Search Results

Search found 1788 results on 72 pages for 'debugger'.

Page 32/72 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Tomcat startup.sh doesn't work

    - by OMG Ponies
    I've just installed Tomcat 6.0.20 (per Jira documentation recommendation) on RedHat EL 5 Server, and attempts to use: bin] # ./startup.sh ...result in: Using CATALINA_BASE: /opt/software/jira-tomcat-6.0.20 Using CATALINA_HOME: /opt/software/jira-tomcat-6.0.20 Using CATALINA_TMPDIR: /opt/software/jira-tomcat-6.0.20/temp Using JRE_HOME: /etc/alternatives/jre Usage: catalina.sh ( commands ... ) commands: debug Start Catalina in a debugger ... version What version of tomcat are you running? I've edited the catalina.sh file to add: echo $0 echo $1 ...and I see: catalina.sh start ...etc when I use: ./catalina.sh start Why does catalina.sh not use the parameter?

    Read the article

  • How to make Windows display application crashes in the console?

    - by Name is carl
    I'm developping a C application on Windows 7 64 bits, and each time it crashes I get the following dialog: I would prefer something more "old school" with the complete error dumped in the console. Something like > HelloWorld The application has crashed in somedll.dll for some Horrible C reason. I have an error code 0x4445506 And a kinda stacktrace And walls of hexa 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 0x4445506 Is there a way to get that? Should I run my application with a command line debugger ? Note: should I post this on Stackoverflow instead?

    Read the article

  • How can I stop ntbackup requiring my new password every time I'm forced to change my Windows passwor

    - by Lunatik
    I have a scheduled job that runs each night using ntbackup which copies a folder on my HDD to a network share. The problem is that every time I'm required to change my Windows password I have to remember to change it in ntbackup aswell, otherwise the backup fails silently i.e. I get no warning that the backup isn't being done. Is there a way to schedule this job so it will automatically pick up my new Windows password, or somehow not be tied to my main login? My user account type is Debugger, not full Administrator, so I'm not sure if that would restrict me in any way, e.g. still forcing a four-weekly password change on a dedicated user account for this. The PC runs XP SP2 on a Windows Server 2003 R2 domain.

    Read the article

  • Unkillable process problem

    - by skevar7
    I closed application, but the process remained in the list. I try to stop in from the task manager, but nothing happens. No error messages, process just stays in the list. I try to debug it, but the debugger says: Unable to attach to the crashing process. The requested operation is not supported. This happens with VS2008 and some other programs, sometimes. What? The? Hell? How to kill it?

    Read the article

  • The letter 'W' gets rendered oddly

    - by Jeff E
    It seems that with this particular font (it's one of the Ubuntu fonts; I can't tell which one exactly because Chrome's debugger doesn't tell me which font-family won the CSS battle) the letter 'W' (both cases), at the default zoom level and typically with smaller sizes, will render very oddly: (open the image in a new tab) The right-hand side of the letter is totally wrong. Changing the zoom levels will mitigate (but not eliminate) the issue. Does anyone know how to fix this? It doesn't happen on Firefox or IE so I assume it's not an issue with the font itself.

    Read the article

  • Xcode/iPhone Development 6 months in - Annoyances

    - by clearbrian
    Hi I've been iPhone programming for 6 months and come from a PC/Java/Eclipse background and still have a few annoyances with Xcode/iPhone programming I wonder are there any shortcuts to. Is there any way to prevent multiple windows opening all the time in XCode? a) When you click on the Errors/Warnings in the bottom right of the status bar build errors are shown in separate window. Any way to get these to show in the main editor? b) Anyway to get debugger to appear in main editor. I have a big screen iMac and it's still window hell on Macs. When you come from Alt-Tab the Mac is a nightmare. 2) Anyway to get a toolbar item on the main editor to: a) Open Console (I know CMD-thingy-R) b) Open Break points (you have to open Debugger first then breakpoints) I know there's keyboard shortcuts but I have only left hand free others on the trackball so any keys on right hand side of keyboard are too far. I know you can add Finder toolbar scripts (just wondering if anyway to extend Xcode). Are there utilities to extend Xcode? Scripts/Automator/Any Services I can setup to help. Can you automate Xcode like you can with Windows/ActiveX/VBA 3) Limit lookups using CMD + double click. If I double click on a variable to find its definition using CMD + double click it shows every occurrence of all variables with that name. (annoying it you name all you maps mapView) Anyway to get it to limit to the current class or at least order so current class is first. 4) Find doesn't seem to loop backwards if result all above cursor position I'm in a class and I hit CMD + F for find. Find box appears. I enter some text hit return. It says I have x matches but only back arrow is highlight in Find But when I hit < it does nothing. I need to scroll to the top and redo the search. If the text is both forwards and backwards then both < are highlighted and it works. is this a bug or a 'feature' Missing Eclipse features I have been looking at the User Script menu but was wondering how powerful they are? 5) any scripts around to generate source from members such as description: @property @synthesize if I add a new member, run a script will generate @property/@syntesize and release in dealloc 7) any good sites for scripts? SCM Im having problems with SCM and Folders on HD under project Classes directory. You get a library e.g. JSON. It usually comes as a folder. You copy it to the /Classes for your project. /Classes/JSON I create a Group for the Library in Xcode under Classes group. Classes JSON I drag the files from the folder into xcode into the JSON Group. I add them to the SCM and icon changes from ? to A but if I try and commit them it say folder /JSON is not under SCM. Can you drag a folder into Xcode so that it AND its files get included in SCM? Anyway to stop Xcode Help from being on top all the time. I keep feeling like punching it and telling it to get out of the way! :) I dont mind it open just not in the way once I've finished. Yes I know I can Ctrl-W Sites: the main site I use to learn Obj-C are : stackoverflow.com Google code Search - tonnes of full apps on here http://www.iphonedevsdk.com/forum/iphone-sdk-development/ Apple Developers Forums (anyway to get RSS feed to these or is that blasphemy :) ) Safari - 100s of IT book though prob too many to keep up :) any others? Any site that gives simple examples for Obj-C/ UIKit The docs just show the methods but actual examples (Google code search has helped a lot here)

    Read the article

  • How to solve a deallocated connection in iPhone SDK 3.1.3? - Streams - CFSockets

    - by Christian
    Hi everyone, Debugging my implementation I found a memory leak issue. I know where is the issue, I tried to solve it but sadly without success. I will try to explain you, maybe someone of you can help with this. First I have two classes involved in the issue, the publish class (where publishing the service and socket configuration is done) and the connection (where the socket binding and the streams configuration is done). The main issue is in the connection via native socket. In the 'publish' class the "server" accepts a connection with a callback. The callback has the native-socket information. Then, a connection with native-socket information is created. Next, the socket binding and the streams configuration is done. When those actions are successful the instance of the connection is saved in a mutable array. Thus, the connection is established. static void AcceptCallback(CFSocketRef socket, CFSocketCallBackType type, CFDataRef address, const void *data, void *info) { Publish *rePoint = (Publish *)info; if ( type != kCFSocketAcceptCallBack) { return; } CFSocketNativeHandle nativeSocketHandle = *((CFSocketNativeHandle *)data); NSLog(@"The AcceptCallback was called, a connection request arrived to the server"); [rePoint handleNewNativeSocket:nativeSocketHandle]; } - (void)handleNewNativeSocket:(CFSocketNativeHandle)nativeSocketHandle{ Connection *connection = [[[Connection alloc] initWithNativeSocketHandle:nativeSocketHandle] autorelease]; // Create the connection if (connection == nil) { close(nativeSocketHandle); return; } NSLog(@"The connection from the server was created now try to connect"); if ( ! [connection connect]) { [connection close]; return; } [clients addObject:connection]; //save the connection trying to avoid the deallocation } The next step is receive the information from the client, thus a read-stream callback is triggered with the information of the established connection. But when the callback-handler tries to use this connection the error occurs, it says that such connection is deallocated. The issue here is that I don't know where/when the connection is deallocated and how to know it. I am using the debugger, but after some trials, I don't see more info. void myReadStreamCallBack (CFReadStreamRef stream, CFStreamEventType eventType, void *info) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; Connection *handlerEv = [[(Connection *)info retain] autorelease]; // The error -[Connection retain]: message sent to deallocated instance 0x1f5ef0 (Where 0x1f5ef0 is the reference to the established connection) [handlerEv readStreamHandleEvent:stream andEvent:eventType]; [pool drain]; } void myWriteStreamCallBack (CFWriteStreamRef stream, CFStreamEventType eventType, void *info){ NSAutoreleasePool *p = [[NSAutoreleasePool alloc] init]; Connection *handlerEv = [[(Connection *)info retain] autorelease]; //Sometimes the error also happens here, I tried without the pool, but it doesn't help neither. [handlerEv writeStreamHandleEvent:eventType]; [p drain]; } Something strange is that when I run the debugger(with breakpoints) everything goes well, the connection is not deallocated and the callbacks work fine and the server is able to receive the message. I will appreciate any hint!

    Read the article

  • CustomValidatation control that fire on multiple control events

    - by George
    I am trying to create a UserControl that is a composite control for entering Dates. It involves 2 drop down controls (one for month and one for day) and a text box for year. It also has a CustomValidation control that I would like the user of the UserControl to be able to set the ClientValidationFunction property and have it triggered whenever the value in any of the 3 date part controls changes. To hook up each of the 3 controls to the validation control, I use teh AJAX ValidatorHookupControlID method. If I hard code the following code directly in my aspx page that houses the usercontrol, my Client Validation Function is successfulluy called when any of the 3 date part control values are changed: <script type="text/javascript"> //<![CDATA[ debugger; alert('hooking up'); ValidatorHookupControlID("ctl00_phPageContent_dtmPassportExpirationDate_txtYear", document.all("ctl00_phPageContent_dtmPassportExpirationDate_CustomValidator1")); ValidatorHookupControlID("ctl00_phPageContent_dtmPassportExpirationDate_ddlDate", document.all("ctl00_phPageContent_dtmPassportExpirationDate_CustomValidator1")); ValidatorHookupControlID("ctl00_phPageContent_dtmPassportExpirationDate_ddlMonth", document.all("ctl00_phPageContent_dtmPassportExpirationDate_CustomValidator1")); //]]> However, I would like my usercontrol to emit this Javascript, so I added the following Code. Public Property ClientValidationFunction() As String Get Return CustomValidator1.ClientValidationFunction End Get Set(ByVal value As String) CustomValidator1.ClientValidationFunction = value End Set End Property Public Property EnableClientScript() As Boolean Get Return CustomValidator1.EnableClientScript End Get Set(ByVal value As Boolean) CustomValidator1.EnableClientScript = value End Set End Property Protected Sub Page_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.PreRender If Me.ClientValidationFunction.Trim <> "" AndAlso Me.EnableClientScript Then RegisterValidationScript() End If End Sub Private Sub RegisterValidationScript() Dim Key As String = Me.ClientID & "_ClientValidate" If Not Page.ClientScript.IsClientScriptBlockRegistered(Key) Then Page.ClientScript.RegisterClientScriptBlock(GetType(String), Key, GetJavascript, True) End If End Sub Private Function GetJavascript() As String Dim Out As String = "" Const Quote As String = Chr(34) Out &= "debugger;" & vbCrLf Out &= "ValidatorHookupControlID(" & Quote & txtYear.ClientID & Quote & ", document.all(" & Quote & CustomValidator1.ClientID & Quote & "));" & vbCrLf Out &= "ValidatorHookupControlID(" & Quote & ddlDate.ClientID & Quote & ", document.all(" & Quote & CustomValidator1.ClientID & Quote & "));" & vbCrLf Out &= "ValidatorHookupControlID(" & Quote & ddlMonth.ClientID & Quote & ", document.all(" & Quote & CustomValidator1.ClientID & Quote & "));" & vbCrLf Return Out End Function Unfortunately, when the ValidatorHookupControlID method is called, the second parameter (the one that locates the validation control) always evaluates to null and the method fails. ValidatorHookupControlID("ctl00_phPageContent_DateSelector21_txtYear", document.all("ctl00_phPageContent_DateSelector21_CustomValidator1")); Can you tell me how to correct this error?

    Read the article

  • jquery with ASP.NET MVC - calling ajax enabled web service

    - by dcp
    This is a bit of a continuation of a previous question. Now I'm trying to make a call to an AJAX enabled web service which I have defined within the ASP.NET MVC application (i.e. the MovieService.svc). But the service is never being called in my getMovies javascript function. This same technique of calling the AJAX web service works ok if I try it in a non ASP.NET MVC application, so it makes me wonder if maybe the ASP MVC routes are interfering with things somehow when it tries to make the AJAX web service call. Do you have any idea why my web service isn't getting called? Code below. <script src="<%= ResolveClientUrl("~/scripts/jquery-1.4.2.min.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/grid.locale-en.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/jquery-ui-1.8.1.custom.min.js") %>" type="text/javascript"></script> <script src="<%= ResolveClientUrl("~/scripts/jquery.jqGrid.min.js") %>" type="text/javascript"></script> <script type="text/javascript"> var lastsel2; function successFunction(jsondata) { debugger var thegrid = jQuery("#editgrid"); for (var i = 0; i < jsondata.d.length; i++) { thegrid.addRowData(i + 1, jsondata.d[i]); } } function getMovies() { debugger // ***** the MovieService#GetMovies method never gets called $.ajax({ url: 'MovieService.svc/GetMovies', data: "{}", // For empty input data use "{}", dataType: "json", type: "GET", contentType: "application/json; charset=utf-8", success: successFunction }); } jQuery(document).ready(function() { jQuery("#editgrid").jqGrid({ datatype: getMovies, colNames: ['id', 'Movie Name', 'Directed By', 'Release Date', 'IMDB Rating', 'Plot', 'ImageURL'], colModel: [ { name: 'id', index: 'Id', width: 55, sortable: false, hidden: true, editable: false, editoptions: { readonly: true, size: 10} }, { name: 'Movie Name', index: 'Name', width: 250, editable: true, editoptions: { size: 10} }, { name: 'Directed By', index: 'Director', width: 250, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'Release Date', index: 'ReleaseDate', width: 100, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'IMDB Rating', index: 'IMDBUserRating', width: 100, align: 'right', editable: true, editoptions: { size: 10} }, { name: 'Plot', index: 'Plot', width: 150, hidden: false, editable: true, editoptions: { size: 30} }, { name: 'ImageURL', index: 'ImageURL', width: 55, hidden: true, editable: false, editoptions: { readonly: true, size: 10} } ], pager: jQuery('#pager'), rowNum: 5, rowList: [5, 10, 20], sortname: 'id', sortorder: "desc", height: '100%', width: '100%', viewrecords: true, imgpath: '/Content/jqGridCss/redmond/images', caption: 'Movies from 2008', editurl: '/Home/EditMovieData/', caption: 'Movie List' }); $("#bedata").click(function() { var gr = jQuery("#editgrid").jqGrid('getGridParam', 'selrow'); if (gr != null) jQuery("#editgrid").jqGrid('editGridRow', gr, { height: 280, reloadAfterSubmit: false }); else alert("Hey dork, please select a row"); }); }); </script> <h2> <%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website"> http://asp.net/mvc</a>. </p> <table id="editgrid"> </table> <div id="pager" style="text-align: center;"> </div> <input type="button" id="bedata" value="Edit Selected" /> Here's my RegisterRoutes code: public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.IgnoreRoute("*MovieService.svc*"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = "" } // Parameter defaults ); } Here's what my MovieService class looks like: namespace jQueryMVC { [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class MovieService { // Add [WebGet] attribute to use HTTP GET [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] public IList<Movie> GetMovies() { return Persistence.GetMovies(); } } }

    Read the article

  • How to figure out who owns a worker thread that is still running when my app exits?

    - by Dave
    Not long after upgrading to VS2010, my application won't shut down cleanly. If I close the app and then hit pause in the IDE, I see this: The problem is, there's no context. The call stack just says [External code], which isn't too helpful. Here's what I've done so far to try to narrow down the problem: deleted all extraneous plugins to minimize the number of worker threads launched set breakpoints in my code anywhere I create worker threads (and delegates + BeginInvoke, since I think they are labeled "Worker Thread" in the debugger anyway). None were hit. set IsBackground = true for all threads While I could do the next brute force step, which is to roll my code back to a point where this didn't happen and then look over all of the change logs, this isn't terribly efficient. Can anyone recommend a better way to figure this out, given the notable lack of information presented by the debugger? The only other things I can think of include: read up on WinDbg and try to use it to stop anytime a thread is started. At least, I thought that was possible... :) comment out huge blocks of code until the app closes properly, then start uncommenting until it doesn't. UPDATE Perhaps this information will be of use. I decided to use WinDbg and attach to my application. I then closed it, and switched to thread 0 and dumped the stack contents. Here's what I have: ThreadCount: 6 UnstartedThread: 0 BackgroundThread: 1 PendingThread: 0 DeadThread: 4 Hosted Runtime: no PreEmptive GC Alloc Lock ID OSID ThreadOBJ State GC Context Domain Count APT Exception 0 1 1c70 005a65c8 6020 Enabled 02dac6e0:02dad7f8 005a03c0 0 STA 2 2 1b20 005b1980 b220 Enabled 00000000:00000000 005a03c0 0 MTA (Finalizer) XXXX 3 08504048 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 4 08504540 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 5 08516a90 19820 Enabled 00000000:00000000 005a03c0 0 Ukn XXXX 6 08517260 19820 Enabled 00000000:00000000 005a03c0 0 Ukn 0:008> ~0s eax=c0674960 ebx=00000000 ecx=00000000 edx=00000000 esi=0040f320 edi=005a65c8 eip=76c37e47 esp=0040f23c ebp=0040f258 iopl=0 nv up ei pl nz na po nc cs=0023 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000202 USER32!NtUserGetMessage+0x15: 76c37e47 83c404 add esp,4 0:000> !clrstack OS Thread Id: 0x1c70 (0) Child SP IP Call Site 0040f274 76c37e47 [InlinedCallFrame: 0040f274] 0040f270 6baa8976 DomainBoundILStubClass.IL_STUB_PInvoke(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32)*** WARNING: Unable to verify checksum for C:\Windows\assembly\NativeImages_v4.0.30319_32\WindowsBase\d17606e813f01376bd0def23726ecc62\WindowsBase.ni.dll 0040f274 6ba924c5 [InlinedCallFrame: 0040f274] MS.Win32.UnsafeNativeMethods.IntGetMessageW(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32) 0040f2c4 6ba924c5 MS.Win32.UnsafeNativeMethods.GetMessageW(System.Windows.Interop.MSG ByRef, System.Runtime.InteropServices.HandleRef, Int32, Int32) 0040f2dc 6ba8e5f8 System.Windows.Threading.Dispatcher.GetMessage(System.Windows.Interop.MSG ByRef, IntPtr, Int32, Int32) 0040f318 6ba8d579 System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) 0040f368 6ba8d2a1 System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame) 0040f374 6ba7fba0 System.Windows.Threading.Dispatcher.Run() 0040f380 62e6ccbb System.Windows.Application.RunDispatcher(System.Object)*** WARNING: Unable to verify checksum for C:\Windows\assembly\NativeImages_v4.0.30319_32\PresentationFramewo#\7f91eecda3ff7ce478146b6458580c98\PresentationFramework.ni.dll 0040f38c 62e6c8ff System.Windows.Application.RunInternal(System.Windows.Window) 0040f3b0 62e6c682 System.Windows.Application.Run(System.Windows.Window) 0040f3c0 62e6c30b System.Windows.Application.Run() 0040f3cc 001f00bc MyApplication.App.Main() [C:\code\trunk\MyApplication\obj\Debug\GeneratedInternalTypeHelper.g.cs @ 24] 0040f608 66c421db [GCFrame: 0040f608] EDIT -- not sure if this helps, but the main thread's call stack looks like this: [Managed to Native Transition] > WindowsBase.dll!MS.Win32.UnsafeNativeMethods.GetMessageW(ref System.Windows.Interop.MSG msg, System.Runtime.InteropServices.HandleRef hWnd, int uMsgFilterMin, int uMsgFilterMax) + 0x15 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.GetMessage(ref System.Windows.Interop.MSG msg, System.IntPtr hwnd, int minMessage, int maxMessage) + 0x48 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame frame = {System.Windows.Threading.DispatcherFrame}) + 0x85 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.PushFrame(System.Windows.Threading.DispatcherFrame frame) + 0x49 bytes WindowsBase.dll!System.Windows.Threading.Dispatcher.Run() + 0x4c bytes PresentationFramework.dll!System.Windows.Application.RunDispatcher(object ignore) + 0x17 bytes PresentationFramework.dll!System.Windows.Application.RunInternal(System.Windows.Window window) + 0x6f bytes PresentationFramework.dll!System.Windows.Application.Run(System.Windows.Window window) + 0x26 bytes PresentationFramework.dll!System.Windows.Application.Run() + 0x1b bytes I did a search on it and found some posts related to WPF GUIs hanging, and maybe that'll give me some more clues.

    Read the article

  • about getadrrinfo() C++?

    - by Isavel
    I'm reading this book called beej's guide to network programming and there's a part in the book were it provide a sample code which illustrate the use of getaddrinfo(); the book state that the code below "will print the IP addresses for whatever host you specify on the command line" - beej's guide to network programming. now I'm curious and want to try it out and run the code, but I guess the code was develop in UNIX environment and I'm using visual studio 2012 windows 7 OS, and most of the headers was not supported so I did a bit of research and find out that I need to include the winsock.h and ws2_32.lib for windows, for it to get working, fortunately everything compiled no errors, but when I run it using the debugger and put in 'www.google.com' as command argument I was disappointed that it did not print any ipaddress, the output that I got from the console is "getaddrinfo: E" what does the letter E mean? Do I need to configure something out of the debugger? Interestingly I left the command argument blank and the output changed to "usage: showip hostname" Any help would be appreciated. #ifdef _WIN32 #endif #include <sys/types.h> #include <winsock2.h> #include <ws2tcpip.h> #include <iostream> using namespace std; #include <stdio.h> #include <string.h> #include <sys/types.h> #include <winsock.h> #pragma comment(lib, "ws2_32.lib") int main(int argc, char *argv[]) { struct addrinfo hints, *res, *p; int status; char ipstr[INET6_ADDRSTRLEN]; if (argc != 2) { fprintf(stderr,"usage: showip hostname\n"); system("PAUSE"); return 1; } memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // AF_INET or AF_INET6 to force version hints.ai_socktype = SOCK_STREAM; if ((status = getaddrinfo(argv[1], NULL, &hints, &res)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(status)); system("PAUSE"); return 2; } printf("IP addresses for %s:\n\n", argv[1]); for(p = res;p != NULL; p = p->ai_next) { void *addr; char *ipver; // get the pointer to the address itself, // different fields in IPv4 and IPv6: if (p->ai_family == AF_INET) { // IPv4 struct sockaddr_in *ipv4 = (struct sockaddr_in *)p->ai_addr; addr = &(ipv4->sin_addr); ipver = "IPv4"; } else { // IPv6 struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)p->ai_addr; addr = &(ipv6->sin6_addr); ipver = "IPv6"; } // convert the IP to a string and print it: inet_ntop(p->ai_family, addr, ipstr, sizeof ipstr); printf(" %s: %s\n", ipver, ipstr); } freeaddrinfo(res); // free the linked list system("PAUSE"); return 0; }

    Read the article

  • Productive Toolset for C# Developer

    - by Marko Apfel
    Programming Visual Studio ReSharper Agent Johnson Agent Smith StyleCop for ReSharper Keymaps SettingsManager Git Source Control Provider Gist NuGet Package Manager NDepend Productivity Power Tools PowerCommands for Visual Studio PostSharp Indent Guides Typemock Isolator VSCommands Ressource Refactor Clone Detective GhostDoc CR_Documentor AnkSVN Expression Blend SharpDevelop Notepad++, PS Pad StyleCop, FxCop, .. .NET Reflector, ILSpy, dotPeek, Just Decompile Git Extensions inkl. MSysGit, MinGW Github for Windows SmartGit PoSH-Git Console Enhancement Project LINQPad Mercurial RapidSVN SQL Management Studio Adventure Works Sample DB AdventureWorksLT Toad for SQL Server yEd Graph Editor TeX, LateX MiKTeX, TeXworks Pandoc Jenkins, TeamCity KompoZer XML Notepad Kaxaml KDiff3, WinMerge, Perforce Merge Handle DbgView FusLogVw FTP Commander HTML Help Workshop, Sandcastle, SHFB WiX Enterprise Architect InsightProfiler Putty Cygwin DXCore, DXCore Plugins FreeMind ProcessExplorer, ProcessMonitor Social Networking, Community Windows Live Writer Disgsby Skype TweetDeck FeedReader Sytem and others Microsoft Office (notably OneNote!!!) Adobe Reader PDF Creator SRWare Iron (Chrome) AddThis bit-ly del.icio.us InstaPaper Leo Dictionary Google Bookmarks Proxy Switchy! StumbleUpon K-Meleon FreeCommander, FAR 7-Zip Keyboard Jedi Launchy TrueCrypt Dropbox Ditto Greenshot Rainlendar2 Everything Daemon Tools inSSIDer VirtualBox Stardock Fences Media Player Classic VLC Media Player Winamp WinAmp Cue Player LAME Encoder CamStudio Youtube to MP3 Converter VirtualDub Image Resizer Powertoy Clone 2.0 Paint.NET Picasa Windy JediConcentrate, Ghoster TeamViewer Timerle TreeSizeFree WinDirStat Windows Sizer, WinResizer ZoomIt Sometimes nice to have ArcGIS TortoiseSVN, TortoiseCVS XnView GitJungle CowSpy Grindstone Free Download Manager CDBurnerXP Free Audio CD Burner SmartAssembly intellibook GMX SMS Manager BlackBerry Desktop Cisco Any Connect eRoom Foxit Reader Google Earth ThinkVantage GPS Gridy Bluefish The GodFather Tor Browser, Charon YouTube Downloader NCover Network Stumbler Remote Debugger WScite XML Pad DBVisualizer Microsoft Network Monitor, Fiddler2 Eclipse IDE Oracle Client, Oracle SQL Developer Bookmarks, Links http://pastebin.de/, http://pastebin.com/ http://followup.cc  http://trello.com http://tumblr.com https://bitly.com/, http://is.gd http://www.famkruithof.net/uuid/uuidgen, http://www.guidgenerator.com/ https://github.com/, https://bitbucket.org/ http://dict.leo.org/, http://translate.google.com/ http://prezi.com/ http://geekswithblogs.net/Default.aspx, http://codebetter.com/ http://duckduckgo.com/bang.html   http://de.schreibtrainer.com/index.php?site=3&menuId=3 http://www.mr-wetter.de/ this is an update to http://geekswithblogs.net/mapfel/archive/2010/07/12/140877.aspx

    Read the article

  • Resolving the Access is Denied Error in VSeWSS Deployments

    - by Damon
    Visual Studio Extensions for Windows SharePoint Services 1.3 (VSeWSS 1.3) tends to make my life easier unless I'm typing out the words that make up the VSeWSS acronym - really, what a mouthful.  But one of the problems that I routinely encounter are error messages when trying to deploy solutions.  These normally look something like the following: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) I tried a variety of steps to resolve this issue: Recycling the application pool Restarting IIS Closing Visual Studio Not detaching from the debugger until a request was fully completed Logging off and logging back into Windows etc. Nothing actually worked.  Some of these resolution attempts seemed to help keep the problem from happening quite as frequently, but I still have no idea what EXACTLY causes the problem and it would rear its ugly head from time to time.  Unfortunately, the only resolution I found that seemed to work was to reboot the machine . which is a crappy resolution. Finally sick enough of the problem to spend some time on it, I went on a search and tried to figure out if anyone else was having this issue.  People seem to suggest that turning off the Indexing Service on your machine helps resolve this problem.  I tried turning it off but I kept having issues.  Which was depressing.  Fortunately, I stumbled upon the resolution when I was looking through the services list.  If you encounter the issue, all you have to do is reset the World Wide Web Publishing Service.  I've had a 100% success rate so far with this approach.  I'm not sure if having the Indexing Service is part of the solution, but I've kept it disabled for the time being because I'm really sick of having to reboot my machine to deal with that error message. If you do VSeWSS development, you may also want to check out this blog post: VSeWSS 1.3 - Getting around the "Unable to load one or more of the requested types" Error

    Read the article

  • Best of "The Moth" 2011

    - by Daniel Moth
    Once again (like in 2004, 2005, 2006, 2007, 2008, 2009, 2010) the time has come to wish you a Happy New Year and to share my favorite posts from the year we just left behind. 1. My first blog entry in January and last one in December were both about my Windows Phone app: Translator by Moth and Translator by Moth v2. In between, I shared a few code snippets for Windows Phone development including a watermark textbox, a scroll helper, an RTL helper and a network connectivity helper - there will be more coming in 2012. 2. Efficiently using Microsoft Office products is the hallmark of an efficient Program Manager (and not only), and I'll continue sharing tips on this blog in that area. An example from last year is tracking changes in SharePoint-hosted Word document. 3. Half-way through last year I moved from managing the parallel debugger team to managing the C++ AMP team (both of them in Visual Studio 11). That means I had to deprioritize sharing content on VS parallel debugging features (I promise to do that in 2012), and it also meant that I wrote a lot about C++ AMP. You'll need a few cups of coffee to go through all of it, and most of the links were aggregated on this single highly recommended post: Give a session on C++ AMP – here is how You can stay tuned for more by subscribing via one of the options on the left… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • OpenGL 2 on Android: native window

    - by ThreaderSlash
    According to OGLES specification, we have the following definition: EGLSurface eglCreateWindowSurface(EGLDisplay display, EGLConfig config, NativeWindowType native_window, EGLint const * attrib_list) More details, here: http://www.khronos.org/opengles/documentation/opengles1_0/html/eglCreateWindowSurface.html And also by definition: int32_t ANativeWindow_setBuffersGeometry(ANativeWindow* window, int32_t width, int32_t height, int32_t format); More details, here: http://mobilepearls.com/labs/native-android-api I am running Android Native App on OGLES 2 and debugging it in a Samsung Nexus device. For setting up the 3D scene graph environment, the following variables are defined: struct android_app { ... ANativeWindow* window; }; android_app* mApplication; ... mApplication=&pApplication; And to initialize the App, we run the commands in the code: ANativeWindow_setBuffersGeometry(mApplication->window, 0, 0, lFormat); mSurface = eglCreateWindowSurface(mDisplay, lConfig, mApplication->window, NULL); Funny to say is that, the command ANativeWindow_setBuffersGeometry behaves as expected and works fine according to its definition, accepting all the parameters sent to it. But the eglCreateWindowSurface does no accept the parameter mApplication-window, as it should accept according to its definition. Instead, it looks for the following input: EGLNativeWindowType hWnd; mSurface = eglCreateWindowSurface(mDisplay,lConfig,hWnd,NULL); As an alternative, I considered to use instead: NativeWindowType hWnd=android_createDisplaySurface(); But debugger says: Function 'android_createDisplaySurface' could not be resolved Can someone tell if there is a way to convert mApplication-window? In a way that the data from the android_app get accepted to the window surface?

    Read the article

  • Windows Phone 7 developer resources

    - by Daniel Moth
    Developers of Windows Mobile 6.x (and indeed Windows CE) applications still use the rich .NET Compact Framework 3.5 with Visual Studio 2008 for development. That is still a great platform and the Mobile Development Handbook is still a useful resource (if I may say so myself :-). The release of Windows Phone 7, changes the programming paradigm. The programming model has NETCF in its guts, but the developer uses the Silverlight or XNA APIs (and they can call from one into the other). I thought I'd gather here (for your reference and mine) the top 10 resources for getting started. Windows Phone Developer Home - get the official word and latest announcements. Windows Phone Developer Tools RTW - download the free developer tools (on my machine the installation took 30 minutes, over my existing vanilla Visual Studio 2010 install). Windows Phone 7 Jump Start video training - watch the 12 sessions by Wigley/Miles. Windows Phone 7 Developer Training Kit - work through the labs. Windows Phone RSS tag - channel9 has tons more WP7 videos, stay tuned. Windows Phone 7 in 7 Minutes - watch 20 7-minute videos. Programming Windows Phone 7 - read 11 free chapters from Petzold's eBook. The Windows Phone Developer Blog - subscribe to the official blog. Getting Started with Windows Phone Development - explore all links from the MSDN Library root page.            Silverlight for Windows Phone – another root MSDN library page. If after all that you get your hands dirty and still can't find the answer ask questions at the WP7 development MSDN Forum.   On a personal note, I was pleased to see that the Parallel Stacks debugger window works fine with the WP7 project ;-) Comments about this post welcome at the original blog.

    Read the article

  • Issuing Current Time Increments in StreamInsight (A Practical Example)

    The issuing of a Current Time Increment, Cti, in StreamInsight is very definitely one of the most important concepts to learn if you want your Streams to be responsive. A full discussion of how to issue Ctis is beyond the scope of this article but a very good explanation in addition to Books Online can be found in these three articles by a member of the StreamInsight team at Microsoft, Ciprian Gerea. Time in StreamInsight Series http://blogs.msdn.com/b/streaminsight/archive/2010/07/23/time-in-streaminsight-i.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/07/30/time-in-streaminsight-ii.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/08/03/time-in-streaminsight-iii.aspx A lot of the problems I see with unresponsive or stuck streams on the MSDN Forums are to do with how Ctis are enqueued or in a lot of cases not enqueued. If you enqueue events and never enqueue a Cti then StreamInsight will be perfectly happy. You, on the other hand, will never see data on the output as you have not told StreamInsight to flush the stream. This article deals with a specific implementation problem I had recently whilst working on a StreamInsight project. I look at some possible options and discuss why they would not work before showing the way I solved the problem. The stream of data I was dealing with on this project was very bursty that is to say when events were flowing they came through very quickly and in large numbers (1000 events/sec), but when the stream calmed down it could be a few seconds between each event. When enqueuing events into the StreamInsight engne it is best practice to do so with a StartTime that is given to you by the system producing the event . StreamInsight processes events and it doesn't matter whether those events are being pushed into the engine by a source system or the events are being read from something like a flat file in a directory somewhere. You can apply the same logic and temporal algebra to both situations. Reading from a file is an excellent example of where the time of the event on the source itself is very important. We could be reading that file a long time after it was written. Being able to read the StartTime from the events allows us to define windows that will hold the correct sets of events. I was able to do this with my stream but this is where my problems started. Below is a very simple script to create a SQL Server table and populate it with sample data that will show exactly the problem I had. CREATE TABLE [dbo].[t] ( [c1] [int] PRIMARY KEY, [c2] [datetime] NULL ) INSERT t VALUES (1,'20100810'),(2,'20100810'),(3,'20100810') Column c2 defines the StartTime of the event on the source and as you can see the values in all 3 rows of data is the same. If we read Ciprian’s articles we know that we can define how Ctis get injected into the stream in 3 different places The Stream Definition The Input Factory The Input Adapter I personally have always been a fan of enqueing Ctis through the factory. Below is code typical of what I would use to do this On the class itself I do some inheriting public class SimpleInputFactory : ITypedInputAdapterFactory<SimpleInputConfig>, ITypedDeclareAdvanceTimeProperties<SimpleInputConfig> And then I implement the following function public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)), AdvanceTimePolicy.Adjust); } The configInfo .CtiFrequency property is a value I pass through to define after how many events I want a Cti to be injected and this in turn will flush through the stream of data. I usually pass a value of 1 for this setting. The second parameter determines the CTI timestamp in terms of a delay relative to the events. -1 ticks in the past results in 1 tick in the future, i.e., ahead of the event. The problem with this method though is that if consecutive events have the same StartTime then only one of those events will be enqueued. In this example I use the following to define how I assign the StartTime of my events currEvent.StartTime = (DateTimeOffset)dt.c2; If I go ahead and run my StreamInsight process with this configuration i can see on the output adapter that two events have been removed To see this in a little more depth I can use the StreamInsight Debugger and see what happens internally. What is happening here is that the first event arrives and a Cti is injected with a time of 1 tick after the StartTime of that event (Also the EndTime of the event). The second event arrives and it has a StartTime of before the Cti and even though we specified AdvanceTimePolicy.Adjust on the factory we know that a point event can never be adjusted like this and the event is dropped. The same happens for the third event as well (The second and third events get trumped by the Cti). For a more detailed discussion of why this happens look here http://www.sqlis.com/sqlis/post/AdvanceTimePolicy-and-Point-Event-Streams-In-StreamInsight.aspx We end up with a single event being pushed into the output adapter and our result now makes sense. The next way I tried to solve this problem by changing the value of the second parameter to TimeSpan.Zero Here is how my factory code now looks public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.Zero), AdvanceTimePolicy.Adjust); } What I am doing here is declaring a policy that says inject a Cti together with every event and stamp it with a StartTime that is equal to the start time of the event itself (TimeSpan.Zero). This method has plus points as well as a downside. The upside is that no events will be lost by having the same StartTime as previous events. The Downside is that because the Cti is declared with the StartTime of the event itself then it does not actually flush that particular event because in the StreamInsight algebra, a Cti commits only those events that occurred strictly before them. To flush the events we need a Cti to be enqueued with a greater StartTime than the events themselves. Here is what happened when I ran this configuration As you can see all we got through was the Cti and none of the events. The debugger output shows the stamps on the Cti and the events themselves. Because the Cti issued has the same timestamp (StartTime) as the events then none of the events get flushed. I was nearly there but not quite. Because my stream was bursty it was possible that the next event would not come along for a few seconds and this was far too long for an event to be enqueued and not be flushed to the output adapter. I needed another solution. Two possible solutions crossed my mind although only one of them made sense when I explored it some more. Where multiple events have the same StartTime I could add 1 tick to the first event, two to the second, three to third etc thereby giving them unique StartTime values. Add a timer to manually inject Ctis The problem with the first implementation is that I would be giving the events a new StartTime. This would cause me the following problems If I want to define windows over the stream then some events may not be captured in the right windows and therefore any calculations on those windows I did would be wrong What would happen if we had 10,000 events with the same StartTime? I would enqueue them with StartTime + n ticks. Along comes a genuine event with a StartTime of the very first event + 1 tick. It is now too far in the past as far as my stream is concerned and it would be dropped. Not what I would want to do at all. I decided then to look at the Timer based solution I created a timer on my input adapter that elapsed every 200ms. private Timer tmr; public SimpleInputAdapter(SimpleInputConfig configInfo) { ctx = new SimpleTimeExtractDataContext(configInfo.ConnectionString); this.configInfo = configInfo; tmr = new Timer(200); tmr.Elapsed += new ElapsedEventHandler(t_Elapsed); tmr.Enabled = true; } void t_Elapsed(object sender, ElapsedEventArgs e) { ts = DateTime.Now - dtCtiIssued; if (ts.TotalMilliseconds >= 200 && TimerIssuedCti == false) { EnqueueCtiEvent(System.DateTime.Now.AddTicks(-100)); TimerIssuedCti = true; } }   In the t_Elapsed event handler I find out the difference in time between now and when the last event was processed (dtCtiIssued). I then check to see if that is greater than or equal to 200ms and if the last issuing of a Cti was done by the timer or by a genuine event (TimerIssuedCti). If I didn’t do this check then I would enqueue a Cti every time the timer elapsed which is not something I wanted. If the difference between the two times is greater than or equal to 500ms and the last event enqueued was by a real event then I issue a Cti through the timer to flush the event Queue, otherwise I do nothing. When I enqueue the Ctis into my stream in my ProduceEvents method I also set the values of dtCtiIssued and TimerIssuedCti   currEvent = CreateInsertEvent(); currEvent.StartTime = (DateTimeOffset)dt.c2; TimerIssuedCti = false; dtCtiIssued = currEvent.StartTime; If I go ahead and run this configuration I see the following in my output. As we can see the first Cti gets enqueued as before but then another is enqueued by the timer and because this has a later timestamp it flushes the enqueued events through the engine. Conclusion Hopefully this has shown how the enqueuing of Ctis can have a dramatic effect on the responsiveness of your output in StreamInsight. Understanding the temporal nature of the product is for me one of the most important things you can learn. I have attached my solution for the demos. It is all in one project and testing each variation is a simple matter of commenting and un-commenting the parts in the code we have been dealing with here.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #033

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Spatial Database Definition and Research Documents Here is the definition from Wikipedia about spatial database : A spatial database is a database that is optimized to store and query data related to objects in space, including points, lines and polygons. While typical databases can understand various numeric and character types of data, additional functionality needs to be added for databases to process spatial data types. Select Only Date Part From DateTime – Best Practice A very common question which I receive is how to only get Date or Time part from datetime value. In this blog post I explain the same in very simple words. T-SQL Paging Query Technique Comparison (OVER and ROW_NUMBER()) – CTE vs. Derived Table I have received few emails and comments about my post SQL SERVER – T-SQL Paging Query Technique Comparison – SQL 2000 vs SQL 2005. The main question was is this can be done using CTE? Absolutely! What about Performance? It is identical! Please refer above mentioned article for the history of paging. SQL SERVER – Cannot resolve collation conflict for equal to operation One of the very first error I ever encountered in my career was to resolve this conflict. I have blogged about it and I have realized that many others like me who are facing this error. LEN and DATALENGTH of NULL Simple Example Here is the question for you what is the LEN of NULL value? Well it is very easy – just read the blog. Recovery Models and Selection Very simple and easy explanation of the Database Backup Recovery Model and how to select the best option for you. Explanation SQL SERVER Hash Join Hash join gives best performance when two more join tables are joined and at-least one of them have no index or is not sorted. It is also expected that smaller of the either of table can be read in memory completely (though not necessary). Easy Sequence of SELECT FROM JOIN WHERE GROUP BY HAVING ORDER BY SELECT yourcolumns FROM tablenames JOIN tablenames WHERE condition GROUP BY yourcolumns HAVING aggregatecolumn condition ORDER BY yourcolumns NorthWind Database or AdventureWorks Database – Samples Databases In this blog post we learn how to install Northwind database. I also shared the source where one can download this database as that is used in many examples on MSDN help files. sp_HelpText for sp_HelpText – Puzzle A simple quick puzzle – do you know the answer of it? If not, go ahead and read the blog. 2008 SQL SERVER – 2008 – Step By Step Installation Guide With Images When SQL Server 2008 was newly introduced lots of people had no clue how to install SQL Server 2008 and the amount of the question which I used to receive were so much. I wrote this blog post with the spirit that this will help all the newbies to install SQL Server 2008 with the help of images. Still today this blog post has been bible for all of the people who are confused with SQL Server installation. Inline Variable Assignment I loved this feature. I have always wanted this feature to be present in SQL Server. The last time when I met developers from Microsoft SQL Server, I had talked about this feature. I think this feature saves some time but make the code more readable. Introduction to Policy Management – Enforcing Rules on SQL Server If our company policy is to create all the Stored Procedure with prefix ‘usp’ that developers should be just prevented to create Stored Procedure with any other prefix. Let us see a small tutorial how to create conditions and policy which will prevent any future SP to be created with any other prefix. 2009 Performance Counters from System Views – By Kevin Mckenna Many of you are not aware of this fact that access to performance information is readily available in SQL Server and that too without querying performance counters using a custom application or via perfmon. Till now, this fact has remained undisclosed but through this post I would like to explain you can easily access SQL Server performance counter information. Without putting much effort you will come across the system viewsys.dm_os_performance_counters. As the name suggests, this provides you easy access to the SQL Server performance counter information that is passed on to perfmon, but you can get at it via tsql. Customize Toolbar – Remove Debug Button from Toolbar I was fond of SQL Server Debugger feature in SQL Server 2000. To my utter disappointment, this feature was withdrawn from SQL Server 2005. The button of the debugger is similar to a play button and is used to run debugging commands of Visual Studio. Because of this reason, it gets very much infuriating for developers when they are developing on both – Visual Studio and SSMS. Let us now see how we can remove debugging button from SQL Server Management Studio. Effect of Normalization on Index and Performance A very interesting conversation which started from twitter. If you want to read one link this is the link I encourage you to read it. SSMS Feature – Multi-server Queries Using SQL Server Management Studio (SSMS) DBAs can now query multiple servers from one window. It is quite common for DBAs with large amount of servers to maintain and gather information from multiple SQL Servers and create report. This feature is a blessing for the DBAs, as they can now assemble all the information instantaneously without going anywhere. Query Optimizer Hint ROBUST PLAN – Question to You “ROBUST PLAN” is a kind of query hint which works quite differently than other hints. It does not improve join or force any indexes to use; it just makes sure that a query does not crash due to over the limit size of row. Let me elaborate upon it in the blog post. 2010 Do you really know the difference between various date functions available in SQL Server 2012? Here is a three part story where we explored the same with examples: Fastest Way to Restore the Database Difference Between DATETIME and DATETIME2 Difference Between DATETIME and DATETIME2 – WITH GETDATE Shrinking NDF and MDF Files – Readers’ Opinion Shrinking Database always creates performance degradation and increases fragmentation in the database. I suggest that you keep that in mind before you start reading the following comment. If you are going to say Shrinking Database is bad and evil, here I am saying it first and loud. Now, the comment of Imran is written while keeping in mind only the process showing how the Shrinking Database Operation works. Imran has already explained his understanding and requests further explanation. I have removed the Best Practices section from Imran’s comments, as there are a few corrections. 2011 Solution – Puzzle – SELECT * vs SELECT COUNT(*) This is very interesting question and I am very confident that not every one knows the answer to this question. Let me ask you again – Which will be faster SELECT* or SELECT COUNT (*) or do you think this is apples and oranges comparison. 2012 Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Let us understand the entire discussion with the help of three different examples. Finding Size of a Columnstore Index Using DMVs One of the very common question I often see is need of the list of columnstore index along with their size and corresponding table name. I quickly re-wrote a script using DMVs sys.indexes and sys.dm_db_partition_stats. This script gives the size of the columnstore index on disk only. I am sure there will be advanced script to retrieve details related to components associated with the columnstore index. However, I believe following script is sufficient to start getting an idea of columnstore index size. Developer Training Resources and Summary Roundup Developer Training - Importance and Significance - Part 1 In this part we discussed the importance of training in the real world. The most important and valuable resource any company is its employee. Employees who have been well-trained will be better at their jobs and produce a better product.  An employee who is well trained obviously knows more about their job and all the technical aspects. I have a very high opinion about training employees and it is the most important task. Developer Training – Employee Morals and Ethics – Part 2 In this part we discussed the most crucial components of training. Often employees are expecting the company to pay for their training and the company expresses no interest in training the employee. Quite often training expenses are the real issue for both the employee and employer. Developer Training – Difficult Questions and Alternative Perspective - Part 3 This part was the most difficult to write as I tried to address a few difficult questions and answers. Training is such a sensitive issue that many developers when not receiving chance for training think about leaving the organization. Developer Training – Various Options for Developer Training – Part 4 In this part I tried to explore a few methods and options for training. The generic feedback I received on this blog post was short and I should have explored each of the subject of the training in details. I believe there are two big buckets of training 1) Instructor Lead Training and 2) Self Lead Training. Developer Training – A Conclusive Summary- Part 5 There is no better motivation than a personal desire to learn new technology. Honestly there is nothing more personal learning. That “change is the only constant” and “adapt & overcome” are the essential lessons of life. One cannot stop the learning and resist the change. In the IT industry “ego of knowing all” and the “resistance to change” are the most challenging issues. A Quick Look at Logging and Ideas around Logging Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Beginning Performance Tuning with SQL Server Execution Plan Solution of Puzzle – Swap Value of Column Without Case Statement Earlier this week I asked a question where I asked how to Swap Values of the column without using CASE Statement. Read here: SQL SERVER – A Puzzle – Swap Value of Column Without Case Statement. I have proposed 3 different solutions in the blog posts itself. I had requested the help of the community to come up with alternate solutions and honestly I am stunned and amazed by the qualified entries. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Parallel Debugging

    Using Visual Studio 2010 parallel debugging is easy. Two new debugging windows provide a total view of the internals of your PPL and TPL applications with hints on where to start investigations. These are not mere extensions to VS, but tightly integrated with the rest of the debugger experience, so you don't need to learn many new techniques. Use them in your program to eclipse bugs from existence!One of the most FAQ I receive is links to VS2010 parallel debugging content and rather than keep sending many, I decided to gather them all under one permalink, hence this multi link blog post.- MSDN Magazine article on Parallel Debugging.- Screencast of sample code from the article.- MSDN Walkthrough: Debugging a Parallel Application (VB, C++, C#).- Screencast of walkthrough for Parallel Stacks.- Screencast of walkthrough for Parallel Tasks.- MSDN "How To" on Parallel Tasks.- MSDN "How To" on Parallel Stacks.- Detailed blog post on Parallel Tasks.- Detailed blog post on Parallel Stacks.- Detailed blog post on Parallel Stacks - Tasks View.- Detailed blog post on Parallel Stacks - Method View.- Download slides on Parallel Tasks and Parallel Stacks (pptx).If you have questions on these, please post to any of the parallel computing forums or the debugging forum (your question will be routed to me if nobody else can answer it). Comments about this post welcome at the original blog.

    Read the article

  • Ubuntu 14.04: After login, top- and sidepanel don't load and system settings don't open

    - by Löwe Simon
    I have Ubuntu 14.04 on a Medion Erazer with the Nvidia GTX570M card. At first, while I had not installed the last nvidia driver, each time I would try to suspend my pc it would freeze frame on the login. Once I managed to install the nvidia drivers, everything seemed to work up until I noticed that suddenly the system settings would not open anymore. I then rebooted my pc, but when I logged in I just end up with my cursor but no top panel or side pannel. Thankfully, I had installed the gnome desktops which works, except for the fact the system settings do not open also in the gnome desktop. I have tried following: Problems after upgrading to 14.04 (only background and pointer after login) except for reinstalling nvidia, since then I would be back at square one with suspend not working. When I try to launch system settings through the terminal, I get: simon@simon-X681X:~$ unity-control-center libGL error: No matching fbConfigs or visuals found libGL error: failed to load driver: swrast (unity-control-center:2806): Gdk-ERROR **: The program 'unity-control-center' received an X Window System error. This probably reflects a bug in the program. The error was 'BadLength (poly request too large or internal Xlib length erro'. (Details: serial 229 error_code 16 request_code 155 (GLX) minor_code 1) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) Trace/breakpoint trap (core dumped) I know the 2 problems seem unrelated, but since they occured together, I am wondering if that is really the case. Your help is much appreciated, Simon

    Read the article

  • Couldn't make Angry birds to work on wine

    - by Ashfame
    I could run Notepad++ easily but I fail to run the Angry bird exe. Whenever I open the exe, I see one of my screen flickrs a bit (as lines and not the whole screen) and nothing happens. Any ideas? Edit: Output of wine angrybirds.exe fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.VC80.CRT" (8.0.50727.4053) fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.VC90.CRT" (9.0.21022.8) err:module:import_dll Library MSVCP90.dll (which is needed by L"C:\\windows\\system32\\AppUpWrapper.dll") not found err:module:import_dll Library AppUpWrapper.dll (which is needed by L"C:\\windows\\system32\\angrybirds.exe") not found err:module:LdrInitializeThunk Main exe initialization for L"C:\\windows\\system32\\angrybirds.exe" failed, status c0000135 I think it didn't even install. I manually dropped those files in the folder but still no gain. Edit: Progress I dropped the file MSVCP90.dll manually and now this is what I get in the output fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.VC80.CRT" (8.0.50727.4053) fixme:actctx:parse_depend_manifests Could not find dependent assembly L"Microsoft.VC90.CRT" (9.0.21022.8) fixme:heap:HeapSetInformation 0x541000 0 0x32fd48 4 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 EXCEPTION: Failed to open data/scripts/starLimits.lua wine: Unhandled exception 0x40000015 at address 0x7b880023:0x78b271d0 (thread 0009), starting debugger... fixme:msvcr90:__clean_type_info_names_internal (0x10267694) stub fixme:msvcr90:__clean_type_info_names_internal (0x78506644) stub ashfame@ashfame-desktop:~$ Process of pid=0008 has terminated No process loaded, cannot execute 'echo Modules:' Cannot get info on module while no process is loaded No process loaded, cannot execute 'echo Threads:' process tid prio (all id:s are in hex) 0000000e services.exe 00000014 0 00000010 0 0000000f 0 00000011 winedevice.exe 00000018 0 00000016 0 00000013 0 00000012 0 00000019 explorer.exe 0000001a 0 You must be attached to a process to run this command. No process loaded, cannot execute 'detach' and there the terminal hangs (I mean I would have to Ctrl + C to get out). It shows up the famous message, that it needs to close down. Edit: Just to let you know that I am still stuck at it. I don't use wine for anything else, so I am ready to do a clean install of wine and everything if anyone is willing to provide me instructions.

    Read the article

  • Parallel Computing Platform Developer Lab

    - by Daniel Moth
    This is an exciting announcement that I must share: "Microsoft Developer & Platform Evangelism, in collaboration with the Microsoft Parallel Computing Platform product team, is hosting a developer lab at the Platform Adoption Center on April 12-15, 2010.  This event is for Microsoft Partners and Customers seeking to incorporate either .NET Framework 4 or Visual C++ 2010 parallelism features into their new or existing applications, and to gain expertise with new Visual Studio 2010 tools including the Parallel Tasks and Parallel Stacks debugger toolwindows, and the Concurrency Visualizer in the profiler. Opportunities for attendees include: Gain expert design assistance with your Parallel Computing Platform based solution. Develop a solution prototype in collaboration with Microsoft Software Engineers. Attend topical presentations and “chalk-talk” sessions. Your team will be assigned private, secure offices for confidential collaboration activities. The event has limited capacity, thus enrollment is based on an application process.   Please download and complete the application form then return it to the event management team per instructions included within the form.  Applications will be evaluated based upon the technical solution scenario along with indicated project readiness timelines.  Microsoft event management team members may contact you directly for additional clarification and discussion of your project scenario during the nomination process." Comments about this post welcome at the original blog.

    Read the article

  • Debugging .NET 2.0 assembly from unmanaged code in VS2010?

    - by Rick Strahl
    I’ve run into a serious snag trying to debug a .NET 2.0 assembly that is called from unmanaged code in Visual Studio 2010. I maintain a host of components that using COM interop and custom .NET runtime hosting and ever since installing Visual Studio 2010 I’ve been utterly blocked by VS 2010’s inability to apparently debug .NET 2.0 assemblies when launching through unmanaged code. Here’s what I’m actually doing (simplified scenario to demonstrate): I have a .NET 2.0 assembly that is compiled for COM Interop Compile project with .NET 2.0 target and register for COM Interop Set a breakpoint in the .NET component in one of the class methods Instantiate the .NET component via COM interop and call method The result is that the COM call works fine but the debugger never triggers on the breakpoint. If I now take that same assembly and target it at .NET 4.0 without any other changes everything works as expected – the breakpoint set in the assembly project triggers just fine. The easy answer to this problem seems to be “Just switch to .NET 4.0” but unfortunately the application and the way the runtime is actually hosted has a few complications. Specifically the runtime hosting uses .NET 2.0 hosting and apparently the only reliable way to host the .NET 4.0 runtime is to use the new hosting APIs that are provided only with .NET 4.0 (which all by itself is lame, lame, lame as once again the promise of backwards compatibility is broken once again by .NET). So for the moment I need to continue using the .NET 2.0 hosting APIs due to application requirements. I’ve been searching high and low and experimenting back and forth, posted a few questions on the MSDN forums but haven’t gotten any hints on what might be causing the apparent failure of Visual Studio 2010 to debug my .NET 2.0 assembly properly when called from un-managed code. Incidentally debugging .NET 2.0 targeted assemblies works fine when running with a managed startup application – it seems the issue is specific to the unmanaged code starting up. My particular issue is with custom runtime hosting which at first I thought was the problem. But the same issue manifests when using COM Interop against a .NET 2.0 assembly, so the hosting is probably not the issue. Curious if anybody has any ideas on what could be causing the lack of debugging in this scenario?© Rick Strahl, West Wind Technologies, 2005-2010

    Read the article

  • CodePlex Daily Summary for Tuesday, June 05, 2012

    CodePlex Daily Summary for Tuesday, June 05, 2012Popular ReleasesApplication Architecture Guidelines: Application Architecture Guidelines 3.0.7: 3.0.7Jolt Environment: Jolt v2 Stable: Many new features. Follow development here for more information: http://www.rune-server.org/runescape-development/rs-503-client-server/projects/298763-jolt-environment-v2.html Setup instructions in downloadtedplay: tedplay 1.0: First public release of the Commodore 264 family (C16, plus/4) music player based on the SDL version of YAPE http://yape.homeserver.hu.SharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.5): New fetures:Multilingual Support Max users property in Standings Web Part Games time zone change (UTC +1) bug fix - Version 1.4 locking problem http://euro2012.codeplex.com/discussions/358262 bug fix - Field Title not found (v.1.3) German SP http://euro2012.codeplex.com/discussions/358189#post844228 Bug fix - Access is denied.for users with contribute rights Bug fix - Installing on non-English version of SharePoint Bug fix - Title Rules Installing SharePoint Euro 2012 PredictorSharePoint E...xNet: xNet 2.1.1: Release xNet 2.1.1Command Line Parser Library: 1.9.2.4 stable: This is the first stable of 1.9.* branch. Added tests for HelpText::AutoBuild. Fixed minor formatting error in HelpText::DefaultParsingErrorsHandler.myManga: myManga v1.0.0.4: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.4.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMVVM Light Toolkit: V4RC (binaries only) including Windows 8 RP: This package contains all the latest DLLs for MVVM Light V4 RC. It includes the DLLs for Windows 8 Release Preview. An updated Nuget package is also available at http://nuget.org/packages/MvvmLightLibsPreviewExtAspNet: ExtAspNet v3.1.7: +2012-06-03 v3.1.7 -?????????BUG,??????RadioButtonList?,AJAX????????BUG(swtseaman、????)。 +?Grid?BoundField、HyperLinkField、LinkButtonField、WindowField??HtmlEncode?HtmlEncodeFormatString(TiDi)。 -HtmlEncode?HtmlEncodeFormatString??????true,??????HTML????????。 -??????Asp.Net??GridView?BoundField?????????。 -http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.boundfield.htmlencode -?Grid?HyperLinkField、WindowField??UrlEncode??,????URL??(???true)。 -?????????????,?????????????...Ela, functional language: Ela Platform 2012.3: 2012.3 is a stabilization release. It contains several improvements to Ela, std lib and Elide. Ela changes Fix:Op code 'Show' didn't work correctly when a format string was a thunk. Fix:Flipping a function wrapped in a thunk caused VM to crush. Fix:A bug fixed in concatenation of a thunk and a lazy list. Fix:Concatenation of a lazy list and a strict list could cause stack overflow in a case of recursive thunks. Fix:A bug fixed in applying 'show' to a result of a lazy and strict list...Cross Site Treeview - For MOSS 2007: Cross Site Treeview-Beta - WSP Solution: Cross Site Treeview-Beta - WSP SolutionLiveChat Starter Kit: LCSK v1.5.2: New features: Visitor location (City - Country) from geo-location Pass configuration via javascript for the chat box New visitor identification (no more using the IP address as visitor identification) To update from 1.5.1 Run the /src/1.5.2-sql-updates.txt SQL script to update your database tables. If you have it installed via NuGet, simply update your package and the file will be included so you can run the update script. New installation The easiest way to add LCSK to your app is by...Kendo UI ASP.NET Sample Applications: Sample Applications (2012-06-01): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.Better Explorer: Better Explorer Beta 1: Finally, the first Beta is here! There were a lot of changes, including: Translations into 10 different languages (the translations are not complete and will be updated soon) Conditional Select new tools for managing archives Folder Tools tab new search bar and Search Tab new image editing tools update function many bug fixes, stability fixes, and memory leak fixes other new features as well! Please check it out and if there are any problems, let us know. :) Also, do not forge...Player Framework by Microsoft: Player Framework for Windows 8 Metro (Preview 3): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8 Microsoft PlayReady Client SDK for Metro Style Apps Release notes:Support for Windows 8 Release Preview (released 5/31/12) Advertising support (VAST, MAST, VPAID, & clips) Miscellaneous improvements and bug fixesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.54: Fix for issue #18161: pretty-printing CSS @media rule throws an exception due to mismatched Indent/Unindent pair.Silverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.Windows 8 Metro RSS Reader: RSS Reader release 6: Changed background and foreground colors Used VariableSizeGrid layout to wrap blog posts with images Sort items with Images first, text-only last Enabled Caching to improve navigation between framesJson.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...New ProjectsDish: ????? ???????? ??? ??.DRESSCOLLECTION: THIS IS A MVC APPLICAITON WHICH HELPS IN CREATING RANGE OF CLOTH AND DRESS COLLECTION TO CHOOSE AND BUY.FlowTasks: FlowTasks is a framework to develop human and business workflowGroup3.ERP.Roleadministration: Software zum generieren von RollendefinitionenHierarchical Pages Orchard Module: Creates a Hierarchical Page content type that does everything the built-in Page type does, but items can also contain other pages (and thus are containable by other pages too).hot24.vn: is first my project, it very cu chuoi.Household Manager: fcsdvsdvsdcdLabView interface for windows HPC: This project is a prototype library that attempts to integrate in the same enviroment the Data Acquisition and the Data Analysis systems. The library is a collection of LabVIEW Virtual Instruments that permts the job submission to a Windows HPC cluster. Jobs results can be easaly collected in order to perform actions via the DAQ control. Full documentation and examples are included.markgroves.us: Hello this is the blog template for http://markgroves.us. MostrarDireccion: Muestra la Direccion donde Reside cada personaMSPTH2012: This project is for MSPTH2012. Pattern Rolling File Appender for log4net: Appender for log4net that is combination of PatternFileAppender and RollingFileAppenderPowershell By Example: The vision of Powershell By Example is to give those interested in Powershell the chance to learn Powershell scripting by example with the goal of empowering them to use Powershell to maintain their own Windows environments. Practica Cuarto A: proyecto bakanProvidence: Providence is an application meant to capture audio, video, and screen-shots for various purposes.Proyecto T2: Tarea 2 - aprendiendo a utilizar la herramientaServer Config Tools: ??? ?????? IIS ?????SharePoint Scheduling Assistant: Scheduling assistant built for schools and universities. Works with out-of-the-box list and involves no custom workflows.Steam Group Players: This tool is meant to allow access to Steam community groups with the ability to sort group members according to hours spent playing specific games (as well as overall play time). The reason for starting this project was to allow a "player of the week"-selection that is slightly more complex than picking one by random or just by total hours played (recently).t2belenlm4c: Ana Belen LandaTaskLogger: Handy little pop-up that allows you to track time spent on project tasks. Can be used to generate timesheets.TechnicBlog: ????TPL DataFlow Debugger Visualizer: Graphic debugger visualizer to TPL DataFlow networks enable to see live state of blocks and relations Compatible with VS 2012 RC VsDoc2JsDoc: The goal of this project is to convert VSDoc JavaScript comments of JayData classes to JSDoc comment format. Using this tool you can generate the API reference of your JayData components and keep your JavaScript documentation up-to-date.WorkOutTimer: WorkOutTimer This little tool provides an easy to use timer for your workouts, trainings, and more... It has two time period, one for working, and one to be cool! By default work time is set to 2 minutes, cool time is set to 1minute (Kick boxing settings), but you can set up each period time as you want. You can hang up, restart, or reset time. It offers a high visibility timer. It also counts rounds. So have great workout! If you use it and you think it’s cool for y...XLIFF Editor: This is an attempt at making an open source XLIFF editor for Windows. I am using the Open Language Tools Editor as the primary source for the ideas of the XLIFF Editor. I am new to C# so this is is for me an ambitious learning and hopefull succesfull project. Any help in positive criticism will be looked at gratefully. xNet: xNet - a class library for .NET Framework, which includes: - Classes for work with proxy servers: HTTP, Socks4 (and), Socks5. - Classes for work with HTTP 1.0/1.1 protocol: keep-alive, gzip, deflate, chunked, SSL, proxies and more. - Classes for work with multithreading: _a multithreaded bypassing the collection, asynchronous events and more_. - Classes helpers that extend standard classes .NET Framework: FileHelper, DirectoryHelper, StringHelper, XmlHelper, BitHelper and others.?????? «??????????? ??????»: ??????????? ??????????: description

    Read the article

  • Tell me what&rsquo;s wrong! &ndash; An XNA sample demonstrating exception handling and reporting in

    - by George Clingerman
    I’ve always enjoyed using Nick Gravelyn’s exception handling in all of my games. You’re always going to encounter those unhandled exception that your players are going to ferret out and having a method to display them rather than just crashing to the dashboard is definitely more of an elegant solution. But the other day I got to thinking…what if we could do more? What if instead of just displaying the error, we could encourage the players to send us the error. So I started playing with that an expanding upon Nick’s sample code to see what I could come up with. I got close to what I envisioned, but unfortunately there were some limitations to just what the XNA API could do. In my head I was picturing the players hitting “Send Message” and a 360 message would just be sent to the XBLIG developer. Unfortunately, you can only send messages in an XNA game to someone you’re currently in a network session with. Since I didn’t want to have a 360 server running all the time, virally connecting to players just to get error messages, I did the next best thing and just open up a 360 message and encourage them to manually enter the gamertag. Maybe someday we’ll be able to do that a little better, but this works for now. In the sample, players can hit the “A” button or key to generate in an exception. If the debugger is not attached, then the Exception message screen will be shown explaining what has happened and giving the player a chance to send a 360 message to the gamertag provided or maybe even just send an email. Nick’s code has been changed just a bit. It now accepts any PlayerIndex (no longer hard coded to just PlayerIndex.One) and it no longer uses a MessageBox to get the users selection. The code has also been modified so that it works both for the 360 and for the PC. Check out “Tell me what’s wrong!” and let me know if you have any thoughts or suggestions. I really do appreciate the feedback.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >