Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 32/896 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Boot failure randomly. Can someone help?

    - by desgua
    I often get stuck at the boot on battery. I can suspend and hibernate without any trouble (even on battery). If I plug the energy cable everything goes right most of the time (edited June 13). Adding "acpi=off" doesn't solve the issue. Disabling power save from LAN at BIOS doesn't solve this too. Memory test seems to be ok: I can even compile a kernel without a problem: Has someone a tip for this? (I have the same questions marks in my mind as the image shows if not more :-/ ) obs.: this is an upgraded installation from Natty alpha. edited I (May 22): I've installed a brand new final 11.04 and got the bug again. edited II (June 13): I thought it was solved but it is not. After spending eight days off, the same problem happened even with the power cable connected. I had to reboot about 6 times until success. edited III (June 14): I can boot (even with battery) if I disconnect the cable and take off the battery for a few seconds. This lead me to conclude that maybe something is kept into memory of some hardware. Maybe or maybe not related but I also have touchpad issues (jumps) with this machine. edited IV (June 25): I opened gconf-editor and went to apps gnome-power-manager and disabled everything possibly related to suspend or hibernate. No help. Also I grabbed a Fedora live usb pendrive and got the same problem: So I think it is a hardware problem related issue.

    Read the article

  • How to mount a USB thumb drive as "Fixed" instead of "Removable"

    - by AMissico
    I have over 8 GB in my "Code Library" that I maintain on a 64 GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot, because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable?

    Read the article

  • File Locked on Flash Drive

    - by AtomFury
    I'm completely frustrated. I'm an owner of a OCZ 8GB Rally2 which I've used flawlessly for about 4 months now, and all of a sudden this week I begin getting errors telling me that I can't delete a file due to "make sure the disk is not write-protected, full or and the file is not in-use" dialog. Here's what I've tried: Deleting the file using FileASSASSIN (it's worked on everything else but files on this darn flash drive) Formatting the flash drive and then restoring the backed up information (I format to NTFS, FYI) Any suggestions on what to do?

    Read the article

  • Recognition of USB drive

    - by lamcro
    I have a Motorola phone, with a MicroSD slot, which my Ubuntu machine does not recognize as a USB drive. It does know there is something there since It automatically charges my phone whenever I connect it. using the command lsusb shows it as "Motorola PCS" Is there a way to tell Ubuntu/Linux that the connected hardware is a disk drive?

    Read the article

  • How to make OS X Mavericks Bootable USB flash drive

    - by James1
    i'm trying to make a bootable OS X Mavericks USB flash drive but cannot run the script. Visit this link: http://www.redmondpie.com/how-to-make-os-x-mavericks-bootable-usb-flash-drive-for-a-clean-install/ I followed the script and it fails, after you input the script, enter password then I got a message saying: You must specify both the volume and install application path. Now i don't know what to do. Please help guys!

    Read the article

  • flash drive ejected improperly- lost files

    - by user23166
    I have a flash drive that was used primarily on a Mac, and it was ejected improperly. Now when I put it back in, the computer (I tried 2 different Macs,and 3 PCs) does not even register the flash drive- it does not show up in Finder or in My Computer. Any ideas how to get the lost files back?

    Read the article

  • How to Mount a USB "Thumb" Drive as "Fixed" in Windows (For Indexing)

    - by AMissico
    I have over 8GB in my "Code Library" that I maintain on a 64GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable? All suggestions welcome and greatly appreciated.

    Read the article

  • Install Ubuntu 12.04 on Drive "D"?

    - by Bill Jones
    I have a Dell Inspiron 531S that originally came loaded with Windows Vista. A couple years ago I purchased a copy of Windows 7, formatted the hard drive and installed the updated operating system. In the process I formatted the 10 GB recovery drive partition on drive D as it was no longer needed for Windows Vista. I would really like to install Ubuntu 12.04 LTS alongside Windows 7 using the empty 10 GB drive D:. I have two questions. (1) Can Ubuntu be installed on a separate partition, a drive removed from the boot sector on drive C:? (2) If so would Grub be installed in the boot sector and properly select Windows 7 on drive C: or Ubuntu 12.04 on drive D?

    Read the article

  • Installing Windows XP through Pen Drive

    - by OrangeRind
    I want to install Windows XP on My desktop computer (only XP) but my cd drive has gone bust. I have tried to search for installation tutorials but I found only those in which people tell me how to install it ON the pen drive rather than FROM the pendrive. Please help out! Thanks in Advance

    Read the article

  • Re-format thumb drive

    - by wizlog
    I was trying to put the Windows 8 Consumer Preview onto a thumb drive, when I was asked if I was OK with wiping it (I said yes I as it was blank). I had to sleep my computer during the wiping, and now I can't do anything with my dive. When I put it into my computer: When I click format disk: In short, the disk never reformats (I get an error message letting me know that Windows was unable to format the drive). Whats going on, and how do I fix it?

    Read the article

  • win 7 back up utility cant detect external drive on a netbook

    - by decoder101
    im trying to image a new HP netbook via the windows 7 BACK UP util. however, it doesnt detect the external drive, although it's seen in my computer and BIOS. i tried using HP recovery manager with recovery disc creation but it says, no burning device installed although there is one... anyone successful in using the win7 back up utility? ive been tinkering this for a while but i cant make it right using an external dvd drive. unless i'll plug in an external hdd/

    Read the article

  • Can't Remove Logical Drive/Array from HP P400

    - by Myles
    This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

    Read the article

  • Looking for definitive answer to accessing a network drive/NAS/SMB drive via Windows 7 HOME and Windows 7 Professional. Is it possible and how?

    - by Rob
    I want to be able to access my Lacie 2Big network drive in Windows 7 Explorer. I have a machine with Windows 7 Home and one with Windows 7 Professional. Neither Windows 7, home or pro, can access the drive. The Windows 7 Home machine displays the drive in its Explorer, with the capacity, but on clicking the icon, I get another window, blank with the busy pointer which does not eventually stop. The drive is working perfectly. How do I know this? Because I can access it with no problems on my Apple Mac, Windows XP home and Ubuntu machines on the same network as the Windows 7 machines. Except for the Windows XP home machine that required Lacie ethernet agent program, the Mac and the Ubuntu machines needed no setup, the drive appeared like any other drive. So my 2 questions: Is it possible to access a network share drive, e.g. a NAS like Lacie 2big in Windows 7 Home Premium and Windows 7 Professional. If so how? I read on Microsoft's own forums and elsewhere that network sharing drives, e.g. via SambaSMB is NOT possible on Windows 7 Home. Is this true? http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/e08c3500-a722-4b44-b644-64f94f63c8e5/ This question is a more comprehensive re-write of my earlier question: Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac. ...where I haven't received a solving answer, and I have tried to find a solution myself. Lacie themselves haven't offered a definitive solving answer either, but I suspect it's not just their drives but SMB/network share/NAS in general... This is utterly pathetic that Windows 7 home cannot access something as simple as a network drive, especially given that Windows XP home can. My research so far: Apparently it is possible on Windows 7 Professional, via the Local Security Policy, only on Windows 7 Professional, not Windows 7 Home: http://www.sevenforums.com/tutorials/7357-local-security-policy-editor-open.html http://answers.microsoft.com/en-us/windows/forum/windows_7-security/accessing-local-security-policy-in-windows-7-home/0c8300d0-1d23-4de0-9b37-935c01a7d17a http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/14fc5037-3386-4973-b5d8-2167272ff5ad/ http://www.tomshardware.com/forum/75-63-windows-samba-issue Another solution offered is editing the registry, doesn't look promising to me, fiddly and not guaranteed, hard to produce a complete solution I think, given that everyone's registry can vary. Registry key edit solutons: https://www.lacie.com/uk/mystuff/ticket/ticket.htm?tid=101278940 http://networksecurity.farzadbanifatemi.com/security-policy/how-to-access-local-security-policy-windows-7-home-premium Related: Does Windows 7 Home Premium support backing up to a network share Network Copy to Windows 7 File Share Fails and Kills Network Connection

    Read the article

  • Mapped network drive missing from My Computer and Explorer

    - by matt wilkie
    On a Windows XP Pro SP3 machine one network drive refuses to show up in My Computer or Explorer. The missing drive letter is G:, if that matters. Other mappings work fine. Other profiles one the same machine have no problem mapping G:. I can access the G: just fine typing it into the address bar or in CMD shell. I've used TweakUI to toggle hide/show G: with no difference. TweakUI says G: should be visible. I've logged off,on between toggles to make sure the settings are taking effect. I've looked at reg key [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer] and made sure it's zero'd. [insert ref link here] We've limped along with this broken setup for some time, just working around it, but some applications do not allow typing in a path when choosing a place to save files and it's reached the point where it's intolerable. So, anyone have any idea why XP won't show this drive letter? or how to fix it?

    Read the article

  • external drive and CentOS - Reset high speed USB device number

    - by Phil
    I have 2 external drives (3TB) and both will not work with my centOS Box. Tested them in windows ( different machine ) No problems ( 2.6.32-279.9.1.el6.i686 ) dmesg reports: usb 2-2: new high speed USB device number 3 using ehci_hcd usb 2-2: New USB device found, idVendor=2109, idProduct=0700 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: USB 3.0 SATA Bridge usb 2-2: Manufacturer: VIA Labs, Inc. usb 2-2: SerialNumber: 0000000000006121 usb 2-2: configuration #1 chosen from 1 choice scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access ST3000DM 001-9YN166 CC4B PQ: 0 ANSI: 2 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] 5860533165 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 06 00 00 sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sdd: sdd1 sd 6:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16). sd 6:0:0:0: [sdd] Assuming drive cache: write through sd 6:0:0:0: [sdd] Attached SCSI disk Tyring to use cfdisk / fdisk / gdisk or even fdisk -l results in the program hanging and dmesg reports: usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd usb 2-2: reset high speed USB device number 3 using ehci_hcd I have the same 2 drives physically installed in the computer via SATA Any Ideas?

    Read the article

  • New Seagate GoFlex external hard drive reporting temperature 50C and higher--defective or normal?

    - by rob
    I have a brand-new Seagate GoFlex hard drive, and my SMART diagnostics program (CrystalDiskInfo) is warnings me that the drive is running too hot. The lowest reported temperature I've seen it is 48C, and the highest so far is 56C (all of last week, it was at 50C). According to several sources I've found online, including a Google study, hard disks operating higher than 40C have shorter lifespans. The temperature in the room is usually about 23C (74F), and orienting the drive vertically vs. horizontally doesn't seem to affect the operating temperature. Does anyone else have a GoFlex external desktop drive that runs at 40C or cooler? Is my drive just defective, or is this high temperature common for these drives?

    Read the article

  • VMWare guest OS is not using full hard drive space

    - by syuusuke
    Hey everyone, I'm wondering if you can give me some insight on how to figure this out. I've recently virtualized a w2k3 server that had 10GB C:\ drive size. Once I finished virtualizing it, I expanded the disk to 20GB for C:\ and within guest OS (W2K3) computer management settings, you can see it recognizes as 20GB partition C:. But for some reason, if I opened windows explorer and see the properties of C:\, it will only show total size of 10GB. Does anyone know how to solve this or even had this problem before?

    Read the article

  • Proper way to connect SATA and IDE Hard drives together?

    - by Bartek
    I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

    Read the article

  • What do I need to get so I can upgrade my Thinkpad x61 Tablet hard drive?

    - by user36118
    My Thinkpad X61 Tablet is running out of space, and I would like to give it a bigger drive. I would like to clone the old drive to a bigger new drive. What do I need to get to accomplish this? The fewer things to get, the better, of course. The easier, the better. My system: Thinkpad X61 Tablet. XP w/ the latest SP. I am OK with XP, and don't want to reinstall it. No optical drive. USB 2.0 connectors (Bootable, I think). Things I have: USB 2.0 external drive housing. USB flash stick (2GB).

    Read the article

  • [MINI HOW-TO] Repair Missing External Hard Drive Database Error in WHS

    - by Mysticgeek
    If you’re using external hard drives with your Windows Home Server, they might get unplugged and create an error. Here we look at running the Repair Wizard to quickly fix the issue. If an external drive that is included in your drive pool becomes unplugged or loses power, you might see the following error under Home Network Health when opening the WHS Console. To fix the issue verify the drive has power and is plugged in correctly and click Repair. The wizard launches and you’ll need to agree that you may lose data during the repair of the backup database. In this example it was a simple problem where an external drive became unplugged from the server…so you can close out of the wizard. If you look under Server Storage you can see the drive is missing…To fix the issue verify the drive has power and is plugged in correctly. WHS will add the drive back into the pool and when finished you’ll see it listed as healthy and good to go. Using external drives that are part of your storage pool may not be the best way to have your home built WHS setup, but if you do, expect occasional errors such as this. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaSpeed up External USB Hard Drives in Windows VistaRebit Backup Software [Review]Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

  • Zero bytes on home partition

    - by Michael Z
    I decided to replace the hard drive on my machine running Ubuntu 12.04 LTS . After using the new hard drive for a few days, I noticed that the new hard drive has bad sectors. So I decided to plug my old hard drive back in. First, I plugged both hard drives in and copied some data files from the new hard drive to the old one. After unplugging the new hard drive, I booted the computer with the old hard drive, and here I got a surprise: I can see 0 bytes available on my /home partition! The df utility shows that the /home partition has 0 available bytes. I have tried to move some files. But I still has 0 bytes on /home! However, GParted correctly shows that the available size is near 2Gb. UPDATE 1: To my surprise, System Monitor shows me that approximately 2 Gb are free and 0 bytes are available on the /home partition. It's slightly shocked me! Are "free" and "available" not the same? Any help is really appreciated!

    Read the article

  • How do you limit root partition disk access to allow drive to go into stanby mode?

    - by Casey
    When there are no users on my system, I would like the hard disk to spindown to low-power state. I realize that this might not be 100% achievable for a straight 24 hours, but it seems reasonable that the system could remain idle for a few hours at a time when it is not in use. My system is headless and running a limited number of services. The primary services are: exim4, mythtv-backend, nfs, samba, cups, apt-cacher-ng Assume that drives are already enabled to go into standby mode. Also, its not acceptable to increase the write-back timeout, since my system is not on a UPS.

    Read the article

  • How do I execute a file from a FAT USB drive?

    - by Derek Redfern
    I'm trying to install a portable app onto my USB drive such that it is compatible with both Ubuntu and Windows (specifically, a program called eToys). Support is already built into the app for both operating systems - there's etoys.sh for Ubuntu and etoys.exe for Windows. I decided to install onto a FAT drive since that can be read from both systems. This works fine for Windows, but for some reason I cannot execute etoys.sh on Ubuntu. The problem is not with the file - when the whole folder is copied to the local hard drive, the app works great in Ubuntu. But when I try to execute it from the USB, it opens the file in a text editor. I then tried running it from a terminal, but I got the message "Permission denied." I've had the same problem with other executables as well. Is there an easy way to execute things from a USB stick? Thanks! -- Derek

    Read the article

  • How to install my current Ubuntu based OS on to an external drive? [closed]

    - by Godel Fishbreath
    Possible Duplicate: How do I install Ubuntu to a USB key? How to copy an Ubuntu install from one laptop to another I have found urls to install ubuntu to a HD. But my current system has been upgraded and updated so often that it does not resemble anything on the web or on my drive disks. So giving my a url to how to install ubuntu will fail. Give me instead 'how to install my current Linux/Ubuntu based system (11.04) and all the upgrades to my external HD. Or alternately how to back up the OS into a bootable external HD. I am looking for either urls or a very complete explanation.

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >