Search Results

Search found 12497 results on 500 pages for 'linked servers'.

Page 319/500 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• DNS is resolving fine but can't access the server (unless changing /etc/hosts)

  - by victor hugo

  Hi all, I have a VPS server with a public IP, I added some A entries in my name server like svn.example.com - 1.1.1.1 Also I added some entries in my workstation /etc/hosts file in order to work with the domains meanwhile the DNSs were refreshed. It's been around 3 days from this and I configures everything in my server (using the hosts file), the DNSs are ready and I removed the entries but for my surprise I can access the servers nor anything in my domain or sub-domains (even a ping doesn't work). I've triple checked and the DNSs are OK. I don't know too much about DNSs . Any help would be appreciated. The IP address of my VPS is 74.63.223.43 I have these domain names, all pointing to the same IP (using A entries) hartoingenio.com www.hartoingenio.com svn.hartoingenio.com

  Read the article

• SSL Certificates, two-way authentication and loadbalancers

  - by 5arx

  We're looking to implement two-way authentication with client certificates for a privileged subset of our application users. The idea will be that if a certificate is detected the user will be asked for an additional password/PIN and that will be used to verify the certificate and user. Ordinary users will continue to authenticate themselves via the standard login mechanism. Our production environment (hosted by a well-known company) comprises load-balanced application servers and I'm unclear as to how this set-up will handle the certificates and I'm not certain if there are any pitfalls I should be aware of. I would very appreciate some thoughts, comments or real-world advice on the subject.

  Read the article

• How to tell httpd to preserve the proxied error message?

  - by ZNK - M

  I have an httpd server proxying the requests to 2 different tomcat servers. One of my server handles the authentication and returns a specific http error code 521 when the user already have a running session. My issue is httpd automatically maps this 521 error code to a 500 (internal server error) and then my client can not handle it properly. I have tried to disable ProxyErrorOverride, to remove the /error/HTTP_INTERNAL_SERVER_ERROR.html.var but it does not changes anything. How can I ask httpd to not change anything to the proxied message? <IfModule proxy_module> ProxyPass /context1 http://127.0.0.1:8001/context1 ProxyPass /context2 http://127.0.0.1:8002/context2 ProxyPreserveHost Off ProxyErrorOverride Off </IfModule> Thanks in advance httpd 2.2.22 (Win32) mod_ssl tomcat 7.25 windows 7 64-bits

  Read the article

• Best Solution For My Requirements

  - by Eray

  Hello, I'm a web developer. I have a few small online web application and a few Wordpress blogs. But i don't have too much experience with installing / configuring web servers . One of my web application needs cron jobs. It will check a lot of web sites availability. And, this application will leech too much RAM. And i think shared-hosting isn't suitable for this. But 1GB storage is enough i think. I don't need too much storage for my web sites. What do you think ? Which hosting solution is more suitable for my requirements ? Reseller ? VPS ? Cloud Server ? etc ...

  Read the article

• DNS Replication issue

  - by BillN

  We host the DNS for our domain. Two weeks ago, the developer requested that we setup a new zone 'dev.ourdomain.com' and place two host records in it my.dev.ourdomain.com and admin.dev.ourdomain.com. We added the zone to our DNS and added A records for the host. Now a week later, some DNS servers like google (8.8.8.8) and gtei (4.2.2.2) will resolve the hosts, but others like OpenDNS (208.67.222.222 ) and ATT Uverse (68.94.156.1) cannot resolve it. Any Ideas?

  Read the article

• KVM to Xen migration

  - by qweet

  I've recently been appointed to create some VMs for production use, and went gung ho into making a KVM based VM instead of finding out what our production server uses. I've only recently found out though that our own servers use Xensource OS, and don't look like they're going to be upgraded in the near future. So for the moment, I'm stuck with either two choices- attempting to convert the KVM VM into a Xen VM, or rebuilding what I have into a new Xen VM. Being the lazy person I am, I would rather not have to rebuild the VM. I've looked for some documentation on a procedure to do this, but the only thing I can come up with is an ancient article with some vague instructions. So this is my question, Server Fault- can one migrate a KVM running on a KVM kernel to a Xen kernel? And if so, how?

  Read the article

• SQL Server plus small files

  - by user1467163

  I have a MSSQL server, 3 volumes, that runs some processes that seem to take way too long. One of these processes reads in a zip file, then writes to a database based on what's in the zip file.... for each record. I have 2 volumes in use and am creating the third- so I am trying to plan how to do this. OS has to remain on vol. 1. The TLogs should probably go on the new volume and the mdf's on the existing vol.2.. Do I put the file store on the volume with the MDF's so they don't interfere with the TLog writes, or with the TLogs so they don't interfere with the TLog flush to the MDFs? I know it's best to have more servers / volumes but I have to make do with whats on hand for now. I appreciate any suggestions.

  Read the article

• Address rewriting postfix

  - by ACHAL

  I am using CentOs5 and postfix as an MTA for my server. My situation is as follows:- I have a mail server through which Php applications connect and send mails to the destination addresses. The problem is that the the application servers do not have spf/dkim record set up and my server which actually relays the mails to the network has spf/dkim records. So i want the mail sent by an application having a return address:[email protected] to change to [email protected]. r09.4reseller.org is hostname of my mail server. This i have done by generic mapping in postfix: smtp_generic_maps = hash:/etc/postfix/generic In /etc/postfix/generic: [email protected] [email protected] This is working as return address is changed to [email protected] when mail is sent. But when i try to sent mail on [email protected] I don't get mail on [email protected]. I have tried virtual mapping in postfix i.e by the file /etc/postfix/virtual but its not helping.

  Read the article

• How to delete system default printer forms?

  - by matt wilkie

  On Windows there are system default printer forms which can't be deleted from the Print Server Properties dialog. Is there some other way they can be removed? We are never going to use page sizes like Envelope, B5(JIS), US Std Fanfold, etc. and I'd like to save users (and myself!) from having to scroll through a big long list of noise. Our print servers are Windows Server 2003 if that makes any difference. thanks.

  Read the article

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• Windows diagnostic tools

  - by Tathagata

  I just joined a small computer lab which basically uses all Windows boxes and a few Windows Sever 2003. Coming from a *nix background I am missing all the nice tools that we have for diagnosis and troubleshooting. My question is what are the safe, free (not terribly concerned if it is like beer or freedom -both acceptable) tools out there that Windows system admins use for their day to day troubleshooting (network, applications, servers etc). I am aware of the tools that come with Windows (and their limited capabilites) - so my query is with what do you fill in your arsenal? (may be a list of win versions of tools that come in standard linux distros)

  Read the article

• Remote Software Solution that Acts as a Client

  - by Richard

  I am looking for something that I am not sure exists. I have a remote computer that will not allow incoming traffic due to ISP blocking of ports(basically double NAT situation that I am unable to get around). I am wondering if I have a computer acting as a client, is there any solution out there that will allow remote access to the computer. I do have other servers on the net that have static IP's that the computer could initiate a connection with. I am thinking of using Debian Linux, However computer is not built yet so OS is not overly important at this point.

  Read the article

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Do I need a VPN to secure communication over a T1 line?

  - by Seth

  I have a dedicated T1 line that runs between my office and my data center. Both ends have public IP addresses. On both ends, we have a T1 routers which connect to SonicWall firewalls. The SonicWalls do a site-to-site VPN and handle the network translation, so the computers on the office network (10.0.100.x) can access the servers in the rack (10.0.103.x). So the question: can I just add a static route to the SonicWalls so each network can access each other with out the VPN? Are there security problems (such as, someone else adding the appropriate static route and being able to access either the office or the datacenter)? Is there another / better way to do it? The reason I'm looking at this is because the T1 is already a pretty small pipe, and having the VPN overhead makes connectivity really slow.

  Read the article

• Do two portforward rules translate to "and"?

  - by blsub6

  I just set up an Exchange server to replace my DeskNow mail server. I want to start testing my internet mail exchange of my Exchange server. I can only set the MX records on my DNS up to my one external IP address so I was thinking that I could set up a firewall rule on my internet-facing firewall that port forwarded the smtp packets to two different servers. My question is: If I do that, will that mean that the smtp packets will be forwarded to just the first internal IP on the list? Or does it mean that the packet will be cloned and sent to both IPs?

  Read the article

• Active Directory replication failing with Access is Denied

  - by Justin Love

  I recently discovered that Active Directory replication started failing about a month ago. If I attempt to Replicate Now from the failing domain controller, I receive The following error occurred during the attempt to synchronize the domain controllers: Access is denied. It is between two servers at a remote site. One is Windows 2003 and the other is Windows 2000; the Windows 2000 machines is experiencing the errors. The domain is older OUR_DOMAIN style. Attempts so far: I disabled Kerberos service on the Windows 2000 server and restarted RPC and RPC locater services have expected settings HKEY_Local_Machine\Software\Microsoft\Rpc\ClientProtocols missing ncacn_nb_tcp on Windows 20003 server (added) Portqry reports okay Firewall disabled netdom resetpwd (and reboot) on Windows 2000 server.

  Read the article

• Disable NSS LDAP IPv6 (AAAA) lookups

  - by pilcrow

  Question: How can I disable inet6 AAAA queries for my LDAP server during (LDAP-backed) NSS lookups on a CentOS (RHEL) 5 machine? Background: I've servers configured to consult ldap://ldap.internal for NSS passwd and group lookups. Every relevant NSS lookup, for example the getpwuid(3) implied by an ls -l which needs to translate UIDs to network user names, performs the following DNS dance before connecting to the ldap server: AAAA? ldap.internal -> (no records) AAAA? ldap.internal.internal -> NXDomain A? ldap.internal -> 192.168.3.89 I'd like to skip the first two queries completely. Configuration: [server]$ cat /etc/redhat-release CentOS release 5.4 (Final) [server]$ grep ^passwd /etc/nsswitch.conf passwd: files ldap [server]$ grep ^uri /etc/ldap.conf uri ldap://ldap.internal/ For what it's worth, IPv6 support is otherwise disabled on these systems: [server]$ grep off /etc/modprobe.conf alias ipv6 off alias net-pf-10 off [server]$ echo "$(ip a | grep -c inet6) IPv6-enabled interfaces" 0 IPv6-enabled interfaces

  Read the article

• Does SMTP greylisting a) stop much spam and b) stop much legitimate mail?

  - by Whisk

  I've just set up an SMTP server on a relatively little used domain using Postfix and enabled greylisting with SQLGrey. So far it seems to be working OK, and while there's the slight irritation of delays to emails from new senders, I can see from the logs that it's deterring a number of spam messages. In your experience does greylisting effectively stop much spam? Is it a useful addition to e.g. SpamAssassin or is adding it on top overkill/unnecessary? If I were to roll this out to heavier use domains (perhaps with more demanding users) would you anticipate a significant portion of poorly configured mail servers that would end up bouncing or losing messages?

  Read the article

• Postfix Vacation.pl with local users

  - by Simiyu

  Hi, I am trying to setup the vacation.pl script on a mail servers which has local users only (since they are only 10 users). I have installed the SquirrelMail plugin and the Auto respond option is available for the users, but when an email is sent to the addresses no auto reply email is sent to the sender. There are also no logs on the /var/log/vacation folder which i created as well as the normal log files. Most of the examples online refer to virtual users, can it work with local users? and if so how? regards, Arthur

  Read the article

• Distributed Nagios Installation

  - by kruczkowski

  I'm looking for a plug-in or product that will act as a remote probe and perform tests then send back the results to the central Nagios server. Reason for this is that I'd like to monitor internal systems and servers at customers, but don't want to allow all the traffic passing the firewalls. Ideally I'd like a soft-probe that would be installed and then perform the tests and send back the results (via SSH) to the central Nagios installation. Does anyone know of a product or plug-in that would offer such service? If not Nagios, is there any other monitoring system that does such a thing (ideally open-source)?

  Read the article

• How are my DNS entries safe in a shared hosting environment?

  - by Jake

  I'm trying to understand how DNS works in a shared hosting environment. I went to my registrar and set my name servers to my host's ns1.foo.com and ns2.foo.com. I'm using a cloud hosting provider who has a web portal where I can set my DNS entries. However I am confused by the lack of security. when I entered in the entries for my domain there was never any step to prove that I actually own that domain. What is to stop somebody else on the same hosting service (a nasty neighbor) from writing over my DNS entries and pointing my traffic to their server instead?

  Read the article

• Can domain "masking" be setup in BIND\cPanel

  - by ServerAdminGuy45

  I am supporting a client, let's say he has the domain "acme.com". He registered with GoDaddy and set the name servers to point to his crappy hostgator shared account. He uses cPanel on the hostgator account to set up his subdomains. Is it possible to setup some kind of domain masking so that when someone connects to "application.acme.com", it really forwards to "cloud-solution-provider.com". I mean the actual domain "cloud-solution-provider.com" because it resolves to different IPs based upon geolocation. For this reason I can't just set application.acme.com to point to the IP that cloud-solution-provider.com resolves to. I want the ability for a user to RDP to "application.acme.com" and be sent to the desktop served by "cloud-solution-provider.com", whatever that IP may be. Perhaps I can have GoDaddy be the nameserver? I have a feeling this would break Hostgator since there is a website at acme.com and shop.acme.com

  Read the article

• Plesk directory structure problems

  - by johnnietheblack

  I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

  Read the article

• ISPs with good upload speeds? [closed]

  - by Josh Comley

  I am a web developer, and I spend most of my time not waiting for downloads but waiting for my latest build of a website to publish to a test site. I use the excellent BeyondCompare to ensure I only upload what I need to upload. But still, if a 2MB C# DLL has changed, so be it. And I must wait. At work we host our own servers and have a dedicated line, so for 8.5 hours of my day I have blistering upload speeds across the web, which is nice. At home however, it's a different story. I am with Virgin Media on their XL internet package (I think). I think that means I get 256Kb upload and 20Mb download. So I have began to wonder - are there any ISPs in the UK with good upload speeds? If you know of any for other countries, do post for other's sake, but please specify which country your post is relevant to.

  Read the article

• What is a good solution for an adaptive iptables daemon?

  - by Matt

  I am running a series of web servers and already have a pretty good set of firewall rules set up, however I'm looking for something to monitor the traffic and add rules as needed. I have denyhosts monitoring for bad SSH logins, and that's great - but I'd love something I could apply to the whole machine that would help prevent bute force attacks against my web applications as well, and add rules to block IPs that display evidence of common attacks. I've seen APF, but it looks as though it hasn't been updated in several years. Is it still in use and would it be good for this? Also, what other solutions are out there that would manipulate iptables to behave in some adaptive fashion? I'm running Ubuntu Linux, if that helps.

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >