeating and even without ending), but this code is not mentioned by the manufacturer. Does anybody know what could be the problem? I don't know if it is relevant, but since a couple of months the CMOS battery was degrading. The laptop couldn't keep track of the time. Maybe a failing CMOS battery could be the problem?

    Read the article

  • Melting Laptop Power Supply Tip

    - by AlReece45
    Several (6-7) months ago, my laptop power supply cord got a cut in it and stopped working. Having gotten cheap (and short) power supplies in the past, I decided to buy 2 brand new ones from the manufacturer (ASUS). Now, I used my laptop a little less than usual between February and March. During that time I noticed a few times that the power supply, even though plugged in, did not provide power. Often the computer would just off on me. I figured it was just that one power supply being bad. I had left the alternate at my parent's house in another state and asked them to ship it to me. Now, at work the other day I wanted to get a file off the of hard disk. So I booted it up, knowing that it had a low battery, plugged it in. During the first 2 minutes of use, I was told that the battery was low and I should plug it in. I unplugged it, inspected the end (Being plugged in, this was suspicious), and decided I shouldn't plug it back in-- the plastic on the tip was melting from the heat of the metal on the tip. The computer had simply booted up and I had the file-manager open. It had not been on for more than 10 hours. Now I know that computers tend to get pretty hot. However, the melting point of plastic is usually above 200C.. so that's much hotter than the computer should be generating. I went and bought a THIRD power supply. This time a universal one from Best Buy (it was very fast to buy and test). I tried it out on the computer and it's tip is melting as well. My older laptop that uses the universal power supply uses it perfectly (has been about a week and a part of use now). I have tried using the computer without the battery, with the same effect. Obviously, this is not a problem with the power supply. My room mate and I being trained computer techs were contemplating taking the computer apart and desoldering and resoldering on the power tip. (The computer is about 6 months out of its 2-year warranty). We're hoping that will correct the issue as I would prefer to devote my money on a Good Desktop rather than yet ANOTHER $1200+ laptop. Is there any thing I'm missing here that might cause the the tip on the power unit to melt?

    Read the article

  • how did my laptop lose daylight savings time on power loss?

    - by EndangeringSpecies
    it was an old laptop that may or may not have dead CMOS battery (at least it had time reset to 0 when I dusted it off). So, it was plugged into power for awhile without the main battery and the clock was correct. Then there was a power outage. When I subsequently turned it on, surprise-surprise, it had one hour off correct time. So the clock apparently kept running during the outage, but daylight savings time info vanished (from disk? where is it stored?) How come?

    Read the article

  • Issue with broken disk on Solaris with raidctl - how to proceed

    - by weismat
    I have a SunFire T2000 server which has 2 mirrored disks pairs. The server required an exchange of the system battery. After swaping the battery first no disks were found. After booting from CD we managed to find the disks, but now one disk is broken and the raidctl reports a failed synchronisation. The boot process stops now when trying to mount the file systems. The power light of the broken drive is not even blinking. What is the best way to proceed now ? Fortunately I could live with loosing the data on the drive as it is backed up, but I would like to keep the rest of the data as it contains /etc and get the server booting again.

    Read the article

  • Backlight dimming don't work

    - by Mathias
    My Packard Bell EasyNote TS11HR notebook does not have an option for dimming the display backlight. At night, my eyes begin to hurt because of the strong light from the screen. My laptop is 2-3 months old and I am sure it has worked before. When I click on the battery icon in the notification area, it says in my language (Danish): "the setting for light does possibly reduce the life of the battery". However, I cannot dim the backlight. I have tried downloading programs for dimming the screen but they only make the screen darker, instead of dimming the backlight. I have tried updating my drivers and looking in the BIOS for a setting. I also plan to use an Ubuntu LiveCD to try controlling it. As of now though, the backlight is locked at maximum. Any ideas?

    Read the article

  • Steps to install solely ubuntu 13.04 on Dell inspiron 14z ultrabook with SSD+HDD

    - by rishy
    I have tried a few things like disabling the Intel smart response, choosing AHCI in BIOS. But there are certain problems I am still facing. I can't see my SSD during the installation of ubuntu (I am planning to install Ubuntu on my SSD and other files on HDD). When I run Ubuntu my laptop gets overheated and battery backup reduces to 90 minutes. (I guess it's related to my graphic driver ATI Raedon HD 7570). Cooling fan seems to run at its fullest, it was working much better in windows. So, overall I wanted to know what are the exact steps I need to follow to install Ubuntu on my SSD and then use my HDD to keep other files, How can I get rid of overheating and battery backup problem?

    Read the article

  • DELL Vostro 1520 bios crashed during update. now not giving even startup display

    - by Baahu
    my dell vostro 1520 crashed while i was installing drivers of windows 7 64bit. when i tried to update the bios it suddenly hanged. it remained in that state for a long time and was not getting off even by pressing and holding the power button. i removed the battery and after again installing the battery laptop is not giving any display of startup and all the caps lock lights are blinking. what the problem is this. i am worry about my laptop. please tell me the solution

    Read the article

  • How to step down voltage from 208V to 110V

    - by Eric Dennis
    I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

    Read the article

  • Dell Precision 670 no booting

    - by fristson
    Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

    Read the article

  • Using wrong adaptor with same V but wrong amps with my laptop

    - by Merve
    I have a Toshiba Satellite A200 1-GH. My sister's old laptop was also a Toshiba. The adaptors were mixed somehow, and I've been using the wrong adaptor for a very long time. I've realized this when my computer could not work without the adaptor plugged in. When I checked out the voltage-amps values, the values on my computer were 19V-4.7A, the values on the adaptor were 19V-3.42A. I bought a new adaptor corresponding to the values written under the computer immediately but I was wondering if the battery should also be replaced? If so, what happened to the battery technically that made it useless anymore? Can anybody help?

    Read the article

  • After installing Windows 8, boot hangs before BIOS setup

    - by Joe Purvis
    I have an Alienware M15x, 940MX processor, 16 GB RAM, 512GB M4 SSD, and I was running Win7 64bit. I backed up the disk and ran Win 8 setup. Setup appeared to go well through multiple reboots. After the last reboot, it simply stopped after POST at "Press F2 for bios setup". I have tried powering off, reducing RAM to one stick, removing MOS battery. Now, it gets to the screen with "Press F2 for setup" and "Press F12 for boot options". If I press F2, I get a single beep only. If I press F12, nothing. I cannot get into the BIOS to change boot options to boot from another disk and restore. I do have the latest BIOS. I am going to try replacing the CMOS battery, but I don't think that is likely to help. The computer has been fast and very reliable until now.

    Read the article

  • Why does my PowerBook display “Fixing recursive fault but reboot is needed!” and stop booting?

    - by Blacklight Shining
    I have an old PowerBook G4 that worked (more or less) fine with a previous installation of Ubuntu Desktop 12.04. A few days ago I decided to install Ubuntu Server instead, and got a copy of Ubuntu Server 12.10. The installation seemed to complete successfully, but now, whenever I try to boot the system, it simply halts at some point after I unlock the hard disk. There is a lot of text on the screen (which is normal for me during a boot, except now it's mostly errors and debug information), the last of which is this: [ 26.338228] Fixing recursive fault but reboot is needed! Pressing control command power to force a reboot yields exactly the same results. A search for the error message turned up many temporary solutions involving kernel parameters, but none of them have worked for me. I don't think I can remove the default set of parameters (which I think is quiet splash), but I can pass additional parameters on boot. I've tried booting on AC and battery power, as well as using these combinations of kernel parameters while on battery power: acpi=enable pci=noacpi pci=assign-busse acpi=ht acpi=off nomodeset nomodeset acpi=off Why am I getting this error and how can I fix it?

    Read the article

  • 8 Reasons Why Even Microsoft Agrees the Windows Desktop is a Nightmare

    - by Chris Hoffman
    Let’s be honest: The Windows desktop is a mess. Sure, it’s extremely powerful and has a huge software library, but it’s not a good experience for average people. It’s not even a good experience for geeks, although we tolerate it. Even Microsoft agrees about this. Microsoft’s Surface tablets with Windows RT don’t support any third-party desktop apps. They consider this a feature — users can’t install malware and other desktop junk, so the system will always be speedy and secure. Malware is Still Common Malware may not affect geeks, but it certainly continues to affect average people. Securing Windows, keeping it secure, and avoiding unsafe programs is a complex process. There are over 50 different file extensions that can contain harmful code to keep track of. It’s easy to have theoretical discussions about how malware could infect Mac computers, Android devices, and other systems. But Mac malware is extremely rare, and has  generally been caused by problem with the terrible Java plug-in. Macs are configured to only run executables from identified developers by default, whereas Windows will run everything. Android malware is talked about a lot, but Android malware is rare in the real world and is generally confined to users who disable security protections and install pirated apps. Google has also taken action, rolling out built-in antivirus-like app checking to all Android devices, even old ones running Android 2.3, via Play Services. Whatever the reason, Windows malware is still common while malware for other systems isn’t. We all know it — anyone who does tech support for average users has dealt with infected Windows computers. Even users who can avoid malware are stuck dealing with complex and nagging antivirus programs, especially since it’s now so difficult to trust Microsoft’s antivirus products. Manufacturer-Installed Bloatware is Terrible Sit down with a new Mac, Chromebook, iPad, Android tablet, Linux laptop, or even a Surface running Windows RT and you can enjoy using your new device. The system is a clean slate for you to start exploring and installing your new software. Sit down with a new Windows PC and the system is a mess. Rather than be delighted, you’re stuck reinstalling Windows and then installing the necessary drivers or you’re forced to start uninstalling useless bloatware programs one-by-one, trying to figure out which ones are actually useful. After uninstalling the useless programs, you may end up with a system tray full of icons for ten different hardware utilities anyway. The first experience of using a new Windows PC is frustration, not delight. Yes, bloatware is still a problem on Windows 8 PCs. Manufacturers can customize the Refresh image, preventing bloatware rom easily being removed. Finding a Desktop Program is Dangerous Want to install a Windows desktop program? Well, you’ll have to head to your web browser and start searching. It’s up to you, the user, to know which programs are safe and which are dangerous. Even if you find a website for a reputable program, the advertisements on that page will often try to trick you into downloading fake installers full of adware. While it’s great to have the ability to leave the app store and get software that the platform’s owner hasn’t approved — as on Android — this is no excuse for not providing a good, secure software installation experience for typical users installing typical programs. Even Reputable Desktop Programs Try to Install Junk Even if you do find an entirely reputable program, you’ll have to keep your eyes open while installing it. It will likely try to install adware, add browse toolbars, change your default search engine, or change your web browser’s home page. Even Microsoft’s own programs do this — when you install Skype for Windows desktop, it will attempt to modify your browser settings t ouse Bing, even if you’re specially chosen another search engine and home page. With Microsoft setting such an example, it’s no surprise so many other software developers have followed suit. Geeks know how to avoid this stuff, but there’s a reason program installers continue to do this. It works and tricks many users, who end up with junk installed and settings changed. The Update Process is Confusing On iOS, Android, and Windows RT, software updates come from a single place — the app store. On Linux, software updates come from the package manager. On Mac OS X, typical users’ software updates likely come from the Mac App Store. On the Windows desktop, software updates come from… well, every program has to create its own update mechanism. Users have to keep track of all these updaters and make sure their software is up-to-date. Most programs now have their act together and automatically update by default, but users who have old versions of Flash and Adobe Reader installed are vulnerable until they realize their software isn’t automatically updating. Even if every program updates properly, the sheer mess of updaters is clunky, slow, and confusing in comparison to a centralized update process. Browser Plugins Open Security Holes It’s no surprise that other modern platforms like iOS, Android, Chrome OS, Windows RT, and Windows Phone don’t allow traditional browser plugins, or only allow Flash and build it into the system. Browser plugins provide a wealth of different ways for malicious web pages to exploit the browser and open the system to attack. Browser plugins are one of the most popular attack vectors because of how many users have out-of-date plugins and how many plugins, especially Java, seem to be designed without taking security seriously. Oracle’s Java plugin even tries to install the terrible Ask toolbar when installing security updates. That’s right — the security update process is also used to cram additional adware into users’ machines so unscrupulous companies like Oracle can make a quick buck. It’s no wonder that most Windows PCs have an out-of-date, vulnerable version of Java installed. Battery Life is Terrible Windows PCs have bad battery life compared to Macs, IOS devices, and Android tablets, all of which Windows now competes with. Even Microsoft’s own Surface Pro 2 has bad battery life. Apple’s 11-inch MacBook Air, which has very similar hardware to the Surface Pro 2, offers double its battery life when web browsing. Microsoft has been fond of blaming third-party hardware manufacturers for their poorly optimized drivers in the past, but there’s no longer any room to hide. The problem is clearly Windows. Why is this? No one really knows for sure. Perhaps Microsoft has kept on piling Windows component on top of Windows component and many older Windows components were never properly optimized. Windows Users Become Stuck on Old Windows Versions Apple’s new OS X 10.9 Mavericks upgrade is completely free to all Mac users and supports Macs going back to 2007. Apple has also announced their intention that all new releases of Mac OS X will be free. In 2007, Microsoft had just shipped Windows Vista. Macs from the Windows Vista era are being upgraded to the latest version of the Mac operating system for free, while Windows PCs from the same era are probably still using Windows Vista. There’s no easy upgrade path for these people. They’re stuck using Windows Vista and maybe even the outdated Internet Explorer 9 if they haven’t installed a third-party web browser. Microsoft’s upgrade path is for these people to pay $120 for a full copy of Windows 8.1 and go through a complicated process that’s actaully a clean install. Even users of Windows 8 devices will probably have to pay money to upgrade to Windows 9, while updates for other operating systems are completely free. If you’re a PC geek, a PC gamer, or someone who just requires specialized software that only runs on Windows, you probably use the Windows desktop and don’t want to switch. That’s fine, but it doesn’t mean the Windows desktop is actually a good experience. Much of the burden falls on average users, who have to struggle with malware, bloatware, adware bundled in installers, complex software installation processes, and out-of-date software. In return, all they get is the ability to use a web browser and some basic Office apps that they could use on almost any other platform without all the hassle. Microsoft would agree with this, touting Windows RT and their new “Windows 8-style” app platform as the solution. Why else would Microsoft, a “devices and services” company, position the Surface — a device without traditional Windows desktop programs — as their mass-market device recommended for average people? This isn’t necessarily an endorsement of Windows RT. If you’re tech support for your family members and it comes time for them to upgrade, you may want to get them off the Windows desktop and tell them to get a Mac or something else that’s simple. Better yet, if they get a Mac, you can tell them to visit the Apple Store for help instead of calling you. That’s another thing Windows PCs don’t offer — good manufacturer support. Image Credit: Blanca Stella Mejia on Flickr, Collin Andserson on Flickr, Luca Conti on Flickr     

    Read the article

  • How to diagnose and fix Kernel Panic Fatal Machine Check error?

    - by 0x4a6f4672
    I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

    Read the article

  • Packard Bell EasyNote MZ35 freezes when AC unplugged and wireless on

    - by Sense Hofstede
    I would like to ask for some help debugging an irritating problem I'm having with my Packard Bell EasyNote MZ35 and Ubuntu 10.10. Always when the laptop is connected to a wireless network and the AC power lead is unplugged—so it's running on battery power—the system freezes. The screen turns black and shows the error GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0), although this error is completely unrelated to the actual problem. Previous searches on the internet indicate that this error is unrelated to the bug I'm experiencing. It is suggested that Ubuntu tries to hibernate or suspend and that you're seeing the black screen running 'behind' the X server. That would explain the fact that curiously you still see—but cannot move—the mouse cursor. I've already set all the values of the GConf keys in /apps/gnome-power-manager/actions/ to 'nothing', disabled all power management actions I could find, but it didn't solve the problem. It is important to note that the freeze doesn't happen immediately after you unplug the AC power lead. The icon in the notification area may have changed already, but the freeze only occurs when the Notify OSD bubble appears that tells you how many time is left with your battery. Does anyone here have a clue about this problem? A workaround or the cause? If anyone could help me with disabling possible suspend/hibernate behaviour that might be related to this issue, that would be appreciated too. This issue has been reported as bug #666852.

    Read the article

  • How to restore curropted installation?

    - by nightweels
    I have a laptop with dead battery that when there is no current connected to it turns critical so fast and in the energy management in ubuntu, when the battery is critical, there are 2 options: shutdown and hibernate witch is in grey (unclickable), so I have no choice but to chose immediate shutdown, there is no standby even if it is an option in the screen behavior. An immediate shutdown (and I mean by immediate the one that we use when we ended using the computer) happened while I was installing a program called quickly, so after the power was restored, I tried to reinstall the program then I get this translated message: An untreatable error occurred: It seems there is a software error in aptdaemon, the program that lets you install and remove software and any other task related to package management. details: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 968, in simulate trans.unauthenticated = self._simulate_helper(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1092, in _simulate_helper return depends, self._cache.required_download, \ File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 235, in required_download pm.get_archives(fetcher, self._list, self._records) SystemError: E:I wasn't able to locate a file for the libpng12-dev package. This might mean you need to manually fix this package.

    Read the article

  • Alienware M17x R3: Possible downclock

    - by Ywen
    I installed recently Kubuntu 11.10 32 bits (had graphics driver issues, wanted to try on 32 bits version) on my new Alienware M17x, with a Core i7-2670QM CPU. Cores are supposed to be clocked at 2.2 GHz, however the output of $ cat /proc/cpuinfo | grep -i "hz" gives me: model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 model name : Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz cpu MHz : 800.000 If useful, the AC adapter is plugged in (yet the ouput is the same when the computer is powered only by the battery) and I have Firefox and Eclipse running. Does /proc/cpuinfo reflect a possible automatic downclock made to save power if processor load is low or is this output abnormal? EDIT: Ok, I checked and yes, the ouput does vary in function of the load. I reach 2.2 GHz when needed. But my following problem remains. I was checking my CPU clocking because I experienced poor performances when reading 720p video files on Ubuntu with VLC or mplayer when on battery (and I believe VLC by default only uses CPU, not GPU to decode), whereas I haven't got such problems with VLC on Windows (which made me think it wasn't coming from a BIOS option, plus every option in the BIOS regarding the CPU is turned ON).

    Read the article

  • Ubuntu boot problem/unity failure

    - by Kenny
    So here I am sitting in a big pile of muck...over the last 2 days things have just been going from bad to worse with version of Ubuntu 12.10. So 2 days ago I was fiddling around with kismet and airmon-ng. I had added a bunch of libraries, I remember adding GTK+, Glib, Pango, etc. After restarting the other day my desktop opened fine but my background was changed to the default and none of my files on the desktop were visible and the top bar and side bar were not visible or functioning. The window managers were still working. I then tried reinstalling my nvidia drivers to see if that would change anything, it did not. Then after doing some searching online I found something that suggested I try deleting the file "libgtk-3.so.0". I deleted this and tried to restart the computer. Upon restart, I was greeted by a black screen with some writing saying something about -starting clamAV [OK] -problem with Apache Server could not verify correct...something... - checking battery state [ok]. After it gets to battery state it just stops and sits there indefinitely. So to sum, I cannot login to ubuntu because it just sits at this black screeen. If anyone has any idea as to what is going on and how to fix it please let me know. Thanks!

    Read the article

  • Cannot get temperatures in Dell Studio 1558

    - by Athul Iddya
    I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

    Read the article

  • Hybrid Graphics Functional won't work with my Asus UL30V anymore

    - by futuress
    The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

    Read the article

  • 12.10 upgrade broke brightness keys [closed]

    - by Chris Morgan
    I have been running Ubuntu (64-bit) on my HP 6710b laptop (Core 2 Duo with integrated graphics) for several years, and the backlight brightness keys have always worked. Since I upgraded to Ubuntu 12.10 earlier today, those keys do not work any more. The secondary function keys: Fn+F3: sleep; still works (and considerably faster than ever before!) Fn+F8: battery info; still works Fn+F9: reduce brightness; stopped working in 12.10 Fn+F10: increase brightness; stopped working in 12.10 It may also be worth while mentioning that X does not appear to be receiving the brightness events at all, or at least not sending them out further. (This I detected with a key logger I wrote for a Uni project, which uses X's Record extension; it is informed of the sleep and battery info keystrokes, but doesn't receive the brightness ones at all.) In the mean time, I know that I can use the Brightness & Lock settings screen to alter the brightness. (Wow! I can suddenly make my backlight darker than I could before—I can go right down to turning the backlight off, something I couldn't do before... but this model has a fairly dim screen, so I don't expect to use that much, if ever.) How can I get the brightness keys working again? This question is probably strongly related to I can't control my Brightness in HP Compaq 6710s.

    Read the article

  • My Obligatory IPad Post

    - by mark.wilcox
    I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

    Read the article

  • How do I turn off PCI devices?

    - by ethana2
    With the purchase of an Intel SSD and 85WHr Li-ion battery and the linking of wifi and bluetooth to my laptop's wireless switch, extensive Intel PowerTop usage, switching from compiz to metacity, stopping of the desktop-couch daemon, removal of Ubuntu One and several other services from my startup, disabling of everything possible in my BIOS, and physical removal of my optical drive, I've gotten my battery life up fairly high, but I think there's still more to be done. Specifically, when I'm in class taking notes, I want to temporarily but completely power down: Ethernet Firewire USB ports SD card reader Optical drive Webcam Sound card PCMCIA slot ..without turning them off in my BIOS like they are now, if possible, because then I have to restart my computer to use any of them. As it stands, I still haven't managed to power down: Firewire USB connection to webcam sound card How do I tell Linux to disable and power down these devices? Is it true that any PCI slot can be physically powered down? My current idle power consumption is 7.9 watts plus the screen. (10.0W at min. brightness) Also, how do I set the screen timeout to ten seconds? gconf editor isn't honoring it when I set it to that. Will switching from nVidia to Nouveau save any significant amount of power?

    Read the article

  • How do I upgrade from ubuntu 9.10 to 12.10 on my Acer Aspire 3000

    - by 770
    I had my Acer Aspire 3000 as a dual boot XP/ubuntu 9.10 a couple years ago. I recently blew the dust of it and wanted to upgrade to 7/Ubuntu 12.10 so I began by formatting the Ubuntu side of the partition and apparently damaged the mbr as I could only get black screen with the error message: GRUB loading. error: no such partition grub rescue I then slaved the hdd to my win7 desktop and formatted the entire drive, both sides of the partition then reinstalled it in the Acer and tried to install win7. Upon starting the Acer I got the same error message: GRUB loading. error: no such partition grub rescue I then tried to reinstall Ubuntu 9.10 as I have an Ubuntu produced installation cd. Same result. Next day I received a new battery I had ordered for the Acer. I plugged it and the power supply in and hit the power button just to see if I at least could charge the battery but to my surprise Ubuntu 9.10 began to install, so I let it and it did. Now the hard drive shows 58 gb and 2.5gb partitions neither of which is formatted NTFS for/by windows. I am guessing that the GRUB/mbr was repaired somehow by the Ubuntu reinstallation. My question, should you choose to accept it; How can I get to my goal of dual boot win7/Ubuntu 12.10. I am a beginner and don't know much about linux or the terminology. Thank you for your thoughts and help.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >