Search Results

Search found 53261 results on 2131 pages for 'system state'.

Page 323/2131 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• HP to Cisco spanning tree root flapping

  - by Tim Brigham

  Per a recent question I recently configured both my HP (2x 2900) and Cisco (1x 3750) hardware to use MSTP for interoperability. I thought this was functional until I applied the change to the third device (HP switch 1 below) at which time the spanning tree root started flapping causing performance issues (5% packet loss) between my two HP switches. I'm not sure why. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. I'd prefer the Cisco stack to act as the root. EDIT: There is one specific line - 'spanning-tree 1 path-cost 500000' in the HP switch 2 that I didn't add and was preexisting. I'm not sure if it could have the kind of impact that I'm describing. I'm more a security and monitoring guy then networking. EDIT 2: I'm starting to believe the problem lies in the fact that the value for my MST 0 instance on the Cisco is still at the default 32768. I worked up a diagram: This is based on every show command I could find for STP. I'll make this change after hours and see if it helps. Cisco 3750 Config: version 12.2 spanning-tree mode mst spanning-tree extend system-id spanning-tree mst configuration name mstp revision 1 instance 1 vlan 1, 40, 70, 100, 250 spanning-tree mst 1 priority 0 vlan internal allocation policy ascending interface TenGigabitEthernet1/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface TenGigabitEthernet2/1/1 switchport trunk encapsulation dot1q switchport mode trunk ! interface Vlan1 no ip address ! interface Vlan100 ip address 192.168.100.253 255.255.255.0 ! Cisco 3750 show spanning tree: show spanning-tree MST0 Spanning tree enabled protocol mstp Root ID Priority 32768 Address 0004.ea84.5f80 Cost 200000 Port 53 (TenGigabitEthernet1/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32768 (priority 32768 sys-id-ext 0) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Root FWD 2000 128.53 P2p MST1 Spanning tree enabled protocol mstp Root ID Priority 1 Address a44c.11a6.7c80 This bridge is the root Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 1 (priority 0 sys-id-ext 1) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2000 128.53 P2p Cisco 3750 show logging: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan100, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up HP Switch 1: ; J9049A Configuration Editor; Created on release #T.13.71 vlan 1 name "DEFAULT_VLAN" untagged 1-8,10,13-16,18-23,A1-A4 ip address 100.100.100.17 255.255.255.0 no untagged 9,11-12,17,24 exit vlan 100 name "192.168.100" untagged 9,11-12,17,24 tagged 1-8,10,13-16,18-23,A1-A4 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A4 no ip address exit vlan 40 name "Cafe" tagged 1,4,7,A1-A4 no ip address exit vlan 250 name "Firewall" tagged 1,4,7,A1-A4 no ip address exit vlan 70 name "DMZ" tagged 1,4,7-8,13,A1-A4 no ip address exit spanning-tree spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 password manager password operator HP Switch 1 show spanning tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 363,490 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | Auto 128 Disabled | HP Switch 1 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00842 stp: MSTI 1 starved for an MSTI Msg Rx on port A4 from 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to 32768:0021f7-126580 00839 stp: MSTI 1 Root changed from 32768:0021f7-126580 to 0:a44c11-a67c80 00839 stp: MSTI 1 Root changed from 0:a44c11-a67c80 to ... HP Switch 2 Configuration: ; J9146A Configuration Editor; Created on release #W.14.49 vlan 1 name "DEFAULT_VLAN" untagged 1,3-17,21-24,A1-A2,B2 ip address 100.100.100.36 255.255.255.0 no untagged 2,18-20,B1 exit vlan 100 name "192.168.100" untagged 2,18-20 tagged 1,3-17,21-24,A1-A2,B1-B2 no ip address exit vlan 21 name "Users_2" tagged 1,A1-A2,B2 no ip address exit vlan 40 name "Cafe" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 250 name "Firewall" tagged 1,13-14,16,A1-A2,B2 no ip address exit vlan 70 name "DMZ" tagged 1,13-14,16,A1-A2,B2 no ip address exit logging 192.168.100.18 spanning-tree spanning-tree 1 path-cost 500000 spanning-tree config-name "mstp" spanning-tree config-revision 1 spanning-tree instance 1 vlan 1 40 70 100 250 HP Switch 2 Spanning Tree: show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 2-39,41-69,71-99,101-249,251-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 21,793 Time Since Last Change : 14 hours CST Root MAC Address : 0004ea-845f80 CST Root Priority : 32768 CST Root Path Cost : 200000 CST Root Port : A1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 2000 IST Remaining Hops : 19 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Forwarding | 0024a8-cd6000 2 Yes No B2 | Auto 128 Disabled | HP Switch 2 Logging: I removed the date / time fields since they are inaccurate (no NTP configured on these switches) 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80 00839 stp: IST Root changed from 32768:0021f7-126580 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0004ea-845f80 00839 stp: CST Root changed from 32768:0004ea-845f80 to 32768:0024a8-cd6000 00435 ports: port B1 is Blocked by STP 00839 stp: CST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: IST Root changed from 32768:0024a8-cd6000 to 32768:0021f7-126580 00839 stp: CST Root changed from 32768:0021f7-126580 to 32768:0004ea-845f80

  Read the article

• Migrating Outlook data with oracle connector for outlook

  - by amir shadaab

  I have a system which uses Oracle connector for MS outlook 2007. I recently bought a new system and I want to transfer al my email(the one that uses oracle connector) to another system with all the same settings. I know that during a normal transfer, I just need to transfer the .pst file and open it in another system. But I'm not sure how to go ahead with Oracle connector servers. Please help me out with this one.

  Read the article

• Why my VPN doesn't work anymore?

  - by xx77aBs

  I have openvpn server running on debian lenny. There is only one client - and it is running Windows 7 64-bit. This has worked for few months without any problems. And now, let's say for the last 7 days, it doesn't work at all. I connect successfully from client to the server, but I can't access anything through VPN. I have set it up so that all internet traffic is routed through VPN, and now when I connect with the client, the client can't do anything on the net (open any webpage, ping google, anything ...). Can you help me to figure out what's wrong ? I don't know where to start. I've also tried to connect to another openvpn server (I've installed and configured openvpn on another server, and when I try to connect to it result is the same). So I think there's something wrong with client ... Here is my connection log: Wed Apr 04 21:35:59 2012 OpenVPN 2.3-alpha1 Win32-MSVC++ [SSL (OpenSSL)] [LZO2] [PF_INET6] [IPv6 payload 20110522-1 (2.2.0)] built on Feb 21 2012 Enter Management Password: Wed Apr 04 21:35:59 2012 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.10:25340 Wed Apr 04 21:35:59 2012 Need hold release from management interface, waiting... Wed Apr 04 21:36:00 2012 MANAGEMENT: Client connected from [AF_INET]127.0.0.10:25340 Wed Apr 04 21:36:00 2012 MANAGEMENT: CMD 'state on' Wed Apr 04 21:36:00 2012 MANAGEMENT: CMD 'log all on' Wed Apr 04 21:36:00 2012 MANAGEMENT: CMD 'hold off' Wed Apr 04 21:36:00 2012 MANAGEMENT: CMD 'hold release' Wed Apr 04 21:36:00 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Wed Apr 04 21:36:00 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Apr 04 21:36:00 2012 Socket Buffers: R=[8192->8192] S=[8192->8192] Wed Apr 04 21:36:00 2012 MANAGEMENT: >STATE:1333568160,RESOLVE,,, Wed Apr 04 21:36:00 2012 UDPv4 link local: [undef] Wed Apr 04 21:36:00 2012 UDPv4 link remote: [AF_INET]11.22.33.44:1234 Wed Apr 04 21:36:00 2012 MANAGEMENT: >STATE:1333568160,WAIT,,, Wed Apr 04 21:36:00 2012 MANAGEMENT: >STATE:1333568160,AUTH,,, Wed Apr 04 21:36:00 2012 TLS: Initial packet from [AF_INET]11.22.33.44:1234, sid=ee329574 f15e9e04 Wed Apr 04 21:36:00 2012 VERIFY OK: depth=1, C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, CN=Fort-Funston CA, [email protected] Wed Apr 04 21:36:00 2012 VERIFY OK: depth=0, C=US, ST=CA, L=SanFrancisco, O=Fort-Funston, CN=server_key, [email protected] Wed Apr 04 21:36:01 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Apr 04 21:36:01 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Apr 04 21:36:01 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Apr 04 21:36:01 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Apr 04 21:36:01 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Apr 04 21:36:01 2012 [server_key] Peer Connection Initiated with [AF_INET]11.22.33.44:1234 Wed Apr 04 21:36:02 2012 MANAGEMENT: >STATE:1333568162,GET_CONFIG,,, Wed Apr 04 21:36:03 2012 SENT CONTROL [server_key]: 'PUSH_REQUEST' (status=1) Wed Apr 04 21:36:03 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,route 172.16.100.1,topology net30,ping 10,ping-restart 120,ifconfig 172.16.100.6 172.16.100.5' Wed Apr 04 21:36:03 2012 OPTIONS IMPORT: timers and/or timeouts modified Wed Apr 04 21:36:03 2012 OPTIONS IMPORT: --ifconfig/up options modified Wed Apr 04 21:36:03 2012 OPTIONS IMPORT: route options modified Wed Apr 04 21:36:03 2012 ROUTE_GATEWAY 192.168.1.1/255.255.255.0 I=15 HWADDR=00:1f:1f:3f:61:55 Wed Apr 04 21:36:03 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Wed Apr 04 21:36:03 2012 MANAGEMENT: >STATE:1333568163,ASSIGN_IP,,172.16.100.6, Wed Apr 04 21:36:03 2012 open_tun, tt->ipv6=0 Wed Apr 04 21:36:03 2012 TAP-WIN32 device [VPN] opened: \\.\Global\{E28FD52B-F6C3-4094-A36A-30CB02FAC7E8}.tap Wed Apr 04 21:36:03 2012 TAP-Win32 Driver Version 9.9 Wed Apr 04 21:36:03 2012 Notified TAP-Win32 driver to set a DHCP IP/netmask of 172.16.100.6/255.255.255.252 on interface {E28FD52B-F6C3-4094-A36A-30CB02FAC7E8} [DHCP-serv: 172.16.100.5, lease-time: 31536000] Wed Apr 04 21:36:03 2012 Successful ARP Flush on interface [31] {E28FD52B-F6C3-4094-A36A-30CB02FAC7E8} Wed Apr 04 21:36:08 2012 TEST ROUTES: 2/2 succeeded len=1 ret=1 a=0 u/d=up Wed Apr 04 21:36:08 2012 C:\Windows\system32\route.exe ADD 11.22.33.44 MASK 255.255.255.255 192.168.1.1 Wed Apr 04 21:36:08 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=25 and dwForwardType=4 Wed Apr 04 21:36:08 2012 Route addition via IPAPI succeeded [adaptive] Wed Apr 04 21:36:08 2012 C:\Windows\system32\route.exe ADD 0.0.0.0 MASK 128.0.0.0 172.16.100.5 Wed Apr 04 21:36:08 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Wed Apr 04 21:36:08 2012 Route addition via IPAPI succeeded [adaptive] Wed Apr 04 21:36:08 2012 C:\Windows\system32\route.exe ADD 128.0.0.0 MASK 128.0.0.0 172.16.100.5 Wed Apr 04 21:36:08 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Wed Apr 04 21:36:08 2012 Route addition via IPAPI succeeded [adaptive] Wed Apr 04 21:36:08 2012 MANAGEMENT: >STATE:1333568168,ADD_ROUTES,,, Wed Apr 04 21:36:08 2012 C:\Windows\system32\route.exe ADD 172.16.100.1 MASK 255.255.255.255 172.16.100.5 Wed Apr 04 21:36:08 2012 ROUTE: CreateIpForwardEntry succeeded with dwForwardMetric1=30 and dwForwardType=4 Wed Apr 04 21:36:08 2012 Route addition via IPAPI succeeded [adaptive] Wed Apr 04 21:36:08 2012 Initialization Sequence Completed Wed Apr 04 21:36:08 2012 MANAGEMENT: >STATE:1333568168,CONNECTED,SUCCESS,172.16.100.6,11.22.33.44 Client's route table after connection with OpenVPN: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.41 281 0.0.0.0 128.0.0.0 172.16.100.1 172.16.100.6 31 94.23.53.45 255.255.255.255 192.168.1.1 192.168.1.41 25 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 172.16.100.1 172.16.100.6 31 172.16.100.4 255.255.255.252 On-link 172.16.100.6 286 172.16.100.6 255.255.255.255 On-link 172.16.100.6 286 172.16.100.7 255.255.255.255 On-link 172.16.100.6 286 192.168.1.0 255.255.255.0 On-link 192.168.1.41 281 192.168.1.41 255.255.255.255 On-link 192.168.1.41 281 192.168.1.255 255.255.255.255 On-link 192.168.1.41 281 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.41 281 224.0.0.0 240.0.0.0 On-link 172.16.100.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.41 281 255.255.255.255 255.255.255.255 On-link 172.16.100.6 286 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.1.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 13 58 ::/0 On-link 1 306 ::1/128 On-link 13 58 2001::/32 On-link 13 306 2001:0:5ef5:79fd:3cc3:6b9:ac7c:14db/128 On-link 15 281 fe80::/64 On-link 31 286 fe80::/64 On-link 13 306 fe80::/64 On-link 13 306 fe80::3cc3:6b9:ac7c:14db/128 On-link 31 286 fe80::7d72:9515:7213:35e3/128 On-link 15 281 fe80::9cec:ce3f:89de:a123/128 On-link 1 306 ff00::/8 On-link 13 306 ff00::/8 On-link 15 281 ff00::/8 On-link 31 286 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Custom initrd init script: how to create /dev/initctl

  - by Posco Grubb

  I have a virtual machine (VMM is Xen 3.3) equipped with two IDE HDD's (/dev/hda and /dev/hdb). The root file system is in /dev/hda1, where Scientific Linux 5.4 is installed. /dev/hdb contains an empty ext2 file system. I want to protect the root file system from writes by the VM by using aufs (AnotherUnionFS) to layer a writable file system on top of the root file system. The changes to / will be written to the file system located on /dev/hdb. (Furthermore, outside the VM, the file backing the /dev/hda will also be set to read-only permissions, so the VMM should also prevent the VM from modifying at that level.) (The purpose of this setup: be able to corrupt a virtual machine using software-implemented fault injection but preserve the file system image in order to quickly reboot the VM to a fault-free state.) How do I get an initrd init script to do the necessary mounts to create the union file system? I've tried 2 approaches: I've tried modifying the nash script that mkinitrd creates, but I don't know what setuproot and switchroot do and how to make them use my aufs as the new root. Apparently, nobody else here knows either. (EDIT: I take that back.) I've tried building a LiveCD (using linux-live-6.3.0) and then modifying the Bash /linuxrc script from the generated initrd, and I got the mounts correct, but the final /sbin/init complains about /dev/initctl. Specifically, my /linuxrc mounts the aufs at /union. The last few lines of /linuxrc effectively do the following: cd /union mkdir -p mnt/live pivot_root . mnt/live exec sbin/chroot . sbin/init </dev/console >/dev/console 2>&1 When init starts, it outputs something like init: /dev/initctl: No such file or directory. What is supposed to create this FIFO? I found no such filename in the original linuxrc and liblinuxlive scripts. I tried creating it via "mkfifo /dev/initctl", but then init complained about a timeout opening or writing to the FIFO. Would appreciate any help or pointers. Thanks.

  Read the article

• .dll Solidworks Add-in not registering in COM

  - by Abhijit

  I am trying to register this .dll in COM as an Add-in to Solid Works software. The dll is building without any error or warnings.But the Add-in is not appearing in the Windows "Registry Editor" as should be the case.Kindly suggest me a solution. Thanks in advance. Below is my code:- using System; using System.Collections; using System.Reflection; using System.Collections.Generic; using System.Linq; using System.Text; using SolidWorks.Interop.sldworks; using SolidWorks.Interop.swcommands; using SolidWorks.Interop.swconst; using SolidWorks.Interop.swpublished; using SolidWorksTools; using SolidWorksTools.File; using System.Runtime.InteropServices; using System.Diagnostics; namespace SWADDIN_Test { [ComVisible(true)] [Guid("C380F7A6-771A-41EE-807A-1689C8E97720")] [InterfaceType(ComInterfaceType.InterfaceIsIDispatch)] interface ISWIntegration { void DoSWIntegration(); }//end of interface Dummy ISWIntegration [Guid("5EE80911-9567-4734-8E55-C347EA4635B5")] [ClassInterface(ClassInterfaceType.None)] [ProgId("SWADDIN_Test.SWIntegration")] [ComVisible(true)] public class SWIntegration : ISwAddin,ISWIntegration { public SldWorks mSWApplication; private int mSWCookie; public SWIntegration() { mSWApplication = null; mSWCookie = 0; }//end of parameterless constructor public void DoSWIntegration() { }//end of dummy method DoSWIntegration public bool ConnectToSW(object ThisSW, int Cookie) { mSWApplication = (SldWorks)ThisSW; mSWCookie = Cookie; // Set-up add-in call back info bool result = mSWApplication.SetAddinCallbackInfo(0, this, Cookie); this.UISetup(); return true; }//end of method ConnectToSW() public bool DisconnectFromSW() { return UITeardown(); }//end of method DisconnectFromSW() public void UISetup() { }//end of method UISetup() public bool UITeardown() { return true; }//end of method UITeardown() [ComRegisterFunction()]//Attribute private static void ComRegister(Type t) { string keyPath = String.Format(@"SOFTWARE\SolidWorks\AddIns{0:b}", t.GUID); using (Microsoft.Win32.RegistryKey rk = Microsoft.Win32.Registry.LocalMachine.CreateSubKey(keyPath)) { rk.SetValue(null, 1);// Load at startup rk.SetValue("Title", "Abhijit_SwAddin"); // Title rk.SetValue("Description", "All your pixels now belong to us"); // Description }//end of using statement }//end of method ComRegister() [ComUnregisterFunction()]//Attribute private static void ComUnregister(Type t) { string keyPath = String.Format(@"SOFTWARE\SolidWorks\AddIns{0:b}", t.GUID); Microsoft.Win32.Registry.LocalMachine.DeleteSubKeyTree(keyPath); }//end of method ComUnregister() }//end of class SWIntegration }//end of namespace SWADDIN_Test

  Read the article

• External hard drive FAT32 to NTFS conversion fails

  - by Pieter

  I'm trying to convert the FAT32 file system of an external hard drive to NTFS. Here's what happened: C:\Windows\system32>chkdsk G: The type of the file system is FAT32. Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. C:\Windows\system32>cd \ C:\>convert g: /fs:ntfs The type of the file system is FAT32. Enter current volume label for drive G: PIETEREXT Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. Determining disk space required for file system conversion... Total disk space: 488384001 KB Free space on volume: 177675584 KB Space required for conversion: 975155 KB Converting file system The conversion failed. G: was not converted to NTFS I looked at the TechNet page for my error, but after closing every app the conversion was still failing halfway through. Why does it keep failing? I kept an eye on Task Manager but it didn't look like my system resources were near depletion. I'm using Windows 8.

  Read the article

• SQL Server Transaction Marks: Restoring multiple databases to a common relative point

  - by Mladen Prajdic

  We’re all familiar with the ability to restore a database to point in time using the RESTORE WITH STOPAT statement. But what if we have multiple databases that are accessed from one application or are modifying each other? And over multiple instances? And all databases have different workloads? And we want to restore all of the databases to some known common relative point? The catch here is that this common relative point isn’t the same point in time for all databases. This common relative point in time might be now in DB1, now-1 hour in DB2 and yesterday in DB3. And we don’t know the exact times. Let me introduce you to Transaction Marks. When we run a marked transaction using the WITH MARK option a flag is set in the transaction log and a row is added to msdb..logmarkhistory table. When restoring a transaction log backup we can restore to either before or after that marked transaction. The best thing is that we don’t even need to have one database modifying another database. All we have to do is use a marked transaction with the same name in different database. Let’s see how this works with an example. The code comments say what’s going on. USE master GOCREATE DATABASE TestTxMark1GOUSE TestTxMark1GOCREATE TABLE TestTable1( ID INT, VALUE UNIQUEIDENTIFIER) -- insert some data into the table so we can have a starting pointINSERT INTO TestTable1SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NULLFROM master..spt_valuesORDER BY RNSELECT *FROM TestTable1GO-- TAKE A FULL BACKUP of the databseBACKUP DATABASE TestTxMark1 TO DISK = 'c:\TestTxMark1.bak'GO USE master GOCREATE DATABASE TestTxMark2GOUSE TestTxMark2GOCREATE TABLE TestTable2( ID INT, VALUE UNIQUEIDENTIFIER)-- insert some data into the table so we can have a starting pointINSERT INTO TestTable2SELECT ROW_NUMBER() OVER(ORDER BY number) AS RN, NEWID()FROM master..spt_valuesORDER BY RNSELECT *FROM TestTable2GO-- TAKE A FULL BACKUP of our databseBACKUP DATABASE TestTxMark2 TO DISK = 'c:\TestTxMark2.bak'GO -- start a marked transaction that modifies both databasesBEGIN TRAN TxDb WITH MARK -- update values from NULL to random value UPDATE TestTable1 SET VALUE = NEWID(); -- update first 100 values from random value -- to NULL in different DB UPDATE TestTxMark2.dbo.TestTable2 SET VALUE = NULL WHERE ID <= 100;COMMITGO     -- some time goes by here -- with various database activity... -- We see two entries for marks in each database. -- This is just informational and has no bearing on the restore itself.SELECT * FROM msdb..logmarkhistory USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark1 TO DISK = 'c:\TestTxMark1.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark1GO USE masterGO-- create a log backup to restore to mark pointBACKUP LOG TestTxMark2 TO DISK = 'c:\TestTxMark2.trn'GO-- drop the database so we can restore it backDROP DATABASE TestTxMark2GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark1 FROM DISK = 'c:\TestTxMark1.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark1 FROM DISK = 'c:\TestTxMark1.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO -- RESTORE THE DATABASE BACK BEFORE OUR TRANSACTION-- restore the full backup RESTORE DATABASE TestTxMark2 FROM DISK = 'c:\TestTxMark2.bak' WITH NORECOVERY;-- restore the log backup to the transaction markRESTORE LOG TestTxMark2 FROM DISK = 'c:\TestTxMark2.trn' WITH RECOVERY, -- recover to state before the transaction STOPBEFOREMARK = 'TxDb'; -- recover to state after the transaction -- STOPATMARK = 'TxDb';GO USE TestTxMark1-- we restored to time before the transaction -- so we have NULL values in our tableSELECT * FROM TestTable1 USE TestTxMark2-- we restored to time before the transaction -- so we DON'T have NULL values in our tableSELECT * FROM TestTable2   Transaction marks can be used like a crude sync mechanism for cross database operations. With them we can mark our databases with a common “restore to” point so we know we have a valid state between all databases to restore to.

  Read the article

• xbindkeys escape quotes

  - by Danilo Bargen

  How can I escape quotes in .xbindkeysrc commands? Neither of those work. "pacmd dump|awk --non-decimal-data '$1~/set-sink-volume/{system ("pacmd "$1" "$2" "$3+2500)}'" "pacmd dump|awk --non-decimal-data '\$1~/set-sink-volume/{system ("pacmd "\$1" "\$2" "\$3+2500)}'" "pacmd dump|awk --non-decimal-data '\$1~/set-sink-volume/{system (\"pacmd \"\$1\" \"\$2\" \"\$3+2500)}'" "pacmd dump|awk --non-decimal-data '$1~/set-sink-volume/{system (\"pacmd \"$1\" \"$2\" \"$3+2500)}'" (The commands raises the PluseAudio volume level)

  Read the article

• SQL Server IO handling mechanism can be severely affected by high CPU usage

  - by sqlworkshops

  Are you using SSD or SAN / NAS based storage solution and sporadically observe SQL Server experiencing high IO wait times or from time to time your DAS / HDD becomes very slow according to SQL Server statistics? Read on… I need your help to up vote my connect item – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage. Instead of taking few seconds, queries could take minutes/hours to complete when CPU is busy.In SQL Server when a query / request needs to read data that is not in data cache or when the request has to write to disk, like transaction log records, the request / task will queue up the IO operation and wait for it to complete (task in suspended state, this wait time is the resource wait time). When the IO operation is complete, the task will be queued to run on the CPU. If the CPU is busy executing other tasks, this task will wait (task in runnable state) until other tasks in the queue either complete or get suspended due to waits or exhaust their quantum of 4ms (this is the signal wait time, which along with resource wait time will increase the overall wait time). When the CPU becomes free, the task will finally be run on the CPU (task in running state).The signal wait time can be up to 4ms per runnable task, this is by design. So if a CPU has 5 runnable tasks in the queue, then this query after the resource becomes available might wait up to a maximum of 5 X 4ms = 20ms in the runnable state (normally less as other tasks might not use the full quantum).In case the CPU usage is high, let’s say many CPU intensive queries are running on the instance, there is a possibility that the IO operations that are completed at the Hardware and Operating System level are not yet processed by SQL Server, keeping the task in the resource wait state for longer than necessary. In case of an SSD, the IO operation might even complete in less than a millisecond, but it might take SQL Server 100s of milliseconds, for instance, to process the completed IO operation. For example, let’s say you have a user inserting 500 rows in individual transactions. When the transaction log is on an SSD or battery backed up controller that has write cache enabled, all of these inserts will complete in 100 to 200ms. With a CPU intensive parallel query executing across all CPU cores, the same inserts might take minutes to complete. WRITELOG wait time will be very high in this case (both under sys.dm_io_virtual_file_stats and sys.dm_os_wait_stats). In addition you will notice a large number of WAITELOG waits since log records are written by LOG WRITER and hence very high signal_wait_time_ms leading to more query delays. However, Performance Monitor Counter, PhysicalDisk, Avg. Disk sec/Write will report very low latency times.Such delayed IO handling also occurs to read operations with artificially very high PAGEIOLATCH_SH wait time (with number of PAGEIOLATCH_SH waits remaining the same). This problem will manifest more and more as customers start using SSD based storage for SQL Server, since they drive the CPU usage to the limits with faster IOs. We have a few workarounds for specific scenarios, but we think Microsoft should resolve this issue at the product level. We have a connect item open – https://connect.microsoft.com/SQLServer/feedback/details/744650/sql-server-io-handling-mechanism-can-be-severely-affected-by-high-cpu-usage - (with example scripts) to reproduce this behavior, please up vote the item so the issue will be addressed by the SQL Server product team soon.Thanks for your help and best regards,Ramesh MeyyappanHome: www.sqlworkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

  Read the article

• Windows 8 installer: Something Happened

  - by mcandre

  My school provides Windows 8 through MSDN. When I run the Windows 8 installer, it says: What can I do? Specs: systeminfo | findstr /B /C:"OS Name" /C:"OS Version" OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 systeminfo | findstr /B /C:"System Manufacturer" /C:"System Model" System Manufacturer: Apple Inc. System Model: MacBookPro5,5 Also posted in Microsoft Community.

  Read the article

• PASS: The Legal Stuff

  - by Bill Graziano

  I wanted to give a little background on the legal status of PASS.  The Professional Association for SQL Server (PASS) is an American corporation chartered in the state of Illinois.  In America a corporation has to be chartered in a particular state.  It has to abide by the laws of that state and potentially pay taxes to that state.  Our bylaws and actions have to comply with Illinois state law and United States law.  We maintain a mailing address in Chicago, Illinois but our headquarters is currently in Vancouver, Canada. We have roughly a dozen people that work in our Vancouver headquarters and 4-5 more that work remotely on various projects.  These aren’t employees of PASS.  They are employed by a management company that we hire to run the day to day operations of the organization.  I’ll have more on this arrangement in a future post. PASS is a non-profit corporation.  The term non-profit and not-for-profit are used interchangeably.  In a for-profit corporation (or LLC) there are owners that are entitled to the profits of a company.  In a non-profit there are no owners.  As a non-profit, all the money earned by the organization must be retained or spent.  There is no money that flows out to shareholders, owners or the board of directors.  Any money not spent in furtherance of our mission is retained as financial reserves. Many non-profits apply for tax exempt status.  Being tax exempt means that an organization doesn’t pay taxes on its profits.  There are a variety of laws governing who can be tax exempt in the United States.  There are many professional associations that are tax exempt however PASS isn’t tax exempt.  Because our mission revolves around the software of a single company we aren’t eligible for tax exempt status. PASS was founded in the late 1990’s by Microsoft and Platinum Technologies.  Platinum was later purchased by Computer Associates. As the founding partners Microsoft and CA each have two seats on the Board of Directors.  The other six directors and three officers are elected as specified in our bylaws. As a non-profit, our bylaws layout our governing practices.  They must conform to Illinois and United States law.  These bylaws specify that PASS is governed by a Board of Directors elected by the membership with two members each from Microsoft and CA.  You can find our bylaws as well as a proposed update to them on the governance page of the PASS web site. The last point that I’d like to make is that PASS is completely self-funded.  All of our $4 million in revenue comes from conference registrations, sponsorships and advertising.  We don’t receive any money from anyone outside those channels.  While we work closely with Microsoft we are independent of them and only derive a very small percentage of our revenue from them.

  Read the article

• WIndows 7 cannot boot - bootrec reports FS not found or corrupt

  - by purecharger

  For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

  Read the article

• WIndows 7 cannot boot - bootrec reports FS not found or corrupt

  - by purecharger

  For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

  Read the article

• Why won't my Windows 8 Command line update its path

  - by mawcsco

  I needed to add a new entry to my PATH variable. This is a common activity for me in my job, but I've recently started using Windows 8. I assumed the process would be similar to Windows 7, Vista, XP... Here's my sequence of events: Open System properties (Start- [type "Control Panel"] - Control Panel\System and Security\System - Advanced system settings - Environment Variables) Add the new path to beginning of my USER PATH variable (C:\dev\Java\apache-ant-1.8.4\bin;) Opened a command prompt (Start - [type "command prompt" enter] - [type "path" enter] My new path entry is not available (see attached image and vide). I Duplicated the exact same process on a Windows 7 machine and it worked. EDIT Windows 8 Environment Variables and Command Prompt video EDIT This is definitely not the behavior of Windows 7. Watch this video to see the behavior I expect working in Windows 7. http://youtu.be/95JXY5X0fII EDIT 5/31/2013 So, after much frustration, I wrote a small C# app to test the WM_SETTINGCHANGE event. This code receives the event in both Windows 7 and Windows 8. However, in Windows 8 on my system, I do not get the correct path; but, I do in Windows 7. This could not be reproduced in other Windows 8 systems. Here is the C# code. using System; using Microsoft.Win32; public sealed class App { static void Main() { SystemEvents.UserPreferenceChanging += new UserPreferenceChangingEventHandler(OnUserPreferenceChanging); Console.WriteLine("Waiting for system events."); Console.WriteLine("Press <Enter> to exit."); Console.ReadLine(); } static void OnUserPreferenceChanging(object sender, UserPreferenceChangingEventArgs e) { Console.WriteLine("The user preference is changing. Category={0}", e.Category); Console.WriteLine("path={0}", System.Environment.GetEnvironmentVariable("PATH")); } } OnUserPreferenceChanging is equivalent to WM_SETTINGCHANGE C# program running in Windows 7 (you can see the event come through and it picks up the correct path). C# program running in Windows 8 (you can see the event come through, but the wrong path). There is something about my environment that is precipitating this problem. However, is this a Windows 8 bug?

  Read the article

• Educate me - should I buy these prebuilt NAS (which is better) or make my own?

  - by user29336

  I'm trying to learn as much as possible, and I think I've learned quite a bit so bear with me here under my confusion. I found a coupe NAS setups. I'm not sure if one is better than the other, other than the price being higher on some, and some coming with drives VS not. Let me list my setup so you can get an idea of what I want to provide: Macbook Pro Macbook Mini for Media streaming (so far) Windows 7 Gaming Computer Xbox 360 I'd like to provide a storage system for all these devices so they can access files very easily, I'd also like any of these devices to be able to stream media from this storage system. I'd like this storage system to be hassle free in terms of my confidence in the data integrity. If a drive fails, I want to know that I can replace the drive and all my files will still exist. I'd like to access this storage system OUTSIDE of my LAN. If I'm out on a job for work I'd like to go in, or be able to have people DL some files. This brings me to a question, is this what iSCSI is? I'd like this data system to be able to download torrents. I want to mount any drive on this storage system onto my OSX laptop as if it were a local drive attached. (Is this with iSCSI is?) I'd like this system to have a GOOD web based GUI. I don't want to install software to use it. I believe those are the most of my requirements. If I'm missing something that I have no knowledge about, can someone educate me? Here are the systems I found: $729ish on Newegg Lacie 5Big Network 2 (comes with 5TB of space. iSCSI / mac compatible, torrents, nice ui, + others?) Is this overpriced for what it provides? It almost seems like a great deal to me because of the 5TB of space it comes with vs the other NAS systems that don't come with storage but cost $600-700. Should I get a different NAS system? Netgear? Others? Do they have same features? Better? Is it better to buy your own disks? What about making my own? I'm tech savy all around. It seems cheaper to buy a premade one especially with the support/warranty it provides...

  Read the article

• putting folders above public_html in a shared hosting environment

  - by redconservatory

  On my local environment, the following settings work in my index.php file: $system_path = '../../ci/system/'; $application_folder = '../../ci/application'; My folder structure looks like this: -ci ---system ---application -public_html ---site ----index.php This works on my local environment, but when I upload my files, I get an error message: Your system folder path does not appear to be set correctly. Please open the following file and correct this: index.php I tried the following: $system_path = dirname(__FILE__).'../../ci/system/'; $application_folder = dirname(__FILE__).'../../ci/application';

  Read the article

• Ubuntu 12.10 no network and no graphics

  - by khasiKoMasu

  I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

  Read the article

• encrypt multiple systems (win7 + deb)

  - by daftu

  I've installed two operatings system on single drive with 3 partitions (#1 Windows 7, #2 Debian Squeeze, #some data). Grub 2 is installed in MBR and lets me choose which system to boot. I would encrypt the 1st system partition containing Win 7. I tried to do this using TrueCrypt under Windows, but it says that encrypting Windows system with other loader (not windows loader, Grub in my case) is not supported. How can I do that?

  Read the article

• VHDL - Problem with std_logic_vector

  - by wretrOvian

  Hi, i'm coding a 4-bit binary adder with accumulator: library ieee; use ieee.std_logic_1164.all; entity binadder is port(n,clk,sh:in bit; x,y:inout std_logic_vector(3 downto 0); co:inout bit; done:out bit); end binadder; architecture binadder of binadder is signal state: integer range 0 to 3; signal sum,cin:bit; begin sum<= (x(0) xor y(0)) xor cin; co<= (x(0) and y(0)) or (y(0) and cin) or (x(0) and cin); process begin wait until clk='0'; case state is when 0=> if(n='1') then state<=1; end if; when 1|2|3=> if(sh='1') then x<= sum & x(3 downto 1); y<= y(0) & y(3 downto 1); cin<=co; end if; if(state=3) then state<=0; end if; end case; end process; done<='1' when state=3 else '0'; end binadder; The output : -- Compiling architecture binadder of binadder ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(15): No feasible entries for infix operator "xor". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(15): Type error resolving infix expression "xor" as type std.standard.bit. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): No feasible entries for infix operator "and". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in right operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): No feasible entries for infix operator "and". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in left operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Bad expression in right operand of infix expression "or". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(16): Type error resolving infix expression "or" as type std.standard.bit. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(28): No feasible entries for infix operator "&". ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(28): Type error resolving infix expression "&" as type ieee.std_logic_1164.std_logic_vector. ** Error: C:/Modeltech_pe_edu_6.5a/examples/binadder.vhdl(39): VHDL Compiler exiting I believe i'm not handling std_logic_vector's correctly. Please tell me how? :(

  Read the article

• C# remote web request certificate error

  - by Ben

  Hi. I am currently integrating a payment gateway into an application. Following a successful transaction the remote payment gateway posts details of the transaction back to my application (ITN). It posts to a HttpHandler that is used to read and validate the data. Part of the validation performed is a POST made by the handler to a validation service provided by the payment gateway. This effectively posts some of the original form values received back to the payment gateway to ensure they are valid. The url that I am posting back to is: "https://sandbox.payfast.co.za/eng/query/validate" and the code I am using: /// <summary> /// Posts the data back to the payment processor to validate the data received /// </summary> public static bool ValidateITNRequestData(NameValueCollection formVariables) { bool isValid = true; try { using (WebClient client = new WebClient()) { string validateUrl = (UseSandBox) ? SandboxValidateUrl : LiveValidateUrl; byte[] responseArray = client.UploadValues(validateUrl, "POST", formVariables); // get the resposne and replace the line breaks with spaces string result = Encoding.ASCII.GetString(responseArray); result = result.Replace("\r\n", " ").Replace("\r", "").Replace("\n", " "); if (result == null || !result.StartsWith("VALID")) { isValid = false; LogManager.InsertLog(LogTypeEnum.OrderError, "PayFast ITN validation failed", "The validation response was not valid."); } } } catch (Exception ex) { LogManager.InsertLog(LogTypeEnum.Unknown, "Unable to validate ITN data. Unknown exception", ex); isValid = false; } return isValid; } However, on calling WebClient.UploadValues the following exception is raised: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at For the sake of brevity I haven't listed the full call stack (I can do if anyone thinks it will help). The remote certificate does appear to be valid. To get around the problem I did try adding a new RemoteCertificateValidationCallback that always returned true but just ended up getting the following exception: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessPermission.Demand() at System.Net.ServicePointManager.set_ServerCertificateValidationCallback(RemoteCertificateValidationCallback value) at NopSolutions.NopCommerce.Payment.Methods.PayFast.PayFastPaymentProcessor.ValidateITNRequestData(NameValueCollection formVariables) The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.SecurityPermission The Zone of the assembly that failed was: MyComputer So I am not sure this will work in medium trust? Any help would be much appreciated. Thanks Ben

  Read the article

• WPF: Animating TranslateTransform from code

  - by ghostskunks

  I have a WPF canvas on which I'm dynamically creating objects from code. These objects are being transformed by setting the RenderTransform property, and an animation needs to be applied one of those transforms. Currently, I can't get properties of any transform to animate (although no exception gets raised and the animation appears to run - the completed event gets raised). In addition, if the animation system is stressed, sometimes the Storyboard.Completed event is never raised. All the examples I've come accross animate the transforms from XAML. MSDN documentation suggests that the x:Name property of a transform must be set for it to be animatable, but I haven't found a working way to set it from code. Any ideas? Here's the full code listing that reproduces the problem: using System; using System.Diagnostics; using System.Windows; using System.Windows.Controls; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; namespace AnimationCompletedTest { /// <summary> /// Interaction logic for MainWindow.xaml /// </summary> public partial class MainWindow : Window { Canvas panel; public MainWindow() { InitializeComponent(); MouseDown += DoDynamicAnimation; Content = panel = new Canvas(); } void DoDynamicAnimation(object sender, MouseButtonEventArgs args) { for (int i = 0; i < 12; ++i) { var e = new Ellipse { Width = 16, Height = 16, Fill = SystemColors.HighlightBrush }; Canvas.SetLeft(e, Mouse.GetPosition(this).X); Canvas.SetTop(e, Mouse.GetPosition(this).Y); var tg = new TransformGroup(); var translation = new TranslateTransform(30, 0); tg.Children.Add(translation); tg.Children.Add(new RotateTransform(i * 30)); e.RenderTransform = tg; panel.Children.Add(e); var s = new Storyboard(); Storyboard.SetTarget(s, translation); Storyboard.SetTargetProperty(s, new PropertyPath(TranslateTransform.XProperty)); s.Children.Add( new DoubleAnimation(3, 100, new Duration(new TimeSpan(0, 0, 0, 1, 0))) { EasingFunction = new PowerEase {EasingMode = EasingMode.EaseOut} }); s.Completed += (sndr, evtArgs) => { Debug.WriteLine("Animation {0} completed {1}", s.GetHashCode(), Stopwatch.GetTimestamp()); panel.Children.Remove(e); }; Debug.WriteLine("Animation {0} started {1}", s.GetHashCode(), Stopwatch.GetTimestamp()); s.Begin(); } } [STAThread] public static void Main() { var app = new Application(); app.Run(new MainWindow()); } } }

  Read the article

• Apache load balancer limits with Tomcat over AJP

  - by PAS

  Hi All, I have Apache acting as a load balancer in front of 3 Tomcat servers. Occasionally, Apache returns 503 responses, which I would like to remove completely. All 4 servers are not under significant load in terms of CPU, memory, or disk, so I am a little unsure what is reaching it's limits or why. 503s are returned when all workers are in error state - whatever that means. Here are the details: Apache config: <IfModule mpm_prefork_module> StartServers 30 MinSpareServers 30 MaxSpareServers 60 MaxClients 200 MaxRequestsPerChild 1000 </IfModule> ... <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> # Tomcat HA cluster <Proxy balancer://mycluster> BalancerMember ajp://10.176.201.9:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.201.10:8009 keepalive=On retry=1 timeout=1 ping=1 BalancerMember ajp://10.176.219.168:8009 keepalive=On retry=1 timeout=1 ping=1 </Proxy> # Passes thru track. or api. ProxyPreserveHost On ProxyStatus On # Original tracker ProxyPass /m balancer://mycluster/m ProxyPassReverse /m balancer://mycluster/m Tomcat config: <Server port="8005" shutdown="SHUTDOWN"> <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> <Listener className="org.apache.catalina.core.JasperListener" /> <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" /> <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost"> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Engine> </Service> </Server> Apache error log: [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.10:8009 (10.176.201.10) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.10) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.10 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.201.9:8009 (10.176.201.9) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.201.9) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.201.9 [Mon Mar 22 18:39:47 2010] [error] (70007)The timeout specified has expired: proxy: AJP: attempt to connect to 10.176.219.168:8009 (10.176.219.168) failed [Mon Mar 22 18:39:47 2010] [error] ap_proxy_connect_backend disabling worker for (10.176.219.168) [Mon Mar 22 18:39:47 2010] [error] proxy: AJP: failed to make connection to backend: 10.176.219.168 [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state [Mon Mar 22 18:39:47 2010] [error] proxy: BALANCER: (balancer://mycluster). All workers are in error state Load balancer top info: top - 23:44:11 up 210 days, 4:32, 1 user, load average: 0.10, 0.11, 0.09 Tasks: 135 total, 2 running, 133 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 99.2%id, 0.1%wa, 0.0%hi, 0.1%si, 0.3%st Mem: 524508k total, 517132k used, 7376k free, 9124k buffers Swap: 1048568k total, 352k used, 1048216k free, 334720k cached Tomcat top info: top - 23:47:12 up 210 days, 3:07, 1 user, load average: 0.02, 0.04, 0.00 Tasks: 63 total, 1 running, 62 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 99.8%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097372k total, 2080888k used, 16484k free, 21464k buffers Swap: 4194296k total, 380k used, 4193916k free, 1520912k cached Catalina.out does not have any error messages in it. According to Apache's server status, it seems to be maxing out at 143 requests/sec. I believe the servers can handle substantially more load than they are, so any hints about low default limits or other reasons why this setup would be maxing out would be greatly appreciated.

  Read the article

• Is there a good way to convert between BitmapSource and Bitmap?

  - by JohannesH

  As far as I can tell the only way to convert from BitmapSource to Bitmap is through unsafe code... Like this (from Lesters WPF blog): myBitmapSource.CopyPixels(bits, stride, 0); unsafe { fixed (byte* pBits = bits) { IntPtr ptr = new IntPtr(pBits); System.Drawing.Bitmap bitmap = new System.Drawing.Bitmap( width, height, stride, System.Drawing.Imaging.PixelFormat.Format32bppPArgb,ptr); return bitmap; } } To do the reverse: System.Windows.Media.Imaging.BitmapSource bitmapSource = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap( bitmap.GetHbitmap(), IntPtr.Zero, Int32Rect.Empty, System.Windows.Media.Imaging.BitmapSizeOptions.FromEmptyOptions()); Is there an easier way in the framework? And what is the reason it isn't in there (if it's not)? I would think it's fairly usable. The reason I need it is because I use AForge to do certain image operations in an WPF app. WPF wants to show BitmapSource/ImageSource but AForge works on Bitmaps.

  Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >