Search Results

Search found 9674 results on 387 pages for 'vista tips tweaks'.

Page 323/387 | < Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >

• ESXI 5.1 - Unable to trunk to cisco switch

  - by Lance

  I have configured my esxi host vSwitch1 to use the secondary NIC on my VMware host. On vSwitch1 configuration I have set the VLAN to 4095 which specifies to allow all VLANs. If my cisco switch port configuration is set to an access port my server can ping the vlan interface on the switch. If my cisco switch port configuration is set to a trunk, whilst it stays UP UP and CDP information is available, I lose my ping from VMware VM server to the local vlan interface on the switch and I lose any server connectivity to my network. Switch NIC teaming policy to Route based on originating virtual port ID Configuration based on: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006628 interface GigabitEthernet0/42 description Host Port switchport trunk encapsulation dot1q switchport trunk allowed vlan 18,220 switchport mode trunk switchport nonegotiate spanning-tree portfast trunk end Output from ESXI CLI esxcfg-vswitch -l: ~ # esxcfg-vswitch -l Switch Name Num Ports Used Ports Configured Ports MTU Uplinks vSwitch0 128 5 128 1500 vmnic0 PortGroup Name VLAN ID Used Ports Uplinks VM Network 4095 1 vmnic0 Management Network 4095 1 vmnic0 Switch Name Num Ports Used Ports Configured Ports MTU Uplinks vSwitch1 128 4 128 1500 vmnic1 PortGroup Name VLAN ID Used Ports Uplinks VM Network 2 4095 1 vmnic1 Any tips welcome!!!

  Read the article

• MySQL is killing the server IO.

  - by OneOfOne

  I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6x2GHz) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : From the cloud's IO chart, we're averaging 100mb/s read. > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. moved from superuser

  Read the article

• JAVASCRIPT ENABLED

  - by kirchoffs415

  HI, I hope somebody can help, i keep getting the following message when i log on-- Your Javascript is disabled. Limited functionality is available. it will stay for maybe a day sometimes two.I have uninstalled javascript and reinstalled but still the same. Iam using chrome. any help would be gratefull many thanks Dominic p.s. my system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

  Read the article

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• Windows file sharing with a private LAN when a public VPN is connected?

  - by netvope

  OS: Windows Vista My LAN interface is configured as a "private network". I want to have all the sharing and discovery features (Network Discovery, File Sharing, Public Folder Sharing, Printer Sharing, Password Protected Sharing, and Media Sharing), so I enabled them all. My VPN interfaces are configured as "public networks", and I do NOT want to have any of the above features. Now the problem is that if I disabled these sharing features while a VPN is connected, it affects both interfaces. I guess the Network and Sharing Center is probably an oversimplified tool that may not support multiple interfaces. Where can I tell Windows to enable sharing features for the private networks and not the public networks? For file sharing, I think I can disable "File and Printer Sharing for MS Networks" in each of the VPNs' properties. However, I will need to disable it every time I add a new VPN. Moreover, I can't find how to disable Media Sharing by this way. If this can be more easily done in Windows XP or 7, please let me know.

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine?

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• Atlassian Crucible very slow on large repository

  - by Mitch Lindgren

  Hi everyone, My company has been running a trial of Atlassian Crucible for some months now. For repositories where it's working properly, users have given very positive feedback about the tool. The problem I'm having is that we have several different projects, each with its own repository, and some of those repositories are very large. One repository in particular has a large number of branches and probably around 9,000 files per branch. Browsing that repository in Crucible is extremely slow. Crucible is running on a CentOS VM. The VM has 4GB of RAM, and I've set Crucible's maximum at 3GB, of which it is currently using 2GB. I've brought this up in a support ticket with Atlassian, and they suggested the following: In particular because you have a rather large SVN repository you will likely find that Fisheye will be creating a large index file on disk. To help improve performance a few things you can try are: Increasing the available memory available to Fisheye (see the document above). Migrating to an external database: confluence.atlassian.com/display/FISHEYE/Migrating+to+an+External+Database Excluding files and directories from your index that aren't needed: confluence.atlassian.com/display/FISHEYE/Allow+(Process) (Sorry for not hyperlinking; don't have the rep.) I've tried all of these things to an extent, but so far none have helped greatly. I was originally running Crucible on a Windows box with 2GB of RAM using the built in HSQL DB. Moving to MySQL on CentOS saw a performance increase for some repositories, and made Crucible much more stable, but did not seem to help much with our biggest repository. There are only so many files/branches I can exclude from indexing while maintaining the tool's usefulness. That being the case, does anyone have any tips on how to speed up Crucible on large repositories, without investing in insanely powerful hardware? Thanks! Edit: To clarify, since I didn't mention it explicitly above, I am using FishEye.

  Read the article

• How could Google Latitude find my exact PC location with no GPS or public wifi?

  - by Mike

  I found a similar question here but I still don't get it. You see, I live in a small town and every time I check my IP location via online services or speed test websites, my location appears to be my ISP server location (which in my case is 250 miles away). But when I tried Google latitude, it pinpointed my exact location within less than 100 meters! I use Windows Vista, Google Chrome, and when I got the message that "Google is trying to locate you", I agreed just to check what the result will be. It was scary, very scary! What I've come up after reading the above link is that Google have a kind of extensive WiFi database locations. That could be understandable with the case of public and open WiFis that are used with a lot of people. Some of them might be using applications that could gather location data and somehow this information ends up in giant Google databases. From those, Google could pinpoint a WiFi location based on its MAC address along with these bits of info that have been gathered via various sources. The issue here is that my WiFi is private, I don't even broadcast my WiFi name. So how on earth did Google find my exact PC location? Please break down the answer in layman's terms as possible.

  Read the article

• Default browser hangs

  - by Craig Hinrichs

  Intermittent hangs would occur when I would use Internet Explorer to open a new main page or new tab to a site I know would be up. The browser would open and say "Waiting for site example.com" and do nothing more. If I closed the window and reopened it it would immediately connect. Over time I would have to close and reopen the window to get to the page. This would happen to any page, including Google. Got sick of it and started using Chrome. I recently upgraded my anti-virus and am now experiencing the same issue with Chrome. I use AVG for my antivirus. Empirically it seems that if I don't make Chrome my default browser I don't experience the issue. I tested this theory for over two hours yesterday. Possible issues I have found this could be but not confirmed yet: MTU settings are not correct. I am infected but my antivirus has not caught it (unlikely but possible) ?? I would like to think this is related to my antivirus but I am unsure how to verify. I don't like the idea of killing my antivirus if #2 is a possibility. I am looking for tips on how I can troubleshoot possible issues.

  Read the article

• redirect from mysite.com to www.mysite.com

  - by jml

  hi there, i know that this has been answered many many times, so if someone wants to point me to another thread that answers my question specifically, that is fine... for right now, my searches aren't yielding many results. so i have a website like mysite.com that has a flash swf embedded in it and i go to www.mysite.com ... all of the sudden, things don't work properly. i would like to get to the bottom of this, because it's not like the page just "doesn't load" at all; it loads and i can only do certain things; as if certain functionality is disabled (might be url requests for specific urls etc). do i need to manage this in my control panel? i wouldn't assume so, because the site loads; just has a crippled functionality from within the swf. i was thinking it might have more to do with my crossdomain.xml file; could this be the case? thanks for any tips or suggestions.

  Read the article

• Expected IOPS for log writing on PS6000X SAN?

  - by dssz

  Customer is experiencing poor Sybase ASE 15 performance on a PS6000X SAN with 16 X 450GB 10K in RAID-50. The server is a Dell R710 running 2003 server R2 64bit in ESX 4.0.0,256968 I've used sqlio to benchmark the sequential write performance of 4KB blocks on the drive. sqlio -kW -t1 -s600 -dE -o1 -fsequential -b4 -BH -LS sqliotestfile.dat Result is 1900 IOPS. However, when Sybase is running a sustained workload of small inserts SAN HQ shows a consistent 590 IOPS (and 100% 4K write activity). It also shows that the write latency increases to 1.2ms from <1ms. Monitoring and tests in Sybase demonstrate the performance problem is IO related and in particular there is a lot of wait time writing to the log. The SAN indicates that write caching is enabled. What IOPS should the SAN be capable of for 4k sequential write activity? Also, with write caching enabled, shouldn't the controller be batching up the 4K writes into something more efficient? Also, any tips on Sybase on ESX would be appreciated.

  Read the article

• Server 2003 crashing intermittently, want to transfer function to other DC

  - by user1305332

  I have a Win2003R2 server that is intermittently crashing after some virus were introduced. I'm sure all virus have been cleaned thanks to Malwarebytes (were using McAfee - useless). When it crashes you can't login (local or remote) but can still access files remotely and ping it. After a while even file sharing stops and have to kill power to restart it (no BSOD) I need to either fix it (tried to reinstall SP2 and I tried to reinstall windows in repair mode but the repair option was not available when I booted from installation disks) or move it's functionality to another DC (another 2003R2 server). The server that's crashing is old with SCSI drives while the new server uses SATA drives and faster so it seems like a good idea to just transfer roles and ditch the old box. Finding replacement SCSI drives looks expensive if they ever fail. What would I need to transfer roles. If I just move the 5 FSMO roles and copy over the file shares. Would the new server have enough to run without the old server? Never done something like this, just want some tips. Thanks.

  Read the article

• win8: access denied to external USB disk; update access rights fails

  - by Gerard

  I use to work with 2 laptops (vista and win7), my work being files on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take win8. 1/ I suspect something changed with access rights, as my external disk suffered some "access denied" problem on win8. I was prompted (by win8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying "disk is not ready". Additonnally, the usb somehow was not recognized anymore. 2/ Back to win7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them i could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under win7, all the folder showed with a lock. 3/ Then back again to win8. Same problem : access denied to my disk + no way to change access rights as it gets stuck "disk is not ready". Now I am pretty sure there is some kind of bug or inconsistence in win8 / win7. I did 2/ and 3/ a few times. At some point, I also got an access denied in win7. I could restore access rigths to the disk to "system" (properties - security - EDIT for full control to group "system" ...). But then I still get the same access right pb on win8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. Now, after I tried for more than 3 days, I am losing my patience with that bloody win8 which I did not want to buy but had no choice. I upgraded win8 with the windows updates available. Does not help. Anybody can help me ?

  Read the article

• Using multiple computers effectively

  - by Benjamin Oakes

  I have some extra (old) Macs and PCs around the house and a MacBook that's sometimes overworked. I'm looking for tips on using multiple computers effectively. Basically, I'd like to add to the following list. Here's what I'm using so far: Teleport: lets you use a single mouse and keyboard to control several Macs, like Synergy Built-in file sharing: lets me run programs on another Mac, but only maintain one copy of the data Bazaar: distributed version control Mail.app, Thunderbird, etc.: IMAP for my mail accounts TuneConnect: control iTunes on another Mac with a nice interface, using the library on my MacBook (if I choose it by pressing option at startup) over file sharing OmniFocus: syncs across computers pretty seamlessly Web browsing across computers VNC/Remote Desktop Running X-windows programs using ssh -Y hostname for headless operation (but they die when I sleep the connecting computer -- something like GNU screen would be ideal) Plain-old ssh with GNU screen Really, a better idea of what I do might be necessary. Generally though, I'd like to distribute tasks across more than one computer when possible, but not have much overhead in doing so. The perfect solution? An Xgrid-like program that pushes processing across multiple computers automatically and seamlessly (although that seems unlikely). Here's what I have, in case it makes a difference: MacBook (Dual 2.16 GHz, OS X 10.6.3) eMac (1.25 GHz, OS X 10.4.11, soon to be 10.5) Dell Dimension (800 MHz, some version of Ubuntu) -- no dedicated monitor PowerMac G3 (400 MHz, OS X 10.4.11) -- no dedicated monitor iMac G3 DV (400 MHz, OS X 10.4.11) -- currently in the kitchen for recipes, email, web browsing, music, movies (DVDs), etc. (Total, they cost me around $650, mostly for the MacBook. Freecycle is wonderful, just in case you haven't heard of it.) I'm really only using the MacBook and eMac at this point, but I'd like to push more onto it and possibly the PowerMac and Dell.

  Read the article

• Apache+PHP on Windows Server 2008

  - by Álvaro G. Vicario

  I've installed Apache/2.2 and PHP/5.3 lots of times under Windows XP, Windows Vista and Windows Server 2003. The official *.msi installers work fine and configure everything. Now I need to install them into a Windows Server 2008 R2 Standard 64-bit box and I'm facing nothing but problems: There are no official 64 bit binaries for Apache and no binaries at all for PHP (official or third-party). It's alright, I'll do with good 32 bits, but it's kind of surprising. Official documentation is vague, generic and completely unaware of UAC or any recent Windows security feature. The PHP installer is unable to configure mod_php and the Apache installer is unable to configure... well, Apache. After three hours I've finally reached the point where I'm installing everything in the root folder and assigning full control access to all users in all files and directories and all I've got is a PHP-less Apache server that's able to serve static pages. So I guess it's time to stop and think. My question is: Has anyone installed an Apache+PHP production server under Windows Server 2008 in a serious, secure and reliable way and documented the whole process? Or should I just find a bundle like XAMPP and the like that requires no installation? === EDIT === I've installed Xampp Lite 1.7.3 and everything was working in 5 minutes. I'd still like to find some documentation about installing the original packages: XAMPP installs tons of stuff I don't need and offers no tool to enable and disable PHP extensions.

  Read the article

• Windows Media Player 12 Library import keeps dying

  - by duckworth

  I cannot get WMP 12 to import my library. I have searched around various forums and tried all the common solutions like disabling Media Sharing, deleted my %LOCALAPPDATA%\Microsoft\Media Player directory and tried reimporting, etc. but nothing works. I have even removed the Media features from Windows setup and re-added them. I have a large mp3 collection shared on the network from another Windows box. I add the folder (tried as a mapped drive and UNC path) and it begins importing. After about 30 minutes into the import (the CurrentDatabase_372.wmdb hits just under 400MB) my WMP player stops importing and all of the icons in WMP turn to red x's and my library is gone. I close and reopen WMP 12 and the library is empty and the CurrentDatabase_372.wmdb is small and it strarts importing again. Rinse, lather, repeat. I am going nuts as WMP11 on Vista handles this same setup perfectly. I am at my wits end on what else to try. I am running a legit Windows 7 Ultimate X64 RTM install. Here is a screenshot of what WMP12 looks like when the import dies: Any other ideas? Edit: OK, I Just confirmed this is definitely a problem not specific to my computer or configuration. I just did a clean installation of Windows 7 Ultimate x86 on an old test machine, opened WMP12 and added the same network folder of mp3's and it crashed about an hour into the import with the same appearance as the screenshot I posted above and the library disappears. So the problem has to be one of several things: The large size of the library The fact that the library is on the network A specific file or file is causing it the player to crash

  Read the article

• Extract large zip file (50 GB) on Mac OS X

  - by chingjun

  I was trying to move the files to another hard drive. So I archived all my photos in one large ZIP file using the Mac OS X built-in compress function. But the file failed to extract. I've tried many programs, but none of the programs I tried were able to extract the file. I've tried Mac OS X's extract utility, StuffIt Expander, 7-Zip (command line), all failed. Mac's archive utility and StuffIt don't seem to support large files, and 7-Zip's command line version gave an error stating unsupported archive. I have no luck in Windows either as many of my files have Chinese filenames, and couldn't extract to the correct name under Windows. Are there some programs that can support large files, can handle files compressed using Mac OS X's compress function, and can support UTF-8 filename? With or without GUI is fine. Update Well, I had made the wrong decision to compress the files, and it's already too late. I thought I should be able to extract the file if I could compress it. It's too late, the original copies are gone, only a large ZIP file left here. I have tried using 'unzip', but it says End-of-central-directory signature not found. I guess it doesn't have large file support as well. I would try the Windows Vista method as stated by SuperMagic, but I need to borrow a computer for that. Anyway, thank you everyone, but please provide more suggestions on what software that could possibly extract that file.

  Read the article

• Problem configuring virtual host.

  - by Zeeshan Rang

  I am tring to configure apache virtual host for my computer. But i am facing problem in doing so. i have made required changes in my C:\WINDOWS\system32\drivers\etc\hosts then C:\xampp\apache\conf\extra\httpd-vhosts.conf I added the following lines in httpd-vhosts.conf ########################Virtual Hosts Config below################## NameVirtualHost 127.0.0.1 <VirtualHost localhost> ServerName localhost DocumentRoot "C:\xampp\htdocs" DirectoryIndex index.php index.html <Directory "C:\xampp\htdocs"> AllowOverride All </Directory> </VirtualHost> <VirtualHost virtual.cloudse7en.com> ServerName virtual.cloudse7en.com DocumentRoot "C:\development\virtual.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost virtual.app.cloudse7en.com> ServerName virtual.app.cloudse7en.com DocumentRoot "C:\development\virtual.app.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.app.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> ######################################################################## I started my xampp and tried http://localhost in a browser. This works and open up http://localhost/xampp/ but when i try http:http://virtual.app.cloudse7en.com it again opens up http://virtual.app.cloudse7en.com/xampp/ I do not understand the reason. Also i have a windows vista 64 bit, operating system. Do i need to make some other changes too? Regards Zee

  Read the article

• Lag in Windows 7 with Zepto Znote 6224W

  - by Xink64

  Hi! Why does my Zepto Znote 6224W Laptop with Windows 7 make these small laggy moves whenever I use it? First I installed Windows 7 64 bit because of the memorycap in Windows 7 32 bit, but soon I realized that the system was lagging randomly. It was very annoying whenever I listened to music, because of the sudden lags. Then I tried everything with drivers; Chipset, Soundcard, Graphicscard, and so on. No luck. I then installed Windows 7 32 bit and this reduced the amount of lags but they are still here. I haven't tried bios upgrade since my bios should be newest according to now the now bankrupt Zepto company. My specifications: Zepto Znote 6224W Intel T8300 Intel Chipset PM965 PC-5300 4gb Nvidia 8600M GT Zepto's rebranded bios: Phoenix Technologies LTD Z14ND06 - Date: 12/20/2007 Harddrive: 320 GB 5400 RPM which I replaced with a Kingston SSDnow 40 GB. No luck either. I haven't tried Windows Vista on the machine though, but I would like to keep Windows 7.

  Read the article

• Plesk 10 - creating and using vhost.conf

  - by MrFidge

  I'm having some issues setting up and using a vhost.conf for one of my domains. So far none of the domains have required any extra configuration but now I need to use a PEAR module, so I'm looking to include /usr/share/pear in the PHP settings for the domain. vhost file created in /var/www/vhosts/domain.com/conf/vhost.conf <Directory /var/www/vhosts/domain.com/httpdocs> php_admin_value include_path ".:/usr/share/pear" </Directory> I then restart Plesk using: /usr/local/psa/admin/sbin/websrvmng --reconfigure-vhost --vhost-name=domain.com Or as plesk says that command is obsolete in Plesk 10 I've tried using /usr/local/psa/admin/sbin/httpdmng --reconfigure-domain domain.com And for good luck I've restarted apache too each time. Net result - none of the PEAR includes work unless I edit the include_path in /etc/php.ini! Any tips on how to get this MOFO working? I've had a look through the documentation but TBH I just don't have time to read 40 pages of Plesk manual for one line of code, this can't be that hard, surely! Thanks for any pointers, H

  Read the article

• Looking for a comprehensive/"expert" guide to BCD parameters

  - by Stilez

  I'm interested in educating myself about BCD on Windows 8. There are many, many "walkthrough" guides" and "howtos", but I can't find any guides at typical "enthusiast" level covering what each option or argument in a BCD /ENUM dump might mean, and the principles governing how these all work together. Imagine trying to rebuild or debug BCD (including EFI/BIOS variants and recovery/hibernate/memtest sections, and perhaps multiple boot Windows/WinPE/WinRE) from scratch using just BCDedit + DiskPart, and trying to understand rather than just copy/pasting commands. That's roughly the knowledge I'm after. Example questions might be: How is a BCD /ENUM dump to be read, item by item? How do its sections work together? (A lot of guides only show a specific example rather than explaining all the all common args that can exist and what they mean, they don't actually explain how sections work together, or they assume MBR/BIOS/Vista/7 and omit info needed for EFI/GPT/Dynamic disks/8) Partitions are specified by volume letter or as a \Device\HarddiskVolumeNNN. Why does it sometimes show these items as a letter and sometimes as a GUID? What are the practical differences if any? What exactly is syntax like "ramdisk=[C:]\Images\winpe.wim,{ramdiskoptions}" saying, and how will the drive letter "C" be interpreted at runtime in a line like this? Is the drive in such a line always "C:" (most examples assume so) and if not, when wouldn't it be? Many websites state that an sdi device and path may be needed in some sections of BCD, but what is sdi and what are these args doing when they appear? How does the GUID to HDD volume/partition mapping work under EFI/GPT? So that if disks or partitions/volumes change it's clear how one can confirm from basic principles whether data shown in BCD /ENUM ALL is still correct or not. Does anyone know of a suitable reference source for this kind of raw BCD data and structures? Thanks!

  Read the article

• Windows 7 - system error 5 problem

  - by Ian

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• How do I troubleshoot a segfault in Ubuntu that occurs when typing a bogus command?

  - by Alan

  We've got a production server running Ubuntu 11.10. We're encountering segfaults that appear under various conditions. The simplest reproducible case is when we login to an ssh session as our administrative user and enter a bogus command. You'd expect the standard "command not found" error message. Instead, we get a segfault in python. The user's default shell is /bin/bash. For example: $ asdf Segmentation fault Info from /var/log/syslog: Jul 6 15:39:20 PROD001 kernel: [2155960.605695] python[7873]: segfault at 0 ip (null) sp 00007fffd030b808 error 14 in python2.7[400000+233000] Some details about the server: $ uname -a Linux PROD001 3.0.0-16-server #29-Ubuntu SMP Tue Feb 14 13:08:12 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/issue Ubuntu 11.10 \n \l Before we ask the IT department to reinstall the O.S., I'd like to understand what got us here. The system and/or this particular user's environment is suspect. Many people have touched this server over the past year, so I'm wondering if it is missing libraries, incorrectly installed packages, etc. I'm hoping that if we can understand what's going wrong in this case, it will help explain why we're getting segfaults in a couple of other scenarios. Any tips on troubleshooting this segfault will be appreciated!

  Read the article

• Active Directory LDAP and user issues (using apache2 for svn access)

  - by CaCl

  I currently have a setup where I work that lets users use their active directory domain logins and passwords to authenticate and authorize access to Subversion. Currently I need to allow application accounts the same access. So our IT group creates application accounts in the active directory for us to use. But they want to be "secure" so they set the "Workstations Allowed" to be only a limited number of workstations. So when an application account hits the apache2 server for authentication they can't login for some reason and I'm having a heck of a time trying to debug. The error logs only show me: [Tue Apr 06 11:24:25 2010] [warn] [client 24.24.24.24] [3469] auth_ldap authenticate: user appuser13 authentication failed; URI /svn [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue Apr 06 11:24:25 2010] [error] [client 24.24.24.24] user appuser13: authentication failure for "/svn": Password Mismatch I've checked the password numerous times and it appears to be correct but I can't seem to get the user to authenticate properly. Below is a snippet of the apache configuration for ldap: # Auth providers # Active Directory <AuthnProviderAlias ldap ldap1> AuthBasicProvider ldap AuthLDAPURL "ldap://dmain.company.com:389/dc=dmain,dc=company,dc=com?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN "CN=svnuser13,OU=Application Accounts,dc=dmain,dc=teradata,dc=com" AuthLDAPBindPassword secret3 </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias ldap ldap2> AuthBasicProvider ldap AuthLDAPURL ldap://diffldapserver:389/dc=specialusers,dc=com?uid </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias file file1> AuthUserFile /var/svn/auth/htpasswd </AuthnProviderAlias> <Location /svn> DAV svn SVNPath /var/svn Satisfy Any Require valid-user AuthType Basic AuthName "SVN Repository" AuthBasicProvider ldap1 file1 ldap2 AuthzSVNAccessFile /var/svn/auth/access AuthzLDAPAuthoritative on Require valid-user </Location> Any help, like tips for debugging is appreciated!

  Read the article

< Previous Page | 319 320 321 322 323 324 325 326 327 328 329 330  | Next Page >