Search Results

Search found 37487 results on 1500 pages for 'kate moss open space'.

Page 320/1500 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• Install Quartz.Net as a windows service and Test installation

  - by Tarun Arora

  In this blog post I’ll be covering, 01: Where to download Quartz.net from 02: How to install Quartz.net as a Windows service 03: Test the Quartz.net Installation If you are new to Quartz.net I would recommend reading the blog post on a brief introduction to Quartz.net. 01 – Where to download Quartz.net? http://sourceforge.net/projects/quartznet/files/quartznet/       Currently version  Quartz.Net 2.0.1 is the recommended download version. 02 – How to install Quartz.net as a Windows service         Go to the download location and unzip the Quartz.net package Navigate to the folder Quartz.Net \ Server \ bin – This is where you will find different .net version installers of the quartz.net packages. For example in the screen shot above, you can see the Quartz.net .net 3.5 and .net 4 packages. Open up the Quartz.net .net 4.0 folder, this folder contains the files you need to install Quartz.net as a windows service Copy the contents of the folder Downloads\Quartz.NET-2.0.1\server\bin\4.0 to the folder %program files%\Quartz.net   5. Open up a new CMD as an administrator and run the below command to install Quartz.net as a windows service /> Quartz.Server.exe install 6. How do I know that Quartz.Net service has installed as a Windows service? Go to run prompt and type ‘services.msc’ you should now see all the windows services installed on your machine. Navigate down to look for Quartz.Net. The service installs itself as an automatic startup Type and log on as ‘Local System’. You can easily change this to your prefer account that you would like to run the service as. If you wanted to name the Quartz service something else then that’s also possible… Can I change the default display name of the quartz.net windows service? Yes, you can! Navigate to C:\Program Files (x86)\Quartz.Net\ and open up the config file ‘quartz.config’ - You can change the instance name - You can change the default thread count of 10 - The port that the service listens to (by default this is port 555) A blog post on more configuration details can be found here. 03 – Test Quartz.Net windows service installation So, I have installed Quartz.Net as a windows service, how do I test whether my installation has been successful. Open up cmd as an administrator and run the below command, C:\Program Files (x86)\Quartz.Net> Quartz.Server.exe –i Since by default the Quartz.net windows service writes INFO level diagnostics (this can be changed from Quartz.Server.exe.config) you should see the service information show up on the console. For instance in the example above I can see that the service is running in a NON CLUSTERED mode, its currently not started and is currently in standby mode with 0 number of jobs executed so far… This was second in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering how to run your first scheduled task using Quartz.net windows service. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

  Read the article

• Add Keyboard Input Language to Ubuntu

  - by Matthew Guay

  Want to type in multiple languages in Ubuntu?  Here we’ll show you how you can easily add and switch between multiple keyboard layouts in Ubuntu. Add a Keyboard Language To add a keyboard language, open the System menu, select Preferences, and then select Keyboard. In the Keyboard Preferences dialog, select the Layouts tab, and click Add.   You can select a country and then choose an language and keyboard variant.  Note that some countries, such as the United States, may show several languages.  Once you’ve made your selection, you can preview it on the sample keyboard displayed below the menu. Alternately, on the second tab, select a language and then choose a variant.  Click Add when you’ve made your selection. Now you’ll notice that there are two languages listed in the Keyboard Preferences, and they’re both ready to use immediately.  You can add more if you wish, or close the dialog. Switch Between Languages When you have multiple input languages installed, you’ll notice a new icon in your system tray on the top right.  It will show the abbreviation of the country and/or language name that is currently selected.  Click the icon to change the language. Right-click the dialog to view available languages (listed under Groups), open the Keyboard Preferences dialog again, or show the current layout. If you select Show Current Layout you’ll see a window with the keyboard preview we saw previously when setting the keyboard layout.  You can even print this layout preview out to help you remember a layout if you wish. Change Keyboard Shortcuts to Switch Languages By default, you can switch input languages in Ubuntu from the keyboard by pressing both Alt keys together.  Many users are already used to the default Alt+Switch combination to switch input languages in Windows, and we can add that in Ubuntu.  Open the keyboard preferences dialog, select the Layout tab, and click Options. Click the plus sign beside Key(s) to change layout, and select Alt+Shift.  Click Close, and you can now use this familiar shortcut to switch input languages. The layout options dialog offers many more neat keyboard shortcuts and options.  One especially neat option was the option to use a keyboard led to show when we’re using the alternate keyboard layout.  We selected the ScrollLock light since it’s hardly used today, and now it lights up when we’re using our other input language.   Conclusion Whether you regularly type in multiple languages or only need to enter an occasional character from an alternate keyboard layout, Ubuntu’s keyboard settings make it easy to make your keyboard work the way you want.  And since you can even preview and print a keyboard layout, you can even remember an alternate keyboard’s layout if it’s not printed on your keyboard. Windows users, you’re not left behind, either.  Check out our tutorial on how to Add keyboard languages to XP, Vista, and Windows 7. Similar Articles Productive Geek Tips Add keyboard languages to XP, Vista, and Windows 7Assign a Hotkey to Open a Terminal Window in UbuntuWhat is ctfmon.exe And Why Is It Running?Keyboard Shortcuts for VMware WorkstationInput Director Controls Multiple Windows Machines with One Keyboard and Mouse TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12

  Read the article

• Add the Recycle Bin to Start Menu in Windows 7

  - by Matthew Guay

  Have you ever tried to open the Recycle Bin by searching for “recycle bin” in the Start menu search, only to find nothing?  Here’s a quick trick that will let you find the Recycle Bin directly from your Windows Start menu search. The Start menu search may be the best timesaver ever added to Windows.  In fact, we use it so much that it seems painful to manually search for a program when using Windows XP or older versions of Windows.  You can easily find files, folders, programs and more through the Start menu search in both Vista and Windows 7. However, one thing you cannot find is the recycle bin; if you enter this in the start menu search it will not find it. Here’s how to add the Recycle Bin to your Start menu search. What to do To access the Recycle Bin from the Start menu search, we need to add a shortcut to the start menu.  Windows includes a personal Start menu folder, and an All Users start menu folder which all users on the computer can see.  This trick only works in the personal Start menu folder. Open up an Explorer window (Simply click the Computer link in the start menu), click the white part of the address bar, and, enter the following (substitute your username for your_user_name) and hit Enter. C:\Users\your_user_name\AppData\Roaming\Microsoft\Windows\Start Menu Now, right-click in the folder, select New, and then click Shortcut. In the location box, enter the following: explorer.exe shell:RecycleBinFolder When you’ve done this, click Next. Now, enter a name for the shortcut.  You can enter Recycle Bin like the standard shortcut, or you could name it something else such as Trash…if that’s easier for you to remember.  Click Finish when your done. By default it will have a folder icon.  Let’s switch that to the standard Recycle Bin icon.  Right-click on the new shortcut and click Properties. Click Change Icon… Type the following in the “Look for icons in this file:” box, and press the Enter key on your keyboard: %SystemRoot%\system32\imageres.dll Now, scroll and find the Recycle Bin icon and click Ok. Click Ok in the previous dialog, and now your Recycle Bin shortcut has the correct icon.   You can even have multiple shortcuts with different names, so when you searched either Recycle Bin or Trash it would come up in the Start menu.  To do that, simply repeat these directions, and enter another name of your choice at the prompt.  Here we have both a Recycle Bin and a Trash icon. Now, when you enter Recycle Bin (or trash, depending on what you chose) in your Start menu search, you will see it at the top of your Start menu.  Simply press Enter or click on the icon to open the Recycle Bin.   This trick will work in Windows Vista too!  Simply follow these same directions, and you can add the Recycle Bin to your Vista Start menu and find it via search. This is a simple trick, but may make it  much easier for you to open your Recycle Bin directly from your Windows Vista or 7 Start menu search.  If you’re using Windows 7, you can also check out our directions on how to Add the Recycle Bin to the Taskbar in Windows 7. Similar Articles Productive Geek Tips Hide, Delete, or Destroy the Recycle Bin Icon in Windows 7 or VistaDisable Deletion of the Recycle Bin in Windows VistaHide the Recycle Bin Icon Text on Windows VistaAdd the Recycle Bin to the Taskbar in Windows 7Resize the Recycle Bin in XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• [Windows 8] Update TextBox’s binding on TextChanged

  - by Benjamin Roux

  Since UpdateSourceTrigger is not available in WinRT we cannot update the text’s binding of a TextBox at will (or at least not easily) especially when using MVVM (I surely don’t want to write behind-code to do that in each of my apps !). Since this kind of demand is frequent (for example to disable of button if the TextBox is empty) I decided to create some attached properties to to simulate this missing behavior. namespace Indeed.Controls { public static class TextBoxEx { public static string GetRealTimeText(TextBox obj) { return (string)obj.GetValue(RealTimeTextProperty); } public static void SetRealTimeText(TextBox obj, string value) { obj.SetValue(RealTimeTextProperty, value); } public static readonly DependencyProperty RealTimeTextProperty = DependencyProperty.RegisterAttached("RealTimeText", typeof(string), typeof(TextBoxEx), null); public static bool GetIsAutoUpdate(TextBox obj) { return (bool)obj.GetValue(IsAutoUpdateProperty); } public static void SetIsAutoUpdate(TextBox obj, bool value) { obj.SetValue(IsAutoUpdateProperty, value); } public static readonly DependencyProperty IsAutoUpdateProperty = DependencyProperty.RegisterAttached("IsAutoUpdate", typeof(bool), typeof(TextBoxEx), new PropertyMetadata(false, OnIsAutoUpdateChanged)); private static void OnIsAutoUpdateChanged(DependencyObject sender, DependencyPropertyChangedEventArgs e) { var value = (bool)e.NewValue; var textbox = (TextBox)sender; if (value) { Observable.FromEventPattern<TextChangedEventHandler, TextChangedEventArgs>( o => textbox.TextChanged += o, o => textbox.TextChanged -= o) .Do(_ => textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text)) .Subscribe(); } } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is composed of two attached properties. The first one “RealTimeText” reflects the text in real time (updated after each TextChanged event). The second one is only used to enable the functionality. To subscribe to the TextChanged event I used Reactive Extensions (Rx-Metro package in Nuget). If you’re not familiar with this framework just replace the code with a simple: textbox.TextChanged += textbox.SetValue(TextBoxEx.RealTimeTextProperty, textbox.Text); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } To use these attached properties, it’s fairly simple <TextBox Text="{Binding Path=MyProperty, Mode=TwoWay}" ic:TextBoxEx.IsAutoUpdate="True" ic:TextBoxEx.RealTimeText="{Binding Path=MyProperty, Mode=TwoWay}" /> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Just make sure to create a binding (in TwoWay) for both Text and RealTimeText. Hope this helps !

  Read the article

• Create a Persistent Bootable Ubuntu USB Flash Drive

  - by Trevor Bekolay

  Don’t feel like reinstalling an antivirus program every time you boot up your Ubuntu flash drive? We’ll show you how to create a bootable Ubuntu flash drive that will remember your settings, installed programs, and more! Previously, we showed you how to create a bootable Ubuntu flash drive that would reset to its initial state every time you booted it up. This is great if you’re worried about messing something up, and want to start fresh every time you start tinkering with Ubuntu. However, if you’re using the Ubuntu flash drive to diagnose and solve problems with your PC, you might find that a lot of problems require guess-and-test cycles. It would be great if the settings you change in Ubuntu and the programs you install stay installed the next time you boot it up. Fortunately, Universal USB Installer, a great little program from Pen Drive Linux, can do just that! Note: You will need a USB drive at least 2 GB large. Make sure you back up any files on the flash drive because this process will format the drive, removing any files currently on it. Once Ubuntu has been installed on the flash drive, you can move those files back if there is enough space. Put Ubuntu on your flash drive Universal-USB-Installer.exe does not need to be installed, so just double click on it to run it wherever you downloaded it. Click Yes if you get a UAC prompt, and you will be greeted with this window. Click I Agree. In the drop-down box on the next screen, select Ubuntu 9.10 Desktop i386. Don’t worry if you normally use 64-bit operating systems – the 32-bit version of Ubuntu 9.10 will still work fine. Some useful tools do not have 64-bit versions, so unless you’re planning on switching to Ubuntu permanently, the 32-bit version will work best. If you don’t have a copy of the Ubuntu 9.10 CD downloaded, then click on the checkbox to Download the ISO. You’ll be prompted to launch a web browser; click Yes. The download should start immediately. When it’s finished, return the the Universal USB Installer and click on Browse to navigate to the ISO file you just downloaded. Click OK and the text field will be populated with the path to the ISO file. Select the drive letter that corresponds to the flash drive that you would like to use from the dropdown box. If you’ve backed up the files on this drive, we recommend checking the box to format the drive. Finally, you have to choose how much space you would like to set aside for the settings and programs that will be stored on the flash drive. Considering that Ubuntu itself only takes up around 700 MB, 1 GB should be plenty, but we’re choosing 2 GB in this example because we have lots of space on this USB drive. Click on the Create button and then make yourself a sandwich – it will take some time to install no matter how fast your PC is. Eventually it will finish. Click Close. Now you have a flash drive that will boot into a fully capable Ubuntu installation, and any changes you make will persist the next time you boot it up! Boot into Ubuntu If you’re not sure how to set your computer to boot using the USB drive, then check out the How to Boot Into Ubuntu section of our previous article on creating bootable USB drives, or refer to your motherboard’s manual. Once your computer is set to boot using the USB drive, you’ll be greeted with splash screen with some options. Press Enter to boot into Ubuntu. The first time you do this, it may take some time to boot up. Fortunately, we’ve found that the process speeds up on subsequent boots. You’ll be greeted with the Ubuntu desktop. Now, if you change settings like the desktop resolution, or install a program, those changes will be permanently stored on the USB drive! We installed avast! Antivirus, and on the next boot, found that it was still in the Accessories menu where we left it. Conclusion We think that a bootable Ubuntu USB flash drive is a great tool to have around in case your PC has problems booting otherwise. By having the changes you make persist, you can customize your Ubuntu installation to be the ultimate computer repair toolkit! Download Universal USB Installer from Pen Drive Linux Similar Articles Productive Geek Tips Create a Bootable Ubuntu USB Flash Drive the Easy WayCreate a Bootable Ubuntu 9.10 USB Flash DriveReset Your Ubuntu Password Easily from the Live CDHow-To Geek on Lifehacker: Control Your Computer with Shortcuts & Speed Up Vista SetupHow To Setup a USB Flash Drive to Install Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday Generate Stunning Tag Clouds With Tagxedo Install, Remove and HIDE Fonts in Windows 7

  Read the article

• Customizing the processing of ListItems for asp:RadioButtonList with "Flow" layout and "Horizontal"

  - by evovision

  Hi, recently I was asked to add an ability to pad specific elements from each other to a certain distance in RadioButtonList control. Not quite common everyday task I would say :)   Ok, let's get started!   Prerequisites: ASP.NET Page having RadioButtonList control with RepeatLayout="Flow" RepeatDirection="Horizontal" properties set.   Implementation:  The underlying data was coming from another source, so the only fast way to add meta information about padding was the text value itself (yes, not very optimal solution): Id = 1, Name = "This is first element" and for padding we agreed to use <space/> meta tag: Id = 2, Name = "<space padcount="30px"/>This is second padded element"   To handle items rendering in RadioButtonList control I've created custom class and subclassed from it:    public class CustomRadioButtonList : RadioButtonList    {        private Action<ListItem, HtmlTextWriter> _preProcess;         protected override void RenderItem(ListItemType itemType, int repeatIndex, RepeatInfo repeatInfo, HtmlTextWriter writer)        {            if (_preProcess != null)            {                _preProcess(this.Items[repeatIndex], writer);            }             base.RenderItem(itemType, repeatIndex, repeatInfo, writer);        }         public void SetPrePrenderItemFunction(Action<ListItem, HtmlTextWriter> func)        {            _preProcess = func;        }    }   It is pretty straightforward approach, the key is to override RenderItem method. Class has SetPrePrenderItemFunction method which is used to pass custom processing function that takes 2 parameters: ListItem and HtmlTextWriter objects.   Now update existing RadioButtonList control in Default.aspx: add this to beginning of the page:   <%@ Register Namespace="Sample.Controls" TagPrefix="uc1" %>   and update the control to:   <uc1:CustomRadioButtonList ID="customRbl" runat="server" DataValueField="Id" DataTextField="Name"            RepeatLayout="Flow" RepeatDirection="Horizontal"></uc1:CustomRadioButtonList>   Now, from codebehind of the page:   Add regular expression that will be used for parsing:   private Regex _regex = new Regex(@"(?:[<]space padcount\s*?=\s*?(?:'|"")(?<padcount>\d+)(?:(?:\s+)?px)?(?:'|"")\s*?/>)(?<content>.*)?", RegexOptions.IgnoreCase | RegexOptions.Compiled);   and finally setup the processing function in Page_Load:   protected void Page_Load(object sender, EventArgs e)    {        customRbl.DataSource = DataObjects;         customRbl.SetPrePrenderItemFunction((listItem, writer) =>        {            Match match = _regex.Match(listItem.Text);            if (match.Success)            {                writer.Write(string.Format(@"<span style=""padding-left:{0}"">Extreme values: </span>", match.Groups["padcount"].Value + "px"));                 // if you need to pad listitem use code below                //x.Attributes.CssStyle.Add("padding-left", match.Groups["padcount"].Value + "px");                 // remove meta tag from text                listItem.Text = match.Groups["content"].Value;            }        });         customRbl.DataBind();    }   That's it! :)   Run the attached sample application:     P.S.: of course several other approaches could have been used for that purpose including events and the functionality for processing could also be embedded inside control itself. Current solution suits slightly better due some other reasons for situation where it was used, in your case consider this as a kick start for your own implementation :)   Source application: CustomRadioButtonList.zip

  Read the article

• UPK 3.6.1 (is Coming)

  - by marc.santosusso

  In anticipation of the release of UPK 3.6.1, I'd like to briefly describe some of the features that will be available in this new version. Topic Editor in Tabs Topic Editors now open in tabs instead of separate Developer windows. This offers several improvements: First, the bubble editor can be docked and resized in the same way as other editor panes. That's right, you can resize the bubble editor! The second enhancement that this changes brings is an improved undo and redo which allows each action to be undone and redone in the Topic Editor. New Sound Editor The topic and web page editors include a new sound editor with all the bells and whistles necessary to record, edit, import, and export, sound. Sound can be captured during topic recording--which is great for a Subject Matter Expert (SME) to narrate what they're recording--or after the topic has been recorded. Sound can also be added to web pages and played on the concept panes of modules, sections and topics. Turn off bubbles in Topics Authors may opt to hide bubbles either per frame or for an entire topic. When you want to draw a user's attention to the content on the screen instead of the bubble. This feature works extremely well in conjunction with the new sound capabilities. For instance, consider recording conceptual information with narration and no bubbles. Presentation Output UPK content can be published as a Presentation in Microsoft PowerPoint format. Publishing for Presentation will create a presentation for each topic published. The presentation template can be customized Using the same methods offered for the UPK document outputs, allowing your UPK-generated presentations to match your corporate branding. Autosave and Recovery The Developer will automatically save your work as often as you would like. This affords authors the ability to recover these automatically saved documents if their system or UPK were to close unexpectedly. The Developer defaults to save open documents every ten minutes. Package Editor Enhancement Files in packages will now open in the associated application when double-clicked. Authors can also choose to "Open with..." from the context menu (AKA right click menu.) See It! Window See It! mode may now be launched in a non-fullscreen window. This is available from the kp.html file in any Player package. This version of See It! mode offers on-screen navigation controls including previous frame, next frame, pause etc. Firefox Enhancments The UPK Player will now offer both Do It! mode and sound playback when viewed using Firefox web browser. Player Support for Safari The UPK Player is now fully supported on the Safari web browser for both Mac OS and Windows platforms. Keep document checked out Authors may choose to keep a document checked out when performing a check in. This allows an author to have a new version created on the server and continue editing. Close button on individual tabs A close button has been added to the tabs making it easier to close a specific tab. Outline Editor Enhancements Authors will have the option to prevent concepts from immediately displaying in the Developer when an outline item is selected. This makes it faster to move around in the outline editor. Tell us which feature you're most excited to use in the comments.

  Read the article

• No, iCloud Isn’t Backing Them All Up: How to Manage Photos on Your iPhone or iPad

  - by Chris Hoffman

  Are the photos you take with your iPhone or iPad backed up in case you lose your device? If you’re just relying on iCloud to manage your important memories, your photos may not be backed up at all. Apple’s iCloud has a photo-syncing feature in the form of “Photo Stream,” but Photo Stream doesn’t actually perform any long-term backups of your photos. iCloud’s Photo Backup Limitations Assuming you’ve set up iCloud on your iPhone or iPad, your device is using a feature called “Photo Stream” to automatically upload the photos you take to your iCloud storage and sync them across your devices. Unfortunately, there are some big limitations here. 1000 Photos: Photo Stream only backs up the latest 1000 photos. Do you have 1500 photos in your Camera Roll folder on your phone? If so, only the latest 1000 photos are stored in your iCloud account online. If you don’t have those photos backed up elsewhere, you’ll lose them when you lose your phone. If you have 1000 photos and take one more, the oldest photo will be removed from your iCloud Photo Stream. 30 Days: Apple also states that photos in your Photo Stream will be automatically deleted after 30 days “to give your devices plenty of time to connect and download them.” Some people report photos aren’t deleted after 30 days, but it’s clear you shouldn’t rely on iCloud for more than 30 days of storage. iCloud Storage Limits: Apple only gives you 5 GB of iCloud storage space for free, and this is shared between backups, documents, and all other iCloud data. This 5 GB can fill up pretty quickly. If your iCloud storage is full and you haven’t purchased any more storage more from Apple, your photos aren’t being backed up. Videos Aren’t Included: Photo Stream doesn’t include videos, so any videos you take aren’t automatically backed up. It’s clear that iCloud’s Photo Stream isn’t designed as a long-term way to store your photos, just a convenient way to access recent photos on all your devices before you back them up for real. iCloud’s Photo Stream is Designed for Desktop Backups If you have a Mac, you can launch iPhoto and enable the Automatic Import option under Photo Stream in its preferences pane. Assuming your Mac is on and connected to the Internet, iPhoto will automatically download photos from your photo stream and make local backups of them on your hard drive. You’ll then have to back up your photos manually so you don’t lose them if your Mac’s hard drive ever fails. If you have a Windows PC, you can install the iCloud Control Panel, which will create a Photo Stream folder on your PC. Your photos will be automatically downloaded to this folder and stored in it. You’ll want to back up your photos so you don’t lose them if your PC’s hard drive ever fails. Photo Stream is clearly designed to be used along with a desktop application. Photo Stream temporarily backs up your photos to iCloud so iPhoto or iCloud Control Panel can download them to your Mac or PC and make a local backup before they’re deleted. You could also use iTunes to sync your photos from your device to your PC or Mac, but we don’t really recommend it — you should never have to use iTunes. How to Actually Back Up All Your Photos Online So Photo Stream is actually pretty inconvenient — or, at least, it’s just a way to temporarily sync photos between your devices without storing them long-term. But what if you actually want to automatically back up your photos online without them being deleted automatically? The solution here is a third-party app that does this for you, offering the automatic photo uploads with long-term storage. There are several good services with apps in the App Store: Dropbox: Dropbox’s Camera Upload feature allows you to automatically upload the photos — and videos — you take to your Dropbox account. They’ll be easily accessible anywhere there’s a Dropbox app and you can get much more free Dropbox storage than you can iCloud storage. Dropbox will never automatically delete your old photos. Google+: Google+ offers photo and video backups with its Auto Upload feature, too. Photos will be stored in your Google+ Photos — formerly Picasa Web Albums — and will be marked as private by default so no one else can view them. Full-size photos will count against your free 15 GB of Google account storage space, but you can also choose to upload an unlimited amount of photos at a smaller resolution. Flickr: The Flickr app is no longer a mess. Flickr offers an Auto Upload feature for uploading full-size photos you take and free Flickr accounts offer a massive 1 TB of storage for you to store your photos. The massive amount of free storage alone makes Flickr worth a look. Use any of these services and you’ll get an online, automatic photo backup solution you can rely on. You’ll get a good chunk of free space, your photos will never be automatically deleted, and you can easily access them from any device. You won’t have to worry about storing local copies of your photos and backing them up manually. Apple should fix this mess and offer a better solution for long-term photo backup, especially considering the limitations aren’t immediately obvious to users. Until they do, third-party apps are ready to step in and take their place. You can also automatically back up your photos to the web on Android with Google+’s Auto Upload or Dropbox’s Camera Upload. Image Credit: Simon Yeo on Flickr     

  Read the article

• Java Spotlight Episode 57: Live From #Devoxx - Ben Evans and Martijn Verburg of the London JUG with Yara Senger of SouJava

  - by Roger Brinkley

  Tweet Live from Devoxx 11,  an interview with Ben Evans and Martijn Verburg from the London JUG along with  Yara Senger from the SouJava JUG on the JCP Executive Committee Elections, JSR 248, and Adopt-a-JSR program. Both the London JUG and SouJava JUG are JCP Standard Edition Executive Committee Members. Joining us this week on the Java All Star Developer Panel are Geertjan Wielenga, Principal Product Manger in Oracle Developer Tools; Stephen Chin, Java Champion and Java FX expert; and Antonio Goncalves, Paris JUG leader. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Netbeans 7.1 JDK 7 upgrade tools Netbeans First Patch Program OpenJFX approved as an OpenJDK project Devoxx France April 18-20, 2012 Events Nov 22-25, OTN Developer Days in the Nordics Nov 22-23, Goto Conference, Prague Dec 6-8, Java One Brazil, Sao Paulo Feature interview Ben Evans has lived in "Interesting Times" in technology - he was the lead performance testing engineer for the Google IPO, worked on the initial UK trials of 3G networks with BT, built award-winning websites for some of Hollywood's biggest hits of the 90s, rearchitected and reimagined technology helping some of the most vulnerable people in the UK and has worked on everything from some of the UKs very first ecommerce sites, through to multi-billion dollar currency trading systems. He helps to run the London Java Community, and represents the JUG on the Java SE/EE Executive Committee. His first book "The Well-Grounded Java Developer" (with Martijn Verburg) has just been published by Manning. Martijn Verburg (aka 'the Diabolical Developer') herds Cats in the Java/open source communities and is constantly humbled by the creative power to be found there. Currently he resides in London where he co-leads the London JUG (a JCP EC member), runs a couple of open source projects & drinks too much beer at his local pub. You can find him online moderating at the Javaranch or discussing (ranting?) subjects on the Prgorammers Stack Exchange site. Most recently he's become a regular speaker at conferences on Java, open source and software development and has recently wrapped up his first Manning title - "The Well-Grounded Java Developer" with his co-author Ben Evans. Yara Senger is the partner and director of teacher education and Globalcode, graduated from the University of Sao Paulo, Sao Carlos, has significant experience in Brazil and abroad in developing solutions to critical Java. She is the co-creator of Java programs Academy and Academy of Web Developer, accumulating over 1000 hours in the classroom teaching Java. She currently serves as the President of Sou Java. In this interview Ben, Martijn, and Yara talk about the JCP Executive Committee Elections, JSR 348, and the Adopt-a-JSR program. Mail Bag What's Cool Show Transcripts Transcript for this show is available here when available.

  Read the article

• XNA Notes 004

  - by George Clingerman

  The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

  Read the article

• SharePoint OCR image files indexing

  Introduction This article describes how to setup indexing of the image files (including TIFF, PDF, JPEG, BMP...) using OCR technology. The indexing described below utilizes Microsoft IFilter technology and as such is not specific to SharePoint, but can be used with any product that uses Microsoft indexing: Microsoft Search, Desktop search, SQL Server search, and through the plug-ins with Google desktop search. I however use it with Microsoft Windows SharePoint Services 2003. For those other products, the registration may need to be slightly different. Background  One of the projects I was working on required a storage of old documents scanned into PDF files. Then there was a separate team of people responsible for providing a tags for a search engine so those image documents could be found. The whole process was clumsy, labor intensive, and error prone. That was what started me on my exploration path. OCR The first search I fired was for the Open Source OCR products. Pretty quickly, I narrowed it down to TESSERACT (http://code.google.com/p/tesseract-ocr/). Tesseract is an orphaned brain child of HP that worked on it from 1985 to 1995. Then it was moved to the Open Source, and now if I understand it correctly, Google is working on it. With credentials like that, it's no wonder that Tesseract scores one of the highest marks on OCR recognition and accuracy. After downloading and struggling just a bit, I got Tesseract to work. The struggling part was that the home page claims that its base input format is a TIFF file. May be my TIFFs were bad, but I was able to get it to work only for BMP files. Image files conversion So now that I have an OCR that can convert BMP files into text, how do I get text out of the image PDF files? One more search, and I settled down on ImageMagic (http://www.imagemagick.org/). This is another wonderful Open Source utility that can convert any file into image. It did work out of the box, converting any TIFF files into bitmaps, but to get PDF files converted, it requires a GhostScript (http://mirror.cs.wisc.edu/pub/mirrors/ghost/GPL/gs864/gs864w32.exe). Dealing with text PDFs With that utility installed, I was cooking - I can convert any file (in particular PDF and TIFF) into bitmap, and then I can extract the text out of the bitmap. The only consideration was to somehow treat PDF files containing text differently - after all, OCR is very computation intensive and somewhat error prone even with perfect image quality and resolution. So another quick search, and I have a PDFTOTEXT (ftp://ftp.foolabs.com/pub/xpdf/xpdf-3.02pl4-win32.zip) - thank God for Open Source! With these guys, I can pull text out of PDF in an eye blink. However, I would get nothing for pure image PDFs, but I already have a solution for that! Batch process It took another 15 minutes to setup a batch script to automate the process: Check the file extension If file is a PDF file try to extract text out of it if there is more than certain amount of text in the file - done! if there is no text, convert first page into bitmap run OCR on the bitmap For any other file type, convert file into bitmap Run OCR on the bitmap Once you unzip the attached project, check out the bin\OCR.BAT file. It will create a temporary file in the directory where your source file is with the same name + the '.txt' extension.Continue span.fullpost {display:none;}

  Read the article

• Clean up after Visual Studio

  - by psheriff

  As programmer’s we know that if we create a temporary file during the running of our application we need to make sure it is removed when the application or process is complete. We do this, but why can’t Microsoft do it? Visual Studio leaves tons of temporary files all over your hard drive. This is why, over time, your computer loses hard disk space. This blog post will show you some of the most common places where these files are left and which ones you can safely delete..NET Left OversVisual Studio is a great development environment for creating applications quickly. However, it will leave a lot of miscellaneous files all over your hard drive. There are a few locations on your hard drive that you should be checking to see if there are left-over folders or files that you can delete. I have attempted to gather as much data as I can about the various versions of .NET and operating systems. Of course, your mileage may vary on the folders and files I list here. In fact, this problem is so prevalent that PDSA has created a Computer Cleaner specifically for the Visual Studio developer.  Instructions for downloading our PDSA Developer Utilities (of which Computer Cleaner is one) are at the end of this blog entry.Each version of Visual Studio will create “temporary” files in different folders. The problem is that the files created are not always “temporary”. Most of the time these files do not get cleaned up like they should. Let’s look at some of the folders that you should periodically review and delete files within these folders.Temporary ASP.NET FilesAs you create and run ASP.NET applications from Visual Studio temporary files are placed into the <sysdrive>:\Windows\Microsoft.NET\Framework[64]\<vernum>\Temporary ASP.NET Files folder. The folders and files under this folder can be removed with no harm to your development computer. Do not remove the "Temporary ASP.NET Files" folder itself, just the folders underneath this folder. If you use IIS for ASP.NET development, you may need to run the iisreset.exe utility from the command prompt prior to deleting any files/folder under this folder. IIS will sometimes keep files in use in this folder and iisreset will release the locks so the files/folders can be deleted.Website CacheThis folder is similar to the ASP.NET Temporary Files folder in that it contains files from ASP.NET applications run from Visual Studio. This folder is located in each users local settings folder. The location will be a little different on each operating system. For example on Windows Vista/Windows 7, the folder is located at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\WebsiteCache. If you are running Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\Microsoft\WebsiteCache. Check these locations periodically and delete all files and folders under this directory.Visual Studio BackupThis backup folder is used by Visual Studio to store temporary files while you develop in Visual Studio. This folder never gets cleaned out, so you should periodically delete all files and folders under this directory. On Windows XP, this folder is located at <sysdrive>:\Documents and Settings\<UserName>\My Documents\Visual Studio 200[5|8]\Backup Files. On Windows Vista/Windows 7 this folder is located at <sysdrive>:\Users\<UserName>\Documents\Visual Studio 200[5|8]\.Assembly CacheNo, this is not the global assembly cache (GAC). It appears that this cache is only created when doing WPF or Silverlight development with Visual Studio 2008 or Visual Studio 2010. This folder is located in <sysdrive>:\ Users\<UserName>\AppData\Local\assembly\dl3 on Windows Vista/Windows 7. On Windows XP this folder is located at <sysdrive>:\ Documents and Settings\<UserName>\Local Settings\Application Data\assembly. If you have not done any WPF or Silverlight development, you may not find this particular folder on your machine.Project AssembliesThis is yet another folder where Visual Studio stores temporary files. You will find a folder for each project you have opened and worked on. This folder is located at <sysdrive>:\Documents and Settings\<UserName>Local Settings\Application Data\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies on Windows XP. On Microsoft Vista/Windows 7 you will find this folder at <sysdrive>:\Users\<UserName>\AppData\Local\Microsoft\Visual Studio\[8|9].0\ProjectAssemblies.Remember not all of these folders will appear on your particular machine. Which ones do show up will depend on what version of Visual Studio you are using, whether or not you are doing desktop or web development, and the operating system you are using.SummaryTaking the time to periodically clean up after Visual Studio will aid in keeping your computer running quickly and increase the space on your hard drive. Another place to make sure you are cleaning up is your TEMP folder. Check your OS settings for the location of your particular TEMP folder and be sure to delete any files in here that are not in use. I routinely clean up the files and folders described in this blog post and I find that I actually eliminate errors in Visual Studio and I increase my hard disk space.NEW! PDSA has just published a “pre-release” of our PDSA Developer Utilities at http://www.pdsa.com/DeveloperUtilities that contains a Computer Cleaner utility which will clean up the above-mentioned folders, as well as a lot of other miscellaneous folders that get Visual Studio build-up. You can download a free trial at http://www.pdsa.com/DeveloperUtilities. If you wish to purchase our utilities through the month of November, 2011 you can use the RSVP code: DUNOV11 to get them for only $39. This is $40 off the regular price.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Developer Machine Clean Up” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• Another sound not working post

  - by Thomas Smart

  Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

  Read the article

• SQLAuthority News – Storing Data and Files in Cloud – Dropbox – Personal Technology Tip

  - by pinaldave

  I thought long and hard about doing a Personal Technology Tips series for this blog.  I have so many tips I’d like to share.  I am on my computer almost all day, every day, so I have a treasure trove of interesting tidbits I like to share if given the chance.  The only thing holding me back – which tip to share first?  The first tip obviously has the weight of seeming like the most important.  But this would mean choosing amongst my favorite tricks and shortcuts.  This is a hard task. Source: Dropbox.com My Dropbox I have finally decided, though, and have determined that the first Personal Technology Tip may not be the most secret or even trickier to master – in fact, it is probably the easiest.  My today’s Personal Technology Tip is Dropbox. I hope that all of you are nodding along in recognition right now.  If you do not use Dropbox, or have not even heard of it before, get on the internet and find their site.  You won’t be disappointed.  A quick recap for those in the dark: Dropbox is an online storage site with a lot of additional syncing and cloud-computing capabilities.  Now that we’ve covered the basics, let’s explore some of my favorite options in Dropbox. Collaborate with All The first thing I love about Dropbox is the ability it gives you to collaborate with others.  You can share files easily with other Dropbox users, and they can alter them, share them with you, all while keeping track of different versions in on easy place.  I’d like to see anyone try to accomplish that key idea – “easily” – using e-mail versions and multiple computers.  It’s even difficult to accomplish using a shared network. Afraid that this kind of ease looks too good to be true?  Afraid that maybe there isn’t enough storage space, or the user interface is confusing?  Think again.  There is plenty of space – you can get 2 GB with just a free account, and upgrades are inexpensive and go up to 100 GB of storage.  And the user interface is so easy that anyone can learn to use it. What I use Dropbox for I love Dropbox because I give a lot of presentations and often they are far from home.  I can keep my presentations on Dropbox and have easy access to them anywhere, without needing to have my whole computer with me.  This is just one small way that you can use Dropbox. You can sync your entire hard drive, or hard drives if you have multiple computers (home, work, office, shared), and you can set Dropbox to automatically sync files on a certain timeline, or whenever Dropbox notices that they’ve been changed. Why I love Dropbox Dropbox has plenty of storage, but 2 GB still has a hard time competing with the average desktop’s storage space.  So what if you want to sync most of your files, but only the ones you use the most and share between work and home, and not all your files (especially large files like pictures and videos)?  You can use selective sync to choose which files to sync. Above all, my favorite feature is LanSync.  Dropbox will search your Local Area Network (LAN) for new files and sync them to Dropbox, as well as downloading the new version to all the shared files across the network.  That means that if move around on different computers at work or at home, you will have the same version of the file every time.  Or, other users on the LAN will have access to the new version, which makes collaboration extremely easy. Ref: rzfeeser.com Dropbox has so many other features that I feel like I could create a Personal Technology Tips series devoted entirely to Dropbox.  I’m going to create a bullet list here to make things shorter, but I strongly encourage you to look further into these into options if it sounds like something you would use. Theft Recover Home Security File Hosting and Sharing Portable Dropbox Sync your iCal calendar Password Storage What is your favorite tool and why? I could go on and on, but I will end here.  In summary – I strongly encourage everyone to investigate Dropbox to see if it’s something they would find useful.  If you use Dropbox and know of a great feature I failed to mention, please share it with me, I’d love to hear how everyone uses this program. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

  Read the article

• Recovering from apt-get upgrade gone wrong due to a full disk

  - by Peter

  I was performing an apt-get upgrade on an Ubuntu 12.04.5 LTS box that hadn't been updated in a little while and the upgrade failed due to 'No space left on device'. After a little while I worked out space meant inodes and I have freed some up but unfortunately things have been left something askew. I have tried manually installing the old versions of packages mentioned using dpkg -i but that doesn't help. I have tried apt-get upgrade and apt-get -f install to no avail. Results are below. Any ideas how to fix things up? FIXED: Installing the earlier versions again manually via dpkg -i and then apt-get -f install has done the trick. Not sure why this didn't work the first time. The packages in question are listed below but they will presumably vary. libssl1.0.0_1.0.1-4ubuntu5.14_i386.deb linux-headers-3.2.0-64-generic-pae_3.2.0-64.97_i386.deb linux-image-generic-pae_3.2.0.64.76_i386.deb linux-headers-3.2.0-64_3.2.0-64.97_all.deb linux-headers-generic-pae_3.2.0.64.76_i386.deb root@unlinked:/tmp# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. libssl-dev : Depends: libssl1.0.0 (= 1.0.1-4ubuntu5.14) but 1.0.1-4ubuntu5.17 is installed linux-generic-pae : Depends: linux-image-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed Depends: linux-headers-generic-pae (= 3.2.0.64.76) but 3.2.0.67.79 is installed E: Unmet dependencies. Try using -f. root@unlinked:/tmp# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: linux-headers-3.2.0-43-generic-pae linux-headers-3.2.0-38-generic-pae linux-headers-3.2.0-41-generic-pae linux-headers-3.2.0-36-generic-pae linux-headers-3.2.0-63-generic-pae linux-headers-3.2.0-58-generic-pae linux-headers-3.2.0-60-generic-pae linux-headers-3.2.0-55-generic-pae linux-headers-3.2.0-40 linux-headers-3.2.0-41 linux-headers-3.2.0-36 linux-headers-3.2.0-37 linux-headers-3.2.0-43 linux-headers-3.2.0-38 linux-headers-3.2.0-44 linux-headers-3.2.0-39 linux-headers-3.2.0-45 linux-headers-3.2.0-51 linux-headers-3.2.0-52 linux-headers-3.2.0-53 linux-headers-3.2.0-48 linux-headers-3.2.0-54 linux-headers-3.2.0-60 linux-headers-3.2.0-55 linux-headers-3.2.0-61 linux-headers-3.2.0-56 linux-headers-3.2.0-57 linux-headers-3.2.0-63 linux-headers-3.2.0-58 linux-headers-3.2.0-59 linux-headers-3.2.0-52-generic-pae linux-headers-3.2.0-44-generic-pae linux-headers-3.2.0-39-generic-pae linux-headers-3.2.0-37-generic-pae linux-headers-3.2.0-59-generic-pae linux-headers-3.2.0-61-generic-pae linux-headers-3.2.0-56-generic-pae linux-headers-3.2.0-53-generic-pae linux-headers-3.2.0-48-generic-pae linux-headers-3.2.0-45-generic-pae linux-headers-3.2.0-40-generic-pae linux-headers-3.2.0-57-generic-pae linux-headers-3.2.0-54-generic-pae linux-headers-3.2.0-51-generic-pae Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libssl-dev linux-generic-pae The following packages will be upgraded: libssl-dev linux-generic-pae 2 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade. 2 not fully installed or removed. Need to get 0 B/1,427 kB of archives. After this operation, 1,024 B of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of libssl-dev: libssl-dev depends on libssl1.0.0 (= 1.0.1-4ubuntu5.14); however: Version of libssl1.0.0 on system is 1.0.1-4ubuntu5.17. dpkg: error processing libssl-dev (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of linux-generic-pae: linux-generic-pae depends on linux-image-generic-pae (= 3.2.0.64.76); however: Version of linux-image-generic-pae on system is 3.2.0.67.79. linux-generic-pae depends on linux-headers-generic-pae (= 3.2.0.64.76); however: Version of linux-headers-generic-pae on system is 3.2.0.67.79. dpkg: error processing linux-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: libssl-dev linux-generic-pae E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Get your content off Blogger.com

  - by Daniel Moth

  Due to blogger.com deprecating FTP users I've decided to move my blog. When I think of the content of a blog, 4 items come to mind: blog posts, comments, binary files that the blog posts linked to (e.g. images, ZIP files) and the CSS+structure of the blog. 1. Binaries The binary files you used in your blog posts are sitting on your own web space, so really blogger.com is not involved with that. Nothing for you to do at this stage, I'll come back to these in another post. 2. CSS and structure In the best case this exists as a separate CSS file on your web space (so no action for now) or in a worst case, like me, your CSS is embedded with the HTML. In the latter case, simply navigate from you dashboard to "Template" then "Edit HTML" and copy paste the contents of the box. Save that locally in a txt file and we'll come back to that in another post. 3. Blog posts and Comments The blog posts and comments exist in all the HTML files on your own web space. Parsing HTML files to extract that can be painful, so it is easier to download the XML files from blogger's servers that contain all your blog posts and comments. 3.1 Single XML file, but incomplete The obvious thing to do is go into your dashboard "Settings" and under the "Basic" tab look at the top next to "Blog Tools". There is a link there to "Export blog" which downloads an XML file with both comments and posts. The problem with that is that it only contains 200 comments - if you have more than that, you will lose the surplus. Also, this XML file has a lot of noise, compared to the better solution described next. (note that a tool I will refer to in a future post deals with either kind of XML file) 3.2 Multiple XML files First you need to find your blog ID. In case you don't know what that is, navigate to the "Template" as described in section 2 above. You will find references to the blog id in the HTML there, but you can also see it as part of the URL in your browser: blogger.com/template-edit.g?blogID=YOUR_NUMERIC_ID. Mine is 7 digits. You can now navigate to these URLs to download the XML for your posts and comments respectively: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=1 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=1 Note that you can only get 500 posts at a time and only 200 comments at a time. To get more than that you have to change the URL and download the next batch. To get you started, to get the XML for the next 500 posts and next 200 comments respectively you’d have to use these URLs: blogger.com/feeds/YOUR_NUMERIC_ID/posts/default?max-results=500&start-index=501 blogger.com/feeds/YOUR_NUMERIC_ID/comments/default?max-results=200&start-index=201 ...and so on and so forth. Keep all the XML files in the same folder on your local machine (with nothing else in there). 4. Validating the XML aka editing older blog posts The XML files you just downloaded really contain HTML fragments inside for all your blog posts. If you are like me, your blog posts did not conform to XHTML so passing them to an XML parser (which is what we will want to do) will result in the XML parser choking. So the next step is to fix that. This can be no work at all for you, or a huge time sink or just a couple hours of pain (which was my case). The process I followed was to attempt to load the XML files using XmlDocument.Load and wait for the exception to be thrown from my code. The exception would point to the exact offending line and column which would help me fix the issue. Rather than fix it in the XML itself, I would go back and edit the offending blog post and fix it there - recommended! Then I'd repeat the cycle until the XML could be loaded in the XmlDocument. To give you an idea, some of the issues I encountered are: extra or missing quotes in img and href elements, direct usage of chevrons instead of encoding them as &lt;, missing closing tags, mismatched nested pairs of elements and capitalization of html elements. For a full list of things that may go wrong see this. 5. Opportunity for other changes I also found a few posts that did not have a category assigned so I fixed those too. I took the further opportunity to create new categories and tag some of my blog posts with that. Note that I did not remove/change categories of existing posts, but only added.   In an another post we'll see how to use the XML files you stored in the local folder… Comments about this post welcome at the original blog.

  Read the article

• How to Sync Any Folder With SkyDrive on Windows 8.1

  - by Chris Hoffman

  Before Windows 8.1, it was possible to sync any folder on your computer with SkyDrive using symbolic links. This method no longer works now that SkyDrive is baked into Windows 8.1, but there are other tricks you can use. Creating a symbolic link or directory junction inside your SkyDrive folder will give you an empty folder in your SkyDrive cloud storage. Confusingly, the files will appear inside the SkyDrive Modern app as if they were being synced, but they aren’t. The Solution With SkyDrive refusing to understand and accept symbolic links in its own folder, the best option is probably to use symbolic links anyway — but in reverse. For example, let’s say you have a program that automatically saves important data to a folder anywhere on your hard drive — whether it’s C:\Users\USER\Documents\, C:\Program\Data, or anywhere else. Rather than trying to trick SkyDrive into understanding a symbolic link, we could instead move the actual folder itself to SkyDrive and then use a symbolic link at the folder’s original location to trick the original program. This may not work for every single program out there. But it will likely work for most programs, which use standard Windows API calls to access folders and save files. We’re just flipping the old solution here — we can’t trick SkyDrive anymore, so let’s try to trick other programs instead. Moving a Folder and Creating a Symbolic Link First, ensure no program is using the external folder. For example, if it’s a program data or settings folder, close the program that’s using the folder. Next, simply move the folder to your SkyDrive folder. Right-click the external folder, select Cut, go to the SkyDrive folder, right-click and select Paste. The folder will now be located in the SkyDrive folder itself, so it will sync normally. Next, open a Command Prompt window as Administrator. Right-click the Start button on the taskbar or press Windows Key + X and select Command Prompt (Administrator) to open it. Run the following command to create a symbolic link at the original location of the folder: mklink /d “C:\Original\Folder\Location” “C:\Users\NAME\SkyDrive\FOLDERNAME\” Enter the correct paths for the exact location of the original folder and the current location of the folder in your SkyDrive. Windows will then create a symbolic link at the folder’s original location. Most programs should hopefully be tricked by this symbolic location, saving their files directly to SkyDrive. You can test this yourself. Put a file into the folder at its original location. It will be saved to SkyDrive and sync normally, appearing in your SkyDrive storage online. One downside here is that you won’t be able to save a file onto SkyDrive without it taking up space on the same hard drive SkyDrive is on. You won’t be able to scatter folders across multiple hard drives and sync them all. However, you could always change the location of the SkyDrive folder on Windows 8.1 and put it on a drive with a larger amount of free space. To do this, right-click the SkyDrive folder in File Explorer, select Properties, and use the options on the Location tab. You could even use Storage Spaces to combine the drives into one larger drive. Automatically Copy the Original Files to SkyDrive Another option would be to run a program that automatically copies files from another folder on your computer to your SkyDrive folder. For example, let’s say you want to sync copies of important log files that a program creates in a specific folder. You could use a program that allows you to schedule automatic folder-mirroring, configuring the program to regularly copy the contents of your log folder to your SkyDrive folder. This may be a useful alternative for some use cases, although it isn’t the same as standard syncing. You’ll end up with two copies of the files taking up space on your system, which won’t be ideal for large files. The files also won’t be instantly uploaded to your SkyDrive storage after they’re created, but only after the scheduled task runs. There are many options for this, including Microsoft’s own SyncToy, which continues to work on Windows 8. If you were using the symbolic link trick to automatically sync copies of PC game save files with SkyDrive, you could just install GameSave Manager. It can be configured to automatically create backup copies of your computer’s PC game save files on a schedule, saving them to SkyDrive where they’ll be synced and backed up online. SkyDrive support was completely rewritten for Windows 8.1, so it’s not surprising that this trick no longer works. The ability to use symbolic links in previous versions of SkyDrive was never officially supported, so it’s not surprising to see it break after a rewrite. None of the methods above are as convenient and quick as the old symbolic link method, but they’re the best we can do with the SkyDrive integration Microsoft has given us in Windows 8.1. It’s still possible to use symbolic links to easily sync other folders with competing cloud storage services like Dropbox and Google Drive, so you may want to consider switching away from SkyDrive if this feature is critical to you.     

  Read the article

• Migrating SQL Server Compact Edition (SQL CE) database to SQL Server using Web Matrix

  - by Harish Ranganathan

  One of the things that is keeping us busy is the Web Camps we are delivering across 5 cities.  If you are a reader of this blog, and also attended one of these web camps, there is a good chance that you have seen me since I was there in all the places, so far.  The topics that we cover include Visual Studio 2010 SP1, SQL CE, ASP.NET MVC & HTML5.  Whenever I talk about SQL CE, the immediate response is that, people are wow that Microsoft has shipped a FREE compact edition database, which is an embedded database that can be x-copy deployed.  If you think, well didn’t Microsoft ship SQL Express which is FREE?  The difference is that, SQL Express runs as a service in the machine (if you open SQL Configuration Manager, you can notice that SQL Express is running as a service along with your SQL Server Engine (if you have installed ).  This makes it that, even if you are willing to use SQL Express when you deploy your application, it needs to be installed on the production machine (hosting provider) and it needs to run as a service.  Many hosters don’t allow such services to run on their space. SQL CE comes as a x-Copy deploy-able database with just a few DLLs required to run it on the machine and they don’t even need to be installed in GAC on the production machine.  In fact, if you have Visual Studio 2010 SP1 installed, you can use the “Add Deployable Dependencies” option in Project-Properties and it would detect that SQL CE is something you would probably want to add as a deploy-able dependency for your project.  With that, it bundles the required DLLs as a part of the “_bin_deployableAssemblies” folder.  So your project can be x-Copy deployed and just works fine. However, SQL CE has the limit of 4GB storage space.  Real world applications often require more than just 4GB of data storage and it often turns out that people would like to use SQL CE for development/ramp up stages but would like to migrate to full fledged SQL Server after a while.  So, its only natural that the question arises “How do I move my SQL CE database to SQL Server”  And honestly, it doesn’t come across as a straight forward support.  I was talking to Ambrish Mishra (PM in SQL CE Team, Hyderabad) since I got this question in almost all the places where we talked about SQL CE.   He was kind enough to demonstrate how this can be accomplished using Web Matrix.  Open Web Matrix (Web Matrix can be installed for free from www.microsoft.com/web) and click on “Site from Template” Click on the “Bakery” template (since by default it uses a SQL CE database and has all the required sample data) and click “Ok”. In the project, you can navigate to the Database tab and will be able to find that the Bakery site uses a SQL CE database “bakery.sdf” Select the “bakery.sdf” and you will be able to see the “Migrate” button on the top right Once you click on the “Migrate” button, you will notice that the popup wizard opens up and by default is configured for SQL Express.  You can edit the same to point to your local SQL Server instance, or a remote server. Upon filling in the Server Name, Username and Password, when you click “Ok”, couple of things happen.  1. The database is migrated to SQL Server (local or remote – subject to permissions on remote server).   You can open up SQL Server Management Studio and connect to the server to verify that the “bakery” database exists under “Databases” node. 2. You can also notice that in Web Matrix, when you navigate to the “Files” tab and open up the web.config file, connection string now points to the SQL Server instance (yes, the Migrate button was smart enough to make this change too ) And there it is, your SQL Server Compact Edition database, now migrated to SQL Server!! In a future post, I would explain the steps involved when using Visual Studio. Cheers !!!

  Read the article

• Book review (Book 6) - Wikinomics

  - by BuckWoody

  This is a continuation of the books I challenged myself to read to help my career - one a month, for year. You can read my first book review here. The book I chose for November 2011 was: Wikinomics: How Mass Collaboration Changes Everything, by Don Tapscott   Why I chose this Book: I’ve heard a lot about this book - was one of the “must read” kind of business books (many of which are very “fluffy”) and supposedly deals with collaborating using technology - so I want to see what it says about collaborative efforts and how I can leverage them. What I learned: I really disliked this book. I’ve never been a fan of the latest “business book”, and sadly that’s what this felt like to me. A “business book” is what I call a work that has a fairly simple concept to get across, and then proceeds to use various made-up terms, analogies and other mechanisms to fill hundreds of pages doing it. This perception is at my own – the book is pretty old, and these things go stale quickly. The author’s general point (at least what I took away from it) was: Open Source is good, proprietary is bad. Collaboration is the hallmark of successful companies. In my mind, you can save yourself the trouble of reading this work if you get these two concepts down. Don’t get me wrong – open source is awesome, and collaboration is a good thing, especially in places where it fits. But it’s not a panacea as the author seems to indicate. For instance, he continuously uses the example of MySpace to show a “2.0” company, which I think means that you can enter text as well as read it on a web page. All well and good. But we all know what happened to MySpace, and of course he missed the point entirely about this new web environment: low barriers to entry often mean low barriers to exit. And the open, collaborative company being the best model – well, I think we all know a certain computer company famous for phones and music that is arguably quite successful, and is probably one of the most closed, non-collaborative (at least with its customers) on the planet. So that sort of takes away that argument. The reality of business is far more complicated. Collaboration is an amazing tool, and should be leveraged heavily. However, at the end of the day, after you do your research you need to pick a strategy and stick with it. Asking thousands of people to assist you in building your product probably will not work well. Open Source is great – but some proprietary products are quite functional as well, have a long track record, are well supported, and will probably be upgraded. Everything has its place, so use what works where it is needed. There is no single answer, sadly. So did I waste my time reading the book? Did I make a bad choice? Not at all! Reading the opinions and thoughts of others is almost always useful, and it’s important to consider opinions other than your own. If nothing else, thinking through the process either convinces you that you are wrong, or helps you understand better why you are right.

  Read the article

• [Windows 8] Application bar popup button

  - by Benjamin Roux

  Here is a small control to create an application bar button which will display a content in a popup when the button is clicked. Visually it gives this So how to create this? First you have to use the AppBarPopupButton control below.   namespace Indeed.Controls { public class AppBarPopupButton : Button { public FrameworkElement PopupContent { get { return (FrameworkElement)GetValue(PopupContentProperty); } set { SetValue(PopupContentProperty, value); } } public static readonly DependencyProperty PopupContentProperty = DependencyProperty.Register("PopupContent", typeof(FrameworkElement), typeof(AppBarPopupButton), new PropertyMetadata(null, (o, e) => (o as AppBarPopupButton).CreatePopup())); private Popup popup; private SerialDisposable sizeChanged = new SerialDisposable(); protected override void OnTapped(Windows.UI.Xaml.Input.TappedRoutedEventArgs e) { base.OnTapped(e); if (popup != null) { var transform = this.TransformToVisual(Window.Current.Content); var offset = transform.TransformPoint(default(Point)); sizeChanged.Disposable = PopupContent.ObserveSizeChanged().Do(_ => popup.VerticalOffset = offset.Y - (PopupContent.ActualHeight + 20)).Subscribe(); popup.HorizontalOffset = offset.X + 24; popup.DataContext = this.DataContext; popup.IsOpen = true; } } private void CreatePopup() { popup = new Popup { IsLightDismissEnabled = true }; popup.Closed += (o, e) => this.GetParentOfType<AppBar>().IsOpen = false; popup.ChildTransitions = new Windows.UI.Xaml.Media.Animation.TransitionCollection(); popup.ChildTransitions.Add(new Windows.UI.Xaml.Media.Animation.PopupThemeTransition()); var container = new Grid(); container.Children.Add(PopupContent); popup.Child = container; } } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The ObserveSizeChanged method is just an extension method which observe the SizeChanged event (using Reactive Extensions - Rx-Metro package in Nuget). If you’re not familiar with Rx, you can replace this line (and the SerialDisposable stuff) by a simple subscription to the SizeChanged event (using +=) but don’t forget to unsubscribe to it ! public static IObservable<Unit> ObserveSizeChanged(this FrameworkElement element) { return Observable.FromEventPattern<SizeChangedEventHandler, SizeChangedEventArgs>( o => element.SizeChanged += o, o => element.SizeChanged -= o) .Select(_ => Unit.Default); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The GetParentOfType extension method just retrieve the first parent of type (it’s a common extension method that every Windows 8 developer should have created !). You can of course tweak to control (for example if you want to center the content to the button or anything else) to fit your needs. How to use this control? It’s very simple, in an AppBar control just add it and define the PopupContent property. <ic:AppBarPopupButton Style="{StaticResource RefreshAppBarButtonStyle}" HorizontalAlignment="Left"> <ic:AppBarPopupButton.PopupContent> <Grid> [...] </Grid> </ic:AppBarPopupButton.PopupContent> </ic:AppBarPopupButton> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When the button is clicked the popup is displayed. When the popup is closed, the app bar is closed too. I hope this will help you !

  Read the article

• Doing unit and integration tests with the Web API HttpClient

  - by cibrax

  One of the nice things about the new HttpClient in System.Net.Http is the support for mocking responses or handling requests in a http server hosted in-memory. While the first option is useful for scenarios in which we want to test our client code in isolation (unit tests for example), the second one enables more complete integration testing scenarios that could include some more components in the stack such as model binders or message handlers for example.   The HttpClient can receive a HttpMessageHandler as argument in one of its constructors. public class HttpClient : HttpMessageInvoker { public HttpClient(); public HttpClient(HttpMessageHandler handler); public HttpClient(HttpMessageHandler handler, bool disposeHandler); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } For the first scenario, you can create a new HttpMessageHandler that fakes the response, which you can use in your unit test. The only requirement is that you somehow inject an HttpClient with this custom handler in the client code. public class FakeHttpMessageHandler : HttpMessageHandler { HttpResponseMessage response; public FakeHttpMessageHandler(HttpResponseMessage response) { this.response = response; } protected override Task<HttpResponseMessage> SendAsync(HttpRequestMessage request, System.Threading.CancellationToken cancellationToken) { var tcs = new TaskCompletionSource<HttpResponseMessage>(); tcs.SetResult(response); return tcs.Task; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } In an unit test, you can do something like this. var fakeResponse = new HttpResponse(); var fakeHandler = new FakeHttpMessageHandler(fakeResponse); var httpClient = new HttpClient(fakeHandler); var customerService = new CustomerService(httpClient); // Do something // Asserts .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } CustomerService in this case is the class under test, and the one that receives an HttpClient initialized with our fake handler. For the second scenario in integration tests, there is a In-Memory host “System.Web.Http.HttpServer” that also derives from HttpMessageHandler and you can use with a HttpClient instance in your test. This has been discussed already in these two great posts from Pedro and Filip. 

  Read the article

• SSH-forwarded X11 display from Linux to Mac lost after some time

  - by mklein9

  I have a new and vexing problem with ssh forwarding my X11 connection when logging in from a Mac (10.7.2) to Linux (Ubuntu 8.04). I have no trouble using ssh -X to log in to the remote machine and starting an X11-based application from that shell. What has recently started happening is that additional invocations of X11 applications from that same shell, after a while (on the order of hours), are unable to start because the forwarded display is being blocked (I presume). When attempting to start xterm, for example, I get the usual message about a bad DISPLAY setting, such as: xterm Xt error: Can't open display: localhost:10.0 But the X11 application I started right when I logged in is still running along just fine, using that exact same display (localhost:10.0), just that it was started earlier. I turned on verbose logging in sshd_config and I see this in the /var/log/auth.log file in response to the failed xterm startup attempt: sshd[22104]: channel 8: open failed: administratively prohibited: open failed If I ssh -X to the server again, starting a new shell and getting assigned a new display (localhost:11.0), the same process repeats: the X11 applications started early on run just fine for as long as I keep them open (days), but after a few hours I cannot start any new ones from that shell. Particulars: OpenSSH sshd server running on Ubuntu 8.04, display forwarded to a Mac running Lion (10.7.2) with the default Apple X server. The systems are connected on an Ethernet LAN with a single switch between them. Neither machine is running a firewall. Until recently (a few days ago) this setup worked perfectly so I am mystified as to where to look next. I am by no means an X11 or SSH expert but have good UNIX/Linux experience. Nothing obvious has changed in either client or server configuration although I have tried changing a few options to try to debug this, like setting sshd_config's TCPKeepAlive to no, and setting "host +localhost" (you can tell I've been Googling). When logging in from a Linux 11.10 laptop to the same remote host over the same network and switch, this problem does not occur -- an xterm can be invoked successfully hours later from the same ssh login shell while the same experiment from the Mac fails (tested this morning to be sure), so it would appear to be a Mac-specific issue. With "LogLevel DEBUG3" set on the remote machine (sshd server), and no change made in the client connections by me, /var/log/auth.log shows one slight change in connection status reports overnight, which is the port number used by the one successful ssh session from the Linux machine (I think), connection #7 below: sshd[20173]: debug3: channel 7: status: The following connections are open:\r\n #0 server-session (t4 r0 i0/0 o0/0 fd 14/13 cfd -1)\r\n #3 X11 connection from 127.0.0.1 port 57564 (t4 r1 i0/0 o0/0 fd 16/16 cfd -1)\r\n #4 X11 connection from 127.0.0.1 port 57565 (t4 r2 i0/0 o0/0 fd 17/17 cfd -1)\r\n #5 X11 connection from 127.0.0.1 port 57566 (t4 r3 i0/0 o0/0 fd 18/18 cfd -1)\r\n #6 X11 connection from 127.0.0.1 port 57567 (t4 r4 i0/0 o0/0 fd 19/19 cfd -1)\r\n #7 X11 connection from 127.0.0.1 port 59007 In this report, everything is the same between status reports except the port number used by connection #7 which I believe is the Linux client -- the only one still maintaining a display connection. It continues to increment over time, judging by a sequence of these reports overnight. Thanks for any help, -Mike

  Read the article

• Stay on Schedule in Chrome with DayHiker

  - by Matthew Guay

  Do you keep your schedule and tasks in Google Calendar?  Here’s a handy extension for Google Chrome that can keep you on top of your appointments without having to open Google Calendar in another tab. Integrate Google Calendar with Chrome DayHiker is a handy extension for Google Chrome that can help you stay on schedule in your browser.  Desktop applications typically can keep you notified easier with popups or alerts, but webapps require you to visit them to view your information.  DayHiker takes the best of both, and can make your Google Calendar work more like a desktop application. To get started, open the DayHiker page from the Chrome Extensions Gallery (link below), and click Install.  Confirm you wish to install it at the prompt. Now you’ll have a new extension button in your Chrome toolbar.  Click the calendar icon to view your Google Calendar.  You’ll need to be signed into your Google account for your calendar to display; click the key icon to select your account if it doesn’t show your appointments automatically. If you’re signed into multiple Google accounts, such as your public Gmail and a Google Apps account, you can select the calendar you wish and click Continue. Now you can quickly see your upcoming appointments.  Simply hover over the icon to see your upcoming events.  Or, just glance at it to see if there are any appointments coming up, as the indicator icon will change colors to show how long you have until your next appointment. Click the icon to see more information about your appointments. Or, click the Add link to add a new appointment.  If you need to edit the appointment details, click Edit Details and the appointment will open in Google Calendar for you to edit. You can also view and manage your tasks in Google Calendar.  Click the checkmark icon, and then add or check-off tasks directly from the extension pane. You can also set an alarm clock in DayHiker.  Click the green circle icon, and then enter the time for the alarm to go off.  Strangely it will only chime if the extension pane is left open, so if you click anywhere else in the browser or even switch to another program it will not chime.   If you’d like to customize DayHiker’s settings, right-click on it and select Options, or select Options in the Chrome Extensions page.  Here you can customize your badges and the DayHiker icon, or enter a custom domain for your Google Apps Pro calendar.   Conclusion If you rely on Google Calendar to stay on top of your schedule, DayHiker can help you stay scheduled and know what’s coming up.  We wish DayHiker supported multiple calendars so we could combine our Google Apps calendars with our personal Google Calendar, but even still, it is a very useful tool.  Whether you’re a tightly scheduled person or just like to jot down to-dos and keep track of them, this extension will help you do this efficiently with familiar Google tools. Link Download DayHiker from the Chrome Extensions Gallery Similar Articles Productive Geek Tips Configure Disk Defragmenter Schedule in Windows 7 or VistaSchedule Updates for Windows Media CenterOpen Multiple Sites Without Reopening the Menus in FirefoxFind a Website’s Actual Location with Chrome FlagsSubscribe to RSS Feeds in Chrome with a Single Click TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Dual Boot Ubuntu and Windows 7 What is HTML5? Default Programs Editor – One great tool for Setting Defaults Convert BMP, TIFF, PCX to Vector files with RasterVect Free Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good

  Read the article

• Populate a WCF syndication podcast using MP3 ID3 metadata tags

  - by brian_ritchie

  In the last post, I showed how to create a podcast using WCF syndication.  A podcast is an RSS feed containing a list of audio files to which users can subscribe.  The podcast not only contains links to the audio files, but also metadata about each episode.  A cool approach to building the feed is reading this metadata from the ID3 tags on the MP3 files used for the podcast. One library to do this is TagLib-Sharp.  Here is some sample code: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: var taggedFile = TagLib.File.Create(f); 2: var fileInfo = new FileInfo(f); 3: var item = new iTunesPodcastItem() 4: { 5: title = taggedFile.Tag.Title, 6: size = fileInfo.Length, 7: url = feed.baseUrl + fileInfo.Name, 8: duration = taggedFile.Properties.Duration, 9: mediaType = feed.mediaType, 10: summary = taggedFile.Tag.Comment, 11: subTitle = taggedFile.Tag.FirstAlbumArtist, 12: id = fileInfo.Name 13: }; 14: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 15: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); This reads the ID3 tags into an object for later use in creating the syndication feed.  When the MP3 is created, these tags are set...or they can be set after the fact using the Properties dialog in Windows Explorer.  The only "hack" is that there isn't an easily accessible tag for "subtitle" or "published date" so I used other tags in this example. Feel free to change this to meet your purposes.  You could remove the subtitle & use the file modified data for example. That takes care of the episodes, for the feed level settings we'll load those from an XML file: .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: <?xml version="1.0" encoding="utf-8" ?> 2: <iTunesPodcastFeed 3: baseUrl ="" 4: title="" 5: subTitle="" 6: description="" 7: copyright="" 8: category="" 9: ownerName="" 10: ownerEmail="" 11: mediaType="audio/mp3" 12: mediaFiles="*.mp3" 13: imageUrl="" 14: link="" 15: /> Here is the full code put together. Read the feed XML file and deserialize it into an iTunesPodcastFeed classLoop over the files in a directory reading the ID3 tags from the audio files .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: public static iTunesPodcastFeed CreateFeedFromFiles(string podcastDirectory, string podcastFeedFile) 2: { 3: XmlSerializer serializer = new XmlSerializer(typeof(iTunesPodcastFeed)); 4: iTunesPodcastFeed feed; 5: using (var fs = File.OpenRead(Path.Combine(podcastDirectory, podcastFeedFile))) 6: { 7: feed = (iTunesPodcastFeed)serializer.Deserialize(fs); 8: } 9: foreach (var f in Directory.GetFiles(podcastDirectory, feed.mediaFiles)) 10: { 11: try 12: { 13: var taggedFile = TagLib.File.Create(f); 14: var fileInfo = new FileInfo(f); 15: var item = new iTunesPodcastItem() 16: { 17: title = taggedFile.Tag.Title, 18: size = fileInfo.Length, 19: url = feed.baseUrl + fileInfo.Name, 20: duration = taggedFile.Properties.Duration, 21: mediaType = feed.mediaType, 22: summary = taggedFile.Tag.Comment, 23: subTitle = taggedFile.Tag.FirstAlbumArtist, 24: id = fileInfo.Name 25: }; 26: if (!string.IsNullOrEmpty(taggedFile.Tag.Album)) 27: item.publishedDate = DateTimeOffset.Parse(taggedFile.Tag.Album); 28: feed.Items.Add(item); 29: } 30: catch 31: { 32: // ignore files that can't be accessed successfully 33: } 34: } 35: return feed; 36: } Usually putting a "try...catch" like this is bad, but in this case I'm just skipping over files that are locked while they are being uploaded to the web site.Here is the code from the last couple of posts.  

  Read the article

• SQL SERVER – What are Actions in SSAS and How to Make a Reporting Action

  - by Pinal Dave

  Actions are used for customized browsing and drilling of data for the end-user. It’s an event that a user can raise while accessing the cube data. They are used in cube browsers like excel and are triggered when a user in a client tool clicks on a particular member, level, dimension, cells or may be the cube itself.  For example a user might be able to see a reporting services report, open a web page or drill through to detailed information related to the cube data. Analysis server supports 3 types of actions :- Report Drill-through Standard Actions In this blog post, I will explain the Reporting  action. The objective of this action is to return a report with details of the product where the sales amount is greater than 1000 in cube browser analysis. You need to create a basic cube first with the facts and dimensions you want in the analysis. Following are the steps to create reporting action. Go to SQL server data tools and open the analysis services project. Navigate to actions and click on new reporting action. 2.) Specify the name of the action and choose target type as attribute members since we have to create the action on members for a attribute. 3.) Specify the Target object of your report action. Target object would be the dimension or attribute on which you want the report to appear. In our case it is product name. 4.) Next you have to define the condition on which you want the report link to appear. However, this is an optional feature. In this example we are specifying a condition, which will check if the sales amount is greater than 10,000. So, that the link appears only for those products where the defined condition is met. 5.) Next you have to specify the server name on which the report is present, report path  and the report format in which you want the report to appear. 6.) Additionally you can specify the parameters. As with conditional expression, the parameters should be a valid MDX expression. The parameter name should be same as the one defined in the report. 7.) Deploy your solution after you are done with specifying parameters and go to the cube browser. 8.) Click on the analyze in excel button, this will open your cube in excel 9.) Make an analysis which shows product names and their sales amount. 10.) Right click on a product where sales amount is greater than 10000 you will see the reporting action link. Click on that and you will be taken to your reporting services report. 11.) Clicking on the link will take you to the URL of the report. I created this report using report project wizard in SQL server data tools. So, this is how we can launch reports from a cube browser. Similarly you can open web pages, run applications and a number of  other tasks. Koenig Solutions offers SSAS training which contains all Analysis Services including Reporting in great detail. In my next blog post I will talk about drill-through actions. Author: Namita Sharma, Senior Corporate Trainer at Koenig Solutions. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SSAS

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >