Search Results

Search found 6590 results on 264 pages for 'success'.

Page 32/264 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • SQL Queries for Creating a rollback point and to rollback to that specific point

    - by Santhosha
    Hi, As per my project requirement i want to perform two operation Password Change Unlock Account(Only unlocking account, no password change!) I want return success only if both the transactions succeeds. Say if password change succeeds and unlock fails i cannot send success or failure. So i want to create a rollback point before password change, if both queries executes successfully i will commit the transaction. If one of the query fails i will discard the changes by rolling back to the rollback point. I am doing this in C++ using ADO. Is there any SQL Queries,using i can create the rollback point and reverting to rollback point and commiting the transaction I am using below commands for Password change ALTER LOGIN [username] WITH PASSWORD = N'password' for Unlock account ALTER LOGIN [%s] WITH CHECK_POLICY = OFF ALTER LOGIN [%s] WITH CHECK_POLICY = ON Thanks in advance!! Santhosh

    Read the article

  • How to “unbind” .result on Jquery Autocomplete?

    - by Cesar
    I have this code: $("#xyz").unautocomplete().autocomplete(dataVar, { minChars: 0, width: 400, matchContains: true, highlightItem: true, formatItem: formatItem, formatResult: formatResult }) .result(findValueCallback).next().click(function() { $(this).prev().search(); }); I call this code many times and the first call works correctly, but after he calls findValueCallback many times, not once more. The unautocomplete don't clear .result What I have to do for call findValueCallback once? Sample Code: var niveis01 = []; var niveis02 = []; var niveis03 = []; $(document).ready(function(){ carregaDadosNivel1(); }); function carregaDadosNivel1() { $.ajax({ url: "http://.....", cache: true, type: "POST", dataType:"json", success: function(data){ ... niveis01 = data; habilitaComboNivel1(); ... }, error: function(xhr, ajaxOptions, thrownError){ ... } }); } function habilitaComboNivel1() { function findValueCallback1(event, data01, formatted) { ... carregaDadosNivel2(); ... } $("#nivel01").unautocomplete().autocomplete(niveis01, { minChars: 0, width: 400, matchContains: true, highlightItem: true, formatItem: formatItem, formatResult: formatResult }).result(findValueCallback1).next().click(function() { $(this).prev().search(); }); } function carregaDadosNivel2() { $.ajax({ url: "http://.....", cache: true, type: "POST", dataType:"json", success: function(data){ ... niveis02 = data; habilitaComboNivel2(); ... }, error: function(xhr, ajaxOptions, thrownError){ ... } }); } function habilitaComboNivel2() { function findValueCallback2(event, data02, formatted) { ... carregaDadosNivel3(); ... } $("#nivel02").unautocomplete().autocomplete(niveis02, { minChars: 0, width: 400, matchContains: true, highlightItem: true, formatItem: formatItem, formatResult: formatResult }).result(findValueCallback2).next().click(function() { $(this).prev().search(); }); } function carregaDadosNivel3() { $.ajax({ url: ""http://.....", cache: true, type: "POST", dataType:"json", success: function(data){ ... niveis03 = data; habilitaComboNivel3(); ... }, error: function(xhr, ajaxOptions, thrownError){ ... } }); } function habilitaComboNivel3() { function findValueCallback3(event, data03, formatted) { ... } $("#nivel03").unautocomplete().autocomplete(niveis03, { minChars: 0, width: 400, matchContains: true, highlightItem: true, formatItem: formatItem, formatResult: formatResult }).result(findValueCallback3).next().click(function() { $(this).prev().search(); }); }

    Read the article

  • Can you handle both json and html datatypes in the same ajax call?

    - by Prabhu
    Is there anyway I can handle both json and html return types when posting jquery ajax: For example, this ajax call expects html back $.ajax({ type: "POST", url: url data: data, dataType: "html", success: function (response) { var $html = "<li class='list-item'>" + response + "</li>"; $('#a').prepend($html); }, error: function (xhr, status, error) { alert(xhr.statusText); } }); but I wanted to modify it so that I can return a json object if there is a model error. so I can do something like this: success: function (response) { if (response.Error){ alert(response.Message); } else { var $html = "<li class='list-item'>" + response + "</li>"; $('#a').prepend($html); } Is this possible?

    Read the article

  • Are there any real benefits to including javascript dynamically rather than as script tags at the bo

    - by SB
    I've read that including the scripts dynamically may provide some better performance, however i'm not really seeing that on the small local tests I'm doing. I created a jquery plugin to dynamically load other plugins as necessary and am curious as to if this is actually a good idea. The following would be called onready or at the bottom of the page(I can provide the source for the plugin if anyone is interested): $.fn.executePlugin( 'qtip', // looks in default folder { required: '/javascript/plugin/easing.js', // not really required for qtip just testing it version: 1, //used for versioning and caching checkelement: '#thumbnail', // will not include plugin if $(element).length==0 css: 'page.css', // include this css file as well with plugin cache:true, // $.ajax will use cache:true success:function() { // success function to be called after the plugin loads - apply qtip to an element $('#thumbnail').qtip( { content: 'Some basic content for the tooltip', // Give it some content, in this case a simple string style: {name:'cream'}, }); } });

    Read the article

  • jQuery won't parse my JSON from AJAX query

    - by littlecharva
    Hi, I'm having difficulty parsing some JSON data returned from my server using jQuery.ajax() To perform the AJAX I'm using: $.ajax({ url: myUrl, cache: false, dataType: "json", success: function(data){ ... }, error: function(e, xhr){ ... } }); And if I return an array of items then it works fine: [ { title: "One", key: "1" }, { title: "Two", key: "2" } ] The success function is called and receives the correct object. However, when I'm trying to return a single object: { title: "One", key: "1" } The error function is called and xhr contains 'parsererror'. I've tried wrapping the JSON in parenthesis on the server before sending it down the wire, but it makes no difference. Yet if I paste the content into a string in Javascript and then use the eval() function, it evaluates it perfectly. Any ideas what I'm doing wrong? Anthony

    Read the article

  • Specify an inline callback function as an argument.

    - by Matthias Vance
    LS, Let me first explain what I'm trying to achieve using some pseudo-code (JavaScript). // Declare our function that takes a callback as as an argument, and calls the callback with true. B(func) { func(true); } // Call the function B(function(bool success) { /* code that uses success */ }); I hope this says it all. If not, please comment on my question so I can write a little more to clarify my issue. What I want is to have code like this in C++. I have tried to use lambda functions, but I was unable to specify a parameter type for those. Kind regards, Matthias Vance

    Read the article

  • HTML element not accessible with jQuery

    - by Kris-I
    Hello, I have a via with some jQuery function to get value from HTML element (to access element available and element not yet available). On of these element is a dropdown, when I select a value an another vue is added in the bottom of the page in a div. When I try to access an element added by this view, I received "undefined". What can I do ? In the div #ProductDetail, I add element. and it's these elements I can't access. $.ajax({ type: "POST", url: "/Product/Edition", data: { id: getId() }, success: function(data) { $("#divDisplayDialogProduct").html(data); $('#ProductType').change(function() { $.ajax({ type: "POST", url: "/Product/ShowDetail", data: { id: $('#ProductType').val() }, success: function(data) { $("#ProductDetail").html(data); }, error: function(XMLHttpRequest, textStatus, errorThrown) { } }) }); }, error: function(XMLHttpRequest, textStatus, errorThrown) { } })

    Read the article

  • jquery addresses and live method

    - by Jay
    //deep linking $.fn.ajaxAnim = function() { $(this).animW(); $(this).html('<div class="load-prog">loading...</div>'); } $("document").ready(function(){ contM = $('#main-content'); contS = $('#second-content'); $(contM).hide(); $(contM).addClass('hidden'); $(contS).hide(); $(contS).addClass('hidden'); function loadURL(URL) { //console.log("loadURL: " + URL); $.ajax({ url: URL, beforeSend: function(){$(contM).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contM).html(data); $('.post-content').initializeScroll(); } }); } // Event handlers $.address.init(function(event) { //console.log("init: " + $('[rel=address:' + event.value + ']').attr('href')); }).change(function(event) { evVal = event.value; if(evVal == '/'){return false;} else{ $.ajax({ url: $('[rel=address:' + evVal + ']').attr('href'), beforeSend: function(){$(contM).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contM).html(data); $('.post-content').initializeScroll(); }}); } //console.log("change"); }) $('.update-main a, a.update-main').live('click', function(){ loadURL($(this).attr('href')); return false; }); $(".update-second a, a.update-second").live('click', function() { var link = $(this); $.ajax({ url: link.attr("href"), beforeSend: function(){$(contS).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contS).html(data); $('.post-content').initializeScroll(); }}); return false; }); }); I'm using jquery addresses to update content while maintaining a useful url. When clicking on links in a main nav, the url is updated properly, but when links are loaded dynamically with ajax, the url address function breaks. I have made 'click' events live, allowing for content to be loaded via dynamically loaded links, but I can't seem to make the address event listener live, but this seems to be the only way to make this work. Is my syntax wrong if I change this : $.address.change(function(event) { to this: $.address.live('change', function(event) { or does the live method not work with this plugin?

    Read the article

  • Ext RowEditor.js does not fire 'afteredit' event

    - by terrani
    Hi, I have a Ext grid with RowEditor plugin. I have the following code to add 'afteredit' event to the roweditor object. store.on('update',function(){ }); editor.on("afteredit",function(roweditor,changes,record,index){ $.ajax({ url: $("#web").val() + "/registration/client/address-save" ,type: 'post' ,data: record.json ,dataType: 'json' ,success: function(data){ if(data.success == true){ alert("Update Successfully"); } } }); }); when I click a row and edit a value, sometimes the grid fires 'afteredit' event, but sometimes it doesn't. Do I have a problem with my code above?

    Read the article

  • Mimicking basic fcntl or SetHandleInformation call in .Net

    - by Tristan
    Tornado enables win32 support by faking Python's fcntl function using SetHandleInformation, which is available via ctypes on Windows. After some other small fixes, this actually works using IronPython on Windows as well (sadly, IronPython is five times slower). I'd like to get Tornado working on any CLI platform, such using Mono on OSX or Linux. Is there a managed, cross-platform, .Net approach that can fake fcntl? Here's the win32 code from Tornado: SetHandleInformation = ctypes.windll.kernel32.SetHandleInformation SetHandleInformation.argtypes = (ctypes.wintypes.HANDLE, ctypes.wintypes.DWORD, ctypes.wintypes.DWORD) SetHandleInformation.restype = ctypes.wintypes.BOOL HANDLE_FLAG_INHERIT = 0x00000001 F_GETFD = 1 F_SETFD = 2 F_GETFL = 3 F_SETFL = 4 FD_CLOEXEC = 1 os.O_NONBLOCK = 2048 FIONBIO = 126 def fcntl(fd, op, arg=0): if op == F_GETFD or op == F_GETFL: return 0 elif op == F_SETFD: # Check that the flag is CLOEXEC and translate if arg == FD_CLOEXEC: fd = int(fd) success = SetHandleInformation(fd, HANDLE_FLAG_INHERIT, arg) if not success: raise ctypes.GetLastError() else: raise ValueError("Unsupported arg") else: raise ValueError("Unsupported op")

    Read the article

  • Where is the .cod file placed when the BlackBerry Widget is built from Eclipse?

    - by xueru
    I am experimenting with various mobile platforms, and this is my first day with BB. I am using Web Plug in 2.0.0 with SDK 1.0.0. As I am trying to run one of the samples in the simulator (5.0.0.469, Storem 2 9550) When I run the BB widget, I got the following in the eclipse console, but I could not find the .cod file to be loaded to the simulator. Please help!! By the way I am using xp and jdk6 update 18 BUILDING upComingAppointment cmd.exe /c bbwp C:\tshenWorkSpace\blackberry\upComingAppointment\b uild\upComingAppointment.zip /o C:\tshenWorkSpace\blackberry\upComingAppointment\b uild BUILD SUCCESS BUILDING upComingAppointmentcmd.exe /c bbwp C:\tshenWorkSpace\blackberry\upComingAppointment\b uild\upComingAppointment.zip /o C:\tshenWorkSpace\blackberry\upComingAppointment\b uildBUILD SUCCESS************************

    Read the article

  • JsonResult shows up a file download in browser

    - by joshb
    I'm trying to use jquery.Ajax to post data to an ASP.NET MVC2 action method that returns a JsonResult. Everything works great except when the response gets back to the browser it is treated as a file download instead of being passed into the success handler. Here's my code: Javascript: <script type="text/javascript"> $(document).ready(function () { $("form[action$='CreateEnvelope']").submit(function () { $.ajax({ url: $(this).attr("action"), type: "POST", data: $(this).serialize(), dataType: "json", success: function (envelopeData) { alert("test"); } }); }); return false; }); </script> Action method on controller: public JsonResult CreateEnvelope(string envelopeTitle, string envelopeDescription) { //create an envelope object and return return Json(envelope); } If I open the downloaded file the json is exactly what I'm looking for and the mime type is shown as application/json. What am I missing to make the jquery.ajax call receive the json returned?

    Read the article

  • What is the best workaround for the WCF client `using` block issue?

    - by Eric King
    I like instantiating my WCF service clients within a using block as it's pretty much the standard way to use resources that implement IDisposable: using (var client = new SomeWCFServiceClient()) { //Do something with the client } But, as noted in this MSDN article, wrapping a WCF client in a using block could mask any errors that result in the client being left in a faulted state (like a timeout or communication problem). Long story short, when Dispose() is called, the client's Close() method fires, but throws and error because it's in a faulted state. The original exception is then masked by the second exception. Not good. The suggested workaround in the MSDN article is to completely avoid using a using block, and to instead instantiate your clients and use them something like this: try { ... client.Close(); } catch (CommunicationException e) { ... client.Abort(); } catch (TimeoutException e) { ... client.Abort(); } catch (Exception e) { ... client.Abort(); throw; } Compared to the using block, I think that's ugly. And a lot of code to write each time you need a client. Luckily, I found a few other workarounds, such as this one on IServiceOriented. You start with: public delegate void UseServiceDelegate<T>(T proxy); public static class Service<T> { public static ChannelFactory<T> _channelFactory = new ChannelFactory<T>(""); public static void Use(UseServiceDelegate<T> codeBlock) { IClientChannel proxy = (IClientChannel)_channelFactory.CreateChannel(); bool success = false; try { codeBlock((T)proxy); proxy.Close(); success = true; } finally { if (!success) { proxy.Abort(); } } } } Which then allows: Service<IOrderService>.Use(orderService => { orderService.PlaceOrder(request); } That's not bad, but I don't think it's as expressive and easily understandable as the using block. The workaround I'm currently trying to use I first read about on blog.davidbarret.net. Basically you override the client's Dispose() method wherever you use it. Something like: public partial class SomeWCFServiceClient : IDisposable { void IDisposable.Dispose() { if (this.State == CommunicationState.Faulted) { this.Abort(); } else { this.Close(); } } } This appears to be able to allow the using block again without the danger of masking a faulted state exception. So, are there any other gotchas I have to look out for using these workarounds? Has anybody come up with anything better?

    Read the article

  • JQuery and Nokia :)

    - by Radhika
    Hi I was trying to mobilise my website and I ran into an issue with Jquery. When I was trying to perform a jquery call (.$ajax) it was not getting rendered. This is the part of the code var returnData = ''; $.ajax({url: './indexSubmit.php', async: false, dataType: 'json', data:{flag:'vehicleInfo', vehicleId:xVehicleId}, success: function(data,textStatus){ if(textStatus != 'success'){ alert('Error: '+ textStatus); return; } returnData = data; I am not sure, but I guess I need to install jquery in the browser. If yes, can I automatically download and install jquery in the browser using some javascript?

    Read the article

  • Hold i ajax call in every minute calling section

    - by gowri
    i am calling ajax every second in page.. Here the server page returns randomly generated number,using this number(converted into seconds) i am triggering another function in ajax success .it works My problem suppose random number = 5 means trigger() function called after 5 seconds using setTimeout,but rember ajax call is triggering every 1 second so trigger function also called many time. i want to make ajax call wait untill trigger function execution.Which means i wanna pause that ajax call untill 5 seconds after that resume How can i do this ? My coding //this ajax is called every minute $.ajax({ type: "POST", url: 'serverpage', data: ({pid:1}), success: function(msg) { var array = msg.split('/'); if(array[0]==1){ setTimeout(function() { trigger(msg); },array[1]+'000'); } } }); //and my trigger function function trigger(value) { alert("i am triggered !"); } server response maybe 1/2 or 1/5 or 1/ 10 or 1/1 here 1/3(this is converted into seconds)

    Read the article

  • Add properties to stdClass object from another object

    - by Florin
    I would like to be able to do the following: $obj = new stdClass; $obj->status = "success"; $obj2 = new stdClass; $obj2->message = "OK"; How can I extend $obj so that it contains the properties of $obj2, eg: $obj->status //"success" $obj->message // "OK" I know I could use an array, add all properties to the array and then cast that back to object, but is there a more elegant way, something like this: extend($obj, $obj2); //adds all properties from $obj2 to $obj Thanks!

    Read the article

  • Save File to Sharepoint Server using JAX-WS

    - by Evan Porter
    I'm trying to save a file to a Sharepoint server using JAX-WS. The web service call is reporting a success, but the file doesn't show up. I used this command (from a WinXP) to generate the Java code to make the JAX-WS call: wsimport -keep -extension -Xnocompile http://hostname/sites/teamname/_vti_bin/Copy.asmx?WSDL I get a handle on the web service which I called port using the following: CopySoap port = null; if (userName != null && password != null) { Copy service = new Copy(); port = service.getCopySoap(); ((BindingProvider) port).getRequestContext().put(BindingProvider.USERNAME_PROPERTY, userName); ((BindingProvider) port).getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password); } else { throw new Exception("Holy Frijolé! Null userName and/or password!"); } I called the web service using the following: port.copyIntoItems(sourceUrl, destUrlCollection, fields , "Contents of the file".getBytes(), copyIntoItemsResult, copyResultCollection) The sourceUrl and the only url in destUrlCollection equals "hostname/sites/teamname/Tech Docs/Sub Folder". The FieldInformationCollection object named fields contains only one FieldInformation. The FieldInformation object has "HelloWorld.txt" as the value for displayName, internalName and value. The type property is set to FieldType.FILE. The id property is set to (java.util.UUID.randomUUID()).toString(). The call to copyIntoItems returns successfuly; copyIntoItemsResult contains a value of 0 and the only CopyResult object set in copyResultCollection has an error code of "SUCCESS" with a null error message. When I look into the "Tech Docs" library on Sharepoint, in the "Sub Folder" there's no file there. Why wouldn't it tell me what I did wrong? Did I just miss a step? Update (Feb 26th, 2011) I've changed my FieldInformation object's displayName and internalName properties to be "Title" as suggested. Still no joy, but a step in the right direction. After playing around with the urls for a bit, I got these results: With both the sourceUrl and the only destination URL equivalent, with no protocol, I get the SUCCESS response but no actual document appears in the document library. With both of the URLs equivalent but with an "http://" protocol specified, I get an UNKNOWN error with "Object reference not set to an instance of an object." as the message. With the source URL an empty string or null, I get an UNKNOWN error with " Value does not fall within the expected range." as the error message.

    Read the article

  • jQuery UI dialog + Ajax fails with IE 6-7-8

    - by user252849
    hey i have problem with jQuery-ui Dialog when using ajax $.ajax({ url: "folders.php", cache: false, data: { 'do' : 'Ajax' ,'_a' : 'ChangeMoviesFolder' ,'MovieIDS' : MovieIDS ,'toFolderID' : toFolderID ,'fromFolderID' : fromFolderID }, context: document.body, open: function(event, ui) { alert('open'); }, error : function(XMLHttpRequest, textStatus, errorThrown){ // Handle the beforeSend event // alert("responseText: "+errorThrown.message); }, success: function(data){ $('input.checkMovie').attr('checked',0); $("#resultsTable").find('tr.selectable-row').removeClass('active'); if (data == '1') { window.location = WWW_ROOT+'movies.php?do=List&FolderID='+toFolderID; } $dialog.dialog("close"); }}); when using IE ajax never get to success option in error i got "This method cannot be called until the open method has been called" Its happen only in IE. Does any one may know what the problem might be ? (all vars are ok and works perfectly in FF & chrome) thanks.

    Read the article

  • Kill a 10 minute old zombie process in linux bash script

    - by Steve
    I've been tinkering with a regex answer by yukondude with little success. I'm trying to kill processes that are older than 10 minutes. I already know what the process IDs are. I'm looping over an array every 10 min to see if any lingering procs are around and need to be killed. Anybody have any quick thoughts on this? Thanks, Steve ps -eo uid,pid,etime 3233332 | egrep ' ([0-9]+-)?([0-9]{2}:?){3}' | awk '{print $2}' | xargs -I{} kill {} I've been tinkering with the answer posted by yukondude with little success. I'm trying to kill processes that are older than 10 minutes. I already know what the process IDs are. I'm looping over an array every 10 min to see if any lingering procs are around and need to be killed. Anybody have any quick thoughts on this? Thanks, Steve

    Read the article

  • Non-existent file in limbo prevents push to remote branch (Bazaar VCS)

    - by das_weezul
    Hi! I use Bazaar VCS to version files locally on my notebook. When im in the office I merge the changes to a repository on a windows share and also push all the files there (for backup reasons). My Problem: The last push resulted in an error, because I added a file with a very long filename (I had that problem before ... python doesn't like long filenames). So I removed the file (I didn't need it anyway) and forgot about the problem for a while, because commiting still worked fine. The next time I wanted to push my new revision I got a new error: bzr: ERROR: [Error 3] Das System kann den angegebenen Pfad nicht finden: u'//path/to/remote/branch/.bzr/checkout/limbo/new-8/loooooooongfilename.xls' translation: bzr: ERROR: [Error 3] The system can't find the following path: What I've tried: Deleting the limbo folder-- limbo folder doesn't exist Create the missing path with a dummy-file -- bazaar locks the branch -- unlock -- same problem as before bzr check -- Everything is fine -- No success bzr reconcile -- No success Thanks for reading ;o)

    Read the article

  • ajax request rely on the previous one

    - by Lynn
    I want to do something like this: $.ajax({ url: SOMEWHERE, ... success: function(data){ // do sth... var new_url = data.url; $.ajax({ url: new_url, success: function(data){ var another_url = data.url; // ajax call rely on the result of previous one $.ajax({ // do sth }) } }) }, fail: function(){ // do sth... // ajax call too $.ajax({ // config }) } }) the code looks like shit. I wonder how to make it looks pretty. Some best practice?

    Read the article

  • Bit manipulation, permutate bits

    - by triktae
    Hi. I am trying to make a loop that loops through all different integers where exactly 10 of the last 40 bits are set high, the rest set low. The reason is that I have a map with 40 different values, and I want to sum all different ways ten of these values can be multiplied. (This is just out of curiosity, so it's really the "bitmanip"-loop that is of interest, not the sum as such.) If I were to do this with e.g. 2 out of 4 bits, it would be easy to set all manually, 0011 = 7, 0101 = 5, 1001 = 9, 0110 = 6, 1010 = 10, 1100 = 12, but with 10 out of 40 I can't seem to find a method to generate these effectively. I tried, starting with 1023 ( = 1111111111 in binary), finding a good way to manipulate this, but with no success. I've been trying to do this in C++, but it's really the general method(if any) that is of interest. I did some googling, but with little success, if anyone has a good link, that would of course be appreciated too. :)

    Read the article

  • sqlite3_prepare_v2 throws SQLITE_ERROR in iPhone code

    - by incognitii
    I have a piece of code that used to work, and other iterations of it that DO work within the same app, and have compared code, and they are identical in structure. This is driving me INSANE!!!!!! In this instance, sqlite3_prepare_v2 is throwing one of those useless SQLITE_ERROR exceptions. Apparently, it can FIND the database, and OPEN the database, but it can't prepare a statement for it. Does ANYONE have any ideas? I'm desperate here. second_maindatabaseName = @"database.db"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; second_maindatabasePath = [documentsDir stringByAppendingPathComponent:second_maindatabaseName]; // Setup the database object sqlite3 *database; // Init the entry requirements Array BOOL success; NSFileManager *fileManager = [NSFileManager defaultManager]; success = [fileManager fileExistsAtPath:second_maindatabasePath]; if(!success) { NSString *databasePathFromApp = [[[NSBundle mainBundle] resourcePath] stringByAppendingPathComponent:second_maindatabaseName]; [fileManager copyItemAtPath:databasePathFromApp toPath:second_maindatabasePath error:nil]; [fileManager release]; } if(sqlite3_open([second_maindatabasePath UTF8String], &database) == SQLITE_OK) { NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; value1 = [defaults stringForKey:kConst1]; value2 = [defaults stringForKey:kConst2]; value3 = [defaults stringForKey:kConst3]; value4 = [defaults stringForKey:kConst4]; const char *sqlStatement = "SELECT * FROM myTable WHERE Field1 = ? AND Field2 = ? AND Field3 = ? AND Field4 = ?"; sqlite3_stmt *compiledStatement; int error_code = sqlite3_prepare_v2(database, sqlStatement, -1, &compiledStatement, NULL); if(error_code == SQLITE_OK) { // Loop through the results and add them to the feeds array sqlite3_bind_text(compiledStatement,1,[value1 UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(compiledStatement,2,[value2 UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(compiledStatement,3,[value3 UTF8String],-1,SQLITE_TRANSIENT); sqlite3_bind_text(compiledStatement,4,[value4 UTF8String],-1,SQLITE_TRANSIENT); while(sqlite3_step(compiledStatement) == SQLITE_ROW) { // Read the data from the result row NSString *aNewValue = [NSString stringWithUTF8String:(char *)sqlite3_column_text(compiledStatement, 1)]; } } sqlite3_finalize(compiledStatement); } sqlite3_close(database);

    Read the article

  • Posting from JQuery to WCF Service

    - by Villager
    Hello, I have a WCF Service (called "myservice.svc") that takes a message from a user and saves it to the database. It returns a response to the user in the form of a number. This operation looks like this: [OperationContract] [WebGet] public string SubmitMessage(string message) { try { // SAVE TO DATABASE return "1"; } catch (Exception ex) { return "0"; } } I want to call this operation from some JQuery. I'm using the approach shown here: $.getJSON( "/services/myService.svc", {message:"some text"}, function (data) { alert("success"); } ); Oddly, the "success" alert is never displayed. In addition, I have set a breakpoint in my WCF service and it is never being tripped. What am I doing wrong? Thank you

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >