Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 37/298 | < Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >

  • How to recover from a drive failure in a RAID 5 configuration?

    - by Philip Fourie
    This morning a drive failed on our database server. The drive array (3 disks) is setup in a RAID 5 configuration. While we wait for a drive replacement we are preparing for a recovery strategy. Users are continuing to work on the system, albeit very slowly (don't know why??). How does one install the new drive - will the data for this drive automatically be rebuilt from the parity or is there another process we should follow? Edit: This is a hardware RAID controller. (Thanks for the answers so far, appreciated)

    Read the article

  • Are mobo raid controllers based on Intel ICH10R southbridge still considered software Raid?

    - by Breadtruck
    So do you still need specific software/drivers (intel matrix?) installed to manage the raid controller, setup the array. If the raid chipset is on-board the motherboard and it uses the CPU, and say I am using a Core 2 Quad Q9550, would a hardware based card still out perform the motherboard chipset? This is for a home workstation and I could spend $300 on a areca ARC-1210 PCI-Express x8 SATA II but I want to be able to justify the money for the raid card. My motherboard is a GIGABYTE GA-EP45-UD3P UPDATE: I was going to RAID5 using 4 500 GB drives, and I was going to buy a controller card but this article got me thinking hmmm....Toms-Southbridge Battle

    Read the article

  • How can I recover [data from] my failing USB key?

    - by moe37x3
    I have a Corsair Flash Voyager USB key, and it's almost completely failed. When I plug it into my [WinXP] computer, the OS mounts it and open up explorer to the drive's root directory. However, if I try to copy any data off, I get an error message saying that the device is not there. If I leave it plugged in, the OS seems to oscillate between seeing it and not seeing it, since the "Safely Remove Hardware" tray icon appears and disappears every few seconds. The damage was probably caused by my abuse, either from plugging it in with my keys hanging off of it or from losing the cap and keeping it in my pocket uncapped. Is there anything I can do to save the data from it or even rehabilitate the drive?

    Read the article

  • Internal LTO tape drive becomes hot

    - by claasz
    We use an internal LTO3 tape drive (HP Ultrium 920) in a PC (no particular server hardware) running Linux. The tape drive becomes quite hot - I don't have the exact temperature, but you may touch it for a second or two, then it hurts ;-) This happens when the tape has nothing to do (during reading/writing, it might become even hotter, I haven't checked that). Besides that, the system is working fine. Now I'm wondering Why does the tape becomes so hot? Is this something I need to care about? Is there something like a 'standby' mode for the tape? (I think it should not consume that much energy when it is not used)

    Read the article

  • OpenGL support no longer available

    - by Aznfin
    I've been using OpenGL hardware acceleration in programs such as Adobe Photoshop CS4 and Adobe After Effects CS4. I've noticed that recently the options for OpenGL previews are disabled because my graphics card seems to not support OpenGL. But that doesn't make any sense whatsoever. I know for a fact that my graphics card does have support for OpenGL and it worked before. I checked for driver updates just the other day. Anybody know what's going on? Info: Operating System: Windows 7 Home Premium 64-bit GPU: ATI Radeon HD 3200 Driver Packaging Version: 8.69-091211a-094296C-ATI Catalyst™ Version: 09.12 Provider: ATI Technologies Inc. 2D Driver Version: 8.01.01.994 2D Driver File Path: /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS /{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 Direct3D Version: 8.14.10.0723 OpenGL Version: 6.14.10.9252 Catalyst™ Control Center Version: 2009.1211.1547.28237

    Read the article

  • Micro sound breaks/interrupts on Windows 7

    - by cand
    Hello all, I've been experiencing strange behavior recently. When listening to mp3 or watching movie or whatever that uses sound, I get micro breaks in sound. It's like it hangs or cuts a fragment for about 0.5s. When I start OS, it's ok, but as time passes it gets worse, to the extent that music is unlistenable being interrupted every 2 seconds. I haven't found any relevance between this behavior and hardware usage, I don't think it's directly related to HDD (or it might be but with significant delay). I have updated soundcard drivers and it didn't help a lot. My system is Windows 7, computer is simple HP laptop, nx7300-Ru374ES with WD Caviar Scorpio Blue hard drive inside and integrated soundcard on it (I can check the model later if it's important). Did anybody encounter such problem ? Maybe it's a common thing on Windows 7 or someone knows how to solve it? Thanks in advance.

    Read the article

  • Network connection through a wall

    - by BCS
    I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

    Read the article

  • Computer is really slow

    - by joshhunt
    I'm not exactly sure when exactly it started happening, but my computer now is extremely slow. Originally, I have been using this computer for all sorts of stuff: Photoshop, web design/development, movies and even some light (Warcraft 3) gaming. I have been running it with Windows XP But now it is very, very slow, and I don't know how, why or when this happened. After I noticed the slowness, I removed Windows XP and installed Windows 7 on it, but it is still very slow. Now watching videos is unbearable at full screen (slow frame rates, audio out of sync) and painful when made smaller. Why would this happen? What would cause this? I am starting to think it is a hardware problem (the CPU has died or something), but I don't even know if that is possible. The PC is running with 1GB of RAM, three hard drives (all up, something like 400 GB) and I think a 1.6GHz processor

    Read the article

  • Error: "The drive is not ready for use; its door may be open."

    - by TimTim
    On Windows Vista SP2 - I'm attempting to upgrade to Windows 7. After I put in the Windows 7 DVD in the drive, I receive the Windows 7 upgrade splash screen (so the drive is working at this moment). But then when I click "Upgrade to Windows 7", I receive a error message stating: Error: The drive is not ready for use; its door may be open Any ideas what's causing this error? Since receiving the error, I have already replaced the DVD drive with a brand new one and still receive the same error. I've also checked Device Manager and no hardware is reporting problems (no cautions or failures).

    Read the article

  • How to estimate a server specifications for this particular system? [on hold]

    - by Alvaro Fallas
    I'm working in a college project and I'm supposed to specify the server's hardware to hold a system. The system is some kind of social network. And it is supposed to hold around 100 000 users the first year, also the system must be able to handle 1000 users working at the same time. It is the first time I'm asked to do something like this, so I hope you can give me a hand and help me because I feel a little lost. The system's data base is Mysql. I found some server configurations offered by Amazon Web Services, but I don't know which of them is the better for my system due to lack of experience Hope you can help me.

    Read the article

  • Reliability of S.M.A.R.T.?

    - by Mark
    I've been using ActiveSmart to monitor my hard-drives health for a few weeks now, and its telling me my brand new 1.5 TB hard-drive is half-dead already. About on-par with one of my hard-drives which I know is at least half dead because I've been having some read errors and heard ticking noises. Now I haven't actually noticed any problems with my 1.5 TB drive; should I be concerned that it's going to crap out on me too? Or could ActiveSmart be giving a mis-diagnosis because I use it a lot or something (I've used up 795 GB in the 2 and a half weeks I've had it). The events that ActiveSmart has been catching is "Hardware ECC recovered". Maybe these new fangled super big hard-drives somehow rely on ECCs to squeeze out the extra space, but this isn't actually a cause for concern?

    Read the article

  • Fuzzy Sound / Crackling

    - by Walter White
    Whenever I play music through my headphones on my laptop, I get a little bit of fuzz or cracking that is noticeable at lower volumes. When I listen through my phone, the sound is much clearer, both when music is playing and nothing is playing. The noise is more noticeable with my Sennheiser 280 PRO headphones than with earbuds. Is there anything I can do to improve audio playback on my laptop? I am surprised that the audio quality is better on my phone than my laptop which should have better hardware.

    Read the article

  • Choosing A Power Supply [closed]

    - by Geeks On Hugs
    Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • Unable to boot Ubuntu 64-bit in Virtualbox on Mac OS X

    - by Aamir
    I have latest generation Macbook Pro 7.1 (Intel Core 2 Duo) running Mac OS X 10.6.6. I installed Virtuabox 4.0.2 and tried to boot Ubuntu 10.10 64-bit iso. The boot options screen from the live CD came up: However when I continued to load the live session, or installer for that matter, I encountered the following error: This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropriate for your CPU. I am not sure if VT-x is enabled or is supported in the Core 2 Duo of my Macbook Pro. But at least, I have both I/O APIC and VT-x enabled for hardware virtualization as told in the Virtualbox manual.

    Read the article

  • PC is randomly shutting off

    - by Bobby
    I have a PC which is randomly shutting off (the hard way, like someone pulled the plug). It's no heat problem, because this can happen after 2 minutes of operation or after 4 hours and I checked the temperature. It's also no problem of the operation system, because it will also do that while in BIOS. If it happens once, you can be sure that it will happen within the next hour another two or three times, and then it works again for over a week or even longer. Possible causes I've thought about so far are: Voltage Fluctuation Loose contact (already replugged all cables within the PC, no luck) Faulty PSU Maybe someone has more ideas to this? P.s.: I don't have the hardware specs with me right now, I'll post them as soon as I get them.

    Read the article

  • Drivers and Codec Compilations

    - by Pennf0lio
    Hi, Do you know any software or compilations that you recommend to handle drivers and codecs for newly formated computer? I am having problem gathering drivers and codecs when I format my computer or other's computer because we frequently misplace it's original drivers. I need an offline solution that doesn't need internet. Same for as the codec, when formating computer we frequently lost our codecs, are there codec packs you know that you would like to recommend? P.s. I had tried driver bot but it's only good when your online, I'm looking for a complete package that has all the driver to most common hardware (eg. Monitor, Sound, etc). Thanks!

    Read the article

  • Minimum Requirements for (open) Solaris?

    - by Electrons_Ahoy
    I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

    Read the article

  • Can you suggest some DIY PC specs for 1) Value, and 2) Future 'upgradability'?

    - by user17381
    Hi, I'm considering building a new desktop PC from components. For the last 7/8 or so years I have almost exlusively used laptops, and so have fallen behind a bit with knowledge of various hardware technologies. Anyway, now I'm considering building a new desktop machine. Mainly for development work, but also would be nice to do a bit of gaming. The two main criteria are: I would like the first build to be relatively low cost. I would like to select components that will allow me to upgrade in the future without throwing too much away. Can anyone recommend a setup? Thanks

    Read the article

  • SCSI driver installation trouble

    - by Vicky
    I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

    Read the article

  • HD read error while booting linux

    - by sidharth sharma
    I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

    Read the article

  • My WD passport detected but not shown on my computer

    - by Rakesh Patel
    1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

    Read the article

  • Network Server Cabinets - How does the ventilation work?

    - by Nicholas
    Recently I've been looking at a range of network server cabinets with a mesh door at the rear. At the top of the cabinet are ceiling mounted fans with dust filters attached. These fans suck air out of the cabinet - presumably to remove the hot air that has risen to the top. My question is why do these fans have dust filters? What point do they serve? If the air flow is pulled in by these fans through the mesh door, then surely they are not there to protect the hardware inside from dust? Also, there are other minor grilled gaps around the enclosure, how does this kind of ventilation design work?

    Read the article

  • How OS comunicates with HW?

    - by Jack
    Hi, how can program runnig on CPU (mostly OS) acess other PC hardware? Such as Graphic card, HDD and so? From what I read, In DOS, this was done using BIOS calls, specifically INT instruction. But, int instruction should only jump to the certain space in RAM. So, how can some program stored in RAM acess other computer HW, when CPU can acess only RAM, and reeive interrupts? And, does windows use int instructions as well, or is there any new way to communicate with HW? Thanks.

    Read the article

  • Unable to create a Windows 7 system image of a failing hard drive

    - by Rahul
    The hard disk of my one year old T400 Thinkpad has started failing periodic hardware tests. I get a "Targeted Read Test Failed" error. The "SMART short self test" times out. I am now trying to create a Windows 7 System image of the hard disk but it fails without giving any specific error messages. I tried using Comodo Backup but got an error (code 101117) there as well. I have copied the important files in Dropbox but would like to take a full System backup as I have plenty of software installed on the machine. Does anyone know why this is happening and how I can take a backup of the system image ?

    Read the article

< Previous Page | 33 34 35 36 37 38 39 40 41 42 43 44  | Next Page >