Search Results

Search found 890 results on 36 pages for 'technorati'.

Page 32/36 | < Previous Page | 28 29 30 31 32 33 34 35 36  | Next Page >

• Who broke the build?

  - by Martin Hinshelwood

  I recently sent round a list of broken builds at SSW and asked for them to be fixed or deleted if they are not being used. My colleague Peter came back with a couple of questions which I love as it tells me that at least one person reads my email I think first we need to answer a couple of other questions related to builds in general.   Why do we want the build to pass? Any developer can pick up a project and build it Standards can be enforced Constant quality is maintained Problems in code are identified early What could a failed build signify? Developers have not built and tested their code properly before checking in. Something added depends on a local resource that is not under version control or does not exist on the target computer. Developers are not writing tests to cover common problems. There are not enough tests to cover problems. Now we know why, lets answer Peters questions: Where is this list? (can we see it somehow) You can normally only see the builds listed for each project. But, you have a little application called “Build Notifications” on your computer. It is installed when you install Visual Studio 2010. Figure: Staring the build notification application on Windows 7. Once you have it open (it may disappear into your system tray) you should click “Options” and select all the projects you are involved in. This application only lists projects that have builds, so don’t worry if it is not listed. This just means you are about to setup a build, right? I just selected ALL projects that have builds. Figure: All builds are listed here In addition to seeing the list you will also get toast notification of build failure’s. How can we get more info on what broke the build? (who is interesting too, to point the finger but more important is what) The only thing worse than breaking the build, is continuing to develop on a broken build! Figure: I have highlighted the users who either are bad for braking the build, or very bad for not fixing it. To find out what is wrong with a build you need to open the build definition. You can open a web version by double clicking the build in the image above, or you can open it from “Team Explorer”. Just connect to your project and open out the “Builds” tree. Then Open the build by double clicking on it. Figure: Opening a build is easy, but double click it and then open a build run from the list. Figure: Good example, the build and tests have passed Figure: Bad example, there are 133 errors preventing POK from being built on the build server. For identifying failures see: Solution: Getting Silverlight to build on Team Build 2010 RC Solution: Testing Web Services with MSTest on Team Build Finding the problem on a partially succeeded build So, Peter asked about blame, let’s have a look and see: Figure: The build has been broken for so long I have no idea when it was broken, but everyone on this list is to blame (I am there too) The rest of the history is lost in the sands of time, there is no way to tell when the build was originally broken, or by whom, or even if it ever worked in the first place. Build should be protected by the team that uses them and the only way to do that is to have them own them. It is fine for me to go in and setup a build, but the ownership for a build should always reside with the person who broke it last. Conclusion This is an example of a pointless build. Lets be honest, if you have a system like TFS in place and builds are constantly left broken, or not added to projects then your developers don’t yet understand the value. I have found that adding a Gated Check-in helps instil that understanding of value. If you prevent them from checking in without passing that basic quality gate of “your code builds on another computer” then it makes them look more closely at why they can’t check-in. I have had builds fail because one developer had a “d” drive, but the build server did not. That is what they are there to catch.   If you want to know what builds to create and why I wrote a post on “Do you know the minimum builds to create on any branch?”   Technorati Tags: TFS2010,Gated Check-in,Builds,Build Failure,Broken Build

  Read the article

• Liskov Substitution Principle and the Oft Forgot Third Wheel

  - by Stacy Vicknair

  Liskov Substitution Principle (LSP) is a principle of object oriented programming that many might be familiar with from the SOLID principles mnemonic from Uncle Bob Martin. The principle highlights the relationship between a type and its subtypes, and, according to Wikipedia, is defined by Barbara Liskov and Jeanette Wing as the following principle:   Let be a property provable about objects of type . Then should be provable for objects of type where is a subtype of .   Rectangles gonna rectangulate The iconic example of this principle is illustrated with the relationship between a rectangle and a square. Let’s say we have a class named Rectangle that had a property to set width and a property to set its height. 1: Public Class Rectangle 2: Overridable Property Width As Integer 3: Overridable Property Height As Integer 4: End Class   We all at some point here that inheritance mocks an “IS A” relationship, and by gosh we all know square IS A rectangle. So let’s make a square class that inherits from rectangle. However, squares do maintain the same length on every side, so let’s override and add that behavior. 1: Public Class Square 2: Inherits Rectangle 3:  4: Private _sideLength As Integer 5:  6: Public Overrides Property Width As Integer 7: Get 8: Return _sideLength 9: End Get 10: Set(value As Integer) 11: _sideLength = value 12: End Set 13: End Property 14:  15: Public Overrides Property Height As Integer 16: Get 17: Return _sideLength 18: End Get 19: Set(value As Integer) 20: _sideLength = value 21: End Set 22: End Property 23: End Class   Now, say we had the following test: 1: Public Sub SetHeight_DoesNotAffectWidth(rectangle As Rectangle) 2: 'arrange 3: Dim expectedWidth = 4 4: rectangle.Width = 4 5:  6: 'act 7: rectangle.Height = 7 8:  9: 'assert 10: Assert.AreEqual(expectedWidth, rectangle.Width) 11: End Sub   If we pass in a rectangle, this test passes just fine. What if we pass in a square?   This is where we see the violation of Liskov’s Principle! A square might "IS A” to a rectangle, but we have differing expectations on how a rectangle should function than how a square should! Great expectations Here’s where we pat ourselves on the back and take a victory lap around the office and tell everyone about how we understand LSP like a boss. And all is good… until we start trying to apply it to our work. If I can’t even change functionality on a simple setter without breaking the expectations on a parent class, what can I do with subtyping? Did Liskov just tell me to never touch subtyping again? The short answer: NO, SHE DIDN’T. When I first learned LSP, and from those I’ve talked with as well, I overlooked a very important but not appropriately stressed quality of the principle: our expectations. Our inclination is to want a logical catch-all, where we can easily apply this principle and wipe our hands, drop the mic and exit stage left. That’s not the case because in every different programming scenario, our expectations of the parent class or type will be different. We have to set reasonable expectations on the behaviors that we expect out of the parent, then make sure that those expectations are met by the child. Any expectations not explicitly expected of the parent aren’t expected of the child either, and don’t register as a violation of LSP that prevents implementation. You can see the flexibility mentioned in the Wikipedia article itself: A typical example that violates LSP is a Square class that derives from a Rectangle class, assuming getter and setter methods exist for both width and height. The Square class always assumes that the width is equal with the height. If a Square object is used in a context where a Rectangle is expected, unexpected behavior may occur because the dimensions of a Square cannot (or rather should not) be modified independently. This problem cannot be easily fixed: if we can modify the setter methods in the Square class so that they preserve the Square invariant (i.e., keep the dimensions equal), then these methods will weaken (violate) the postconditions for the Rectangle setters, which state that dimensions can be modified independently. Violations of LSP, like this one, may or may not be a problem in practice, depending on the postconditions or invariants that are actually expected by the code that uses classes violating LSP. Mutability is a key issue here. If Square and Rectangle had only getter methods (i.e., they were immutable objects), then no violation of LSP could occur. What this means is that the above situation with a rectangle and a square can be acceptable if we do not have the expectation for width to leave height unaffected, or vice-versa, in our application. Conclusion – the oft forgot third wheel Liskov Substitution Principle is meant to act as a guidance and warn us against unexpected behaviors. Objects can be stateful and as a result we can end up with unexpected situations if we don’t code carefully. Specifically when subclassing, make sure that the subclass meets the expectations held to its parent. Don’t let LSP think you cannot deviate from the behaviors of the parent, but understand that LSP is meant to highlight the importance of not only the parent and the child class, but also of the expectations WE set for the parent class and the necessity of meeting those expectations in order to help prevent sticky situations.   Code examples, in both VB and C# Technorati Tags: LSV,Liskov Substitution Principle,Uncle Bob,Robert Martin,Barbara Liskov,Liskov

  Read the article

• WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

  - by JuergenKress

  You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Union,Except and Intersect operator in Linq

  - by Jalpesh P. Vadgama

  While developing a windows service using Linq-To-SQL i was in need of something that will intersect the two list and return a list with the result. After searching on net i have found three great use full operators in Linq Union,Except and Intersect. Here are explanation of each operator. Union Operator: Union operator will combine elements of both entity and return result as third new entities. Except Operator: Except operator will remove elements of first entities which elements are there in second entities and will return as third new entities. Intersect Operator: As name suggest it will return common elements of both entities and return result as new entities. Let’s take a simple console application as  a example where i have used two string array and applied the three operator one by one and print the result using Console.Writeline. Here is the code for that. C#, using GeSHi 1.0.8.6 using System; using System.Collections.Generic; using System.Linq; using System.Text;     namespace ConsoleApplication1 {     class Program     {         static void Main(string[] args)         {             string[] a = { "a", "b", "c", "d" };             string[] b = { "d","e","f","g"};               var UnResult = a.Union(b);             Console.WriteLine("Union Result");               foreach (string s in UnResult)             {                 Console.WriteLine(s);                          }               var ExResult = a.Except(b);             Console.WriteLine("Except Result");             foreach (string s in ExResult)             {                 Console.WriteLine(s);             }               var InResult = a.Intersect(b);             Console.WriteLine("Intersect Result");             foreach (string s in InResult)             {                 Console.WriteLine(s);             }             Console.ReadLine();                        }          } }   Parsed in 0.022 seconds at 45.54 KB/s Here is the output of console application as Expected. Hope this will help you.. Technorati Tags: Linq,Except,InterSect,Union,C#

  Read the article

• Performing a clean database creation using msbuild

  - by Robert May

  So I’m taking a break from writing about other Agile stuff for a post. :)  I’m still going to get back to the other subjects, but this is fun too. Something I’ve done quite a bit of is MSBuild and CI work.  I’m experimenting with ways to improve what I’ve done in the past, particularly around database CI. Today, I developed a mechanism for starting from scratch with your database.  By scratch, I mean blowing away the existing database and creating it again from a single command line call.  I’m a firm believer that developers should be able to get to a known clean state at the database level with a single command and that they should be operating off of their own isolated database to improve productivity.  These scripts will help that. Here’s how I did it.  First, we have to disconnect users.  I did so using the help of a script from sql server central.  Note that I’m using sqlcmd variable replacement. -- kills all the users in a particular database -- dlhatheway/3M, 11-Jun-2000 declare @arg_dbname sysname declare @a_spid smallint declare @msg varchar(255) declare @a_dbid int set @arg_dbname = '$(DatabaseName)' select @a_dbid = sdb.dbid from master..sysdatabases sdb where sdb.name = @arg_dbname declare db_users insensitive cursor for select sp.spid from master..sysprocesses sp where sp.dbid = @a_dbid open db_users fetch next from db_users into @a_spid while @@fetch_status = 0 begin select @msg = 'kill '+convert(char(5),@a_spid) print @msg execute (@msg) fetch next from db_users into @a_spid end close db_users deallocate db_users GO Once all users are booted from the database, we can commence with recreating the database.  I generated the script that is used to create a database from SQL Server management studio, so I’m only going to show the bits that weren’t generated that are important.  There are a bunch of Alter Database statements that aren’t shown. First, I had to find the default location of the database files in the install, since they can be in many different locations.  I used Method 1 from a technet blog and then modified it a bit to do what I needed to do.  I ended up using dynamic SQL because for the life of me, I couldn’t get the “Filename” property to not return an error when I used anything besides a string.  I’m dropping the database first, if it exists.  Here’s the code:   IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = N'$(DatabaseName)') BEGIN drop database $(DatabaseName) END; go IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; -- Create temp database. Because no options are given, the default data and --- log path locations are used CREATE DATABASE zzTempDBForDefaultPath; DECLARE @Default_Data_Path VARCHAR(512), @Default_Log_Path VARCHAR(512); --Get the default data path SELECT @Default_Data_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 0); --Get the default Log path SELECT @Default_Log_Path = ( SELECT LEFT(physical_name,LEN(physical_name)-CHARINDEX('\',REVERSE(physical_name))+1) FROM sys.master_files mf INNER JOIN sys.[databases] d ON mf.[database_id] = d.[database_id] WHERE d.[name] = 'zzTempDBForDefaultPath' AND type = 1); --Clean up. IF EXISTS(SELECT 1 FROM [master].[sys].[databases] WHERE [name] = 'zzTempDBForDefaultPath') BEGIN DROP DATABASE zzTempDBForDefaultPath END; DECLARE @SQL nvarchar(max) SET @SQL= 'CREATE DATABASE $(DatabaseName) ON PRIMARY ( NAME = N''$(DatabaseName)'', FILENAME = N''' + @Default_Data_Path + N'$(DatabaseName)' + '.mdf' + ''', SIZE = 2048KB , FILEGROWTH = 1024KB ) LOG ON ( NAME = N''$(DatabaseName)Log'', FILENAME = N''' + @Default_Log_Path + N'$(DatabaseName)' + '.ldf' + ''', SIZE = 1024KB , FILEGROWTH = 10%) ' exec (@SQL) GO And with that, your database is created.  You can run these scripts on any server and on any database name.  To do that, I created an MSBuild script that looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0"> <PropertyGroup> <DatabaseName>MyDatabase</DatabaseName> <Server>localhost</Server> <SqlCmd>sqlcmd -v DatabaseName=$(DatabaseName) -S $(Server) -i </SqlCmd> <ScriptDirectory>.\Scripts</ScriptDirectory> </PropertyGroup> <Target Name ="Rebuild"> <ItemGroup> <ScriptFiles Include="$(ScriptDirectory)\*.sql"/> </ItemGroup> <Exec Command="$(SqlCmd) &quot;%(ScriptFiles.Identity)&quot;" ContinueOnError="false"/> </Target> </Project> Note that the Scripts directory is underneath the directory where I’m running the msbuild command and is relative to that directory.  Note also that the target is using batching to run each script in the scripts subdirectory, one after the other.  Each script is passed to the sqlcmd command line execution using the .Identity property on the itemgroup that is created.  This target file is saved in the file “Database.target”. To make this work, you’ll need msbuild in your path, and then run the following command: msbuild database.target /target:Rebuild Once you’ve got your virgin database setup, you’d then need to use a tool like dbdeploy.net to determine that it was a virgin database, build a change script based on the change scripts, and then you’d want another sqlcmd call to update the database with the appropriate scripts.  I’m doing that next, so I’ll post a blog update when I’ve got it working. Technorati Tags: MSBuild,Agile,CI,Database

  Read the article

• Silverlight Cream for January 11, 2011 -- #1024

  - by Dave Campbell

  1,000 blogposts is quite a few, but to die-hard geeks, 1000 isn't the number... 1K is the number, and today is my 1K blogpost! I've been working up to this for at least 11 months. Way back at MIX10, I approached some vendors about an idea I had. A month ago I contacted them and others, and everyone I contacted was very generous and supportive of my idea. My idea was not to run a contest, but blog as normal, and whoever ended up on my 1K post would get some swag... and I set a cut-off at 13 posts. So... blogging normally, I had some submittals, and then ran my normal process to pick up the next posts until I hit a total of 13. To provide a distribution channel for the swag, everyone on the list, please send me your snail mail (T-shirts) and email (licenses) addresses as soon as possible.   I'd like to thank the following generous sponsors for their contributions to my fun (in alphabetic order): and Rachel Hawley for contributing 4 Silverlight control sets First Floor Software and Koen Zwikstra for contributing 13 licenses for Silverlight Spy and Sara Faatz/Jason Beres for contributing 13 licenses for Silverlight Data Visualization controls and Svetla Stoycheva for contributing T-Shirts for everyone on the post and Ina Tontcheva for contributing 13 licenses for RadControls for Silverlight + RadControls for Windows Phone and Charlene Kozlan for contributing 1 combopack standard, 2 DataGrid for Silverlight, and 2 Listbox for Silverlight Standard And now finally...in this Issue: Nigel Sampson, Jeremy Likness, Dan Wahlin, Kunal Chowdhurry, Alex Knight, Wei-Meng Lee, Michael Crump, Jesse Liberty, Peter Kuhn, Michael Washington, Tau Sick, Max Paulousky, Damian Schenkelman Above the Fold: Silverlight: "Demystifying Silverlight Dependency Properties" Dan Wahlin WP7: "Using Windows Phone Gestures as Triggers" Nigel Sampson Expression Blend: "PathListBox: making data look cool" Alex Knight From SilverlightCream.com: Using Windows Phone Gestures as Triggers Nigel Sampson blogged about WP7 Gestures, the Toolkit, and using Gestures as Triggers, and actually makes it looks simple :) Jounce Part 9: Static and Dynamic Module Management Jeremy Likness has episode 9 of his explanation of his MVVM framework, Jounce, up... and a big discussion of Modules and Module Management from a Jounce perspective. Demystifying Silverlight Dependency Properties Dan Wahlin takes a page from one of his teaching opportunities, and shares his knowledge of Dependency Properties with us... beginning with what they are, defining them in code, and demonstrating their use. Customizing Silverlight ChildWindow Style using Blend Kunal Chowdhurry has a great post up about getting your Child Windows to match the look & feel of the rest of youra app... plus a bunch of Blend goodness thrown in. PathListBox: making data look cool File this post by Alex Knight in the 'holy crap' file along with the others in this series! ... just check out that cool Ticker Style Path ListBox at the top of the blog... too cool! Web Access in Windows Phone 7 Apps Wei-Meng Lee has the 3rd part of his series on WP7 development up and in this one is discussing Web Access... I mean *discussing* it... tons of detail, code, and explanation... great post. Prevent your Silverlight XAP file from caching in your browser. Michael Crump helps relieve stress on Silverlight developers everywhere by exploring how to avoid caching of your XAP in the browser... (WPFS) MVVM Light Toolkit: Soup To Nuts Part I Jesse Liberty continues his Windows Phone from Scratch series with a new segment exploring Laurent Bugnion's MVVMLight Toolkit beginning with acquiring and installing the toolkit, then proceeds to discuss linking the View and ViewModel, the ViewModel Locator, and page navigation. Silverlight: Making a DateTimePicker Peter Kuhn attacks a problem that crops up on the forums a lot -- a DateTimePicker control for Silverlight... following the "It's so simple to build one yourself" advice, he did so, and provides the code for all of us! Windows Phone 7 Animated Button Press Michael Washington took exception to button presses that gave no visual feedback and produced a behavior that does just that. Using TweetSharp in a Windows Phone 7 app Tau Sick demonstrates using TweetSharp to put a twitter feed into a WP7 app, as he did in "Hangover Helper"... all the instructions from getting Tweeetshaprt to the code necessary. Bindable Application Bar Extensions for Windows Phone 7 Max Paulousky has a post discussing some real extensions to the ApplicationBar for WP7.. he begins with a bindable application bar by Nicolas Humann that I've missed, probably because his blog is in French... and extends it to allow using DelegateCommand. How to: Load Prism modules packaged in a separate XAP file in an OOB application Damian Schenkelman posts about Prism, AppModules in separate XAPs and running OOB... if you've tried this, you know it's a hassle.. Damian has the solution. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• TFS 2010 SDK: Integrating Twitter with TFS Programmatically

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,TFS API,Integrate Twitter TFS,TFS Programming,ALM,TwitterSharp   Friends at ‘Twitter Sharp’ have created a wonderful .net API for twitter. With this blog post i will try to show you a basic TFS – Twitter integration scenario where i will retrieve the Team Project details programmatically and then publish these details on my twitter page. In future blogs i will be demonstrating how to create a windows service to capture the events raised by TFS and then publishing them in your social eco-system. Download Working Demo: Integrate Twitter - Tfs Programmatically   1. Setting up Twitter API Download Tweet Sharp from => https://github.com/danielcrenna/tweetsharp  Before you can start playing around with this, you will need to register an application on twitter. This is because Twitter uses the OAuth authentication protocol and will not issue an Access token unless your application is registered with them. Go to https://dev.twitter.com/ and register your application   Once you have registered your application, you will need ‘Customer Key’, ‘Customer Secret’, ‘Access Token’, ‘Access Token Secret’ 2. Connecting to Twitter using the Tweet Sharp API Create a new C# windows forms project and add reference to ‘Hammock.ClientProfile’, ‘Newtonsoft.Json’, ‘TweetSharp’ Add the following keys to the App.config (Note – The values for the keys below are in correct and if you try and connect using them then you will get an authorization failure error). Add a new class ‘TwitterProxy’ and use the following code to connect to the TwitterService (Read more about OAuthentication - http://dev.twitter.com/pages/auth) using System;using System.Collections.Generic;using System.Linq;using System.Text;using System.Configuration;using TweetSharp; namespace WindowsFormsApplication2{ public class TwitterProxy { private static string _hero; private static string _consumerKey; private static string _consumerSecret; private static string _accessToken; private static string _accessTokenSecret;  public static TwitterService ConnectToTwitter() { _consumerKey = ConfigurationManager.AppSettings["ConsumerKey"]; _consumerSecret = ConfigurationManager.AppSettings["ConsumerSecret"]; _accessToken = ConfigurationManager.AppSettings["AccessToken"]; _accessTokenSecret = ConfigurationManager.AppSettings["AccessTokenSecret"];  return new TwitterService(_consumerKey, _consumerSecret, _accessToken, _accessTokenSecret); } }} Time to Tweet! _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); _twitterService.SendTweet("Hello World"); SendTweet will return the TweetStatus, If you do not get a 200 OK status that means you have failed authentication, please revisit the Access tokens. --RESPONSE: https://api.twitter.com/1/statuses/update.json HTTP/1.1 200 OK X-Transaction: 1308476106-69292-41752 X-Frame-Options: SAMEORIGIN X-Runtime: 0.03040 X-Transaction-Mask: a6183ffa5f44ef11425211f25 Pragma: no-cache X-Access-Level: read-write X-Revision: DEV X-MID: bd8aa0abeccb6efba38bc0a391a73fab98e983ea Cache-Control: no-cache, no-store, must-revalidate, pre-check=0, post-check=0 Content-Type: application/json; charset=utf-8 Date: Sun, 19 Jun 2011 09:35:06 GMT Expires: Tue, 31 Mar 1981 05:00:00 GMT Last-Modified: Sun, 19 Jun 2011 09:35:06 GMT Server: hi Vary: Accept-Encoding Content-Encoding: Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Transfer-Encoding: chunked   3. Integrate with TFS In my blog post Connect to TFS Programmatically i have in depth demonstrated how to connect to TFS using the TFS API. 1: // Update the AppConfig with the URI of the Team Foundation Server you want to connect to, Make sure you have View Team Project Collection Details permissions on the server 2: private static string _myUri = ConfigurationManager.AppSettings["TfsUri"]; 3: private static TwitterService _twitterService = null; 4:   5: private void button1_Click(object sender, EventArgs e) 6: { 7: lblNotes.Text = string.Empty; 8:   9: try 10: { 11: StringBuilder notes = new StringBuilder(); 12:   13: _twitterService = Proxy.TwitterProxy.ConnectToTwitter(); 14:   15: _twitterService.SendTweet("Hello World"); 16:   17: TfsConfigurationServer configurationServer = 18: TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); 19:   20: CatalogNode catalogNode = configurationServer.CatalogNode; 21:   22: ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( 23: new Guid[] { CatalogResourceTypes.ProjectCollection }, 24: false, CatalogQueryOptions.None); 25:   26: // tpc = Team Project Collection 27: foreach (CatalogNode tpcNode in tpcNodes) 28: { 29: Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); 30: TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); 31:   32: notes.AppendFormat("{0} Team Project Collection : {1}{0}", Environment.NewLine, tpc.Name); 33: _twitterService.SendTweet(String.Format("http://Lunartech.codeplex.com - Connecting to Team Project Collection : {0} ", tpc.Name)); 34:   35: // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' 36: var tpNodes = tpcNode.QueryChildren( 37: new Guid[] { CatalogResourceTypes.TeamProject }, 38: false, CatalogQueryOptions.None); 39:   40: foreach (var p in tpNodes) 41: { 42: notes.AppendFormat("{0} Team Project : {1} - {2}{0}", Environment.NewLine, p.Resource.DisplayName,  "This is an open source project hosted on codeplex"); 43: _twitterService.SendTweet(String.Format(" Connected to Team Project: '{0}' – '{1}' ", p.Resource.DisplayName, "This is an open source project hosted on codeplex")); 44: } 45: } 46: notes.AppendFormat("{0} Updates posted on Twitter : {1} {0}", Environment.NewLine, @"http://twitter.com/lunartech1"); 47: lblNotes.Text = notes.ToString(); 48: } 49: catch (Exception ex) 50: { 51: lblError.Text = " Message : " + ex.Message + (ex.InnerException != null ? " Inner Exception : " + ex.InnerException : string.Empty); 52: } 53: }   The extensions you can build integrating TFS and Twitter are incredible!   Share this post :

  Read the article

• Visual Studio Little Wonders: Box Selection

  - by James Michael Hare

  So this week I decided I’d do a Little Wonder of a different kind and focus on an underused IDE improvement: Visual Studio’s Box Selection capability. This is a handy feature that many people still don’t realize was made available in Visual Studio 2010 (and beyond).  True, there have been other editors in the past with this capability, but now that it’s fully part of Visual Studio we can enjoy it’s goodness from within our own IDE. So, for those of you who don’t know what box selection is and what it allows you to do, read on! Sometimes, we want to select beyond the horizontal… The problem with traditional text selection in many editors is that it is horizontally oriented.  Sure, you can select multiple rows, but if you do you will pull in the entire row (at least for the middle rows).  Under the old selection scheme, if you wanted to select a portion of text from each row (a “box” of text) you were out of luck.  Box selection rectifies this by allowing you to select a box of text that bounded by a selection rectangle that you can grow horizontally or vertically.  So let’s think a situation that could occur where this comes in handy. Let’s say, for instance, that we are defining an enum in our code that we want to be able to translate into some string values (possibly to be stored in a database, output to screen, etc.). Perhaps such an enum would look like this: 1: public enum OrderType 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: } 8:  Now, let’s say we are in the process of creating a Dictionary<K,V> to translate our OrderType: 1: var translator = new Dictionary<OrderType, string> 2: { 3: // do I really want to retype all this??? 4: }; Yes the example above is contrived so that we will pull some garbage if we do a multi-line select. I could select the lines above using the traditional multi-line selection: And then paste them into the translator code, which would result in this: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, // buy shares of a commodity 4: Sell, // sell shares of a commodity 5: Exchange, // exchange one commodity for another 6: Cancel, // cancel an order for a commodity 7: }; But I have a lot of junk there, sure I can manually clear it out, or use some search and replace magic, but if this were hundreds of lines instead of just a few that would quickly become cumbersome. The Box Selection Now that we have the ability to create box selections, we can select the box of text to delete!  Most of us are familiar with the fact we can drag the mouse (or hold [Shift] and use the arrow keys) to create a selection that can span multiple rows: Box selection, however, actually allows us to select a box instead of the typical horizontal lines: Then we can press the [delete] key and the pesky comments are all gone! You can do this either by holding down [Alt] while you select with your mouse, or by holding down [Alt+Shift] and using the arrow keys on the keyboard to grow the box horizontally or vertically. So now we have: 1: var translator = new Dictionary<OrderType, string> 2: { 3: Buy, 4: Sell, 5: Exchange, 6: Cancel, 7: }; Which is closer, but we still need an opening curly, the string to translate to, and the closing curly and comma. Fortunately, again, this is easy with box selections due to the fact box selection can even work for a zero-width selection! That is, hold down [Alt] and either drag down with no width, or hold down [Alt+Shift] and arrow down and you will define a selection range with no width, essentially, a vertical line selection: Notice the faint selection line on the right? So why is this useful? Well, just like with any selected range, we can type and it will replace the selection. What does this mean for box selections? It means that we can insert the same text all the way down on each line! If we have the same selection above, and type a curly and a space, we’d get: Imagine doing this over hundreds of lines and think of what a time saver it could be! Now make a zero-width selection on the other side: And type a curly and a comma, and we’d get: So close! Now finally, imagine we’ve already defined these strings somewhere and want to paste them in: 1: const private string BuyText = "Buy Shares"; 2: const private string SellText = "Sell Shares"; 3: const private string ExchangeText = "Exchange"; 4: const private string CancelText = "Cancel"; We can, again, use our box selection to pull out the constant names: And clicking copy (or [CTRL+C]) and then selecting a range to paste into: And finally clicking paste (or [CTRL+V]) to get the final result: 1: var translator = new Dictionary<OrderType, string> 2: { 3: { Buy, BuyText }, 4: { Sell, SellText }, 5: { Exchange, ExchangeText }, 6: { Cancel, CancelText }, 7: };   Sure, this was a contrived example, but I’m sure you’ll agree that it adds myriad possibilities of new ways to copy and paste vertical selections, as well as inserting text across a vertical slice. Summary: While box selection has been around in other editors, we finally get to experience it in VS2010 and beyond. It is extremely handy for selecting columns of information for cutting, copying, and pasting. In addition, it allows you to create a zero-width vertical insertion point that can be used to enter the same text across multiple rows. Imagine the time you can save adding repetitive code across multiple lines!  Try it, the more you use it, the more you’ll love it! Technorati Tags: C#,CSharp,.NET,Visual Studio,Little Wonders,Box Selection

  Read the article

• FAQ: GridView Calculation with JavaScript - Displaying Quantity Total

  - by Vincent Maverick Durano

  Previously we've talked about how calculate the sub-totals and grand total in GridView here, how to format the numbers into a currency format and how to validate the quantity to just accept whole numbers using JavaScript here. One of the users in the forum (http://forums.asp.net) is asking if how to modify the script to display the quantity total in the footer. In this post I'm going to show you how to it. Basically we just need to modify the javascript CalculateTotals function and add the codes there for calculating the quantity total and display it in the footer. Here are the code blocks below:   <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> <script type="text/javascript"> function CalculateTotals() { var gv = document.getElementById("<%= GridView1.ClientID %>"); var tb = gv.getElementsByTagName("input"); var lb = gv.getElementsByTagName("span"); var sub = 0; var total = 0; var indexQ = 1; var indexP = 0; var price = 0; var qty = 0; var totalQty = 0; for (var i = 0; i < tb.length; i++) { if (tb[i].type == "text") { ValidateNumber(tb[i]); price = lb[indexP].innerHTML.replace("$", "").replace(",", ""); sub = parseFloat(price) * parseFloat(tb[i].value); if (isNaN(sub)) { lb[i + indexQ].innerHTML = "0.00"; sub = 0; } else { lb[i + indexQ].innerHTML = FormatToMoney(sub, "$", ",", "."); ; } indexQ++; indexP = indexP + 2; if (isNaN(tb[i].value) || tb[i].value == "") { qty = 0; } else { qty = tb[i].value; } totalQty += parseInt(qty); total += parseFloat(sub); } } lb[lb.length - 2].innerHTML = totalQty; lb[lb.length - 1].innerHTML = FormatToMoney(total, "$", ",", "."); } function ValidateNumber(o) { if (o.value.length > 0) { o.value = o.value.replace(/[^\d]+/g, ''); //Allow only whole numbers } } function isThousands(position) { if (Math.floor(position / 3) * 3 == position) return true; return false; }; function FormatToMoney(theNumber, theCurrency, theThousands, theDecimal) { var theDecimalDigits = Math.round((theNumber * 100) - (Math.floor(theNumber) * 100)); theDecimalDigits = "" + (theDecimalDigits + "0").substring(0, 2); theNumber = "" + Math.floor(theNumber); var theOutput = theCurrency; for (x = 0; x < theNumber.length; x++) { theOutput += theNumber.substring(x, x + 1); if (isThousands(theNumber.length - x - 1) && (theNumber.length - x - 1 != 0)) { theOutput += theThousands; }; }; theOutput += theDecimal + theDecimalDigits; return theOutput; } </script> </head> <body> <form id="form1" runat="server"> <asp:gridview ID="GridView1" runat="server" ShowFooter="true" AutoGenerateColumns="false"> <Columns> <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> <asp:BoundField DataField="Description" HeaderText="Item Description" /> <asp:TemplateField HeaderText="Item Price"> <ItemTemplate> <asp:Label ID="LBLPrice" runat="server" Text='<%# Eval("Price","{0:C}") %>'></asp:Label> </ItemTemplate> <FooterTemplate> <b>Total Qty:</b> </FooterTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="TXTQty" runat="server" onkeyup="CalculateTotals();"></asp:TextBox> </ItemTemplate> <FooterTemplate> <asp:Label ID="LBLQtyTotal" runat="server" Font-Bold="true" ForeColor="Blue" Text="0" ></asp:Label>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <b>Total Amount:</b> </FooterTemplate> </asp:TemplateField> <asp:TemplateField HeaderText="Sub-Total"> <ItemTemplate> <asp:Label ID="LBLSubTotal" runat="server" ForeColor="Green" Text="0.00"></asp:Label> </ItemTemplate> <FooterTemplate> <asp:Label ID="LBLTotal" runat="server" ForeColor="Green" Font-Bold="true" Text="0.00"></asp:Label> </FooterTemplate> </asp:TemplateField> </Columns> </asp:gridview> </form> </body> </html>   Here's the output below when you run it on the page: I hope someone find this post useful! Technorati Tags: ASP.NET,C#,JavaScript,GridView

  Read the article

• Silverlight Cream for December 18, 2010 -- #1012

  - by Dave Campbell

  In this Issue: Mark Monster, Kevin Dockx, Jeremy Likness(-2-,-3-), Timmy Kokke, Den Delimarsky, Mike Snow, Samuel Jack(-2-), and Renuka Prasad(-2-). Above the Fold: Silverlight: "Trigger a Storyboard on ViewModel changes" Mark Monster WP7: "Microsoft Push Notification in Windows Phone 7" Renuka Prasad Shoutouts: SilverlightGal sent me the link to The Silverlight Dossier ... I think it's a pretty good start... additions I'd like to see are ways to submit to the various areas. Michael Crump put up a contest that runs from now to January 1st... Win a set of Infragistics Silverlight Controls with Data Visualization!... pretty cool, Michael! If you visit WynApse.com, you'll see I have a subscription to LearnVisualStudio.net... and now they have posted a batch of WP7 videos... 64 of them to be exact... wow!: New video series From SilverlightCream.com: Trigger a Storyboard on ViewModel changes Mark Monster has a great post up about triggering Storyboard on ViewModel changes using the DataTrigger from Blend... cool stuff, and you can also do GoToStateAction or other actions or build yourowndang Trigger Action... fun awaits! ... sorry it took a while to post, Mark... been a tad overloaded here! Working with the Silverlight Rich Text Box control Kevin Dockx has had a post up for a while at SilverlightShow where he takes a good look at the RichText control and it's various capabilities, including source so you can give it a dance yourself. Lessons Learned in Personal Web Page Part 3: Custom Panel and Listbox Jeremy Likness's part 3 of his Personal Web Page lessons learned is covering the tres-cool 3D Panel he did... and he's got it all explained out... building from scratch via a custom panel and a Listbox control... A Silverlight MVVM Feed Reader from Scratch in 30 Minutes Jeremy Likness has a video tutorial showing building an MVVM/Silverlight feedreader in 30 minutes ... plus a couple mods that he noticed after the fact... beat that HTML5 :) Jounce Part 8: Raising Property Changed In Jeremy Likness's latest post, he has number 8 in his series on his MVVM platform, Jounce. This time he's explaining the property changed notification, has a very cool way of doing it, and some interesting comments from readers. Dependency Injection, MVVM, Ninject and Silverlight Timmy Kokke has a great tutorial up with associated demo project on Dependency Injection in MVVM and Silverlight. Some hidden features in the Windows Phone 7 emulator Den Delimarsky shows how to get some of the hidden features on your WP7 emulator like the Call History, Call Settings, and Details about the numbers. Playing sound effects on Windows Phone 7 Mike Snow's latest tip is playing sound effects on your WP7 ... a little bit of XNA here and there, and badabing, badaboom, you got sound! Day 3 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack has a couple more posts up about his 'Build a WP7 game in 3 Days' challenge... first up is Day 3 from 8:50 to 22:30 ... wow... long day! ... but he's got something good going now... some good external links also Day 3.5 of my “Build a Windows Phone 7 game in 3 days” Challenge Samuel Jack's 3rd day ended with another half-day added on to put on some finishing touches... again, some good external links... and he finished with this Say hello to Simon Squared, my 3.5 day old WP7 Game Microsoft Push Notification in Windows Phone 7 Renuka Prasad has a bunch of material up that I've not been aware of (how did that happen, people??) ... here's the first of a couple of his posts on Code Project ... a very nice tutorial on the Push Notification process... great diagrams and external links. Windows Phone 7 – Toast Notification Using Windows Azure Cloud Service Renuka Prasad has another WP7 post on CodeProject... this one on Toast Notification... and he's using Azure and WCF all rolled into it as well... great diagrams, descriptions and all the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• ResponseStatusLine protocol violation

  - by Tom Hines

  I parse/scrape a few web page every now and then and recently ran across an error that stated: "The server committed a protocol violation. Section=ResponseStatusLine".   After a few web searches, I found a couple of suggestions – one of which said the problem could be fixed by changing the HttpWebRequest ProtocolVersion to 1.0 with the command: 1: HttpWebRequest req = (HttpWebRequest)HttpWebRequest.Create(strURI); 2: req.ProtocolVersion = HttpVersion.Version10;   …but that did not work in my particular case.   What DID work was the next suggestion I found that suggested the use of the setting: “useUnsafeHeaderParsing” either in the app.config file or programmatically. If added to the app.config, it would be: 1: <!-- after the applicationSettings --> 2: <system.net> 3: <settings> 4: <httpWebRequest useUnsafeHeaderParsing ="true"/> 5: </settings> 6: </system.net>   If done programmatically, it would look like this: C++: 1: // UUHP_CPP.h 2: #pragma once 3: using namespace System; 4: using namespace System::Reflection; 5:   6: namespace UUHP_CPP 7: { 8: public ref class CUUHP_CPP 9: { 10: public: 11: static bool UseUnsafeHeaderParsing(String^% strError) 12: { 13: Assembly^ assembly = Assembly::GetAssembly(System::Net::Configuration::SettingsSection::typeid); //__typeof 14: if (nullptr==assembly) 15: { 16: strError = "Could not access Assembly"; 17: return false; 18: } 19:   20: Type^ type = assembly->GetType("System.Net.Configuration.SettingsSectionInternal"); 21: if (nullptr==type) 22: { 23: strError = "Could not access internal settings"; 24: return false; 25: } 26:   27: Object^ obj = type->InvokeMember("Section", 28: BindingFlags::Static | BindingFlags::GetProperty | BindingFlags::NonPublic, 29: nullptr, nullptr, gcnew array<Object^,1>(0)); 30:   31: if(nullptr == obj) 32: { 33: strError = "Could not invoke Section member"; 34: return false; 35: } 36:   37: FieldInfo^ fi = type->GetField("useUnsafeHeaderParsing", BindingFlags::NonPublic | BindingFlags::Instance); 38: if(nullptr == fi) 39: { 40: strError = "Could not access useUnsafeHeaderParsing field"; 41: return false; 42: } 43:   44: if (!(bool)fi->GetValue(obj)) 45: { 46: fi->SetValue(obj, true); 47: } 48:   49: return true; 50: } 51: }; 52: } C# (CSharp): 1: using System; 2: using System.Reflection; 3:   4: namespace UUHP_CS 5: { 6: public class CUUHP_CS 7: { 8: public static bool UseUnsafeHeaderParsing(ref string strError) 9: { 10: Assembly assembly = Assembly.GetAssembly(typeof(System.Net.Configuration.SettingsSection)); 11: if (null == assembly) 12: { 13: strError = "Could not access Assembly"; 14: return false; 15: } 16:   17: Type type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal"); 18: if (null == type) 19: { 20: strError = "Could not access internal settings"; 21: return false; 22: } 23:   24: object obj = type.InvokeMember("Section", 25: BindingFlags.Static | BindingFlags.GetProperty | BindingFlags.NonPublic, 26: null, null, new object[] { }); 27:   28: if (null == obj) 29: { 30: strError = "Could not invoke Section member"; 31: return false; 32: } 33:   34: // If it's not already set, set it. 35: FieldInfo fi = type.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic | BindingFlags.Instance); 36: if (null == fi) 37: { 38: strError = "Could not access useUnsafeHeaderParsing field"; 39: return false; 40: } 41:   42: if (!Convert.ToBoolean(fi.GetValue(obj))) 43: { 44: fi.SetValue(obj, true); 45: } 46:   47: return true; 48: } 49: } 50: }   F# (FSharp): 1: namespace UUHP_FS 2: open System 3: open System.Reflection 4: module CUUHP_FS = 5: let UseUnsafeHeaderParsing(strError : byref<string>) : bool = 6: // 7: let assembly : Assembly = Assembly.GetAssembly(typeof<System.Net.Configuration.SettingsSection>) 8: if (null = assembly) then 9: strError <- "Could not access Assembly" 10: false 11: else 12: 13: let myType : Type = assembly.GetType("System.Net.Configuration.SettingsSectionInternal") 14: if (null = myType) then 15: strError <- "Could not access internal settings" 16: false 17: else 18: 19: let obj : Object = myType.InvokeMember("Section", BindingFlags.Static ||| BindingFlags.GetProperty ||| BindingFlags.NonPublic, null, null, Array.zeroCreate 0) 20: if (null = obj) then 21: strError <- "Could not invoke Section member" 22: false 23: else 24: 25: // If it's not already set, set it. 26: let fi : FieldInfo = myType.GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic ||| BindingFlags.Instance) 27: if(null = fi) then 28: strError <- "Could not access useUnsafeHeaderParsing field" 29: false 30: else 31: 32: if (not(Convert.ToBoolean(fi.GetValue(obj)))) then 33: fi.SetValue(obj, true) 34: 35: // Now return true 36: true VB (Visual Basic): 1: Option Explicit On 2: Option Strict On 3: Imports System 4: Imports System.Reflection 5:   6: Public Class CUUHP_VB 7: Public Shared Function UseUnsafeHeaderParsing(ByRef strError As String) As Boolean 8:   9: Dim assembly As [Assembly] 10: assembly = [assembly].GetAssembly(GetType(System.Net.Configuration.SettingsSection)) 11:   12: If (assembly Is Nothing) Then 13: strError = "Could not access Assembly" 14: Return False 15: End If 16:   17: Dim type As Type 18: type = [assembly].GetType("System.Net.Configuration.SettingsSectionInternal") 19: If (type Is Nothing) Then 20: strError = "Could not access internal settings" 21: Return False 22: End If 23:   24: Dim obj As Object 25: obj = [type].InvokeMember("Section", _ 26: BindingFlags.Static Or BindingFlags.GetProperty Or BindingFlags.NonPublic, _ 27: Nothing, Nothing, New [Object]() {}) 28:   29: If (obj Is Nothing) Then 30: strError = "Could not invoke Section member" 31: Return False 32: End If 33:   34: ' If it's not already set, set it. 35: Dim fi As FieldInfo 36: fi = [type].GetField("useUnsafeHeaderParsing", BindingFlags.NonPublic Or BindingFlags.Instance) 37: If (fi Is Nothing) Then 38: strError = "Could not access useUnsafeHeaderParsing field" 39: Return False 40: End If 41:   42: If (Not Convert.ToBoolean(fi.GetValue(obj))) Then 43: fi.SetValue(obj, True) 44: End If 45:   46: Return True 47: End Function 48: End Class   Technorati Tags: C++,CPP,VB,Visual Basic,F#,FSharp,C#,CSharp,ResponseStatusLine,protocol violation

  Read the article

• Adventures in Scrum: Lesson 1 &ndash; The failed Sprint

  - by Martin Hinshelwood

  I recently had a conversation with a product owner that wanted to have the Scrum team broken up into smaller units so that less time was wasted on the Scrum Ceremonies! Their complaint was around the need in Scrum to have the entire “Team” (7+-2) involved in the sizing of the work during the “Sprint Planning Meeting”.  The standard flippant answer of all Scrum professionals, “Well that's not Scrum”, does not get you any brownie points in these situations. The response could be “Well we are not doing Scrum then” which in turn leads to “We are doing Scrum…But, we have split the scrum team into units of 2/3 so that they can concentrate on a specific area of work”. While this may work, it is not Scrum and should not be called so… It is just a form of Agile. Don’t get me wrong at this stage, there is nothing wrong with Agile, just don’t call it Scrum. The reason that the Product Owner wants to do this is that, in effect, through a number of miscommunications and failings in our implementation of Scrum, there was NO unit of potentially Shippable software at the end of the first sprint. It does not matter to them that most Scrum teams will fail the first Sprint, even those that are high performing teams. Remember it is the product owners their money! We should NOT break up scrum teams into smaller units for the purpose of having less people tied up in the Scrum Ceremonies. The amount of backlog the Team selects is solely up to the Team… Only the Team can assess what it can accomplish over the upcoming Sprint. - Scrum Guide, Scrum.org The entire team must accept the work and in order to understand what they can accept they must be free to size it as a team. This both encourages common understanding and increases visibility on why team members think a task is of a particular size. This has the benefit of increasing the knowledge of the entire team in the problem domain. A new Team often first realizes that it will either sink or swim as a Team, not individually, in this meeting. The Team realizes that it must rely on itself. As it realizes this, it starts to self-organize to take on the characteristics and behaviour of a real Team. - Scrum Guide, Scrum.org This paragraph goes to the why of having the whole team at the meeting; The goal of Scrum it to produce a unit of potentially shippable software at the end of every Sprint. In order to achieve this we need high performing teams and this is what Scrum as a framework has been optimised to produce. I think that our Product Owner is understandably upset over loosing two weeks work and is losing sight the end goal of Scrum in the failures of the moment. As the man spending the money, I completely understand his perspective and I think that we should not have started Scrum on an internal project, but selected a customer  that is open to the ideas and complications of Scrum. So, what should we have NOT done on our first Scrum project: Should not have had 3 interns as the only on site resource – This lead to bad practices as the experienced guys were not there helping and correcting as they usually would. Should not have had the only experienced guys offsite – With both the experienced technical guys in completely different time zones it was difficult to get time for questions. Helping the guys on site was just plain impossible. Should not have used a part time ScrumMaster – Although the ScrumMaster attended all of the Ceremonies, because they are only in 2 full days of the week it makes it difficult for the team to raise impediments as they go. Should not have used a proxy product owner. – This was probably the worst decision that was made. Mainly because the proxy product owner did not have the same vision as the product owner. While Scrum does not explicitly reject the idea of a Proxy Product Owner, I do not think it works very well in practice. The “single wringable neck” needs to contain both the Money and the Vision as well as attending the required meetings. I will be brining all of these things up at the Sprint Retrospective and we will learn from our mistakes and move on. Do, Inspect then Adapt…   Technorati Tags: Scrum,Sprint Planing,Sprint Retrospective,Scrum.org,Scrum Guide,Scrum Ceremonies,Scrummaster,Product Owner Need Help? Professional Scrum Developer Training SSW has six Professional Scrum Developer Trainers who specialise in training your developers in implementing Scrum with Microsoft's Visual Studio ALM tools.

  Read the article

• Oracle Fusion Middleware 11g next launch phase - what a week of product releases! Feedback from our

  - by Jürgen Kress

    Product releases: SOA Suite 11gR1 Patch Set 2 (PS2) BPM Suite 11gR1 Released Oracle JDeveloper 11g (11.1.1.3.0) (Build 5660) Oracle WebLogic Server 11gR1 (10.3.3) Oracle JRockit (4.0) Oracle Tuxedo 11gR1 (11.1.1.1.0) Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86/x86-64 All Oracle Fusion Middleware 11gR1 Software Download   BPM Suite 11gR1 Released by Manoj Das Oracle BPM Suite 11gR1 became available for download from OTN and eDelivery. If you have been following our plans in this area, you know that this is the release unifying BEA ALBPM product, which became Oracle BPM10gR3, with the Oracle stack. Some of the highlights of this release are: BPMN 2.0 modeling and simulation Web based Process Composer for BPMN and Rules authoring Zero-code environment with full access to Oracle SOA Suite’s rich set of application and other adapters Process Spaces – Out-of-box integration with Web Center Suite Process Analytics – Native process cubes as well as integration with Oracle BAM You can learn more about this release from the documentation. Notes about downloading and installing Please note that Oracle BPM Suite 11gR1 is delivered and installed as part of SOA 11.1.1.3.0, which is a sparse release (only incremental patch). To install: Download and install SOA 11.1.1.2.0, which is a full release (you can find the bits at the above location) Download and install SOA 11.1.1.3.0 During configure step (using the Fusion Middleware configuration wizard), use the Oracle Business Process Management template supplied with the SOA Suite11g (11.1.1.3.0) If you plan to use Process Spaces, also install Web Center 11.1.1.3.0, which also is delivered as a sparse release and needs to be installed on top of Web Center 11.1.1.2.0   SOA Suite 11gR1 Patch Set 2 (PS2) released by Demed L'Her We just released SOA Suite 11gR1 Patch Set 2 (PS2)! You can download it as usual from: OTN (main platforms only) eDelivery (all platforms) 11gR1 PS2 is delivered as a sparse installer, that is to say that it is meant to be applied on the latest full install (11gR1 PS1). That’s great for existing PS1 users who simply need to apply the patch and run the patch assistant – but an extra step for new users who will first need to download SOA Suite 11gR1 PS1 (in addition to the PS2 patch). What’s in that release? Bug fixes of course but also several significant new features. Here is a short selection of the most significant ones: Spring component (for native Java extensibility and integration) SOA Partitions (to organize and manage your composites) Direct Binding (for transactional invocations to and from Oracle Service Bus) HTTP binding (for those of you trying to do away with SOAP and looking for simple GET and POST) Resequencer (for ordering out-of-order messages) WS Atomic Transactions (WS-AT) support (for propagation of transactions across heterogeneous environments) Check out the complete list of new features in PS2 for more (including links to the documentation for the above)! But maybe even more importantly we are also releasing Oracle Service Bus 11gR1 and BPM Suite 11gR1 at the same time – all on the same base platform (WebLogic Server 10.3.3)! (NB: it might take a while for all pages and caches to be updated with the new content so if you don’t find what you need today, try again soon!)   Are you Systems Integrations and Independent Software Vendors ready to adopt and to deliver? Make sure that you become trained: Local training calendars Register for the SOA Partner Community & Webcast www.oracle.com/goto/emea/soa What is your feedback?  Who installed the software? please feel free to share your experience at http://twitter.com/soacommunity #soacommunity Technorati Tags: SOA partner community ACE Directoris SOA Suite PS2 BPM11g First feedback from our ACE Directors and key Partners:   Now, these are great times to start the journey into BPM! Hajo Normann Reuse of components across the Oracle 11G Fusion Middleware stack, BPM just is one of the components plugging into the stack and reuses all other components. Mr. Leon Smiers With BPM11g, Oracle offers a very competitive product which will have a big effect on the IT market. Guido Schmutz We have real BPMN 2.0, which get's executed. No more transformation from business models to executable models - just press the run button... Torsten Winterberg Oracle BPM Suite 11g brings Out-of-box integration with WebCenter Suite and Oracle ADF development framework. Andrejus Baranovskis With the release of BPM Suite 11g, Oracle has defined new standards for Business Process platforms. Geoffroy de Lamalle With User Messaging Service you can let Soa Suite 11g do all your Messaging Edwin Biemond

  Read the article

• Cowboy Agile?

  - by Robert May

  In a previous post, I outlined the rules of Scrum.  This post details one of those rules. I’ve often heard similar phrases around Scrum that clue me in to someone who doesn’t understand Scrum.  The phrases go something like this: “We don’t do Agile because the idea of letting people just do whatever they want is wrong.  We believe in a more structured approach.” (i.e. Work is Prison, and I’m the Warden!) “I love Agile.  Agile lets us do whatever we want!” (Cowboy Agile?) “We’re Agile, but we use a process that I’ve created.” (Cowboy Agile?) All of those phrases have one thing in common:  The assumption that Agile, and I mean Scrum, lets you do whatever you want.  This is simply not true. Executing Scrum properly requires more dedication, rigor, and diligence than happens in most traditional development methods. Scrum and Waterfall Compared Since Scrum and Waterfall are two of the most commonly used methodologies, a little bit of contrasting and comparing is in order. Waterfall Scrum A project manager defines all tasks and then manages the tasks that team members are working on. The team members define the tasks and estimates of the stories for the current iteration.  Any team member may work on any task in the iteration. Usually only a few milestones that need to be met, the milestones are measured in months, and these milestones are expected to be missed.  Little work is ever done to improve estimates and poor estimators can hide behind high estimates. Stories must be delivered every iteration, milestones are measured in hours, and the team is expected to figure out why their estimates were wrong, even when they were under.  Repeated misses can get the entire team fired. Partially completed work is normal. Partially completed work doesn’t count. Nobody knows the task you’re working on. Everyone knows what you’re working on, whether or not you’re making progress and how much longer you think its going to take, in hours. Little requirement to show working code.  Prototypes are ok. Working code must be shown each iteration.  No smoke and mirrors allowed.  Testing is done in lengthy cycles at the end of development.  Developers aren’t held accountable. Testing is part of the team.  If the testers don’t accept the story as complete, the team can’t count it.  Complete means that the story’s functionality works as designed.  The team can’t have any open defects on the story. Velocity is rarely truly measured and difficult to evaluate. Velocity is integral to the process and can be seen at a glance and everyone in the company knows what it is. A business analyst writes requirements.  Designers mock up screens.  Developers hide behind “I did it just like the spec doc told me to and made the screen exactly like the picture” Developers are expected to collaborate in real time.  If a design is bad or lacks needed details, the developers are required to get it right in the iteration, because all software must be functional.  Designers and Business Analysts are part of the team and must do their work in iterations slightly ahead of the developers. Upper Management is often surprised.  “You told me things were going well two months ago!” Management receives updates at the end of every iteration showing them exactly what the team did and how that compares to what' is remaining in the backlog.  Managers know every iteration what their money is buying. Status meetings are rare or don’t occur.  Email is a primary form of communication. Teams coordinate every single day with each other and use other high bandwidth communication channels to make sure they’re making progress.  Email is used only as a last resort.  Instead, team members stand up, walk to each other, and talk, face to face.  If that’s not possible, they pick up the phone. IF someone asks what happened, its at the end of a lengthy development cycle measured in months, and nobody really knows why it happened. Someone asks what happened every iteration.  The team talks about what happened, and then adapts to make sure that what happened either never happens again or happens every time.   That’s probably enough for now.  As you can see, a lot is required of Scrum teams! One of the key differences in Scrum is that the burden for many activities is shifted to a group of people who share responsibility, instead of a single person having responsibility.  This is a very good thing, since small groups usually come up with better and more insightful work than single individuals.  This shift also results in better velocity.  Team members can take vacations and the rest of the team simply picks up the slack.  With Waterfall, if a key team member takes a vacation, delays can ensue. Scrum requires much more out of every team member and as a result, Scrum teams outperform non-Scrum teams working 60 hour weeks. Recommended Reading Everyone considering Scrum should read Mike Cohn’s excellent book, User Stories Applied. Technorati Tags: Agile,Scrum,Waterfall

  Read the article

• Guidance: How to layout you files for an Ideal Solution

  - by Martin Hinshelwood

  Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

  Read the article

• C#/.NET Little Wonders &ndash; Cross Calling Constructors

  - by James Michael Hare

  Just a small post today, it’s the final iteration before our release and things are crazy here!  This is another little tidbit that I love using, and it should be fairly common knowledge, yet I’ve noticed many times that less experienced developers tend to have redundant constructor code when they overload their constructors. The Problem – repetitive code is less maintainable Let’s say you were designing a messaging system, and so you want to create a class to represent the properties for a Receiver, so perhaps you design a ReceiverProperties class to represent this collection of properties. Perhaps, you decide to make ReceiverProperties immutable, and so you have several constructors that you can use for alternative construction: 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: { 13: ReceiverType = receiverType; 14: Source = source; 15: IsDurable = isDurable; 16: IsBuffered = true; 17: } 18:  19: // Constructs a set of receiver properties with buffering on and durability off. 20: public ReceiverProperties(ReceiverType receiverType, string source) 21: { 22: ReceiverType = receiverType; 23: Source = source; 24: IsDurable = false; 25: IsBuffered = true; 26: } Note: keep in mind this is just a simple example for illustration, and in same cases default parameters can also help clean this up, but they have issues of their own. While strictly speaking, there is nothing wrong with this code, logically, it suffers from maintainability flaws.  Consider what happens if you add a new property to the class?  You have to remember to guarantee that it is set appropriately in every constructor call. This can cause subtle bugs and becomes even uglier when the constructors do more complex logic, error handling, or there are numerous potential overloads (especially if you can’t easily see them all on one screen’s height). The Solution – cross-calling constructors I’d wager nearly everyone knows how to call your base class’s constructor, but you can also cross-call to one of the constructors in the same class by using the this keyword in the same way you use base to call a base constructor. 1: // Constructs a set of receiver properties. 2: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable, bool isBuffered) 3: { 4: ReceiverType = receiverType; 5: Source = source; 6: IsDurable = isDurable; 7: IsBuffered = isBuffered; 8: } 9: 10: // Constructs a set of receiver properties with buffering on by default. 11: public ReceiverProperties(ReceiverType receiverType, string source, bool isDurable) 12: : this(receiverType, source, isDurable, true) 13: { 14: } 15:  16: // Constructs a set of receiver properties with buffering on and durability off. 17: public ReceiverProperties(ReceiverType receiverType, string source) 18: : this(receiverType, source, false, true) 19: { 20: } Notice, there is much less code.  In addition, the code you have has no repetitive logic.  You can define the main constructor that takes all arguments, and the remaining constructors with defaults simply cross-call the main constructor, passing in the defaults. Yes, in some cases default parameters can ease some of this for you, but default parameters only work for compile-time constants (null, string and number literals).  For example, if you were creating a TradingDataAdapter that relied on an implementation of ITradingDao which is the data access object to retreive records from the database, you might want two constructors: one that takes an ITradingDao reference, and a default constructor which constructs a specific ITradingDao for ease of use: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: { 10: _tradingDao = new SqlTradingDao(); 11:  12: // same constructor logic as above 13: }   As you can see, this isn’t something we can solve with a default parameter, but we could with cross-calling constructors: 1: public TradingDataAdapter(ITradingDao dao) 2: { 3: _tradingDao = dao; 4:  5: // other constructor logic 6: } 7:  8: public TradingDataAdapter() 9: : this(new SqlTradingDao()) 10: { 11: }   So in cases like this where you have constructors with non compiler-time constant defaults, default parameters can’t help you and cross-calling constructors is one of your best options. Summary When you have just one constructor doing the job of initializing the class, you can consolidate all your logic and error-handling in one place, thus ensuring that your behavior will be consistent across the constructor calls. This makes the code more maintainable and even easier to read.  There will be some cases where cross-calling constructors may be sub-optimal or not possible (if, for example, the overloaded constructors take completely different types and are not just “defaulting” behaviors). You can also use default parameters, of course, but default parameter behavior in a class hierarchy can be problematic (default values are not inherited and in fact can differ) so sometimes multiple constructors are actually preferable. Regardless of why you may need to have multiple constructors, consider cross-calling where you can to reduce redundant logic and clean up the code.   Technorati Tags: C#,.NET,Little Wonders

  Read the article

• Planning an Event&ndash;SPS NYC

  - by MOSSLover

  I bet some of you were wondering why I am not going to any events for the most part in June and July (aside from volunteering at SPS Chicago).  Well I basically have no life for the next 2 months.  We are approaching the 11th hour of SharePoint Saturday New York City.  The event is slated to have 350 to 400 attendees.  This is second year in a row I’ve helped run it with Jason Gallicchio.  It’s amazingly crazy how much effort this event requires versus Kansas City.  It’s literally 2x the volume of attendees, speakers, and sponsors plus don’t even get me started about volunteers.  So here is a bit of the break down… We have 30 volunteers+ that Tasha Scott from the Hampton Roads Area will be managing the day of the event to do things like timing the speakers, handing out food, making sure people don’t walk into the event that did not sign up until we get a count for fire code, registering people, watching the sharpees, watching the prizes, making sure attendees get to the right place,  opening and closing the partition in the big room, moving chairs, moving furniture, etc…Then there is Jason, Greg, and I who will be making sure that the speakers, sponsors, and everything is going smoothly in the background.  We need to make sure that everything is setup properly and in the right spot.  We also need to make sure signs are printed, schedules are created, bags are stuffed with sponsor material.  Plus we need to send out emails to sponsors reminding them to send us the right information to post on the site for charity sessions, send us boxes with material to stuff bags, and we need to make sure that Michael Lotter gets there information for invoicing.  We also need to check that Michael has invoiced everyone and who has paid, because we can’t order anything for the event without money.  Once people have paid we need to setup food orders, speaker and volunteer dinners, buy prizes, buy bags, buy speakers/volunteer/organizer shirts, etc…During this process we need all the abstracts from speakers, all the bios, pictures, shirt sizes, and other items so we can create schedules and order items.  We also need to keep track of who is attending the dinner the night before for volunteers and speakers and make sure we don’t hit capacity.  Then there is attendee tracking and making sure that we don’t hit too many attendees.  We need to make sure that attendees know where to go and what to do.  We have to make all kinds of random supply lists during this process and keep on track with a variety of lists and emails plus conference calls.  All in all it’s a lot of work and I am trying to keep track of it all the top so that we don’t duplicate anything or miss anything.  So basically all in all if you don’t see me around for another month don’t worry I do exist. Right now if you look at what I’m doing I am traveling every Monday morning and Thursday night back and forth to Washington DC from New Jersey.  Every night I am working on organizational stuff for SharePoint Saturday New York City.  Every Tuesday night we are running an event conference call.  Every weekend I am either with family or my boyfriend and cat trying hard not to touch the event.  So all my time is pretty much work, event, and family/boyfriend.  I have 0 bandwidth for anything in the community.  If you compound that with my severe allergy problems in DC and a doctor’s appointment every month plus a new med once a week I’m lucky I am still standing and walking.  So basically once July 30th hits hopefully Jason Gallicchio, Greg Hurlman, and myself will be able to breathe a little easier.  If I forget to do this thank you Greg and Jason.  Thank you Tom Daly.  Thank you Michael Lotter.  Thank you Tasha Scott.  Thank you Kevin Griffin.  Thank you all the volunteers, speakers, sponsors, and attendees who will and have made this event a success.  Hopefully, we have enough time until next year to regroup, recharge, and make the event grow bigger in a different venue.  Awesome job everyone we sole out within 3 days of registration and we still have several weeks to go.  Right now the waitlist is at 49 people with room to grow.  If you attend the event thank all these guys I mentioned above for making it possible.  It’s going to be awesome I know it but I probably won’t remember half of it due to the blur of things that we will all be taking care of the day of the event.  Catch you all in the end of July/Early August where I will attempt to post something useful and clever and possibly while wearing a fez. Technorati Tags: SPS NYC,SharePoint Saturday,SharePoint Saturday New York City

  Read the article

• C#/.NET Little Wonders: Static Char Methods

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Often times in our code we deal with the bigger classes and types in the BCL, and occasionally forgot that there are some nice methods on the primitive types as well.  Today we will discuss some of the handy static methods that exist on the char (the C# alias of System.Char) type. The Background I was examining a piece of code this week where I saw the following: 1: // need to get the 5th (offset 4) character in upper case 2: var type = symbol.Substring(4, 1).ToUpper(); 3:  4: // test to see if the type is P 5: if (type == "P") 6: { 7: // ... do something with P type... 8: } Is there really any error in this code?  No, but it still struck me wrong because it is allocating two very short-lived throw-away strings, just to store and manipulate a single char: The call to Substring() generates a new string of length 1 The call to ToUpper() generates a new upper-case version of the string from Step 1. In my mind this is similar to using ToUpper() to do a case-insensitive compare: it isn’t wrong, it’s just much heavier than it needs to be (for more info on case-insensitive compares, see #2 in 5 More Little Wonders). One of my favorite books is the C++ Coding Standards: 101 Rules, Guidelines, and Best Practices by Sutter and Alexandrescu.  True, it’s about C++ standards, but there’s also some great general programming advice in there, including two rules I love:         8. Don’t Optimize Prematurely         9. Don’t Pessimize Prematurely We all know what #8 means: don’t optimize when there is no immediate need, especially at the expense of readability and maintainability.  I firmly believe this and in the axiom: it’s easier to make correct code fast than to make fast code correct.  Optimizing code to the point that it becomes difficult to maintain often gains little and often gives you little bang for the buck. But what about #9?  Well, for that they state: “All other things being equal, notably code complexity and readability, certain efficient design patterns and coding idioms should just flow naturally from your fingertips and are no harder to write then the pessimized alternatives. This is not premature optimization; it is avoiding gratuitous pessimization.” Or, if I may paraphrase: “where it doesn’t increase the code complexity and readability, prefer the more efficient option”. The example code above was one of those times I feel where we are violating a tacit C# coding idiom: avoid creating unnecessary temporary strings.  The code creates temporary strings to hold one char, which is just unnecessary.  I think the original coder thought he had to do this because ToUpper() is an instance method on string but not on char.  What he didn’t know, however, is that ToUpper() does exist on char, it’s just a static method instead (though you could write an extension method to make it look instance-ish). This leads me (in a long-winded way) to my Little Wonders for the day… Static Methods of System.Char So let’s look at some of these handy, and often overlooked, static methods on the char type: IsDigit(), IsLetter(), IsLetterOrDigit(), IsPunctuation(), IsWhiteSpace() Methods to tell you whether a char (or position in a string) belongs to a category of characters. IsLower(), IsUpper() Methods that check if a char (or position in a string) is lower or upper case ToLower(), ToUpper() Methods that convert a single char to the lower or upper equivalent. For example, if you wanted to see if a string contained any lower case characters, you could do the following: 1: if (symbol.Any(c => char.IsLower(c))) 2: { 3: // ... 4: } Which, incidentally, we could use a method group to shorten the expression to: 1: if (symbol.Any(char.IsLower)) 2: { 3: // ... 4: } Or, if you wanted to verify that all of the characters in a string are digits: 1: if (symbol.All(char.IsDigit)) 2: { 3: // ... 4: } Also, for the IsXxx() methods, there are overloads that take either a char, or a string and an index, this means that these two calls are logically identical: 1: // check given a character 2: if (char.IsUpper(symbol[0])) { ... } 3:  4: // check given a string and index 5: if (char.IsUpper(symbol, 0)) { ... } Obviously, if you just have a char, then you’d just use the first form.  But if you have a string you can use either form equally well. As a side note, care should be taken when examining all the available static methods on the System.Char type, as some seem to be redundant but actually have very different purposes.  For example, there are IsDigit() and IsNumeric() methods, which sound the same on the surface, but give you different results. IsDigit() returns true if it is a base-10 digit character (‘0’, ‘1’, … ‘9’) where IsNumeric() returns true if it’s any numeric character including the characters for ½, ¼, etc. Summary To come full circle back to our opening example, I would have preferred the code be written like this: 1: // grab 5th char and take upper case version of it 2: var type = char.ToUpper(symbol[4]); 3:  4: if (type == 'P') 5: { 6: // ... do something with P type... 7: } Not only is it just as readable (if not more so), but it performs over 3x faster on my machine:    1,000,000 iterations of char method took: 30 ms, 0.000050 ms/item.    1,000,000 iterations of string method took: 101 ms, 0.000101 ms/item. It’s not only immediately faster because we don’t allocate temporary strings, but as an added bonus there less garbage to collect later as well.  To me this qualifies as a case where we are using a common C# performance idiom (don’t create unnecessary temporary strings) to make our code better. Technorati Tags: C#,CSharp,.NET,Little Wonders,char,string

  Read the article

• Silverlight Cream Monday WP7 App Review # 1

  - by Dave Campbell

  I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• 2011 The Year of Awesomesauce

  - by MOSSLover

  So I was talking to one of my friends, Cathy Dew, and I’m wondering how to start out this post.  What kind of title should I put?  Somehow we’re just randomly throwing things out and this title pops into my head the one you see above. I woke up today to the buzz of a text message.  I spent New Years laying around until 3 am watching Warehouse 13 Episodes and drinking champagne.  It was one of the best New Year’s I spent with my boyfriend and my cat.  I figured I would sleep in until Noon, but ended up waking up around 11:15 to that text message buzz.  I guess my DE, Rachel Appel, had texted me “Happy New Years”, because Rachel is that kind of person.  I immediately proceeded to check my email.  I noticed my live account had a hit.  The account I rarely ever use had an email.  I sort of had that sinking suspicion I was going to get Silverlight MVP right?  So I open the email and something out of the blue happens it says “blah blah blah SharePoint Server MVP blah blah…”.  I’m sitting here a little confused what?  Really?  Just about when you give up on something the unexplained happens.  I am grateful for what I have every day. So let me tell you a story.  I was a senior in high school and it was December 31st, 1999.  A couple days prior my grandmother was complaining she had a cold and her assisted living facility was not going to let her see a doctor.  She claimed to be very sick.  New Year’s Eve Day 1999 my grandmother was rushed to the hospital sometime very early in the morning.  My uncle, my little brother, and myself were sitting in the waiting room eagerly awaiting news.  The Sydney Opera House was playing in the background as New Years 2000 for Australia was ringing in.  They come out and they tell us my grandmother has pneumonia.  She is in the ICU in critical condition.  Eventually time passes in the day and my parents take my brother and I home.  So in the car we had a huge fight that ended in the worst new years of my life.  The next 30 days were the worst 30 days of my life.  I went to the hospital every single day to do my homework and watch my grandmother.  Each day was a challenge mentally and physically as my grandmother berated me in her demented state.  On the 30th day my grandmother ended up in critical condition in the ICU maxed out on painkillers.  At approximately 3 am I hear my parents telling me they don’t want to wake me up and that my grandmother had passed away.  I must have cried more collectively that day than any other day in my life.  Every New Years Even since I have cried thinking about who she was and what she represented.  She was human looking back she wasn’t anything great, but she was one of the positive lights in my life.  Her and my dad and my other grandmother constantly tried to make me feel great when my mother was telling me the opposite.  I’d like to think since 2000 the past 11 years have been the best 11 years of my life.  I got out of a bad situation by using the tools that I had in front of me.  Good grades and getting into a college so I could aspire to be the person that I wanted to be.  I had some great people along the way to help me out. So getting to the point I like to help people further there lives somehow in the best way I can possibly help out.  This New Years was one of the great years that helped me forget the past and focus on the present.  It makes me realize how far I’ve come since high school and even since college.  The one thing I’ve been grappling with over the years is how do you feel good about making money while helping others out.  I’d to think I try really hard to give back to my community.  I could not have done what I did without other people’s help.  I sent out an email prior to even announcing I got the award today.  I can’t say I did everything on my own.  It’s not possible.  I had the help of others every step of the way.  I’m not sure if this makes sense but the award can’t just be mine.  This award is really owned by each and everyone who helped me get here.  From my dad to my grandmother to Rachel Appel to Bob Hunt to Jason Gallicchio to Cathy Dew to Mark Rackley to Johnny Ennion to Lee Brandt to Jeff Julian to John Alexander to Lori Gowin and to many others.  Thank you guys for all the help and support. Technorati Tags: SharePoint Community,MVP Award,Microsoft Community

  Read the article

• Build 2012, some thoughts..

  - by Dennis Vroegop

  I think you probably read my rant about the logistics at Build 2012, as posted here, so I am not going into that anymore. Instead, let’s look at the content. (BTW If you did read that post and want some more info then read Nia Angelina’s post about Build. I have nothing to add to that.) As usual, there were good speakers and some speakers who could benefit from some speaker training. I find it hard to understand why Microsoft allows certain people on stage, people who speak English with such strong accents it’s hard for people, especially from abroad, to understand. Some basic training might be useful for some of them. However, it is nice to see that most speakers are project managers, program managers or even devs on the teams that build the stuff they talk about: there was a lot of knowledge on stage! And that means when you ask questions you get very relevant information. I realize I am not the average audience member here, I am regular speaker myself so I tend to look for other things when I am in a room than most audience members so my opinion might differ from others. All in all the knowledge of the speakers was above average but the presentation skills were most of the times below what I would describe as adequate. But let us look at the contents. Since the official name of the conference is Build Windows 2012 it is not surprising most of the talks were focused on building Windows 8 apps. Next to that, there was a lot of focus on Azure and of course Windows Phone 8 that launched the day before Build started. Most sessions dealt with C# and JavaScript although I did see a tendency to use C++ more. Touch. Well, that was the focus on a lot of sessions, that goes without saying. Microsoft is really betting on Touch these days and being a Touch oriented developer I can only applaud this. The term NUI is getting a bit outdated but the principles behind it certainly aren’t. The sessions did cover quite a lot on how to make your applications easy to use and easy to understand. However, not all is touch nowadays; still the majority of people use keyboard and mouse to interact with their machines (or, as I do, use keyboard, mouse AND touch at the same time). Microsoft understands this and has spend some serious thoughts on this as well. It was all about making your apps run everywhere on all sorts of devices and in all sorts of scenarios. I have seen a couple of sessions focusing on the portable class library and on sharing code between Windows 8 and Windows Phone 8. You get the feeling Microsoft is enabling us devs to write software that will be ubiquitous. They want your stuff to be all over the place and they do anything they can to help. To achieve that goal they provide us with brilliant SDK’s, great tooling, a very, very good backend in the form of Windows Azure (I was particularly impressed by the Mobility part of Azure) and some fantastic hardware. And speaking of hardware: the partners such as Acer, Lenovo and Dell are making hardware that puts Apple to a shame nowadays. To illustrate: in Bellevue (very close to Redmond where Microsoft HQ is) they have the Microsoft Store located very close to the Apple Store, so it’s easy to compare devices. And I have to say: the Microsoft offerings are much, much more appealing that what the Cupertino guys have to offer. That was very visible by the number of people visiting the stores: even on the day that Apple launched the iPad Mini there were more people in the Microsoft store than in the Apple store. So, the future looks like it’s going to be fun. Great hardware (did I mention the Nokia Lumia 920? No? It’s brilliant), great software (Windows 8 is in a league of its own), the best dev tools (Visual Studio 2012 is still the champion here) and a fantastic backend (Azure.. need I say more?). It’s up to us devs to fill up the stores with applications that matches this. To summarize: it is great to be a Windows developer. PS. Did I mention Surface RT? Man….. People were drooling all over it wherever I went. It is fantastic :-) Technorati Tags: Build,Windows 8,Windows Phone,Lumia,Surface,Microsoft

  Read the article

• FAQ: Highlight GridView Row on Click and Retain Selected Row on Postback

  - by Vincent Maverick Durano

  A couple of months ago I’ve written a simple demo about “Highlighting GridView Row on MouseOver”. I’ve noticed many members in the forums (http://forums.asp.net) are asking how to highlight row in GridView and retain the selected row across postbacks. So I’ve decided to write this post to demonstrate how to implement it as reference to others who might need it. In this demo I going to use a combination of plain JavaScript and jQuery to do the client-side manipulation. I presumed that you already know how to bind the grid with data because I will not include the codes for populating the GridView here. For binding the gridview you can refer this post: Binding GridView with Data the ADO.Net way or this one: GridView Custom Paging with LINQ. To get started let’s implement the highlighting of GridView row on row click and retain the selected row on postback.  For simplicity I set up the page like this: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>You have selected Row: (<asp:Label ID="Label1" runat="server" />)</h2> <asp:HiddenField ID="hfCurrentRowIndex" runat="server"></asp:HiddenField> <asp:HiddenField ID="hfParentContainer" runat="server"></asp:HiddenField> <asp:Button ID="Button1" runat="server" onclick="Button1_Click" Text="Trigger Postback" /> <asp:GridView ID="grdCustomer" runat="server" AutoGenerateColumns="false" onrowdatabound="grdCustomer_RowDataBound"> <Columns> <asp:BoundField DataField="Company" HeaderText="Company" /> <asp:BoundField DataField="Name" HeaderText="Name" /> <asp:BoundField DataField="Title" HeaderText="Title" /> <asp:BoundField DataField="Address" HeaderText="Address" /> </Columns> </asp:GridView> </asp:Content>   Note: Since the action is done at the client-side, when we do a postback like (clicking on a button) the page will be re-created and you will lose the highlighted row. This is normal because the the server doesn't know anything about the client/browser not unless if you do something to notify the server that something has changed. To persist the settings we will use some HiddenFields control to store the data so that when it postback we can reference the value from there. Now here’s the JavaScript functions below: <asp:content id="Content1" runat="server" contentplaceholderid="HeadContent"> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js" type="text/javascript"></script> <script type="text/javascript">       var prevRowIndex;       function ChangeRowColor(row, rowIndex) {           var parent = document.getElementById(row);           var currentRowIndex = parseInt(rowIndex) + 1;                 if (prevRowIndex == currentRowIndex) {               return;           }           else if (prevRowIndex != null) {               parent.rows[prevRowIndex].style.backgroundColor = "#FFFFFF";           }                 parent.rows[currentRowIndex].style.backgroundColor = "#FFFFD6";                 prevRowIndex = currentRowIndex;                 $('#<%= Label1.ClientID %>').text(currentRowIndex);                 $('#<%= hfParentContainer.ClientID %>').val(row);           $('#<%= hfCurrentRowIndex.ClientID %>').val(rowIndex);       }             $(function () {           RetainSelectedRow();       });             function RetainSelectedRow() {           var parent = $('#<%= hfParentContainer.ClientID %>').val();           var currentIndex = $('#<%= hfCurrentRowIndex.ClientID %>').val();           if (parent != null) {               ChangeRowColor(parent, currentIndex);           }       }          </script> </asp:content>   The ChangeRowColor() is the function that sets the background color of the selected row. It is also where we set the previous row and rowIndex values in HiddenFields.  The $(function(){}); is a short-hand for the jQuery document.ready event. This event will be fired once the page is posted back to the server that’s why we call the function RetainSelectedRow(). The RetainSelectedRow() function is where we referenced the current selected values stored from the HiddenFields and pass these values to the ChangeRowColor() function to retain the highlighted row. Finally, here’s the code behind part: protected void grdCustomer_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { e.Row.Attributes.Add("onclick", string.Format("ChangeRowColor('{0}','{1}');", e.Row.ClientID, e.Row.RowIndex)); } } The code above is responsible for attaching the javascript onclick event for each row and call the ChangeRowColor() function and passing the e.Row.ClientID and e.Row.RowIndex to the function. Here’s the sample output below:   That’s it! I hope someone find this post useful! Technorati Tags: jQuery,GridView,JavaScript,TipTricks

  Read the article

• Many Different Things Rolled into a Ball

  - by MOSSLover

  Yeah I know I don’t blog much anymore, because life has taken me places that don’t involve the interwebs unfortunately.  I am in the midst of planning two events, starting a non for profit, creating more sessions for various conferences, submitting to various conferences, working a 40 hour a week job, attempting to hang out with boyfriend/friends/family.  So you can see that list does not include this blog sadly that’s how it goes sometimes.  The bottom piece very important over any of the top pieces.  I haven’t seen St. Louis in a while and I get to go back.  I was gone from home for MVP Summit and Best Practices Conference, so the boyfriend and cat didn’t get to see me either for a bit.  Then you have to add in the whole toilet being broken fiasco this week.  Maintenance really thought it would be cool to turn off the ability to flush.  I mean who does that?  Then when we call the owner he comes by turns it on and we figure it was an accident, because well the next day no one came by to tell us there was a leak.  It was all kinds of strangeness and involved me running to other people’s toilets.  As Dan Usher would say, I was a sad panda for a few days.  So I guess I wanted to post a few thoughts here just because I can.  I do not like multiple content editor webparts embedded with html files in numerous pages doing the same thing.  I will tell you why I don’t like these particular webparts and the way they are being used.  First off if you have a bunch of pages with script includes it’s about time you should just dump them into the masterpage.  Why bother finding all 20 pages and changing those pages when you can just use a single masterpage that already exists? The other thing that is bothering me days is screen scraping.  Just don’t do it, because in 2010 you will find the UI is substantially slower.  I understand you are new and you have no idea what to do.  You are also using 2007 am I right?  So then you need to go to codeplex.com and type in a search for SPServices.  Download it, use it, love it and then have it’s babies (well maybe don’t go so far this is not the GRID in Tron). If you have a ton of constants in your code why did you not go in and create a webpart with a bunch of properties and/or link to a configuration list hidden in the browser?  This type of property and list could help you out in the long run.  The power users and administrators can now change the control without you having to compile it over and over again.  It’s good stuff.  Also, you can change the control without compiling it, especially in 2007 where you have to do a farm solution.  In 2010 you can do a sandbox solution I guess, but shouldn’t you make it as easy and supportable as possible for other users? In conclusion I’m an angry person when it comes to viewing something repeatedly and analyzing it in a system.  Now we will move on to the next topic…MVP Summit…So yeah I can’t really talk about particulars, but I can talk about my experience as a person.  Don’t build something up to be cooler than it is only to be dropped from your 10,000 foot perch.  My experience was great, but the content overall was something to be desired.  It’s ok I got to meet a lot of people I would not have met if I had not gone.  Some of it was surreal, such as product group members showing up and talking to us.  It was pretty neat.  Plus I never had the chance to get to that mythical MS Office in Redmond.  Prior to Summit it was like Rainbow Brites unicorn trying taunting me on television when I was a kid.  So I guess with all that said I give it a B.  It was awesome in some way, but lacking in other ways.  The cool part is that I got to go.  Would I have lived without going? Yes, but it was still cool. I could prattle on about other things and make this post massive, but I’m going to pass and give myself a piece of Sunday to play Rockband and do 800 other things.  I hope the two of you who read this blog are well.  I’ll catch you all at another juncture.  Have a good weekend and varying holidays in between. Technorati Tags: SharePoint,MVP Summit,JQuery,Javascript

  Read the article

• Telerik Releases a new Visual Entity Designer

  Love LINQ to SQL but are concerned that it is a second class citizen? Need to connect to more databases other than SQL Server? Think that the Entity Framework is too complex? Want a domain model designer for data access that is easy, yet powerful? Then the Telerik Visual Entity Designer is for you. Built on top of Telerik OpenAccess ORM, a very mature and robust product, Teleriks Visual Entity Designer is a new way to build your domain model that is very powerful and also real easy to use. How easy? Ill show you here. First Look: Using the Telerik Visual Entity Designer To get started, you need to install the Telerik OpenAccess ORM Q1 release for Visual Studio 2008 or 2010. You dont need to use any of the Telerik OpenAccess wizards, designers, or using statements. Just right click on your project and select Add|New Item from the context menu. Choose Telerik OpenAccess Domain Model from the Visual Studio project templates. (Note to existing OpenAccess users, dont run the Enable ORM wizard or any other OpenAccess menu unless you are building OpenAccess Entities.) You will then have to specify the database backend (SQL Server, SQL Azure, Oracle, MySQL, etc) and connection. After you establish your connection, select the database objects you want to add to your domain model. You can also name your model, by default it will be NameofyourdatabaseEntityDiagrams. You can click finish here if you are comfortable, or tweak some advanced settings. Many users of domain models like to add prefixes and suffixes to classes, fields, and properties as well as handle pluralization. I personally accept the defaults, however, I hate how DBAs force underscores on me, so I click on the option to remove them. You can also tweak your namespace, mapping options, and define your own code generation template to gain further control over the outputted code. This is a very powerful feature, but for now, I will just accept the defaults.   When we click finish, you can see your domain model as a file with the .rlinq extension in the Solution Explorer. You can also bring up the visual designer to view or further tweak your model by double clicking on the model in the Solution Explorer.  Time to use the model! Writing a LINQ Query Programming against the domain model is very simple using LINQ. Just set a reference to the model (line 12 of the code below) and write a standard LINQ statement (lines 14-16).  (OpenAccess users: notice the you dont need any using statements for OpenAccess or an IObjectScope, just raw LINQ against your model.) 1: using System; 2: using System.Linq; 3: //no need for anOpenAccess using statement 4:   5: namespace ConsoleApplication3 6: { 7: class Program 8: { 9: static void Main(string[] args) 10: { 11: //a reference tothe data context 12: NorthwindEntityDiagrams dat = new NorthwindEntityDiagrams(); 13: //LINQ Statement 14: var result = from c in dat.Customers 15: where c.Country == "Germany" 16: select c; 17:   18: //Print out the company name 19: foreach (var cust in result) 20: { 21: Console.WriteLine("CompanyName: " + cust.CompanyName); 22: } 23: //keep the consolewindow open 24: Console.Read(); 25: } 26: } 27: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Lines 19-24 loop through the result of our LINQ query and displays the results. Thats it! All of the super powerful features of OpenAccess are available to you to further enhance your experience, however, in most cases this is all you need. In future posts I will show how to use the Visual Designer with some other scenarios. Stay tuned. Enjoy! Technorati Tags: Telerik,OpenAccess,LINQ Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36  | Next Page >