Search Results

Search found 10597 results on 424 pages for 'dynamic attributes'.

Page 322/424 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

  • Unable to find good parameters for behavior of a puck in Farseer

    - by Krumelur
    EDIT: I have tried all kinds of variations now. The last one was to adjust the linear velocity in each step: newVel = oldVel * 0.9f - all of this including your proposals kind of work, however in the end if the velocity is little enough, the puck sticks to the wall and slides either vertically or horizontally. I can't get rid of this behavior. I want it to bounce, no matter how slow it is. Retitution is 1 for all objects, Friction is 0 for all. There is no gravity. What am I possibly doing wrong? In my battle to learn and understand Farseer I'm trying to setup a simple Air Hockey like table with a puck on it. The table's border body is made up from: Vertices aBorders = new Vertices( 4 ); aBorders.Add( new Vector2( -fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, -fHalfHeight ) ); aBorders.Add( new Vector2( -fHalfWidth, -fHalfHeight ) ); FixtureFactory.AttachLoopShape( aBorders, this ); this.CollisionCategories = Category.All; this.CollidesWith = Category.All; this.Position = Vector2.Zero; this.Restitution = 1f; this.Friction = 0f; The puck body is defined with: FixtureFactory.AttachCircle( DIAMETER_PHYSIC_UNITS / 2f, 0.5f, this ); this.Restitution = 0.1f; this.Friction = 0.5f; this.BodyType = FarseerPhysics.Dynamics.BodyType.Dynamic; this.LinearDamping = 0.5f; this.Mass = 0.2f; I'm applying a linear force to the puck: this.oPuck.ApplyLinearImpulse( new Vector2( 1f, 1f ) ); The problem is that the puck and the walls appear to be sticky. This means that the puck's velocity drops to zero to quickly below a certain velocity. The puck gets reflected by the walls a couple of times and then just sticks to the left wall and continues sliding downwards the left wall. This looks very unrealistic. What I'm really looking for is that a puck-wall-collision does slow down the puck only a tiny little bit. After tweaking all values left and right I was wondering if I'm doing something wrong. Maybe some expert can comment on the parameters?

    Read the article

  • Perfect is the enemy of “Good Enough”

    - by Daniel Moth
    This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

    - by XaviGG
    I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

    Read the article

  • New RUP Patch for iSupplier Portal, Sourcing and Supplier Lifecycle Management (SLM)

    - by LuciaC
    Just released - the 12.1.3 Rollup (RUP) Patch 17525552:R12.PRC_PF.B for iSupplier Portal, Sourcing and Supplier Lifecycle Management (SLM). Who should apply this patch? Anyone that is on Release 12.1.3 and is using  iSupplier Portal, Sourcing or Supplier Lifecycle Management (SLM) functionality. The following areas have had major fixes: Prospective Supplier Guided Navigation: The train-navigation is introduced for prospective supplier registration so that prospective suppliers can see all steps needed to successfully register themselves. Supplier Registration Workflow Enhancement: With this release, provided the Approval Management Engine (AME) action required notifications for supplier approval, so that all workflow related features can be enabled. Vacation rules can be set, approvals can be forwarded and more information can be requested through the notification itself.  Additionally AME parallel Approval support for Supplier Registration approvals has been added. Reinstate Supplier Request: Allow buyer to reopen/reinstate the rejected supplier. Supplier is able to access their previously rejected registration again and make changes and resubmit request. Contact Address Association: The prospective supplier is allowed to associate addresses with contacts (including Primary) during the prospective supplier registration process. Primary Contact Enhancement: The prospective supplier can be registered without creating a user account for the primary contact. Mandatory Attributes: In the negotiation requirement creation page, the lookup meaning of 'Internal' has been changed to 'Internal Optional', and a new lookup value with meaning as 'Internal Required' has been added. The values available in the 'Type' dropdown now are Display Only, Internal Optional, Internal Required, Supplier Optional and Supplier Required.  So now during supplier evaluations, internal user response can be set as mandatory by using Internal Required type during requirement creation. Notifications to Supplier:  When the supplier saves and submits their supplier registration request, then a notification with a registration status page link will be sent for further access.  When the buyer approves, rejects or returns the request, the supplier will be notified in an email with the current status. There are also 10 major enhancements included in this RUP. For information about this RUP; including, the fixes and enhancements included, how to access and apply the patch, performing an impact analysis on your system, and testing recommendations, see Doc ID 1591198.1.  Don’t delay apply the patch today!

    Read the article

  • Inherit one instance variable from the global scope

    - by Julian
    I'm using Curses to create a command line GUI with Ruby. Everything's going well, but I have hit a slight snag. I don't think Curses knowledge (esoteric to be fair) is required to answer this question, just Ruby concepts such as objects and inheritance. I'm going to explain my problem now, but if I'm banging on, just look at the example below. Basically, every Window instance needs to have .close called on it in order to close it. Some Window instances have other Windows associated with it. When closing a Window instance, I want to be able to close all of the other Window instances associated with it at the same time. Because associated Windows are generated in a logical fashion, (I append the name with a number: instance_variable_set(self + integer, Window.new(10,10,10,10)) ), it's easy to target generated windows, because methods can anticipate what assosiated windows will be called, (I can recreate the instance variable name from scratch, and almost query it: instance_variable_get(self + integer). I have a delete method that handles this. If the delete method is just a normal, global method (called like this: delete_window(@win543) then everything works perfectly. However, if the delete method is an instance method, which it needs to be in-order to use the self keyword, it doesn't work for a very clear reason; it can 'query' the correct instance variable perfectly well (instance_variable_get(self + integer)), however, because it's an instance method, the global instances aren't scoped to it! Now, one way around this would obviously be to simply make a global method like this: delete_window(@win543). But I have attributes associated with my window instances, and it all works very elegantly. This is very simplified, but it literally translates the problem exactly: class Dog def speak woof end end def woof if @dog_generic == nil puts "@dog_generic isn't scoped when .woof is called from a class method!\n" else puts "@dog_generic is scoped when .woof is called from the global scope. See:\n" + @dog_generic end end @dog_generic = "Woof!" lassie = Dog.new lassie.speak #=> @dog_generic isn't scoped when .woof is called from an instance method!\n woof #=> @dog_generic is scoped when .woof is called from the global scope. See:\nWoof! TL/DR: I need lassie.speak to return this string: "@dog_generic is scoped when .woof is called from the global scope. See:\nWoof!" @dog_generic must remain as an insance variable. The use of Globals or Constants is not acceptable. Could woof inherit from the Global scope? Maybe some sort of keyword: def woof < global # This 'code' is just to conceptualise what I want to do, don't take offence! end Is there some way the .woof method could 'pull in' @dog_generic from the global scope? Will @dog_generic have to be passed in as a parameter?

    Read the article

  • A solution for a PHP website without a framework

    - by lortabac
    One of our customers asked us to add some dynamic functionality to an existent website, made of several static HTML pages. We normally work with an MVC framework (mostly CodeIgniter), but in this case moving everything to a framework would require too much time. Since it is not a big project, not having the full functionality of a framework is not a problem. But the question is how to keep code clean. The solution I came up with is to divide code in libraries (the application's API) and models. So inside HTML there will only be API calls, and readability will not be sacrificed. I implemented this with a sort of static Registry (sorry if I'm wrong, I am not a design pattern expert): <?php class Custom_framework { //Global database instance private static $db; //Registered models private static $models = array(); //Registered libraries private static $libraries = array(); //Returns a database class instance static public function get_db(){ if(isset(self::$db)){ //If instance exists, returns it return self::$db; } else { //If instance doesn't exists, creates it self::$db = new DB; return self::$db; } } //Returns a model instance static public function get_model($model_name){ if(isset(self::$models[$model_name])){ //If instance exists, returns it return self::$models[$model_name]; } else { //If instance doesn't exists, creates it if(is_file(ROOT_DIR . 'application/models/' . $model_name . '.php')){ include_once ROOT_DIR . 'application/models/' . $model_name . '.php'; self::$models[$model_name] = new $model_name; return self::$models[$model_name]; } else { return FALSE; } } } //Returns a library instance static public function get_library($library_name){ if(isset(self::$libraries[$library_name])){ //If instance exists, returns it return self::$libraries[$library_name]; } else { //If instance doesn't exists, creates it if(is_file(ROOT_DIR . 'application/libraries/' . $library_name . '.php')){ include_once ROOT_DIR . 'application/libraries/' . $library_name . '.php'; self::$libraries[$library_name] = new $library_name; return self::$libraries[$library_name]; } else { return FALSE; } } } } Inside HTML, API methods are accessed like this: <?php echo Custom_framework::get_library('My_library')->my_method(); ?> It looks to me as a practical solution. But I wonder what its drawbacks are, and what the possible alternatives.

    Read the article

  • Adding JavaScript to your code dependent upon conditions

    - by DavidMadden
    You might be in an environment where you code is source controlled and where you might have build options to different environments.  I recently encountered this where the same code, built on different configurations, would have the website at a different URL.  If you are working with ASP.NET as I am you will have to do something a bit crazy but worth while.  If someone has a more efficient solution please share. Here is what I came up with to make sure the client side script was placed into the HEAD element for the Google Analytics script.  GA wants to be the last in the HEAD element so if you are doing others in the Page_Load then you should do theirs last. The settings object below is an instance of a class that holds information I collection.  You could read from different sources depending on where you stored your unique ID for Google Analytics. *** This has been formatted to fit this screen. *** if (!IsPostBack) { if (settings.GoogleAnalyticsID != null || settings.GoogleAnalyticsID != string.Empty) { string str = @"//<!CDATA[ var _gaq = _gaq || []; _gaq.push(['_setAccount', '"  + settings.GoogleAnalyticsID + "']); _gaq.push(['_trackPageview']);  (function () {  var ga = document.createElement('script');  ga.type = 'text/javascript';  ga.async = true;  ga.src = ('https:' == document.location.protocol  ? 'https://ssl' :  'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0];  s.parentNode.insertBefore(ga, s);})();"; System.Web.UI.HtmlControls.HtmlGenericControl si =  new System.Web.UI.HtmlControls.HtmlGenericControl(); si.TagName = "script"; si.Attributes.Add("type", @"text/javascript"); si.InnerHtml = sb.ToString(); this.Page.Header.Controls.Add(si); } } The code above will prevent the code from executing if it is a PostBack and then if the ID was not able to be read or something caused the settings to be lost by accident. If you have larger function to declare, you can use a StringBuilder to separate the lines. This is the most compact I wished to go and manage readability.

    Read the article

  • Practices for domain models in Javascript (with frameworks)

    - by AndyBursh
    This is a question I've to-and-fro'd with for a while, and searched for and found nothing on: what're the accepted practices surrounding duplicating domain models in Javascript for a web application, when using a framework like Backbone or Knockout? Given a web application of a non-trivial size with a set of domain models on the server side, should we duplicate these models in the web application (see the example at the bottom)? Or should we use the dynamic nature to load these models from the server? To my mind, the arguments for duplicating the models are in easing validation of fields, ensuring that fields that expected to be present are in fact present etc. My approach is to treat the client-side code like an almost separate application, doing trivial things itself and only relying on the server for data and complex operations (which require data the client-side doesn't have). I think treating the client-side code like this is akin to separation between entities from an ORM and the models used with the view in the UI layer: they may have the same fields and relate to the same domain concept, but they're distinct things. On the other hand, it seems to me that duplicating these models on the server side is a clear violation of DRY and likely to lead to differing results on the client- and server-side (where one piece gets updated but the other doesn't). To avoid this violation of DRY we can simply use Javascripts dynamism to get the field names and data from the server as and when they're neeed. So: are there any accepted guidelines around when (and when not) to repeat yourself in these situations? Or this a purely subjective thing, based on the project and developer(s)? Example Server-side model class M { int A DateTime B int C int D = (A*C) double SomeComplexCalculation = ServiceLayer.Call(); } Client-side model function M(){ this.A = ko.observable(); this.B = ko.observable(); this.C = ko.observable(); this.D = function() { return A() * C(); } this.SomeComplexCalculation = ko.observalbe(); return this; }l M.GetComplexValue = function(){ this.SomeComplexCalculation(Ajax.CallBackToServer()); }; I realise this question is quite similar to this one, but I think this is more about almost wholly untying the web application from the server, where that question is about doing this only in the case of complex calculation.

    Read the article

  • How to implement a component based system for items in a web game.

    - by Landstander
    Reading several other questions and answers on using a component based system to define items I want to use one for the items and spells in a web game written in PHP. I'm just stuck on the implementation. I'm going to use a DB schema suggested in this series (part 5 describes the schema); http://t-machine.org/index.php/2007/09/03/entity-systems-are-the-future-of-mmog-development-part-1/ This means I'll have an items table with generic item properties, a table listing all of the components for an item and finally records in each component table used to make up the item. Assuming I can select the first two together in a single query, I'm still going to do N queries for each component type. I'm kind of fine with this because I can cache the data into memcache and check there first before doing any queries. I'll need to build up the items on every request they are used in so the implementation needs to be on the lean side even if they're pulled from memcache. But right there is where I feel confident about implementing a component system for my items ends. I figure I'd need to bring attributes and behaviors into the container from each component it uses. I'm just not sure how to do that effectively and not end up writing a lot of specialized code to deal with each component. For example an AttackComponent might need to know how to filter targets inside of a battle context and also maybe provide an attack behavior. That same item might also have a UsableComponent which allows the item to be used and apply some effect onto a different set of targets filtered differently from the same battle context. Then not every part of an item is an active part, an AttributeBonusComponent might need to only kick in when the item is in an equipped state or when displaying the item details page. Ultimately, how should I bring all of the components together into the container so when I use an item as a weapon I get the correct list of targets? Know when a weapon can also be used as an item? Or to apply the bonuses the item provides to a character object? I feel like I've gone too far down the rabbit hole and I can't grasp onto the simple solution in front of me. (If that makes any sense at all.) Likewise if I were to implement the best answer from here I feel like I'd have a lot of the same questions. How to model multiple "uses" (e.g. weapon) for usable-inventory/object/items (e.g. katana) within a relational database.

    Read the article

  • Working the Chart Percentages

    - by Tim Dexter
    Charting in BIP is such fun, well sometimes it is. Not so much today, at least not for Ron in San Diego. He needed a horizontal bar chart showing values plotted for various test areas with value labels at the end of the bars. Simple enough right? The wrinkle, they were percentage values so he needed to see '56%' not '56'! Still, it should be simple enough but the percentage formatting has a requirement for your values to be in a decimal format i.e. 0.56 not 56.0. 56.0 gets formatted as 5600%. OK, so either pull the values out as decimals or use the div function to divide the values in the chart by 100 e.g. <xsl:value-of select="myval div 100)" /> Now I can use the following the chart XML to format the percentages as I need them:   <Graph ... > ... <MarkerText visible="true"> <Y1ViewFormat> <ViewFormat numberType="NUMTYPE_PERCENT" decimalDigit="0" numberTypeUsed="true" leadingZeroUsed="true" decimalDigitUsed="true"/> </Y1ViewFormat> </MarkerText> ... </Graph>   That gets me the values shown the way I want but the auto axis formatting gets me from 0 >> 1. I now need to go in and add the formatting for the axis too.   <Graph ...> ... <Y1Axis axisMinAutoScaled="false" axisMinValue="0.0" axisMaxAutoScaled="false" axisMaxValue="1.0" majorTickStepAutomatic="true"> <ViewFormat numberType="NUMTYPE_PERCENT" decimalDigit="0" scaleFactor="SCALEFACTOR_NONE" numberTypeUsed="true" leadingZeroUsed="true" decimalDigitUsed="true" scaleFactorUsed="true"/> </Y1Axis>   Now I have a chart that's showing the percentage values and formatting axis scale correctly for me too. You can of course mess with the attributes above to get more decimal points on your labels, etc. Happy Charting!

    Read the article

  • Developing web sites that imitate desktop apps. How to fight that paradigm? [closed]

    - by user1598390
    Supposse there's a company where web sites/apps are designed to resemble desktop apps. They struggle to add: Splash screens Drop-down menus Tab-pages Pages that don't grow downward with content, context is inside scrollable area so page is of a fixed size, as if resembling the one-screen limitation of desktop apps. Modal windows, pop-ups, etc. Tree views Absolutely no access to content unless you login-first, even with non-sensitive content. After splash screen desapears, you are presented with a login screen. No links - just simulated buttons. Fixed page-size. Cannot open a linked in other tab Print button that prints directly ( not showing printable page so the user can't print via the browser's print command ) Progress bars for loading content even when the browser indicates it with its own animation Fonts and color amulate a desktop app made with Visual Basic, PowerBuilder etc. Every app seems almost as if were made in Visual Basic. They reject this elements: Breadcrumbs Good old underlined links Generated/dynamic navigation, usage-based suggestions Ability to open links in multiple tabs Pagination Printable pages Ability to produce a URL you can save or share that links to an item, like when you send someone the link to an especific StackExchange question. The only URL is the main one. Back button To achieve this, tons of javascript code is needed. Lots and lots of Javascript and Ajax code for things not related with the business but with the necessity to hide/show that button, refresh this listbox, grey-out that label, etc. The coplexity generated by forcing one paradigm into another means most lines of code are dedicated to maintain the illusion of a desktop app. What is the best way to change this mindset, and make them embrace the web, and start producing modern, web apps instead of desktop imitations ? EDIT: These sites are intranet sites. Users hate these apps. They constantly whine about them, but they have to use them to do their daily work. These sites are in-house solutions, the end-users have no choice but to use them. They are a "captive audience". Also, substitution will not happen because of high costs. But at least if that mindset is changed, new developments would be more web-like.

    Read the article

  • what would be a good way to implement/render a 2d tiled map for a browser game?

    - by jj_
    I've made this little rpg ruby game I did while learning and now I'd like to make it into a browser game. I've already set up Sinatra framework to serve it, so what I am looking for, before everything else, is a way to represent the game map in browser (location attributes are stored in db). A new map is randomly generated by code for each new game at each game start. For now forget db, and let's say a map (say 100x100 "squares") is stored as a tridimensional array. (x,y, ...) Last "dimension" of array stores who & what is at that map cell: a player, a building, whatever. So all I have to do is render those "squares" or array cells to a 2d tiled map in the browser. The map does not need to refresh or be dynamically fetched as you scroll it, (at least at this stage of development) but, a technology which would allow me to do so in future would be a good reason for choosing it. Things that I thought of: html tables, html5 canvas, some js framework which is designed exactly with this purpose (which I do not know of = please advice). Yes I know about gamequery-js framework, but I've never used it, and I don't know if it's going to slow down everything down to inusability as I'm adding new features (scrolling, ajax). I really don't know of any other alternatives.. maybe there are lighter approaches? Easier or more minimalistic ways ? More targeted js framework which is the right tool for the job? Maybe just some html canvas code, or even simple image maps, or images with absolute positioning will be enough? The thing is I'd like to start simple, and then gradually make it better, so, as I said before, I'd prefer something that will give me room for improvement or is headed toward new web tendencies but which will also give me a bit of gratification in the beginning :) So.. advices are needed! And appreciated! :) Thanks p.s. Flash is excluded because I don't like it.

    Read the article

  • Is there a factory pattern to prevent multiple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquely define what the object is (what node, what edge etc), and the others that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methods, so all these objects act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approach which accepts a Builder object and constructs the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquely defines the type of object (this is node A to node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows its state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overriding of serialization methods to make it work (ensure that when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in its place), as well as using a weakHashMap as if it was a weakHashSet to know whether an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to its own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state that is different than my memory; to tell my memory when its own state is inconsistent. I believe this is possible despite their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect that I'm posting).

    Read the article

  • is a factory pattern to prevent multuple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquly define what the object is (what node, what edge etc), and the oens that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methdos, so these objects all act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approch which accepts a Builder object and construct the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquly defines the type of object (this is node A nto node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows it's state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overiding of serlization methods to make it work (ensure when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in it's place), as well as using a weakHashMap as if it was a weakHashSet to know rather an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to it's own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state taht is different then my memory; to tell my memory when it's own state is inconsistent. I believe this is possible despit their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect I'm posting).

    Read the article

  • Write a program using 3 threads, one prints 10 'A's and the second prints 'B's and the third prints 10 'C's with synchrornization

    - by user132967
    Iam try to implement this questions using threads and mutex this is my code : include include include include include define Num_thread 3 pthread_mutex_t lett[Num_thread]; void Sleep_rand(double max) { struct timespec delai; delai.tv_sec=max; delai.tv_nsec=0; nanosleep(&delai,NULL); } void *Print_Sequence(); int main() { int i; pthread_t tid[Num_thread];// this is threads identifier for(i=0;i<Num_thread;i++) pthread_mutex_init(&lett[i],0); for(i=0;i<Num_thread;i++) { printf("i=%d\n",i); /* create the threads / pthread_create(&tid[i], / This variable will have the thread is after successful creation / NULL, / send the thread attributes / Print_Sequence, / the function the thread will run / &i/ send the parameter's address to the function */); } /* Wait till threads are complete and join before main continues */ for (i = 0; i pthread_join(tid[i], NULL); } return 0; } /* The thread will begin control in this function */ void Print_Sequence(void param) { int i,j=(int)param; printf("j=%d\n",(*j)); int max; pthread_mutex_lock(&lett[0]); pthread_mutex_lock(&lett[1]); for (i = 1; i <= 10; i++) { max=(int) (8*rand()/(RAND_MAX+1.0)); Sleep_rand( max); printf("A"); } pthread_mutex_unlock(&lett[0]); pthread_mutex_lock(&lett[2]); for (i = 1; i <= 10; i++) { max=(int) (2*rand()/(RAND_MAX+1.0)); Sleep_rand( max); printf("B"); } for (i = 1; i <= 10; i++) { max=(int) (15*rand()/(RAND_MAX+1.0)); Sleep_rand( max); printf("C"); } pthread_mutex_unlock(&lett[1]); pthread_mutex_unlock(&lett[2]); pthread_exit(0); } and the o/p is like : AAAAAAAAAABBBBBBBBBBCCCCCCCCCCAAAAAAAAAABBBBBBBBBBCCCCCCCCCCAAAAAAAAAABBBBBBBBBBCCCCCCCCCC COULD ANYONE PLEASE EXPLAIN WHAT IS THE WRONG WITH CODE ??

    Read the article

  • Get Proactive With AutoVue Support!

    - by GrahamOracle
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} I’m pleased to announce the AutoVue “Get Proactive” page within the My Oracle Support portal. This new dynamic document links to valuable resources for AutoVue users, administrators, and integrators – Not only to remain up-to-date on Support and technical topics, but also to enhance your knowledge in planning for upgrade and maintenance activities for your AutoVue products. To access the AutoVue Get Proactive page, log into the MOS portal, search for note number 432.1 in the search field at the top-right, and once in the document select “Agile and AutoVue” from the dropdown (as shown in the following screenshot): The Get Proactive page is a working document, and we plan to include new resources as they become available. Therefore make sure to bookmark the document, and if you have any suggestions please post them using the ‘Add Comment’ feature within the document, or through the AutoVue Community. Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • Development Approach: User Interface In or Domain Model Out?

    - by Berin Loritsch
    While I've never delivered anything using Smalltalk, my brief time playing with it has definitely left its mark. The only way to describe the experience is MVC the way it was meant to be. Essentially, all the heavy lifting for your application is done in the business objects (or domain model if you are so inclined). The standard controls are bound to the business objects in some way. For example, a text box is mapped to an object's field (the field itself is an object so it's easy to do). A button would mapped to a method. This is all done with a very simple and natural API. We don't have to think about binding objects, etc. It just works. Yet, in many newer languages and APIs you are forced to think from the outside in. First with C++ and MFC, and now with C# and WPF, Microsoft has gotten it's developer world hooked on GUI builders where you build your application by implementing event handlers. Java Swing development isn't so different, only you are writing the code to instantiate the controls on the form yourself. For some projects, there may never even be a domain model--just event handlers. I've been in and around this model for most of my carreer. Each way forces you to think differently. With the Smalltalk approach, your domain is smart while your GUI is dumb. With the default VisualStudio approach, your GUI is smart while your domain model (if it exists) is rather anemic. Many developers that I work with see value in the Smalltalk approach, and try to shoehorn that approach into the VisualStudio environment. WPF has some dynamic binding features that makes it possible; but there are limitations. Inevitably some code that belongs in the domain model ends up in the GUI classes. So, which way do you design/develop your code? Why? GUI first. User interaction is paramount. Domain first. I need to make sure the system is correct before we put a UI on it. There's pros and cons for either approach. Domain model fits in there with crystal cathedrals and pie in the sky. GUI fits in there with quick and dirty (sometimes really dirty). And for an added bonus: How do you make sure the code is maintainable?

    Read the article

  • IndexOutOfRangeException on World.Step after enabling/disabling a Farseer physics body?

    - by WilHall
    Earlier, I posted a question asking how to swap fixtures on the fly in a 2D side-scroller using Farseer Physics Engine. The ultimate goal being that the player's physical body changes when the player is in different states (I.e. standing, walking, jumping, etc). After reading this answer, I changed my approach to the following: Create a physical body for each state when the player is loaded Save those bodies and their corresponding states in parallel lists Swap those physical bodies out when the player state changes (which causes an exception, see below) The following is my function to change states and swap physical bodies: new protected void SetState(object nState) { //If mBody == null, the player is being loaded for the first time if (mBody == null) { mBody = mBodies[mStates.IndexOf(nState)]; mBody.Enabled = true; } else { //Get the body for the given state Body nBody = mBodies[mStates.IndexOf(nState)]; //Enable the new body nBody.Enabled = true; //Disable the current body mBody.Enabled = false; //Copy the current body's attributes to the new one nBody.SetTransform(mBody.Position, mBody.Rotation); nBody.LinearVelocity = mBody.LinearVelocity; nBody.AngularVelocity = mBody.AngularVelocity; mBody = nBody; } base.SetState(nState); } Using the above method causes an IndexOutOfRangeException when calling World.Step: mWorld.Step(Math.Min((float)nGameTime.ElapsedGameTime.TotalSeconds, (1f / 30f))); I found that the problem is related to changing the .Enabled setting on a body. I tried the above function without setting .Enabled, and there was no error thrown. Turning on the debug views, I saw that the bodies were updating positions/rotations/etc properly when the state was changes, but since they were all enabled, they were just colliding wildly with each other. Does Enabling/Disabling a body remove it from the world's body list, which then causes the error because the list is shorter than expected? Update: For such a straightforward issue, I feel this question has not received enough attention. Has anyone else experienced this? Would anyone try a quick test case? I know this issue can be sidestepped - I.e. by not disabling a body during the simulation - but it seems strange that this issue would exist in the first place, especially when I see no mention of it in the documentation for farseer or box2d. I can't find any cases of the issue online where things are more or less kosher, like in my case. Any leads on this would be helpful.

    Read the article

  • How to set up an rsync backup to Ubuntu securely?

    - by ws_e_c421
    I have been following various other tutorials and blog posts on setting up a Ubuntu machine as a backup "server" (I'll call it a server, but it's just running Ubuntu desktop) that I push new files to with rsync. Right now, I am able to connect to the server from my laptop using rsync and ssh with an RSA key that I created and no password prompt when my laptop is connected to my home router that the server is also connected to. I would like to be able to send files from my laptop when I am away from home. Some of the tutorials I have looked at had some brief suggestions about security, but they didn't focus on them. What do I need to do to let my laptop with send files to the server without making it too easy for someone else to hack into the server? Here is what I have done so far: Ran ssh-keygen and ssh-copy-id to create a key pair for my laptop and server. Created a script on the server to write its public ip address to a file, encrypt the file, and upload to an ftp server I have access to (I know I could sign up for a free dynamic DNS account for this part, but since I have the ftp account and don't really need to make the ip publicly accessible I thought this might be better). Here are the things I have seen suggested: Port forwarding: I know I need to assign the server a fixed ip address on the router and then tell the router to forward a port or ports to it. Should I just use port 22 or choose a random port and use that? Turn on the firewall (ufw). Will this do anything, or will my router already block everything except the port I want? Run fail2ban. Are all of those things worth doing? Should I do anything else? Could I set up the server to allow connections with the RSA key only (and not with a password), or will fail2ban provide enough protection against malicious connection attempts? Is it possible to limit the kinds of connections the server allows (e.g. only ssh)? I hope this isn't too many questions. I am pretty new to Ubuntu (but use the shell and bash scripts on OSX). I don't need to have the absolute most secure set up. I'd like something that is reasonably secure without being so complicated that it could easily break in a way that would be hard for me to fix.

    Read the article

  • ?Pick-Up???????WebLogic Server JDBC???·???????(10.3.4)|WebLogic Channel|??????

    - by ???02
    Oracle WebLogic Server JDBC???·???(10.3.4)?????????????????????????????????????????????????????    ¦Oracle RAC???????    ¦JDBC????????    ¦???·???·?????    ¦????????????    ¦??????????·?????    ¦????·??????????????Oracle RAC??????????????????????·???·????GridLink???·????????Oracle RAC?????????????    ¦ ???WebLogic Server???·????Oracle RAC????????????????Oracle RAC?????????????????????????    ¦Oracle RAC?????????????????????????          o????????????(FCF)          o????????·??????(RCLB)          o????????????    ¦?????·?????????XA??????????????????Oracle RAC???????????????????????????Oracle RAC???????????????????????    ¦Oracle????????·?????(SCAN)??????????  ??????????GridLink???·??????????·????·???????ONS????·??????SCAN?????????Oracle RAC??????????????????????????????????????????SCAN???????GridLink???·?????Oracle RAC???????????????????????????????????GridLink???·?????????????????JDBC????????JDBC??????WebLogic Server????????????·???????????????????·????GridLink???·??????????·???·?????????????????·?????????? > ????·??????????????????????????·???·????????·???·?????(???)????????????????????????·???·???????????????????????????????????·?????????????????????????????·???·?????????????????????????·??????????>????·???·????????????????????????????????????????????????Oracle???????????????·???·?????????????????????????????????????    ¦Oracle Net Sdp    ¦Oracle Dynamic Buffering    ¦Oracle Reduced Data Copies????????????????????????????????????????????????????Oracle?????????????????????????????·??????????????????·??????????????????·???????????????????????????·????????????????????·????????????????????????????·??????????????????????????????????????????WebLogic Server??????·????????????????????????????????????????????????????????????Oracle WebLogic Server MBean????????KeepConnAfterLocalTx???????????????¦????????¦Oracle Fusion Middleware Oracle WebLogic Server JDBC???·?????????JDBC API???????????????????????????????????????????????????????????????    *WebLogic JDBC???????    *JDBC???·??????    *GridLink???·??????    *JDBC???·???·??????    *WebLogic Server??Oracle RAC????    *WebLogic Server??JDBC????????    *WebLogic JDBC?????????    *WebLogic JDBC???????¦Oracle WebLogic Server JDBC????????  - Programming JDBC(10.3.4/??)  - Oracle WebLogic Server JDBC????????(10.3.3)     (??)10.3.4???????????????????????????    WebLogic Server????(10.3.4)WebLogic Server??JDBC API??????????????????¦Oracle WebLogic Server???4 JDBC????WebLogic ???4 JDBC?????????????????????¦Oracle WebLogic Server???????????WebLogic Server??????????????????¦Oracle WebLogic Server??????????????????????????WebLogic Server?????????????????????????????·??????

    Read the article

  • PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

    - by athspk
    I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

    Read the article

  • Cannot reactivate RAID-5 volume: The size of the plex member is invalid

    - by Ian Boyd
    We had a 3-drive Windows Server 2008 R2 RAID-5 fail (operating in redundancy mode): WDC 1 TB WDC 1 TB WDC 1 TB We removed the failed hard drive, and put a WDC 1 TB drive (that we had standing by) into the machine. When launched, Disk Manager, asked permission to "initialize" the disk as either: Master Boot Record (MBR) Guid Partition Table (GPT) We initialized the disk as GPT, converted it to dynamic, and tried to use the Repair Volume command - except it was greyed out. (which is a terrifying thing on a failed production server hosting 3 virtual servers) i tried from the diskpart command line tool. First we look for our RAID-5 volume that is in Failed Rd mode: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 E VMs (Raid5) NTFS RAID-5 1863 GB Failed Rd Volume 1 D DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C NTFS Partition 1862 GB Healthy Boot There, Volume 0. Make that our active context: DISKPART> select volume 0 Volume 0 is the selected volume. Now we need to find the disk we will be repairing the volume with: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 931 GB 931 GB * Disk 2 Online 1863 GB 0 B Disk 3 Online 931 GB 0 B * Disk M0 Missing 0 B 0 B * The disk with 931 GB free, Disk 1. Now we just need to repair the volume: DISKPART> repair disk=1 Virtual Disk Service error: The size of the plex member is invalid.

    Read the article

  • Dell VRTX - slow cluster shared storage

    - by NorbyTheGeek
    I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

    Read the article

  • "0x80004005: Unspecified error" when renaming folders in Windows 7

    - by Michael Steele
    Setup I've just installed Windows 7 Ultimate 64bit. The operating system is installed on an 80GB Intel X-25M. I have a secondary 500GB Barracuda 7200.12 to be used for storage. This second drive is mounted as 'G'. Problem I'm getting an error whenever I try to rename a folder within this drive. The error says: An unexpected error is keeping you from renaming the folder. If you continue to receive this error, you can use the error code to search for help with this problem. Error 0x80004005: Unspecified error Clicking the "Try Again" button gets past the error, and correctly renames the folder. If I create a folder and leave it's name as "New Folder", then I don't see an error. I'm also able to manipulate files however I want without seeing an error. Things I've Tried Changing permissions on the drive Reformatting the drive. I've tried using both a "Basic" and "Dynamic" partition table. Checking the drive for errors using Microsoft tools Things I've Not Yet Tried When I first installed Windows I was given a choice between three types of partitions to use. I no longer remember what the choices were or what I selected. One was a GUID partition table, one was a traditional MBR, and I can't remember the third option.

    Read the article

  • Transfer all 1&1 web and e-mail services to own Synology NAS using No-IP for DDNS

    - by Neo
    I have a domain x-treem.net. The registrar is DomainDiscover and I have a hosting package with 1&1 which includes web and e-mail. I also have an additional package with 1&1 - Microsoft Exchange which centralises all my e-mails, tasks, contacts, notes, etc. and I connect to it with my PC (Outlook) and my Android phone. I have just purchased a Synology NAS (DS213) and I can see I can run a web server (Web Station), e-mail server (Mail Server) on it amongst other things. I am behind a dynamic IP. So, I'm looking to get some clarification on what I must do to consolidate my services and make use of my NAS to do as much as possible and save third-party hosting costs. My registrar specifies nameservers as NS45.1AND1.CO.UK and NS46.1AND1.CO.UK. The MX record is mx00.1and1.co.uk and mx01.1and1.co.uk. I'm aware of the concept of DDNS and I am looking at using No-IP.com for this. This is where I need clarification. If I registered with the No-IP paid service and pointed my registrar to No-IP's nameservers, and used the DDNS support on my NAS (which supports No-IP), then any requests to x-treem.net would go to my NAS. Is that correct? Therefore, web requests would hit the web server on my NAS, and e-mails would hit the mail server on my NAS? So, given all of the above, I can then drop 1&1 completely and use my NAS for everything. I use MySQL, phpMyAdmin, phpBB on 1&1 all of which the Synology NAS appears to support in its available packages. As for Microsoft Exchange, Synology offers Zafara which appears to be a drop-in replacement for Exchange. Am I on the right track here, or is there anything I am missing?

    Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >