Search Results

Search found 9674 results on 387 pages for 'vista tips tweaks'.

Page 324/387 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

  • Computer loses all installed programs and appears to return OS-only state

    - by Jake
    This is a story regarding 3 laptops of different brand and models. On separate occassions, I configured each of these Windows 7 / Vista computers with the necessary configuration and applications (which are supposedly the same actually), e.g. join office domain, same windows updates, microft office etc. These machinese were configure in our office in Singapore, and then they were taken to India for use. Someday in India, when booting up the laptop, all went fine except when it reach the log in screen, it was no longer possible to login with domain credentials. Logging into the laptop local admin account will lead to discover that the machine has returned to "OS-only state". All the configurations and applications were gone. The actual user profiles are still in the C: drive so files can still be retrieved, but under Control Panel Uninstall Programs it is evident that at least the registry is corrupted. The above scenario happen to the first 2 laptops. For the third, the system reports "Operating System Not Found" on boot up. I cannot think of any reason except to suspect a power fluctuation issue. Question is, will a power issue create this behaviour? What else can cause this issue?

    Read the article

  • can't access SATA card config screen on boot, nor access the disks

    - by Ronald
    We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

    Read the article

  • PHP + MYSQL site perfomance

    - by Diego
    I have to manage a site which wasn't developed by me. It is in PHP using a mysql database, which is located in the web server. The site, sometimes (when the visitors increase too much) stops responding, or respond too slow. I have developed some sites in PHP but never took care of the management so really don't know where to start. The server (the hard) seems to be fine, when the web stops responding the cpu is being used at about 55% and has a lot of memory. I'm not asking someone to solve this issue. I only would really like if someone could give me a few tips about where can I find logs and how should I read and interpret them. So, that way I would be able to know if its the net traffic, the database (which queries), or what. Thanks! Update: Forgot to say: it is a Windows Server 2003. Note: I've recorded about a day with Jet Profiler. I don't really understand all the information it provides but there is one query which it marks as really slow. It makes sense because it is a select with a where clause which has three like condition. Initially I didn't include this in my question because when I run the query from MySQL Query Browser it doesn't take any long. It is under 0.01 seconds.

    Read the article

  • Best way to mount 3-4 monitor like this?

    - by jasondavis
    I just purchased 2 HP 2009m widescreen monitors, they are not the biggest thing on the block, they are like 19-20" and are only around 150-200$ so I think they are perfect. I bought 2 of them just to make sure I like them, with the full intention of purchasing more to make either a tripple or quad display. I now I am stuck trying to decide, if I purchase 1 more to have a tripple display I would then like to just wrap the third monitor to either the rigth or left side, I could do this without a mount most likely pretty easy. If I decide to go with 2 more monitors to make a quad display then I would like to add the 2 new monitor directly above the 2 that I have now. So it would make a grid of 2 wide and 2 high. I have posted a few photos belwo to show them now with the 2 I have, you will notice that I have them tilted inwards to make more of a "V" shape instead of them being side by side and "STRAIGHT". Now if I decide to make thegrid of 4 then I will need to buy or build a stand to hold them all tightly together (no whitespace or gap between the grid of monitors) but I would like to still have both rows invert to make the slight "V". Do you know of any existing stands I could purchase that would hold all 4 monitors without making them be STARIGHT without the "V" shape? Any tips appreciated please, also they do have holes in the back for VESA. a few photos... (they are from iphone and lighting made them note very good but you can see what I am working with here)

    Read the article

  • Windows Server 2003 with Apache and IIS causing random faulting and performance issues with Apache?

    - by contrebis
    I'm trying to fix a problem on a Windows Server 2003 SE install which is running IIS6 and Apache webserver (with PHP and MySQL). IIS sites are bound to one IP, Apache to the other. Everything seemed fine till the other IP address was installed to allow a webservice to run under IIS. Symptoms: Apache now responds very slowly, even requests for static files (often 30 seconds or more) Sporadic errors are appearing in the event logs like: Faulting application httpd.exe, version 2.2.14.0, faulting module php5ts.dll, version 5.2.13.13, fault address 0x000ac14f. I've double-checked the config files, taken account of this question/answer http://serverfault.com/questions/51230/running-iis-and-apache-on-the-same-windows-server, upped the Apache log level to debug, run TCPView to check for conflicting bindings, upgraded to latest Apache/PHP versions but still no success or indication of a cause. Any suggestions on where to look, or debugging tips would be gratefully received. I'm a web programmer so not so familiar with Windows Server admin or details of the networking stack. Running PHP under IIS is not an option and hosting on another server is non-ideal.

    Read the article

  • How do I create and conveniently search through Libraries in Windows 8?

    - by mtone
    In Windows 7, I took the habit of putting most of my frequently accessed disk areas as Libraries - there were about a dozen. Typing a word in the Start menu would then give me a summary of matches by Library. For example, searching for "WPF" would tell me that I've got some results in the Books library, in the Coding library and a few other PDFs in the Downloads library, one of which I could then expand to see all results within. In Windows 8, that functionality appears to be gone. The Search function in the Charms Bar lists tons of results by type (Documents, Pictures, et cetera) but not by Library. This is practically useless since Documents contains hundreds of .txt and .cs files, a few of which might be Books or Downloads. The only option I found is to go into Explorer and use the search bar in the Library section. However, there again, all search results are mixed together, and I can't seem to find a way to know which Library each result came from (in the Details view, I didn't find a Library column I could add). So, if I want to know which Library contains stuff about a given topic, I have to search the Libraries one by one. Very inconvenient. Is Microsoft slowly deprecating libraries? Any tips? How else can I search through libraries?

    Read the article

  • postgresql No space left on device

    - by pstanton
    Postgres is reporting that it is out of disk space while performing a rather large aggregation query: Caused by: org.postgresql.util.PSQLException: ERROR: could not write block 31840050 of temporary file: No space left on device at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:1592) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1327) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:192) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:451) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:350) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:304) at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:189) ... 8 more However the disk has quite a lot of space: Filesystem Size Used Avail Use% Mounted on /dev/sda1 386G 123G 243G 34% / udev 5.9G 172K 5.9G 1% /dev none 5.9G 0 5.9G 0% /dev/shm none 5.9G 628K 5.9G 1% /var/run none 5.9G 0 5.9G 0% /var/lock none 5.9G 0 5.9G 0% /lib/init/rw The query is doing the following: INSERT INTO summary_table SELECT t.a, t.b, SUM(t.c) AS c, COUNT(t.*) AS count, t.d, t.e, DATE_TRUNC('month', t.start) AS month, tt.type AS type, FALSE, tt.duration FROM detail_table_1 t, detail_table_2 tt WHERE t.trid=tt.id AND tt.type='a' AND DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')>=23 OR DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')<13 GROUP BY month, type, t.a, t.b, t.d, t.e, FALSE, tt.duration any tips?

    Read the article

  • Troubleshooting iptables and configuring it to drop the priority of long-term connections

    - by intuited
    I'm somewhat familiar with the general concepts of iptables, and would like to learn it in more detail. I'm hoping that my learning experience can also be useful. The situation: I'm running dd-wrt on my router. Despite its purported QoS skills, I'm still seeing connection latency shoot up hugely whenever there's an ongoing http connection, eg some large download. Under such conditions, it can take 10 seconds or more to load a basic webpage; sometimes the connections are dropped entirely. I've tried adjusting the parameters, dropping the allotted bandwidth for up and download to well under my limit, but nothing seems to work. dd-wrt is configured to use HTB as the QoS algorithm; HFSC, although presented as an option, seems to cause the router to crash, and is rumoured to not actually work on any linux system. I'd like to be able to troubleshoot this issue and hopefully improve the settings that dd-wrt is using, but I'm finding the learning curve a bit overwhelming. For starters I am not sure what HTB actually specifies: is this a set of iptables commands, or do some of those commands specify how HTB is to be used? I would like it to prioritize based on protocol the way that it already supposed to, and in addition I'd like to have it drop the priority of connections which have a high total byte count, say over 400KB. Also tips on utilities that can be run under dd-wrt to get more info on what's going on in there are appreciated. I've tried to get iftop to work but there were issues running curses. I'm leaning towards replacing dd-wrt with openwrt; comments on this strategy are also welcome. I suspect that I would be well advised to get a second router as a standin before trying that. It may be worth noting that my total bandwidth is pretty limited (256Kbit/s).

    Read the article

  • XAMPP CURL not working!

    - by MiffTheFox
    Nope, it's not. Windows Vista Home Premium x32: Relevant section of php.ini: ; Windows Extensions ; Note that ODBC support is built in, so no dll is needed for it. ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) ; extension folders as well as the separate PECL DLL download (PHP 5). ; Be sure to appropriately set the extension_dir directive. ;extension=php_apc.dll ;extension=php_apd.dll ;extension=php_bcompiler.dll ;extension=php_bitset.dll ;extension=php_blenc.dll ;extension=php_bz2.dll ;extension=php_bz2_filter.dll ;extension=php_classkit.dll ;extension=php_cpdf.dll ;extension=php_crack.dll extension=php_curl.dll ;extension=php_cvsclient.dll ;extension=php_db.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_dbx.dll Proof it's not working: c:\users\miff>curl http://localhost/xampp/phpinfo.php | grep curl % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 62592 0 62592 0 0 1971k 0 --:--:-- --:--:-- --:--:-- 3319k <tr><td class="e">HTTP_USER_AGENT </td><td class="v">curl/7.16.3 (i686-pc-cygwin) libcurl/7.16.3 OpenSSL/0.9.8k zlib/1.2.3 libssh2/0.15-CVS </td></tr> <tr><td class="e">User-Agent </td><td class="v">curl/7.16.3 (i686-pc-cygwin) libcurl/7.16.3 OpenSSL/0.9.8k zlib/1.2.3 libssh2/0.15-CVS </td></tr> <tr><td class="e">_SERVER["HTTP_USER_AGENT"]</td><td class="v">curl/7.16.3 (i686-pc-cygwin) libcurl/7.16.3 OpenSSL/0.9.8k zlib/1.2.3 libssh2/0.15-CVS</td></tr> c:\users\miff>

    Read the article

  • How can I restore my original IME Romaji input settings?

    - by JOhn K
    the this one, Japanese IME on Windows: switch back to romaji input method (3) did not help. The problem seems the same. My Vista home premium version PC, I had been using Microsoft IME to use English and Japanese input using romaji henkan for a long time. One day, all of a sudden, first when I started up the PC, it has cap lock indicator ON. So, I press SHIFT key, CAP lock indicator is off!(This I have to do every morning.) Now when I want to type romaji input to change to Japanese, I switch EN English (United States) to "JP Japanese (Japan) and select input to hiragana input. It worked until that day. But now when I set to input romaji for hiragana as I used to do and start typing, then it shows Japanese hiragana directly on the display just as keyboard setting as Japanese ???109???????? as shown in Wikipedia JIS keyboard. And I cannot show hiragana as I wanted ( I can convert to Kanji OK) etc. by hitting space key. But its key board arrangement is what I never learned. Other thing I found is when I hit "`" key, it switches between hiragana and alphabet. When I see Control panel setting it is the same setting as I have seen. Please suggest me a solution to get the original setting for IME input mode as I used to do. John K.

    Read the article

  • What configuration changes can I make to speed up extremely slow Windows VM's in ESXi 4.0.

    - by Shawn Anderson
    I've recently moved from VMWare Server to ESXi 4.0. Running on Dell T310. My VM's have been restored but they are running dog slow compared to VMWare Server. I loaded ESXi 4.0 using only default values. Where are some areas where I can tweak the performance? Even logging onto the VM's can be extremely sluggish. Trying to install software on any of them is a new experience in pain. Dell PowerEdge T310 Xeon X3460 2.80 GHz 32 GB RAM 1 HD (2 TB) I have 16 VM's on this server, but only six or so will be running during my testing. I keep an eye on the Resource Allocation and Performance tabs for the host and I never see CPU or RAM getting anywhere close to pegged. Events tab does show some notices for video RAM issues and some hints on Windows activation issues, but nothing that would point to the sort of sluggishness that I'm experiencing. 1 Windows Server 2008 R2 (64-bit) - 4 GB RAM 1 Windows 7 (32-bit) - 2 GB RAM 1 Vista (32-bit) - 1 GB RAM 3 XP (32-bit) - 1 GB RAM Over to you! Thanks - Shawn

    Read the article

  • Is Windows Server 2008R2 NAP solution for NAC (endpoint security) valuable enough to be worth the hassles?

    - by Warren P
    I'm learning about Windows Server 2008 R2's NAP features. I understand what network access control (NAC) is and what role NAP plays in that, but I would like to know what limitations and problems it has, that people wish they knew before they rolled it out. Secondly, I'd like to know if anyone has had success rolling it out in a mid-size (multi-city corporate network with around 15 servers, 200 desktops) environment with most (99%) Windows XP SP3 and newer Windows clients (Vista, and Win7). Did it work with your anti-virus? (I'm guessing NAP works well with the big name anti-virus products, but we're using Trend micro.). Let's assume that the servers are all Windows Server 2008 R2. Our VPNs are cisco stuff, and have their own NAC features. Has NAP actually benefitted your organization, and was it wise to roll it out, or is it yet another in the long list of things that Windows Server 2008 R2 does, but that if you do move your servers up to it, you're probably not going to want to use. In what particular ways might the built-in NAP solution be the best one, and in what particular ways might no solution at all (the status quo pre-NAP) or a third-party endpoint security or NAC solution be considered a better fit? I found an article where a panel of security experts in 2007 say NAC is maybe "not worth it". Are things better now in 2010 with Win Server 2008 R2?

    Read the article

  • Windows 7 Users unable to add Windows 2003 server printers

    - by TravBrack
    Hi there I just rolled out a few Windows 7 x64 machines and ran into this issue where non-admin users are unable to add printers hosted on a windows 2003 server. It works fine on a 2008 server. The issue appears to be with the point and print system. A user will attempt to add the printer, a prompt will come up requiring the user to elevate privileges in order to install a driver, and will fail citing 'access denied'. I found the group policy setting Point and Print Restrictions: When the policy setting is disabled: -Windows Vista computers will not show a warning or an elevated command prompt when users create a printer connection to any server using Point and Print. So I disabled it, verified that the policy was being picked up using rsop, but it still does the same thing. I've also tried the following: Recreating the printers using newer drivers Adding the printer using 32 bit drivers on the 2003 machine, then adding the 64 bit drivers on a Windows 7 machine Adding the printer from a windows 7 machine using print management None of these things work. The security settings are no different than the working printers. Help?

    Read the article

  • Automatically install driver on headless WHSv1 system

    - by Dan Neely
    I have one of the HP Mediasmart Windows Home Server v1 boxes. It's network port appears to have died a few days ago but the system is not giving any other sign of failure: No activity lights activate on either side of the cable when connected to my gigabit switch; when connected to one of my routers 100 megabit ports the lights turn on but it remains unreachable over the network and my router never lists it as among DHCP clients. I bought a USB-ethernet adapter to temporarily get it back online; but the adapter needs a driver to work which I can't install because the system is headless by design (no video out, no PCI/PCIe slots) with admin access only available via the WHS client or remote desktop. Both of those options require network connectivity and are consequently unavailable. I tried copying the drivers to a flash drive; but Windows either didn't look there or none of the drivers provided were suitable (Win8, Win7, or combined XP and Vista). I've been told that a USB WiFi adapter would have the same driver problem.

    Read the article

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • Windows 7 BSOD Crashes

    - by Shane Andrade
    I recently upgraded to Windows 7 64 doing a clean install from Vista 64 and ever since I keep getting random blue screen crashes. I have the feeling it's caused by my video card but everything has the most up-to-date drivers for Windows 7 64 bit. Here is the memory dump from my most recent crash: MEMORY_MANAGEMENT (1a) # Any other values for parameter 1 must be individually examined. Arguments: Arg1: 0000000000041790, The subtype of the bugcheck. Arg2: fffffa8001990b90 Arg3: 000000000000ffff Arg4: 0000000000000000 Debugging Details: ------------------ PEB is paged out (Peb.Ldr = 000007ff`fffd9018). Type ".hh dbgerr001" for details PEB is paged out (Peb.Ldr = 000007ff`fffd9018). Type ".hh dbgerr001" for details BUGCHECK_STR: 0x1a_41790 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: csrss.exe CURRENT_IRQL: 0 LAST_CONTROL_TRANSFER: from fffff80002cff26e to fffff80002c8cf00 STACK_TEXT: fffff880`0299ae38 fffff800`02cff26e : 00000000`0000001a 00000000`00041790 fffffa80`01990b90 00000000`0000ffff : nt!KeBugCheckEx fffff880`0299ae40 fffff800`02cc05d9 : fffffa80`00000000 00000000`01e73fff 00000000`00000000 fffff960`0023653f : nt! ?? ::FNODOBFM::`string'+0x339d6 fffff880`0299b000 fffff800`02fa2e50 : fffffa80`09140c90 0007ffff`00000000 00000000`00000000 00000000`00000000 : nt!MiRemoveMappedView+0xd9 fffff880`0299b120 fffff960`002e381b : fffff900`00000000 fffffa80`07c85d10 00000000`00000001 fffff900`c1e56cd0 : nt!MiUnmapViewOfSection+0x1b0 fffff880`0299b1e0 fffff960`002b4fc1 : 00000000`00000000 fffff900`00000000 fffff900`c1e56cd0 00000000`00000000 : win32k!SURFACE::bUnMapImmediate+0x5b fffff880`0299b210 fffff960`002b527b : fffff900`c07fdd10 fffff8a0`00000000 00000000`00000000 00000000`00000000 : win32k!bMigrateSurfaceForConversion+0x5ad fffff880`0299b340 fffff960`002dc3e3 : fffff900`00000000 fffff900`c1e5c010 00000000`00000000 00000000`00000000 : win32k!pConvertDfbSurfaceToDibInternal+0x1cb fffff880`0299b420 fffff960`002b5319 : fffffa80`07c7f470 00000000`00000001 00000000`00000000 00000000`00000282 : win32k!MulConvertChildRedirectionDfbSurfaceToDib+0x53 fffff880`0299b460 fffff960`002b1267 : fffff900`c0132010 fffff900`c0132010 00000000`00000000 00000000`00000000 : win32k!pConvertDfbSurfaceToDib+0x41 fffff880`0299b490 fffff960`002b1b1f : fffff900`c0132010 00000000`00000001 fffff900`c24cc280 fffff900`c0132010 : win32k!bDynamicRemoveAllDriverRealizations+0x4f fffff880`0299b4c0 fffff960`00273bb9 : 00000000`00000000 fffff900`00000000 fffff900`00000000 00000000`00000000 : win32k!bDynamicModeChange+0x1d7 fffff880`0299b5a0 fffff960`000baa2d : 00000000`00000000 00000000`00000000 00000000`00000000 07cd8220`00000003 : win32k!DrvInternalChangeDisplaySettings+0xc7d fffff880`0299b7e0 fffff960`001a2c41 : 00000000`00000040 fffff900`c00bf010 00000000`00000000 07cd8220`00000003 : win32k!DrvChangeDisplaySettings+0x62d fffff880`0299b9c0 fffff960`001a2e9e : fffffa80`07cd8220 00000000`00000000 00000000`00000000 fffff800`02f6fec3 : win32k!xxxInternalUserChangeDisplaySettings+0x329 fffff880`0299ba80 fffff960`001a033a : 00000000`00000000 00000000`00000000 00998b21`81a100b6 00000000`00000040 : win32k!xxxUserChangeDisplaySettings+0x92 fffff880`0299bb70 fffff960`001a053a : 00000000`00000000 00000000`00000001 00000000`00000000 00000000`00000000 : win32k!xxxRemoteSetDisconnectDisplayMode+0x42 fffff880`0299bbb0 fffff960`00183ea6 : 00000000`00000000 fffffa80`06efeb60 fffff880`0299bca0 00000000`00000005 : win32k!xxxRemoteDisconnect+0x1c2 fffff880`0299bbf0 fffff800`02c8c153 : fffffa80`06efeb60 00000000`00000005 00000000`00000020 00000000`00000000 : win32k!NtUserCallNoParam+0x36 fffff880`0299bc20 000007fe`fd6b3d3a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 00000000`027cf798 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7fe`fd6b3d3a STACK_COMMAND: kb FOLLOWUP_IP: win32k!SURFACE::bUnMapImmediate+5b fffff960`002e381b f6477401 test byte ptr [rdi+74h],1 SYMBOL_STACK_INDEX: 4 SYMBOL_NAME: win32k!SURFACE::bUnMapImmediate+5b FOLLOWUP_NAME: MachineOwner MODULE_NAME: win32k IMAGE_NAME: win32k.sys DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc5e0 FAILURE_BUCKET_ID: X64_0x1a_41790_win32k!SURFACE::bUnMapImmediate+5b BUCKET_ID: X64_0x1a_41790_win32k!SURFACE::bUnMapImmediate+5b Followup: MachineOwner

    Read the article

  • How do I SSH tunnel using PuTTY or SecureCRT through gateway/proxy to development server?

    - by DAE51D
    We have some unix boxes setup in a way that to get to the development box via ssh, you have to ssh into a 'user@jumpoff' box first. There is no direct connection allowed on 'dev' via ssh from anywhere but 'jumpoff'. Furthermore, only key exchange is allowed on both servers. And you always login to the development box as 'build@dev'. It's painful to always do that hopping. I know this can be done with SOCKS or a Tunnel or something... I have setup a FreeBSD VM and I can get things to work awesome using unix ssh tools. Basically all I do is make sure my vm's ~/.ssh/id_rsa.pub key is on both jumpoff and dev and use this ~/.ssh/config file: # Development Server Host ext-dev # this must be a resolvable name for "dev" from Jumpoff Hostname 1.2.3.4 User build IdentityFile ~/.ssh/id_rsa # The Jumpoff Server Host ext Hostname 1.1.1.1 User daevid Port 22 IdentityFile ~/.ssh/id_rsa # This must come below all of the above Host ext-* ProxyCommand ssh ext nc $(echo '%h'|cut -d- -f2-) 22 Then I just simply type "ssh ext-dev" and I'm in like Flynn. The problem is I can't get this same thing to work using either PuTTY or SecureCRT -- and to be honest I've not found any tutorials that really walk me through it. I see many on setting up some kind of proxy tunnel for Firefox, but it doesn't seem to be the same concept. I've been messing with various trial and error most all day and nothing has worked (obviously) and I'm at the end of my ssh knowledge and Google searching. I found this link which seemed to be perfect, but it doesn't work for me. The "Master" connects fine, but the "client" portion doesn't connect. It tells me, the remote system refused the connection. http://www.vandyke.com/support/tips/socksproxy.html I've got the VM, PuTTY and SecureCRT all using the same public/private key pairs to make things consistent and easier to debug. Does anyone have a straight up example of how to do this in Windows?

    Read the article

  • How to generate thumbnails for less common video containers (mkv, ogm, mp4, flv, rmvb and mov) in wi

    - by fluxtendu
    So how to generate thumbnails for these containers? I know that the install of "DivX Plus Tech Preview: MKV on Windows 7" does it for MKV. But I think that only some registry changes are really necessary and I want it for other containers. If it's possible to avoiding the install of (always bloated) codecs packs it would be nice... Maybe only installing ffdshow or essential and separated codecs. (some time ago I have try reg files for vista without success...) Update: I have installed Win7codecs & tweaked a little its settings and I got almost everything I want. (I have also re-installed the relevant part of the divx plus tech preview to get something else than an all black preview for MKV) Issues that I still want to resolve: Find a cleaner & lighter method Almost all my rmvb and mov files got an all black preview (installing real media/quick time alternative doesn't help, is it the same with the officials?) With almost all containers (avi, mkv, ogm, mpg), I have (few) random files that don't get the preview. I could play them in WMP or another player and don't have found a pattern in the codecs used. All wmv, flv and mp4 have previews but I have less files in these containers. (I clear my thumbnails cache to test them) More generally I would like to understand how windows handle the containers & codecs to generate the previews. And a software that let me choose arbitrarily the pictures previewed would be convenient too

    Read the article

  • Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

    - by Archit Baweja
    Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

    Read the article

  • Keyboard's media keys are blocked by a program

    - by Mike Hanson
    I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

    Read the article

  • .htm pages working but .aspx pages throwing errors

    - by Mike
    Our site has thousands of visitors per day but we've been receiving reports from some of our members that they are able to hit our main page, presumably because it's a .htm page, but when they click off to a .aspx page, they get an error. I've done as much research as I know how and here is what I have come up with: - We have not made any changes to IIS on our server in months. - We have a couple of customers that have been willing to work with us and provide information about their system. One customer is running Vista, the other is running XP. - We had one of the customers test both Firefox and MSIE. She gets same error in both. - One customer said, "We were able to post the profile and searched on available jobs and it worked w/ Firefox for a day, then it just quit working...we did not change any settings to Firefox after we posted the profile." - We asked the customer to clear their cache and try again. They responded with, "We just cleared the cache and got the same error; btw, I periodically clear the cache -- almost every day." Summary We have thousands of customers that hit our site with no problem. We can't reproduce these errors. These customers are getting the same error in different browsers. They are only getting the error on .aspx pages. They still get the error after clearing their cache. We would appreciate any thoughts on what other questions we could ask these customers or thoughts on how we can further troubleshoot this problem.

    Read the article

  • Hardening non-root standalone Linux Tomcat install

    - by NoozNooz42
    I want to know if you have any tips as to how to strengthen the security of a non-root install of Tomcat in standalone mode once Tomcat is already installed in a non-root account, in standalone mode. I precise this because, for example, I'm not at all interested by the answers given here (because both Java and Tomcat requires root priviledges there to be installed and I've got zero interest in running jsvc): http://serverfault.com/questions/43765 So far, here's what I've done for my non-root standalone Tomcat 6 install: download and install the JRE .bin provided by Oracle/Sun (no need to be root here) (no need for a full JDK anymore right seen that Jasper [Tomcat's JSP engine] has its own compiler now right?) download and tar -xzf tomcat 6 (no need to be root here) set up transparent port-forwarding (must be root here) Note that my distribution is a Debian one and I have exactly zero interest in downloading Debian package / backports / whatever... Because, once again, I DO NOT want to need to be root to install Java & Tomcat. The only moment I needed to be root was to configure the firewall to transparently do the port forwarding 80 <-- 8080 and 443 <-- 8443. I then deleted all the default webapps but one: cd ~/apache-tomcat-6.0.26/webapps rm -rf docs rm -rf examples/ rm -rf manager/ rm -rf ROOT/ What about the directory ~/apache-tomcat-6.0.26/webapps/host-manager, do I need it or can I delete it? So, once I've installed Tomcat standalone in a non-root account (and taken into account that I don't want to enter the root password anymore and that I don't plan to install the whole Apache shebang), what more can I do? Are there connectors I can disable? (how?)

    Read the article

  • How to disable auto insert notification in Windows 7?

    - by White Phoenix
    Alright, here's the problem. My hard drive activity light on my custom built PC is blinking exactly once every second. Microsoft has this to say on the issue: http://support.microsoft.com/kb/138598 There has been discussion on this issue several months ago: Why does my hard drive LED light blink every second? The problem seems to stem from primarily Windows 7 polling the CD-ROM/DVD drive every second to see if something is inserted. The Windows 7 users in the thread that was linked in the superuser question, https://social.technet.microsoft.com/Forums/fi-FI/w7itprohardware/thread/4f6f63b3-4b58-4154-9298-1566100f9d00, have confirmed that this IS a known issue with Windows 7. Some people point at the motherboard circuitry causing the CD-ROM and SATA activity to both be linked to that hard drive activity, but whatever the case, the temporary solution seems to be to disable the CD/DVD-ROM drive in Device Manager. In fact, disabling the CD/DVD-ROM does stop the blinking, but of course this solution is counterproductive, because I shouldn't have to entirely disable a device to fix this problem. I've done the following suggestions in that thread: Change the autorun registry entry to 0 Completely disable autoplay in the autoplay control panel Disable autoplay in the Local Group Policy Editor. None of these stop the blinking from happening - apparently these solutions work for both XP and Vista, but it seems to be different in Windows 7. So I'm wondering if anyone has found out how to completely disable the polling in Windows 7, or if this will just have to be an issue we will have to deal with. There's no option to disable the auto insert notification when you go to the device within device manager (there was in XP), so I got no idea where this option is hidden, or if there's a registry key entry I could change to stop the polling. Anyone have any idea?

    Read the article

  • Ventrilo sound delay issue in Windows 7

    - by TM
    I've upgraded my machine to Windows 7 Professional (x64) (using format + clean install, not upgrade install). Everything seems to work fine except for Ventrilo. I used to have Vista Business x64 and Ventrilo worked fine there, on the same machine. The issue I am having is that when I am playing a game and using Ventrilo, everything works fine at first, but after a few minutes, I stop hearing anything that people say. If I minimize, I can see the speaker icons lighting up (meaning that people are talking), but I still can't hear anything. The sounds from the game and other OS sounds still play through the speakers just fine. Eventually, I will close ventrilo and then after a few seconds I will start hearing things that people were saying several minutes ago. I start hearing everything that was said, with no "silent time" in between. Note that the sounds keep playing even AFTER the ventrilo process is dead. I've tried using Ventrilo x64 and x86 versions. Does anyone have any advice on how to fix this problem?

    Read the article

  • Upgrade Debian to unstable on VirtualBox: udev problem

    - by Ken
    I'm running Debian stable on VirtualBox on Windows Vista 64-bit Ultimate. It's been running great, but I needed some newer packages, so I put sid in my sources.list to upgrade to unstable (as I've done a dozen times on various Linux boxes over the years). When I upgraded, something went screwy and it asked me to run apt-get -f install to fix them, which gave this: (Reading database ... 77846 files and directories currently installed.) Preparing to replace udev 0.125-7+lenny3 (using .../archives/udev_151-3_amd64.deb) ... Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel. Please upgrade your kernel before or while upgrading udev. AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you understand what you are doing! dpkg: error processing /var/cache/apt/archives/udev_151-3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current start runlevel(s) (2 3 4 5) of script `vboxadd-x11' overwrites defaults (empty). insserv: warning: current stop runlevel(s) (0 1 6) of script `vboxadd-x11' overwrites defaults (empty). Errors were encountered while processing: /var/cache/apt/archives/udev_151-3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I have the VirtualBox extensions installed, and it looks like the udev install doesn't know what to make of them. But I don't know exactly where/how they're installed (I just ran the VBoxLinuxAdditions-amd64.run script, basically), so I don't know how to disable them. Any ideas? Thanks!

    Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >