Search Results

Search found 1784 results on 72 pages for 'room'.

Page 32/72 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• ASP.NET request queue priority

  - by dan

  I'm on IIS 7 and .NET 4.0. My understanding is that IIS takes requests and passes them off to ASP.NET worker threads. If all the threads are in use, the request goes into a queue and is processed once a thread becomes available. If the queue goes over a certain size, all new requests get a 503 until there is room in the queue again. Is there a way to prioritize the order in which queued requests are served? For example, I have consumer traffic and infrastructure traffic coming to the same server. If there are no available threads, I'd like for the consumer requests to be served first, even if they have arrived after infrastructure requests. Basically I want to replace the request queue with a priority queue. Is this possible with IIS?

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Need help diagnosing network performance issues

  - by tokes

  I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

  Read the article

• cannot ssh to computer behind a dd-wrt bridge

  - by Jayaraman

  In my home network , i have dd-wrt router in another room , which bridges wifi from main home router (linksys) to the computers wired behind dd-wrt router. Now I cannot ssh from my laptop ( connected to linksys wifi) to the computers behind dd-wrt wifi bridge. I am able to ping the individual computers behind the dd-wrt bridge. When it comes to ssh or telnet to the computers , it is blocked. What can I do to make dd-wrt bridge to open up all ports in the dd-wrt bridge ?

  Read the article

• Setting up dynamic DNS for linked router

  - by cherrun

  I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

  Read the article

• Setting up dynamic DNS for linked router

  - by cherrun

  I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

  Read the article

• How can I split Excel data from one row into multiple rows

  - by Lenny

  Good afternoon, Is there a way to split data from one row and store to separate rows? I have a large file that contains scheduling information and I'm trying to develop a list that comprises each combination of course, day, term and period per line. For example I have a file similiar to this: Crs:Sn Title Tchr TchrName Room Days Terms Periods 7014:01 English I 678 JUNG 300 M,T,W,R,F 3,4 2,3 1034:02 English II 123 MOORE 352 M,T,W,R,F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M,T,W,R,F 3,4 3,4 0180:06 Pub Speaking 23 ROSEN 228 M,T,W,R,F 3,4 5 7200:03 PE I 244 HARILAOU GYM 4 M,T,W,R,F 1,2,3 3 2101:01 Physics/Lab 441 JONES 348 M,T,W,R,F 1,2,3,4 2,3 Should extract to this in an excel file: Crs:Sn Title Tchr# Tchr Room Days Terms Period 7014:01 English I 678 JUNG 300 M 3 2 7014:01 English I 678 JUNG 300 T 3 2 7014:01 English I 678 JUNG 300 W 3 2 7014:01 English I 678 JUNG 300 R 3 2 7014:01 English I 678 JUNG 300 F 3 2 7014:01 English I 678 JUNG 300 M 4 2 7014:01 English I 678 JUNG 300 T 4 2 7014:01 English I 678 JUNG 300 W 4 2 7014:01 English I 678 JUNG 300 R 4 2 7014:01 English I 678 JUNG 300 F 4 2 7014:01 English I 678 JUNG 300 M 3 3 7014:01 English I 678 JUNG 300 T 3 3 7014:01 English I 678 JUNG 300 W 3 3 7014:01 English I 678 JUNG 300 R 3 3 7014:01 English I 678 JUNG 300 F 3 3 7014:01 English I 678 JUNG 300 M 4 3 7014:01 English I 678 JUNG 300 T 4 3 7014:01 English I 678 JUNG 300 W 4 3 7014:01 English I 678 JUNG 300 R 4 3 7014:01 English I 678 JUNG 300 F 4 3 1034:02 English II 123 MOORE 352 M 3 4 1034:02 English II 123 MOORE 352 T 3 4 1034:02 English II 123 MOORE 352 W 3 4 1034:02 English II 123 MOORE 352 R 3 4 1034:02 English II 123 MOORE 352 F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M 3 3 7144:02 Algebra 238 VYSOTSKY 352 T 3 3 7144:02 Algebra 238 VYSOTSKY 352 W 3 3 7144:02 Algebra 238 VYSOTSKY 352 R 3 3 7144:02 Algebra 238 VYSOTSKY 352 F 3 3 7144:02 Algebra 238 VYSOTSKY 352 M 4 3 7144:02 Algebra 238 VYSOTSKY 352 T 4 3 7144:02 Algebra 238 VYSOTSKY 352 W 4 3 7144:02 Algebra 238 VYSOTSKY 352 R 4 3 7144:02 Algebra 238 VYSOTSKY 352 F 4 3 7144:02 Algebra 238 VYSOTSKY 352 M 3 4 7144:02 Algebra 238 VYSOTSKY 352 T 3 4 7144:02 Algebra 238 VYSOTSKY 352 W 3 4 7144:02 Algebra 238 VYSOTSKY 352 R 3 4 7144:02 Algebra 238 VYSOTSKY 352 F 3 4 7144:02 Algebra 238 VYSOTSKY 352 M 4 4 7144:02 Algebra 238 VYSOTSKY 352 T 4 4 7144:02 Algebra 238 VYSOTSKY 352 W 4 4 7144:02 Algebra 238 VYSOTSKY 352 R 4 4 7144:02 Algebra 238 VYSOTSKY 352 F 4 4 0180:06 Pub Speaking 23 ROSEN 228 M 3 5 0180:06 Pub Speaking 23 ROSEN 228 T 3 5 0180:06 Pub Speaking 23 ROSEN 228 W 3 5 0180:06 Pub Speaking 23 ROSEN 228 R 3 5 0180:06 Pub Speaking 23 ROSEN 228 F 3 5 0180:06 Pub Speaking 23 ROSEN 228 M 4 5 0180:06 Pub Speaking 23 ROSEN 228 T 4 5 0180:06 Pub Speaking 23 ROSEN 228 W 4 5 0180:06 Pub Speaking 23 ROSEN 228 R 4 5 0180:06 Pub Speaking 23 ROSEN 228 F 4 5 7200:03 PE I 244 HARILAOU GYM 4 M 1 3 7200:03 PE I 244 HARILAOU GYM 4 M 2 3 7200:03 PE I 244 HARILAOU GYM 4 M 3 3 7200:03 PE I 244 HARILAOU GYM 4 T 1 3 7200:03 PE I 244 HARILAOU GYM 4 T 2 3 7200:03 PE I 244 HARILAOU GYM 4 T 3 3 7200:03 PE I 244 HARILAOU GYM 4 W 1 3 7200:03 PE I 244 HARILAOU GYM 4 W 2 3 7200:03 PE I 244 HARILAOU GYM 4 W 3 3 7200:03 PE I 244 HARILAOU GYM 4 R 1 3 7200:03 PE I 244 HARILAOU GYM 4 R 2 3 7200:03 PE I 244 HARILAOU GYM 4 R 3 3 7200:03 PE I 244 HARILAOU GYM 4 F 1 3 7200:03 PE I 244 HARILAOU GYM 4 F 2 3 7200:03 PE I 244 HARILAOU GYM 4 F 3 3 2101:01 Physics/Lab 441 JONES 348 M 1 2 2101:01 Physics/Lab 441 JONES 348 M 2 2 2101:01 Physics/Lab 441 JONES 348 M 3 2 2101:01 Physics/Lab 441 JONES 348 M 4 2 2101:01 Physics/Lab 441 JONES 348 T 1 2 2101:01 Physics/Lab 441 JONES 348 T 2 2 2101:01 Physics/Lab 441 JONES 348 T 3 2 2101:01 Physics/Lab 441 JONES 348 T 4 2 2101:01 Physics/Lab 441 JONES 348 W 1 2 2101:01 Physics/Lab 441 JONES 348 W 2 2 2101:01 Physics/Lab 441 JONES 348 W 3 2 2101:01 Physics/Lab 441 JONES 348 W 4 2 2101:01 Physics/Lab 441 JONES 348 R 1 2 2101:01 Physics/Lab 441 JONES 348 R 2 2 2101:01 Physics/Lab 441 JONES 348 R 3 2 2101:01 Physics/Lab 441 JONES 348 R 4 2 2101:01 Physics/Lab 441 JONES 348 F 1 2 2101:01 Physics/Lab 441 JONES 348 F 2 2 2101:01 Physics/Lab 441 JONES 348 F 3 2 2101:01 Physics/Lab 441 JONES 348 F 4 2 2101:01 Physics/Lab 441 JONES 348 M 1 3 2101:01 Physics/Lab 441 JONES 348 M 2 3 2101:01 Physics/Lab 441 JONES 348 M 3 3 2101:01 Physics/Lab 441 JONES 348 M 4 3 2101:01 Physics/Lab 441 JONES 348 T 1 3 2101:01 Physics/Lab 441 JONES 348 T 2 3 2101:01 Physics/Lab 441 JONES 348 T 3 3 2101:01 Physics/Lab 441 JONES 348 T 4 3 2101:01 Physics/Lab 441 JONES 348 W 1 3 2101:01 Physics/Lab 441 JONES 348 W 2 3 2101:01 Physics/Lab 441 JONES 348 W 3 3 2101:01 Physics/Lab 441 JONES 348 W 4 3 2101:01 Physics/Lab 441 JONES 348 R 1 3 2101:01 Physics/Lab 441 JONES 348 R 2 3 2101:01 Physics/Lab 441 JONES 348 R 3 3 2101:01 Physics/Lab 441 JONES 348 R 4 3 2101:01 Physics/Lab 441 JONES 348 F 1 3 2101:01 Physics/Lab 441 JONES 348 F 2 3 2101:01 Physics/Lab 441 JONES 348 F 3 3 2101:01 Physics/Lab 441 JONES 348 F 4 3 I'm trying to avoid going line by line separating the data. I'm not well versed on the VBA functionality of Excel, but would like to get started using it. Any help would be greatly appreciated.

  Read the article

• Immutable hard links on ext3/4?

  - by shovas

  In my research on file versioning at the fs level, snapshotting, and related ideas, I took a look at hard-links and exactly what they are and how they behave. Using rsync you can get a pretty slick poor man's snapshotting system up and running on file systems that don't natively support it. But, can you get immutable hard links on ext3/4 or any other file systems for that matter? My definition for immutable hard link is: A hard link which, when changed on one location, becomes a regular copy and no longer a hard link. I would like this because it would enable snapshotting use of the source data to link against instead of a copy of the data (in the case of the rsync snapshotting technique). I have gigabytes of data that can't be duplicated due to space restrictions but I have enough room if I can intelligently snapshot individual changed files with the rest linked to the source not a copy. Given all that, is there some other technique, feature or technology I'm really looking for?

  Read the article

• Internet speed showing high value but never felt that speed [closed]

  - by Kiran D Pillai

  I use Reliance Netconnect+ in my Toshiba Satellite laptop. My OS is Windows 7 Ultimate. I've seen speeds up to 1500 kbps when travelling and have an average speed of 400 kbps at my room premises. I'm sorry, I've never felt that much speed while browsing or downloading. Sometimes I think some other programs are also sharing the same network. It is just showing 200 or 500 kbps but I feel 25 or 50 kbps. Is there any way to prevent them? I use Google Chrome downloaded from Google site. Please suggest me some solutions.

  Read the article

• Browser won't connect to svn server

  - by devpi

  This has been driving me nuts. For some reason, I can't access my svn repository using a browser in this laptop that I'm using right now (firefox & ie) The connection just times out. I'm at home right now and the server is in another room. It connects OK there and it also connects OK in my virtual machine in this same laptop. I'm pretty stumped right now and can't figure out why this is happening. I've also checked the proxies and I'm 100% sure I'm not using any at all. The virtual machine running on this laptop is XP 32bit and this one is a Win7 64 bit. Thanks

  Read the article

• UPS and power strip interactions?

  - by chaos

  Sometimes I hear that you shouldn't plug (UPS brand X / any UPS) into (power strip brand X / any power strip) because of some interaction leading to poorly conditioned power, reduced battery life, massive explosions spattering the room with battery acid, and so on. Sometimes I hear that it's the power strip that you shouldn't plug into the UPS. What I haven't gotten is a clear idea of how reliable these recommendations are or how generally/specifically they apply. Can anyone speak precisely and non-urban-legendfully on these UPS and power strip interactions, if there are in fact ones worth thinking about?

  Read the article

• Windows 7 side Taskbar: how to have multiple icon columns?

  - by user151426

  NOTE: I know this can be done with the taskbar on the bottom. I seek the solution for a taskbar on the side. I attached a picture of what I mean. In the screenshots, you can see that my taskbar program icons are arranged in a single column. I want to be able to have multiple columns. This would mean arranging the icons into squares and have them be placed side by side, as well as above and below one another. This can be accomplished with taskbar being on the bottom of the screen, however, I require this arrangement when I have my taskbar on the side of my screen. Currently if I expand the taskbar horizontally, it only stretches out the icons horizontally rather than turn them into small squares to make room for side by side and placement of icons. Additional icons that I add to my current taskbar are only accessible by using the horizontal scroll bar that appears at the bottom of the taskbar when there is no more space to accommodate any more icons.

  Read the article

• Thinking of Powerline adapters for networking

  - by Henderson McCoy

  will powerline work as good as wifi I am now in a large house (renting a room) and the router is in the front of the house and I am in the back. Don't know if wifi will have the range and stability so I am looking at all the alternatives from running a long cable to powerline. looks like a powerline adapter set will cost about $50 http://www.bestbuy.com/site/Actiontec---500-Mbps-Powerline-Home-Theater-Network-Adapter-Kit/5215483.p?id=1218625358741&skuId=5215483 has anyone use these or other powerline adapters? how is powerlines speed? Are they more stable then wifi? powerline cost is good i am just currious about the performance

  Read the article

• How do I change the location of DivX cache files?

  - by andygrunt

  I recently installed to the latest version of DivX and suddenly found my C drive filling up with the cache files. I tracked it down to: C:\Files\My Videos\DivX Movies\Temporary Downloaded Files My old laptop (running WinXP) only has a small hard drive and any DivX cache files fills it up so I want it to use my D drive where I have a little more room. The trouble is I can't see anywhere in the DivX preferences where I can change the cache location. Can anyone tell me how I can change the location of the DivX cache files?

  Read the article

• linux ssh -X graphical applications will not start when system load is high

  - by Chrisv

  So I am using ssh -X to access a server. I am at a Xubuntu desktop accessing a Ubuntu server that is in the next room. Usually everything works fine, but when the system load gets high, any graphical applications I have freeze and fail to be restarted. This happens even if the process that is causing the high load has been niced to a low priority with "nice -n 19". And even though the system load is high, the command line works fine with no delay, and other applications I have running on the server (e.g. virtual machines) run fine. But any graphical application running through X dies. When the graphical applications fail they usually give out an error message that suggests a time-out. It seems that something connected to X has a low priority and times out. But what is it, and how does one fix it?

  Read the article

• Share laptop Wi-Fi with router set up as access point via ethernet cables

  - by obie

  I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

  Read the article

• KVM Switch for multiple monitors possible?

  - by jasondavis

  I have been curious about this for YEARS! I have never used a KVM switch (keyboard, mouse, monitor) switch to allow you to use 1 keyboard, mouse, monitor to operate 2 or more computers however I understand the concept and what they are for, just never really had a huge need for 1 until now. Here is my issue though. If possible I need to have a KVM switch hooked up to 2 computers in my room. The catch, I have 2-3 monitors on the PC, so I am looking for a way to have a KVM switch that will support multiple monitors. So PC #1 can be using a mouse, keyboard, 2-3 monitors like normal. I then hit the switch and it makes my mouse, keyboard, and 2-3 monitors switch to PC #2. Has anyone ever heard of a KVM switch being able to support multiple monitors like I described? Or how I can achieve this goal? Please help.

  Read the article

• Change audio output depending on which one is on

  - by pkrish

  I have a PC that is hooked up to my HDTV (via a long hdmi cable) and to a monitor, which is in another room. I have speakers directly plugged to the PC audio out. The PC is next to the monitor and speakers. I am not sure but I think Windows can play sound on only 1 audio device at a time. And I can only set 1 device as the default output. I can get sound on the TV or speaker depending on which device I set to default. But I would have to do this every time I switch between using my TV or my monitor! Is there some way to configure such that sound plays through the TV if the TV is on, else it plays in the speakers? If this is not possible, then the next best alternative would be to get the sound to play on both the devices at the same time. Thanks!

  Read the article

• Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

  - by GraemeF

  I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

  Read the article

• I just ordered 70/10 internet service, and need a new router I think?

  - by data_jepp

  Before I had 25/5 service and the N standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2.4 and 5GHz? Can my laptop be connected at once over both bands? And would that let me use the full 70Mb over Wi-Fi?

  Read the article

• What's an easy way to install a bunch of OSS apps in my home dir on my company's aging Redhat VNC servers?

  - by subopt

  My company's IT group doesn't want to install lots of common stuff on our VNC servers, which run RHEL 4. The list of stuff i want/need includes graphviz, midnight commander, various python libs, sqlite, netbeans, antlr, jdk1.6, etc. They've hobbled rpm somehow, so i can't do rpm --relocate. And i don't want the RHEL4 compatible revs of this stuff anyway. I've probably got the room to build all this stuff in my home dir, but i don't want to take forever tracking down dependencies. Looking for an easy way to get the apps/tools i need, and nothing (or very little) else. Any suggestions?

  Read the article

• How can I switch between the HDMI and DVI outputs of my graphics card?

  - by Owen Melbourne

  I've got an Nvidia GTX 560ti card which currently I've got my 2 monitors hooked up to using the 2 DVI ports. However its got a mini-HDMI port which I've plugged a HDMI cable in (with mini adapter) and lead it into my TV which is across the room. I'm hoping to be able to toggle between the HDMI output and the DVI outputs, however I'm not sure how I'd go about this, Could somebody please point me in the right direction, I'm not really worried about having all 3 on at the same time so that isn't a problem, but if its possible then I'll do that.

  Read the article

• Open Source webapp that shows PC / Projector status in 30+ Lecture rooms

  - by Seanchán

  I am looking for a simple web application that only has a simple graphical representation of the current status of 30+ lecture rooms. I.e. Green = good, Red=bad i.e. PC or Projector not working. With a little message and a ETA as well. I am not looking for monitoring software, merely a way for a tech to flag a room as "technically challenged" until 1PM or until "Friday 10AM". With a message for those lecturers who are interested: "Waiting on replacement bulb" or "Power supply gone" I know this is a simple thing to code up yourself, but I am looking for something that has been around for a few years that has some cool extra little functionality that you wouldn't think of yourself. I just can't find anything like that out there. And just to be clear: not monitoring software, more like lecturer feedback web app.

  Read the article

• Secure PHP environments with PHP-FPM and SFTP

  - by pdd

  I'd like to set up secure environments for a small number of untrusted PHP websites on a Debian server. Right now everything runs on the same Apache2 with mod_php5 and vsftpd for administrative file access, so there is room for improvement. The idea is to use nginx instead of apache, SFTP through OpenSSH instead of vsftpd and chrooted (in sshd_config), individual users for each website with their own pool of PHP processes. All these users and nginx are part of the same group. Now in theory I can set 700 permissions on all PHP scripts and 750 on static files that nginx has to serve up. Theoretically, if a website is compromised all the other users' data is safe, right? Are there better solutions that require less setup time and memory per website? Cheers

  Read the article

• MaxClients in apache. How to know the size of my proccess?

  - by Larry

  From http://httpd.apache.org/docs/2.2/misc/perf-tuning.html The single biggest hardware issue affecting webserver performance is RAM. A webserver should never ever have to swap, as swapping increases the latency of each request beyond a point that users consider "fast enough". This causes users to hit stop and reload, further increasing the load. You can, and should, control the MaxClients setting so that your server does not spawn so many children it starts swapping. This procedure for doing this is simple: determine the size of your average Apache process, by looking at your process list via a tool such as top, and divide this into your total available memory, leaving some room for other processes. The main issue is that I can't understand how to know the size, because, well i have the size of httpd on no more of 3888 But, if we need to determine the number for MaxClients, and I have 4GB of RAM, so I get: 972, so I should use like 900 in the MaxClients?

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >