Search Results

Search found 4051 results on 163 pages for 'reset placeholder'.

Page 32/163 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Internet Pings but Does Not Load

    - by t3techcom18
    From what I've been seeing and been doing my research for the past two days, many people have been having the same issues throughout the years, however, this is the first time I've encountered this issue and many of the specific workarounds or fixes have not worked for me. I've been trying to work through this for 24 hours straight now, but to no avail so many thanks to those that can help. On Monday night, got home from work; surfing the internet for half an hour, everything was fine as always. Just after half an hour, my Internet got very sluggish and then it died completely. I thought it might have been the an update I just put through in terms of Windows Update that said was a critical update for MSE, as the same thing happened a few years ago. I did a System Restore to two different dates that were in the past two weeks, nothing. Uninstalled MSE and disabled Windows Defender and the Windows Firewall: Nothing. Reset IE Options, Reset Winsock, Dumping DNS, many of the other command prompt screens to reset items: Nothing. Reset the modem: Nothing. What DID work, however, was a ping test to Yahoo. The ping test worked, saying all four packets was recieved, yet nothing else popped up. LAN and CenturyLink said everything worked on their end and that everything was connected properly, as well as the speeds working fine. CenturyLink said in their notes that they thought Port 80 was blocked. I went and put in the Firewall to allow Port 80 but it didn't make any difference whatsoever. I remembered I had a spare modem laying around and I switched them up, both modem and the cords - nothing. I then hooked it up to my netbook to see if that would work, as it usually does - connection didn't work there either. Like I said, it's been about 24 hours now and this is increasingly frustrating, as I've tried all solutions (While browsing through 10 search results pages on my phone) suggested and still nothing. Any suggestions and tricks would be greatly appreciated! Here's my specs: Windows 7 32-bit Home Premium Intel Core 2 Duo 3.14 Ghz 4 GB Kingston DDR2 RAM eVGA nForce 750i SLI eVGA GeForce GTX 560 Ti FPB ISP: CenturyLink No router Modem: CenturyLink 660 Series Hardwired connection PLEASE NOTE: This is the only computer I have (Like I said, the netbook solution didn't work), so downloading programs and such is not an option til I get to other computers somewhere else, like right now. Unless someone knows of a way of copying/pasting a file in Windows and then transferring said info to an Android smartphone, this is gunna take a while haha. Patience is requested.

    Read the article

  • Possible to see % uploaded when uploading a file using a form?

    - by quantumpotato
    I'm attempting to submit my iPhone app to iTunesConnect. The pictures loaded fine, and I picked "submit binary later" because iTunesConnect kept having the connection reset. I'm using Firefox to upload the binary. Is there any way I can see the % or data transferred of a specific file uploading, in real time? It would be great to see that the bits haven't moved in a while and manually reload the page instead of waiting for the connection to reset. Cheers

    Read the article

  • Javascript, AJAX, Extend PHP Session Timeout, Bank Timeout

    - by Guhan Iyer
    Greetings, I have the following JS code: var reloadTimer = function (options) { var seconds = options.seconds || 0, logoutURL = options.logoutURL, message = options.message; this.start = function () { setTimeout(function (){ if ( confirm(message) ) { // RESET TIMER HERE $.get("renewSession.php"); } else { window.location.href = logoutURL; } }, seconds * 1000); } return this; }; And I would like to have the timer reset where I have the comment for RESET TIMER HERE. I have tried a few different things to no avail. Also the code calling this block is the following: var timer = reloadTimer({ seconds:20, logoutURL: 'logout.php', message:'Do you want to stay logged in?'}); timer.start(); The code may look familiar as I found it on SO :-) Thanks!

    Read the article

  • Seam reRender component in partial

    - by meed2000
    Hello, I'm using seam to develop a simple web app. Using a4j commandButton in many places, with the property reRender="componentName" componentName is in most places a a4j outputPanel Which always worked, until I used a template. with include of two different views. reRender applied to the whole view does work, but reRender applied to an inner component does not. Same issue with page rules, all action I had defined are not functioning any more. Is this a problem with Seam, did someone experience this? <a4j:outputPanel id="panel1"> <h:form> <div class="section"> // whatever code </div> <a4j:commandButton id="button1" value="Add" action="#{bean1.action()}" reRender="panel1"/> <h:commandButton id="reset" value="Reset" action="#{bean1.reset}"/> </h:form> </a4j:outputPanel>

    Read the article

  • How to mock/stub calls to message taglib in Grails controller

    - by Dave
    I've got a Grails controller which relies on the message taglib to resolve an i18n message: class TokenController { def passwordReset = { def token = DatedToken.findById(params.id); if (!isValidToken(token, params)) { flash.message = message(code: "forgotPassword.reset.invalidToken") redirect controller: 'forgotPassword', action: 'index' return } render view:'/forgotPassword/reset', model: [token: token.token] } } I've written a unit test for the controller: class TokenControllerTests extends ControllerUnitTestCase { void testPasswordResetInvalidTokenRedirect() { controller.passwordReset() assert... } } Since the message taglib is called in the controller I get a MissingMethodException: groovy.lang.MissingMethodException: No signature of method: TokenController.message() is applicable for argument types: (java.util.LinkedHashMap) values: [[code:forgotPassword.reset.invalidToken]] Does anyone know the best way to get around this issue in a unit test? Ideally I would like to perform assertions on the message but right now I'd be happy if the test just ran! Thanks

    Read the article

  • What happens when you click a button using WebRat under cucumber

    - by Peter Tillemans
    I am trying to login to a Java web application. The login page has the following html : <html> <head><title>Login Page</title></head> <body onload='document.f.j_username.focus();'> <h3>Login with Username and Password</h3> <form name='f' action='/ui/j_spring_security_check' method='POST'> <table> <tr><td>User:</td><td><input type='text' name='j_username' value=''></td></tr> <tr><td>Password:</td><td><input type='password' name='j_password'/></td></tr> <tr> <td><input type='checkbox' name='_spring_security_remember_me'/> </td> <td>Remember me on this computer.</td> </tr> <tr><td colspan='2'><input name="submit" type="submit"/></td></tr> <tr><td colspan='2'><input name="reset" type="reset"/></td></tr> </table> </form> </body> </html> I use the following script: Given /^I am logged in as (.*) with password (.*)$/ do | user, password | visit "http://localhost:8080/ui" click_link "Projects" puts "Response Body:" puts response.body assert_contain "User:" fill_in "j_username", :with => user fill_in "j_password", :with => password puts "Response Body:" puts response.body click_button puts "Response Body:" puts response.body end This gives the following in the log file : [INFO] Response Body: [INFO] <html><head><title>Login Page</title></head><body onload='document.f.j_username.focus();'> [INFO] <h3>Login with Username and Password</h3><form name='f' action='/ui/j_spring_security_check' method='POST'> [INFO] <table> [INFO] <tr><td>User:</td><td><input type='text' name='j_username' value=''></td></tr> [INFO] <tr><td>Password:</td><td><input type='password' name='j_password'/></td></tr> [INFO] <tr><td><input type='checkbox' name='_spring_security_remember_me'/></td><td>Remember me on this computer.</td></tr> [INFO] <tr><td colspan='2'><input name="submit" type="submit"/></td></tr> [INFO] <tr><td colspan='2'><input name="reset" type="reset"/></td></tr> [INFO] </table> [INFO] </form></body></html> [INFO] Response Body: [INFO] <html><head><title>Login Page</title></head><body onload='document.f.j_username.focus();'> [INFO] <h3>Login with Username and Password</h3><form name='f' action='/ui/j_spring_security_check' method='POST'> [INFO] <table> [INFO] <tr><td>User:</td><td><input type='text' name='j_username' value=''></td></tr> [INFO] <tr><td>Password:</td><td><input type='password' name='j_password'/></td></tr> [INFO] <tr><td><input type='checkbox' name='_spring_security_remember_me'/></td><td>Remember me on this computer.</td></tr> [INFO] <tr><td colspan='2'><input name="submit" type="submit"/></td></tr> [INFO] <tr><td colspan='2'><input name="reset" type="reset"/></td></tr> [INFO] </table> [INFO] </form></body></html> [INFO] Response Body: [INFO] [INFO] Given I am logged in as pti with password ptipti # features/step_definitions/authentication_tests.rb:2 So apparently the response.body disappeared after clicking the submit button. I can see from the server log files that the script does not arrive on the Project page. I am new to webrat and quite new to ruby and I am now thoroughly confused. I have no idea why the response.body is gone. I have no idea where I am. I speculated that I had to wait for the page request, but all documentation says that webrat nicely waits till all redirects, pageloads, etc are finished. (At least I think I read that). Besides I find no method to wait for the page in the webrat API. Can someone give some tips on how to proceed with debugging this?

    Read the article

  • Behaviour of System.Timer when Interval property changed

    - by lowlyintern
    I have a System.Timer setup to trigger an event every day at 2AM. If the process the timer starts fails then I want the timer to be reset to run every 15 minutes until the process completes succesfully. // this is how the timer is set up. // this is working correctly. double startTime = milliseconds_of_hour_to_start. Timer = new System.Timers.Timer( startTime); Here is the code to reset the timer on success or failure of the event handler. NOTE the timer is not being stopped, just the Interval property is being reset. if (ProcessSuccess) { Timer.Interval = TimeSpan.FromHours(24).TotalMilliseconds; } else { Timer.Interval = TimeSpan.FromMinutes(15).TotalMilliseconds; } My question is this, if the process fails say 4 times, then succeeds will the Timer now be running at around 3AM? i.e. after failing will the original start time of 2AM be advanced by 15 minutes?

    Read the article

  • jquery element click event only allowed once? confuddled

    - by claw
    One a click event of an element, it only works once. Say the value is 2 it will increase/decrease/reset only once. How to I reset the event so the user can keep clicking on the element increasing the value of the value .item-selection-amount $('.item-selection-amount').click(function(event) { var amount = $(this).val(); switch (event.which) { case 1: //set new value + $(this).val(amount + 1); break; case 2: //set new value reset $(this).val(0); break; case 3: //set new value - if(amount > 0){ $(this).val(amount - 1); } break; } }); Thanks

    Read the article

  • Seam reRender component in partial; reRender across naming containers

    - by meed2000
    Hello, I'm using seam to develop a simple web app. Using a4j commandButton in many places, with the property reRender="componentName" componentName is in most places a a4j outputPanel Which always worked, until I used a template. with include of two different views. reRender applied to the whole view does work, but reRender applied to an inner component does not. Same issue with page rules, all action I had defined are not functioning any more. Is this a problem with Seam, did someone experience this? <a4j:outputPanel id="panel1"> <h:form> <div class="section"> // whatever code </div> <a4j:commandButton id="button1" value="Add" action="#{bean1.action()}" reRender="panel1"/> <h:commandButton id="reset" value="Reset" action="#{bean1.reset}"/> </h:form> </a4j:outputPanel>

    Read the article

  • Zend Framework headLink() helper and HTML5

    - by Richard Knop
    I have set doctype to HTML 5 like this: $view->doctype('HTML5'); Then I have added a stylesheet like this: $view->headLink()->appendStylesheet($view->baseUrl().'/css/reset.css'); It produces link tag like this: <link href="/css/reset.css" media="screen" rel="stylesheet" type="text/css" > But for HTML 5 this would be correct, no? <link rel="stylesheet" href="/css/reset.css"> One more question. How to produce meta tag like this with headMeta() helper? <meta charset="utf-8">

    Read the article

  • AddHandler not working?

    - by EdenMachine
    I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

    Read the article

  • Problem using Flot charts on a jQtouch web site

    - by hairbymaurice
    Hiiii I have a jQtouch site in dev and i would like to use a chart on it, to me Flot looks like the best way to do this (prettiest!) However if i implement flot on the site i get the following error: Invalid dimensions for plot, width = 0, height = 0 If i comment out the style sheet ../jqtouch/jqtouch.min.css the flot chart works just fine. This i think has something to do with the fact that you cannot use flot inside a div that has display:none From the Flot readme Blockquote Make sure that the placeholder isn't within something with a display:none CSS property - in that case, Flot has trouble measuring label dimensions which results in garbled looks and might have trouble measuring the placeholder dimensions which is fatal (it'll throw an exception). Does anyone now if i can work around this/fix this so flot and jQtouch work together? Thanks Hairby

    Read the article

  • jQuery UI sortable('cancel') - this.helper is null

    - by Kerry
    I am trying to disable a sortable element from sorting when it has been double clicked. When I try to disable it, even without a condition, it gives me the error 'this.helper is null'. $('.roundedBox:first', division).sortable({ start: function( event, ui ) { if( true === true ) { $(this).sortable('cancel'); } $(this).parent().data( 'sorting', true ); }, stop: function() { $(this).parent().data( 'sorting', false ); }, items: '.department', update: function() {}, placeholder: 'department-placeholder' }) Any ideas on how I can do this? I don't need it to be this method. Literally anything thing that stops it will work. The problem is, sorting starts on a single click, but I have another action bound to double click. If it's double clicked, I don't want it to drag.

    Read the article

  • ModalPopup CodeBehind Function Wait For User Response

    - by Snave
    I have set up a function which returns an enum of the button that the user clicked in the ModalPopup. I have a variable of type enum to store which button the user clicks in the button click event. In this function, I call the ModalPopupExtender's Show() method. My problem is, the function finishes out and returns the default enum (which is "none" since no button was clicked yet) before the ModalPopup can be shown and store which button the user clicks. So without changing the function to a method and using a different way to store the user's button click, how can I pause the function after the Show() method of the MPE has been called and wait for the user to click a button? Edit(11/20/2009): Clarification: On the aspx page, I include a ScriptManager, PlaceHolder, and an asp:Button with a codebehind click event. What I want is to click the button, then in the click event handler, I want to call a custom static class function that returns a variable. One of the arguments it takes is the PlaceHolder. The function creates all the necessary controls in the PlaceHolder needed to display a ModalPopup. It calls the created ModalPopupExtender's Show() method. What should happen: At this point is the ModalPopup gets displayed, the user clicks a button, that button's event handler fires, the button sets a variable indicating that it was clicked, it then calls the ModalPopupExtender's .Hide() method, and then the function returns the variable that indicates which button was clicked. We then return to the event handler from the original button that was clicked and the programmer can then perform some logic based on what variable was returned. Crux: When the ModalPopupExtender's .Show() method gets called, it does not display the ModalPopup until AFTER the function returns a default variable (because no button was clicked yet) and after the event handler from the original button that was clicked ends. What I need: After the ModalPopupExtender's .Show() method is called, I need the ModalPopup to get displayed immediately and I need the function to wait for a button click to be made from the ModalPopup. My thoughts: Some PostBack needs to be made to the page telling it to update and display the ModalPopup Panel. Then maybe a while loop can be run in the function that waits for a button to be clicked in the ModalPopup.

    Read the article

  • 13.10 - Black borders, black terminal

    - by Eric
    I've just upgraded to Ubuntu 13.10 and I'm seeing a strange behaviour. All windows I open have a black, boxy border, including popups, as you can see in the provided image. (The black box in the bottom right is a terminal, which fails to display any text. However, I can enter commands and they execute.) I followed the steps in this post: How do I reset my Unity configuration? to reset Unity using the unity-tweak-tool. Although helpful, that did not fix the issue. I'm thinking this may be a graphics card driver issue. Any help is much appreciated.

    Read the article

  • Slide Creation Checklist

    - by Daniel Moth
    PowerPoint is a great tool for conference (large audience) presentations, which is the context for the advice below. The #1 thing to keep in mind when you create slides (at least for conference sessions), is that they are there to help you remember what you were going to say (the flow and key messages) and for the audience to get a visual reminder of the key points. Slides are not there for the audience to read what you are going to say anyway. If they were, what is the point of you being there? Slides are not holders for complete sentences (unless you are quoting) – use Microsoft Word for that purpose either as a physical handout or as a URL link that you share with the audience. When you dry run your presentation, if you find yourself reading the bullets on your slide, you have missed the point. You have a message to deliver that can be done regardless of your slides – remember that. The focus of your audience should be on you, not the screen. Based on that premise, I have created a checklist that I go over before I start a new deck and also once I think my slides are ready. Turn AutoFit OFF. I cannot stress this enough. For each slide, explicitly pick a slide layout. In my presentations, I only use one Title Slide, Section Header per demo slide, and for the rest of my slides one of the three: Title and Content, Title Only, Blank. Most people that are newbies to PowerPoint, get whatever default layout the New Slide creates for them and then start deleting and adding placeholders to that. You can do better than that (and you'll be glad you did if you also follow item #11 below). Every slide must have an image. Remove all punctuation (e.g. periods, commas) other than exclamation points and question marks (! ?). Don't use color or other formatting (e.g. italics, bold) for text on the slide. Check your animations. Avoid animations that hide elements that were on the slide (instead use a new slide and transition). Ensure that animations that bring new elements in, bring them into white space instead of over other existing elements. A good test is to print the slide and see that it still makes sense even without the animation. Print the deck in black and white choosing the "6 slides per page" option. Can I still read each slide without losing any information? If the answer is "no", go back and fix the slides so the answer becomes "yes". Don't have more than 3 bullet levels/indents. In other words: you type some text on the slide, hit 'Enter', hit 'Tab', type some more text and repeat at most one final time that sequence. Ideally your outer bullets have only level of sub-bullets (i.e. one level of indentation beneath them). Don't have more than 3-5 outer bullets per slide. Space them evenly horizontally, e.g. with blank lines in between. Don't wrap. For each bullet on all slides check: does the text for that bullet wrap to a second line? If it does, change the wording so it doesn't. Or create a terser bullet and make the original long text a sub-bullet of that one (thus decreasing the font size, but still being consistent) and have no wrapping. Use the same consistent fonts (i.e. Font Face, Font Size etc) throughout the deck for each level of bullet. In other words, don't deviate form the PowerPoint template you chose (or that was chosen for you). Go on each slide and hit 'Reset'. 'Reset' is a button on the 'Home' tab of the ribbon or you can find the 'Reset Slide' menu when you right click on a slide on the left 'Slides' list. If your slides can survive doing that without you "fixing" things after the Reset action, you are golden! For each slide ask yourself: if I had to replace this slide with a single sentence that conveys the key message, what would that sentence be? This exercise leads you to merge slides (where the key message is split) or split a slide into many, if there were too many key messages on the slide in the first place. It can also lead you to redesign a slide so the text on it really is just explanation or evidence for the key message you are trying to convey. Get the length right. Is the length of this deck suitable for the time you have been given to present? If not, cut content! It is far better to deliver less in a relaxed, polished engaging, memorable way than to deliver in great haste more content. As a rule of thumb, multiply 2 minutes by the number of slides you have, add the time you need for each demo and check if that add to more than the time you have allotted. If it does, start cutting content – we've all been there and it has to be done. As always, rules and guidelines are there to be bent and even broken some times. Start with the above and on a slide-by-slide basis decide which rules you want to bend. That is smarter than throwing all the rules out from the start, right? Comments about this post welcome at the original blog.

    Read the article

  • Understanding Windows 8 Recovery options

    - by stuffe
    Background: I am preparing a PC that I am sending to a relative abroad, who has little or no internet access, and next to no sensible options for getting IT support should anything go wrong. As such I am trying to provide a full set of recovery options such that they are able to reinstall the OS with minimum fuss or assistance if required. The PC is a brand new Acer laptop that came with Windows 7 pre-installed (and an associated recovery partition) and a free upgrade to Windows 8. I have installed Windows 8 from scratch performing a format and clean install from media I burned from the official download. The existing Windows 7 recovery partition is still there, and I can still boot from it. I have created recovery DVDs of that in case it is ever lost. Here are my recovery options so far. I can perform a factory reset of Win 7 via the recovery partition I can perform a factory reset of Win 7 via burned recovery DVDs I can re-install Windows 8 cleanly from a DVD All of these are useful, but not what I want, because the first 2 methods use Win 7, and still fill the machine with crapware, and the latter doesn't provide for any post-install customisation and software installation. So, I am looking to see what other options are available to perform a Windows 8 recovery that will be more than a simple install. I am aware that Win8 comes with some useful refresh tools: Refresh your PC - Re-install Win 8 over the top of your existing installation, recovering from any Windows corruption etc. I can run this from my current install, although it says some files are missing that will be provided by me install or recovery media, which seems to be code for stick your install DVD in, and it starts after I do that - unfortunately for this particular laptop you need to specify a particular WIFI driver or the install bombs out part way through with IRQL errors, and this refresh method skips the part where you can load a driver, so it's no use to me. I think I can fix this by creating a custom recovery image using the recimg.exe command but it takes hours to complete so I haven't tried it yet. Reset your PC - Perform a full install and lose all your files. Again it needs my Install media inserting before it will do anything, but then it provides an error (will include later when I recreate it...) Now, these recovery options look useful (in principal, although both are fail for me) but they rely on having a working system to access the tools, which leads me to the last option, of making a Recovery USB drive. I have made a recovery drive, and it should perform loads of useful things, including copying my WIN7 recovery partition to the drive, providing the above refresh and reset options, providing other troubleshooting options and also the ability to restore from a custom image, only none of them seem to work for me. Creating the Recovery Drive - the option to include my recovery partition is greyed out. The partition exists and works fine, why will it not copy it? Refresh - I imagine this would have the same issues as I described before, but this is moot because when I try it says that the "drive where Windows is installed is locked, please unlock the drive and try again" with no info on what that means and how to do it. Restore - Again, probably pointless as I can just use the DVD, but it also errors: "unable to reset your PC. A required drive partition is missing" System Restore - should let me roll back a bad driver etc as per normal in Windows, only it simply says "To use system restore you must specify which windows installation to restore. Restart this computer, select an operating system, and select system restore" ?!?! System Image Recovery - this seems to be offering to restore from a Windows system image, but this is deprecated in Windows 8, although you can still make one if you use the Windows 7 Backup tools, however the resultant file is too large to put on the USB stick as it's FAT formatted, and would be a massive stack of DVDs anyway. So useless. It would be nice it it would work with the custom recovery image you can use with the refresh command, but there seems no option to do this. Automatic Repair - some diagnostics, which seem useless as it happily tells me it can't fix my problem, even though I have none. Command Prompt - yay, this works! What on earth do I want to use it for... Had any of the above worked, it might be useful, but as any form of install still requires you to have the DVD, and any form of custom recovery image also requires you to have either a massive stack of DVDs or an NTFS formatted backup device in addition to the recovery drive, it sort of ruins the point. It doesn't seem rocket science. I want to create a bootable USB drive that I can refresh Windows over an existing install with, perform a clean reinstall to a bare system, or recovery a customised image with existing apps installed. If anyone can point me in a direction that allows me to make a single recovery drive do these all these things, I would appreciate it. I have a 32Gb USB3 thumb drive that I bought for this very purpose, but it's seems to be fighting to let me do anything useful. At this rate I will be making a DriveImageXML recovery stick and dumping the OS with that, which I know works, but isn't so elegant as using the proper tools..

    Read the article

  • AT91SAM7X512's SPI peripheral gets disabled on write to SPI_TDR

    - by Dor
    My AT91SAM7X512's SPI peripheral gets disabled on the X time (X varies) that I write to SPI_TDR. As a result, the processor hangs on the while loop that checks the TDRE flag in SPI_SR. This while loop is located in the function SPI_Write() that belongs to the software package/library provided by ATMEL. The problem occurs arbitrarily - sometimes everything works OK and sometimes it fails on repeated attempts (attemp = downloading the same binary to the MCU and running the program). Configurations are (defined in the order of writing): SPI_MR: MSTR = 1 PS = 0 PCSDEC = 0 PCS = 0111 DLYBCS = 0 SPI_CSR[3]: CPOL = 0 NCPHA = 1 CSAAT = 0 BITS = 0000 SCBR = 20 DLYBS = 0 DLYBCT = 0 SPI_CR: SPIEN = 1 After setting the configurations, the code verifies that the SPI is enabled, by checking the SPIENS flag. I perform a transmission of bytes as follows: const short int dataSize = 5; // Filling array with random data unsigned char data[dataSize] = {0xA5, 0x34, 0x12, 0x00, 0xFF}; short int i = 0; volatile unsigned short dummyRead; SetCS3(); // NPCS3 == PIOA15 while(i-- < dataSize) { mySPI_Write(data[i]); while((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TXEMPTY) == 0); dummyRead = SPI_Read(); // SPI_Read() from Atmel's library } ClearCS3(); /**********************************/ void mySPI_Write(unsigned char data) { while ((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TXEMPTY) == 0); AT91C_BASE_SPI0->SPI_TDR = data; while ((AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_TDRE) == 0); // <-- This is where // the processor hangs, because that the SPI peripheral is disabled // (SPIENS equals 0), which makes TDRE equal to 0 forever. } Questions: What's causing the SPI peripheral to become disabled on the write to SPI_TDR? Should I un-comment the line in SPI_Write() that reads the SPI_RDR register? Means, the 4th line in the following code: (The 4th line is originally marked as a comment) void SPI_Write(AT91S_SPI *spi, unsigned int npcs, unsigned short data) { // Discard contents of RDR register //volatile unsigned int discard = spi->SPI_RDR; /* Send data */ while ((spi->SPI_SR & AT91C_SPI_TXEMPTY) == 0); spi->SPI_TDR = data | SPI_PCS(npcs); while ((spi->SPI_SR & AT91C_SPI_TDRE) == 0); } Is there something wrong with the code above that transmits 5 bytes of data? Please note: The NPCS line num. 3 is a GPIO line (means, in PIO mode), and is not controlled by the SPI controller. I'm controlling this line by myself in the code, by de/asserting the ChipSelect#3 (NPCS3) pin when needed. The reason that I'm doing so is because that problems occurred while trying to let the SPI controller to control this pin. I didn't reset the SPI peripheral twice, because that the errata tells to reset it twice only if I perform a reset - which I don't do. Quoting the errata: If a software reset (SWRST in the SPI Control Register) is performed, the SPI may not work properly (the clock is enabled before the chip select.) Problem Fix/Workaround The SPI Control Register field, SWRST (Software Reset) needs to be written twice to be cor- rectly set. I noticed that sometimes, if I put a delay before the write to the SPI_TDR register (in SPI_Write()), then the code works perfectly and the communications succeeds. Useful links: AT91SAM7X Series Preliminary.pdf ATMEL software package/library spi.c from Atmel's library spi.h from Atmel's library An example of initializing the SPI and performing a transfer of 5 bytes is highly appreciated and helpful.

    Read the article

  • Java 7 update 6 installation fails on Windows 7 when Chrome is default browser

    - by ali1234
    I am configuring a brand new Lenovo U410 system with Windows 7 Home Premium for a user. I received the system direct from the shop. As part of the configuration I installed Java using the online installer. This worked correctly. Later, due to a mistake I made, I needed to restore the system to factory default. The factory default FORMATS C:\ and puts back (supposedly) the exact factory configuration. However, after doing this, I was no longer able to install Java successfully using the same method I used before. Now, whenever I attempt to use the online Java installer, the following happens. First of all, a window always appears "Welcome to Java", "Downloading Java Installer...". After short time this window disappears and then one of three things happens: The very first time I do this after doing a factory reset, I get a Windows error report, which contains this information: Application Name: JavaSetup7u5.exe Application Version: 7.0.50.6 Application Timestamp: 4feacd84 Fault Module Name: JavaIC.dll Fault Module Version: 9.9.9.9 Fault Module Timestamp: 4f2343d6 Exception Offset: 000052cb Exception Code: c0000417 Exception Data: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 773c Additional Information 2: 773cd78cf06816f8246f359fa270f3bb Additional Information 3: f51a Additional Information 4: f51aaea7d22f36fa9e3a626b5a5cd1c3 2. Subsequent runs produce either this error message: "Error: Java(TM) installer - Downloaded file C:\Users\\AppData\Local\Temp\fx-runtime.exe is corrupt." or Nothing happens at all. I Believe this is a red herring. Running the installer again causes a different error because the files were downloaded and the installer crashed before it could clean up. This isn't the actual problem, as when this happens the installer deletes the downloaded files, and then when you run it for the third time, it downloads everything again and does the javaic.dll crash. I suspect the downloader is appending to the existing files or something, causing the corruption. I have tried all of the above as Administrator and as a normal user. I have tried reseting the system to factory defaults several times. I have tried downloading with Chrome and Internet Explorer 9. I have tried uninstalling all anti-virus software and disabling the windows firewall entirely. The only thing which makes a difference is running the installer in Windows XP compatibility mode, which allows the installation to complete. I know I can workaround this error by using the offline installer so please don't post that as an answer. I am looking for an explanation of the root cause. Additionally, if I use the offline installer, the updater does not work. The updater also does not work if I install in XP mode. The updater fails because it works by just downloading the newest online setup and running it. Also remember that the installers are digitally signed. The signitures verify correctly so there is no way in hell that this is caused by corrupted downloads. Some theories I have: The Java setup files on java.com actually changed in between the first successful install and my later attempts. Seems unlikely as none of the version numbers have changed. However, I have seen a couple of reports of this error which showed up in the past 24 hours. This looks like the most likely explanation right now: http://www.oracle.com/us/corporate/press/1735645 - Oracle released 7 update 6 two days ago. Careful inspection of the installers reveal that they are in fact attempting to download .6, not .5 as the download page claims. Not actually correct. Only the update tool tries to install 7u6. The online installer still tries 7u5. However, 7u6 being released two days ago is too much of a coincidence to ignore. Update: The 7u6 online installer is available from Oracle technetwork. It crashes in exactly the same way. The factory reset software uses GMT-8 and I am on GMT-1. As a result, after factory reset, any software which cares to check would think that the system was restored 7 hours in the future, due to Window's awful policy of storing local time in the system clock. This could be confusing a certificate check or similar. Update: I discovered that this does cause Windows Update to fail. The workaround, setting the clock back before starting factory reset, does not enable Java to install correctly. The factory reset image isn't really the same as what is installed in the main partition when you buy the system. Naughty Lenovo. The installer appears to crash while installing or displaying something to do with the Ask.com toolbar. That seems to be what javaic.dll does. Microsoft Tuesday was the 14th. Some update in that could be causing this. However, I'm factory reseting the machine every time, so unless the patches get slipstreamed into the recovery image, or there is some mechanism by which they get silently installed even if updates are disabled, then I don't see how this can be the cause. Major breakthrough: The default browser on Lenovo systems is Google Chrome. I noticed that the JavaIC.dll "sponsor check" actually does a check on your default browser in order to decide which sponsor ad to display. Normally that would get you the Ask toolbar on IE9. But that toolbar doesn't work on Chrome, and so the installer tries to display a different ad. The different ad is what causes the crash. Changing the default browser to IE9 allows the installer to run correctly. So this looks like a genuine bug in the sponsor ad code in the installer, caused by a combination of Google Chrome default browser and not being in the US. (Installer also checks your location using IP geolocation service and displays different ads based on that.)

    Read the article

  • E160 ubuntu 12.04 can't detect the modem

    - by Matt
    i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

    Read the article

  • How do I clear xmodmap settings?

    - by Wayne Werner
    Exactly what the title asks. How do I clear xmodmap settings? I have an IBM model M, and somehow xkeycaps got it into its head that my "End" key was not any key at all. xev reports keypresses when I use it, so I know the event is being generated by the keyboard. Also, xkeycaps thinks that my arrow keys are all wonky, and apparently the scrollbar is broken so it only scrolls down - so I can't scroll up to find an IBM keyboard that just maybe is close to my map so I can fix my keys. So I'm trying to reset my keyboard to the default settings, but the xmodmap manpage is woefully devoid of "reset all" or "clear all" or anything of that nature (that I was able to find). Help would be greatly appreciated!

    Read the article

  • Compiz stop working

    - by Aikanáro
    I'm on a laptop sony vaio, vng-nw330f with ubuntu 11.10. One day I used my computer normally, I shutdown and the other day when I turn on it again, all was different. Compiz effects is not working at all, it doesn't matter what plugin (from ccsm) i enable or disable, nothings happens, nothings changes. I tried next commands: unity --reset unity --reset-icons sudo rm -rf .config .gnome .gnome2 .gnome2_private .compiz .icons .fonts .nautilus .themes .qt .local (from my home directory) gconftool-2 --recursive-unset /apps/compiz-1 I try reinstalling compiz (I remove compiz from software center and installed it again). I have just a couple of weeks using ubuntu, I'm not sure if exist a desktop call it unity 3d, but I think that it's missing. I want the graphics interface of ubuntu 11.10 by default.

    Read the article

  • LWJGL - Continuous key press event without delay

    - by Zarkopafilis
    I am checking for key presses and then based on the keys pressed I am moving a square around the screen. I am setting booleans for the keys WASD. But , Whenever I try to keep the key down , it takes a while till it moves continuously (Just a half second stop after a single move.) Any way to get rid of that and make it be "smooth"? Code: up = false; down = false; left = false; right = false; reset = false; while(Keyboard.next()){ if (Keyboard.getEventKeyState()) { if(Keyboard.isKeyDown(Keyboard.KEY_SPACE)){ reset = false; } if(Keyboard.isKeyDown(Keyboard.KEY_W)){ up = true; } if(Keyboard.isKeyDown(Keyboard.KEY_S)){ down = true; } if(Keyboard.isKeyDown(Keyboard.KEY_A)){ left = true; } if(Keyboard.isKeyDown(Keyboard.KEY_D)){ right = true; } } }

    Read the article

  • File manager respawns with ubuntuone

    - by pygator
    Starting Feb 11, my Ubuntu 10.10 desktop respawns FileManager many times(hundreds). You can observe the "Starting File Manager" processes at the bottom of the gnome desktop. I can make this behaviour stop by: System - Preferences - Ubuntu One - Services - uncheck "Files". Can someone walk me though the debug process? Linux 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux I'm trying to reset the Ubuntu One configuration. I found good information here: https://wiki.ubuntu.com/UbuntuOne/Bugs Look for "ROOT_MISMATCH in syncdaemon.log" After running through the steps to reset and restart UbuntuOne, no more "Starting File Mangager" respawns.

    Read the article

  • Javascript code inside updatepanel usercontrol.

    - by Ed Woodcock
    Ok: I've got an updatepanel on an aspx page that contains a single Placeholder. Inside this placeholder I'm appending one of a selection of usercontrols depending on certain external conditions (this is a configuration page). In each of these usercontrols there is a bindUcEvents() javascript function that binds the various jQuery and javascript events to buttons and validators inside the usercontrol. The issue I'm having is that the usercontrol's javascript is not being recognised. Normally, javascript inside an updatepanel is executed when the updatepanel posts back, however none of this code can be found by the page (I've tried running the function manually via firebug's console, but it tells me it cannot find the function). Does anyone have any suggestions? Cheers, Ed. EDIT: cut down (but functional) example: Markup: <script src="/js/jquery-1.3.2.min.js"></script> <form id="form1" runat="server"> <div> <asp:ScriptManager ID="Script" runat="server" /> <asp:Button ID="Postback" runat="server" Text="Populate" OnClick="PopulatePlaceholder" /> <asp:UpdatePanel ID="UpdateMe" runat="server"> <Triggers> <asp:AsyncPostBackTrigger ControlID="Postback" EventName="Click" /> </Triggers> <ContentTemplate> <asp:Literal ID="Code" runat="server" /> <asp:PlaceHolder ID="PlaceMe" runat="server" /> </ContentTemplate> </asp:UpdatePanel> </div> </form> C#: protected void PopulatePlaceholder(object sender, EventArgs e) { Button button = new Button(); button.ID = "Push"; button.Text = "push"; button.OnClientClick = "javascript:return false;"; Code.Text = "<script type=\"text/javascript\"> function bindEvents() { $('#" + button.ClientID + "').click(function() { alert('hello'); }); } bindEvents(); </script>"; PlaceMe.Controls.Add(button); }

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >