Search Results

Search found 95445 results on 3818 pages for 'volume one'.

Page 32/3818 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • Performance of Cluster Shared Volume file copy from SAN

    - by Sequenzia
    I am hoping someone can help me out with a strange issue. We are running a Microsoft Failover Cluster with Server 2008 R2 and an Equallogic PS4000 SAN. Our main configuration has 2 Dell Poweredge T710 Servers in the cluster. We have CSV and Quorm setup. The servers each have 10 Broadcom 1Gb NICs. Right now 4 of the NICS are on the iSCSI network for accessing the SAN. They use MPIO and the Dell HIT pack. We have 5 VMs running on each node and everything runs smooth. No noticeable performance issues or anything. From the SAN I can see the 4 iSCSI connections from each server to each volume (CSV and Quorm). Again, it seems to perform great. The problem I am running into is with backups. I have tried a few backup programs like backupchain and Veeam. The problem is both of them are very very slow to backup the VMs. For instance I have a 500GB (fixed disc) VHD that’s running on the cluster. It takes over 18 hours to backup that VHD and that’s with compression and depuping turned off which is supposed to be the fasted. We also have a separate server that is just for backups. It has a lot of directed attached storage. As part of the troubleshooting I decided to bring that server into the cluster as a node. It now has access to the CSV and can read from C:\clusterstorage\volume1 which is where our VHDs live. This backup server only has 2 NICs. 1 NIC is going to the iSCSI network and the other is just on the main network. It has Intel NICS in it without any sort of MPIO or teaming. So with the 3rd server now in the cluster I started doing some benchmarking. I have a test VHD that’s about 7GBs that’s stored in the CSV. I have tested file copying that VHD from all 3 servers to directed attached storage in the respective server. The 2 Dell servers that are the main nodes in the cluster (they house the VMs) are reading that file at about 20Mbs/Sec. Which at that rate is way to slow for the backups. The other server which only has 1 NIC to the SAN is reading at around 100Mbs/Sec. I spent a few hours on the phone with Dell today about this . We went through all kind of tests and he was pretty dumb founded. He really has no idea why that server with only 1 NIC is reading about 5 times as fast as the servers with 4 NICS and MPIO. We looked at the network utilization of the NICs while the file copy was going on. The servers with the 4 NICs had a small increase of activity during the file copy but they only went up to around 8-10% on all 4 NICs. The other server with the 1 NIC jumped up to over 80% during the file copy. I plan on doing some more testing after hours and calling Dell back tomorrow but I really am confused (and so is Dell’s support rep) why I cannot get faster file copy access to the CSV on those servers. Anyone have any input on this? Any feedback would be greatly appreciated. Thanks in advance.

    Read the article

  • aide --init show lots of errors

    - by newbie14
    I have a brand new centos 6.2 server. The first thing I did is yum -y install aide and then next I did aide --init. Below is a whole lot of errors I got.What does it means must I reinstall it? Or leave it ? /usr/sbin/prelink: /usr/sbin/lusermod: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/console-kit-daemon: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/NetworkManager: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/rtacct: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/tcpdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dnsmasq: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getsebool: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ownership: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/modem-manager: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pluginviewer: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sasl2-shared-mechlist: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ifdhandler: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/mklost+found: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/vpddecode: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/skdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getpcaps: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lpasswd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/tmpwatch: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ck-log-system-stop: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/alternatives: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/avahi-daemon: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dump-acct: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/luseradd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/nstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/efibootmgr: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sasldblistusers2: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/e2freefrag: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sa: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lgroupadd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ss: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/dmidecode: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/sktest: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/fdformat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/saslpasswd2: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/selinuxenabled: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pppstats: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_supplicant: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/capsh: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/togglesebool: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/kppp: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lgroupmod: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/cracklib-unpacker: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/getcap: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/avcstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lnstat: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/filefrag: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lid: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/bonobo-activation-sysconf: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lockdev: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/mcelog: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/cifs.upcall: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pcscd: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/brctl: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/logrotate: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_passphrase: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/pppdump: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/lsof: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/ck-log-system-start: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/setcap: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/rtkitctl: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/latencytop: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/wpa_cli: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process /usr/sbin/prelink: /usr/sbin/saned: at least one of file's dependencies has changed since prelinking Error on exit of prelink child process

    Read the article

  • Matlab 3d volume visualization and 3d overlay

    - by inf.ig.sh
    Hi, so the question ist pretty much the title. I have a 3d volume loaded as raw data [256, 256, 256] = size(A). It contains only values of zero's and ones, where the 1's represent the structure and 0's the "air". I want to visualize the structure in matlab and then run an algorithm on it and put an overlay on it, let's say in the color red. So to be more precise: How do i visualize the 3d volume. 0's transparent, 1's semitransparent? Plot a line in the 3 d vis as an overlay? I already read the mathworks tutorials and they didn't help. I tried using the set command, but it fails completly saying for every property i try "invalid root property". I hope someone can help.

    Read the article

  • Streamed mp3 only plays for 1 second

    - by angel6
    Hi, I'm using the plaympeg.c (modified) code of smpeg as a media player. I've got ffserver running as a streaming server. I'm a streaming an mp3 file over http. But when I run plaympeg.c, it plays the streamed file only for a second. When I run plaympeg again, it starts off from where it left and plays for 1 second. Does anyone know why this happens an how to fix it? I've tested it out on WMP and it plays the entire file in one go. So, i guess it's not a problem with the streaming or ffserver.conf include include include include /* #ifdef unix */ include include include include include include include define NET_SUPPORT /* General network support */ define HTTP_SUPPORT /* HTTP support */ ifdef NET_SUPPORT include include include include endif include "smpeg.h" ifdef NET_SUPPORT int tcp_open(char * address, int port) { struct sockaddr_in stAddr; struct hostent * host; int sock; struct linger l; memset(&stAddr,0,sizeof(stAddr)); stAddr.sin_family = AF_INET ; stAddr.sin_port = htons(port); if((host = gethostbyname(address)) == NULL) return(0); stAddr.sin_addr = *((struct in_addr *) host-h_addr_list[0]) ; if((sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0) return(0); l.l_onoff = 1; l.l_linger = 5; if(setsockopt(sock, SOL_SOCKET, SO_LINGER, (char*) &l, sizeof(l)) < 0) return(0); if(connect(sock, (struct sockaddr *) &stAddr, sizeof(stAddr)) < 0) return(0); return(sock); } ifdef HTTP_SUPPORT int http_open(char * arg) { char * host; int port; char * request; int tcp_sock; char http_request[1024]; char c; printf("\nin http_open passed parameter = %s\n",arg); /* Check for URL syntax */ if(strncmp(arg, "http://", strlen("http://"))) return(0); /* Parse URL */ port = 80; host = arg + strlen("http://"); if((request = strchr(host, '/')) == NULL) return(0); request++ = 0; if(strchr(host, ':') != NULL) / port is specified */ { port = atoi(strchr(host, ':') + 1); *strchr(host, ':') = 0; } /* Open a TCP socket */ if(!(tcp_sock = tcp_open(host, port))) { perror("http_open"); return(0); } /* Send HTTP GET request */ sprintf(http_request, "GET /%s HTTP/1.0\r\n" "User-Agent: Mozilla/2.0 (Win95; I)\r\n" "Pragma: no-cache\r\n" "Host: %s\r\n" "Accept: /\r\n" "\r\n", request, host); send(tcp_sock, http_request, strlen(http_request), 0); /* Parse server reply */ do read(tcp_sock, &c, sizeof(char)); while(c != ' '); read(tcp_sock, http_request, 4*sizeof(char)); http_request[4] = 0; if(strcmp(http_request, "200 ")) { fprintf(stderr, "http_open: "); do { read(tcp_sock, &c, sizeof(char)); fprintf(stderr, "%c", c); } while(c != '\r'); fprintf(stderr, "\n"); return(0); } return(tcp_sock); } endif endif void update(SDL_Surface *screen, Sint32 x, Sint32 y, Uint32 w, Uint32 h) { if ( screen-flags & SDL_DOUBLEBUF ) { SDL_Flip(screen); } } /* Flag telling the UI that the movie or song should be skipped */ int done; void next_movie(int sig) { done = 1; } int main(int argc, char *argv[]) { int use_audio, use_video; int fullscreen; int scalesize; int scale_width, scale_height; int loop_play; int i, pause; int volume; Uint32 seek; float skip; int bilinear_filtering; SDL_Surface *screen; SMPEG *mpeg; SMPEG_Info info; char *basefile; SDL_version sdlver; SMPEG_version smpegver; int fd; char buf[32]; int status; printf("\nchecking command line options "); /* Get the command line options */ use_audio = 1; use_video = 1; fullscreen = 0; scalesize = 1; scale_width = 0; scale_height = 0; loop_play = 0; volume = 100; seek = 0; skip = 0; bilinear_filtering = 0; fd = 0; for ( i=1; argv[i] && (argv[i][0] == '-') && (argv[i][1] != 0); ++i ) { if ( strcmp(argv[i], "--fullscreen") == 0 ) { fullscreen = 1; } else if ((strcmp(argv[i], "--seek") == 0)||(strcmp(argv[i], "-S") == 0)) { ++i; if ( argv[i] ) { seek = atol(argv[i]); } } else if ((strcmp(argv[i], "--volume") == 0)||(strcmp(argv[i], "-v") == 0)) { ++i; if (i >= argc) { fprintf(stderr, "Please specify volume when using --volume or -v\n"); return(1); } if ( argv[i] ) { volume = atoi(argv[i]); } if ( ( volume < 0 ) || ( volume 100 ) ) { fprintf(stderr, "Volume must be between 0 and 100\n"); volume = 100; } } else { fprintf(stderr, "Warning: Unknown option: %s\n", argv[i]); } } printf("\nuse video = %d, use audio = %d\n",use_video, use_audio); printf("\ngoing to check input parameters\n"); if defined(linux) || defined(FreeBSD) /* Plaympeg doesn't need a mouse */ putenv("SDL_NOMOUSE=1"); endif /* Play the mpeg files! */ status = 0; for ( ; argv[i]; ++i ) { /* Initialize SDL */ if ( use_video ) { if ((SDL_Init(SDL_INIT_VIDEO) < 0) || !SDL_VideoDriverName(buf, 1)) { fprintf(stderr, "Warning: Couldn't init SDL video: %s\n", SDL_GetError()); fprintf(stderr, "Will ignore video stream\n"); use_video = 0; } printf("\ninitialised video\n"); } if ( use_audio ) { if ((SDL_Init(SDL_INIT_AUDIO) < 0) || !SDL_AudioDriverName(buf, 1)) { fprintf(stderr, "Warning: Couldn't init SDL audio: %s\n", SDL_GetError()); fprintf(stderr, "Will ignore audio stream\n"); use_audio = 0; } } /* Allow Ctrl-C when there's no video output */ signal(SIGINT, next_movie); printf("\nchecking defined supports\n"); /* Create the MPEG stream */ ifdef NET_SUPPORT printf("\ndefined NET_SUPPORT\n"); ifdef HTTP_SUPPORT printf("\ndefined HTTP_SUPPORT\n"); /* Check if source is an http URL */ printf("\nabout to call http_open\n"); printf("\nhere we go\n"); if((fd = http_open(argv[i])) != 0) mpeg = SMPEG_new_descr(fd, &info, use_audio); else endif endif { if(strcmp(argv[i], "-") == 0) /* Use stdin for input */ mpeg = SMPEG_new_descr(0, &info, use_audio); else mpeg = SMPEG_new(argv[i], &info, use_audio); } if ( SMPEG_error(mpeg) ) { fprintf(stderr, "%s: %s\n", argv[i], SMPEG_error(mpeg)); SMPEG_delete(mpeg); status = -1; continue; } SMPEG_enableaudio(mpeg, use_audio); SMPEG_enablevideo(mpeg, use_video); SMPEG_setvolume(mpeg, volume); /* Print information about the video */ basefile = strrchr(argv[i], '/'); if ( basefile ) { ++basefile; } else { basefile = argv[i]; } if ( info.has_audio && info.has_video ) { printf("%s: MPEG system stream (audio/video)\n", basefile); } else if ( info.has_audio ) { printf("%s: MPEG audio stream\n", basefile); } else if ( info.has_video ) { printf("%s: MPEG video stream\n", basefile); } if ( info.has_video ) { printf("\tVideo %dx%d resolution\n", info.width, info.height); } if ( info.has_audio ) { printf("\tAudio %s\n", info.audio_string); } if ( info.total_size ) { printf("\tSize: %d\n", info.total_size); } if ( info.total_time ) { printf("\tTotal time: %f\n", info.total_time); } /* Set up video display if needed */ if ( info.has_video && use_video ) { const SDL_VideoInfo *video_info; Uint32 video_flags; int video_bpp; int width, height; /* Get the "native" video mode */ video_info = SDL_GetVideoInfo(); switch (video_info->vfmt->BitsPerPixel) { case 16: case 24: case 32: video_bpp = video_info->vfmt->BitsPerPixel; break; default: video_bpp = 16; break; } if ( scale_width ) { width = scale_width; } else { width = info.width; } width *= scalesize; if ( scale_height ) { height = scale_height; } else { height = info.height; } height *= scalesize; video_flags = SDL_SWSURFACE; if ( fullscreen ) { video_flags = SDL_FULLSCREEN|SDL_DOUBLEBUF|SDL_HWSURFACE; } video_flags |= SDL_ASYNCBLIT; video_flags |= SDL_RESIZABLE; screen = SDL_SetVideoMode(width, height, video_bpp, video_flags); if ( screen == NULL ) { fprintf(stderr, "Unable to set %dx%d video mode: %s\n", width, height, SDL_GetError()); continue; } SDL_WM_SetCaption(argv[i], "plaympeg"); if ( screen->flags & SDL_FULLSCREEN ) { SDL_ShowCursor(0); } SMPEG_setdisplay(mpeg, screen, NULL, update); SMPEG_scaleXY(mpeg, screen->w, screen->h); } else { SDL_QuitSubSystem(SDL_INIT_VIDEO); } /* Set any special playback parameters */ if ( loop_play ) { SMPEG_loop(mpeg, 1); } /* Seek starting position */ if(seek) SMPEG_seek(mpeg, seek); /* Skip seconds to starting position */ if(skip) SMPEG_skip(mpeg, skip); /* Play it, and wait for playback to complete */ SMPEG_play(mpeg); done = 0; pause = 0; while ( ! done && ( pause || (SMPEG_status(mpeg) == SMPEG_PLAYING) ) ) { SDL_Event event; while ( use_video && SDL_PollEvent(&event) ) { switch (event.type) { case SDL_VIDEORESIZE: { SDL_Surface *old_screen = screen; SMPEG_pause(mpeg); screen = SDL_SetVideoMode(event.resize.w, event.resize.h, screen->format->BitsPerPixel, screen->flags); if ( old_screen != screen ) { SMPEG_setdisplay(mpeg, screen, NULL, update); } SMPEG_scaleXY(mpeg, screen-w, screen-h); SMPEG_pause(mpeg); } break; case SDL_KEYDOWN: if ( (event.key.keysym.sym == SDLK_ESCAPE) || (event.key.keysym.sym == SDLK_q) ) { // Quit done = 1; } else if ( event.key.keysym.sym == SDLK_RETURN ) { // toggle fullscreen if ( event.key.keysym.mod & KMOD_ALT ) { SDL_WM_ToggleFullScreen(screen); fullscreen = (screen-flags & SDL_FULLSCREEN); SDL_ShowCursor(!fullscreen); } } else if ( event.key.keysym.sym == SDLK_UP ) { // Volume up if ( volume < 100 ) { if ( event.key.keysym.mod & KMOD_SHIFT ) { // 10+ volume += 10; } else if ( event.key.keysym.mod & KMOD_CTRL ) { // 100+ volume = 100; } else { // 1+ volume++; } if ( volume 100 ) volume = 100; SMPEG_setvolume(mpeg, volume); } } else if ( event.key.keysym.sym == SDLK_DOWN ) { // Volume down if ( volume 0 ) { if ( event.key.keysym.mod & KMOD_SHIFT ) { volume -= 10; } else if ( event.key.keysym.mod & KMOD_CTRL ) { volume = 0; } else { volume--; } if ( volume < 0 ) volume = 0; SMPEG_setvolume(mpeg, volume); } } else if ( event.key.keysym.sym == SDLK_PAGEUP ) { // Full volume volume = 100; SMPEG_setvolume(mpeg, volume); } else if ( event.key.keysym.sym == SDLK_PAGEDOWN ) { // Volume off volume = 0; SMPEG_setvolume(mpeg, volume); } else if ( event.key.keysym.sym == SDLK_SPACE ) { // Toggle play / pause if ( SMPEG_status(mpeg) == SMPEG_PLAYING ) { SMPEG_pause(mpeg); pause = 1; } else { SMPEG_play(mpeg); pause = 0; } } else if ( event.key.keysym.sym == SDLK_RIGHT ) { // Forward if ( event.key.keysym.mod & KMOD_SHIFT ) { SMPEG_skip(mpeg, 100); } else if ( event.key.keysym.mod & KMOD_CTRL ) { SMPEG_skip(mpeg, 50); } else { SMPEG_skip(mpeg, 5); } } else if ( event.key.keysym.sym == SDLK_LEFT ) { // Reverse if ( event.key.keysym.mod & KMOD_SHIFT ) { } else if ( event.key.keysym.mod & KMOD_CTRL ) { } else { } } else if ( event.key.keysym.sym == SDLK_KP_MINUS ) { // Scale minus if ( scalesize > 1 ) { scalesize--; } } else if ( event.key.keysym.sym == SDLK_KP_PLUS ) { // Scale plus scalesize++; } else if ( event.key.keysym.sym == SDLK_f ) { // Toggle filtering on/off if ( bilinear_filtering ) { SMPEG_Filter *filter = SMPEGfilter_null(); filter = SMPEG_filter( mpeg, filter ); filter-destroy(filter); bilinear_filtering = 0; } else { SMPEG_Filter *filter = SMPEGfilter_bilinear(); filter = SMPEG_filter( mpeg, filter ); filter-destroy(filter); bilinear_filtering = 1; } } break; case SDL_QUIT: done = 1; break; default: break; } } SDL_Delay(1000/2); } SMPEG_delete(mpeg); } SDL_Quit(); if defined(HTTP_SUPPORT) if(fd) close(fd); endif return(status); }

    Read the article

  • Hell: NTFS "Restore previous versions"...

    - by ttsiodras
    The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

    Read the article

  • change the sound volume of a live stream

    - by Omu
    I have something like this: private var myVideo:Video; public var videoDisplay:UIComponent; ... videoDisplay.addChild(myVideo); ... nsPlay = new NetStream(nc); nsPlay.addEventListener(NetStatusEvent.NET_STATUS, nsPlayOnStatus); nsPlay.bufferTime = 0; nsPlay.play(pro); myVideo.attachNetStream(nsPlay); anybody knows how can I change the volume of this stream, I would like to bind the volume to a slider

    Read the article

  • Windows 8 UX Guidelines in one PDF

    - by nmarun
    There are quite a few things you need do to differently in order to write a great Windows 8 App. Although MSDN has it documented completely in their site , the sheer volume of other related information might overwhelm you. In order to make it easy, they have a single pdf with all the relevant information. The file will also serve as a ‘quick ref’ document whether you are developing using C#-XAML or HTML5-JS-CSS or C++-DirectX style. And yes, this has been updated for the RTM version....(read more)

    Read the article

  • problem in exporting a partition on a usb stick as nfs volume

    - by Bond
    I have a USB disk which has 2 partitions.I exported one of them (on NFS) and now I am trying to mount it at client machine. Each time it gets error mount -t nfs 192.168.1.19:/media/vol2 /mnt/nfs/ mount.nfs: access denied by server while mounting 192.168.1.19:/media/vol2 Here is the /etc/exports file entry showmount -e on nfs server gives Export list for bond: /media/vol2 */24 On the client machine nfs-client package is installed. What more I need to check? Is it logged some where?

    Read the article

  • What is auto-mounting my media volume?

    - by user285277
    Something is repeatedly mounting my "media" share, doing something with it, then quietly un-mounting it with no notifications at the user level. from the little I can gleaned from the console messages below, I thought I'd managed to stop it, if not understand it last night when I followed instructions for deleting all traces of the Google Update Daemon. I've not been using any Google apps whatsoever, so I was surprised to see that in Console. What's more surprising, and perhaps a little distressing, is that the same thing occurred this evening, when the Google Daemon is long gone. I don't have that log because I can't recall precisely what time it occurred. I'll do a search and provide it if you wish, though. In the meantime, any help with this would be extremely appreciated. I've asked over at Apple Discussions but I think it might be a little deeper than those manning the boards this weekend are comfortable with. It's certainly beyond my meager skills. With apologies in advance if this is more lines thank you need. Please note that I've transformed the Google links a little because the forum here requires more reputation points before one can post more than two links. 12/27/13 10:47:31.000 PM kernel[0]: memorystatus_thread: idle exiting pid 53629 [distnoted] 12/27/13 10:48:10.433 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 0; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.434 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 1; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.950 PM com.apple.SecurityServer[17]: Session 103257 created 12/27/13 10:48:34.328 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 2; not stale; error: The file doesn’t exist. 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Media Archive-1, pid 53641 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80d6355008 /Volumes/Media Archive-1 (error = 0, retval = 0) 12/27/13 10:49:32.000 PM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0 12/27/13 10:49:32.000 PM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 12/27/13 10:49:32.000 PM kernel[0]: en0::IO80211Interface::postMessage bssid changed 12/27/13 10:49:33.681 PM configd[16]: network changed: v4(en0-:10.0.1.12) DNS- Proxy- SMB 12/27/13 10:49:33.697 PM configd[16]: network changed: DNS* Proxy 12/27/13 10:49:35.475 PM KernelEventAgent[57]: tid 00000000 received event(s) VQ_NOTRESP (1) 12/27/13 10:49:35.000 PM kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802176b4a0 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Media Archive-1 prevTrigger 0 currTrigger 1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 15 secs for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again 12/27/13 10:49:35.479 PM KernelEventAgent[57]: tid 00000000 type 'afpfs', mounted on '/Volumes/Media Archive-1', from '//Me@Capsule._afpovertcp._tcp.local/Media%20Archive', not responding 12/27/13 10:49:35.487 PM KernelEventAgent[57]: tid 00000000 found 1 filesystem(s) with problem(s) 12/27/13 10:49:36.692 PM com.bourgeoisbits.cloak.agent[14503]: NetworkProfile: (null), (null), (null) (Connected: NO, Airport: NO, Open: NO) [trusted] 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again 12/27/13 10:49:41.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=53662[GoogleSoftwareUp] clearing CS_VALID 12/27/13 10:49:42.102 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 2 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:42.113 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone" 12/27/13 10:49:42.116 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s). 12/27/13 10:49:42.121 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x531870 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x5302d0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x534340 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:42.130 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1a31a90 server=<KSOmahaServer:0x534340> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=1 activeTickets=1 rollCallTickets=1 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:42.292 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:42.296 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:42.299 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again 12/27/13 10:49:43.152 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products. 12/27/13 10:49:43.153 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s). 12/27/13 10:49:43.158 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x18367a0 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x1837e10 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 >, <KSTicket:0x1834750 productID=com.google.talkplugin version=4.7.0.15362 xc=<KSPathExistenceChecker:0x1833890 path=/Library/Application Support/Google/GoogleTalkPlugin.app> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x52e930 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:43.159 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x53a210 server=<KSOmahaServer:0x52e930> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=2 activeTickets=1 rollCallTickets=2 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> <o:app appid="com.google.talkplugin" version="4.7.0.15362" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone, ... (2)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:43.244 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:43.247 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:43.250 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:45.570 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 1 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again 12/27/13 10:49:53.828 PM KernelEventAgent[57]: tid 00000000 unmounting 1 filesystems 12/27/13 10:49:53.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Media Archive-1, flags 524288, pid 57 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: GetReconnectToken failed 32 /Volumes/Media Archive-1 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed 12/27/13 10:50:12.104 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown. 12/27/13 10:50:29.396 PM Dock[93157]: no information back from LS about running process

    Read the article

  • Mounting LVM2 volume with XFS filesystem

    - by Chris
    Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

    Read the article

  • Windows 7 Extend C Volume to Unallocated Space

    - by user327777
    a while back I installed Ubuntu and then later uninstalled it by I think deleting the partitions and recovering the windows 7 boot loader. I am not that experienced with partitioning yet. As you can see here there are two partitions that are now unallocated. The 9gb one is a recovery or something that came with the computer. How can I extend my C partition to use both of those? I do not want to have that much storage just wasted sitting there. Currently when I right click on C and hit extend the wizard pops up but there is no available space to extend. http://i.imgur.com/VxEkdyR.png http://i.imgur.com/DdFZWX9.png Thanks everyone!

    Read the article

  • Oracle MAA Part 1: When One Size Does Not Fit All

    - by JoeMeeks
    The good news is that Oracle Maximum Availability Architecture (MAA) best practices combined with Oracle Database 12c (see video) introduce first-in-the-industry database capabilities that truly make unplanned outages and planned maintenance transparent to users. The trouble with such good news is that Oracle’s enthusiasm in evangelizing its latest innovations may leave some to wonder if we’ve lost sight of the fact that not all database applications are created equal. Afterall, many databases don’t have the business requirements for high availability and data protection that require all of Oracle’s ‘stuff’. For many real world applications, a controlled amount of downtime and/or data loss is OK if it saves money and effort. Well, not to worry. Oracle knows that enterprises need solutions that address the full continuum of requirements for data protection and availability. Oracle MAA accomplishes this by defining four HA service level tiers: BRONZE, SILVER, GOLD and PLATINUM. The figure below shows the progression in service levels provided by each tier. Each tier uses a different MAA reference architecture to deploy the optimal set of Oracle HA capabilities that reliably achieve a given service level (SLA) at the lowest cost.  Each tier includes all of the capabilities of the previous tier and builds upon the architecture to handle an expanded fault domain. Bronze is appropriate for databases where simple restart or restore from backup is ‘HA enough’. Bronze is based upon a single instance Oracle Database with MAA best practices that use the many capabilities for data protection and HA included with every Oracle Enterprise Edition license. Oracle-optimized backups using Oracle Recovery Manager (RMAN) provide data protection and are used to restore availability should an outage prevent the database from being able to restart. Silver provides an additional level of HA for databases that require minimal or zero downtime in the event of database instance or server failure as well as many types of planned maintenance. Silver adds clustering technology - either Oracle RAC or RAC One Node. RMAN provides database-optimized backups to protect data and restore availability should an outage prevent the cluster from being able to restart. Gold raises the game substantially for business critical applications that can’t accept vulnerability to single points-of-failure. Gold adds database-aware replication technologies, Active Data Guard and Oracle GoldenGate, which synchronize one or more replicas of the production database to provide real time data protection and availability. Database-aware replication greatly increases HA and data protection beyond what is possible with storage replication technologies. It also reduces cost while improving return on investment by actively utilizing all replicas at all times. Platinum introduces all of the sexy new Oracle Database 12c capabilities that Oracle staff will gush over with great enthusiasm. These capabilities include Application Continuity for reliable replay of in-flight transactions that masks outages from users; Active Data Guard Far Sync for zero data loss protection at any distance; new Oracle GoldenGate enhancements for zero downtime upgrades and migrations; and Global Data Services for automated service management and workload balancing in replicated database environments. Each of these technologies requires additional effort to implement. But they deliver substantial value for your most critical applications where downtime and data loss are not an option. The MAA reference architectures are inherently designed to address conflicting realities. On one hand, not every application has the same objectives for availability and data protection – the Not One Size Fits All title of this blog post. On the other hand, standard infrastructure is an operational requirement and a business necessity in order to reduce complexity and cost. MAA reference architectures address both realities by providing a standard infrastructure optimized for Oracle Database that enables you to dial-in the level of HA appropriate for different service level requirements. This makes it simple to move a database from one HA tier to the next should business requirements change, or from one hardware platform to another – whether it’s your favorite non-Oracle vendor or an Oracle Engineered System. Please stay tuned for additional blog posts in this series that dive into the details of each MAA reference architecture. Meanwhile, more information on Oracle HA solutions and the Maximum Availability Architecture can be found at: Oracle Maximum Availability Architecture - Webcast Maximize Availability with Oracle Database 12c - Technical White Paper

    Read the article

  • Why is LSHW Only listing one of my two HDDs?

    - by Mark
    I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

    Read the article

  • SQL SERVER – Copy Data from One Table to Another Table – SQL in Sixty Seconds #031 – Video

    - by pinaldave
    Copy data from one table to another table is one of the most requested questions on forums, Facebook and Twitter. The question has come in many formats and there are places I have seen developers are using cursor instead of this direct method. Earlier I have written the similar article a few years ago - SQL SERVER – Insert Data From One Table to Another Table – INSERT INTO SELECT – SELECT INTO TABLE. The article has been very popular and I have received many interesting and constructive comments. However there were two specific comments keep on ending up on my mailbox. 1) SQL Server AdventureWorks Samples Database does not have table I used in the example 2) If there is a video tutorial of the same example. After carefully thinking I decided to build a new set of the scripts for the example which are very similar to the old one as well video tutorial of the same. There was no better place than our SQL in Sixty Second Series to cover this interesting small concept. Let me know what you think of this video. Here is the updated script. -- Method 1 : INSERT INTO SELECT USE AdventureWorks2012 GO ----Create TestTable CREATE TABLE TestTable (FirstName VARCHAR(100), LastName VARCHAR(100)) ----INSERT INTO TestTable using SELECT INSERT INTO TestTable (FirstName, LastName) SELECT FirstName, LastName FROM Person.Person WHERE EmailPromotion = 2 ----Verify that Data in TestTable SELECT FirstName, LastName FROM TestTable ----Clean Up Database DROP TABLE TestTable GO --------------------------------------------------------- --------------------------------------------------------- -- Method 2 : SELECT INTO USE AdventureWorks2012 GO ----Create new table and insert into table using SELECT INSERT SELECT FirstName, LastName INTO TestTable FROM Person.Person WHERE EmailPromotion = 2 ----Verify that Data in TestTable SELECT FirstName, LastName FROM TestTable ----Clean Up Database DROP TABLE TestTable GO Related Tips in SQL in Sixty Seconds: SQL SERVER – Insert Data From One Table to Another Table – INSERT INTO SELECT – SELECT INTO TABLE Powershell – Importing CSV File Into Database – Video SQL SERVER – 2005 – Export Data From SQL Server 2005 to Microsoft Excel Datasheet SQL SERVER – Import CSV File into Database Table Using SSIS SQL SERVER – Import CSV File Into SQL Server Using Bulk Insert – Load Comma Delimited File Into SQL Server SQL SERVER – 2005 – Generate Script with Data from Database – Database Publishing Wizard What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com)   Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

    Read the article

  • Tip #104: Did you know … How to view text for the ‘hint’ buttons on the Publish Web Dialog?

    - by The Official Microsoft IIS Site
    After the Beta 2 release of Visual Studio 2010, the Publish Web Dialog was modified to include two information buttons associated with the Service URL and Site/application text boxes. (See Figure 1) Figure 1 – New information (‘hint’) buttons (see circled question marks) There are two keys to remember when trying to view the ‘help’ text associated with these buttons: Patience Hover – don’t click In order to reveal the valuable information that these help icons can unlock, simply move your mouse to...(read more)

    Read the article

  • How to login as other in ubuntu 12.04

    - by murali
    i have upgraded my ubuntu 11.10 to 12.04. i could not see other login option in the login screen. it shows only Guest login and User login. The User Login ask only password and i had never entered in as User login so that i do not know about password of User login. my problem is how to login as root from the login screen? how can i get Other login option to login as root or some other user? before ask this question i have tried the following: try to add the greeter-show-manual-login=true line at the bottom of /etc/lightdm/lightdm.conf file as Guest login but i get access denied error. i do not know the password of User login (ask only password while login) to purpose of adding above line. from the safe mode login, i could login as root but i could not add the above line the lightdm.conf file . i got read only error so that i tried to change the permission to 777 like the following > chmod 777 lightdm.conf (i am within the /etc/lightdm/). but i got the error the file marked as/is read only in the file system. In 11.10 version i have created 4 users. i can see that the users exist in 12.10 . so i am sure my self users are not removed while upgrate. In short, i need Other login option on my login screen? how to get it? please help me. * Edited Question:* i have add the following line the /etc/lightdm/lighdm.conf file on recovery mode greeter-show-manual-login=true and i saved the file using wq command. now my /etc/lightdm/lighdm.conf file looking as the following: [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-show-manual-login=true if i commit any mistake please correct me. by this problem i have wasted the two working day and all the works are in pending... please help me.

    Read the article

  • How one decision can turn web services to hell

    - by DigiMortal
    In this posting I will show you how one stupid decision may turn developers life to hell. There is a project where bunch of complex applications exchange data frequently and it is very hard to change something without additional expenses. Well, one analyst thought that string is silver bullet of web services. Read what happened. Bad bad mistake In the early stages of integration project there was analyst who also established architecture and technical design for web services. There was one very bad mistake this analyst made: All data must be converted to strings before exchange! Yes, that’s correct, this was the requirement. All integers, decimals and dates are coming in and going out as strings. There was also explanation for this requirement: This way we can avoid data type conversion errors! Well, this guy works somewhere else already and I hope he works in some burger restaurant – far away from computers. Consequences If you first look at this requirement it may seem like little annoying piece of crap you can easily survive. But let’s see the real consequences one stupid decision can cause: hell load of data conversions are done by receiving applications and SSIS packages, SSIS packages are not error prone and they depend heavily on strings they get from different services, there are more than one format per type that is used in different services, for larger amounts of data all these conversion tasks slow down the work of integration packages, practically all developers have been in hurry with some SSIS import tasks and some fields that are not used in different calculations in SSAS cube are imported without data conversions (by example, some prices are strings in format “1.021 $”). The most painful problem for developers is the part of data conversions because they don’t expect that there is such a stupid requirement stated and therefore they are not able to estimate the time their tasks take on these web services. Also developers must be prepared for cases when suddenly some service sends data that is not in acceptable format and they must solve the problems ASAP. This puts unexpected load on developers and they are not very happy with it because they can’t understand why they have to live with this horror if it is possible to fix. What to do if you see something like this? Well, explain the problem to customer and demand special tasks to project schedule to get this mess solved before going on with new developments. It is cheaper to solve the problems now that later.

    Read the article

  • Google+1 button strategy - Combined +1s or separate +1s?

    - by nctrnl
    I have included the Google+1 button on my blog. Each post outputs a +1 button on the bottom. Depending if you are viewing the actual post or just the main page the +1 button will "+1" either the post address or blog website address. This made me think for a bit if the +1 button should be configured to +1 the blog section (www.example.org/blog), +1 the main website address (www.example.org), or +1 individual posts?

    Read the article

  • U1 music mp3 files not put into albums

    - by david
    Via the web page I can see that my files sync to U1 cloud servers. For the mp3 files, there seems to be a problem that several questions have already addressed but there does not seem to be a clear answer. If I use EasyTAG 2.1.6, I can see the ID3 tags on the local files and they seem to correctly define the artist, album title and track name. I expect it is not relevant, but I am using 10.04 with several different clients to rip the CDs. However, some mp3 files do not appear in the cloud at all and some others get assigned to Various Artist or Unknown artist. Does the music streaming (e.g. via Ipad) use the tags or the directory/file structure to assign the artist or album, and how quickly should it be expected to work? :-) Which version of ID3 tags does U1 music streaming work best with or prefer? thanks for any help David

    Read the article

  • Google Author information in search results still havent displayed my details in search results

    - by Jayapal Chandran
    I followed the following instructions but still not clear whether i had completely understood it. http://www.google.com/support/webmasters/bin/answer.py?answer=1408986 http://www.labnol.org/internet/author-profile-in-google/19775/ I did the above last week and i did not find my picture in google search result. First i added google + link in certain web pages and in my google profile i added those pages which had google + anchor link with rel=author tag. After updating i used the following to verify. http://www.google.com/webmasters/tools/richsnippets?url=http%3A%2F%2Fvikku.info%2Fcodesnippets%2Fphp%2F&view= You can see that my pic is appearing at the right. here is a screen shot. so, what am i missing? why it is not in the search result. The author of labnol.org said it will take 3 days for my profile photo link to appear... ? Google has stated the following Note that there is no guarantee that a Rich Snippet will be shown for this page on actual search results. For more details, see the FAQ( http://knol.google.com/k/google-rich-snippets-tips-and-tricks#Frequently_Asked_Questions ). Fingers crossed. Thoughtful.

    Read the article

  • Java EE 7 turns one today!

    - by delabassee
    "Tell me and I forget. Teach me and I remember. Involve me and I learn." (Benjamin Franklin) Today marks the first year anniversary of Java EE 7. The JSR 342 specification was finalised on May 28, 2013 with the official launch taking place on June 12, 2013 (original press release). As of today, there are already 3 Java EE 7 compatible Application Servers, coming from different 'vendors' (Oracle, TmaxSoft and Red Hat). Two of those Java EE 7 Application Servers are free and open source. We expect the list of Java EE 7 compatible Application Servers to grow over the coming months. Source: RebelLabs - 'Java Tools and Technologies Landscape for 2014' According to a recent independent survey, one third of the Java EE users who participated in that survey is already using Java EE 7. This is a good sign but it also means that a lot of people are not yet on Java EE 7. So if you haven't yet embarked on Java EE 7, now is really the time to do so! There are various ways to learn Java EE 7, in no particular order ... Continue to read The Aquarium. Through this blog, we are relaying Java EE news but we are also doing our best to highlight relevant technical contents such as articles, community tutorials, etc. Watch the GlassFish YouTube channel. Amongst others, it contains the different videos of the Java EE 7 launch, those videos will give you good technical update on Java EE and its different components specifications (JMS 2.0, JAX-RS 2.0, EJB 3.2, etc.) Take a formal training. Oracle University is starting to roll-out Java EE 7 trainings like the 'Java EE 7: New Features' class.  Attend conferences and JUGs sessions. On that note, we have spent a lot of time to create a strong JavaOne 'Server-Side Java' track. It's still possible to benefit from the early bird JavaOne pricing but don't wait too much! Read books. There are more than 25 (!) books related to Java EE 7 or to one of the Java EE 7 component specification.  There are many more ways to learn Java EE but if I have to suggest one and only one way, I would recommend the Java EE 7 Tutorial. It's exhaustive and clear, it's free and it continues to evolve. And finally as the introductory quote suggest, participation is key to learning. Participate in JUGs,  participate in Adopt-a-JSR, get involved in the different open source communities evolving around Java EE, participate in the JCP... in one word, participate!

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >