Search Results

Search found 12497 results on 500 pages for 'linked servers'.

Page 320/500 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Web Server Users - Best Practice

  - by Toby

  I was wondering what is considered best practice when several developers/administrators require access to the same web server. Should there be one non-root user with a secure username and password unqiue to the web server which everyone logs in as or should there be a username for each person. I am leaning towards a username for each person to aid in logging etc however then does the same user keep the same credentials over several servers, or should at least their password change depending on the server they are on? Should any non-root user of the system be added to the sudoers file or is it best practice to leave everyone off it and only let root perform certain tasks? Any help would be greatly appreciated.

  Read the article

• Web Server Users - Best Practice

  - by Toby

  I was wondering what is considered best practice when several developers/administrators require access to the same web server. Should there be one non-root user with a secure username and password unqiue to the web server which everyone logs in as or should there be a username for each person. I am leaning towards a username for each person to aid in logging etc however then does the same user keep the same credentials over several servers, or should at least their password change depending on the server they are on? Should any non-root user of the system be added to the sudoers file or is it best practice to leave everyone off it and only let root perform certain tasks? Any help would be greatly appreciated.

  Read the article

• No Internet for Created VLan on Cisco CE500

  - by Jennifer

  I'm new here and also with networking but i can't set internet conection for some vlan created. I have a Cisco CE500 switch and created 4 vlans define by the roles in the switch. Vlan 2: Servers (role) (port 3-4) Vlan 3: Desktop (role) (port 5-8) Vlan 4: Guest (role) (port 9-12) Vlan 1 is default, Connect to the ADSL Modem/Router Port 2 assign to the Router Role (vlan 1) The switch is connected on port2 the ADSL Modem (DHCP) 192.168.2.254 The goal is: All Vlan should have internet connection. Vlan 2 and 3 should see each other but not Vlan 4 I can enter the switch CLI but dont know which command to enter. Thanks 4 ur time and replies Jennifer

  Read the article

• Firewall Deep Inspection Updates and Antivirus Subscription, worth it?

  - by msemack

  I realize that this is a subjective question, but I'm trying to get some experiences We have Juniper firewalls in our organization (SSG-320M, SSG-5, and some old NS-5GT). We have the option of a yearly subscription for: Deep Inspection Signature Updates Juniper-Kaspersky Antivirus I seem similar services available from other Firewall vendors. We have Symantec Endpoint Protection deployed to all workstations and servers, plus a dedicated appliance for e-mail spam/virus filtering. So, I'm not sure what these firewall-base services will bring to the table that I don't already have. I would appreciate some feedback from people using these firewall services (Juniper or otherwise). Are these services generally worth it? Do they really catch anything? Do they interfere with normal traffic (false positives)?

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• low speed web application, Server problem or Application

  - by Ashian

  Hi, I have a web application written by asp.net (c#) sql server 2005. we host it on 2 dedicated server ( IIS and SQL server ) From some month ago , in some days of week we have many reports about speed issue. we have some other application on this server using same database. when we have speed problem all aplication on these server have this problem, but applications on other server in same data center work correctly. ram and cpu usage are ok. how can I check that the problem related to internet connection or my application design? which parameters must be checked. Some other information In applications users can upload several files to server , each file up to 3 MB. we use a sql web admin application, on same server that has same problem, this is a standard application which work perfectly on other servers. Thanks

  Read the article

• Yum through http proxy

  - by eodchop

  Hello, I have several Fedora 13 servers that have to connect through an http proxy for yum updates. All port 80 traffic has to be routed through this proxy. I have setup the proxy server in the network settings GUI. I can browse the internet just fine. I have also setup my proxy information in /etc/yum.conf as follows: proxy=http:proxy.largecorp.corp/accelerated_pac_base.pac proxy_user=user proxy_password=password I then added the export HTTP_PROXY="http:proxy.largecorp.corp/accelerated_pac_base.pac" to /etc/bashrc and sourced the file. When i run yum update: Loaded plugins:presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) fro repository: fedora. Please verify its path and try again. All of the repo urls are the defaults, as this is a fresh install.

  Read the article

• Forward requests to IIS Application/Folder to Apache server on another port

  - by TheGwa

  I have found many questions and answers for ways of doing this using asapi filters or ARR and URL Rewrite, but none are clear and concise and I am sure many people have this issue. I am looking for a best practice step by step solution to the following scenario: I have a development server accessible externally via a specific port for testing. Eg. rnd.domain.com:8888. So there is one port in and out of this machine accessible to the world. On this server I have a number of Apache or other servers using specific ports such as 8080. IIS is bound to port 80 locally as well as 8888 to get external requests and works perfectly. I would like to use an application (folder) in IIS such as rnd.domain.com:8888/mapserver to map to the local apache server in both directions. The same solution must apply in production where the domain is mapped to port 80. eg. production.domain.com/mapserver maps to 8080 on production server

  Read the article

• Reverse DNS for two ADs in the same subnet

  - by SpacemanSpiff

  I currently have two separate AD forests that exist within the same subnet. The two forests have independent copies of the reverse lookup zone for that subnet. Example: Domain A DC1: 10.1.1.1/24 Domain A DC2: 10.1.1.2/24 Domain A AppServer1:10.1.1.3/24 Domain B DC1: 10.1.1.11/24 Domain B DC2: 10.1.1.12/24 Domain B Appserver1:10.1.1.13/24 What I'm after, is a configuration that allows this reverse zone to be shared between them so that both sets of DNS servers can make updates to the zone. This kind of thing is a little far from my everday work, so a kick in the right direction is a welcome suggestion as well. Decoupling one AD into new segments is a possibility I'm open to but would like to avoid if possible. If there is a DNS related solution I'd prefer that.

  Read the article

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• setup PXE (i.e. DHCP + TFTP) server on MacOSX

  - by Albert

  What is the easiest way to setup an PXE server (i.e. a DHCP server + TFTP server) on MacOSX? Is there maybe some easy-to-use tool which just comes with both servers builtin? I have done that in the past but I remember that it took me several hours of editing some config files of tftpd (I think) and different versions of dhcpd, many trials and errors until I got it working (mostly). Now I have a fresh MacOSX installation and I want to avoid any complicated setup.

  Read the article

• DNS lookup working but nothing pinging

  - by blsub6

  I have three forward lookup zones in my DNS server. When I try pinging a server that's part of lookup zone A from a computer that's part of that same zone, I get a response. If I try pinging a server that's not in the same zone as the computer I'm pinging from, I get nothing. When I try an nslookup of the servers that are not part of the same lookup zone, the names resolve correctly. If I append the domain onto the name, I can ping it just fine. Is there a way I can fix this? or do I need to keep appending the domain onto the name if the computer I'm trying to ping is not of the same domain as me?

  Read the article

• Remote access to BIOS?

  - by j-g-faustus

  I have a home server running headless (i.e. without a monitor), using ssh for remote access. This works fine most of the time, but I still need a graphics card and still need to drag out a monitor whenever I have to access BIOS, (re-)install the OS and similar. I know that there are business servers that let you control everything remotely (over Ethernet), including power up and BIOS access. Is this type of functionality available for "prosumer" class hardware? If so, where does it sit - should I look for motherboard support, a PCI-e card or an external device? And does this type of functionality have a name, so I know what to google for?

  Read the article

• What RAID level for a backup server?

  - by ispirto

  I'm building a server with 12 x 3TB disks to use daily backups. I'm thinking to use RAID50 to get a good 27TB usable space. The disks will be used brutally to backup 9 servers with 1.5TB of data once a day. I'll keep the backups for 2 days. So for each server I'll have 3TB of separate partitions. Do you think this kind of huge backups would stress the disks too much and make them fail? Should I better go with RAID10? Oktay

  Read the article

• Fastest web server for serving static content

  - by Swader

  Hello, I'm optimizing our system for some faster static content delivery, and was wondering if anyone has any proper experience with the fastest web servers out there for such a purpose. From the three main candidates I've considered, Nginx, Cherokee and Lighttpd, each seems to have its own problems - but the reports I've read online are somewhat biased and lean towards whichever server the user is currently using. Any ideas on where to see a proper benchmark for this specific purpose, or at least a non-biased list of pros and cons? Any personal experiences and pitfalls I should be vary of? Thanks Edit: Serverfault.com gave the answer as nginx. I'd still like to hear some developer thoughts from this end of the universe.

  Read the article

• Increasing load capacity for growing website

  - by markxi

  My website currently runs on a dedicated web server (with LiteSpeed) and dedicated MySQL database server. It's a download based site with a lot of user-generated content, which can be streamed and downloaded, there are also thousands of thumbnails and static content. I'm at the stage where the web server can no longer handle the amount of traffic, so I'm looking a how best to increase capacity considering the large amount of downloadable content. My host suggests mirroring everything on a second web server and distributing the load between them using either DNS Made Easy, or to have my own load balancer (using ldirector) in front of the two web servers. Could anyone advise whether the above method would be the best option? Does any one have any experience with DNS Made Easy and/or ldirector? I'd appreciate any help.

  Read the article

• Securing a persistent reverse SSH connection for management

  - by bVector

  I am deploying demo Ubuntu 10.04 LTS servers in environments I do not control and would like to have an easy and secure way to administer these machines without having to have the destination firewall forward port 22 for SSH access. I've found a few guides to do this with reverse port (e.g. howtoforge reverse ssh tunneling guide) but I'm concerned with security of the stored ssh credentials required for the tunnel to be opened automatically. If the machine is compromised (primary concern is physical access to the machine is out of my control) how can I stop someone from using the stored credentials to poke around in the reverse ssh tunnel target machine? Is it possible to secure this setup, or would you suggest an alternate method?

  Read the article

• Security of a free public VPN service

  - by Mark Belli

  I just started using VPNBOOK, which is a (very efficent) free VPN solution. I have a question: VPNBOOK user and pass used to connect to their vpn network are publicily available on their homepage; everybody uses them to connect to the vpn. Can a user intercept my wifi traffic and: Understand that my connections are directed to VPNBOOK servers. If point 1 is successful, then they could use VPNBOOK public user and pass to decrypt my traffic? I hope I am missing something, otherwise it would be a very big weakness and I would revert to a paid service (with a private account)

  Read the article

• How to get cluster information remotely via Powershell?

  - by pdanke

  I've been trying to find a good way to gather various pieces of a windows cluster setup remotely, preferably via WMI, as we are not yet at a point where Powershell remoting is implemented (and I know this problem goes away with that). I know I can use the following to get the current node: Get-WmiObject Win32_ComputerSystem -ComputerName RemoteServer1 | Select Name I also need the name property of Get-Cluster, which I can't figure out how to get from a remote system. Is there something out there, or should I wait it out until Remoting gets implemented? I'm a newbie to all things clustering, just a dba looking to inventory our servers properly. Thanks for any help!

  Read the article

• Disable .net completely in a IIS6 Application Pool

  - by David L.-Pratte

  we're managing some web sites for our clients on our servers, some running Windows Server 2003 R2 and others running 2008 R2. In Windows Server 2008 R2, we can disable completely .NET framework usage for some application pools, which is great since most of our websites are still using classic ASP. After some issues with classic ASP applications being configured to run as ASP.NET 4 in a CLR 2.0 pool, we wanted to do the same thing in IIS6 - that is, have application pools without any .NET support. Is this a supported scenario in IIS6? Thanks

  Read the article

• How can I uninstall a clustered SQL instance if the cluster has been destroyed?

  - by Bob

  First time going through this scenario, and apparently I did it very wrong. On the DB servers I deleted the cluster group that held SQL and Reporting Services. I then destroyed the cluster. Then I tried to uninstall SQL. No dice. SQL still thinks its part of the non-existant cluster and will not let me uninstall it. I went into the Maintenance menu of the SQL setup and tried to Remove Node...nope. Unless I find a way out of this I will have to rebuild the OS if I can't get SQL off the box.

  Read the article

• Amazon EC2- many micro-instances vs single small/medium instance

  - by shashankaholic

  I have a chat application using stack of Openfire, Tomcat6 and MySQL. Currently, i have installed all these servers on single Linux micro-instance(613 MB memory). Even in low user base 10-20 i am encountering CPU overload which is quite obvious here. As, i am new to Amazon EC2 can somebody suggest me how to scale up my architecture according to traffic use? should i use separate micro instances for every app server(openfire,mysql,tomcat6) should i use single small or medium instance for whole server stack. Some factors in context: high reliance on MYSQL high memory usage due to file transfer web-application interacting with other Amazon service like S3,SES

  Read the article

• DDoS attacks to PBX

  - by user316687

  I'm wondering if DDOS attacks to PBX or telecommunications systems is possibe real. According to this links: http://threatpost.com/en_us/blogs/firm-sees-more-ddos-attacks-aimed-telecom-systems-073112 http://news.softpedia.com/news/DDOS-Attacks-Against-Telecom-Systems-Cost-as-Little-as-20-16-Per-Day-284875.shtml it is possible. There are DDOs attacks to web servers, which mostly give them so much concurrent loads or connections that service get unavailable. Many government or non-profit organizations that suffered this kind of attacks, eventually could choose to shutdown their web server and that's it, waiting for these attacks to end. For a DDOs attacks to PBX, I imagine that it would result in telephones getting busy or ringing all the time unstoppably. This kind of attack could really damage any kind organization. Is it possible to do that or are we just in the beginnings?

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >