Search Results

Search found 1587 results on 64 pages for 'ultimate'.

Page 32/64 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Windows 7: Screen will power off, or blank and lock, but not both.

  - by Heptite

  For some reason, my Windows 7 (Ultimate, 64bit) laptop will not power off the display and keep it off if I have the screen saver and/or the timed auto-lock enabled. Either the display blanks (and locks) but never powers off, or it powers off for less then a minute, then the back light visibly powers back on and stays on, even though the screen remains blanked until I touch a key or the trackpad. I've tried varying the screen power down time to greater than, less than, and exactly equal to the blank screen/lock time, with no success. Turning the screen saver and the timed auto-lock off does allow the timed display power down in the power settings to work properly. (Note that I am not talking about system sleep or hibernate. I'm talking about when the machine remains running, but only the display should power down.)

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• enable hardware virtulization in BIOS

  - by rhon

  I am running a FOXCONN AM2+ M61PMV with an AMD Athlon II X2 240 windows 7 ultimate 64 bit From startup I have hit the del key and the options for enabling the Hardware virtulization are not there. I have checked the Microsoft tool that says I can run virtual and i have checked SecurAble, that says yes. But I have an open case w/microsoft (they've been trying for a week [7 tech support people later]) and they're saying that i need to ensure that the hardware is enabled. Where do I go to see? is there another way besides from the start up? HELP!

  Read the article

• Can't run monitor at native 1080p resolution on Windows 7

  - by Rex

  I have a 24" ViewSonic VX2453 monitor that supports 1920x1080p, connected using HDMI. However at that resolution, the desktop goes off the screen. Using the Nvidia control panel, I have to set it to a custom resolution of 1804x1014 to display correctly. The monitor has its drivers properly installed (the correct model name shows up in control panel after installing the drivers), and I'm running 64 bit Win7 Ultimate. I have a GeForce 560 Ti card, if that helps. Why does this happen?

  Read the article

• Can there be multiple monitors with these video cards and setup

  - by z_Zelman

  I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

  Read the article

• Windows 8 safe mode grub 2

  - by Adam Smith

  I need to boot into safe mode in Windows 8 Ultimate to un-install Avira as this is not supported in windows 8. The problem is I have also installed Ubuntu 12.04 and from the grub 2, I do not get the option to boot into windows 8 safe mode. I do not have the CD/DVD of windows 8. Also, "pressing f8 as soon as you press enter after selecting win8 kernel " or for that matter any other key (Shift+F8, F2, F12 ) did not help. Is there a way to get an option in the boot menu to boot into Windows 8 safe mode? Found some similar posts, but could not find any relevant answers. Thanks

  Read the article

• Weird files in User folder

  - by Vervious

  In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

  Read the article

• Adding a MySQL StoredProcedure causes not responding state

  - by Omie

  I'm on Windows 7 ultimate 32bit + xampp 1.7.2 [MySQL v5.1.37] This is my stored procedure : delimiter // CREATE PROCEDURE updatePoints(IN parentid INT(5),IN userid INT(5)) DECLARE chpoints INT(5); BEGIN SELECT points INTO chpoints FROM quiz_challenges WHERE id = parentid; UPDATE quiz_users SET points = points + chpoints WHERE forumid=userid; END; // delimiter ; At first it was showing error 1064 while creating stored procedure. I added delimiters part and when I tried running the query from phpmyadmin, Firefox went into not responding state. After that I started Internet Explorer and tried opening my pages which use the same database, it worked fine. However, I tried opening phpmyadmin and IE went into not responding state as well. I restarted both servers. Later restarted PC. Tried again but its same behavior. So whats wrong with this tiny little code ? Am I missing something which might be causing infinite loop ? Thanks

  Read the article

• Question regarding IPv6 - Solicited-Node Address with a Link local scope

  - by Pulse

  Situation: A small LAN comprising a Windows 7 Ultimate x54 PC, 2 XP Pro x86 PCs and an Asus router.The Win 7 box has IPv6 enabled. There are no other IPv6 enabled devices on the LAN. In my firewall I see numerous requests originating from the Win 7 PC, which are for the Multicast address ff02::1:ff.... which is a Solicited-Node address query and has a scope of 2 which equates to the local link. As far as I knew local link addresses are filtered by routers, hence local link. Given that situation I'm wondering why I'm seeing these queries being generated to various addresses? Any ideas? Thanks.

  Read the article

• Can't Open Up Event Viewer

  - by Erik W

  I just installed a large backlog of Windows Updates (I have Windows 7 Ultimate 64-bit) and now a handful of programs are acting strangely (not opening, crashing, etc) I went to try to diagnose the program using the Event Viewer, but when I open it up I get the error "Microsoft Management Console has Stopped Working" immediately after I double-click on the icon. Is there any way for me to figure out what is going wrong? I have another Windows 7 PC, that I tried to remotely view the logs from, but I got the error "The RPC Server is Unavailable". I'd like to start up the service, but oh wait, I can't open anything in the "Administrative Tools". I'd like not to re-install Windows, as I had just done so a couple months ago after a Windows Update jacked up my graphics card drivers.

  Read the article

• How to configure and access IIS in windows 7

  - by user28233

  I've installed IIS on Windows 7(Ultimate) by going to control paneladd/remove features/ then checking the IIS. How do I access something like a preference editor like in wamp server. In wamp server I go to http://localhost/phpmyadmin. And accessing the pages I made in http://localhost/pages/ What about in IIS? How do I access something like phpmyadmin. And how do I access the webpages that I made. This is only for educational purposes. And I do not need a site to be accessible on the net. And I already have something like this: What do I do with it. Please help,thanks

  Read the article

• Local Group Policy Editor reverting setting to default

  - by Timur Aydin

  On my Windows 7 Ultimate 32bit system, I have changed the following setting: Local Computer Policy - Computer Configuration - Windows Settings - Security Settings - Local Policies - User Right Assignment - Deny access to this computer from the network This setting was by default "Guest" and I deleted this so that Guest can access a defined network share over the LAN. But later, I have changed my mind and wanted to return this setting to its default. So I edited that setting and specified Guest. But the setting became MYWINPC\Guest. So my question is, what is the difference between the previous setting "Guest" and MYWINPC\Guest? And how do I return this setting to its default value, "Guest"?

  Read the article

• Strange behavior of USB HID device

  - by spyder

  I have a device with ARM that work as USB HID. It working well on Windows XP x32 sp 2 and sp 3 (USB 2.0, many PCs), on Windows 7 x32 Ultimate (USB 2.0, Lenovo and HP laptops) but do not work on Windows 7 x64 Home Premium sp1 — plugged and unplugged frequently in USB 2.0 with baloon with "unknown device" in system tray and works not well in USB 3.0 port (MSI all-in-one PC), not all programs can detect it. What can cause this problem? Update. I connected my device via USB hub and everything works fine with it.

  Read the article

• how to debug BSOD irql_not_less_or_equal error

  - by Sev

  So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

  Read the article

• Windows 7 Taskbar doesn't remember configuration

  - by eidylon

  Hi all... I have my taskbar on Win7 all customized. I have it at the top of the screen, and i have the address bar, desktop toolbar, and a custom folder toolbar all turned on. I have it set to two rows, and have the taskbar and desktop on one row and the address bar and custom folder on the second row. When i shutdown then restart my computer it remembers that i have the taskbar at the top of the screen, but it does not remember the way i had the various bars organized, and it just makes it a single row with the bars all mushed together on one row. Anyone else had this/know how to fix it? Running Win7 Ultimate x64.

  Read the article

• why only google related sites load using wireless network

  - by gansai

  I have a wireless internet connection through BSNL. I have a windows 7 ultimate, and using latest Google chrome. During night time ie from 12:30 am onwards till around 5:30 am, I have the following problem: Only the following webpages load: Google Search Google images and all related to google product pages like you see them on the google home page. Blogspot webpages as supported through Google. Any other site loading gets stuck with the status message:- Waiting for www.thaturl.com .... And it goes on and on. Why does this happen? I checked around googling for this but no solution at all. By the way I tried changing my dns addresses too sometimes from automatically to opendns and then Google public dns. I need some solution which might help me to load other websites also. Thanks in advance.

  Read the article

• Reasons for firewall alerts from ICMPv6 Local Link Address unreachable?

  - by Pulse

  For some reason I'm receiving numerous alerts, for a variety of processes, from my firewall. These are all related to ICMPv6 and are the same, apart from the process for which the alert was generated. 'Application/Process' Is trying to Access the Internet Remote Address - fe80::7191:6bd1:e5fa:58af [The Link Local Address] ICMP Type = 1 [Destination Unreachable] ICMP Code = 3 [Address Unreachable] Protocol = ICMPv6 Allow or Block If I Allow or Block, the alert never reoccurs. I understand what the various elements of these messages represent, I just can't fathom out why they are being generated. What could be the reason for these Alerts? OS - Windows 7 x86 Ultimate Thanks

  Read the article

• Daemon Tools error (0xc0000006)

  - by Roberts

  I tried to reinstall Windows XP to Windows 7, but I could not install the video card drivers because the driver installation software only works on XP.I have launched the setup program with XP mode. After I installed the setup, I restarted the computer and Windows 7 wasn't booting.But that isn't the problem why I asked this question. The problem is that I have reinstalled my Windows 7 Ultimate to Windows XP SP3 and I wanted to install Dameon Tools.After installation I restarted the PC (as the setup wanted) and when the Daemon Tools launches it shows the error: Application failed to initialize properly (0xc0000006). Click OK to terminate the application.

  Read the article

• Video has become blurred and smoothed out?!

  - by benwebdev

  Hi, Since yesterday video and graphics on my Windows 7 desktop seem to have become smoothed out and blurred slightly and I'm not sure why. The last thing I did on the machine was play Fallout New Vegas for the first time. An example can be seen in the picture here screenshot - note how smoothed out the character on the right seems, lots of definition looks lost. It's really annoying and happening regardless of what I watch. My system is below: Windows7 Ultimate 64 bit 6GB RAM Sapphire HD 5770 Vapor-X 1GB Gigabyte X58A-UD3R Motherboard Coolermaster Silent Pro M series 700W power supply All help greatly appreciated thanks

  Read the article

• Best use of new express card on Windows

  - by jckdnk111

  I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

  Read the article

• How to change the computer name on a server configured by Puppet

  - by David Sulpy

  I am new to Puppet and I'm trying to get Puppet to configure my EC2 instances after they're started from a Cloud Formation Template in AWS. The problem is that all the nodes that get started from the Cloud Formation Template all have the same name (the name from the AMI that the new nodes derive from). I would love to find a way to have puppet rename the nodes when the nodes start up. (although, as far as I know, a Computer Name change requires reboot, a separate issue...) If you can point me to some documentation that can help me figure this out or if you have any ideas that would be great. My ultimate goal is to have each EC2 start with a unique name so that I can use New Relic server monitoring to report the different servers.

  Read the article

• Can I set Windows default second-monitor behaviour to "Extend these displays"?

  - by MT_Head

  I travel to multiple offices (and multiple desks in those offices), and whenever possible I plug an external monitor into my laptop. Whenever I plug in a monitor I haven't used before, Windows defaults to "Duplicate these displays" - which messes up the arrangement of icons on my desktop if the external monitor is a different shape from my laptop's monitor. I then select "Extend these displays", and my laptop screen returns to its original shape - but my icons don't go back to their original arrangement. Grrrrr. Fast-forward a few days or weeks; I've got my icons arranged so I can find stuff again - then I go to a new office and it starts all over again. I'm tired of this. Is it possible to make "Extend these displays" the default behavior? I'm using Windows 8 x64 Home Premium, but I had the same complaint under Windows 7 x64 Ultimate. (Prior to that, I hadn't discovered the joy of dual displays. Ah, the time I wasted...)

  Read the article

• Dell XT on Windows 7 never recovers from sleep

  - by user39408

  My Dell XT, after upgrade to windows 7 ultimate seems to never recover from a sleep i.e. opening the lid shows a flicker, and then all lights go off. When I press the power button long enough it reboots and says that Windows had a serious error, blah blah (but no BSOD). Hibernate doesnt cause any problem, and that is what I am doing as default. Any idea how to debug more and fix it. Looked around (on web) for answer, tried related solutions (hotfixes for similar but not same problems) etc, but noting fixes this.

  Read the article

• Automatically make or update a copy real-time on another hard drive volume whenever files are saved to a particular folder

  - by mrblint

  Whenever I save or update a file to a particular designated folder on my C:\drive I would like to make or update a copy on my network-attached storage device, ideally saving the copy to the NAS as a version rather than overwriting a copy there, if possible. I have Windows 7 x64 Ultimate. Is there any feature built-in that can accomplish this? It has to be a real copy, not merely a pointer. I'm trying to achieve some redundancy for especially critical documents (in a variety of formats) that change frequently throughout the day. P.S. I am looking for folder-level granularity; I wouldn't want this to happen for every file on the C: volume.

  Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >