Search Results

Search found 49963 results on 1999 pages for 'entity system'.

Page 32/1999 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• How to remove NTFS system files from a previous Vista installation

  - by Boldewyn

  I'm trying to shrink my system partition under Win Vista. It's all fine, except that in front of the last 300MB of the volume sits a single file, that cannot be moved by defrag or other means from its position. It's called C:\$Extend\$UsnJrnl:$J, and my assumtion is, that it is left from a previous installation of Vista, when I re-set up the system. Now, googling for this kind of files brings interesting results, but no solution to my problem: Files left on the disk can become ownerless in a new setup of Windows and inaccessible (even for administrators). To be able to access them again, I found the tip to use takeown to re-assign them to the Admin group (or anyone else). Works like a charm for normal files, but not for the C:\$Extend stuff. The C:\$Extend folder is a system folder of the NTFS file system, where the journal is stored (especially in a file called $UsnJrnl:$Data, whose name is surprisingly close to mine). You can delete the journal with fsutil usn /delete C:, however, this doesn't work from within the booted system (as I found out trying). Also, I'm not quite sure of the side effects. You can't move the NTFS own files with standard defrag tools. The same holds, by the way, for not accessible files. Every bit of knowledge out there is targeted to either not accessible files or the $Extend NTFS stuff, but noone addresses my problem involving both, an inaccessible system file. Question: How can I remove this file, or at least how can I move it on the disk?

  Read the article

• Mixing Silverlight-Specific System.Xml.Linq dll with Non-Silverlight System.Xml.Linq dll

  - by programatique

  I have a Logic layer that references Silverlight's System.Xml.Linq dll and a GUI that is in WPF (hence using the non-Silverlight System.Xml.Linq dll). When I attempt to pass an XElement from GUI project to a method in the Logic project, I am getting (basically) "XElement is not of type XElement" errors. To complicate matter, I am unable to edit the Logic layer project. The Non-Silverlight DLL is at: C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll THe Silverlight DLL is at: C:\Program Files (x86)\Microsoft SDKs\Silverlight\v3.0\Libraries\Client\System.Xml.Linq.dll I am new to C# but I'm fairly sure my issue is that I am referencing different DLL's to access the System.Xml.Linq namespace. I attempted to replace my non-Silverlight System.Xml.Linq.dll with the Silverlight's System.Xml.Linq.dll, but received assembly errors. Is there any way to resolve this short of scrapping my WPF GUI project and creating a Silverlight project?

  Read the article

• postgres - sharing same pg_hba.conf between IPV4 system and IPV6 system

  - by StackTrace

  I am trying to package postgres from one machine to another. The source is windows 7 with IP V6 and target is windows XP with IPv4. Starting postgres on windows XP gives error 2010-11-01 12:01:07 IST LOG: invalid IP address "::1": Unknown host 2010-11-01 12:01:07 IST CONTEXT: line 76 of configuration file "C:/postgres/data/pg_hba.conf" 2010-11-01 12:01:07 IST FATAL: could not load pg_hba.conf -- postgres - sharing same pg_hba.conf between IpV4 system and IpV6 system Here is how my pg_hba.conf looks like # TYPE DATABASE USER CIDR-ADDRESS METHOD # IPv4 local connections: host all all 127.0.0.1/32 trust # IPv6 local connections: host all all ::1/128 trust

  Read the article

• Can I remove the systems from a component entity system?

  - by nathan

  After reading a lot about entity/component based engines. I feel like there is no real definition for this kind of engine. Reading this thread: Implementing features in an Entity System and the linked article made me think a lot. I did not feel that comfortable using System concept so I'll write something else, inspired by this pattern. I'd like to know if you think it's a good way to organize game code and what improvements can be made. Regarding a more strict implementation of entity/component based engine, is my solution viable? Do I risk getting stuck at any point due to the lack of flexibility of this implementation (or anything else)? My engine, as for entity/component patterns has entities and components, no systems since the game logic is handled by components. Also, I think the main difference is the fact that my engine will use inherence and OOP concepts in general, I mean, I don't try to minimize them. Entity: an entity is an abstract class. It holds his position, width and height, scale and a list of linked components. The current implementation can be found here (java). Every frame, the entity will be updated (i.e all the components linked to this entity will be updated), and rendered, if a render component is specified. Component: like for entity, a component is an abstract class that must be extended to create new components. The behavior of an entity is created through his components collection. The component implementation can be found here. Components are updated when the owning entity is updated or for only one specific component (render component), rendered. Here is an example of a logic component (i.e not a renderable component, a component that's updated each frame) in charge of listening for keyboard events and a render component in charge of display a plain sprite (i.e not animated).

  Read the article

• Partial Trust in WPF 4

  - by Hadi Eskandari

  I've started a new project in WPF 4 (.NET 4) and trying to see if I can run it in xbap mode. I need to run the application in Full Trust with the new mode made available in .NET 4 which asks the end user if the full trust application should be run. I've set the "Security" mode to "Full Trust" application, and it builds just fine. When I run it, an exception is thrown and IE error message shows the following error. Any ways around it?? Startup URI: T:\projects\Hightech Sources\PayRoll\PayRoll.Web\publish\PayRoll.Web.xbap Application Identity: file:///T:/projects/Hightech%20Sources/PayRoll/PayRoll.Web/publish/PayRoll.Web.xbap#PayRoll.Web.xbap, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1d910f49755d2c97, processorArchitecture=msil/PayRoll.Web.exe, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1d910f49755d2c97, processorArchitecture=msil, type=win32 System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessSecurityEngine.Check(CodeAccessPermission cap, StackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at PayRoll.Web.App.SelectAssemblies() at Caliburn.PresentationFramework.ApplicationModel.CaliburnApplication..ctor() at PayRoll.Web.App..ctor() at PayRoll.Web.App.Main() at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel) at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly() at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData) at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext) at System.Windows.Interop.PresentationApplicationActivator.CreateInstance(ActivationContext actCtx) at System.Activator.CreateInstance(ActivationContext activationContext) at System.AppDomain.Setup(Object arg) at System.AppDomain.nCreateInstance(String friendlyName, AppDomainSetup setup, Evidence providedSecurityInfo, Evidence creatorsSecurityInfo, IntPtr parentSecurityDescriptor) at System.Runtime.Hosting.ApplicationActivator.CreateInstanceHelper(AppDomainSetup adSetup) at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData) at System.Windows.Interop.PresentationApplicationActivator.CreateInstance(ActivationContext actCtx) at System.Activator.CreateInstance(ActivationContext activationContext) at System.Deployment.Application.DeploymentManager.ExecuteNewDomain() at System.Deployment.Application.InPlaceHostingManager.Execute() at MS.Internal.AppModel.XappLauncherApp.ExecuteDownloadedApplication() at System.Windows.Interop.DocObjHost.RunApplication(ApplicationRunner runner) at MS.Internal.AppModel.XappLauncherApp.XappLauncherApp_Exit(Object sender, ExitEventArgs e) at System.Windows.Application.OnExit(ExitEventArgs e) at System.Windows.Application.DoShutdown() at System.Windows.Application.ShutdownImpl() at System.Windows.Application.ShutdownCallback(Object arg) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.StartDispatcherInBrowser(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.FileIOPermission

  Read the article

• nginx bad gateway 502 with mono fastcgi

  - by Bradley Lederholz Leatherwood

  Hello so I have been trying to get my website to run on mono (on ubuntu server) and I have followed these tutorials almost to the letter: However when my directory is not blank fastcgi logs reveal this: Notice Beginning to receive records on connection. Error Failed to process connection. Reason: Exception has been thrown by the target of an invocation. I am not really sure what this means, and depending on what I do I can get another error that tells me the resource cannot be found: The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /Default.aspx/ Version information: Mono Runtime Version: 2.10.8 (tarball Thu Aug 16 23:46:03 UTC 2012) ASP.NET Version: 4.0.30319.1 If I should provide some more information please let me know. Edit: I am now getting a nginx gateway error. My nginx configuration file looks like this: server { listen 2194; server_name localhost; access_log $HOME/WWW/nginx.log; location / { root $HOME/WWW/dev/; index index.html index.html default.aspx Default.aspx Index.cshtml; fastcgi_index Views/Home/; fastcgi_pass 127.0.0.1:8000; include /etc/nginx/fastcgi_params; } } Running the entire thing with xsp4 I have discovered what the "Exception has been thrown by the target of an invocation." Handling exception type TargetInvocationException Message is Exception has been thrown by the target of an invocation. IsTerminating is set to True System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. Server stack trace: at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in :0 at System.Reflection.MethodBase.Invoke (System.Object obj, System.Object[] parameters) [0x00000] in :0 at System.Runtime.Serialization.ObjectRecord.LoadData (System.Runtime.Serialization.ObjectManager manager, ISurrogateSelector selector, StreamingContext context) [0x00000] in :0 at System.Runtime.Serialization.ObjectManager.DoFixups () [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (BinaryElement elem, System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] in :0 at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] in :0 at System.Runtime.Remoting.RemotingServices.DeserializeCallData (System.Byte[] array) [0x00000] in :0 at (wrapper xdomain-dispatch) System.AppDomain:DoCallBack (object,byte[]&,byte[]&) Exception rethrown at [0]: --- System.ArgumentException: Couldn't bind to method 'SetHostingEnvironment'. at System.Delegate.GetCandidateMethod (System.Type type, System.Type target, System.String method, BindingFlags bflags, Boolean ignoreCase, Boolean throwOnBindFailure) [0x00000] in :0 at System.Delegate.CreateDelegate (System.Type type, System.Type target, System.String method, Boolean ignoreCase, Boolean throwOnBindFailure) [0x00000] in :0 at System.Delegate.CreateDelegate (System.Type type, System.Type target, System.String method) [0x00000] in :0 at System.DelegateSerializationHolder+DelegateEntry.DeserializeDelegate (System.Runtime.Serialization.SerializationInfo info) [0x00000] in :0 at System.DelegateSerializationHolder..ctor (System.Runtime.Serialization.SerializationInfo info, StreamingContext ctx) [0x00000] in :0 at (wrapper managed-to-native) System.Reflection.MonoCMethod:InternalInvoke (System.Reflection.MonoCMethod,object,object[],System.Exception&) at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in :0 --- End of inner exception stack trace --- at (wrapper xdomain-invoke) System.AppDomain:DoCallBack (System.CrossAppDomainDelegate) at (wrapper remoting-invoke-with-check) System.AppDomain:DoCallBack (System.CrossAppDomainDelegate) at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] in :0 at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] in :0 at Mono.WebServer.XSP.Server.RealMain (System.String[] args, Boolean root, IApplicationHost ext_apphost, Boolean quiet) [0x00000] in :0 at Mono.WebServer.XSP.Server.Main (System.String[] args) [0x00000] in :0

  Read the article

• Argument exception after trying to use TryGetObjectByKey

  - by Rickjaah

  Hi, I'm trying to retrieve an object from my database using entity (framework 4) When I use the following code it gives an ArgumentException: An item with the same key has already been added. if (databaseContext.TryGetObjectByKey(entityKey, out result)) { return (result != null && result is TEntityObject) ? result as TEntityObject : null; } else { return null; } When I check the objectContext, I see the entities, but only if I enumerate the specific list of entities manually using VS2010, it works. What am I missing? Do I have to do something else before i can get the item from the database? I have lazy loading set to true. I searched google, but could not find any results, the same for the msdn library

  Read the article

• Need help understanding Generics, How To Abstract Types Question.

  - by kmacmahon

  I could use some really good links that explain Generics and how to use them. But I also have a very specific question, relater to working on a current project. Given this class constructor: public class SecuredDomainViewModel<TDomainContext, TEntity> : DomainViewModel<TDomainContext, TEntity> where TDomainContext : DomainContext, new() where TEntity : Entity, new() public SecuredDomainViewModel(TDomainContext domainContext, ProtectedItem protectedItem) : base(domainContext) { this.protectedItem = protectedItem; } And its creation this way: DomainViewModel d; d = new SecuredDomainViewModel<MyContext, MyEntityType>(this.context, selectedProtectedItem); Assuming I have 20 different EntityTypes within MyContext, is there any easier way to call the constructor without a large switch statement? Also, since d is DomainViewModel and I later need to access methods from SecuredDomainViewModel, it seems I need to do this: if (((SecuredDomainViewModel<MyContext, MyEntityType>)d).CanEditEntity) But again "MyEntityType" could actually be one of 20 diffent types. Is there anyway to write these types of statements where MyEntityType is returned from some sort of Reflection?

  Read the article

• Need help understanding Generics, How To Abstract Types Question.

  - by kmacmahon

  I could use some really good links that explain Generics and how to use them. But I also have a very specific question, relater to working on a current project. Given this class constructor: public class SecuredDomainViewModel<TDomainContext, TEntity> : DomainViewModel<TDomainContext, TEntity> where TDomainContext : DomainContext, new() where TEntity : Entity, new() And its creation this way: DomainViewModel d; d = new SecuredDomainViewModel<MyContext, MyEntityType>(this.context, selectedProtectedItem); Assuming I have 20 EntityTypes within MyContext, is there any easier way to call the constructor without a large switch statement? Also, since d is DomainViewModel and I want to access methods for SecuredDomainViewModel, it seems I need to do this: if (((SecuredDomainViewModel<MyContext, MyEntityType>)d).IsBusy) But again "MyEntityType" could actually be one of 20 types. Is there anyway to write these types of statements where MyEntityType is returned from some sort of Reflection?

  Read the article

• Instantiating a context in LINQ to Entities

  - by Jagd

  I've seen two different manners that programmers approach when creating an entity context in their code. The first is like such, and you can find it all over the MSDN code examples: public void DoSomething() { using TaxableEducationEntities context = new TaxableEducationEntities()) { // business logic and whatever else } } The second is to create the context as a private attribute in some class that encapsulates your business logic. So you would have something like: public class Education_LINQ { private TaxableEducationEntities context = new TaxableEducationEntities(); public void DoSomething() { var result = from a in context.luAction select a; // business logic and whatever else } } Which way is more efficient? Assume that you have two methods, one called DoSomething1() and another called DoSomething2(), and both methods incorporate the using statement to open the context and do whatever with it. Were you to call one method after the other, would there be any superfluous overhead going on, since essentially both methods create the context and then clean it up when they're done? As opposed to having just one private attribute that is created when a class object is instantiated, and then in turn cleaned up when the object goes out of scope?

  Read the article

• How do I Relate these 4 Tables

  - by Baddie

  Trying to setup a simple Thread/Poll table mapping. Here is what I have: Threads table ThreadID (Primary Key/Identity Column) Polls table PollID (Primary Key, FK for ThreadID for one-to-one relation) Question PollOptions table PollOptionID (Identity/Primary Key) Text PollID PollVotes table PollVoteID (Primary Key/Identity) PollOptionID I'm not sure if this is a proper relationship. It seems wrong but I'm not sure whats wrong with it. A Thread can have 0 or 1 Poll. A Poll can have 2 or more PollOptions. A PollOption can have 0 or many PollVotes. I'm going to be using Entity Framework and before I generate the code for it (VS 2010, .NET 4) I want to make sure I have the proper relationship mapping.

  Read the article

• Is there an ORM with APIs to be used programatically?

  - by Kabeer

  Hello. Neither did not get any response for my previous question, nor enough views :) So here I am now framing my query afresh. Is there any ORM that offers APIs to be used programatically? In my situation, a user will be helped through a wizard to define some entities. Thereafter those entites will be created in a database in form of tables (there will of course be some improvization). I need an ORM that offers APIs for modeling and creating entities during application runtime and not just during design time. Mine is a .Net application, therefore I was looking at Entity Framework. However, to me it looked tied to Visual Studio (I may be wrong also as I am new to it). Any recommendations? Or alternative point of view?

  Read the article

• A generic Find method to search by Guid type for class implementing IDbSet interface

  - by imak

  I am implementing a FakeDataSet class by implementing IDbSet interface. As part of implementing this interface, I have to implement Find method. All my entity classes has an Guid type Id column. I am trying to implement Find method for this FakeDbSet class but having hard time to write it in a generic way. Below is my attempts for writing this method but since it does not know about Id been Guid type, I am getting compilation error on m.Id call. Any ideas on how this could be accomplished? public class FakeDataSet<T> : IDbSet<T> where T: class, new() { // Other methods for implementing IDbSet interface public T Find(params object[] keyValues) { var keyValue = (Guid)keyValues.FirstOrDefault(); return this.SingleOrDefault(m => m.Id == keyValue); // How can I write this } }

  Read the article

• Entity Framework 4.3.1 Code based Migrations and Connector/Net 6.6

  - by GABMARTINEZ

   Code-based migrations is a new feature as part of the Connector/Net support for Entity Framework 4.3.1. In this tutorial we'll see how we can use it so we can keep track of the changes done to our database creating a new application using the code first approach. If you don't have a clear idea about how code first works we highly recommend you to check this subject before going further with this tutorial. Creating our Model and Database with Code First  From VS 2010  1. Create a new console application 2.  Add the latest Entity Framework official package using Package Manager Console (Tools Menu, then Library Package Manager -> Package Manager Console). In the Package Manager Console we have to type  Install-Package EntityFramework This will add the latest version of this library.  We will also need to make some changes to your config file. A <configSections> was added which contains the version you have from EntityFramework.  An <entityFramework> section was also added where you can set up some initialization. This section is optional and by default is generated to use SQL Express. Since we don't need it for now (we'll see more about it below) let's leave this section empty as shown below. 3. Create a new Model with a simple entity. 4. Enable Migrations to generate the our Configuration class. In the Package Manager Console we have to type  Enable-Migrations; This will make some changes in our application. It will create a new folder called Migrations where all the migrations representing the changes we do to our model.  It will also create a Configuration class that we'll be using to initialize our SQL Generator and some other values like if we want to enable Automatic Migrations.  You can see that it already has the name of our DbContext. You can also create you Configuration class manually. 5. Specify our Model Provider. We need to specify in our Class Configuration that we'll be using MySQLClient since this is not part of the generated code. Also please make sure you have added the MySql.Data and the MySql.Data.Entity references to your project. using MySql.Data.Entity;   // Add the MySQL.Data.Entity namespace public Configuration() { this.AutomaticMigrationsEnabled = false; SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());    // This will add our MySQLClient as SQL Generator } 6. Add our Data Provider and set up our connection string <connectionStrings> <add name="PersonalContext" connectionString="server=localhost;User Id=root;database=Personal;" providerName="MySql.Data.MySqlClient" /> </connectionStrings> <system.data> <DbProviderFactories> <remove invariant="MySql.Data.MySqlClient" /> <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.6.2.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" /> </DbProviderFactories> </system.data> * The version recommended to use of Connector/Net is 6.6.2 or earlier. At this point we can create our database and then start working with Migrations. So let's do some data access so our database get's created. You can run your application and you'll get your database Personal as specified in our config file. Add our first migration Migrations are a great resource as we can have a record for all the changes done and will generate the MySQL statements required to apply these changes to the database. Let's add a new property to our Person class public string Email { get; set; } If you try to run your application it will throw an exception saying  The model backing the 'PersonelContext' context has changed since the database was created. Consider using Code First Migrations to update the database (http://go.microsoft.com/fwlink/?LinkId=238269). So as suggested let's add our first migration for this change. In the Package Manager Console let's type Add-Migration AddEmailColumn Now we have the corresponding class which generate the necessary operations to update our database. namespace MigrationsFromScratch.Migrations { using System.Data.Entity.Migrations; public partial class AddEmailColumn : DbMigration { public override void Up(){ AddColumn("People", "Email", c => c.String(unicode: false)); } public override void Down() { DropColumn("People", "Email"); } } } In the Package Manager Console let's type Update-Database Now you can check your database to see all changes were succesfully applied. Now let's add a second change and generate our second migration public class Person   {       [Key]       public int PersonId { get; set;}       public string Name { get; set; }       public string Address {get; set;}       public string Email { get; set; }       public List<Skill> Skills { get; set; }   }   public class Skill   {     [Key]     public int SkillId { get; set; }     public string Description { get; set; }   }   public class PersonelContext : DbContext   {     public DbSet<Person> Persons { get; set; }     public DbSet<Skill> Skills { get; set; }   } If you would like to customize any part of this code you can do that at this step. You can see there is the up method which can update your database and the down that can revert the changes done. If you customize any code you should make sure to customize in both methods. Now let's apply this change. Update-database -verbose I added the verbose flag so you can see all the SQL generated statements to be run. Downgrading changes So far we have always upgraded to the latest migration, but there may be times when you want downgrade to a specific migration. Let's say we want to return to the status we have before our last migration. We can use the -TargetMigration option to specify the migration we'd like to return. Also you can use the -verbose flag. If you like to go  back to the Initial state you can do: Update-Database -TargetMigration:$InitialDatabase  or equivalent: Update-Database -TargetMigration:0  Migrations doesn't allow by default a migration that would ocurr in a data loss. One case when you can got this message is for example in a DropColumn operation. You can override this configuration by setting AutomaticMigrationDataLossAllowed to true in the configuration class. Also you can set your Database Initializer in case you want that these Migrations can be applied automatically and you don't have to go all the way through creating a migration and updating later the changes. Let's see how. Database Initialization by Code We can specify an initialization strategy by using Database.SetInitializer (http://msdn.microsoft.com/en-us/library/gg679461(v=vs.103)). One of the strategies that I found very useful when you are at a development stage (I mean not for production) is the MigrateDatabaseToLatestVersion. This strategy will make all the necessary migrations each time there is a change in our model that needs a database replication, this also implies that we have to enable AutomaticMigrationsEnabled flag in our Configuration class. public Configuration()         {             AutomaticMigrationsEnabled = true;             AutomaticMigrationDataLossAllowed = true;             SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());    // This will add our MySQLClient as SQL Generator          } In the new EntityFramework section of your Config file we can set this at a context level basis.  The syntax is as follows: <contexts> <context type="Custom DbContext name, Assembly name"> <databaseInitializer type="System.Data.Entity.MigrateDatabaseToLatestVersion`2[[ Custom DbContext name, Assembly name],  [Configuration class name, Assembly name]],  EntityFramework" /> </context> </contexts> In our example this would be: The syntax is kind of odd but very convenient. This way all changes will always be applied when we do any data access in our application. There are a lot of new things to explore in EF 4.3.1 and Migrations so we'll continue writing some more posts about it. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Hope you found this information useful. Happy MySQL/.Net Coding! 

  Read the article

• How can I get System.Type from "System.Drawing.Color" string

  - by jonny

  I have an xml stored property of some control <Prop Name="ForeColor" Type="System.Drawing.Color" Value="-16777216" /> I want to convert it back as others System.Type type = System.Type.GetType(propertyTypeString); object propertyObj = TypeDescriptor.GetConverter(type).ConvertFromString(propertyValueString); System.Type.GetType("System.Drawing.Color") returns null. The question is how one can correctly get color type from string (it will be better not to do a special case just for Color properties) Update from time to time this xml will be edited by hand

  Read the article

• mod_mono 'Service Temporarily Unavailable' issue

  - by Charlie Somerville

  I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

  Read the article

• Keeping track of File System Utilization in Ops Center 12c

  - by S Stelting

  Enterprise Manager Ops Center 12c provides significant monitoring capabilities, combined with very flexible incident management. These capabilities even extend to monitoring the file systems associated with Solaris or Linux assets. Depending on your needs you can monitor and manage incidents, or you can fine tune alert monitoring rules to specific file systems. This article will show you how to use Ops Center 12c to Track file system utilization Adjust file system monitoring rules Disable file system rules Create custom monitoring rules If you're interested in this topic, please join us for a WebEx presentation! Date: Thursday, November 8, 2012 Time: 11:00 am, Eastern Standard Time (New York, GMT-05:00) Meeting Number: 598 796 842 Meeting Password: oracle123 To join the online meeting ------------------------------------------------------- 1. Go to https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209833597&UID=1512095432&PW=NOWQ3YjJlMmYy&RT=MiMxMQ%3D%3D 2. If requested, enter your name and email address. 3. If a password is required, enter the meeting password: oracle123 4. Click "Join". To view in other time zones or languages, please click the link: https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209833597&UID=1512095432&PW=NOWQ3YjJlMmYy&ORT=MiMxMQ%3D%3D   Monitoring File Systems for OS Assets The Libraries tab provides basic, device-level information about the storage associated with an OS instance. This tab shows you the local file system associated with the instance and any shared storage libraries mounted by Ops Center. More detailed information about file system storage is available under the Analytics tab under the sub-tab named Charts. Here, you can select and display the individual mount points of an OS, and export the utilization data if desired: In this example, the OS instance has a basic root file partition and several NFS directories. Each file system mount point can be independently chosen for display in the Ops Center chart. File Systems and Incident  Reporting Every asset managed by Ops Center has a "monitoring policy", which determines what represents a reportable issue with the asset. The policy is made up of a bunch of monitoring rules, where each rule describes An attribute to monitor The conditions which represent an issue The level or levels of severity for the issue When the conditions are met, Ops Center sends a notification and creates an incident. By default, OS instances have three monitoring rules associated with file systems: File System Reachability: Triggers an incident if a file system is not reachable NAS Library Status: Triggers an incident for a value of "WARNING" or "DEGRADED" for a NAS-based file system File System Used Space Percentage: Triggers an incident when file system utilization grows beyond defined thresholds You can view these rules in the Monitoring tab for an OS: Of course, the default monitoring rules is that they apply to every file system associated with an OS instance. As a result, any issue with NAS accessibility or disk utilization will trigger an incident. This can cause incidents for file systems to be reported multiple times if the same shared storage is used by many assets, as shown in this screen shot: Depending on the level of control you'd like, there are a number of ways to fine tune incident reporting. Note that any changes to an asset's monitoring policy will detach it from the default, creating a new monitoring policy for the asset. If you'd like, you can extract a monitoring policy from an asset, which allows you to save it and apply the customized monitoring profile to other OS assets. Solution #1: Modify the Reporting Thresholds In some cases, you may want to modify the basic conditions for incident reporting in your file system. The changes you make to a default monitoring rule will apply to all of the file systems associated with your operating system. Selecting the File Systems Used Space Percentage entry and clicking the "Edit Alert Monitoring Rule Parameters" button opens a pop-up dialog which allows you to modify the rule. The first screen lets you decide when you will check for file system usage, and how long you will wait before opening an incident in Ops Center. By default, Ops Center monitors continuously and reports disk utilization issues which exist for more than 15 minutes. The second screen lets you define actual threshold values. By default, Ops Center opens a Warning level incident is utilization rises above 80%, and a Critical level incident for utilization above 95% Solution #2: Disable Incident Reporting for File System If you'd rather not report file system incidents, you can disable the monitoring rules altogether. In this case, you can select the monitoring rules and click the "Disable Alert Monitoring Rule(s)" button to open the pop-up confirmation dialog. Like the first solution, this option affects all file system monitoring. It allows you to completely disable incident reporting for NAS library status or file system space consumption. Solution #3: Create New Monitoring Rules for Specific File Systems If you'd like to have the greatest flexibility when monitoring file systems, you can create entirely new rules. Clicking the "Add Alert Monitoring Rule" (the icon with the green plus sign) opens a wizard which allows you to define a new rule.  This rule will be based on a threshold, and will be used to monitor operating system assets. We'd like to add a rule to track disk utilization for a specific file system - the /nfs-guest directory. To do this, we specify the following attribute FileSystemUsages.name=/nfs-guest.usedSpacePercentage The value of name in the attribute allows us to define a specific NFS shared directory or file system... in the case of this OS, we could have chosen any of the values shown in the File Systems Utilization chart at the beginning of this article. usedSpacePercentage lets us define a threshold based on the percentage of total disk space used. There are a number of other values that we could use for threshold-based monitoring of FileSystemUsages, including freeSpace freeSpacePercentage totalSpace usedSpace usedSpacePercentage The final sections of the screen allow us to determine when to monitor for disk usage, and how long to wait after utilization reaches a threshold before creating an incident. The next screen lets us define the threshold values and severity levels for the monitoring rule: If historical data is available, Ops Center will display it in the screen. Clicking the Apply button will create the new monitoring rule and active it in your monitoring policy. If you combine this with one of the previous solutions, you can precisely define which file systems will generate incidents and notifications. For example, this monitoring policy has the default "File System Used Space Percentage" rule disabled, but the new rule reports ONLY on utilization for the /nfs-guest directory. Stay Connected: Twitter |  Facebook |  YouTube |  Linkedin |  Newsletter

  Read the article

• SqlBulkCopy and Entity Framework

  - by KP

  My current project consists of 3 standard layers: data, business, and presentation. I would like to use data entities for all my data access needs. Part of the functionality of the app will that it will need to copy all data within a flat file into a database. The file is not so big so I can use SqlBulkCopy. I have found several articles regarding the usage of SqlBulkCopy class in .NET. However, all the articles are using DataTables to move data back and forth. Is there a way to use data entities along with SqlBulkCopy or will I have to use DataTables?

  Read the article

• Loading any MVC page fails with the error "An item with the same key has already been added."

  - by MajorRefactoring

  I am having an intermittent issue that is appearing on one server only, and is causing all MVC pages to fail to load with the error "An item with the same key has already been added." Restarting the application pool fixes the issue, but until then, loading any mvc page throws the following exception: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 10/11/2012 08:09:24 Event time (UTC): 10/11/2012 08:09:24 Event ID: d76264aedc4241d4bce9247692510466 Event sequence: 6407 Event occurrence: 30 Event detail code: 0 Application information: Application domain: /LM/W3SVC/21/ROOT-2-129969647741292058 Trust level: Full Application Virtual Path: / Application Path: d:\websites\SiteAndAppPoolName\ Machine name: UKSERVER Process information: Process ID: 6156 Process name: w3wp.exe Account name: IIS APPPOOL\SiteAndAppPoolName Exception information: Exception type: ArgumentException Exception message: An item with the same key has already been added. Server stack trace: at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at System.Linq.Enumerable.ToDictionary[TSource,TKey,TElement](IEnumerable`1 source, Func`2 keySelector, Func`2 elementSelector, IEqualityComparer`1 comparer) at System.Web.WebPages.Scope.WebConfigScopeDictionary.<>c__DisplayClass4.<.ctor>b__0() at System.Lazy`1.CreateValue() Exception rethrown at [0]: at System.Lazy`1.get_Value() at System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) at System.Web.Mvc.ViewContext.ScopeGet[TValue](IDictionary`2 scope, String name, TValue defaultValue) at System.Web.Mvc.ViewContext.ScopeCache.Get(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.ViewContext.GetClientValidationEnabled(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.Html.FormExtensions.FormHelper(HtmlHelper htmlHelper, String formAction, FormMethod method, IDictionary`2 htmlAttributes) at System.Web.Mvc.Html.FormExtensions.BeginForm(HtmlHelper htmlHelper, String actionName, String controllerName) at ASP._Page_Views_Dashboard_Functions_BookingQuickLookup_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions\BookingQuickLookup.cshtml:line 3 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.PartialExtensions.Partial(HtmlHelper htmlHelper, String partialViewName, Object model, ViewDataDictionary viewData) at ASP._Page_Views_Dashboard_Functions_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions.cshtml:line 5 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.RenderPartialExtensions.RenderPartial(HtmlHelper htmlHelper, String partialViewName, Object model) at ASP._Page_Views_Dashboard_Index_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Index.cshtml:line 9 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) at System.Web.Mvc.MvcHandler.<>c__DisplayClass6.<>c__DisplayClassb.<BeginProcessRequest>b__5() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.MvcHandler.<>c__DisplayClasse.<EndProcessRequest>b__d() at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Request information: Request URL: http://SiteAndAppPoolName.spawtz.com/Dashboard Request path: /Dashboard User host address: 86.164.135.41 User: Is authenticated: False Authentication Type: Thread account name: IIS APPPOOL\SiteAndAppPoolName Thread information: Thread ID: 17 Thread account name: IIS APPPOOL\SiteAndAppPoolName Is impersonating: False Stack trace: at System.Lazy`1.get_Value() at System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) at System.Web.Mvc.ViewContext.ScopeGet[TValue](IDictionary`2 scope, String name, TValue defaultValue) at System.Web.Mvc.ViewContext.ScopeCache.Get(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.ViewContext.GetClientValidationEnabled(IDictionary`2 scope, HttpContextBase httpContext) at System.Web.Mvc.Html.FormExtensions.FormHelper(HtmlHelper htmlHelper, String formAction, FormMethod method, IDictionary`2 htmlAttributes) at System.Web.Mvc.Html.FormExtensions.BeginForm(HtmlHelper htmlHelper, String actionName, String controllerName) at ASP._Page_Views_Dashboard_Functions_BookingQuickLookup_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions\BookingQuickLookup.cshtml:line 3 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.PartialExtensions.Partial(HtmlHelper htmlHelper, String partialViewName, Object model, ViewDataDictionary viewData) at ASP._Page_Views_Dashboard_Functions_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Functions.cshtml:line 5 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.Html.RenderPartialExtensions.RenderPartial(HtmlHelper htmlHelper, String partialViewName, Object model) at ASP._Page_Views_Dashboard_Index_cshtml.Execute() in d:\Websites\SiteAndAppPoolName\Views\Dashboard\Index.cshtml:line 9 at System.Web.WebPages.WebPageBase.ExecutePageHierarchy() at System.Web.Mvc.WebViewPage.ExecutePageHierarchy() at System.Web.WebPages.WebPageBase.ExecutePageHierarchy(WebPageContext pageContext, TextWriter writer, WebPageRenderingBase startPage) at System.Web.Mvc.ViewResultBase.ExecuteResult(ControllerContext context) at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClass1c.<InvokeActionResultWithFilters>b__19() at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultFilter(IResultFilter filter, ResultExecutingContext preContext, Func`1 continuation) at System.Web.Mvc.ControllerActionInvoker.InvokeActionResultWithFilters(ControllerContext controllerContext, IList`1 filters, ActionResult actionResult) at System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) at System.Web.Mvc.Controller.ExecuteCore() at System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) at System.Web.Mvc.MvcHandler.<>c__DisplayClass6.<>c__DisplayClassb.<BeginProcessRequest>b__5() at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass1.<MakeVoidDelegate>b__0() at System.Web.Mvc.MvcHandler.<>c__DisplayClasse.<EndProcessRequest>b__d() at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Custom event details: As mentioned, it's every MVC action that throws this error until the app pool is restarted, and the error seems to be occurring in System.Web.WebPages.Scope.WebConfigScopeDictionary.TryGetValue(Object key, Object& value) Has anyone seen this issue before? It's only happening on this server, on any of the app pools on the server (not confined to this one) and an app pool restart sorts it. Any help much appreciated. Cheers, Matthew

  Read the article

• IQueryable<> from stored procedure (entity framework)

  - by mmcteam

  I want to get IQueryable<> result when executing stored procedure. Here is peace of code that works fine: IQueryable<SomeEntitiy> someEntities; var globbalyFilteredSomeEntities = from se in m_Entities.SomeEntitiy where se.GlobalFilter == 1234 select se; I can use this to apply global filter, and later use result in such way result = globbalyFilteredSomeEntities .OrderByDescending(se => se.CreationDate) .Skip(500) .Take(10); What I want to do - use some stored procedures in global filter. I tried: Add stored procedure to m_Entities, but it returns IEnumerable<> and executes sp immediately: var globbalyFilteredSomeEntities = from se in m_Entities.SomeEntitiyStoredProcedure(1234); Materialize query using EFExtensions library, but it is IEnumerable<>. If I use AsQueryable() and OrderBy(), Skip(), Take() and after that ToList() to execute that query - I get exception that DataReader is open and I need to close it first(can't paste error - it is in russian). var globbalyFilteredSomeEntities = m_Entities.CreateStoreCommand("exec SomeEntitiyStoredProcedure(1234)") .Materialize<SomeEntitiy>(); //.AsQueryable() //.OrderByDescending(se => se.CreationDate) //.Skip(500) //.Take(10) //.ToList(); Also just skipping .AsQueryable() is not helpful - same exception. When I put ToList() query executes, but it is too expensive to execute query without Skip(), Take().

  Read the article

• Entity Framework: Delete Object and its related entities

  - by Waheed

  Hi, Does anyone know how to delete an object and all of it's related entities. For example i have tables, Products, Category, ProductCategory and productDetails, the productCategory is joining table of both Product and Category. I have red from http://msdn.microsoft.com/en-us/library/bb738580.aspx that Deleting the parent object also deletes all the child objects in the constrained relationship. This result is the same as enabling the CascadeDelete property on the association for the relationship. I am using this code Product productObj = this.ObjectContext.Product.Where(p => p.ProductID.Equals(productID)).First(); if (!productObj.ProductCategory.IsLoaded) productObj.ProductCategory.Load(); if (!productObj.ProductDetails.IsLoaded) productObj.ProductDetails.Load(); //my own methods. base.Delete(productObj); base.SaveAllObjectChanges(); But i am getting error on ObjectContext.SaveChanges(); i.e A relationship is being added or deleted from an AssociationSet 'FK_ProductCategory_Product'. With cardinality constraints, a corresponding 'ProductCategory' must also be added or deleted. Thanks in advance....

  Read the article

• Entity Framework: How to bind related products

  - by Waheed

  I am using the following Linq query from p in Product.Include("ProductDetails.Colors") where p.ProductID.Equals(18) select p; And then using the result of this query to bind the GridView. The productDetails are bind to the grid fine, but the Colors are not bind. To bind colors i am using <%# Eval("Colors.CategoryName") %. Error is " Field or property with the name 'Colors.CategoryName' was not found on the selected data source." But in a loop i am getting this fine. foreach (ProductDetails proDet in pd.ProductDetails) { string bar = proDet.BarCode; string color = proDet.Colors.CategoryName; }

  Read the article

• Entity Framework - ContextBuilder namespace

  - by Matt

  I apologize if this seems like an excessively dumb question. I am trying to use the ContextBuilderClass to generate my Context. I am unable to find the proper assembly and namespace to use it though. Just for reference I am on a full install of VS 2010 Pro.

  Read the article

• Cannot rollback ransaction with Entity Framework

  - by Luca

  I have to do queries on uncommitted changes and I tried to use transactions, but I found that it do not work if there are exceptions. I made a simple example to reproduce the problem. I have a database with only one table called "Tabella" and the table has two fields: "ID" is a autogenerated integer, and "Valore" is an integer with a Unique constraint. Then I try to run this code: using (TransactionScope scope = new TransactionScope()) { Db1Container db1 = new Db1Container(); try { db1.AddToTabella(new Tabella() { Valore = 1 }); db1.SaveChanges(); } catch { } try { db1.AddToTabella(new Tabella() { Valore = 1 }); db1.SaveChanges(); //Unique constraint is violated here and an exception is thrown } catch { } try { db1.AddToTabella(new Tabella() { Valore = 2 }); db1.SaveChanges(); } catch { } //scope.Complete(); //NEVER called } //here everything should be rolled back Now if I look into the database it should contain no records because the transaction should rollback, instead I find two records!!!! One with Valore=1 and one with Valore=2. I am missing something? It looks like the second call to SaveChanges method rollback its own changes and "deletes" the transaction, then the third call to SaveChanges commits the changes of the first and the third insert (at this point it is like the transaction not exists). I also tried to use SaveChanges(false) method (even without calling AcceptAllChanges method), but with no success: I have the same behaviour. I do not want the transaction to be rolled back automatically by SaveChanges, because I want to correct the errors (for example by user interaction in the catch statement) and make a retry. Can someone help me with this? It seems like a "bug", and it is giving me a really big headache...

  Read the article

• Calling Entity Framework function import from code

  - by Mikey Cee

  So I have a stored procedure called Spr_EventLogCreate defined in my database. I have created a function import in my data model called LogEvent with no return type, and I can see this function in the Model Browser tree at MyModel.edmx MyModel EntityContainer Function Imports LogEvent. I thought I should then be able to call the function in my code as follows: var context = new MyModelEntities(); context.LogEvent(...); But the LogEvent() method is not present. I must be being really stupid here, but how do I call my imported function? Using VS 2008 and EF 3.5.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >