Search Results

Search found 33182 results on 1328 pages for 'linux port'.

Page 32/1328 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Ethernet port sleeping on PS3 running linux

  - by Doug

  My lab has a PS3 running Ubuntu Linux 9.04 Server Edition. After a period of a few hours with no use, the Ethernet connection (eth0) seems to go to sleep, causing the connection to be lost. Pinging or trying to SSH into the machine results in no response. The fix I've been using is to access the machine locally and restart it (trying to bring eth0 down then up doesn't seem to correct it). I've tried setting up an hourly cron job that runs on the PS3 and pings another machine just to create network activity, but this doesn't seem to solve the problem either. Update: The solution was to run the above cron job much more frequently: every 10 minutes works.

  Read the article

• Squid configuration for proxy server

  - by Ian Rob

  I have a server with 10 ip's that I want to give access to some friends via authentication but I'm stuck on squid's config file. Let's say I have these ip's available on my server: 212.77.23.10 212.77.1.10 68.44.82.112 And I want to allocate each one of them to a different user like so: 212.77.23.10 goes to user manilodisan using password 123456 212.77.1.10 goes to user manilodisan1 using password 123456 68.44.82.112 goes to user manilodisan2 using password 123456 I managed to add the passwords and authentication works ok but how do I do to restrict one user to one of the available ip's? I have a basic setup from different bits I found over the internet but nothing seems to work. Here's my squid.conf (all comments are removed to make it lighter): acl ip1 myip 212.77.23.10 acl ip2 myip 212.77.1.10 tcp_outgoing_address 212.77.23.10 ip1 tcp_outgoing_address 212.77.1.10 ip2 http_port 8888 visible_hostname weezie auth_param basic program /usr/lib/squid/ncsa_auth /etc/squid/squid-passwd acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access deny all icp_access allow all hierarchy_stoplist cgi-bin ? access_log /var/log/squid/access.log squid acl QUERY urlpath_regex cgi-bin \? cache deny QUERY refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT hosts_file /etc/hosts forwarded_for off coredump_dir /var/spool/squid

  Read the article

• management network to a network port for additional ones munin and monit

  - by paolo

  management network to a network port for additional ones munin and monit I want to build a separate Netzwek for server management. I have several network cards a linux / debian / ubuntu with computer. Set both network cards sin in the /etc/network/interfaces. # The primary network interface #allow-hotplug eth0 #iface eth0 inet dhcp auto eth0 iface eth0 inet static address 10.0.0.240 netmast 255.255.255.0 network 10.0.0.0 brodacast 10.0.0.255 gateway 10.0.0.254 auto eth1 iface eth1 inet static address 10.0.10.240 netmast 255.255.255.0 network 10.0.10.0 brodacast 10.0.10.255 post-up ip route add 10.0.0.0/24 dev eth0 src 10.0.0.240 table eth0-WAN post-up ip route add default via 10.0.0.254 table eth0-WAN post-up ip route add 10.0.10.0/24 dev eth1 src 10.0.10.240 table eth1-LAN post-up ip route add default via 10.0.10.200 table eth1-LAN post-up ip rule add from 10.0.0.240 table eth0-WAN post-up ip rule add from 10.0.10.240 table eth1-LAN still i adjusted / etc/iproute2/rt_tables and following routes set up in the /etc/network/interfaces I want to have both applications and the network interface separately as munin and monit only on eth1 and not have to eth0. it goes to the reboot but sometimes not always. # Traceroute-i eth1 10.0.10.200 not go what am I doing wrong?

  Read the article

• No sound out of headphone port

  - by Thanatos

  I cannot get sound out of the headphone port. Headphones are plugged in, and sound comes out of the internal speakers. Windows behaves normally (sound switches to headphones when headphones are inserted). It did work in Linux at one point, but something changed, we're just not sure what. Rebooting doesn't fix. This appears to occur whether or not PulseAudio is running. Things I've tried: Rebooting. No effect. Booting into Windows. It works properly, so probably not a hardware issue. All of alsamixer. My only controls are this: "Master" Volume bar & mutable, unmuted. Controls volume. "PCM" Volume bar only. 100%. "S/PDIF" Mutable only, currently muted, has no effect. "S/PDIF" Default PCM", Mutable only, currently unmuted, has no effect. Killing PulseAudio. No effect. (It also won't stay dead! Something appears to be restarting it, and I can't tell what, but it is annoying as fuck.) alsactl init 0, no effect. sudo rm -f /var/lib/alsa/asound.state, no effect. General system info: Ubuntu 10.04 LTS Toshiba Satellite T135D-S1324 lspci says I have: 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller

  Read the article

• Serial Port Data Structure

  - by Seth Archer

  I need to send data to a hardware device over serial port. I'm using a program called serial port tool for os x. After I connect to the device there is a form box where I can type data to send. I have no idea how to format the data. Here is an excerpt from the manual for the device. "The Net Manager Command structure consists of one start byte, one command byte, five bytes of data, and a one byte checksum. Each message packet is formatted as follows:" an example command is: Byte0=30 Byte1=7 Byte2=5 Byte3=1 Byte4=2 Byte5=0 Byte6=245 How do I type that into the form box in serial port tool? Thanks, Seth

  Read the article

• Accessing Bluetooth virtual COM port on Windows without manual pairing

  - by oo_olo_oo

  I need to connect to a Bluetooth device through virtual COM port created in Windows. It's easy when the port has been already created during manual pairing procedure. But I would like my application to relieve an user from the manual pairing of a device. I would like to present all devices in the range, allow user to chose one, and then create virtual COM port connected with the selected device. I'm not trying to avoid the pairing procedure itself, but rather I would like to invoke it by my application. I started getting familiar with Microsoft Bluetooth API. And then some doubts arose. I've been wondering what happen if some user would use different (than Microsoft's) Bluetooth stack? Is the Microsoft's API the real Bluetooth API, which have to be implemented by any other Bluetooth stack provider? Or rather each provider has its own API, and the Microsoft's is only one of many other?

  Read the article

• System.UnauthorizedAccessException from Serial Port in VB.NET

  - by psuhas

  I am using VB.NET 2008 Express Edition to access Serial Port which is a USB to Serial port. Since this is removable, the app user can disconnect it at any time in app. I am getting an unhandled exception when I remove the USB Serial Port. After research, it seems like a known problem in .NET (even in 3.5) I am looking for some solution to get this done. I have already tried the app.config solution that was suggested and it does not work Here is the link for issue http://connect.microsoft.com/VisualStudio/feedback/Validation.aspx?FeedbackID=140018

  Read the article

• Can I prevent a Linux user space pthread yielding in critical code?

  - by KermitG

  I am working on an user space app for an embedded Linux project using the 2.6.24.3 kernel. My app passes data between two file nodes by creating 2 pthreads that each sleep until a asynchronous IO operation completes at which point it wakes and runs a completion handler. The completion handlers need to keep track of how many transfers are pending and maintain a handful of linked lists that one thread will add to and the other will remove. // sleep here until events arrive or time out expires for(;;) { no_of_events = io_getevents(ctx, 1, num_events, events, &timeout); // Process each aio event that has completed or thrown an error for (i=0; i<no_of_events; i++) { // Get pointer to completion handler io_complete = (io_callback_t) events[i].data; // Get pointer to data object iocb = (struct iocb *) events[i].obj; // Call completion handler and pass it the data object io_complete(ctx, iocb, events[i].res, events[i].res2); } } My question is this... Is there a simple way I can prevent the currently active thread from yielding whilst it runs the completion handler rather than going down the mutex/spin lock route? Or failing that can Linux be configured to prevent yielding a pthread when a mutex/spin lock is held?

  Read the article

• Binding on a port with netpipes/netcat

  - by mindas

  I am trying to write a simple bash script that is listening on a port and responding with a trivial HTTP response. My specific issue is that I am not sure if the port is available and in case of bind failure I fall back to next port until bind succeeds. So far to me the easiest way to achieve this was something like: for (( i=$PORT_BASE; i < $(($PORT_BASE+$PORT_RANGE)); i++ )) do if [ $DEBUG -eq 1 ] ; then echo trying to bind on $i fi /usr/bin/faucet $i --out --daemon echo test 2>/dev/null if [ $? -eq 0 ] ; then #success? port=$i if [ $DEBUG -eq 1 ] ; then echo "bound on port $port" fi break fi done Here I am using faucet from netpipes Ubuntu package. The problem with this is that if I simply print "test" to the output, curl complains about non-standard HTTP response (error code 18). That's fair enough as I don't print HTTP-compatible response. If I replace echo test with echo -ne "HTTP/1.0 200 OK\r\n\r\ntest", curl still complains: user@server:$ faucet 10020 --out --daemon echo -ne "HTTP/1.0 200 OK\r\n\r\ntest" ... user@client:$ curl ip.of.the.server:10020 curl: (56) Failure when receiving data from the peer I think the problem lies in how faucet is printing the response and handling the connection. For example if I do the server side in netcat, curl works fine: user@server:$ echo -ne "HTTP/1.0 200 OK\r\n\r\ntest\r\n" | nc -l 10020 ... user@client:$ curl ip.of.the.server:10020 test user@client:$ I would be more than happy to replace faucet with netcat in my main script, but the problem is that I want to spawn independent server process to be able to run client from the same base shell. faucet has a very handy --daemon parameter as it forks to background and I can use $? (exit status code) to check if bind succeeded. If I was to use netcat for a similar purpose, I would have to fork it using & and $? would not work. Does anybody know why faucet isn't responding correctly in this particular case and/or can suggest a solution to this problem. I am not married neither to faucet nor netcat but would like the solution to be implemented using bash or it's utilities (as opposed to write something in yet another scripting language, such as Perl or Python).

  Read the article

• Default http/admin port in dropwizard project

  - by mithrandir

  I have a dropwizard project and I have maintained a config.yml file at the ROOT of the project (basically at the same level as pom.xml). Here I have specified the HTTP port to be used as follows: http: port:9090 adminPort:9091 I have the following code in my TestService.java file public class TestService extends Service<TestConfiguration> { @Override public void initialize(Bootstrap<TestConfiguration> bootstrap) { bootstrap.setName("test"); } @Override public void run(TestConfiguration config, Environment env) throws Exception { // initialize some resources here.. } public static void main(String[] args) throws Exception { new TestService().run(new String[] { "server" }); } } I expect the config.yml file to be used to determine the HTTP port. However the app always seems to start with the default ports 8080 and 8081. Also note that I am running this from eclipse. Any insights as to what am I doing wrong here ?

  Read the article

• L2TP iptables port forward

  - by The_cobra666

  Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

  Read the article

• Heartbeat (Linux HA) and NetApp?

  - by Drew

  Does anyone have any experience setting up a high availability two node Linux cluster using heartbeat (linux-ha.org) and NetApp storage (preferably using SnapDrive for Linux)? Basically I would like to mount the same NetApp LUN over Fibre Channel to two servers in an Active/Passive mode (only one server can access the LUN at a time) Thanks!

  Read the article

• FFMPEG Install on EC2 - Amazon Linux

  - by Oliver Holmberg

  Hello Serverfault friends, I am about two days into attempting to install FFMPEG with dependencies on an AWS EC2 instance running the Amazon Linux AMI. I've installed FFMPEG on Ubuntu and Fedora systems with no problems in the past, and have read reportedly successful instructions on installing on Red Hat/Fedora. I have followed a number of tutorials and forum articles to do so, but have had no luck yet. As far as I can tell, the main problems are as followed: The amazon linux (Most similar to red-hat/centos) yum repositories don't have ffmpeg available. I have found instructions to update the repositories to include the required packages, but adding these repositories cause yum to fail in updating packages. (Also, I've read some cautionary tales about adding redhat/centos repositories to amazon linux that lead me to believe it may be a bad idea) (https://forums.aws.amazon.com/thread.jspa?messageID=229166) I have tried a more complicated method of downloading the source tarball, compiling, and installing, but this always fails due to missing dependencies and other errors. On to my question: Has anyone successfully installed FFMPEG on Amazon Linux? Is there a fundamental incompatibility? If anyone could share specific instructions on installing ffmpeg on amazon linux I would be greatly appreciative. Any other insights/experiences would also be appreciated. Thanks in advance, Oliver

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• Best book for learning linux shell scripting?

  - by chakrit

  I normally works on Windows machines but on some occasions I do switch to development on linux. And my most recent project will be written entirely on a certain linix platforms (not the standard Apache/MySQL/PHP setup). So I thought it would pay to learn to write some linux automation script now. I can get around the system, start/stop services, compile/install stuffs fine. Those are probably basic drills for a programmer. But if, for example, I wanted to deploy a certain application automatically to a newly minted linux machine every month I'd love to know how to do it. So if I wanted to learn serious linux shell scripting, what book should I be reading? Thanks

  Read the article

• Linux installation analysis

  - by blunders

  "Ending company IT Admin relationship" has a good checklist for taking over an existing IT system, but I'm wondering as it relates to Linux: What is the most effective way to assess the scope of existing custom configurations, installs, scripts, etc done? Is there any software that will check if the kernel, system files, etc mirror the default files for the version installed? At this point I don't know what distro of Linux the server (though using Netcraft I do know the server appears to be Linux) -- so it's possible without knowing that information that this would be a hard question to answer.

  Read the article

• how to configure MTA (Mail Transfer Agent) on Red hat linux 4

  - by lepricon123

  how to configure MTA (Mail Transfer Agent) on Red hat linux 4

  Read the article

• How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

  - by Ian

  I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

  Read the article

• Windows CA to issue certificate to authenticate SSH to a Linux server

  - by BArnold

  I have a Windows Server Root Certificate Authority, Linux SSH server, and users with Windows SSH clients. The Linux box is not part of the AD domain (and probably never will be [sigh]) OpenSSH 5.4 and above supports X.509 certiicate based authentication. I am trying to find a way to use my Windows Certificate Authority to issue certificates for authentication of the users when the SSH to the Linux box. I do not want to have to generate a keypair on each user's desktop. And we want the certificates controlled and revokable at the Windows CA. My question is not exactly the same as SSH from Windows to Linux with AD certificates (and the referenced moelinux.net seems to be down) I have searched Google a lot, and haven't found much results about how to accomplish this. An answer doesn't necessarily have to include a full tutorial, even some hints about what to search on or pointers to some references may be helpful.

  Read the article

• Gre Tunnel Cisco Linux traffic forwarding

  - by mezgani

  I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

  Read the article

• Setting up Samba shares on a Linux VPS

  - by 101265052760541259879

  Hi, I'm trying to set up a folder that can be accessed via Windows clients over the net on my Linux VPS on which our companies website resides. I know a little bit about Linux, and have used Samba before to browse Windows shares from a Linux laptop. I'm guessing it's possible to do the reverse - to share a folder from Linux TO a Windows client. I have root SSH access to the VPS, would anyknow know what steps I need to take to set up the share, and how I can secure it, ideally with a simple username/password so the Windows clients can connect easily? Many thanks, Jack

  Read the article

• SQL Server on Linux

  - by TimothyAWiseman

  For a particular project that is coming up, I am trying to expand my knowledge of Linux, so I am going to set up a Linux system at home. Rather than dual booting, I am thinking about putting SQL Server on a Windows Virtual Machine with Linux as the host at least until this project is over when I will probably switch back to Linux. So, I have a couple of different, but interrelated questions: How well does this work? This is only a test machine at home, so I can easily accept a fair bit of degradation, but if it is going to be a horrible reduction in performance I will dual boot instead. Is there a particular virtual machine manager I should look at to go this route? Since this is my personal machine, price is an issue but I am quite happy to pay a reasonable amount. And finally, given the choice of VMM, is there a particular Linux Distro I should be looking at? [This has been cross posted at Ask.SqlServerCentral.com . I think it may be appropriate at both sites. ]

  Read the article

• How do I recover from a Linux CentOS 4.6 Operating System Crash

  - by Greg Omebije

  Our x86 Linux server running CentOS4.6 has crashed. The machine boots only to the Grub prompt. We have tried using the "rescue mode" to recover the System, but it hasn't worked. How can we fix this problem, so that the machine boots normally? How can we fix this problem to the point were we can recover our files from the server Our Linux Server Configuration: Dell PowerEdge 1950 Intel Xeon 2 HDD (146GB each) 4GB RAM Hardware and Software raid setup CentOS 4.6 We used Sysrecord to boot the computer: the following are the output of fdisk -l Disk /dev/sda: 293.3 GB, 292326211584 255 heads, 63 sectors/track, 35539 Cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000080 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 17769 142625070 8e Linux LVM

  Read the article

• Running Montavista Linux kernel 2.6.21 on XEN

  - by Josh

  I've been assigned the task of getting our MontaVista Linux (2.6.21 kernel) running on Xen. We'll be running Xen in -hvm- mode. My Xen version is 3.4.0 (linux kernel 2.6.18) and am unable to run MontaVista Linux (kernel 2.6.21) in hvm mode. Does anyone have suggestions?

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >