Search Results

Search found 11093 results on 444 pages for 'issues'.

Page 320/444 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

  • Ubuntu 10.04 freezing and Ctrl + Alt + Backspace does nothing but music keeps playing

    - by Bryce Thomas
    I'm having intermittent problems where the screen will freeze in Ubuntu. I've tried using Ctrl + Alt + Backspace to restart the X-server, though this does nothing. When the freeze occurs, there's a small square of black dashes around the mouse pointer - maybe 1 inch in size. These dashes look a lot like a 2d barcode. The rest of the screen looks normal, but I can't move the mouse and none of the keyboard shortcuts work to do anything. However, music that I begin playing before the freeze continues to play, which seems to indicate it hasn't stalled up completely. I've noticed a similar freezing problem when I'm using Windows 7. That is, I see the same barcode like dashes around the mouse pointer when it freezes up. So I'm guessing it's either a driver or hardware problem. I thought if it was a hardware problem though, the whole computer might stop working (i.e. music would stop playing)? The video card I am using is an Nvidia, and I believe it's in the 7600 range. In Ubuntu I have the drivers for the card set to the latest available (proprietary). Ideally I'd like to be able to continue using the proprietary drivers. Is there any known issues with the drivers for this model graphics card, or has anyone experienced the same problem and knows how to fix it?

    Read the article

  • Windows XP Setup Fails to Recognize USB Floppy after formatting AHCI disk

    - by Strahn
    I am attempting to install Windows XP Professional x64 onto a HP EliteBook 8540w. I have downloaded both the latest Intel Rapid Storage Technology drivers and the Intel Storage Matrix drivers that are listed on HPs website and copied the drivers over to a floppy disk (two separate floppies, one for each version of the drivers.) Booting to my WinXP Pro x64 install CD, I go through the F6 process, load the driver and am able to see my HDD, delete, create and format partitions on it. When I go to continue the install, after checking the disk, the system asks me to enter the disk labeled "Intel Rapid Storage Technology" and press enter to continue. Nothing happens at this point when I press enter. This happens if I use the latest drivers or the older drivers. We have created a slipstreamed install CD using nLite that has the AHCI drivers integrated, which installs fine. However, we have identified a number of issues with the system that I believe are side-effects of using nLite for the slipstreaming and I am attempting to verify that. I have researched this issue and found a few examples of others having the same problem, but no solution. The USB floppy is a Lacie branded floppy, connecting it to a working XP workstation shows it to be the Y-E Data USB floppy drive that is supposedly 100% compatible with XP per MS KB 916196.

    Read the article

  • SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

    - by Abel
    The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

    Read the article

  • Trying to run a codeigniter app on custom php

    - by hamstar
    I have a CodeIgniter app that I deployed to a server with php 5.2 and my dev box has 5.3, and some stuff doesn't work anymore. I didn't want to upgrade php and risk the other app on the server having issues. Anyway I compiled a custom PHP and added the following to a single .conf file in /etc/httpd/conf.d/zcid.conf with all the other conf files. <VirtualHost *:80> DocumentRoot /var/www/cid/app ServerName sub.example.co.nz </VirtualHost> <Directory "/var/www/cid/app"> authtype Basic authname "oh dear how did this get here i am no good with computer" authuserfile /path/to/auth require valid-user RewriteEngine on RewriteCond $1 !^(index\.php|robots\.txt|createEvent\.php|/cgi-bin) RewriteRule ^(.*)$ /index.php/$1 [L] AddHandler custom-php .php Action custom-php /cgi-bin/php53.cgi </Directory> In /var/www/cid/app I have the cgi-bin folder and the php53.cgi that I copied from /usr/local/php53/bin/php-cgi But now when I navigate to the subdomain it says: The requested URL /cgi-bin/php53.cgi/index.php/ was not found on this server. And if I try to browse to /cgi-bin it says (what it is supposed to?): You don't have permission to access /cgi-bin/ on this server. Quite confused now. Anyone know what to do here? Thanks :)

    Read the article

  • Yum Error Installing Git from kernel.org Repo

    - by Lance
    I want to install the latest version of Git using yum and the RPM repository on kernel.org, but adding the repo to yum.repos.d causes yum to fail with checksum errors. The prevailing solution to this issue seems to be to simply use the repository at Webtatic as answered here on superuser. I know I can also install an older version of Git using the EPEL repo, or compile from the latest source tarball, but honestly I want to understand why I'm having issues using the kernel.org repo. Here’s the workflow, after a clean install of CentOS 5.5 and "yum update": [root]# wget -P /etc/yum.repos.d/ http://kernel.org/pub/software/scm/git/RPMS/git.repo [root]# yum clean all [root]# yum repolist Loaded plugins: fastestmirror Determining fastest mirrors * addons: mirrors.netdna.com * base: mirror.clarkson.edu * epel: serverbeach1.fedoraproject.org * extras: centos.mirror.nac.net * updates: mirror.cogentco.com addons | 951 B 00:00 addons/primary | 202 B 00:00 base | 2.1 kB 00:00 base/primary_db | 1.6 MB 00:01 epel | 3.7 kB 00:00 epel/primary_db | 2.8 MB 00:01 extras | 2.1 kB 00:00 extras/primary_db | 188 kB 00:00 git | 1.2 kB 00:00 git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. git/primary | 155 kB 00:00 http://www.kernel.org/pub/software/scm/git/RPMS/i386/repodata/primary.xml.gz: [Errno -3] Error performing checksum Trying other mirror. Error: failure: repodata/primary.xml.gz from git: [Errno 256] No more mirrors to try. Any suggestions as to a solution, or details why the kernel.org repo has this issue? (Sorry I can't include more links to my references, but I don't have the reputation for that yet.)

    Read the article

  • What is easiest no fail way to publish asp.net app?

    - by Maestro1024
    What is easiest no fail way to publish asp.net app? Sorry a bit of an open ended question but I am having issues deploying an asp.net report project and any solution to get the site up is fine. I am running Win7/SQL 2008 and want to publish a asp.net report site that I created in VS 2008. Website launches when I run in debug in Visual studio but I want to publish the site so that it can be seen on the LAN. I published the files off to a folder and started up the IIS manager and added a new site and pointed to that folder. Set the permission on the folder to share to everyone. However when I go to the DNS name I put in for the website it does not launch. Any ideas on this? I see websites out there talking about a web sharing tab on the folder properties but I do not see that when I go to folders. Why might that be? Another avenue I have not pursued yet is publishing directly to a website. Has anyone tried that? Is that better or worse than publishing to filesystem?

    Read the article

  • Monitor goes black for a few seconds

    - by privatehuff
    I have a Hanns G 28" monitor, Model # HG281D It has its issues (viewing angle sucks) but has been functional and solid, great for desktop stuff. Worked without any sign of any problems for 6-12 months. However, now the monitor "goes black" for about 2-3 seconds, almost like when you click "detect display" It does not turn off (power light does not go amber) The computer is completely unaffected and the video mode never changes when the picture returns. The computer is fully responsive and will keep playing music or taking my keypresses during the time I can't see anything. (it just happened and I kept typing, etc) It happens on multiple computers across several operating systems. (I have an 8-port iogear KVM switch that has several computers connected) But, it seems to happen only on certain computers. I have a hackintosh that does it, a windows 7 PC that does not, a lenovo laptop that does not, and my old ubuntu 8.10 box did not do it, but my new mint 8 box does do it. I've check the connections and tried changing out the power cable and the vga cable. Sometimes it won't happen for hours (or days) and sometimes it happens several times per hour. It was happening many months ago, did not happen for months, and has now started happening again. Does this make any sense? What could it be?

    Read the article

  • Why is my biometric logon method no longer default and how to fix it? Win 7-based lenovo laptop

    - by StormRyder
    My laptop has been having some random problems with hibernating properly. That is a whole another topic that I still haven't resolved, but this is a different issue. The issues are connected, I guess, because one time after my computer experienced a failed hibernate, my login screen changed: since then my login screen always appears as the standard one with a prompt to type in a password. I can still use the finger scanner by clicking "other credentials" button. But that's annoying having to do that every time; previously the prompt to use finger scanner was the default one, whereas the typing password access was the alternate. How do I bring this arrangement back? In other words, how to switch the default from the type password prompt to the finger scan prompt? From online searches, I have only found discussions of turning the biometric access on or off... but clearly it is turned on and working, since I can use it. It's just not the default for some reason...

    Read the article

  • Troubleshooting: Monitor never turns on, system fans running, DVD-ROM does not open.

    - by Wesley
    Hi all, Here are my specs beforehand: ECS P4VXASD2+ (V5.0) motherboard FSB 533MHz Intel Pentium 4 2.40A GHz Prescott Socket 478 2x 256MB PC2100 DDR RAM, 2x 256MB PC133 SDRAM CoolMax 350W PSU DVD-ROM - will edit with brand & model 128MB ATi Radeon 9800 Pro AGP No hard drive So, I just put those parts together today and I tried to power it up, with the monitor connected to the Radeon 9800 in the AGP slot (mobo does not have VGA port). After turning it on, the CPU fan, graphics fan and system fan go on. However, the monitor remains in standby mode, despite being plugged in. Also, after pushing the button on the DVD-ROM drive, it does not open. I've used the DVD-ROM drive before with absolutely no issues. The graphics card was slightly buggy when I put it on another machine, which was left outside in winter weather for 3 months. (Still that computer's integrated graphics worked fine.) CMOS battery was replaced and jumpers are all set correctly. Now, I'm wondering whether the motherboard, CPU, PSU or GPU is the problem. What can I do to test which part is the problem? Just to clarify, I don't have a hard drive, so I usually boot Ubuntu from the disc drive. Anyways, thanks in advance!

    Read the article

  • Firebox 1250e Core Failing?

    - by Noah
    We have 2 Firebox 1250e Core firewall boxes in our production environment, serving as an active and passive mode. A few months back, the active box was flashing a warning light, so our consultant removed it, and plugged it in to a test network. Everything appeared to be working fine, so he reloaded it into the production environment, and we didn't see any other issues. Fast forward to last week, and out network was constantly dropping connections over RDC, timing out, and performing as if there was a traffic issue. I turned off the production box and everything began to work fine immediately. At this point though, I'm not sure how to proceed. Should the box be completely replaced? Is there any recommended testing we could do to determine if there is a failure of some type with this device? Should we try upgrading the software on it? I know the environment isn't the issue, since the passive box (which is now the active one) is working fine. We'd like to have 2 in production though for safety failover purposes. I am not a network admin, but am hoping someone here might be able to provide some guidance.

    Read the article

  • Google Chrome doesn't want to access Facebook

    - by Pieter van Niekerk
    I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

    Read the article

  • SSD causing 100% CPU usage in Apache/PHP

    - by Tim Reynolds
    I wanted to increase the performance on my development laptop so I added an Intel 320 Series SSD as my primary drive. Everything is amazingly fast, as expected, except Apache/PHP. I develop Magento by using an Ubuntu 10.10 virtual machine. Information: Host OS: Win 7 Professional 64bit Guest OS: Ubuntu 10.10 32bit Processor: i7 Chipset QM55 SSD: Intel 320 Series 160gb 30% full HDD: Hitachi 320gb 50% full (in side bay using an adapter) Laptop: Lenovo T510 Using: Shared folders Apache Version: 2.2.16 PHP Version: 5.3.3-1 APC Version: 3.1.3p1 APC Memory: 128M Using tmpfs for cache, log, session directories in Magento In the VM running on the SSD (VM files and source files are on the same drive) loading a product page in the Admin takes on average 26.2 seconds and uses 100% CPU for nearly the entire time. In the VM running on the old HDD loading the same page takes on average 4.4 seconds. It mostly uses around 40-50% of the CPU while rendering the page. I have read this post: Performance issues when using SSD for a developer notebook (WAMP/LAMP stack)? It says to change some settings in the bios. I have turned any and all power management features off in the bios. I can't for the life of me understand why this would be happening.

    Read the article

  • Weird PCI bug: lots of missed packets, or data comes in "bursts"

    - by Thomas O
    I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

    Read the article

  • SBS 2003 boot stalls at acpitabl.dat

    - by John
    I have a SBS 2003 server running for 3 year without any problems, and few days ago it freezes during the boot. System is using two 500 Gb drives in RAID1 (Intel Matrix 7.5) After trying to load in safe mode, boot stops on acpitabl.dat. First idea was that there is a problem with RAID altough disk status was OK, and RAID status was Rebuild. I tried to boot with each drive, and one gives me the same problem, and the other drive is failing to load. Took both drives out, and checked it on a different machine. One drive is dead, other is without any problems. Returned the good drive back in SBS 2003 with changed status to Degraded, but the problem is still the same. I also have a clean SBS 2003 copy installed on this drive (previous installation), which loads smooth and quick. So, I believe the main problem is this installed version of SBS 2003. Did not make any hardware changes, did not make any updates (not sure about any automatic windows updates lately). Since there are tons posts about this problem, and no clear solution, I am trying to figure how to repair SBS 2003 installation, since there are some installed programs on this installation which I cannot re-install without additional issues.

    Read the article

  • Is UPS worthwhile for home equipment?

    - by Jon Skeet
    Over the years, I've had to throw away a quite a few bits of computing equipment (and the like): Several ADSL routers with odd symptoms (losing wireless connections, losing wired connections, DHCP failures, DNS symptoms etc) Two PVRs spontaneously rebooting and corrupting themselves (despite the best efforts of the community to diagnose and help) One external hard disk still claiming to function, but corrupting data One hard disk as part of a NAS raid array "going bad" (as far as the NAS was concerned) (This is in addition to various laptops and printers dying in ways unrelated to this question.) Obviously it'll be impossible to tell for sure from such a small amount of information, but might these be related to power issues? I don't currently have a UPS for any of this equipment. Everything on surge-protected gang sockets, but there's nothing to smooth a power cut. Is home UPS really viable and useful? I know there are some reasonably cheap UPSes on the market, but I don't know how useful they really are. I'm not interested in keeping my home network actually running during a power cut, but I'd like it to power down a bit more gracefully if the current situation is putting my hardware in jeopardy.

    Read the article

  • OC'ing a Sapphire 7950, problems with memory clock

    - by Cliff
    I bought a new rig with sapphire radeon 7950 flex w/ boost. Good scores initially in 3dmark 11, around 7300 stock. Problem is, as soon as i start overclocking, issues arise. the core clock is at 860, but rises to 925 with boost applied in pressured situations. So all the OC tools are showing 925 as base clock for some reason. Ocing the core clock has been no problem though, got up to 1200 pretty stable, but only an incremental increase in 3dmark 11, to 7600 from 7300, which is worrying. The real trouble starts when i start touching the memory clock. As soon as i touch it even by 1 point up to 1251mhz, the performance goes way down. suddenly i score under 5000 graphics in 3dmark11, no matter if its 1251hz or 1500hz. Ive tried adjusting every other parameter, different tools (sapphiretrixx, catalyst, afterburner) all still the same. Tried upping the power, still same. Where is the issue here?

    Read the article

  • Unable to specify parameters to cvlc in a script

    - by VxJasonxV
    I'm creating a script that issues a few curl commands in order to access a time-protected mms stream link, then set up a relay using cvlc (vlc's command line interface) for my own use on an unencumbered player. The curl aspect of this is working, as I can run as a browser and curl side by side and get the same access url. (It's time locked meaning the stream will work forever, but you have to connect quickly or the URL will time out.) The very end of the script prints the command I will run, which is then followed up by "exec $CMD". When I echo $CMD I get: cvlc --sout '#standard{access=http,mux=asf,dst=0.0.0.0:58194}' mms://[...] Manually Copy/Pasting this command in, verbatim, works perfectly fine, but as part of a script, the cvlc execution output says: [0x9743d0] main interface error: no suitable interface module [0x962120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x9743d0] dummy interface: using the dummy interface module... [0xb16e30] stream_out_standard stream out error: no mux specified or found by extension [0xb16ad0] main stream output error: stream chain failed for `standard{mux="",access="",dst="'#standard{access=http,mux=asf,dst=0.0.0.0:58194}'"}' [0xb11cd0] main input error: cannot start stream output instance, aborting [0xb11f70] signals interface error: Caught Interrupt signal, exiting... Why is --sout behaving one way in a script (non-interactive shell?) vs. another way in the foreground (interactive shell) ?

    Read the article

  • OpenVPN Server - CPU is pegged out

    - by ericl42
    Hello, I am configuring OpenVPN to act as a SSL tunnel for a remote location. I have OpenVPN1 at our current location acting as a server then OpenVPN2 at the other location that is acting as a client but is also acting as a DHCP server to machines behind it so they are basically connected to the local LAN. Everything is set up fine and I can talk from location A to location B with no problems like everyone is local. I am however having some performance issues. OpenVPN1 CPU is pegged to 100% the entire time I am copying or doing any type of activity through the tunnel. I expect some CPU usage going up but nothing like this. It's really killing my performance. OpenVPN1 is running in ESX right now with 2 gig RAM and 4 procs with unlimited bursting capacity. I am using AES-192 encryption with a 1024 key. Any idea how I can get my CPU down on OpenVPN1 and my download/upload speeds higher between the tunnel? Thanks. edit: Turning down the logging helped boost the throughput a little bit, but I am still fairly shy of where I believe I should be. Also I am still maxed out on the CPU. Does anyone have any ideas? I am really stuck on this. Thanks.

    Read the article

  • Microsoft Word 2007 restarts the installer upon exiting on Windows XP

    - by leeand00
    A user complained that they were having issues with MS Office 2007, and that the installation / configuration dialog kept appearing. I already tried uninstalling Office 2007 and I ended up needing to use the Microsoft Fix It package to uninstall it, since using the control panel failed. I close Microsoft Word. The Installer for Microsoft Office inexplicably opens. I then get a dialog that says I need to reboot. So I restart... Start Microsoft Word, Word starts up, and everything appears to be fine. I close word, and nothing much happens this is on the administrator account. I think everything is fixed so I call the user over to come try their account out. We login as the user, and the user tries to open a document in Word. The Configuration Progress Window reappears. It runs...and then Word appears. I close it and it appears to work, no window. I open it again and the Configuration Progress window appears yet again... Then Word opens up again, if I exit out and open up again I get the same Configuration Progress window. I have no idea what is causing the Configuration Progress Window to come up.. Update: I attempted to install two updates: Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2687400) Update for the 2007 Microsoft Office System (KB967642) Both of these updates failed. Update: I attempted to install KB967642 manually and it failed.

    Read the article

  • MD RAID 1 with external bitmap doesn't fully resync

    - by user64744
    I have an interesting configuration: dual boot system with a RAID 1 that needs to be visible in both Windows and Linux. The Windows install is Win 7 Enterprise, and the Linux install is Kubuntu 10.04. To get the RAID to work, I set it up using Windows's "Dynamic Disks" RAID 1, and brought it up in Linux using MD with no persistent superblock, and a write-intent bitmap on another partition. (Without this bitmap, MD had no way of knowing that the array was in sync, and would do a complete resync every time the array started.) The array is assembled like so: mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 I expected that the first time I ran this command, it would resync the array, write out a bitmap with no dirty chunks, and all would be good. This wasn't the case: after completing the resync, the bitmap was mostly clean, but about 5% dirty blocks remained, as revealed by mdadm -X /var/local/md1.bitmap I didn't mount the filesystem on /dev/md1 or touch it in any other way. I then found that stopping and restarting the array: mdadm --stop /dev/md1 mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 did indeed read in the bitmap, with an ensuing resync that went quickly because most of the blocks were marked clean. The confusing part is that this resync further reduced the number of dirty blocks, but still did not remove all of them. By repeatedly stopping and restarting I could slowly bring the dirty block count down to around 0.6%, where it seemed to level out. Any ideas what could be causing this? It smells to me of a race condition somewhere that leads to blocks either being skipped over during synchronization or not properly cleared from the bitmap, but I really have no evidence to prove this. It doesn't look like hardware issues since both drives are new and have zero read errors and reallocated sectors reported by smartctl -a.

    Read the article

  • how do you install php-devel

    - by user962449
    I keep getting dependency issues when I try to run yum install php-devel yum install --skip-broken php-devel .... --> Finished Dependency Resolution php-5.1.6-32.el5.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-32.el5 is needed by package php-5.1.6-32.el5.i386 (base) php-cli-5.1.6-32.el5.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-32.el5 is needed by package php-cli-5.1.6-32.el5.i386 (base) --> Running transaction check ---> Package php.i386 0:5.1.6-32.el5 set to be updated --> Processing Dependency: php = 5.1.6-32.el5 for package: php-devel ---> Package php-cli.i386 0:5.1.6-32.el5 set to be updated --> Finished Dependency Resolution php-devel-5.1.6-32.el5.i386 from base has depsolving problems --> Missing Dependency: php = 5.1.6-32.el5 is needed by package php-devel-5.1.6-32.el5.i386 (base) Packages skipped because of dependency problems: autoconf-2.59-12.noarch from base automake-1.9.6-2.3.el5.noarch from base imake-1.0.2-3.i386 from base php-5.1.6-32.el5.i386 from base php-cli-5.1.6-32.el5.i386 from base php-devel-5.1.6-32.el5.i386 from base Any ideas?

    Read the article

  • Office 2010 Trusted Locations not working after restart

    - by Josh King
    In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

    Read the article

  • winbind failing after a semi-random amount of time

    - by The Digital Ninja
    I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

    Read the article

  • 2 servers on 2 networks in same office

    - by irot
    Hello Gents, My office doesn't have a "server guy" in employ, so I'm stuck with having to fix server issues for now. There are 2 servers in our office, both are file/web servers only accessible via LAN. They are currently on the same network, so no issue there. Problem is, we recently got a static IP to use, but it's with a different ISP, so now we have 2 routers in our office. I would like to open one of the servers to the public as a web/FTP server. But if I hook a server up to the new router, users will no longer be able to access the files shared on that server (because they're on different networks). How can I go about making one server accessible to the public using the static IP line, but still able to share the files on it to the users connected to the other network? The server I want to make public is running Windows Server 2008, the other server Windows Server 2003. And as far as I know, IP addresses are assigned by the router. I'm just a developer, don't know much about networking. Thank you in advance.

    Read the article

  • RDP or SSH connection trough Windows 2008 server VPN hang after a while

    - by xt4fs
    I have been experiencing a very strange issue with our VPN setup on Windows Server 2008. That server is running as a Xen Virtual Machine. We use it for two purposes, permit our mobile workers to connect to another server hosted somewhere else that only allow that ip, and use it to RDP or ssh to many other virtual machine on the same server. The server has no performance issue and still a load of memory free. All other virtual machine has no problem whatsoever. Many of those virtual machine have public IP (web servers) and all their firewall are set to allow only ssh connection or RDP connection from their local interface. When I am connecting directly with either ssh or RDP to one of the other virtual machine everything run without any issues. However, when I am doing so through the VPN after some time the connection just hang, it usually continue after some time (5 or 10 minutes). It seems as more there is network usage more often it happen to a point where it is completely unusable. The worst thing I can do to hang it faster is to actually ping the vpn client IP from the local network, after some time the latency increase until it hang. This happen even if I do RDP to the local ip of the VPN server trough the VPN. The server report no problem and if I disconnect to the vpn and reconnect right away everything is alright. There is nothing wrong in the VPN server log. I have taught at the beginning that it could have been an issue with the Host server so I try to RDP,ssh directly to the guest and I have experience no issue while doing this, so it really seems to be a problem with the VPN server on Windows server 2008. Another very weird thing is it does not seems to be of any issue if you only do Internet (NAT) without trying to connect to any local ips.

    Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >