Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 32/298 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Proper Network Infastructure Setup DMZ, VPN, Routing Hardware Question

    - by NickToyota
    Greetings Server Fault Universe, So here's a quick background. Two weeks ago I started a new position as the systems administrator for an expanding health services company of just over 100 persons. The individual I was replacing left the company with little to no notice. Basically, I have inherited a network of one main HQ (where I am situated) which has existed for over 10 years, with five smaller offices (less than 20 persons). I am trying to make sense of the current setup. The network at the HQ includes: Linksys RV082 Router providing internet access for employees and site to site VPN connecting the smaller offices (using an RV042 each). We have both cable and dsl lines connected to balance traffic (however this does not work at all and is not my main concern right now). Cisco Ironport appliance. This is the main gateway for our incoming and outgoing emails. This also has an external IP and internal IP. Lotus domino in and out email servers connected to the mentioned Cisco gateway. These also have an external IP and internal IP. Two windows 2003 and 2008 boxes running as domain controllers with DNS of course. These also have both an external IP and internal IP. Website and web mail servers also on both external and internal IPs. I am still confused as why there are so many servers connected directly to the internet. I am seriously looking to redesign this setup with proper security practices in mind (my highest concern) and am in need of a proper firewall setup for the external/internal servers along with a VPN solution about 50 employees. Budget is not a concern as I have been given some flexibility to purchase necessary solutions. I have been told Cisco ASA appliance may help. Does anyone out in the Server Fault Universe have some recommendations? Thank you all in advance.

    Read the article

  • Surface (Pro) Soft Keyboard + Hardware Keyboard Issue

    - by Matt Clark
    When I got my Surface Pro 2, I loved it, and everything seemed to work flawlessly, until, wait for it, windows updates... The issue that I am having is the following, I primarily use the TC (TypeCover), as the Pro is an out-of-office laptop replacement for me, that I can still use to do whatever I need, but there are times when I will flip the cover, and use the system in tablet mode. The problem is that even when the TC is attached, any text field I click on, causes the OSK (on screen keyboard) to appear, as if I was running the system in tablet mode. As soon as I press a single button on the TC, the OSK is dismissed. When I first got the system, this was NOT the case, and it functioned as it should, where the OSK will only appear if the TC was not present. The biggest problem that I am having is the fact that the OSK causes the windows to be resized. Maximized windows will be shrunk, and stretched to their previous state, however a window that is not maximized will stay in its shrunken state, after the OSK has been dismissed. Below are pictures that show what is happening. Has anyone else experienced this issue? And is there any way to fix it? As you might imagine, having spent a pretty penny on a device like this, it it quite an annoying bug that needs fixing. I have been dealing with this issue for about 3 months now.

    Read the article

  • Linux HA - Best Heartbeat hardware solution

    - by Martino Dino
    Hi all I would ask anyone what is the best layer 2 medium for heartbeat in Linux and how it's best configured. More precisely I've been thinking about a dedicated NIC for that purpose but then i thought that if a switch breaks then i would loose the heartbeat connection for most of the cluster and STONITH 'BUM'!!! Will probably loose my job after :) Distributing the heartbeat onto the main NICs of every node trough a vif sounds reasonable but im not sure if this is the best option (at least the switches are redundant to some extent). Is it possible to use heartbeat over a bonded interface and that sounds reasonable? Do you have any other tip/solution for that issue?

    Read the article

  • RHEL 6.x on Rackspace Cloud and Dedicated hardware experiencing Redis Timeouts

    - by zhallett
    I just recently set up a mixture of RHEL 6.1 Rackspace cloud hosts and RHEL 6.2 dedicated hosts using Rackconnect. I am experiencing intermittent Redis timeouts from within our Rails 3.2.8 app with Redis 2.4.16 running on the RHEL 6.2 dedicated hosts. There is no network latency or packet loss. Also there are no errors on any interfaces on our cloud or dedicated servers or on the managed firewall from Rackspace. When Redis timesout, there is nothing logged within redis even though it is set up to do debug logging. The only error we receive is from Airbrake saying there was a Redis timeout. Network topology: RHEL 6.1 cloud hosts <--> Alert logic IDS <--> Cisco ASA 5510 <--> RHEL 6.2 dedicated hosts (web nodes) (two way NAT) (db hosts running redis) Ping from db host to web host: 64 bytes from 10.181.230.180: icmp_seq=998 ttl=64 time=0.520 ms 64 bytes from 10.181.230.180: icmp_seq=999 ttl=64 time=0.579 ms 64 bytes from 10.181.230.180: icmp_seq=1000 ttl=64 time=0.482 ms --- web1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999007ms rtt min/avg/max/mdev = 0.359/0.535/5.684/0.200 ms Ping from web host to db host: 64 bytes from 192.168.100.26: icmp_seq=998 ttl=64 time=0.544 ms 64 bytes from 192.168.100.26: icmp_seq=999 ttl=64 time=0.452 ms 64 bytes from 192.168.100.26: icmp_seq=1000 ttl=64 time=0.529 ms --- data1.xxxxxx.com ping statistics --- 1000 packets transmitted, 1000 received, 0% packet loss, time 999017ms rtt min/avg/max/mdev = 0.358/0.499/6.120/0.201 ms Redis config: daemonize yes pidfile /var/run/redis/6379/redis_6379.pid port 6379 timeout 0 loglevel debug logfile /var/lib/redis/log syslog-enabled yes syslog-ident redis-6379 syslog-facility local0 databases 16 save 900 1 save 300 10 save 60 10000 rdbcompression yes dbfilename dump-6379.rdb dir /var/lib/redis maxclients 10000 maxmemory-policy volatile-lru maxmemory-samples 3 appendfilename appendonly-6379.aof appendfsync everysec no-appendfsync-on-rewrite no auto-aof-rewrite-percentage 100 auto-aof-rewrite-min-size 64mb slowlog-log-slower-than 10000 slowlog-max-len 1024 vm-enabled no vm-swap-file /tmp/redis.swap vm-max-memory 0 vm-page-size 32 vm-pages 134217728 vm-max-threads 4 hash-max-zipmap-entries 512 hash-max-zipmap-value 64 list-max-ziplist-entries 512 list-max-ziplist-value 64 set-max-intset-entries 512 zset-max-ziplist-entries 128 zset-max-ziplist-value 64 activerehashing yes Redis-cli info: redis-cli info redis_version:2.4.16 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:64 multiplexing_api:epoll gcc_version:4.4.6 process_id:4174 uptime_in_seconds:79346 uptime_in_days:0 lru_clock:1064644 used_cpu_sys:13.08 used_cpu_user:19.81 used_cpu_sys_children:1.56 used_cpu_user_children:7.69 connected_clients:167 connected_slaves:0 client_longest_output_list:0 client_biggest_input_buf:0 blocked_clients:6 used_memory:15060312 used_memory_human:14.36M used_memory_rss:22061056 used_memory_peak:15265928 used_memory_peak_human:14.56M mem_fragmentation_ratio:1.46 mem_allocator:jemalloc-3.0.0 loading:0 aof_enabled:0 changes_since_last_save:166 bgsave_in_progress:0 last_save_time:1352823542 bgrewriteaof_in_progress:0 total_connections_received:286 total_commands_processed:507254 expired_keys:0 evicted_keys:0 keyspace_hits:1509 keyspace_misses:65167 pubsub_channels:0 pubsub_patterns:0 latest_fork_usec:690 vm_enabled:0 role:master db0:keys=6,expires=0 edit 1: add redis-cli info output

    Read the article

  • Best SQL Server Configuration with this hardware.

    - by DavidStein
    I just received my new SQL Server from Dell. The server will be serve approximately 15 OLTP databases which average 10GB in size. Here are the basic specs: Dell PowerEdge R510 with up to 12 Hot Swap HDDs,LED Intel Xeon E5649 2.53GHz, 12M Cache, 5.86 GT/s QPI, 6 core (Quantity of 2) 48GB Memory (6x8GB), 1333MHz Dual Ranked RDIMMs for 2 Processors, Optimized PERC H700 Integrated RAID Controller, 1GB NV Cache 300GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 4) 600GB 15K RPM SA SCSI 6Gbps 3.5in Hotplug Hard Drive (Quantity of 6) My first thought was to use 3 arrays. OS - Raid 1 - (2)300GB T-Log - Raid 1 (2)300GB DB - Raid 5 (5) 600GB Backup - (1) 600GB - non-raided. However, I could also do the following after purchasing one more drive for backup. OS and T-Log - Raid 10 - (4)300GB DB - Raid 10 (6)600GB The hard drive space is not an issue as the databases are not that large. I'm just trying to optimize the speed of the applications using these databases. So, what would you guys recommend?

    Read the article

  • "Safely remove hardware"...doesn't.

    - by Kev
    I have an external USB harddisk that I have scripted to safely shut down after a backup, so the backup operator can unplug it, and knows not to if the lights are still on for some reason. It's always worked fine using the DevEject command-line utility. This week it failed for some reason: DevEject 1.0 2003 c't/Matthias Withopf Ejecting 'USB Mass Storage Device' [USB\VID_0411&PID_002A\00000704C8D2]...FAILED (23,5) Error ejecting device USB Mass Storage Device, vetoed (15,5)! Worse yet, using the SRH tray icon, I click Stop, click OK, it pauses about 5 seconds with OK and Cancel greyed out, closes the sub-window, and then the main window with the Stop button still shows the device, and Stop is still available. I can keep doing that and it never gets rid of the device. I can still access it in Explorer. LockHunter reports that nothing is locking the drive. I've made no changes to the backup configuration or anything to do with the drive this week. Why the sudden flake-out? Short of a restart, which I can't do today before the backup operator goes home, how do I fix it?

    Read the article

  • Hardware and Software Working Together - What Does LJE say?

    - by Stephen Slade
     IDG News Service - Oracle CEO Larry Ellison said Oracle will continue to bet on selling high-end custom hardware for its software products, even amidst a growing trend toward roomfuls of cheap, generic servers. "You have to be in the hardware business and the software business, to get the best possible system," he said during a keynote speech at Oracle's OpenWorld conference in Tokyo. "We believe it's the right idea, we believe it's the next generation of computing, we believe all the pieces have to fit together." Ellison, as he has often done in the past, repeatedly referred to Apple as his "favorite example" of such tight integration. He was a close friend of Apple's co-founder Steve Jobs and previously served on Apple's board of directors.He said sales of Oracle's advanced servers were booming and generating around a billion dollars a year in revenue for the company, which has until recent years focused almost exclusively on its software offerings. With the explosion of popular online services and the increasing number of mobile devices that access them, demand is high for databases that can quickly respond to high numbers of relatively simple queries. While Oracle is pitching its expensive, finely-tuned machines to meet this requirement, Internet behemoths like Google, Facebook and Microsoft increasingly rely on armies of low-cost, easily replaceable servers. Ellison emphasized the high specifications of Oracle's servers, which come packed with multiple terabytes of RAM and flash-based storage for speed. Such machines are superior to large server farms, he said, because they require far less electricity and floor space, and are also cost competitive. When asked about whether purchasing such products would lock customers in to expensive hardware from Oracle, he promised that the company's software would always run on "multiple hardware sources."  Ellison, who spoke from Kyoto, Japan's ancient capital, was shown live online via webcast. The Oracle founder has a fondness for Japanese architecture and is staying in his large garden residence in the city Source: Ellison: Hardware-software integration key, Apple is best example. Oracle's founder and CEO reaffirmed his commitment to custom hardware for its software products  LINK to Computerworld article Apr 5, 2012 http://www.computerworld.com/s/article/9225858/Ellison_Hardware_software_integration_key_Apple_is_best_example?source=CTWNLE_nlt_entsoft_2012-04-09&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+computerworld%2Fs%2Ffeed%2Ftopic%2F173+%28Computerworld+Databases+News%29#disqus_thread

    Read the article

  • BIOS password and hardware clock problems

    - by Slartibartfast
    I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

    Read the article

  • Set up DPM to use hardware VSS Provider with EMC Clariion SAN

    - by Ryan
    We recently purchased an EMC Clariion AX4 SAN and we're using it to provide storage for our Hyper-V virtual machines. I've already got the servers registered with it and configured the failover cluster CSV's, etc. I'm wanting to figure out what I have to do to set up the VSS Provider for the SAN, so that Microsoft Data Protection Manager can use it to backup the virtual machines. I'm new when it comes to Clariion SAN's, so I have no idea how to set up the VSS provider. I downloaded something from Powerlink that was labeled VSS Provider and installed it on one of the machines connected to the SAN. It had something to do with a Solutions Enabler (I don't know what that is), but it doesn't really seem like it did anything. I read something that suggested I'd need to have Navisphere Manager to use the VSS Provider on the AX4, but we didn't purchase that - we're just using Navisphere Express. Can anyone help me figure out how to get the VSS Provider up and running?

    Read the article

  • Booting a Windows 7 installation on different hardware

    - by tomfanning
    I'm in a situation where I could do with very quickly migrating a Windows 7 (RTM x64) installation from one machine to another. What options are open to me in terms of getting W7 to boot after the drive is picked up and moved from one box to another? I thought it was supposed to be a little less sensitive to this kind of move than XP, but it doesn't work - it is stuck in a reboot loop and never reaches a GUI. Tried a few things so far, none of which have worked: Changed SATA mode in the BIOS of the target machine between ATA and AHCI run Windows 7 Startup Repair tried safe mode, no change (I will keep this list up to date as suggestions come in) UPDATE: I can confirm this reboot loop is due to STOP error 0x0000007B, and these codes follow: 0xFFFFF880009A98E8 0xFFFFFFFFC0000034 0x0000000000000000 0x0000000000000000 UPDATE: I didn't get anywhere on this and I ended up just rebuilding the machine. I think it should be theoretically possible, so I'm going to leave the question open in case someone comes along in future with an answer.

    Read the article

  • Citrix XenDesktop create an image to work across multiple hardware devices

    - by JohnyV
    I have created an image using this guide http://support.citrix.com/article/CTX119877. However this only works for virtual and the model that I made the image on how can i extend compatibility to another device? I am just using it for a vdisk that I can then also use as a virtual device but I wasnt the vdisk to be available over multiple devices. Using Win 7 on the client. Thanks

    Read the article

  • Postfix not sending/allowing receiving of messages after server (hardware) changed

    - by 537mfb
    We had na old notebook runing Ubuntu 12.04 working as a web/ftp/mail server and it worked but since the notebook was a notebook and pretty old and unreliable, a desktop was bought to replace it before it stopped working all together. Due to issues with the new desktop's vídeo card, we couldn't use Ubuntu 12.04 so we installed Ubuntu 13.10 and wen't about configuring it. Since we removed the notebook from the network, we kept the same Computer Name and local IP address to make things as close to the old server as possible configuration-wise. However, something has gone wrong since Postfix is throwing error 451 4.3.0 lookup faillure on every attempt to send a mail, and no email can be received either. Our main.cf file is a copy of the one we were using (and working) on the old server (notice we use EHCP) # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name powered by Easy Hosting Control Panel (ehcp) on Ubuntu, www.ehcp.net biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no myhostname = m21-traducoes.com.pt relayhost = mydestination = localhost, 89.152.248.139 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 89.152.248.0/24 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtp_use_tls = yes smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes debug_peer_list = sender_canonical_maps = debug_peer_level = 1 proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $mynetworks $virtual_mailbox_limit_maps $transport_maps alias_maps = hash:/etc/aliases smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtpd_destination_concurrency_limit = 2 smtpd_destination_rate_delay = 1s smtpd_extra_recipient_limit = 10 disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 This configuration was working before but now everytime i try to send a mail in squirrelmail it reports: Message not sent. Server replied: Requested action aborted: error in processing 451 4.3.0 <[email protected]>: Temporary lookup failure And i can't send mail to it from outsider either. Any ideas? EDIT: Here are some issues MXToolBox reports to my domain, answering hopefully to @Teun Vink: BlackList Mail Server Web Server DNS Error 4 0 2 0 Warnings 0 0 0 3 Passed 0 6 3 12 So the domain is on some blacklist, but that doesn't explain the error at all No mail server issues found (except it's not working) Those two web server errors it's because i don't have HTTPS workin (No SSL Certificate) so the test fails Those 3 DNS warnings we're already there when it was working with the other machine and are related to stuff i can't control: SOA Refresh Value is outside of the recommended range SOA Expire Value out of recommended range SOA NXDOMAIN Value too high I've searched and as far as i can tell only the guys who sold the retail can change those values and they won't. Edit2: I half solved the issue.on the new machine postfix was installed but postfix-mysql waasn't so he couldn't connect to the database (rookie mistake). After fixing that, i can now send mails to the outsider without any issues, however i am still not able to receive mails from utside. The sender doesn't get any message warning about the non-delivery but the message doesn't fall in the inbox and the log shows: Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: NOQUEUE: reject: RCPT from re lay4.ptmail.sapo.pt[212.55.154.24]: 451 4.3.5 <relay4.ptmail.sapo.pt[212.55.154. 24]>: Client host rejected: Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<sapo.pt> Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: disconnect from relay4.ptmail .sapo.pt[212.55.154.24]

    Read the article

  • Best linux USB DVB-T hardware

    - by Roalt
    What is the best supported USB-based DVB-T (free-to-air) tuner for Linux? I've seen a similar question, but this one is PCI-based, not USB: http://superuser.com/questions/104663 I've tried the Conceptronic CTVDIGRCU v3.0 but it does not pick up any channels (although it does work on windows).

    Read the article

  • Network connection keeps dropping - bad hardware?

    - by Bill Sambrone
    Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

    Read the article

  • Hardware RAID 0 without OS re-installation

    - by sterz
    I have Ubuntu & Windows 7 installed on my hdd. Can I mirror the image of the hdd to the second identical drive? Is this not recommended (i.e have to re-install every OS)? If it is okay to mirror, is there anything else to do to make hw RAID 0 work? Does RAID 0 have the same risk as a single drive? What sector size would you recommend for read/write/extract video files (mostly each around 2 GB)?

    Read the article

  • Hardware imposed 32-bit limit

    - by knittl
    i'm thinking about converting my OS (ubuntu) to the 64 bit version to use the last bit of memory (4 gb)—ok, it's rather reinstalling … will this work as expected or are there possible limits given by the mainboard/memory controller/some other component, so i cannot fully utilize my full ram? if so, are there benefits from upgrading anyway?

    Read the article

  • The best way to hide data Encryption,Connection,Hardware

    - by Tico Raaphorst
    So to say, if i have a VPS which i own now, and i wanted to make the most secure and stable system that i can make. How would i do that? Just to try: I installed debian 7 with LVM Encryption via installation: You get the 2 partitions a /boot and a encrypted partition. When booting you will be prompted to fill in the password to unlock the encryption of the encrypted partition, Which then will have more partitions like /home /usr and swapspace which will automatically mount. Now, i do need to fill in the password over a VNC-SSL connection via the control panel website of the VPS hoster, so they can see my disk encryption password if they wanted to, they have the option if they wanted to look at what i have as data right? Data encryption on VPS , Is it possible to have a 100% secure virtual private server? So lets say i have my server and it is sitting well locked next to me, with the following examples covered bios (you have to replace bios) raid (you have to unlock raid-config) disk (you have to unlock disk encryption) filelike-zip-tar (files are stored in encrypted archives) which are in some other crypted file mounted as partition (archives mounted as partitions) all on the same system So it will be slow but it would be extremely difficult to crack the encryption. So to say if you stole the server. Then i only need to make the connection like ssh safer with single use passwords, block all incoming and outgoing connections but give one "exception" for myself. And maybe one for if i somehow lose my identity for the "exeption" What other overkill but realistic security options are available, i have heard about SElinux?

    Read the article

  • Buying a new PC with fast hardware features

    - by Hooshkar
    I am web designer/developer, and I design and code "Premium Wordpress Themes" and HTML Websites. I wish to buy a new PC system with fast features, and will be installing virtual machines too. What kind of PC system would be best for a professional web designer/developer. Tell me the PC specs, e.g processor, motherboard, how much hard drive, RAM, graphic card etc. Don't really care about the price.

    Read the article

  • Hardware imposed 32-bit limit

    - by knittl
    i'm thinking about converting my OS (ubuntu) to the 64 bit version to use the last bit of memory (4 gb)—ok, it's rather reinstalling … will this work as expected or are there possible limits given by the mainboard/memory controller/some other component, so i cannot fully utilize my full ram? if so, are there benefits from upgrading anyway?

    Read the article

  • Why does this article state that graduate education liberate one from concerns like the efficiency of hardware-based integers?

    - by kadaj
    Quoting The Evolution of Haskell Programmer, graduate education tends to liberate one from petty concerns about, e.g., the efficiency of hardware-based integers What exactly does this suggest? Is it that after graduation, one gets more interested in abstract ideas so much that he does not think hardware is relevant? Or that hardware is also abstracted and one is more interested in algorithms? I am trying to understand on what grounds the sentence is based.

    Read the article

  • Hardware for Capturing Packets

    - by Kevin
    One of my clients is a small school district in Texas. Like any school, they often have problems with network'd peripherals such as printers, et al. It would be nice to be able to simply "listen" to what the printer and PC are saying to each other (or not saying more importantly)... The problem is that I can't find old-style "hubs" anymore, and even if I could, it's not a long-term solution. All of the devices that I have found to replicate the purpose of a simple hub are either $100+ or are difficult to throw into a networking tool kit (aka my backpack)... Now that hubs are dead, what's the new low-cost standard for simple packet capture in the networking world?

    Read the article

  • Hardware Mediaplayer display

    - by Eric Audio
    I'm looking for a keyboard or just a little display to attach on my keyboard or something like that, what will show me the music tracks i'm playing in windowsmedia player, itunes, etc. I did some research and the only thing I found are gaming keyboards, but i'm not shure if these show my music tracks. So my question: Does somebody knows a keyboard who show the music tracks or just a little display? Bye, Eric

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >