Search Results

Search found 11482 results on 460 pages for 'portable device'.

Page 324/460 | < Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >

• How to set up VLAN network

  - by Paddington

  I'm changing my network from having every device on flat network to using VLans. My problem is that we already have a lot of devices on this network(192.168.20.0/24). From theory, I read that each Vlan has to be a different subnet and then I need to configure virtual interfaces on my Cisco router to cater for inter vlan routing. 1) How can I segment this network with minimum down time on the devices already on the network? 2) Can I just create Vlans and leave all these Vlans in the same layer 3 network so that they can go out of the network (I am not too concerned about inter-Vlan routing) or I have to create subnets which means reconfiguring the existing devices (something I do not want).

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• Overheating on Ubuntu 12.04

  - by mati

  I have a Dell Inspiron Q17R with two graphic cards and I noticed that it is overheating. I installed Bumblebee, Jupiter and Flashblock, and I followed this guide as well, but it still got up to 74C. Is there anything more I can do? It still doesn't really seem to be working well and the fan keeps spinning really fast. After performing the following test: sensors in the terminal, this is what I got: Adapter: Virtual device temp1: +75.0°C (crit = +100.0°C) temp2: +75.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +68.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +65.0°C (high = +86.0°C, crit = +100.0°C) it doesn't look good.

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• How can I have a Windows 7 VMware guest without mouse support?

  - by Matthew Read

  Despite having vmmouse.present = "FALSE" mouse.vusb.absDisabled = "TRUE" pref.motionUngrab = "FALSE" in my .vmx file and a customized VMware Tools installation on the guest that does not include the mouse driver, I somehow have fully integrated mouse support for my Windows 7 VM. I can smoothly mouse from the host into the guest without needing to click or Ctrl+G in and Ctrl+Alt out. I don't want this because of the issues it causes with games. How can I get the VM to have no special mouse support while still having VMware Tools installed for its other functions (network, graphics, etc.)? The mouse works as I want without VMware Tools but not otherwise — again, despite not installing the mouse driver and having all those settings trying to disable it. Device Manager shows that the generic Windows PS/2 mouse driver is being used and not the virtual mouse driver. Guest and host are both Windows 7 Ultimate SP1, x86 and x64 respectively. I'm using VMware Player 3.1.4 and the VMware Tools installed is the latest, 8.4.6.16648.

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• ubuntu 10.04 notebook edition running slow

  - by Nrew

  I installed ubuntu 10.04 notebook edition inside windows 7 through wubi installation. I've installed it in a Compaq Presario b1200 laptop. But the graphics is very slow. When I choose the items in the left hand pane. It takes up to 15 seconds for the screen to react. What am I supposed to do? I tried to go to the device manager and see if there is a graphic driver that isn't installed but it said that there are no proprietary drivers available. What might be the cause of this problem, how to solve this.

  Read the article

• What does *:* in netstat output stands for?

  - by chello

  While executing the command /usr/sbin/lsof -l -i -P -n under root user, I am getting this output. COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ... httpd 9164 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9164 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9164 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) httpd 9180 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9180 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9180 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) Please let me know what does *:* stands for? I am interested to know both the ipaddress and port fields. Also what does (CLOSED) mean here?

  Read the article

• Asterisk is hacking itself [duplicate]

  - by Shirker

  This question already has an answer here: How do I deal with a compromised server? 11 answers I've got some strange logs on my asterisk (and there a lot of extensions were tried): chan_sip.c: Failed to authenticate device 6006<sip:[email protected]>;tag=f106f3fe but IP XX.XX.XX.39 is its OWN IP! cat /etc/asterisk/* | grep 6006 returns nothing. asterisk -rv Asterisk 11.4.0 How its possible, that its hacks itself? And how could I trace, where it comes from?

  Read the article

• Do TCP/UDP connections add to the Windows incoming connection limit?

  - by user47899

  Hi all, I've tried to figure out what Microsoft means by "Windows sockets" and it all seems very vague. Basically we have customers that sometimes try to set up workgroups with close to 10 Windows XP computers with drive and printer shares and we're worried that some of the non-Windows Ethernet devices on the network will cause issues with the inbound connection limit outlined here where only 10 inbound connections can be active at one time. For example, there is an Ethernet Caller ID device that broadcasts UDP packets to all computers, and a kitchen display system that likewise broadcasts UDP. They may also have incoming TCP packets for our custom online ordering module. Do these TCP/UDP connections count toward the inbound connection limit? I'm aware that Windows 7 has increased the limit to 20 but we might have future customers that will push that limit. Thanks in advance

  Read the article

• Is it possible to remove buzzing from headphones which occurs only when scrolling / window redrawing?

  - by Billy ONeal

  Whenever a lot of drawing is happening on my laptop a buzzing noise is emitted by the sound hardware, which is clearly audible with headphones (similar to this question or this one). I've tried both the headphone jack on the laptop itself, and also on the dock. I've used other laptops and they all seem to have similar problems here, which leads me to believe this is more a function of relatively low quality laptop sound hardware than any fault with the headphones or this laptop in particular. I'm curious if there's some piece of hardware I might use to eliminate the buzzing. For instance, would an external USB sound device fix the problem or is it likely subject to the same kinds of issues? Would a simple filter/choke on the headphone cord itself possibly help? Or is one simply stuck with poor quality audio from laptops period?

  Read the article

• Will 5 Terabyte NAS drive be compatible with Windows XP SP3 32 bit?

  - by TrevorBoydSmith

  (NOTE: The operating system (in this case Windows XP SP3 32 bit) we are using is not a choice.) I am trying to setup a short term storage device. First, I found a large 5 Terabyte NAS drive that would IMO fulfill my storage requirements. Second, I also found that Windows XP seems to have a hard drive size limit (see 'Is there a limit to the size of a hard drive for Windows XP pre-SP1?'): XP should handle up to 2 TB per volume after the service packs are applied. You are correct. There was a 137gb limit on the orginal pre service pack windows xp. This was addressed/fixed in SP1. My question is, will my Windows XP SP3 32 bit machine see the 5 Terabyte NAS and be able to read/write properly to the NAS drive?

  Read the article

• Boot Loop contiues [closed]

  - by user1894750

  I am facing boot loop. My backend Linux works flawlessly, But the Zygote and System server does not workout. I can still use ADB and LIVE cat .. ps show that both Zygote and system_server process are there, But boot animation remains forever !! I have : 1 Wiped Data + Cache Partition 2 System Partition has been RESTORED.. There is NO PERMISSION problem... I think that there is *problem with Zygote and System_server ..* my device: Karbonn A9+ Dual Core Snap Dragon 1.2 Ghz Ram 386MB OS : ICS 4.04 Any suggestions ??

  Read the article

• Concerning persistence size in the Linux Live Creator

  - by user63085

  Message : Hello everyone! I have ,for the last several months, used the Linux Live USB Creator which it is a very useful app to make portable OS on to flash drives. I mostly use this application to test and try out new OS's as they are released, before I decide to make a hard disk installatio on to the computer. In many cases, the application developers will allow the “persistence” feature in the flash-drive-installed OS, which is just another way of saying that after multiple boot-ups and shutdowns, all the changes made to the OS will be saved in the flash-drive. But I have a question about the limit of the Persistence size in Linux Live USB Creator (currently version 2.6). I install Super OS 10 on to a partition on my external drive which has 30 GB. I wanted to reserve 10 GB for the persistence so that I can install more applications and space will not run out as I update the installed applications or when I do system updates. But why is it that only 3950 MB can be put for persistence? It would be great if, when desired, as much more persistence space could be set aside so that the space will not run out soon. Also, as I have installed the OS on a 30 GB drive, I tried to see how much space is left. But it seems only the remaining of the Persistence space is displayed when I click on the File System folder. For example, after I have just installed it now, there is 3.5 GB of free space. Where can I access the remaining 26 GB or so drive space which is in the same drive? How do I access it Sir?? It would be helpful if any one could explain and help me with this. Most importantly, it would be a big relief if the persistence can be somehow expanded by a work-around so that I can continue using my SuperOS 10.04 (now heavily customized) OS, which unfortunately has just over 576 MB of space left now, after I removed OpenOffice.org and installed the Libre Office earlier today. This is what remains from the maximum allowable 3950 MB of space for persistence at set-up. Thanks in advance!

  Read the article

• HTTP Live Streaming Broadcast

  - by user761389

  I'm designing an app for streaming video from a device (e.g. iPhone) via a server to one or more devices and have been researching Apples HTTP Live Streaming protocol. One thing that isn't clear is whether it is possible to stream live video (with audio) to the server and then have it streamed simultaneously in real time to the client devices. From reading the documentation and technical notes from Apple it seems like the index file needs to be created before the segmented video files can be served to a client. Is this right? If so maybe HTTP Live Streaming isn't suitable in this case, what other technologies or software should I consider? Thanks

  Read the article

• Setting up VMWare ESXi 5 with a single physical NIC

  - by deed02392

  I have a cheap but powerful dedicated server I am leasing with OVH, because they were recently having a promotion. I would like to try and manage all this power by playing with VMs using ESXi. However I am only provided with a single NIC. I had thought this would be easy to get around since, at home I have a single NIC which is my broadband modem, and yet a simple NAT gateway device happily provides internet access to all my devices. I am struggling to implement this on ESXi, though. Can anyone advise on how I could go about having ESXi and multiple VMs working with just one NIC? Here's my current setup: I believe all I need is to be able to configure NAT from the NIC to all the VMs etc.. How would I set up and administer this kind of infrastructure?

  Read the article

• USB webcam just works once and next time I've to reboot

  - by user30262

  I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

  Read the article

• IPP Printing from Windows 7 Ultimate

  - by Casey

  I have network IPP working on Ubuntu and Windows XP. On my Windows 7 instance, it refuses to acknowledge the remote server connection. Can anyone suggest how to configure this correctly? My install steps are: Add Printer Add a Local Printer Create a New Port and "Standard TCP/IP Port" Enter hostname http://host:631/printers/Printer_Name After that it says the printer is not detected, asks me to pick a driver, and finish up. Trying to use the device does not produce any output? If anyone has got this work, I would really appreciate a fix.

  Read the article

• How to restrict deletion of a folder on NTFS share, but still allow modify access within folder

  - by thinkdreams

  I am setting up a set of scan folders from a scanning copier device, and would like to know the best way to protect the folders (for each department) from moving or deletion, but yet still allow access for the users to modify (i.e. create/add/delete) the scanned files within the folder. Structure is: Share Name Departmental Folder User files The writing of the files initially is taken care of by a service account which has full control. We'd just like to ensure the users cannot accidentally delete the folder (which has already happened) containing all the files, etc. This is for a Windows 2003 server, NTFS permissions. Suggestions would be most appreciated.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Does Google Tv (NSZ-GS7) work with HTPC?

  - by Mark Trinh

  I was wondering if my Google Tv will seamlessly work with my HTPC. I'm running Windows Media Center using a InfiniTv quad tuner with a cable card. I'm able to connect my GTV with my HTPC and be able to see the GTV interface overlaid on top of media center. Unfortunately, I'm not really able to use the Tv/Movies App to look at live shows and change the channel. I have the Video device setup as Media Center PC, but then the Live Tv App doesn't work. If I change to my tv service provider (Verizon FIOS), the Live Tv App works, but then it won't be able to change the channel.

  Read the article

• D-link Local wireless

  - by Filippo

  I created a wireless network inside a D-Link DIR-301 connected to a Mac, What I want is that every device to connect to this network if the browser automatically opens instead of the default homepage, it redirects to my website already set in the localhost of the machine which also has the router attached. I'd also like to see that instead of the IP to connect to the site, there will be a "fake" link. What do you advise me? how can I proceed? I state that I am a bit novice in this field, being more a web programmer.

  Read the article

• How to setup IP alias on bridged interface in Ubuntu

  - by Anonymouslemming

  How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

  Read the article

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

< Previous Page | 320 321 322 323 324 325 326 327 328 329 330 331  | Next Page >