Search Results

Search found 1148 results on 46 pages for 'capacity'.

Page 32/46 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• RealTek RTL8188CE WiFi adapter doesn't connect reliably

  - by ken.ganong

  I recently bought a new system76 laptop which came pre-installed with Ubuntu 11.10. I've been having trouble with my wireless connectivity. It seems that my connection with my wireless network keeps going in and out. It is not my network--I have seen the same problem on multiple WiFi networks and at different distances and reported link qualities. OS version: Ubuntu 11.10 oneiric kernel version: 3.0.0-14-generic lspci: lspci -nnk | grep -iA2 net 04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) Subsystem: Realtek Semiconductor Co., Ltd. Device [10ec:9196] Kernel driver in use: rtl8192ce -- 05:00.0 Ethernet controller [0200]: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250] (rev 05) Subsystem: CLEVO/KAPOK Computer Device [1558:2500] Kernel driver in use: jme iwconfig: iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"peppermintpatty" Mode:Managed Frequency:2.462 GHz Access Point: 98:FC:11:6C:E0:22 Bit Rate=72.2 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Power Management:off Link Quality=49/70 Signal level=-61 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:1103 Missed beacon:0 lshw: sudo lshw -class network *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 00:1c:7b:a1:95:04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.0.0-14-generic firmware=N/A ip=192.168.1.106 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:18 ioport:e000(size=256) memory:f7d00000-f7d03fff *-network description: Ethernet interface product: JMC250 PCI Express Gigabit Ethernet Controller vendor: JMicron Technology Corp. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 00:90:f5:c0:42:b3 size: 10Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm pciexpress msix msi bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=jme driverversion=1.0.8 duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:56 memory:f7c20000-f7c23fff ioport:d100(size=128) ioport:d000(size=256) memory:f7c10000-f7c1ffff memory:f7c00000-f7c0ffff Any help would be appreciated. The last time I've dealt with wireless issues, the most given solution was NDIS wrapper and I seem sorely out-of-date.

  Read the article

• Oracle Leader in Transportation Management

  - by John Murphy

  Oracle Named a Leader in the Transportation Management Systems Market by Leading Analyst Firm Redwood Shores, Calif. – October 15, 2012 News Facts Gartner, Inc. has placed Oracle Transportation Management in the Leaders Quadrant of its 2012 report, “Magic Quadrant for Transportation Management Systems (TMS).” (1) Gartner Magic Quadrants position vendors within a particular market segment based on their completeness of vision and ability to execute on that vision. According to the report, “Multiple subcomponents make up a comprehensive TMS across planning (for example, load consolidation, routing, mode selection and carrier selection) and execution (for example, tendering loads to carriers, shipment track and trace, and freight audit and payment).” Built on modern, flexible, Internet based architecture, Oracle Transportation Management is a global transportation and logistics operations system that allows companies to minimize cost, optimize service levels, support sustainability initiatives, and create flexible business process automation within their transportation and logistics networks. With a share of 26% of worldwide software revenue for 2011, Oracle is also number one in TMS vendor share according to Gartner’s report, “Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016.” (2) Supporting Quote “Shippers and logistics service providers face increasingly complex challenges as they try to reduce costs, secure capacity and improve overall freight efficiency,” said Derek Gittoes, vice president, logistics product strategy, Oracle. “We believe our high standing in both Gartner reports is a reflection of Oracle’s commitment to addressing these challenges by delivering the industry’s broadest and deepest transportation management platform. With a flexible and modern platform, we are able to support customers with both basic transportation needs, as well as those with highly complex logistics requirements.” Supporting Resources Magic Quadrant for Transportation Management Systems Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016 Oracle Transportation Management (1) Gartner, Inc., “Magic Quadrant for Transportation Management Systems,” by C. Dwight Klappich, August 23, 2012 (2) Gartner, Inc., “Market Trends: A Golden Opportunity in the Transportation Management System Market, 2012 – 2016,” by Chad Eschinger and C. Dwight Klappich, September 24, 2012. About Oracle Applications Over 65,000 customers worldwide rely on Oracle's complete, open and integrated enterprise applications to achieve superior results. Oracle provides a secure path for customers to benefit from the latest technology advances that improve the customer software experience and drive better business performance. Oracle Applications Unlimited is Oracle's commitment to customer choice through continuous investment and innovation in current applications offerings. Oracle's next-generation Fusion Applications build upon that commitment, and are designed to work with and evolve Oracle's Applications Unlimited offerings. Oracle's lifetime support policy helps ensure customers will continue to have a choice in upgrade paths, based on their enterprise needs. For more information on the latest Oracle Applications releases go towww.oracle.com/applications About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. For more information about Oracle (NASDAQ:ORCL), visit www.oracle.com. Trademarks Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. ###   Karen [email protected] Simon JonesBlanc & [email protected]

  Read the article

• Announcing the New Virtual Briefing Center

  - by Theresa Hickman

  Do you want to hear about real-world customer success stories? Or listen to Oracle Application leaders discuss the value in the latest releases of Oracle Application products? Do you want one place to download up-to-date content, including white papers, podcasts, webcasts and presentations? Did you miss the Virtual Trade Show at the beginning of 2011? If you answered yes to any of these questions, then the Virtual Briefing Center is the place to get up-to-date Oracle product information for Oracle E-Business Suite, PeopleSoft, JD Edwards, Fusion, Siebel and Hyperion across multiple product areas from financials, procurement, supply chain, CRM, Performance Management, and more. Every month we will have "Monthly Spotlights" to showcase new content. The following lists the upcoming live webcasts in July 2011: Weds. July 6, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear about Amway’s upgrade to Oracle E-Business Suite 12.1 and how they stabilized financial modules, especially the month-end close processes. Thurs. July 14, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Hear West Corporation share their PeopleSoft 9.1 upgrade, resulting in improved self-service, more robust reporting capabilities and new workflow and processes. Thurs. July 21, 2011 at 9:00 a.m. PST/12:00 p.m. EST: Learn how MFlex improved their operations, saved manpower and reduced time to close with their upgrade to JD Edwards EnterpriseOne 9.0. Thurs. July 28, 2011 at 9:00 a.m. PST/12:00 p.m. EST: IEEE discusses their upgrade to Siebel 8.1 using open web service architecture for faster SOA enablement allowing them to scale their membership capacity by 250%. If you cannot attend any of the above live events, that's OK because each of the webcasts in this series will be recorded and available on demand. And for you Financials folks who may have missed the webcasts from the Virtual Trade Show earlier this year, you can view them on demand by Visiting the Resource Library: Planning Your Successful Upgrade to Oracle E-Business Suite Financials 12.1. In this session, Bryant and Stratton College talk about their upgrade. Planning Your Successful Upgrade to PeopleSoft Financials 9.1. In this session, the University of Central Florida share their upgrade story. Fusion Financials: The New Standard for Finance. In this session, Terrance Wampler, the VP of Financial Application Strategy discusses the business value of Oracle's next generation financial applications and how customers can take advantage of Fusion Financials alongside their existing investments. What are you waiting for? Register now!

  Read the article

• Using Oracle BPM to Extend Oracle Applications

  - by Michelle Kimihira

  Author: Srikant Subramaniam, Senior Principal Product Manager, Oracle Fusion Middleware Customers often modify applications to meet their specific business needs - varying regulatory requirements, unique business processes, product mix transition, etc. Traditional implementation practices for such modifications are typically invasive in nature and introduce risk into projects, affect time-to-market and ease of use, and ultimately increase the costs of running and maintaining the applications. Another downside of these traditional implementation practices is that they literally cast the application in stone, making it difficult for end-users to tailor their individual work environments to meet specific needs, without getting IT involved. For many businesses, however, IT lacks the capacity to support such rapid business changes. As a result, adopting innovative solutions to change the economics of customization becomes an imperative rather than a choice. Let's look at a banking process in Siebel Financial Services and Oracle Policy Automation (OPA) using Oracle Business Process Management. This approach makes modifications simple, quick to implement and easy to maintain/upgrade. The process model is based on the Loan Origination Process Accelerator, i.e., a set of ready to deploy business solutions developed by Oracle using Business Process Management (BPM) 11g, containing customizable and extensible pre-built processes to fit specific customer requirements. This use case is a branch-based loan origination process. Origination includes a number of steps ranging from accepting a loan application, applicant identity and background verification (Know Your Customer), credit assessment, risk evaluation and the eventual disbursal of funds (or rejection of the application). We use BPM to model all of these individual tasks and integrate (via web services) with: Siebel Financial Services and (simulated) backend applications: FLEXCUBE for loan management, Background Verification and Credit Rating. The process flow starts in Siebel when a customer applies for loan, switches to OPA for eligibility verification and product recommendations, before handing it off to BPM for approvals. OPA Connector for Siebel simplifies integration with Siebel’s web services framework by saving directly into Siebel the results from the self-service interview. This combination of user input and product recommendation invokes the BPM process for loan origination. At the end of the approval process, we update Siebel and the financial app to complete the loop. We use BPM Process Spaces to display role-specific data via dashboards, including the ability to track the status of a given process (flow trace). Loan Underwriters have visibility into the product mix (loan categories), status of loan applications (count of approved/rejected/pending), volume and values of loans approved per processing center, processing times, requested vs. approved amount and other relevant business metrics. Summary Oracle recommends the use of Fusion Middleware as an extensions platform for applications. This approach makes modifications simple, quick to implement and easy to maintain/upgrade applications (by moving customizations away from applications to the process layer). It is also easier to manage processes that span multiple applications by using Oracle BPM. Additional Information Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• Can I safely delete the Ubuntu 12.04 partition and use the unallocated space for my Elementary OS?

  - by d4ryl3

  I have this setup: I've decided to switch to Elementary OS Luna (fork of Ubuntu 12.04) as my main Linux distro. Now I need to delete my Ubuntu partition so I could add capacity to my eOS which only has 10Gb. Currently my eOS is in /dev/sda9, and Ubuntu in /dev/sda8/. I forgot where my bootloader is installed, so I ran bootinfoscript, which returned this: `============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 94 for . sda1: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /Boot/BCD sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /bootmgr /boot/bcd sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: sda7: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7 and looks at sector 851823520 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Boot files: /grub/grub.cfg /extlinux/extlinux.conf sda8: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda8 and looks at sector 860224256 of the same hard drive for core.img. core.img is at this location and looks for (,msdos9)/boot/grub on this drive. Operating System: Ubuntu 13.04 Boot files: /etc/fstab sda9: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: elementary OS Luna Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img` I need advice as to how to proceed. I mean, could I simply delete /dev/sda7/ and /dev/sda8/? Please help, thank you.

  Read the article

• links for 2011-02-08

  - by Bob Rhubart

  When It Comes to Data Integration, Oracle Is the Right Choice (tags: ping.fm) When It Comes to Data Integration, Oracle Is the Right Choice (tags: ping.fm) Webcast: Webcast: Deploy Oracle VM Templates for Oracle E-Business Suite and Oracle PeopleSoft Enterprise Applications. Feb 15. Event Date: 02/15/2011 9:00am PT / Noon ET. Featured Speakers: Adam Hawley (Oracle Senior Director, Product Management, Virtualization), Ivo Dujmovic (Oracle Director, Technology Integration), Greg Kelly (Oracle Product Strategy Manager - PeopleTools). (tags: oracle virtualization peoplesoft) Webcast: Managing Oracle Exadata with Oracle Enterprise Manager 11g Thursday, February 10, 2011 - 10 a.m. PT/1 p.m. ET. Ask Oracle experts questions and learn firsthand how to efficiently manage all stages of Oracle Exadata’s lifecycle, from testing to deployment. (tags: oracle exalogic enterprisemanager) Arthur Cole: Winning the Consolidated Data Center Future | ITBusinessEdge.com "According to InformationWeek, the amount of data under management is increasing by about 20 percent per year, with some organizations having to deal with 50 percent or more. That means capacity needs to double every two or three years." - Arthur Cole (tags: dataconsolidation enterprisearchitecture) Transformation of Product Management in Telecommunications for Rapid Launch of Next Generation Products (Telecommunications Architecture Corner) Raul Goycoolea's post examines "how enterprise product management enabled by PLM-based product catalogue solutions helps to launch next generation products rapidly in the context of the Telecommunication Industry." (tags: oracle otn enterprisearchitecture) Richard Veryard on Architecture: What is an EA vendor? "Even some people who insist that enterprise architecture shouldn't be thought of as merely software architecture seem to think that 'tools' only means 'software tools.'" - Richard Veryard (tags: enterprisearchitecture) MDM for Tax Authorities (Oracle Master Data Management) "Tax Authorities face a multitude of IT challenges," says David Butler. "Compounding these issues is the fact that the IT architectures in operation at most revenue and collections agencies are very complex." (tags: oracle otn MDM ITarchitecture) Bernard Golden: How Cloud Computing Changes IT Staffs | CIO.com | CIO.com "Enterprise architects become more important" tops Bernard's list of changes. (tags: cloudcomputing staffing cio enterprisearchitecture) Martijn Linssen: Social Enterprise Magic Quadrant "Revolutions usually go wrong, where evolutions usually go right." - Martijn Linssen (tags: socialcomputing enterprise2.0) Why Do IT Roles Fail? | CIO "The roles that come up most often are the ones that are not directly building or maintaining systems. These include architecture, planning, vendor management, relationship management, PMO, and security." - Marc Cecere (tags: softwarearchitecture technologyroles) We're Hiring! - Server and Desktop Virtualization Product Management (Oracle's Virtualization Blog) Adam Hawley with information on an opportunity for qualified job seekers. (tags: oracle otn employment virtualization)

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• Wifi disabled for Intel Centrino Wireless-N 1000 Intel in 12.04

  - by new_bie

  Laptop model - HP- dm4 - 2070. I had faced the same problem for wireless being disabled in case of 11.10. It had to do with the new kernel. I thought with 12.04 this problem will be handled but the problem persists. Is there no way to get the wireless working except for the way mentioned in the following link ?? Wifi for Centrino Wireless-N 1000 Intel Corporation (HP pavillion dm4 - 2070us) is not working Output for sudo lshw -class network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:c2500000-c2501fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: c0 serial: 2c:41:38:07:f3:e3 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.116 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:c1400000-c143ffff ioport:2000(size=128) Output for dmesg | grep iwl [ 14.742886] iwlwifi 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.742897] iwlwifi 0000:01:00.0: setting latency timer to 64 [ 14.743013] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000 [ 14.743016] iwlwifi 0000:01:00.0: pci_resource_base = ffffc90000c78000 [ 14.743018] iwlwifi 0000:01:00.0: HW Revision ID = 0x0 [ 14.743119] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X [ 14.743161] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 14.743229] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.765147] iwlwifi 0000:01:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 14.765151] iwlwifi 0000:01:00.0: Device SKU: 0X50 [ 14.765154] iwlwifi 0000:01:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 14.765907] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 14.912840] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-5.ucode' failed. [ 14.914254] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-4.ucode' failed. [ 14.915718] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-3.ucode' failed. [ 14.916986] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-2.ucode' failed. [ 14.919391] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-1.ucode' failed. [ 14.919445] iwlwifi 0000:01:00.0: no suitable firmware found! [ 14.919783] iwlwifi 0000:01:00.0: PCI INT A disabled [ 2868.960807] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_idt rfcomm bnep bluetooth parport_pc ppdev binfmt_misc hid_logitech_dj usbhid hid joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq hp_wmi sparse_keymap hp_accel lis3lv02d input_polldev snd_timer snd_seq_device wmi iwlwifi snd mac80211 i915 cfg80211 rts_pstor(C) drm_kms_helper drm uvcvideo videodev psmouse soundcore mei(C) v4l2_compat_ioctl32 mac_hid serio_raw snd_page_alloc i2c_algo_bit video lp parport atl1c

  Read the article

• Great opportunity to try Windows Azure over the next 7 days if you are a UK developer &ndash; act to

  - by Eric Nelson

  Are you a UK based developer who has been put off from trying out the Windows Azure Platform? Were you concerned that you needed to hand over credit card details even to use the introductory offer? Or concerned about how many charges you might run up as you played with “elastic computing”. Then we might have just what you need. 7 Days of access to the Windows Azure Platform – for FREE (expires June 6th 2010) If you are accepted, you will be given a Windows Azure Platfom subscription that will enable you to create Windows Azure hosted services and storage accounts, SQL Azure databases and AppFabric services without any fear of being charged between now and Sunday the 6th of June 2010. No credit card is required. Important: At the end of Sunday your subscription and all your code and data you have uploaded will be deleted. It is your responsibility to keep local copies of your code and data. Apply now To apply for this offer you need to: email ukdev AT microsoft.com with a subject line that starts “UKAZURETRAIL:” (This must  be present) In the email you need to demonstrate you are UK based (.uk email alias or address or… be creative) And you must include 30 to 100 words explaining What your interest is in the Windows Azure Platform and Cloud Computing What you would use the 7 days to explore Some notes (please read!): We have a limited number of these offers to give away on a first come, first served basis (subject to meeting the above criteria). We plan to process all request asap – but there is a UK bank holiday weekend looming. We will do our best to process all by Tues afternoon (which would still give you 5 days of access) There will be no specific support for this offer. We will not be processing any requests that arrive after Tuesday 1st. In case you were wondering, there is no equivalent offer for developer outside of the UK. This offer is a direct result of UK based training we are currently doing which has some spare Azure capacity which we wanted to make best use of. Sorry in advance if you based outside of the UK. Related Links: If you are UK based, you should also join the UK Windows Azure Platform community http://ukazure.ning.com Microsoft UK Windows Azure Platform page

  Read the article

• SQL SERVER – Free eBook Download – EPUB, MOBI, PDF Format

  - by pinaldave

  Microsoft has released recently free eBooks on various Microsoft Technology. The best part is that all these books are available in ePub, Mobi and PDF. You can download them to your local machine or eBook reader and read them. This is a great start as many important subjects are now covered and converted into an eBook. I personally read through a few of the books and found they are very comprehensive and and detailed. The goal is not to cover complete technology in a single book but rather pick a single topic and discuss it in detail. The source of the book is white paper, Technet wiki as well book online and it is clearly listed right bellow the book title. Following are the books available for SQL Server Technology and I encourage all of you to have a look at them as they are great resources. Master Data Services Capacity Guidelines Microsoft SQL Server AlwaysOn Solutions Guide for High Availability and Disaster Recovery Microsoft SQL Server Analysis Services Multidimensional Performance and Operations Guide QuickStart: Learn DAX Basics in 30 Minutes SQL Server 2012 Transact-SQL DML Reference You can download above eBooks from here. This is indeed a great attempt as each book talks about the a single subject in depth keeping author focus on the single and simple subject. I have previously written two books by focusing on the same subject and I had great pleasure writing it as well. Writing on focus subjects gives complete freedom to author to explore the a single subject without having burden to cover everything which is associated with that technology at large. Just like eBooks mentioned earlier my SQL Server Wait Stats was inspired from my article series on SQL Wait Stats. The latest book SQL Server Interview Question and Answers was derived from my article series on SQL Interview Q and A. Writing book is an absolutely different concept than writing blog posts. When I was converting my blog posts to books, I ended up writing 50% new material and end up removing many repetitive content which shows up in blog series. It was indeed fun to focused book at the same time it was a great learning experience as an individual. Reference: TechNet Wiki, Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Documentation, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Memory Glutton

  - by AreYouSerious

  I have to admit that I can't get enough storage. I have hard drives just sitting around in case I need to move somthing, or I'm going to a friends and either they want something I have or I want something they might have. What I'm going to talk about today is cost effective memory for devices. I don't know how this particualr device will work in a camera, as That's not what I use in my camera, in fact I don't have a camera that doesn't either use SD, or the old compact flash card, that's not so compact anymore. There's this thing that uses two micro sd cards to double the capacity of your memory, and it costs about 4 bucks, without the Micro SD card. I have had one for about a year and was going to throw it away because I couldn't get it to work with my computer, or with my Sony Reader. However I found out by one last ditch effort that this thing works beautifully with my Sony PSP. there is no software to speak of associated with this thing, you simply put in two SD cards of the same size... (if you put in two different sizes it will still work, you'll only double the smallest cards size though) and format through the psp. Viola you know have a 29 GB memory card for your PSP. why is this important ? well for starters you can carry more music and more videos. Second if you have gone the way of the hacker.... you can store more games on your card... There are just a few things you have to note.... I speak from experience... you have to use the usb connection to the PSP to do any file moving, as I said previously said card doesn't play well with my computers or card readers... I not saying it won't work at all, just hasn't work with anything I own. Second. If for some reason you try to Hack/crack your PSP don't attempt to delete a game from the psp, use the usb file browser to remove games. if you delete from the PSP you are likely to have to move all your files off, reformat and start again... just a couple things I have noticed... if I had done something like that.   anyway, Here's a link.... http://www.photofast-adapter.com/  and if you want to buy one, get it off ebay, I've seen them as low as $1.99

  Read the article

• A Hot Topic - Profitability and Cost Management

  - by john.orourke(at)oracle.com

  Maybe it's due to the recent recession, or current economic recovery but a hot topic and area of focus for many organizations these days is profitability and cost management.  For most organizations, aggressive cost-cutting and cost management were critical to remaining profitable while top line revenue was flat or shrinking.  However, now we are seeing many organizations taking a more "surgical" approach to profitability and cost management, by accurately allocating revenue and costs to individual product lines, services, customer segments, locations, channels and other lines of business to understand which ones are truly profitable and which ones are not.  Based on these insights, managers can make more informed decisions about which products or services to invest in or retire, how to price their products or services for different customer segments, and where to focus their marketing and customer service resources. The most common industries where this product, service and customer-focused costing and profitability analysis is being adopted include financial services, consumer packaged goods, retail and manufacturing.  However we are seeing adoption of profitability and cost management applications in other industries and use cases.  Here are a few examples: Telecommunications Industry:  Network Costing and Management to identify the most cost effective and/or profitable network areas, to optimize existing resources, infrastructure and network capacity.  Regulatory Cost Accounting to perform more accurate allocations of revenue and costs across services and customer segments, improve ability to set billing rates for future periods, for various products and customer segments and more easily develop analysis needed for rate case proposals. Healthcare Insurance:  Visually, justifiable Medical Loss Ratio results, better knowledge of the cost to service healthcare plans and members, accurate understanding of member segment and plan profitability, improved marketing programs through better member segmentation. Public Sector:  Statutory / Regulatory Compliance:  A variety of statutory and regulatory documents state explicitly or implicitly that the use of government resources must be properly tracked and tied to performance goals.  Managerial costing methods implemented through Cost Management applications provide unparalleled visibility into costs and shared services usage throughout a Public Sector agency. Funding Support:  Regulations require public sector funding requests to be evaluated based upon the ability to achieve performance goals against the associated cost.   Improved visibility and understanding of costs of different programs/services means that organizations can demonstrably monitor performance and the associated resource costs improve the chances of having their funding requests granted. Profitability and Cost Management is one of the fastest-growing solution areas in Oracle's Enterprise Performance Management product line and we are seeing a growing number of customer successes across geographies and industries.  Listed below are just a few examples.  Here's a link to the replay from a recent webcast on this topic which featured Schroders Plc, a UK-based Financial Services company: http://www.oracle.com/go/?&Src=7011668&Act=168&pcode=WWMK10037859MPP043 Here's a link to a case study on Shenhua Guohua Power in China: http://www.oracle.com/us/corporate/customers/shenhua-snapshot-159574.pdf Here's a link to information on Oracle's web site about our profitability and cost management solutions: http://www.oracle.com/us/solutions/ent-performance-bi/performance-management/profitability-cost-mgmt/index.html

  Read the article

• Wireless not working on Dell Inspirion 1501 after upgrading to Ubuntu 12.04 tried steps in other threads

  - by mark burton

  I updated to Ubuntu 12.04 and now my wireless is not working. No icon for it. Tried some of the troubleshooting in other threads but can't get it to work. Would really appreciate any help Thanks! " *-network description: Network controller product: BCM4311 802.11a/b/g vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 02 serial: 00:19:b9:5c:d1:52 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=10.0.0.6 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff " lsub results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS482 [Radeon Xpress 200M] 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01) rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• atkbd.c spamming the logs. How to get rid? what is this?

  - by turbo

  On my Vostro 1000 notebook the following messages spam my dmesg: [18678.728936] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18678.728941] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18679.831109] atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [18679.831119] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18679.841607] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18679.841615] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18680.901733] atkbd.c: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0). [18680.901744] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. [18680.911536] atkbd.c: Unknown key released (translated set 2, code 0x8d on isa0060/serio0). [18680.911546] atkbd.c: Use 'setkeycodes e00d <keycode>' to make it known. It's most probably not from an actual key because it appears in regular intervals. First what is it? It could be my battery since it's nearly dead, as in loadable to 11 % of the initial capacity, but I have no evidence for that. What is this / how can I find out where this comes from? How can I get rid of it? Is there a 'dud' keycode? When I assign a keycode with sudo setkeycode e00d $(random keycode) the key does actually get pressed. That makes it impossible to enter sudo password for example. So any 'real' keycode is not an option. It hasn't been like that half a year ago. Even better than the dud keycode would be a real fix. It happens from 10.04 to 12.04 (before that I don't know). I did read zcat /usr/share/doc/udev/README.keymap.txt.gz |less as suggested in the Ubuntu Wiki. /lib/udev/findkeyboards && sudo /lib/udev/keymap -i input/event5 produces what appears to be newlines in rapid succession. sudo udevadm monitor doesn't show the event.

  Read the article

• What are these errors when I try to "make" the driver of my wireless adapter?

  - by Tom Brito

  I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

  Read the article

• Intel Centrino Wireless N 1000 doesn't work on a Lenovo Z560

  - by Timetraveler

  I upgraded my Ubuntu 11.04 to 11.10 and my Wifi has stopped working. I have a Lenovo Z560 that has Intel centrino wireless-N 1000. I have searched various threads having similar problems for a solution and have no success. The wlan0 is not even showing up in rfkill. Please help me find a solution. I am giving below the output of various debug commands. Thanks in advance. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" ----##uname -a Linux gurucharapathy-laptop 3.0.0-17-generic-pae #30-Ubuntu SMP Thu Mar 8 17:53:35 UTC 2012 i686 i686 i386 GNU/Linux ----##lspci -nnk | grep -iA2 net 05:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Kernel modules: iwlagn 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 ----##iwconfig lo no wireless extensions. eth0 no wireless extensions. ----##iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. ----##rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no ----##lsmod Module Size Used by rfcomm 38408 8 bnep 17923 2 parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 snd_hda_codec_hdmi 31426 1 snd_hda_codec_conexant 52460 1 uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec joydev 17393 0 snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 i915 509554 9 drm_kms_helper 32889 1 i915 snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28932 2 snd_pcm,snd_seq drm 196290 5 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mei 36466 0 mac80211 393421 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 13575 0 intel_ips 17753 0 btusb 18160 2 i2c_algo_bit 13199 1 i915 soundcore 12600 1 snd bluetooth 148839 23 rfcomm,bnep,btusb cfg80211 172427 1 mac80211 psmouse 63474 0 serio_raw 12990 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm sparse_keymap 13658 1 ideapad_laptop wmi 18744 0 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 2 libahci 25761 1 ahci r8169 47200 0 ----##nm-tool NetworkManager Tool State: asleep Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: r8169 State: unmanaged Default: no HW Address: 88:AE:1D:DE:5F:9C Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on ----##lshw -C network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d6400000-d6401fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:de:5f:9c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.0.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff

  Read the article

• Launching Agile PLM 9.3.3!

  - by Shane Goodwin

  Ten months ago we announced the availability of Agile PLM 9.3.2. Today I have the great pleasure to announce availability of Agile PLM 9.3.3 and AutoVue for Agile PLM 20.2.2 - both are immediately available on Oracle Software Delivery Cloud. In this same timeframe our team has also published Oracle PLM Mobile 1.0, EC MCAD 3.1, and EC MCAD 3.2. Agile PLM 9.3.3 focuses on improving management business processes, improving management of intellectual property, and overall product improvements based on customer feedback. In this short timeframe, we have made very significant progress on all three fronts. The Agile PLM 9.3.3 What’s New Whitepaper discusses all of the new capabilities. Looking forward, we will continue to deliver new releases with laser focus on solving real business problems and making users more productive. With our release of Innovation Management, you will be seeing dramatic new capability to help manage the innovation funnel and the processes to determine what product projects to fund. You will also see us continue this accelerated cadence in releasing new features for Agile PLM. All Agile PLM 9.3.3 Documentation is now available, including an initial version of the Capacity Planning Guide (CPG). As usual, we will be updating the CPG in a few months when we complete our performance and breakpoint testing. Like with other recent Agile PLM versions, the Product Management team has recorded Transfer of Information (TOI) sessions to educate you about the new features. The TOI sessions can be accessed in My Oracle Support on note 1589164.1. As with all other releases, we have also published new versions (1.7.5) of Averify (Patch ID 17583605) and AUT (Patch ID 17583592) in My Oracle Support. Again this year I look forward to seeing many of you at the Oracle Value Chain Summit (February 3-5, San Jose, CA), to talk more about this new release and all of the fascinating ways our customers and partners are driving business value with Agile PLM. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

  Read the article

• Need help to install Ubuntu on Win7 Alienware M17xR3, installing not working

  - by Rodrigo

  Please I need help to install linux on my computer to start analyzing Next Generation Sequencing (molecular genetics) for my work. I've tried to install from all different ways and forms and it gave me different errors. First I will describe my system: Alienware M17x R3 Raid Drive 596GB (2x 298 GB) Windows7 primary partition C: The hardrive is divided in 3 primary partitions (can't do 4 don't know why) 1st: Fat16 no name capacity 40mbs almost not used (has files like command.com, dellbio.bin, dellrmk.bin and oobedone.flg) I dont know what this is for but is blocked and non system (Status:none). 2nd: Recovery NTFS 9GB (Status:system) and it seems to have boot files. 3rd: CD: Windos OS (status:boot). And I have 2 Logical drivers F: data for backup and games :D (300gb) G: For trying to install the Linux (Already tried with Fat32, Ext2, ext3 and ext4) Installing with Wubi on F: and G: Instalation looks good on windows ask to restart dos mode appears: try (HD0,0) non-ms:skip try (HD0,1) NTFS5: No Wibildr try (HD0,2) NTFS5: Error: "Prefix" is not set. Installing with Wubi on C: Installation looks good on windows ask to restart dos mode apears: Mount denied becouse NTFS volume is already exclusive opened, the volume may be already mounted or another software may use it which could be identified for example by the help of the 'FUSER' command Mount devdm-4 Could not find installation files /ubuntu/install custom-installation Run 'Chkdsk /r' on windows and restart...blablablalba... that should correct. done this didn't work. Tried installing with USB drive and after burning a CD with the Iso file download from the official website: I've tried the option to install along windows with a G: drive in FAT32, EXT2,3 and 4, I've tried to leave unallocated data, without the driver G at all... appears this everytime: http://i.stack.imgur.com/eo2Ie.png pres ok it ask me to: Not possible to install the boot loader at the location: specify new location: I've tried to select all the drivers non is accepted If I ask to continue without installing the boot loader he ask me to install later by myself which I'm trying to figure it out but I'm not really good to understand how ppl get to the programming part like a DOS to write down couse I'm a newb and I've dont work on dos or linux before... I've read that the boot loader has to be installed on the primary partition, but I'm not sure what I can delete from those 2 partitions that would let me get 1 extra... and it seems that the one that windows use is protected to write down so the software is not touching it... Please if someone have any idea to help me out... I've got a course tomorrow of how to use the software to analyze the data and I wanted to take my computer with me, so I've passed the last 3 days trying to search different ways to solve. My question is also post on the bugs.launchpad.net link here: lounchpad.net bug #882695

  Read the article

• Where Are You on the Visualization Maturity Curve?

  - by Celine Beck

  The old phrase “A picture is worth a thousand words” is as true now as ever. Providing the right users with access to the right product data, at the right time, can provide significant benefits to a business. This is especially evident with increasing technical and product complexities, elongated supply chains, and growing pressure to bring innovative products to market faster. With this in mind, it is easy to understand why visualization is an integral part of any successful product lifecycle management (PLM) strategy. At a bare minimum, knowledge workers use multiple individual documents of different formats and structure, and leverage visualization solutions to access information; but the real value of visualization can be fully reaped when it is connected to enterprise applications like PLM and tied to the appropriate business context. The picture below illustrates this visualization maturity curve, as we presented during the last Oracle Open World and the transformational effect that visualization can have on PLM processes and performance (check out the post about AutoVue Key Highlights from Oracle Open World 2012 for more information). Organizations are likely to see greater positive impact on business performance when visualization is connected to enterprise systems, allowing access to information coming from multiple sources, such as PLM, supply chain management (SCM) and enterprise resource planning (ERP). This allows organizations to reach higher levels of collaboration and optimize decision-making capacity as users can benefit from in-context access to visual information. For instance, within a PLM system, a design engineer can access a product assembly and review digital annotations added by other users specific to the engineering change request he is reviewing rather than all historical annotations. The last stage on the curve is what we call augmented business visualization (ABV).  ABV is an innovative framework which lets structured data (from Oracle’s Agile PLM for instance) interact with unstructured data (documents, design, 3D models, etc). With this new level of integration, information coming from multiple sources can be presented in a highly visual fashion; color displays can be used in order to identify parts with specific characteristics (for example pending quality issues) and you can take actions directly from within the context of documents and designs, maximizing user productivity. Those who had the chance to attend our PLM session during Oracle Open World already got a sneak peek of our latest augmented business visualization for Oracle’s Agile PLM. The solution generated a lot of wows. Stephen Porter, CEO at Zero Wait State, indicated in a post entitled “The PLM State: the Manhattan Project-Oracle’s Next Big Secret Weapon” that “this kind of synergy between visualization and PLM could qualify as a powerful weapon differentiating Agile PLM from other solutions.” If you are interested in learning more about ABV for Oracle’s Agile PLM and hear about real examples of usage of visualization at all stages of the visualization maturity curve, don’t miss our Visual Decision Making to Optimize New Product Development and Introduction session during the Oracle Value Chain Summit (Feb. 4-6, 2013, San Francisco). We look forward to seeing you there!

  Read the article

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• Should custom data elements be stored as XML or database entries?

  - by meteorainer

  There are a ton of questions like this, but they are mostly very generalized, so I'd like to get some views on my specific usage. General: I'm building a new project on my own in Django. It's focus will be on small businesses. I'd like to make it somewhat customizble for my clients so they can add to their customer/invoice/employee/whatever items. My models would reflect boilerplate items that all ModelX might have. For example: first name last name email address ... Then my user's would be able to add fields for whatever data they might like. I'm still in design phase and am building this myself, so I've got some options. Working on... Right now the 'extra items' models have a FK to the generic model (Customer and CustomerDataPoints for example). All values in the extra data points are stored as char and will be coerced/parced into their actual format at view building. In this build the user could theoretically add whatever values they want, group them in sets and generally access them at will from the views relavent to that model. Pros: Low storage overhead, very extensible, searchable Cons: More sql joins My other option is to use some type of markup, or key-value pairing stored directly onto the boilerplate models. This coul essentially just be any low-overhead method weather XML or literal strings. The view and form generated from the stored data would be taking control of validation and reoganizing on updates. Then it would just dump the data back in as a char/blob/whatever. Something like: <datapoint type='char' value='something' required='true' /> <datapoint type='date' value='01/01/2001' required='false' /> ... Pros: No joins needed, Updates for validation and views are decoupled from data Cons: Much higher storage overhead, limited capacity to search on extra content So my question is: If you didn't live in the contraints impose by your company what method would you use? Why? What benefits or pitfalls do you see down the road for me as a small business trying to help other small businesses? Just to clarify, I am not asking about custom UI elements, those I can handle with forms and template snippets. I'm asking primarily about data storage and retreival of non standardized data relative to a boilerplate model.

  Read the article

• eSTEP Newsletter October 2012 now available

  - by uwes

  Dear Partners,We would like to inform you that the October '12 issue of our Newsletter is now available.The issue contains information to the following topics:News from CorpOracle Announces Oracle Solaris 11.1 at Oracle OpenWorld; Oracle Announces Oracle Exadata X3 Database In-Memory Machine; Oracle Enterprise Manager 12c introduces New Tools and Programs for Partners; Oracle Unveils First Industry-Specific Engineered System - the Oracle Networks Applications Platform,;  Oracle Unveils Expanded Oracle Cloud Offerings; Oracle Outlines Plans to Make the Future Java During JavaOne 2012 Strategy Keynote; Some interesting Java Facts and Figures; Oracle Announces MySQL 5.6 Release Candidate Technical Section What's up with LDoms (4 tech articles); Oracle SPARC T4 Systems cut Complexity, cost of Cryptographic Tasks; PeopleSoft Enterprise Financials 9.1; PeopleSoft HCM 9.1 combined online and batch benchmark,; Product Update Bulletin Oracle Solaris Cluster Oct 2012; Sun ZFS Storage 7420; SPARC Product Line Update; SPARC M-series -  New DAT 160 plus EOL of M3000 series; SPARC SuperCluster and SPARC T4 Servers Included in Enterprise Reference Architecture Sizing Tool; Oracle MagazineLearning & EventsRecently delivered Techcasts: An Update after the Oracle Open World, An Update on OVM Server for SPARC; Update to Oracle Database ApplianceReferencesBridgestone Aircraft Tire Reduces Required Disk Capacity by 50% with Virtualized Storage Solution; Fiat Group Automobiles Aligns Operational Decisions with Strategy by Using End-to-End Enterprise Performance Management System; Birkbeck, University of London Develops World-Class Computer Science Facilities While Reducing Costs with Ultrareliable and Scalable Data Infrastructure How toIntroducing Oracle System Assistant; How to Prepare a ZFS Storage Appliance to Serve as a Storage Device; Migrating Oracle Solaris 8 P2V with Oracle Database 10.2 and ASM; White paper on Best Practices for Building a Virtualized SPARC Computing Environment, How to extend the Oracle Solaris Studio IDE with NetBeans Plug-Ins; How I simplified Oracle Database 11g Installation on Oracle Linux 6You find the Newsletter on our portal under eSTEP News ---> Latest Newsletter. You will need to provide your email address and the pin below to get access. Link to the portal is shown below.URL: http://launch.oracle.com/PIN: eSTEP_2011Previous published Newsletters can be found under the Archived Newsletters section and more useful information under the Events, Download and Links tab. Feel free to explore and any feedback is appreciated to help us improve the service and information we deliver.Thanks and best regards,Partner HW Enablement EMEA

  Read the article

• How to execute a Ruby file in Java, capable of calling functions from the Java program and receiving primitive-type results?

  - by Omega

  I do not fully understand what am I asking (lol!), well, in the sense of if it is even possible, that is. If it isn't, sorry. Suppose I have a Java program. It has a Main and a JavaCalculator class. JavaCalculator has some basic functions like public int sum(int a,int b) { return a + b } Now suppose I have a ruby file. Called MyProgram.rb. MyProgram.rb may contain anything you could expect from a ruby program. Let us assume it contains the following: class RubyMain def initialize print "The sum of 5 with 3 is #{sum(5,3)}" end def sum(a,b) # <---------- Something will happen here end end rubyMain = RubyMain.new Good. Now then, you might already suspect what I want to do: I want to run my Java program I want it to execute the Ruby file MyProgram.rb When the Ruby program executes, it will create an instance of JavaCalculator, execute the sum function it has, get the value, and then print it. The ruby file has been executed successfully. The Java program closes. Note: The "create an instance of JavaCalculator" is not entirely necessary. I would be satisfied with just running a sum function from, say, the Main class. My question: is such possible? Can I run a Java program which internally executes a Ruby file which is capable of commanding the Java program to do certain things and get results? In the above example, the Ruby file asks the Java program to do a sum for it and give the result. This may sound ridiculous. I am new in this kind of thing (if it is possible, that is). WHY AM I ASKING THIS? I have a Java program, which is some kind of game engine. However, my target audience is a bunch of Ruby coders. I don't want to have them learn Java at all. So I figured that perhaps the Java program could simply offer the functionality (capacity to create windows, display sprites, play sounds...) and then, my audience can simply code with Ruby the logic, which basically justs asks my Java engine to do things like displaying sprites or playing sounds. That's when I though about asking this.

  Read the article

• Pay in the future should make you think in the present

  - by BuckWoody

  Distributed Computing - and more importantly “-as-a-Service” models of computing have a different cost model. This is something that sounds obvious on the surface but it’s often forgotten during the design and coding phase of a project. In on-premises computing, we’re used to purchasing a server and all of the hardware infrastructure and software licenses needed not only for one project, but several. This is an up-front or “sunk” cost that we consume by running code the organization needs to perform its function. Using a direct connection over wires you’ve already paid for, we don’t often have to think about bandwidth, hits on the data store or the amount of compute we use - we just know more is better. In a pay-as-you-go model, however, each of these architecture decisions has a potential cost impact. The amount of data you store, the number of times you access it, and the amount you send back all come with a charge. The offset is that you don’t buy anything at all up-front, so that sunk cost is freed up. And financial professionals know that money now is worth more than money later. Saving that up-front cost allows you to invest it in other things. It’s not just that you’re using things that now cost money - it’s that the design itself in distributed computing has a cost impact. That can be a really good thing, such as when you dynamically add capacity for paying customers. If you can tie back the cost of a series of clicks to what a user will pay to do so, you can set a profit margin that is easy to track. Here’s a case in point: Assume you are using a large instance in Windows Azure to compute some data that you retrieve from a SQL Azure database. If you don’t monitor the path of the application, you may not know what you are really using. Since you’re paying by the size of the instance, it’s best to maximize it all the time. Recently I evaluated just this situation, and found that downsizing the instance and adding another one where needed, adding a caching function to the application, moving part of the data into Windows Azure tables not only increased the speed of the application, but reduced the cost and more closely tied the cost to the profit. The key is this: from the very outset - the design - make sure you include metrics to measure for the cost/performance (sometimes these are the same) for your application. Windows Azure opens up awesome new ways of doing things, so make sure you study distributed systems architecture before you try and force in the application design you have on premises into your new application structure.

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Creating and using Distribution Groups

  - by The Old Toxophilist

  By default running your Exalogic in a Virtual provides you with, what to Cloud Users, is a single large resource and they can just create vServers and not care about how they are laid down on the the underlying infrastructure. All the Cloud Users will know is that they can create vServers. For example if we have a Quarter Rack (8 Nodes) and our Cloud User creates 8 vServers those 8 vServers may run on 8 distinct nodes or may all run on the same node. Although in many cases we, as Cloud Users, may not be to worried how the Virtualisation Algorithm decides where to place our vServers there are cases where it is extremely important that vServers run on distinct physical compute nodes. For example if we have a Weblogic Cluster we will want the Servers with in the cluster to run on distinct physical node to cover for the situation where one physical node is lost. To achieve this the Exalogic Virtualised implementation provides Distribution Groups that define and anti-aliasing policy that the underlying Virtualisation Algorithm will take into account when placing vServers. It should be noted that Distribution Groups must be created before you create vServers because a vServer can only be added to a Distribution Group at creation time. Creating A Distribution Group To create a Distribution Groups we will first need to select the Account in which we want the Distribution Group to be created. Once we have selected the account we will see the Interface update and Account specific Actions will be displayed within the Action Panes. From the Action pane (or Right-Click on the Account) select the "Create Distribution Group" action. This will initiate the create wizard as follows. Distribution Group Details Within the first Step of the Wizard we can specify the name of the distribution group and this should be unique. In addition we can provide a detailed description of the group. Distribution Group Configuration The second step of the configuration wizard allows you to specify the number of elements that are required within this group and will specify a maximum of the number of nodes within you Exalogic. At this point it is always better to specify a group with spare capacity allowing for future expansion. As vServers are added to group the available slots decrease. Summary Finally the last step of the wizard display a summary of the information entered.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >