Search Results

Search found 10225 results on 409 pages for 'intel syntax'.

Page 324/409 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• Ubuntu Linux won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• An Unstoppable Force!

  - by TammyBednar

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Building a high-availability database platform presents unique challenges. Combining servers, storage, networking, OS, firmware, and database is complicated and raises important concerns: Will coordination between multiple SME’s delay deployment? Will it be reliable? Will it scale? Will routine maintenance consume precious IT-staff time? Ultimately, will it work? Enter the Oracle Database Appliance, a complete package of software, server, storage, and networking that’s engineered for simplicity. It saves time and money by simplifying deployment, maintenance, and support of database workloads. Plus, it’s based on Intel Xeon processors to ensure a high level of performance and scalability. Take a look at this video to compare Heather and Ted’s approach to building a server for their Oracle database! http://www.youtube.com/watch?v=os4RDVclWS8 If you missed the “Compare Database Platforms: Build vs. Buy” webcast or want to listen again to find out how Jeff Schulte - Vice President at Yodlee uses Oracle Database Appliance.

  Read the article

• Why Java's JMF doesn't work in Linux?

  - by Visruth CV

  I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

  Read the article

• TechEd 2010 Day Three: The Database Designer (Isn't)

  - by BuckWoody

  Yesterday at TechEd 2010 here in New Orleans I worked the front-booth, answering general SQL Server questions for the masses. I was actually a little surprised to find most of the questions I got were from folks that wanted to know more about Stream Insight and Master Data Services. In past conferences I've been asked a lot of "free consulting" questions, about problems folks have had from older products. I don't mind that a bit - in fact, I'm always happy to help in any way I can. But this time people are really interested in the new features in the product, and I like that they are thinking ahead, not just having to solve problems in production. My presentation was on "Database Design in an Hour". We had the usual fun, and SideShow Bob made an appearance - I kid you not. The guy in the back of the room looked just like Sideshow Bob, so I quickly held a "bes thair" contest, and he won. Duing the presentation, I explain the tools you can use to design databases. I also explain that the "Database Designer" tool in SQL Server Management Studio (SSMS) isn't truly a desinger - it uses non-standard notation, doesn't have a meta-data dictionary, and worst of all, it works at the physical level. In other words, whatever you do in SSMS will automatically change the field/table/relationship structures in the database. We fixed this in SSMS 2008 and higher by adding an option to block that, but the tool is not a good design function nonetheless. To be fair, no one I know of at Microsoft recommends that it is - but I was shocked to hear so many developers in the room defending it as a good tool. I think the main issue for someone who doesn't have to work with Relational Systems a great deal is that it can be difficult to figure out Foreign Keys. The syntax makes them look "backwards", so it's just easier to grab a field and place it on the table you want to point to. There are options. You can download a couple of free tools (CA has a community edition of ER-WIN, Quest has one, and Embarcadero also has one) and if you design more than one or two databases a year, it may be worth buying a true design tool. For years I used Visio, but we changed it so that it doesn't forward-engineer (create the DDL) any more, so it isn't a true design tool either. So investigate those free and not-so-free tools. You'll find they help you in your job - but stay away from the Database Designer in SSMS. Or I'll send Sideshow Bob over there to straighten you out. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

  - by Chas

  Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• RadioButtons and Lambda Expressions

  - by MightyZot

  Radio buttons operate in groups. They are used to present mutually exclusive lists of options. Since I started programming in Windows 20 years ago, I have always been frustrated about how they are implemented. To make them operate as a group, you put your radio buttons in a group box. Conversely, to group radio buttons in HTML, you simply give them all the same name. Radio buttons with the same name or ID in HTML operate as one mutually exclusive group of options. In C#, all your radio buttons must have unique names and you use group boxes to group them. I’m in the process of converting some old code to C# and I’m tasked with creating a user control with groups of radio buttons on it. I started out writing the traditional switch…case statements to check the appropriate radio button based upon value, loops to uncheck them all, etc. Then it occurred to me that I could stick the radio buttons in a Dictionary or List and use Lambda expressions to make my code a lot more maintainable. So, here is what I ended up with: Here is a dictionary that contains my list of radio buttons and their values. I used their values as the keys, so that I can select them by value. Now, instead of using loops and switch…case statements to control the radio buttons, I use the lambda syntax and extension methods. Selecting a Radio Button by Value This code is inside of a property accessor, so “value” represents the value passed into the property accessor. The “First” extension method uses the delegate represented by the lambda expression to select the radio button (actually KeyValuePair) that represents the passed in value. Finally, the resulting checkbox is checked. Since the radio buttons are in the same group, they function as a group, the appropriate radio button is selected while the others are unselected. Reading the Value This is the get accessor for the property that returns the value of the checked radio button. Now, if you’re using binding, this code is likely not necessary; however, I didn’t want to use binding in this case, so I think this is a good alternative to the traditional loops and switch…case statements.

  Read the article

• MySQL Workbench 6.2.1 BETA has been released

  - by user12602715

  The MySQL Workbench team is announcing availability of the first beta release of its upcoming major product update, MySQL  Workbench 6.2. MySQL Workbench 6.2 focuses on support for innovations released in MySQL 5.6 and MySQL 5.7 DMR (Development Release) as well as MySQL Fabric 1.5, with features such as: A new spatial data viewer, allowing graphical views of result sets containing GEOMETRY data and taking advantage of the new GIS capabilities in MySQL 5.7. Support for new MySQL 5.7.4 SQL syntax and configuration options. Metadata Locks View shows the locks connections are blocked or waiting on. MySQL Fabric cluster connectivity - Browsing, view status, and connect to any MySQL instance in a Fabric Cluster. MS Access migration Wizard - easily move to MySQL Databases. Other significant usability improvements were made, aiming to raise productivity for advanced and new users: Direct shortcut buttons to commonly used features in the schema tree. Improved results handling. Columns have better auto-sizing and their widths are saved. Fonts can also be customized. Results "pinned" to persist viewing data. A convenient Run SQL Script command to directly execute SQL scripts, without loading them first. Database Modeling has been updated to allow changes to the formatting of note objects and attached SQL scripts can now be included in forward engineering and synchronization scripts. Integrated Visual Explain within the result set panel. Visual Explain drill down for large to very large explain plans. Shared SQL snippets in the SQL Editor, allowing multiple users to share SQL code by storing it within a MySQL instance. And much more. The list of provided binaries was updated and MySQL Workbench binaries now available for: Windows 7 or newer Mac OS X Lion or newer Ubuntu 12.04 LTS and Ubuntu 14.04 Fedora 20 Oracle Linux 6.5 Oracle Linux 7 Sources for building in other Linux distributions For the full list of changes in this revision, visit http://dev.mysql.com/doc/relnotes/workbench/en/changes-6-2.html For discussion, join the MySQL Workbench Forums: http://forums.mysql.com/index.php?151 Download MySQL Workbench 6.2.1 now, for Windows, Mac OS X 10.7+, Oracle Linux 6 and 7, Fedora 20, Ubuntu 12.04 and Ubuntu 14.04 or sources, from: http://dev.mysql.com/downloads/tools/workbench/ On behalf of the MySQL Workbench and the MySQL/ORACLE RE Team.

  Read the article

• High-Powered Sites for low Cost

  - by HighAltitudeCoder

  Ahh, I am experiencing the intimidation of my very first post - visible by the whole world. Ok, here goes.   This first post is nothing exceptional.  It is simply a recommendation based (fittingly, I suppose) upon the job search you may be gearing up for.  I find myself in this very situation right now.  And, I will take my own recommendation after posting this entry. Job-Seekers: To the left you will notice two links under "Recommended Learning".  I have found these links to be invaluable when it comes to re-tooling, re-familiarizing, or otherwise resharping my skills when looking for that next job. Often, you will find job-postings with the text, usually posted after a laborious list of qualifications indicating the company's desire to hire candidates who know what they are doing: "...Looking for a candidate who can hit the ground running...".  The interesting thing about this post to me is I've encountered many individuals who, after speaking and working with them for some time, I've realized are perfectly capable of hitting the ground running - and FAST.  But what if they speed off in the wrong direction? The next time you spearhead a major task in your job, ask yourself: Am I headed in the wrong direction?  There are many ways to do this.  In fact, I've found in this new field there are more tempting ways to steer your project in the wrong direction than there are good ones.  I don't want to suggest that every one of my posts will fall into the "right direction" category, however I do think a healthy dose of introspection of the pros and cons will always be beneficial before you set off. That said, allow me to expound on the previously mentioned links. These web sites are invaluable.  They demonstrate the capabilities of existing as well as new and upcoming tools available in several IDE's.  I've viewed many tutorials in LearnVisualStudio.NET, and only one or two so far in TrainingSpot, however I've been delighted in their simplicity and straightforward approach to proper usage of the particular tool or concept being discussed.  They have not (so far in my experience) demonstrated ways in which to use the tools that become cumbersome, impractical, or error-prone. Each website has step-by-step videos that can be paused, replayed, and most importantly, they are done in real time.  As the author is typing, the viewer gets to experience the coding experience from a first-person perspective, including syntax errors, unexpected behaviors, IDE setup idiosyncracies, everything.  A subtle value I've gained from these videos is that a certain degree of confusion and introspection is normal when working with new tools and exploring new paths.  They (as well as your own experience) are not to be feared, but enjoyed.  I highly recommend them. Good work, guys!

  Read the article

• Is this a pattern? Should it be?

  - by Arkadiy

  The following is more of a statement than a question - it describes something that may be a pattern. The question is: is this a known pattern? Or, if it's not, should it be? I've had a situation where I had to iterate over two dissimilar multi-layer data structures and copy information from one to the other. Depending on particular use case, I had around eight different kinds of layers, combined in about eight different combinations: A-B-C B-C A-C D-E A-D-E and so on After a few unsuccessful attempts to factor out the repetition of per-layer iteration code, I realized that the key difficulty in this refactoring was the fact that the bottom level needed access to data gathered at higher levels. To explicitly accommodate this requirement, I introduced IterationContext class with a number of get() and set() methods for accumulating the necessary information. In the end, I had the following class structure: class Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const = 0; }; class RecursingIterator : public Iterator { RecursingIterator(const Iterator &below); }; class IterateOverA : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // Iterate over members in dataStructure1 // locate corresponding item in dataStructure2 (passed via context) // and set it in the context // invoke the sub-iterator }; class IterateOverB : public RecursingIterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // iterate over members dataStructure2 (form context) // set dataStructure2's item in the context // locate corresponding item in dataStructure2 (passed via context) // invoke the sub-iterator }; void main() { class FinalCopy : public Iterator { virtual void iterateOver(const Structure &dataStructure1, IterationContext &ctx) const { // copy data from structure 1 to structure 2 in the context, // using some data from higher levels as needed } } IterationContext ctx(dateStructure2); IterateOverA(IterateOverB(FinalCopy())).iterate(dataStructure1, ctx); } It so happens that dataStructure1 is a uniform data structure, similar to XML DOM in that respect, while dataStructure2 is a legacy data structure made of various structs and arrays. This allows me to pass dataStructure1 outside of the context for convenience. In general, either side of the iteration or both sides may be passed via context, as convenient. The key situation points are: complicated code that needs to be invoked in "layers", with multiple combinations of layer types possible at the bottom layer, the information from top layers needs to be visible. The key implementation points are: use of context class to access the data from all levels of iteration complicated iteration code encapsulated in implementation of pure virtual function two interfaces - one aware of underlying iterator, one not aware of it. use of const & to simplify the usage syntax.

  Read the article

• Why doesn't Ubuntu detect my second hard drive?

  - by user93179

  I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

  Read the article

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• Working with Windows and Unix

  - by user554629

  Beware of new line characters One of the most frequent issues we encounter in Tech Support is the corruption of files that are transferred between Windows and Unix.   The transfer can occur at any stage, but ultimately involves a transfer of a file using an ftp client that is running on Windows;  it could be ftp or filezilla. Windows uses two characters to mark the end of a line in a text file (CR/LF),carriage return, linefeed.   Unix uses a single character (CR). In all situations, it is best to use binary mode transfer for all files, including ascii text files. Common problems: upload a core file from unix to windows using ftp in ascii mode.The file is going to be larger on Windows than Unix.ftp doesn't know if this is a text file with real line-ends, it takes every ascii CR and transmits two ascii characters CR/LF.The core file, tar file, library ... will be corrupted when transferred to Oracle. download a shell script to Windows, and transfer it to Unix using ftpIf the file is edited on Windows, the unix script line-end chars will be doubled.Unix doesn't know how to handle that, and will likely tell you the script is not executable.Why?  The first line of a shell script ( called "sh-bang" ), identifies the command interpreter the unix shell should use for this script.   Common examples:#/bin/sh#/bin/ksh#/bin/bash#/bin/perl#/bin/sh^M    # will not be understood.#/bin/env ksh # special syntax.  Find ksh and run it dos2unix is a common utility found on most unix platforms, that repairs the issue of Windows LineEnd characters in unix script files.   I've written my own flavor of this utility for use in Tech Support and build environments, that is a bit easier to use, and has some nice side-effects. accepts a list of files:   dos2unix *.sh repairs the file in-place.  Doesn't generate a new file you have to name retains the same timestamp;  it is the encoding that changed, not the file content. Here are the versions of dos2unix for each of the environments we work in.They are compressed with gzip, to avoid the ftp ascii transfer trap,and because I am quite limited in the number of files I can upload to this blog. AIX Linux Solaris sparc  Windows 

  Read the article

• Best language on Linux to replace manual tasks that use SSH/Telnet? [on hold]

  - by Calab

  I've been tasked to create and maintain a web browser based interface to replace several of the manual tasks that we perform now. I currently have a "shakey" but working program written in Perl (2779 lines) that uses basic Expect coding, but it has some limitations that require a great deal of coding to get around. Because of this I am going to do a complete rewrite and want to do it "right" this time. My question is this... What would be the best language to use to create a web based interface to perform SSH/Telnet tasks that we would normally do manually? Keep in mind the following requirements: Runs on a CentOS Linux system v5.10 Http will be served by Apache2 This is an INTRANET site and only accessible within our organization. User load will be light. No more that 5 users accessing it at one time. perl 5.8.8, php 5.3.3, python 2.7.2 are available... Not sure what other languages to check for, or what modules might be installed in each language. The web interface will need to provide progress indicators and text output produced by the remote connection, in real time as it is generated. If we are running our process on multiple hosts, they should be in individual threads so that they can run side by side, not sequentially. I want the ability to "trap" on specific text generated by the remote host and display an alert to the user - such as when the remote host generates an error message. I would like to avoid as much client side scripting (javascript/vbscript) as I can. Most users will be on Windows PC's using Chrome or IE as a browser. Users will be downloading the resulting output so they can process it as they see fit. I currently have no experience with "Ajax" or the like. Most of my coding experience is old 6809 assembly, Visual Basic 6, and whatever I can cut/paste from online examples in various languages (hence my "shaky" Perl program) My coding environment is Eclipse for remote code editing, but I prefer stuff like UltraEdit if I can get a decent syntax file for the language I'm using. I do have su access on the server, but I'm not the only one using this server so I can't just upgrade/install blindly as I might impact other software currently running on the machine. One reason that I'm asking here, instead of searching (which I did) is that most replies were, "use language 'xyz', but you need to use an external SSH connection" - like I'm using Expect in my Perl script. Most also did not agree on what language that 'xyz' should be. ...so, after this long posting, can someone offer some advice?

  Read the article

• [EF + Oracle] Inserting Data (Sequences) (2/2)

  - by JTorrecilla

  Prologue In the previous chapter we have see how to create DB records with EF, now we are going to Some Questions about Oracle.   ORACLE One characteristic from SQL Server that differs from Oracle is “Identity”. To all that has not worked with SQL Server, this property, that applies to Integer Columns, lets indicate that there is auto increment columns, by that way it will be filled automatically, without writing it on the insert statement. In EF with SQL Server, the properties whose match with Identity columns, will be filled after invoking SaveChanges method. In Oracle DB, there is no Identity Property, but there is something similar. Sequences Sequences are DB objects, that allow to create auto increment, but there are not related directly to a Table. The syntax is as follows: name, min value, max value and begin value. 1: CREATE SEQUENCE nombre_secuencia 2: INCREMENT BY numero_incremento 3: START WITH numero_por_el_que_empezara 4: MAXVALUE valor_maximo | NOMAXVALUE 5: MINVALUE valor_minimo | NOMINVALUE 6: CYCLE | NOCYCLE 7: ORDER | NOORDER 8:    How to get sequence value? To obtain the next val from the sequence: 1: SELECT nb_secuencia.Nextval 2: From Dual Due to there is no direct way to indicate that a column is related to a sequence, there is several ways to imitate the behavior: Use a Trigger (DB), Use Stored Procedures or Functions(…) or my particularly option. EF model, only, imports Table Objects, Stored Procedures or Functions, but not sequences. By that, I decide to create my own extension Method to invoke Next Val from a sequence: 1: public static class EFSequence 2: { 3: public static int GetNextValue(this ObjectContext contexto, string SequenceName) 4: { 5: string Connection = ConfigurationManager.ConnectionStrings["JTorrecillaEntities2"].ConnectionString; 6: Connection=Connection.Substring(Connection.IndexOf(@"connection string=")+19); 7: Connection = Connection.Remove(Connection.Length - 1, 1); 8: using (IDbConnection con = new Oracle.DataAccess.Client.OracleConnection(Connection)) 9: { 10: using (IDbCommand cmd = con.CreateCommand()) 11: { 12: con.Open(); 13: cmd.CommandText = String.Format("Select {0}.nextval from DUAL", SequenceName); 14: return Convert.ToInt32(cmd.ExecuteScalar()); 15: } 16: } 17:  18: } 19: } This Object Context’s extension method are going to invoke a query with the Sequence indicated by parameter. It takes the connection strings from the App settings, removing the meta data, that was created by VS when generated the EF model. And then, returns the next value from the Sequence. The next value of a Sequence is unique, by that, when some concurrent users are going to create records in the DB using the sequence will not get duplicates. This is my own implementation, I know that it could be several ways to do and better ways. If I find any other way, I promise to post it. To use the example is needed to add a reference to the Oracle (ODP.NET) dll.

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• Why C++ people loves multithreading when it comes to performances?

  - by user1849534

  I have a question, it's about why programmers seems to love concurrency and multi-threaded programs in general. I'm considering 2 main approach here: an async approach basically based on signals, or just an async approach as called by many papers and languages like the new C# 5.0 for example, and a "companion thread" that maanges the policy of your pipeline a concurrent approach or multi-threading approach I will just say that I'm thinking about the hardware here and the worst case scenario, and I have tested this 2 paradigms myself, the async paradigm is a winner at the point that I don't get why people 90% of the time talk about concurrency when they wont to speed up things or make a good use of their resources. I have tested multi-threaded programs and async program on an old machine with an Intel quad-core that doesn't offer a memory controller inside the CPU, the memory is managed entirely by the motherboard, well in this case performances are horrible with a multi-threaded application, even a relatively low number of threads like 3-4-5 can be a problem, the application is unresponsive and is just slow and unpleasant. A good async approach is, on the other hand, probably not faster but it's not worst either, my application just waits for the result and doesn't hangs, it's responsive and there is a much better scaling going on. I have also discovered that a context change in the threading world it's not that cheap in real world scenario, it's infact quite expensive especially when you have more than 2 threads that need to cycle and swap among each other to be computed. On modern CPUs the situation it's not really that different, the memory controller it's integrated but my point is that an x86 CPUs is basically a serial machine and the memory controller works the same way as with the old machine with an external memory controller on the motherboard. The context switch is still a relevant cost in my application and the fact that the memory controller it's integrated or that the newer CPU have more than 2 core it's not bargain for me. For what i have experienced the concurrent approach is good in theory but not that good in practice, with the memory model imposed by the hardware, it's hard to make a good use of this paradigm, also it introduces a lot of issues ranging from the use of my data structures to the join of multiple threads. Also both paradigms do not offer any security abut when the task or the job will be done in a certain point in time, making them really similar from a functional point of view. According to the X86 memory model, why the majority of people suggest to use concurrency with C++ and not just an async aproach ? Also why not considering the worst case scenario of a computer where the context switch is probably more expensive than the computation itself ?

  Read the article

• WiFi on Ubuntu 12.04 custom: downloading unbearably slow

  - by Mark

  iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

  Read the article

• Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

  - by BubbaJ

  I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

  Read the article

• Is Ubuntu recognizing and/or using my NVIDIA graphics card?

  - by user212860

  This is my first post here, and I'm pretty new to Ubuntu/Linux. I currently have no other OS except for Ubuntu 13.10. (I used to have Win7 until i got a new terabyte hard drive). My current PC build, if any of this helps: CPU: Intel i5 quad-core Graphics: NVIDIA GeForce GTX 650 RAM: 8 GB HDD: 1 TB SATA 3 Motherboard: MSi Z77 A-G41 OS Ubuntu 13.10 So I recently installed Ubuntu 13.10 and put Steam on it, and I'm seeing that my games run a lot slower than they did when I had Win7. I figured it was a graphics problem, so I checked System Settings Details Overview. It says in "Graphics" that I have "Gallium 0.4 on NVE7" (don't really know what that is). Does this mean that Ubuntu is not using my graphics card? In System Settings Software & Updates Additional Drivers, it clearly shows like this: NVIDIA Corporation: GK107 [GeForce GTX 650] -This device is using an alternative driver (And then it shows a list of drivers that I can switch back and forth to) So this is a bit confusing. In Software and Updates, it clearly shows that I have my NVIDIA card installed, and that I have a driver selected for it. But in System Settings, it shows I have some Gallium 0.4 thing. I had done a bit of research, and ended up typing command: "lspci|grep VGA" in the Terminal. It showed this in response: VGA compatible controller: NVIDIA Corporation GK107 [GeForce GTX 650] (rev a1) The Terminal seems to recognize my graphics card. What it looks like to me, is that I don't have the proper driver, and I might be using my CPU's integrated graphics. When I switch around which driver I am using in that list, it still does not see my card in System Settings. Some of the drivers in the list give me some sort of OpenGL error when I try to run a game. It might just be that my games are running slow because the game developers have not optimized it for Ubuntu that well. However, that still doesn't take away from the fact that System Settings is not showing my NVIDIA card. TL;DR Version: How do I know if my video card is being recognized/used? If my video card is not being used, what is the best way fix that? Please make your answers easy to understand. I do not mind wordy responses, as long as I can follow what you're saying. Any help would be greatly appreciated! Thanks, Jabber5

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Protobuf design patterns

  - by Monster Truck

  I am evaluating Google Protocol Buffers for a Java based service (but am expecting language agnostic patterns). I have two questions: The first is a broad general question: What patterns are we seeing people use? Said patterns being related to class organization (e.g., messages per .proto file, packaging, and distribution) and message definition (e.g., repeated fields vs. repeated encapsulated fields*) etc. There is very little information of this sort on the Google Protobuf Help pages and public blogs while there is a ton of information for established protocols such as XML. I also have specific questions over the following two different patterns: Represent messages in .proto files, package them as a separate jar, and ship it to target consumers of the service --which is basically the default approach I guess. Do the same but also include hand crafted wrappers (not sub-classes!) around each message that implement a contract supporting at least these two methods (T is the wrapper class, V is the message class (using generics but simplified syntax for brevity): public V toProtobufMessage() { V.Builder builder = V.newBuilder(); for (Item item : getItemList()) { builder.addItem(item); } return builder.setAmountPayable(getAmountPayable()). setShippingAddress(getShippingAddress()). build(); } public static T fromProtobufMessage(V message_) { return new T(message_.getShippingAddress(), message_.getItemList(), message_.getAmountPayable()); } One advantage I see with (2) is that I can hide away the complexities introduced by V.newBuilder().addField().build() and add some meaningful methods such as isOpenForTrade() or isAddressInFreeDeliveryZone() etc. in my wrappers. The second advantage I see with (2) is that my clients deal with immutable objects (something I can enforce in the wrapper class). One disadvantage I see with (2) is that I duplicate code and have to sync up my wrapper classes with .proto files. Does anyone have better techniques or further critiques on any of the two approaches? *By encapsulating a repeated field I mean messages such as this one: message ItemList { repeated item = 1; } message CustomerInvoice { required ShippingAddress address = 1; required ItemList = 2; required double amountPayable = 3; } instead of messages such as this one: message CustomerInvoice { required ShippingAddress address = 1; repeated Item item = 2; required double amountPayable = 3; } I like the latter but am happy to hear arguments against it.

  Read the article

• Can't install Git

  - by davemc

  Im following the tutorial below to install git. https://help.github.com/articles/set-up-git However when I get to the end where I need to install the helper into the same directory where Git itself is installed i get the following error: Davids-iMac:~ davidcavanagh$ which git /usr/bin/git Davids-iMac:~ davidcavanagh$ sudo mv git-credential-osxkeychain /usr/bin mv: rename git-credential-osxkeychain to /usr/bin/git-credential-osxkeychain: No such file or directory Davids-iMac:~ davidcavanagh$ Edit: I am now getting the following error when I install git and then run git -version Davids-iMac:~ davidcavanagh$ git -version /usr/bin/git: line 1: syntax error near unexpected token `newline' /usr/bin/git: line 1: `<?xml version="1.0" encoding="UTF-8"?>' I was following this tutorial guide:https://help.github.com/articles/set-up-git I have also tried using home-brew as well and I get the following error when I do this: Davids-iMac:~ davidcavanagh$ ruby -e "$(curl -fsSkL raw.github.com/mxcl/homebrew/go)" ==> This script will install: /usr/local/bin/brew /usr/local/Library/... /usr/local/share/man/man1/brew.1 Press ENTER to continue or any other key to abort ==> Downloading and Installing Homebrew... Failed during: git init -q Can anyone help? Thanks

  Read the article

• Why is firefox 4 not HW accelerated?

  - by acidzombie24

  At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >