linux intel - Page 320 - Developer IT

Ubuntu 12.04 dual monitor reset bug

- by Tentresh

My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

Read the article

how to install ffmpeg in cpanel

- by Ajay Chthri

i'm using dedicated server(linux) so i need to install ffmpeg in cpanel so here ffmpeg i found in Main Software Install a Perl Module but i writing script in php so how can i install ffmpeg phpperl when i'am trying to install ffmpeg in perl module i get this response Checking C compiler....C compiler (/usr/bin/cc) OK (cached Tue Jan 17 19:16:31 2012)....Done CPAN fallback is disabled since /var/cpanel/conserve_memory exists, and cpanm is available. Method: Using Perl Expect, Installer: cpanm You have make /usr/bin/make Falling back to HTTP::Tiny 0.009 You have /bin/tar: tar (GNU tar) 1.15.1 You have /usr/bin/unzip You have Cpanel::HttpRequest 2.1 Testing connection speed...(using fast method)...Done Ping:2 (ticks) Testing connection speed to cpan.knowledgematters.net using pureperl...(28800.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.develooper.com using pureperl...(22233.33 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.schatt.com using pureperl...(32750.00 bytes/s)...Done Ping:3 (ticks) Testing connection speed to cpan.mirror.facebook.net using pureperl...(14050.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.mirrors.hoobly.com using pureperl...(5150.00 bytes/s)...Done Five usable mirrors located Ping:0 (ticks) Testing connection speed to 208.109.109.239 using pureperl...(28950.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to 208.82.118.100 using pureperl...(19300.00 bytes/s)...Done Ping:1 (ticks) Testing connection speed to 69.50.192.73 using pureperl...(19300.00 bytes/s)...Done Three usable fallback mirrors located Mirror Check passed for cpan.schatt.com (/index.html) Searching on cpanmetadb ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:0).......(request attempt 1/12)...Using dns cache file /root/.HttpRequest/cpanmetadb.cpanel.net......searching for mirrors (mirror search attempt 1/3)......5 usable mirrors located. (less then expected)......mirror search success......connecting to 208.74.123.82...@208.74.123.82......connected......receiving...100%......request success......Done Searching Video::FFmpeg on cpanmetadb (http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release) ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:1).......(request attempt 1/12)[email protected]%......request success......Done Source: fastest CPAN mirror ... --> Working on Video::FFmpeg Fetching http://cpan.schatt.com//authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz ... Fetching http://cpan.schatt.com/authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz (connected:1).......(request attempt 1/12)...Resolving cpan.schatt.com...(resolve attempt 1/65)......connecting to 66.249.128.125...@66.249.128.125......connected......receiving...25%...50%...75%...100%......request success......Done OK Unpacking Video-FFmpeg-0.47.tar.gz Video-FFmpeg-0.47/ Video-FFmpeg-0.47/Changes Video-FFmpeg-0.47/FFmpeg.xs Video-FFmpeg-0.47/MANIFEST Video-FFmpeg-0.47/META.yml Video-FFmpeg-0.47/Makefile.PL Video-FFmpeg-0.47/README Video-FFmpeg-0.47/lib/ Video-FFmpeg-0.47/lib/Video/ Video-FFmpeg-0.47/lib/Video/FFmpeg/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVFormat.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Audio.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Subtitle.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Video.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream.pm Video-FFmpeg-0.47/lib/Video/FFmpeg.pm Video-FFmpeg-0.47/ppport.h Video-FFmpeg-0.47/t/ Video-FFmpeg-0.47/t/Video-FFmpeg.t Video-FFmpeg-0.47/test Video-FFmpeg-0.47/test.mp4 Video-FFmpeg-0.47/typemap Entering Video-FFmpeg-0.47 Checking configure dependencies from META.yml META.yml not found or unparsable. Fetching META.yml from search.cpan.org Fetching http://search.cpan.org/meta/Video-FFmpeg-0.47/META.yml (connected:1).......(request attempt 1/12)...Resolving search.cpan.org...(resolve attempt 1/65)......connecting to 199.15.176.161...@199.15.176.161......connected......receiving...100%......request success......Done Configuring Video-FFmpeg-0.47 ... Running Makefile.PL Perl v5.10.0 required--this is only v5.8.8, stopped at Makefile.PL line 1. BEGIN failed--compilation aborted at Makefile.PL line 1. N/A ! Configure failed for Video-FFmpeg-0.47. See /home/.cpanm/build.log for details. Perl Expect failed with non-zero exit status: 256 All available perl module install methods have failed guide me how can i install ffmpeg in cPanel Thanks for advance.

Read the article

Trying to update debian not working

- by Sean

As root i type this command apt-get update and get these error messages. > Err http://security.debian.org lenny/updates Release.gpg Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/main Translation-en_US Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/contrib Translation-en_US Could not resolve 'security.debian.org' Err http://security.debian.org lenny/updates/non-free Translation-en_US Could not resolve 'security.debian.org' Err http://www.backports.org lenny-backports Release.gpg Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/main Translation-en_US Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/contrib Translation-en_US Could not resolve 'www.backports.org' Err http://www.backports.org lenny-backports/non-free Translation-en_US Could not resolve 'www.backports.org' Err http://ftp.us.debian.org lenny Release.gpg Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/main Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/contrib Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://ftp.us.debian.org lenny/non-free Translation-en_US Could not resolve 'ftp.us.debian.org' Err http://http.us.debian.org stable Release.gpg Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/main Translation-en_US Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/contrib Translation-en_US Could not resolve 'http.us.debian.org' Err http://http.us.debian.org stable/non-free Translation-en_US Could not resolve 'http.us.debian.org' Reading package lists... Done W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/Release.gpg Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/main/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/contrib/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://ftp.us.debian.org/debian/dists/lenny/non-free/i18n/Translation-en_US.gz Could not resolve 'ftp.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/Release.gpg Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/main/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/contrib/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://http.us.debian.org/debian/dists/stable/non-free/i18n/Translation-en_US.gz Could not resolve 'http.us.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/Release.gpg Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/main/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/contrib/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://security.debian.org/dists/lenny/updates/non-free/i18n/Translation-en_US.gz Could not resolve 'security.debian.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/Release.gpg Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/main/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/contrib/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Failed to fetch http://www.backports.org/debian/dists/lenny-backports/non-free/i18n/Translation-en_US.gz Could not resolve 'www.backports.org' W: Some index files failed to download, they have been ignored, or old ones used instead. W: You may want to run apt-get update to correct these problems This is on a dreamplug linux server. Configured so that my network starts on 192.168.1.2 and my router is port forwarding ssh to 192.168.1.6 to the server.

Read the article

Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

- by morgant

I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

Read the article

OpenSwan IPSec phase #2 complications

- by XXL

Phase #1 (IKE) succeeds without any problems (verified at the target host). Phase #2 (IPSec), however, is erroneous at some point (apparently due to misconfiguration on localhost). This should be an IPSec-only connection. I am using OpenSwan on Debian. The error log reads the following (the actual IP-addr. of the remote endpoint has been modified): pluto[30868]: "x" #2: initiating Quick Mode PSK+ENCRYPT+PFS+UP+IKEv2ALLOW+SAREFTRACK {using isakmp#1 msgid:5ece82ee proposal=AES(12)_256-SHA1(2)_160 pfsgroup=OAKLEY_GROUP_DH22} pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #1: the peer proposed: 0.0.0.0/0:0/0 - 0.0.0.0/0:0/0 pluto[30868]: "x" #3: responding to Quick Mode proposal {msgid:a4f5a81c} pluto[30868]: "x" #3: us: 192.168.1.76<192.168.1.76[+S=C] pluto[30868]: "x" #3: them: 222.222.222.222<222.222.222.222[+S=C]===10.196.0.0/17 pluto[30868]: "x" #3: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1 pluto[30868]: "x" #3: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2 pluto[30868]: "x" #1: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000 pluto[30868]: "x" #1: received and ignored informational message pluto[30868]: "x" #3: next payload type of ISAKMP Hash Payload has an unknown value: 97 X pluto[30868]: "x" #3: malformed payload in packet pluto[30868]: | payload malformed after IV I am behind NAT and this is all coming from wlan2. Here are the details: default via 192.168.1.254 dev wlan2 proto static 169.254.0.0/16 dev wlan2 scope link metric 1000 192.168.1.0/24 dev wlan2 proto kernel scope link src 192.168.1.76 metric 2 Output of ipsec verify: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.37/K3.2.0-24-generic (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing XFRM related proc values [OK] [OK] [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Two or more interfaces found, checking IP forwarding [OK] Checking NAT and MASQUERADEing [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] This is what happens when I run ipsec auto --up x: 104 "x" #1: STATE_MAIN_I1: initiate 003 "x" #1: received Vendor ID payload [RFC 3947] method set to=109 106 "x" #1: STATE_MAIN_I2: sent MI2, expecting MR2 003 "x" #1: received Vendor ID payload [Cisco-Unity] 003 "x" #1: received Vendor ID payload [Dead Peer Detection] 003 "x" #1: ignoring unknown Vendor ID payload [502099ff84bd4373039074cf56649aad] 003 "x" #1: received Vendor ID payload [XAUTH] 003 "x" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed 108 "x" #1: STATE_MAIN_I3: sent MI3, expecting MR3 004 "x" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp1024} 117 "x" #2: STATE_QUICK_I1: initiate 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 20s for response 010 "x" #2: STATE_QUICK_I1: retransmission; will wait 40s for response 031 "x" #2: max number of retransmissions (2) reached STATE_QUICK_I1. No acceptable response to our first Quick Mode message: perhaps peer likes no proposal 000 "x" #2: starting keying attempt 2 of at most 3, but releasing whack I have enabled NAT traversal in ipsec.conf accordingly. Here are the settings relative to the connection in question: version 2.0 config setup plutoopts="--perpeerlog" plutoopts="--interface=wlan2" dumpdir=/var/run/pluto/ nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn x authby=secret pfs=yes auto=add phase2alg=aes256-sha1;dh22 keyingtries=3 ikelifetime=8h type=transport left=192.168.1.76 leftsubnet=192.168.1.0/24 leftprotoport=0/0 right=222.222.222.222 rightsubnet=10.196.0.0/17 rightprotoport=0/0 Here are the specs provided by the other end that must be met for Phase #2: encryption algorithm: AES (128 or 256 bit) hash algorithm: SHA local ident1 (addr/mask/prot/port): (10.196.0.0/255.255.128.0/0/0) local ident2 (addr/mask/prot/port): (10.241.0.0/255.255.0.0/0/0) remote ident (addr/mask/prot/port): (x.x.x.x/x.x.x.x/0/0) (internal network or localhost) Security association lifetime: 4608000 kilobytes/3600 seconds PFS: DH group2 So, finally, what might be the cause of the issue that I am experiencing? Thank you.

Read the article

DHCPDISCOVER requests from an off-by-one MAC address

- by Aleksandr Levchuk

In a Linux DHCP server I'm getting a bunch of these log lines: dhcpd: DHCPDISCOVER from 00:30:48:fe:5c:9c via eth1: network 192.168.2.0/24: no free leases I don't have any machines with 00:30:48:fe:5c:9c and I don't intend to give out an IP to 00:30:48:fe:5c:9c (whatever that could be). I tracked down the server that this is coming from and killed all the DHCP clients that were running but the DHCPDISCOVER requests do not stop. I can prove that this is the sending server by pulling the Ethernet cable - the requests stop. The strange thing is that the sending server only has 2 interfaces which are: 00:30:48:fe:5c:9a 00:30:48:fe:5c:9b What can be the cause of the off-by-one address? Who could be sending the requests? Details On the DHCP client: root@n34:~# ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 100 link/ether 00:30:48:fe:5c:9a brd ff:ff:ff:ff:ff:ff 3: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 00:30:48:fe:5c:9b brd ff:ff:ff:ff:ff:ff 4: ib0: <BROADCAST,MULTICAST> mtu 2044 qdisc noop state DOWN qlen 256 link/infiniband 80:00:00:48:fe:80:00:00:00:00:00:00:00:02:c9:03:00:08:81:9f brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff 5: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP qlen 256 link/infiniband 80:00:00:49:fe:80:00:00:00:00:00:00:00:02:c9:03:00:08:81:a0 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff Same info: root@n34:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:30:48:fe:5c:9a inet addr:192.168.2.234 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fefe:5c9a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:72544 errors:0 dropped:0 overruns:0 frame:0 TX packets:152773 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:4908592 (4.6 MiB) TX bytes:89815782 (85.6 MiB) Memory:dfd60000-dfd80000 eth1 Link encap:Ethernet HWaddr 00:30:48:fe:5c:9b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:dfde0000-dfe00000 ib0 Link encap:UNSPEC HWaddr 80-00-00-48-FE-80-00-00-00-00-00-00-00-00-00-00 BROADCAST MULTICAST MTU:2044 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:256 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ib1 Link encap:UNSPEC HWaddr 80-00-00-49-FE-80-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.3.234 Bcast:192.168.3.255 Mask:255.255.255.0 inet6 addr: fe80::202:c903:8:81a0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:2044 Metric:1 RX packets:1330 errors:0 dropped:0 overruns:0 frame:0 TX packets:255 errors:0 dropped:5 overruns:0 carrier:0 collisions:0 txqueuelen:256 RX bytes:716415 (699.6 KiB) TX bytes:17584 (17.1 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B) The nodes were imaged with Perseus which uses kexec instead of rebooting.

Read the article

Why is this mod_rewrite RewriteRule directive not working in the .htaccess file?

- by morgant

I've got a site that was hosted on a linux el cheapo hosting service that I'm migrating to my Mac OS X 10.5 Leopard Server server running Apache 2.2.8 & PHP 5.2.5 w/rewrite_module enabled and AllowOverride All, but I'm running into an issue with the following lines in the .htaccess file: RewriteEngine On #RewriteRule ^view/([^/\.]+)/?$ /view.php?item=$1 [L] #RewriteRule ^order/([^/\.]+)/?$ /order.php?item=$1 [L] RewriteRule ^category/([^/\.]+)/?$ /category.php?category=$1 [L] As you can see, I've commented out the RewriteRule directives for /view/ and /order/, so I'm only dealing with /category/. When I attempt to load http://domain.tld/category/2/ it runs category.php (I've added debug code to confirm), but $_SERVER['REQUEST_URI'] comes through as /category/2/ and $_GET['category'] comes through as empty. I'm usually fine with troubleshooting .htaccess files and mod_rewrite directives, but this one's got me stumped for some reason. Update: I followed Josh's suggestion and here's the what's dumped to mod_rewrite.log when I try to access http://domain.tld/category/2/: 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (2) init rewrite engine with requested uri /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) applying pattern '.*' to uri '/category/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) pass through /category/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6aa98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] add path info postfix: /Library/WebServer/Documents/tld.domain.www/category.php -> /Library/WebServer/Documents/tld.domain.www/category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/category.php/13 -> category.php/13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri 'category.php/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b5ea98/initial] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/category.php 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (2) init rewrite engine with requested uri /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) applying pattern '.*' to uri '/13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) pass through /13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] strip per-dir prefix: /Library/WebServer/Documents/tld.domain.www/13 -> 13 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (3) [perdir /Library/WebServer/Documents/tld.domain.www/] applying pattern '^category/([^/\.]+)/?$' to uri '13' 65.19.81.253 - - [22/Oct/2009:17:31:53 --0400] [domain.tld/sid#100aae0b0][rid#100b6ea98/subreq] (1) [perdir /Library/WebServer/Documents/tld.domain.www/] pass through /Library/WebServer/Documents/tld.domain.www/13

Read the article

Determining cause of high NFS/IO utilization without iotop

- by Matt

I have a server that is doing an NFSv4 export for user's home directories. There are roughly 25 users (mostly developers/analysts) and about 40 servers mounting the home directory export. Performance is miserable, with users often seeing multi-second lags for simple commands (like ls, or writing a small text file). Sometimes the home directory mount completely hangs for minutes, with users getting "permission denied" errors. The hardware is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for the home directories. What I find curious, and suspicious, is that the sda device often has very high utilization, even though it only contains the OS. I would expect this virtual drive to be idle almost all the time. The system is not swapping, according to "free" and "vmstat". Why would there be major load on this device? Here is a 30-second snapshot from iostat: Time: 09:37:28 AM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sdb 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 sdb1 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 dm-0 0.00 0.00 0.03 151.82 0.13 607.26 8.00 1.25 8.23 5.16 78.35 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 dm-3 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 Looks like iotop is the ideal tool to use to sniff out these kinds of issues. But I'm on CentOS 5.6, which doesn't have a new enough kernel to support that program. I looked at Determining which process is causing heavy disk I/O?, and besides iotop, one of the suggestions said to do a "echo 1 /proc/sys/vm/block_dump". I did that (after directing kernel messages to tempfs). In about 13 minutes I had about 700k reads or writes, roughly half from kjournald and the other half from nfsd: # egrep " kernel: .*(READ|WRITE)" messages | wc -l 768439 # egrep " kernel: kjournald.*(READ|WRITE)" messages | wc -l 403615 # egrep " kernel: nfsd.*(READ|WRITE)" messages | wc -l 314028 For what it's worth, for the last hour, utilization has constantly been over 90% for the home directory drive. My 30-second iostat keeps showing output like this: Time: 09:36:30 PM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sdb 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 sdb1 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 dm-0 0.00 0.00 0.20 17.76 0.80 71.04 8.00 0.38 21.21 9.22 16.57 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.81 dm-3 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.82

Read the article

I want to change DPI with Imagemagick without changing the actual byte-size of the image data

- by user1694803

I feel so horribly sorry that I have to ask this question here, but after hours of researching how to do an actually very simple task I'm still failing... In Gimp there is a very simple way to do what I want. I only have the German dialog installed but I'll try to translate it. I'm talking about going to "Picture-PrintingSize" and then adjusting the Values "X-Resolution" and "Y-Resolution" which are known to me as so called DPI values. You can also choose the format which by default is "Pixel/Inch". (In German the dialog is "Bild-Druckgröße" and there "X-Auflösung" and "Y-Auflösung") Ok, the values there are often "72" by default. When I change them to e.g. "300" this has the effect that the image stays the same on the computer, but if I print it, it will be smaller if you look at it, but all the details are still there, just smaller - it has a higher resolution on the printed paper (but smaller size... which is fine for me). I am often doing that when I am working with LaTeX, or to be exact with the command "pdflatex" on a recent Ubuntu-Machine. When I'm doing the above process with Gimp manually everything works just fine. The images will appear smaller in the resulting PDF but with high printing quality. What I am trying to do is to automate the process of going into Gimp and adjusting the DPI values. Since Imagemagick is known to be superb and I used it for many other tasks I tried to achieve my goal with this tool. But it does just not do what I want. After trying a lot of things I think this actually is be the command that should be my friend: convert input.png -density 300 output.png This should set the DPI to 300, as I can read everywhere in the web. It seems to work. When I check the file it stays the same. file input.png output.png input.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced output.png: PNG image data, 611 x 453, 8-bit grayscale, non-interlaced When I use this command, it seems like it did what I wanted: identify -verbose output.png | grep 300 Resolution: 300x300 PNG:pHYs : x_res=300, y_res=300, units=0 (Funny enough, the same output comes for input.png which confuses me... so this might be the wrong parameters to watch?) But when I now render my TeX with "pdflatex" the image is still big and blurry. Also when I open the image with Gimp again the DPI values are set to "72" instead of "300". So there actually was no effect at all. Now what is the problem here. Am I getting something completely wrong? I can't be that wrong since everything works just fine with Gimp... Thanks for any help in this. I am also open to other automated solutions which are easily done on a Linux system...

Read the article

proftpd, dynamic IP, and filezilla: port troubles

- by Yami

The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

Read the article

Dhcpd Daemon is trying to lease itself?

- by tommieb75

I have a Slackware Linux 13.0 box with two interfaces, eth0 and eth1. I have set this box up to be on the 192.168.1.0/24 network, with subnet mask of 255.255.255.0. I am trying to run a dhcpd server on this box to service two interfaces above, so I subnetted the 192.168.1.0/24 network into two subnets. For eth0 192.168.1.1, subnet mask 255.255.255.128, broadcast mask 192.168.1.127. For eth1 192.168.1.129, subnet mask 255.255.255.128, broadcast mask 192.168.1.255. Both the interfaces are assigned manually. eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.1 Bcast:192.168.1.127 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:39 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB) Interrupt:11 Base address:0x8000 Memory:faffc000-faffcfff eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.128 Bcast:192.168.1.255 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10003 errors:0 dropped:0 overruns:0 frame:0 TX packets:13286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1589229 (1.5 MiB) TX bytes:9900005 (9.4 MiB) Interrupt:11 Here is the dhcpd.conf set up authoritative; ddns-update-style interim; ignore client-updates; subnet 192.168.1.0 netmask 255.255.255.128 { range 192.168.1.2 192.168.1.126; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.127; option subnet-mask 255.255.255.128; } subnet 192.168.1.128 netmask 255.255.255.128 { range 192.168.1.129 192.168.1.254; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.255; option subnet-mask 255.255.255.128; } This is what is showing in the log Apr 10 18:09:58 inspiron8600 dhcpd: DHCPDISCOVER from 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:09:58 inspiron8600 dhcpd: DHCPOFFER on 192.168.1.131 to 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:10:01 inspiron8600 dhcpcd[3832]: eth1: adding IP address 169.254.153.6/16 This is happening spuriously, and the log gets filled up with nonsense..so my question is this: How do I stop this from happening? And why would it be trying to give itself a lease? I am sure I have missed something but cannot see it and would appreciate a pair of eyes from the community to spot the obvious flaw!

Read the article

A faulty Caviar Blue hard drive?

- by Glister

We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

Read the article

mod_mono 'Service Temporarily Unavailable' issue

- by Charlie Somerville

I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

Read the article

Samba4 [homes] share

- by SambaDrivesMeCrazy

I am having issues with the [homes] share. OS is Ubuntu 12.04. I've installed samba 4.0.3, bind9 dlz, ntp, winbind, everything but pam modules, and did all the tests from https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO. Running getent passwd and getent user work just fine. Creating a simple share works just fine too. I can manage the users, GPOs, and DNS from the windows mmc snap-ins. I can join winxp,7,8 to the domain and log on perfectly. I can change my passwords from windows, etc..etc.. I could say that everything is fine and be happy :) buuuut, no, home directories do not work. Searching in here, and on our good friend google I gathered that a simple [homes] read only = no path = /storage-server/users/ and mapping the user's home folder in dsa.msc to \\server-001\username or \\server-001\homes should get me a home share I could map for my user homedir. But the snap-in give me an error saying that it cannot create the home folder because the network name has not been found (rough translation from portuguese). also, running root@server-001:/storage-server/users# smbclient //server-001/test -Utest%'12345678' -c 'ls' Domain=[MYDOMAIN] OS=[Unix] Server=[Samba 4.0.3] tree connect failed: NT_STATUS_BAD_NETWORK_NAME Server name is alright, if I go for a simple share on the same server it opens just fine. If I map the user homedir to this simple share it works. What I want is that I dont have to go and manually make a new folder on linux everytime I create a new user on windows. It looks like permissions but I cant find any documentation on this (yes I've tried the manpages, but its hard to tell with so many options on man smb.conf alone). My smb.conf right now looks like this (pretty simple I know) # Global parameters [global] workgroup = MYDOMAIN realm = MYDOMAIN.LAN netbios name = SERVER-001 server role = active directory domain controller server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbind, ntp_signd, kcc, dnsupdate [netlogon] path = /usr/local/samba/var/locks/sysvol/mydomain.lan/scripts read only = No [sysvol] path = /usr/local/samba/var/locks/sysvol read only = No [homes] read only = no path = /storage-server/users Folder permissions /storage-server drwxr-xr-x 6 root root 4096 Fev 15 15:17 storage-server /storage-server/users drwxrwxrwx 6 root root 4096 Fev 18 17:05 users/ Yes, I was desperate enough to set 777 on the users folder... not proud of it. Any pointers in the right direction would be very welcome. Edited to include: root@server-001:/# wbinfo --user-info=test MYDOMAIN\test:*:3000045:100:test:/home/MYDOMAIN/test:/bin/false root@server-001:/# wbinfo -n test S-1-5-21-1957592451-3401938807-633234758-1128 SID_USER (1) root@server-001:/# id test uid=3000045(MYDOMAIN\test) gid=100(users) grupos=100(users) root@server-001:/# wbinfo -U 3000045 S-1-5-21-1957592451-3401938807-633234758-1128 root@server-001:/# Edit 2: getent passwd | grep test MYDOMAIN\test:*:3000045:100:test:/home/MYDOMAIN/test:/bin/false I have no idea how to change that home folder to /storage-server/users/test so I just went and ln -s /storage-server/users /home/MYDOMAIN just in case. still, no changes, same errors. Edit 3 On log.smbd I get the following error when trying to set the test user home folder to \server-001\test [2013/02/20 14:22:08.446658, 2] ../source3/smbd/service.c:418(create_connection_session_info) user 'MYDOMAIN\Administrator' (from session setup) not permitted to access this share (test)

Read the article

nginx 502 Bad Gateway on every external site

- by Leandros

I just installed nginx and followed the guides on the official site, to set it up with php5-fpm, but it just won't work. Not even the default site, without php is working outside of my server. Tried listen = 127.0.0.1:7777 and listen = /var/run/php5-fpm.sock Both don't work. I can access http://localhost with lynx on my server, but not from somewhere else (with external ip obviously). Yes, the php5-fpm deamons are running, yes the port (80 and 7777) is opened. Don't work with php-cgi as well. My config: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; # server_tokens off; # server_names_hash_bucket_size 64; # server_name_in_redirect off; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_disable "msie6"; # gzip_vary on; # gzip_proxied any; # gzip_comp_level 6; # gzip_buffers 16 8k; # gzip_http_version 1.1; # gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; ## # nginx-naxsi config ## # Uncomment it if you installed nginx-naxsi ## #include /etc/nginx/naxsi_core.rules; ## # nginx-passenger config ## # Uncomment it if you installed nginx-passenger ## #passenger_root /usr; #passenger_ruby /usr/bin/ruby; ## # Virtual Host Configs ## include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; proxy_buffers 16 16k; proxy_buffer_size 32k; fastcgi_buffers 16 16k; fastcgi_buffer_size 32k; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; } Server config: (symlinked to sites-enabled) server { server_name skilloverflow.de *.skilloverflow.de; root /var/www/blog.skilloverflow.de/htdocs; index index.php; error_log /var/log/nginx/skilloverflow.error.log; access_log /var/log/nginx/skilloverflow.access.log; location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location / { # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; if (!-f $document_root$fastcgi_script_name) { return 404; } fastcgi_pass 127.0.0.1:7777; fastcgi_index index.php; include fastcgi_params; } location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires max; log_not_found off; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } # deny access to apache .htaccess files location ~ /\.ht { deny all; } } PHP Version: 5.4.17-1 nginx version: 1.2.1 Debian 6.0.7 Linux 2.6.32 Edit: Lighttpd is still installed, does that matter? It's not running though. Edit 2: No error or access log is generated. They're all empty.

Read the article

compile lastest bnx2 driver on debian squeeze

- by markus

I want to upgrade the bnx2 network card driver in a Dell Power Edge R410. I downloaded the latest driver version from the broadcom website. If I want to compile the driver it fails with the following errors: make make -C bnx2/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C /lib/modules/2.6.32-5-amd64/build SUBDIRS=/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' Building modules, stage 2. MODPOST 2 modules make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2-2.0.23b/src' make -C bnx2x/src KVER=2.6.32-5-amd64 PREFIX= make[1]: Entering directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make -C /lib/modules/2.6.32-5-amd64/build M=`pwd` modules make[2]: Entering directory `/usr/src/linux-headers-2.6.32-5-amd64' CC [M] /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1009:1: error: "PCI_VPD_LRDT_ID_STRING" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1327:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1011:1: error: "PCI_VPD_LRDT_RO_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1328:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1013:1: error: "PCI_VPD_LRDT_RW_DATA" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1329:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1019:1: error: "PCI_VPD_SRDT_END" redefined In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:34: /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1334:1: error: this is the location of the previous definition In file included from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x.h:68, from /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.c:80: /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1032: error: conflicting types for ‘pci_vpd_lrdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1355: error: previous definition of ‘pci_vpd_lrdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1037: error: conflicting types for ‘pci_vpd_srdt_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1366: error: previous definition of ‘pci_vpd_srdt_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1042: error: conflicting types for ‘pci_vpd_find_tag’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1391: error: previous declaration of ‘pci_vpd_find_tag’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1077: error: conflicting types for ‘pci_vpd_info_field_size’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1377: error: previous definition of ‘pci_vpd_info_field_size’ was here /tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_compat.h:1082: error: conflicting types for ‘pci_vpd_find_info_keyword’ /usr/src/linux-headers-2.6.32-5-common/include/linux/pci.h:1403: error: previous declaration of ‘pci_vpd_find_info_keyword’ was here make[5]: *** [/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src/bnx2x_main.o] Fehler 1 make[4]: *** [_module_/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src] Fehler 2 make[3]: *** [sub-make] Fehler 2 make[2]: *** [all] Fehler 2 make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-5-amd64' make[1]: *** [bnx2x.o] Fehler 2 make[1]: Leaving directory `/tmp/netxtreme2-6.2.23/bnx2x-1.62.15/src' make: *** [l2build] Fehler 2

Read the article

Call to daemon in a /etc/init.d script is blocking, not running in background

- by tony

I have a Perl script that I want to daemonize. Basically this perl script will read a directory every 30 seconds, read the files that it finds and then process the data. To keep it simple here consider the following Perl script (called synpipe_server, there is a symbolic link of this script in /usr/sbin/) : #!/usr/bin/perl use strict; use warnings; my $continue = 1; $SIG{'TERM'} = sub { $continue = 0; print "Caught TERM signal\n"; }; $SIG{'INT'} = sub { $continue = 0; print "Caught INT signal\n"; }; my $i = 0; while ($continue) { #do stuff print "Hello, I am running " . ++$i . "\n"; sleep 3; } So this script basically prints something every 3 seconds. Then, as I want to daemonize this script, I've also put this bash script (also called synpipe_server) in /etc/init.d/ : #!/bin/bash # synpipe_server : This starts and stops synpipe_server # # chkconfig: 12345 12 88 # description: Monitors all production pipelines # processname: synpipe_server # pidfile: /var/run/synpipe_server.pid # Source function library. . /etc/rc.d/init.d/functions pname="synpipe_server" exe="/usr/sbin/synpipe_server" pidfile="/var/run/${pname}.pid" lockfile="/var/lock/subsys/${pname}" [ -x $exe ] || exit 0 RETVAL=0 start() { echo -n "Starting $pname : " daemon ${exe} RETVAL=$? PID=$! echo [ $RETVAL -eq 0 ] && touch ${lockfile} echo $PID > ${pidfile} } stop() { echo -n "Shutting down $pname : " killproc ${exe} RETVAL=$? echo if [ $RETVAL -eq 0 ]; then rm -f ${lockfile} rm -f ${pidfile} fi } restart() { echo -n "Restarting $pname : " stop sleep 2 start } case "$1" in start) start ;; stop) stop ;; status) status ${pname} ;; restart) restart ;; *) echo "Usage: $0 {start|stop|status|restart}" ;; esac exit 0 So, (if I have well understood the doc for daemon) the Perl script should run in the background and the output should be redirected to /dev/null if I execute : service synpipe_server start But here is what I get instead : [root@master init.d]# service synpipe_server start Starting synpipe_server : Hello, I am running 1 Hello, I am running 2 Hello, I am running 3 Hello, I am running 4 Caught INT signal [ OK ] [root@master init.d]# So it starts the Perl script but runs it without detaching it from the current terminal session, and I can see the output printed in my console ... which is not really what I was expecting. Moreover, the PID file is empty (or with a line feed only, no pid returned by daemon). Does anyone have any idea of what I am doing wrong ? EDIT : maybe I should say that I am on a Red Hat machine. Scientific Linux SL release 5.4 (Boron) Would it do the job if instead of using the daemon function, I use something like : nohup ${exe} >/dev/null 2>&1 & in the init script ?

Read the article

How to stop Apache from crashing my entire server?

- by CyberShadow

I maintain a Gentoo server with a few services, including Apache. It's fairly low-end (2GB of RAM and a low-end CPU with 2 cores). My problem is that, despite my best efforts, an over-loaded Apache crashes the entire server. In fact, at this point I'm close to being convinced that Linux is a horrible operating system that isn't worth anyone's time looking for stability under load. Things I tried: Adjusting oom_adj for the root Apache process (and thus all its children). That had close to no effect. When Apache was overloaded it would bring the system to a grind, as the system paged out everything else before it got to kill anything. Turning off swap. Didn't help, it would unload memory paged to binaries of processes and other files on /, thus causing the same effect. Putting it in a memory-limited cgroup (limited to 512 MB of RAM, 1/4th of the total). This "worked", at least in my own stress tests - except the server keeps crashing under load (basically stalling all other processes, inaccessible via SSH, etc.) Running it with idle I/O priority. This wasn't a very good idea in the end, because it just caused the system load to climb indefinitely (into the thousands) with almost no visible effect - until you tried to access an unbuffered part of the disk. This caused the task to freeze. (So much for good I/O scheduling, eh?) Limiting the number of concurrent connections to Apache. Setting the number too low caused web sites to become unresponsive due to most slots being occupied with long requests (file downloads). I tried various Apache MPMs without much success (prefork, event, itk). Switching from prefork/event+php-cgi+suphp to itk+mod_php. This improved performance, but didn't solve the actual problem. Switching I/O schedulers (cfq to deadline). Just to stress this out: I don't care if Apache itself goes down under load, I just want the rest of my system to remain stable. Of course, having Apache recover quickly after a brief period of intensive load would be great to have, but one step at a time. Right now I am mostly dumbfounded by how can humanity, in this day and age, design an operating system where such a seemingly simple task (don't allow one system component to crash the entire system) seems practically impossible - or at least, very hard to do. Please don't suggest things like VMs or "BUY MORE RAM". Some more information gathered with a friend's help: The processes hang when the cgroup oom killer is invoked. Here's the call trace: [<ffffffff8104b94b>] ? prepare_to_wait+0x70/0x7b [<ffffffff810a9c73>] mem_cgroup_handle_oom+0xdf/0x180 [<ffffffff810a9559>] ? memcg_oom_wake_function+0x0/0x6d [<ffffffff810aa041>] __mem_cgroup_try_charge+0x32d/0x478 [<ffffffff810aac67>] mem_cgroup_charge_common+0x48/0x73 [<ffffffff81081c98>] ? __lru_cache_add+0x60/0x62 [<ffffffff810aadc3>] mem_cgroup_newpage_charge+0x3b/0x4a [<ffffffff8108ec38>] handle_mm_fault+0x305/0x8cf [<ffffffff813c6276>] ? schedule+0x6ae/0x6fb [<ffffffff8101f568>] do_page_fault+0x214/0x22b [<ffffffff813c7e1f>] page_fault+0x1f/0x30 At this point, the apache memory cgroup is practically deadlocked, and burning CPU in syscalls (all with the above call trace). This seems like a problem in the cgroup implementation...

Read the article

Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

- by Towndrunk

I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

Read the article

Transparent proxy which preserves client mac address

- by A G

I have a customer that wants to intercept SSL traffic as it leaves their network. My proposed solution is to setup a proxy that is transparent and both layer 2 and layer 3 so it can simply be dropped into their network without any change in config required. The proxy has two NICs, one connected to the server, the other to the client. The client, proxy and gateway are under control of the customer, the server is not. For example: client --- Proxy --- gateway -|- server I have my proxy program configured with IP_TRANSPARENT socket option to it can respond to connections destined for a remote IP. I am using the following setup: iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 3128 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1 ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 The client in question is on its own subnet and has been configured so that the proxy is the default gateway. The result is: Client sends a frame to the proxy; source IP is client, source mac is client, destination IP is server, destination mac is proxy Proxy forwards this frame to the gateway; source IP is proxy, source mac is proxy, destination IP is server, destination mac is gateway Gateway forwards this to the server and gets a response back. Gateway sends reply back to proxy; source IP is server, source mac is gateway, destination IP is proxy, destination mac is proxy Proxy forwards this reply to client; source IP is server, source mac is proxy, destination IP is client, destination mac is client. The tproxy and iptables configuration lets the proxy send packets with a non local ip address. Is there a way to make something transparent at the mac address level? That is, put the client on the same subnet as the gateway. The gateway sees the source IP and mac as that of the client, even though they originated from the proxy. Could this be done by configuring the proxy as a bridge then use ebtables to escalate the traffic to be handled by iptables? When I use ebtables to push something up to iptables, it appears my proxy program doesn't respond to the packets as they are destined for the gateways's mac address, not the proxy's. What are some other potential avenues I could investigate? EDIT: When the client and gateway are on different subnets (and client has set the proxy as the gateway), it works as described in 1 to 5. But I want to know if it is possible to have the client and gateway on the same subnet and have the proxy fully transparent (ie client is not aware of the proxy). Thanks! EDIT 2: I can configure the proxy as a bridge using brctl, but cannot find a way to direct this traffic to my proxy program - asked here Possible for linux bridge to intercept traffic?. Currently, with the description numbered 1 to 5, it operates at layer 3; it is transparent on the client side (client thinks it is talking to the server's IP), but not on the gateway side (gateway is talking to the proxy's IP). What I want to find out is, is it possible to make this operate at layer 2, so it is fully transparent? What are the available options I should research? Thanks

Read the article

Has this server been compromised?

- by Griffo

A friend is running a VPS (CentOS) His business partner was the sysadmin but has left him high and dry to look after the system. So, I've been asked to help out in fixing an apparent spam problem. His IP address got blacklisted for unsolicited mail. I'm not sure where to look for a problem, but I started with netstat to see what open connections were running. It looks to me like he has remote hosts connected to his SMTP server. Here's the output: Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 78.153.208.195:imap 86-40-60-183-dynamic.:10029 ESTABLISHED tcp 0 0 78.153.208.195:imap 86-40-60-183-dynamic.:10010 ESTABLISHED tcp 0 1 78.153.208.195:35563 news.avanport.pt:smtp SYN_SENT tcp 0 0 78.153.208.195:35559 vip-us-br-mx.terra.com:smtp TIME_WAIT tcp 0 0 78.153.208.195:35560 vip-us-br-mx.terra.com:smtp TIME_WAIT tcp 1 1 78.153.208.195:imaps 86-40-60-183-dynamic.:11647 CLOSING tcp 1 1 78.153.208.195:imaps 86-40-60-183-dynamic.:11645 CLOSING tcp 0 0 78.153.208.195:35562 mx.a.locaweb.com.br:smtp TIME_WAIT tcp 0 0 78.153.208.195:35561 mx.a.locaweb.com.br:smtp TIME_WAIT tcp 0 0 78.153.208.195:imap 86-41-8-64-dynamic.b-:49446 ESTABLISHED Does this indicate that his server may be acting as an open relay? Mail should only be outgoing from localhost. Apologies for my lack of knowledge but I don't work on linux in my day job. EDIT: Here's some output from /var/log/maillog which looks like it may be the result of spam. If it appears to be the case to others, where should I look next to investigate a root cause? I put the server IP through www.checkor.com and it came back clean. Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.721674 status: local 0/10 remote 9/20 Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.886182 delivery 74116: deferral: 200.147.36.15_does_not_like_recipient./Remote_host_said:_450_4.7.1_Client_host_rejected:_cannot_find_your_hostname,_[78.153.208.195]/Giving_up_on_200.147.36.15./ Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.886255 status: local 0/10 remote 8/20 Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.898266 delivery 74115: deferral: 187.31.0.11_does_not_like_recipient./Remote_host_said:_450_4.7.1_Client_host_rejected:_cannot_find_your_hostname,_[78.153.208.195]/Giving_up_on_187.31.0.11./ Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.898327 status: local 0/10 remote 7/20 Jun 29 00:02:14 vps-1001108-595 qmail: 1309302134.137833 delivery 74111: deferral: Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/ Jun 29 00:02:14 vps-1001108-595 qmail: 1309302134.137914 status: local 0/10 remote 6/20 Jun 29 00:02:19 vps-1001108-595 qmail: 1309302139.903536 delivery 74000: failure: 209.85.143.27_failed_after_I_sent_the_message./Remote_host_said:_550-5.7.1_[78.153.208.195_______1]_Our_system_has_detected_an_unusual_rate_of/550-5.7.1_unsolicited_mail_originating_from_your_IP_address._To_protect_our/550-5.7.1_users_from_spam,_mail_sent_from_your_IP_address_has_been_blocked./550-5.7.1_Please_visit_http://www.google.com/mail/help/bulk_mail.html_to_review/550_5.7.1_our_Bulk_Email_Senders_Guidelines._e25si1385223wes.137/ Jun 29 00:02:19 vps-1001108-595 qmail: 1309302139.903606 status: local 0/10 remote 5/20 Jun 29 00:02:19 vps-1001108-595 qmail-queue-handlers[15501]: Handlers Filter before-queue for qmail started ... EDIT #2 Here's the output of netstat -p with the imap and imaps lines removed. I also removed my own ssh session Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 1 78.153.208.195:40076 any-in-2015.1e100.net:smtp SYN_SENT 24096/qmail-remote. tcp 0 1 78.153.208.195:40077 any-in-2015.1e100.net:smtp SYN_SENT 24097/qmail-remote. udp 0 0 78.153.208.195:48515 125.64.11.158:4225 ESTABLISHED 20435/httpd

Read the article

Why is syslog so much slower than file IO?

- by ceving

I wrote a simple test program to measure the performance of the syslog function. This are the results of my test system: (Debian 6.0.2 with Linux 2.6.32-5-amd64) Test Case Calls Payload Duration Thoughput [] [MB] [s] [MB/s] -------------------- ---------- ---------- ---------- ---------- syslog 200000 10.00 7.81 1.28 syslog %s 200000 10.00 9.94 1.01 write /dev/null 200000 10.00 0.03 343.93 printf %s 200000 10.00 0.13 76.29 The test program did 200000 system calls writing 50 Bytes of data during each call. Why is Syslog more than ten times slower than file IO? This is the program I used to perform the test: #include <fcntl.h> #include <stdio.h> #include <string.h> #include <sys/stat.h> #include <sys/time.h> #include <sys/types.h> #include <syslog.h> #include <unistd.h> const int iter = 200000; const char msg[] = "123456789 123456789 123456789 123456789 123456789"; struct timeval t0; struct timeval t1; void start () { gettimeofday (&t0, (void*)0); } void stop () { gettimeofday (&t1, (void*)0); } void report (char *action) { double dt = (double)t1.tv_sec - (double)t0.tv_sec + 1e-6 * ((double)t1.tv_usec - (double)t0.tv_usec); double mb = 1e-6 * sizeof (msg) * iter; if (action == NULL) printf ("Test Case Calls Payload Duration Thoughput \n" " [] [MB] [s] [MB/s] \n" "-------------------- ---------- ---------- ---------- ----------\n"); else { if (strlen (action) > 20) action[20] = 0; printf ("%-20s %-10d %-10.2f %-10.2f %-10.2f\n", action, iter, mb, dt, mb / dt); } } void test_syslog () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, msg); stop (); closelog (); report ("syslog"); } void test_syslog_format () { int i; openlog ("test_syslog", LOG_PID | LOG_NDELAY, LOG_LOCAL0); start (); for (i = 0; i < iter; i++) syslog (LOG_DEBUG, "%s", msg); stop (); closelog (); report ("syslog %s"); } void test_write_devnull () { int i, fd; fd = open ("/dev/null", O_WRONLY); start (); for (i = 0; i < iter; i++) write (fd, msg, sizeof(msg)); stop (); close (fd); report ("write /dev/null"); } void test_printf () { int i; FILE *fp; fp = fopen ("/tmp/test_printf", "w"); start (); for (i = 0; i < iter; i++) fprintf (fp, "%s", msg); stop (); fclose (fp); report ("printf %s"); } int main (int argc, char **argv) { report (NULL); test_syslog (); test_syslog_format (); test_write_devnull (); test_printf (); }

Read the article

CPU/JVM/JBoss 7 slows down over time

- by lukas

I'm experiencing performance slow down on JBoss 7.1.1 Final. I wrote simple program that demostrates this behavior. I generate an array of 100,000 of random integers and run bubble sort on it. @Model public class PerformanceTest { public void proceed() { long now = System.currentTimeMillis(); int[] arr = new int[100000]; for(int i = 0; i < arr.length; i++) { arr[i] = (int) (Math.random() * 200000); } long now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to generate array"); now = System.currentTimeMillis(); bubbleSort(arr); now2 = System.currentTimeMillis(); System.out.println((now2 - now) + "ms took to bubblesort array"); } public void bubbleSort(int[] arr) { boolean swapped = true; int j = 0; int tmp; while (swapped) { swapped = false; j++; for (int i = 0; i < arr.length - j; i++) { if (arr[i] > arr[i + 1]) { tmp = arr[i]; arr[i] = arr[i + 1]; arr[i + 1] = tmp; swapped = true; } } } } } Just after I start the server, it takes approximately 22 seconds to run this code. After few days of JBoss 7.1.1. running, it takes 330 sec to run this code. In both cases, I launch the code when the CPU utilization is very low (say, 1%). Any ideas why? I run the server with following arguments: -Xms1280m -Xmx2048m -XX:MaxPermSize=2048m -Djava.net.preferIPv4Stack=true -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Djboss.modules.system.pkgs=org.jboss.byteman -Djava.awt.headless=true -Duser.timezone=UTC -Djboss.server.default.config=standalone-full.xml -Xrunjdwp:transport=dt_socket,address=8787,server=y,suspend=n I'm running it on Linux 2.6.32-279.11.1.el6.x86_64 with java version "1.7.0_07". It's within J2EE applicaiton. I use CDI so I have a button on JSF page that will call method "proceed" on @RequestScoped component PerformanceTest. I deploy this as separate war file and even if I undeploy other applications, it doesn't change the performance. It's a virtual machine that is sharing CPUs with another machine but that one doesn't consume anything. Here's yet another observation: when the server is after fresh start and I run the bubble sort, It utilizes 100% of one processor core. It never switches to another core or drops utilization below 95%. However after some time the server is running and I'm experiencing the performance problems, the method above is utilizing CPU core usually 100%, however I just found out from htop that this task is being switched very often to other cores. That is, at the beginning it's running on core #1, after say 2 seconds it's running on #5 then after say 2 seconds #8 etc. Furthermore, the utilization is not kept at 100% at the core but sometimes drops to 80% or even lower. For the server after fresh start, even though If I simulate a load, it never switches the task to another core.

Read the article

TCP stops sending weirdly.

- by Utoah

In case to find out the cause of TCP retransmits on my Linux (RHEL, kernel 2.6.18) servers connecting to the same switch. I had a client-server pair send "Hello" to each other every 200us and captured the packets with tcpdump on the client machine. The command I used to mimic client and server are: while [ 0 ]; do echo "Hello"; usleep 200; done | nc server 18510 while [ 0 ]; do echo "Hello"; usleep 200; done | nc -l 18510 When the server machine was busy serving some other requests, the client suffered from abrupt retransmits occasionally. But the output of tcpdump seemed irrational. 16:04:58.898970 IP server.18510 > client.34533: P 4531:4537(6) ack 3204 win 123 <nop,nop,timestamp 1923778643 3452833828> 16:04:58.901797 IP client.34533 > server.18510: P 3204:3210(6) ack 4537 win 33 <nop,nop,timestamp 3452833831 1923778643> 16:04:58.901855 IP server.18510 > client.34533: P 4537:4549(12) ack 3210 win 123 <nop,nop,timestamp 1923778646 3452833831> 16:04:58.903871 IP client.34533 > server.18510: P 3210:3216(6) ack 4549 win 33 <nop,nop,timestamp 3452833833 1923778646> 16:04:58.903950 IP server.18510 > client.34533: P 4549:4555(6) ack 3216 win 123 <nop,nop,timestamp 1923778648 3452833833> 16:04:58.905796 IP client.34533 > server.18510: P 3216:3222(6) ack 4555 win 33 <nop,nop,timestamp 3452833835 1923778648> 16:04:58.905860 IP server.18510 > client.34533: P 4555:4561(6) ack 3222 win 123 <nop,nop,timestamp 1923778650 3452833835> 16:04:58.908903 IP client.34533 > server.18510: P 3222:3228(6) ack 4561 win 33 <nop,nop,timestamp 3452833838 1923778650> 16:04:58.908966 IP server.18510 > client.34533: P 4561:4567(6) ack 3228 win 123 <nop,nop,timestamp 1923778653 3452833838> 16:04:58.911855 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452833841 1923778653> 16:04:59.112573 IP client.34533 > server.18510: P 3228:3234(6) ack 4567 win 33 <nop,nop,timestamp 3452834042 1923778653> 16:04:59.112648 IP server.18510 > client.34533: P 4567:5161(594) ack 3234 win 123 <nop,nop,timestamp 1923778857 3452834042> 16:04:59.112659 IP client.34533 > server.18510: P 3234:3672(438) ack 5161 win 35 <nop,nop,timestamp 3452834042 1923778857> 16:04:59.114427 IP server.18510 > client.34533: P 5161:5167(6) ack 3672 win 126 <nop,nop,timestamp 1923778858 3452834042> 16:04:59.114439 IP client.34533 > server.18510: P 3672:3678(6) ack 5167 win 35 <nop,nop,timestamp 3452834044 1923778858> 16:04:59.116435 IP server.18510 > client.34533: P 5167:5173(6) ack 3678 win 126 <nop,nop,timestamp 1923778860 3452834044> 16:04:59.116444 IP client.34533 > server.18510: P 3678:3684(6) ack 5173 win 35 <nop,nop,timestamp 3452834046 1923778860> Packet 3228:3234(6) from client was retransmitted due to ack timeout. What I could not understand was that the client machine did not send out any packets after the first 3228:3234(6) packets was sent. The server machine had advertised a window (scaled) large enough. The data transfer up to the retransmit was fine which meant no slow start should be in action. What can cause the client machine to stop sending until the packet timed out? BTW, I am unable to run tcpdump on the server machine.

Read the article

File Server - Storage configuration: RAID vs LVM vs ZFS something else... ?

- by privatehuff

We are a small company that does video editing, among other things, and need a place to keep backup copies of large media files and make it easy to share them. I've got a box set up with Ubuntu Server and 4 x 500 GB drives. They're currently set up with Samba as four shared folders that Mac/Windows workstations can see fine, but I want a better solution. There are two major reasons for this: 500 GB is not really big enough (some projects are larger) It is cumbersome to manage the current setup, because individual hard drives have different amounts of free space and duplicated data (for backup). It is confusing now and that will only get worse once there are multiple servers. ("the project is on sever2 in share4" etc) So, I need a way to combine hard drives in such a way as to avoid complete data loss with the failure of a single drive, and so users see only a single share on each server. I've done linux software RAID5 and had a bad experience with it, but would try it again. LVM looks ok but it seems like no one uses it. ZFS seems interesting but it is relatively "new". What is the most efficient and least risky way to to combine the hdd's that is convenient for my users? Edit: The Goal here is basically to create servers that contain an arbitrary number of hard drives but limit complexity from an end-user perspective. (i.e. they see one "folder" per server) Backing up data is not an issue here, but how each solution responds to hardware failure is a serious concern. That is why I lump RAID, LVM, ZFS, and who-knows-what together. My prior experience with RAID5 was also on an Ubuntu Server box and there was a tricky and unlikely set of circumstances that led to complete data loss. I could avoid that again but was left with a feeling that I was adding an unnecessary additional point of failure to the system. I haven't used RAID10 but we are on commodity hardware and the most data drives per box is pretty much fixed at 6. We've got a lot of 500 GB drives and 1.5 TB is pretty small. (Still an option for at least one server, however) I have no experience with LVM and have read conflicting reports on how it handles drive failure. If a (non-striped) LVM setup could handle a single drive failing and only loose whichever files had a portion stored on that drive (and stored most files on a single drive only) we could even live with that. But as long as I have to learn something totally new, I may as well go all the way to ZFS. Unlike LVM, though, I would also have to change my operating system (?) so that increases the distance between where I am and where I want to be. I used a version of solaris at uni and wouldn't mind it terribly, though. On the other end on the IT spectrum, I think I may also explore FreeNAS and/or Openfiler, but that doesn't really solve the how-to-combine-drives issue.

Search Results

Search found 27819 results on 1113 pages for 'linux intel'.

Page 320/1113 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327 | Next Page >

- by Tentresh

- by Ajay Chthri

- by Sean

- by morgant

- by XXL

- by Aleksandr Levchuk

- by morgant

- by Matt

- by user1694803

- by Yami

- by tommieb75

- by Glister

- by Charlie Somerville

- by SambaDrivesMeCrazy

- by Leandros

- by markus

- by tony

- by CyberShadow

- by Towndrunk

- by A G

- by Griffo

- by ceving

- by lukas

- by Utoah

- by privatehuff

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327 | Next Page >