Search Results

Search found 27248 results on 1090 pages for 'table adapter'.

Page 322/1090 | < Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >

  • 8Gb Fiber Channcel HBA vs. 10 Gb SPF+ Converged HBA

    - by Hossein Aarabi
    I am putting a Dell server together, more specifically R720. I have to select the correct Host Bus Adapter. This HBA on R710 will connect to a storage device. I am confused between these two: QLogic 2562, Dual Port 8Gb Optical Fiber Channel HBA (price $2,045) QLogic 8262, Dual Port 10Gb SFP+, Converged Network Adapter (price $1,618) I thought since the QLogic 2562 is a fiber channel and is more expensive then it is faster in terms of IOPS. But, it is a 8Gb as opposed to 10 Gb of SFP+. My questions: Which one is better (IOPS performance, etc.)? Why should I choose one over another?

    Read the article

  • How to connect two monitors to a macbook pro?

    - by CIRK
    I have a 13" macbook pro, and I need much more space right now, so I decided to buy two smaller monitors. (these from LG). But I don't really know how will I connect them. I've seen some products like this Diamond BVU195, but it's not currently in stores in my country. I've found these Equip 128450 USB 2.0 Display Adapter DELOCK USB 2.0 to DVI/VGA/HDMI Adapter The second one looks pretty cool, but it says that Windows is a system requirement or what, so I'm not sure if it will work with mac os x? So how did you connected multiple monitors to you mac, and are these adapters the best choices, if yes then is there an OS independent one?

    Read the article

  • LSI 9211-8i won't boot in KVM

    - by Paul McMillan
    I'm running ubuntu 11.04 with an LSI 9211-8i in IT mode with the latest firmware (10). I'm using KVM with VT-d enabled to pass the entire PCIe device through to the guest OS. I have the device disabled in the system BIOS. When I boot my virtual machine, the adapter quits during bios initialization with the following error: Unable to load LSI Corporation MPT BIOS MPT BIOS Fault 0Ch encountered at adapter PCI(00h,04h,00h) Press any key to continue... I know the virtualization is correctly enabled. I've blacklisted the kernel modules in the host OS. Has anyone else encountered this error? I'm about out of ideas here. Edit: I contacted LSI tech support about this, and they suggested that I try RedHat and Xen. Apparently they don't test or support anything else.

    Read the article

  • Imagemagick PDF to JPG conversion failing

    - by Scott
    I'm trying to convert the first page of a PDF to a JPG. I'm pretty sure I got this to work with certain PDFs, but is it really possible that certain PDFs are made incorrectly and cannot be converted? I tried running this first: $ convert 10-03-26.pdf[1] test.jpg And I got the follow: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 convert: Postscript delegate failed `10-03-26.pdf'. Running this instead: $ convert -verbose -colorspace rgb '10-03-26.pdf[1]' test.jpg I get the following: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 "gs" -q -dBATCH -dSAFER -dMaxBitmap=500000000 -dNOPAUSE -dAlignToPixels=0 "-sDEVICE=pnmraw" -dTextAlphaBits=4 -dGraphicsAlphaBits=4 "-g792x1611" "-r72x72" -dFirstPage=2 -dLastPage=2 "-sOutputFile=/tmp/magick-XXU3T44P" "-f/tmp/magick-XXoMKL8Z" "-f/tmp/magic2eec1F"Start of Image Define Huffman Table 0x00 0 1 5 1 1 1 1 1 1 0 0 0 0 0 0 0 Define Huffman Table 0x01 0 3 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Define Huffman Table 0x10 0 2 1 3 3 2 4 3 5 5 4 4 0 0 1 125 Define Huffman Table 0x11 0 2 1 2 4 4 3 4 7 5 4 4 0 1 2 119 End Of Image convert: Postscript delegate failed `10-03-26.pdf'. Why would the conversion fail? Just as an aside, this is happening on a (gs) Grid-Service on (mt) Media Temple hosting. I cannot install programs on the server, but both Imagemagick and Ghostscript are installed Thanks!

    Read the article

  • mysql.proc has gone corrupt. How can I fix it?

    - by Metalcoder
    I have a server running Debian 5.0, and MySQL. Suddendly, MySQL stopped working, and after many attempts to fix it, I decided to reinstall it. I installed MySQL 5.1.63, and when started it goes to safe mode. I made some typing, and when I executed mysql_upgrade as root, it complained: ... Running 'mysql_fix_privilege_tables'... ERROR 1548 (HY000) at line 1111: Cannot load from mysql.proc. The table is probably corrupted ERROR 1064 (42000) at line 1112: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'sqlstate 'HY000' set message_text='Unexpected content found in the performance_s' at line 1 ERROR 1548 (HY000) at line 1125: Cannot load from mysql.proc. The table is probably corrupted FATAL ERROR: Upgrade failed I checked the mysql.proc table, and it's comment column was slightly different from my backup. -- My backup says: `comment` char(64) CHARACTER SET utf8 COLLATE utf8_bin NOT NULL DEFAULT '', -- But it were: `comment` text CHARACTER SET utf8 COLLATE utf8_bin NOT NULL, So, I restored my mysql database backup, and now they all match, but mysql_upgrade still trigger the same errors. I also tried do check and repair the mysql.proc table, but got no success.

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Bind DHCP Server to Network Bridge

    - by Luke
    My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

    Read the article

  • Can I use a mini PCI-E card in a standard motherboard with PCI/PCI Express slots?

    - by White Phoenix
    I'm helping someone build a computer and they absolutely insist on having an internal Bluetooth adapter. I've been searching around for a PCI-E/PCI based Bluetooth adapter but I've had no luck finding one - I've found some discontinued ones but they have giant antennas coming out the back - the person I'm building the computer for doesn't want that. I've been repeatedly insisting on him simply getting a USB Bluetooth dongle, but he doesn't want one taking up his external USB slots. This is the motherboard I'm using for his build: http://www.newegg.com/Product/Product.aspx?Item=N82E16813157303 My question is if it's possible to use one of those laptop PCI-E cards in a motherboard like this that has PCI-E and PCI slots, or if the form factor is completely different and won't fit?

    Read the article

  • Help changing MAC address in Windows 7 [closed]

    - by Niphoet
    Possible Duplicate: Change MAC Address I need to change the MAC address of my wireless adapter in Windows 7 (Ultimate RTM). I used to do this in XP both directly in the registry editor and with a .REG file I wrote. I have used each of these methods in Windows 7, as well as a few tools I found that are supposed to do this. Every time I change it, I disable and re-enable the network adapter in control panel, but upon running ipconfig /all it still shows my old MAC address. Any help? By the way, I do have Administrative Rights and UAC turned off.

    Read the article

  • Ubuntu not connecting to network in Hyper-V

    - by soandos
    I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

    Read the article

  • Thinking of Powerline adapters for networking

    - by Henderson McCoy
    will powerline work as good as wifi I am now in a large house (renting a room) and the router is in the front of the house and I am in the back. Don't know if wifi will have the range and stability so I am looking at all the alternatives from running a long cable to powerline. looks like a powerline adapter set will cost about $50 http://www.bestbuy.com/site/Actiontec---500-Mbps-Powerline-Home-Theater-Network-Adapter-Kit/5215483.p?id=1218625358741&skuId=5215483 has anyone use these or other powerline adapters? how is powerlines speed? Are they more stable then wifi? powerline cost is good i am just currious about the performance

    Read the article

  • Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

    - by GregC
    I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

    Read the article

  • 1000Base-X layer 2/MAC address details

    - by user69971
    A layer 2 Ethernet frame is sent with a source and destination MAC address. Given a 100Base-TX (copper) trunk between two Cisco switches, I can do a "show interface fa 0/0" on S1 to see the MAC address assigned to the trunking interface, then go to Switch2 and do a "show mac address-table" and find the MAC address of the S1 fa 0/0 interface as a dynamically learned MAC in the table. Given a similar setup with a 1000Base-X (fiber GBIC) trunk, the MAC address shown in "show interface gi 0/0" on S1 does not show up in the MAC address-table of S2. Everything I can find online indicates that 1000Base-X uses largely the same layer 2 format as copper connections. There's some slight alterations - minimum frame size is slightly larger - but the fundamentals of the frame structure appear to be the same, including transmission with a source and destination L2 address. Why doesn't the address of gi 0/0 show up in the MAC address table of the connection switch? The only thing which seems to make sense would be that the GBIC has its own MAC address, almost as if its acting as a mini 2-port switch or hub, with the switch-assigned MAC address showing up on the interface connection and a different MAC address assigned to the fiber side. If this is the case, is there any way to see the GBIC MAC address on the switch? (I've tried to look up the details in IEEE 802.3z but it doesn't seem to be available without an IEEE membership or purchasing the standard. I find the base 802.3 PDFs for download, but not 802.3z.)

    Read the article

  • HP DL580 G5 Hyper-V networking problem

    - by mr-perfect
    Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

    Read the article

  • Need help tuning Mysql and linux server

    - by Newtonx
    We have multi-user application (like MailChimp,Constant Contact) . Each of our customers has it's own contact's list (from 5 to 100.000 contacts). Everything is stored in one BIG database (currently 25G). Since we released our product we have the following data history. 5 years of data history : - users/customers (200+) - contacts (40 million records) - campaigns - campaign_deliveries (73.843.764 records) - campaign_queue ( 8 millions currently ) As we get more users and table records increase our system/web app is getting slower and slower . Some queries takes too long to execute . SCHEMA Table contacts --------------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------------+------------------+------+-----+---------+----------------+ | contact_id | int(10) unsigned | NO | PRI | NULL | auto_increment | | client_id | int(10) unsigned | YES | | NULL | | | name | varchar(60) | YES | | NULL | | | mail | varchar(60) | YES | MUL | NULL | | | verified | int(1) | YES | | 0 | | | owner | int(10) unsigned | NO | MUL | 0 | | | date_created | date | YES | MUL | NULL | | | geolocation | varchar(100) | YES | | NULL | | | ip | varchar(20) | YES | MUL | NULL | | +---------------------+------------------+------+-----+---------+----------------+ Table campaign_deliveries +---------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | newsletter_id | int(10) unsigned | NO | MUL | 0 | | | contact_id | int(10) unsigned | NO | MUL | 0 | | | sent_date | date | YES | MUL | NULL | | | sent_time | time | YES | MUL | NULL | | | smtp_server | varchar(20) | YES | | NULL | | | owner | int(5) | YES | MUL | NULL | | | ip | varchar(20) | YES | MUL | NULL | | +---------------+------------------+------+-----+---------+----------------+ Table campaign_queue +---------------+------------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +---------------+------------------+------+-----+---------+----------------+ | queue_id | int(10) unsigned | NO | PRI | NULL | auto_increment | | newsletter_id | int(10) unsigned | NO | MUL | 0 | | | owner | int(10) unsigned | NO | MUL | 0 | | | date_to_send | date | YES | | NULL | | | contact_id | int(11) | NO | MUL | NULL | | | date_created | date | YES | | NULL | | +---------------+------------------+------+-----+---------+----------------+ Slow queries LOG -------------------------------------------- Query_time: 350 Lock_time: 1 Rows_sent: 1 Rows_examined: 971004 SELECT COUNT(*) as total FROM contacts WHERE (contacts.owner = 70 AND contacts.verified = 1); Query_time: 235 Lock_time: 1 Rows_sent: 1 Rows_examined: 4455209 SELECT COUNT(*) as total FROM contacts WHERE (contacts.owner = 2); How can we optimize it ? Queries should take no more than 30 secs to execute? Can we optimize it and keep all data in one BIG database or should we change app's structure and set one single database to each user ? Thanks

    Read the article

  • syslog-ng and nging logs to mysql

    - by Katafalkas
    So couple of days ago I asked how to log php and nginx logs to centralized MySQL database, and m0ntassar gave a perfect answer :) cheer ! The problem I am facing now is that I can not seem to get it working. syslog-ng version: # syslog-ng --version syslog-ng 3.2.5 This is my nginx log format: log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; syslog-ng source: source nginx { file( "/var/log/nginx/tg-test-3.access.log" follow_freq(1) flags(no-parse) ); }; syslog-ng destination: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("superpasswd") database("syslog") table("nginx") columns("remote_addr","remote_user","time_local","request","status","body_bytes_sent","http_ referer","http_user_agent","http_x_forwarded_for") values("$REMOTE_ADDR", "$REMOTE_USER", "$TIME_LOCAL", "$REQUEST", "$STATUS","$BODY_BYTES_SENT", "$HTTP_REFERER", "$HTTP_USER_AGENT", "$HTTP_X_FORWARDED_FOR")); }; MySQL table for testing purposes: CREATE TABLE `nginx` ( `remote_addr` varchar(100) DEFAULT NULL, `remote_user` varchar(100) DEFAULT NULL, `time` varchar(100) DEFAULT NULL, `request` varchar(100) DEFAULT NULL, `status` varchar(100) DEFAULT NULL, `body_bytes_sent` varchar(100) DEFAULT NULL, `http_referer` varchar(100) DEFAULT NULL, `http_user_agent` varchar(100) DEFAULT NULL, `http_x_forwarded_for` varchar(100) DEFAULT NULL, `time_local` text, `datetime` text, `host` text, `program` text, `pid` text, `message` text ) ENGINE=InnoDB DEFAULT CHARSET=latin1 Now first thing that goes wrong is when I restart syslog-ng: # /etc/init.d/syslog-ng restart Stopping syslog-ng: [ OK ] Starting syslog-ng: WARNING: You are using the default values for columns(), indexes() or values(), please specify these explicitly as the default will be dropped in the future; [ OK ] I have tried creating a file destination and it all works fine, and then I have tried replacing my destination with: destination d_sql { sql(type(mysql) host("127.0.0.1") username("syslog") password("kosmodromas") database("syslog") table("nginx") columns("datetime", "host", "program", "pid", "message") values("$R_DATE", "$HOST", "$PROGRAM", "$PID", "$MSGONLY") indexes("datetime", "host", "program", "pid", "message")); }; Which did work and it was writing stuff to mysql, The problem is that I want to write stuff to in exact format as nginx log format is. I assume that I am missing something really simple or I need to do some parsing between source and destination. Any help will be much appreciated :)

    Read the article

  • How to separate Hyper-V Private network from the External network

    - by Ron Ratzlaff
    I am setting up a virtual test lab and I configured a domain controller VM running Windows 2008 R2 on my Hyper-V 2008 R2 server. I needed to download and install updates on it so I added an External NIC adapter and got that done. However, systems on my actual real physical domain were pulling IPs from this server and that was a big oopsy on my part so I immediately removed the External NIC adapter until I could find out how to go about keeping the Private and the External separate. If someone from the Server Fault community can help with this since I am pretty new to this, I would be very grateful. Thanks everyone.

    Read the article

  • How is virtual machine port opening works

    - by Xianlin
    I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

    Read the article

  • Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

    - by Dmitry S
    I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option.

    Read the article

  • Change the order of DNS lookup when connected in the VPN

    - by qwerty2010
    Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

    Read the article

  • Debian Lenny - network interfaces(eth) are in DOWN state

    - by pachanga
    Folks, I'm facing a very weird problem with one of my production servers(it's Debian Lenny) - after reboot network interfaces(eth0,eth1) are in DOWN state. Looks like an Intel based networking adapter is installed on the server, lspci lists it as follows: Ethernet controller: Intel Corporation Device 10c9 (rev 01) The kernel driver responsible for this adapter is "igb". I tried "modprobe -r igb && modprobe igb", network interfaces first disappear then appear, but they are in DOWN state again. What could go wrong? It used to be working just fine. How can this be fixed?

    Read the article

  • Something very strange with network

    - by Rodnower
    Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

    Read the article

  • My Western Digital 500GB Passport disk says "not formatted" when I plug it in Windows

    - by learnerforever
    Hi, When I plug my Western Digital 500 GB Passport disk in my Windows machine, it says "not formatted, do you want to format it" something. I started having this problem after I put it in an old desktop at home. I don't exactly know what went wrong. May be partition table is corrupted etc. Questions: Some quick search on internet tells me there are partition fixing utilities, which can fix corrupted partition table. testdisk being one of such utiities. I can understand how to use this to copy files from the disk to some other location, but I would like to fix the partition table in-place so that I don't have to temporary move around my data of approx size 300GB, then format passport disk and then again bring back the data. Is there any way I can fix the partition table in-place? Also, how to know which file system was there originally in the disk? Can I only keep the same file system? My current laptop is running Windows 7. Earlier I used to use Windows Vista. My other laptop has Windows XP. So I have access to Windows 7 and Windows XP. Please help! Thanks,

    Read the article

  • HDD is not recognized/initialized via USB, only via SATA - is a reformat through USB a bad idea?

    - by Wuschelbeutel Kartoffelhuhn
    I have a 4TB Hitachi HDD that I purchased in Europe (I use it as a backup disk); I use Windows 7. When I connect it to a SATA port, it is recognized in Windows Explorer and gives no problems, even after transferring 3TB at a time or after being on for days. When I connect it via a SATA-to-USB2.0 adapter, it is also recognized, but when I transfer a large amount of data, it will intermittently stop being recognized by Windows Explorer and cancel the transfer. When I connect it via an external enclosure (which is technically a SATA-to-USB3.0 adapter), it does not display at all in Windows Explorer, but Disk Management will show the drive, albeit uninitialized (prompts for format). I only got the external enclosure because I want to backup my files more conveniently (instead of having to open the computer case each time). Do you advise against reformat/initialization via the external enclosure? Can it screw up things in an irrevocable way (Master Boot Record etc.)?

    Read the article

< Previous Page | 318 319 320 321 322 323 324 325 326 327 328 329  | Next Page >