Search Results

Search found 10536 results on 422 pages for 'cpu usage'.

Page 325/422 | < Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >

• Poor Write Performance in VM inside Proxmox PVE 2.0

  - by sorsenne

  I am running a PVE 2.0 on a decent Hardware (2 SATA HDDs as RAID1, 12GB RAM, i7 CPU) but the I/O Performance is very poor inside the VM (Ubuntu 11.10 Server). The very same VM was copied to another Server running simply Ubuntu Server with KVM and had better I/O Perf. this is how the HDD is shown in the Guest: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata1.00: ATA-8: ST3000DM001-9YN166, CC49, max UDMA/133 ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC49 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA I tested with DD: $ dd bs=1M count=128 if=/dev/zero of=test conv=fdatasync 128+0 records in 128+0 records out 134217728 bytes (134 MB) copied, 19.2222 s, 7.0 MB/s on the Host, this same Test will result with 156 MB/s in average. PS: I am using VirtIO and see no error in dmesg.

  Read the article

• Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

  - by Bo102010

  (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

  Read the article

• How to deduplicate 40TB of data?

  - by Michael Stauffer

  I've inherited a research cluster with ~40TB of data across three filesystems. The data stretches back almost 15 years, and there are most likely a good amount of duplicates as researchers copy each others data for different reasons and then just hang on to the copies. I know about de-duping tools like fdupes and rmlint. I'm trying to find one that will work on such a large dataset. I don't care if it takes weeks (or maybe even months) to crawl all the data - I'll probably throttle it anyway to go easy on the filesystems. But I need to find a tool that's either somehow super efficient with RAM, or can store all the intermediary data it needs in files rather than RAM. I'm assuming that my RAM (64GB) will be exhausted if I crawl through all this data as one set. I'm experimenting with fdupes now on a 900GB tree. It's 25% of the way through and RAM usage has been slowly creeping up the whole time, now it's at 700MB. Or, is there a way to direct a process to use disk-mapped RAM so there's much more available and it doesn't use system RAM? I'm running CentOS 6.

  Read the article

• New XPC: No video, no ethernet link, but drive spins

  - by Mike Pennington

  I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

  Read the article

• VMware Workstation reboot 32-bit host when starting 64-bit guest

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

  Read the article

• Strange ASP.NET Queue Performance Counters Behavior?

  - by LemurTech

  We have an ASP.NET 2.0 site running in classic mode. I am seeing very strange behavior in the performance counter values. Perhaps these are bugs (I've been all over Google trying to verify this, without much luck), or perhaps it is just my inexperience with monitoring these things. This PerfMon graph (http://imgur.com/Jv5io5J) represents a load test where I add up to 350 virtual users to the site, at a rate of about 1/sec, performing relatively simple page browsing. At the end of the test, I gradually taper off the number of users. This is a 4 CPU server. Machine.config settings for are at the defaults. The solid blue line is ASP.NET Apps v2.x\Requests Executing for the application in question. The profile makes perfect sense, with a quick ramp-up to 32 executing requests (minWorkerThreads x 4CPUs), followed by a slower ramp-up to 48 ((maxWorkerThreads - minWorkerThreads) x 4CPUs). The solid yellow line is ASP.NET v2.x\Requests Queued. Again, this makes sense: after the initial 32 request threads are activated, the queue begins to build as new thread initialization can't keep pace with incoming requests. But as executing requests reaches its highest possible value of 48, the counter for ASP.NET Apps v2.x\Requests Queued (green solid line) suddenly springs to life and maintains step with the yellow counter. As far as I can tell, and with no other apps running on the server, these two counters should have had the same values from the start. One other odd thing: The counter for ASP.NET v2.x\Request Wait Time (dotted yellow line) also does not spring to life until executing requests reaches 48. Shouldn't I be seeing values here from the moment ASP.NET v2.x\Requests Queued begins to build? And likewise, why would ASP.NET Apps v2.x\Request Execution Time (dotted blue) increase significantly only after that peak of 48 is reached? Shouldn't it ramp-up gradually along with queued requests?

  Read the article

• How to solve SocketException: Permission denied: connect

  - by luxinxian

  I recently encountered a problem that is giving me a headache and I need help ... The System consists of two subsystems, called A and B, each running on a standalone Tomcat instance and currently running on the same machine. A invokes B's service via Spring httpInvoker (i.e. over HTTP). B system also invokes the other system's services via HTTP. Symptoms: the system starts to run and appears to work normally for around 10-15 days; the system will run for a period of time after an exception: org.springframework.remoting.RemoteAccessException: Could not access HTTP invoker remote service at [http://xxx.xxx.xxx.xxx/remoting/call]; The nested exception is java. net.SocketException: **Permission denied: connect** when the exception occurs, the system continues. This happens always, not only occasionally. (It looks like some resources are exhausted, but CPU rate < 5%, memory < 15%, network < 5%). when the system call between A and B fails, the B system call over HTTP to an external service also failed, with the same exception. Restarting both Tomcat services makes the whole system work properly. So repeatedly following steps 1 - 5, I have not found the root reason. Environment: windows 2008 R2 tomcat7.0.42 x86_64 oralce-jdk-1.7.0_40 Any ideas?

  Read the article

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Tuning Windows 7 for use in a VM

  - by intuited

  I'm running Windows 7 in a VirtualBox Virtual Machine, and would like to make it run in a more streamlined fashion. I'll be using the install primarily for testing web apps, and have no need for it to run quickly. I would like it to run with minimal memory requirements, and with minimal changes to its virtual hard drive's contents. Changes to the hard drive contents, for example the paging file, result in larger snapshot sizes. Another recent post of mine seems to be related to this issue, but does not directly address issues with Windows. One concern that I have is that Windows seems to be using 17% of its paging file even with over 900MB of memory marked "Standby" or "Free". My uneducated guess is that this is being used to store indexes or some other data that helps to speed up the system but is not really necessary. I'm also wondering if it's normal for Windows to use over 500 MB of "In Use" memory with no apps running. Will this amount decrease if I reduce the amount of "installed" memory in the VM? What steps can I take to reduce the system's memory footprint without incurring an increase in paging file usage?

  Read the article

• New Computer won't boot up

  - by Reggie

  I brought new components and put a computer together. I installed win7(32bit) and everything was working as it should. However my case came with two USB3 front ports I could not connect because of motherboard did not support USB3, so I swapped out the board for a new motherboad with USB3 connection. Now I put everything back together but it won't bootup. "Memory Ok" light stay on. Motherboad LED is on. There is power, all fans are on but I got no display. There is no activity in back of the systems, none of the peripheral connection in the back are working. I have tried the following but to no avail. Reboot multiple times Unplug power and plug the power back Reset the CMOS battery..let it stays out for 10 minutes or more. Unplug all peripheral device but no luck Reset memory..... nothing happen The only thing I did not do was remove the cpu...but I unplug everything else. Please help, thank you.

  Read the article

• Mysql can not resolve hostnames when checking privileges

  - by Fabio

  I'm going crazy to solve this. I have a mysql installation (on machine db.example.org) which doesn't resolve a given hostname. I gave privileges using hostnames i.e. GRANT USAGE ON *.* TO 'user'@'host1.example.org' IDENTIFIED BY PASSWORD 'secret' GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `my_database`.* TO 'user'@'host1.example.org' However when I try to connect using mysql -u user -p -h db.example.org I obtain ERROR 1045 (28000): Access denied for user 'user'@'192.168.11.244' (using password: YES) I already checked for correct name resolution in the dns system: $ dig -x 192.168.11.244 ;; ANSWER SECTION: 244.11.168.192.in-addr.arpa. 68900 IN PTR host1.example.org. I've also checked for skip-name-resolve option in mysql variables in fact if I can access from another machine on the same subnet using hostname privileges. The only difference is that host1.example.org and db.example.org point the same ip on the same machine i.e. both db.example.org and host1.example.org have ip 192.168.11.244. In this way all the applications using that database can use the name db.example.org and we can move the data on other hosts (if needed) just by changing the dns record, leaving the application code unchanged. What should I do to solve this or at least to understand what's happening?

  Read the article

• Ubuntu 12.04 froze during update, won't boot

  - by Cichol

  I've recently installed Ubuntu 12.04 on my laptop, and every time i tried to update it, it would freeze for a few seconds, and tell me that the updates could not be downloaded. After many, many tries I managed to get them downloaded, but then in the middle of installing them, it froze. Completely. No mouse movement, no blinking lights, no nothing. After a few hours of letting it sit there, I finally hit the power button to do a hard reset, and now when I select Ubuntu on the boot screen (Dual-boot with Windows 7), I get a blank purple screen, and then nothing. Another freeze. I've tried getting into the console, but no command I input has any visible effect. I have a ton of music stored on the partition it's in, so I'd really rather not have to reinstall. My specs, to the best of my knowledge: Clevo Corp model B7130 (Sager custom) CPU: Intel Core i5 @ 2.53gHz (4 CPUs) Graphics Card: Nvidia GeForce 425m 4096 MB RAM Drivers: Whatever comes with the download of 12.04. As a side-note, I installed Ubuntu via the Windows Installer program (wubi). Does that make a difference?

  Read the article

• Amazon EC2 instance was not available for few minutes (amazon showed that everything ok)

  - by Salvador Dali

  Few minutes ago my amazon Ec2 instance was unavailable for a few minutes. During this time neither I was able to connect to web-site with http, nor I was able to ssh to it. Also I was not able to connect to my amazon management console for some time (less than amount of unavailability of my instance). When I was able to connect to management console, it was showing me that everything is running smoothly (but I still was not able to connect to instance in any way for a minute or two). During this time I have checked their status page just to see that there is no issues (my instance is in Ireland and there is nothing wrong there today). After that I was able to log in. I checked my logins with last to see that no one except me was logging in. I also looked in apache logs and there was no errors or warnings during this time. Right now when I see my amazon monitor, I see a small spike in CPU in last 15 minutes (but this is from 10% to like 20%) I have no idea what can it be (I have never experienced anything like this before) and therefore I have no idea how scared should I be or what else should I look for. Can anyone give me a hint what my actions should be in such situation?

  Read the article

• Diagnosing linux issues with ipod syncing in Ubuntu

  - by alexpotato

  Issue: I am currently using Ubuntu 9.10 with a 5th generation Ipod 60 GB Black video classic. In general, it seems that Ubuntu can always detect the usb hd and displays it on my desktop. However, some applications seem to detect the ipod (e.g. Rythymbox and gtkpod do but Banshee does not) and some don't. I narrowed down the banshee issue to a bug that requires Nautilus to be restarted (although it would be nice to not have to do this). Also, Whenever I sync between these applications, it appears that everything is working fine during the sync but when I disconnect the ipod and browse, all of the songs seem to be there but the playlists are not. If I reconnect the ipod, in banshee specifically it sees the space usage as "other". What I am looking for is some way to at least understand what is and is not working OR directions to some where that can help me learn what's going on. I have already tried: -IRC. Either the channel is too general (e.g. #ubuntu) or no one is ever one (e.g. #banshee) -The web. Most of what I've found is too specific to one particular bug or too general. Any thoughts?

  Read the article

• How to start a s3ql script automatically on boot?

  - by ks78

  I've been experimenting with s3ql on Ubuntu 10.04, using it to mount Amazon S3 buckets. However, I'd really like it to mount them automatically. Does anyone know how to do that? I've been working on a script, which works when its run from from the commandline, but for some reason I can't get it to run automatically on boot. Does anyone have any ideas? Here's my script: #! /bin/sh # /etc/init.d/s3ql # ### BEGIN INIT INFO # Provides: s3ql # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO case "$1" in start) # Redirect stdout and stderr into the system log DIR=$(mktemp -d) mkfifo "$DIR/LOG_FIFO" logger -t s3ql -p local0.info < "$DIR/LOG_FIFO" & exec > "$DIR/LOG_FIFO" exec 2>&1 rm -rf "$DIR" modprobe fuse fsck.s3ql --batch s3://mybucket exec mount.s3ql --allow-other s3://mybucket /mnt/s3fs ;; stop) umount.s3ql /mnt/s3fs ;; *) echo "Usage: /etc/init.d/s3ql{start|stop}" exit 1 ;; esac exit 0

  Read the article

• Unix VPS server going down at almost the same time every day

  - by ronnz

  My server load seems to be really spiking and many times the server goes down at the same time each night (Around midnight). I have about 20 cPanel accounts hosted on it and have tried everything I know to try to find what is causing the issue. Some of the things I have tried: Combined all site access logs found in /etc/httpd/domlogs and cannot see anything unusual at the time of server going down. Checked most other logs in the var/log directory and found nothing indicating the issue at the time the server is going down. Checked cron logs and cannot see anything unusual.. See below. Last night CPU spiked to 7.5 at 00:14. What else can I be checking? How can I really monitor to find out the root cause? Dec 8 00:05:01 v1 crond[6082]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:05:01 v1 crond[6084]: (root) CMD (/usr/local/cpanel/whostmgr/bin/dnsqueue /dev/null 2&1) Dec 8 00:10:01 v1 crond[6435]: (root) CMD (/usr/lib64/sa/sa1 1 1) Dec 8 00:10:01 v1 crond[6436]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:15:12 v1 crond[6775]: (root) CMD (/usr/local/cpanel/scripts/autorepair recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6776]: (root) CMD (/usr/local/cpanel/scripts/recoverymgmt /dev/null 2&1) Dec 8 00:15:12 v1 crond[6777]: (root) CMD (/usr/local/cpanel/bin/dbindex /dev/null 2&1) Dec 8 00:15:12 v1 crond[6781]: (root) CMD (/usr/local/cpanel/bin/dcpumon /dev/null 2&1) Dec 8 00:20:33 v1 crond[7047]: (root) CMD (/usr/lib64/sa/sa1 1 1)

  Read the article

• Temporary boot problem after thunder storm - likely causes?

  - by alastairs

  The village where I live was sat under a thunder cloud for most of Friday, and we suffered a few power fluctuations (specifically, what seemed to be split-second outages). When I got back home from work, I found that my PCs had shut down during one of these outages. When I went to boot one of them back up, I couldn't get anything to display on screen, nor did the boot seem to complete correctly. I tried a number of things - unplugging different bits of hardware, swapping graphics adaptors, etc. - to no avail. I thought I was looking at a fried motherboard or CPU. Power seemed to be distributed correctly to the peripherals (the drives all appeared to be working) so I figured it couldn't be the PSU. Eventually I unplugged it from the mains and left it overnight (approx 12hrs unplugged). I tried it again this morning, and it booted up correctly. Woo-hoo! I have all my equipment protected by surge-protected power strips, so I don't think a spike caused these problems. Obviously it has something to do with the power fluctuations, and maybe the PSU in the problem machine got itself confused somehow. The questions are, for future reference and to help people with similar problems: What are the likely causes of the boot failure I experienced? Is a UPS a simple and cost-effective solution, or might other things help prevent this happening in future? What UPS can you recommend (my budget is limited)?

  Read the article

• Updated XAMPP with MySQL, all my tables are missing

  - by user371699

  I just updated XAMPP to a newer version, which included updating MySQL from 5.5 to 5.6. Using phpMyAdmin, however, all of my tables within my databases still appear on the left navigation panel, but the main window shows that all my databases are empty (except for information_schema, and a couple other default tables.) Clicking on a table in the navigation panel gives me a "table doesn't exist" message. It does looks like information_schema.tables doesn't have my tables, either. Can anyone assist me with this? I did make a complete backup of all my databases before the upgrade, but I first want to see if I can fix this the "normal" way. Furthermore, I'm not sure if the MySQL upgrade involved making changes to the information/performance databases, so I don't know if I can restore the old ones. Thank you. EDIT: Continuing my searching, I realized that only the INNODB databases are missing. I've tried running the following with no avail: /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp and /opt/lampp/bin $ sudo ./mysql_install_db --basedir=/opt/lampp --datadir=/opt/lampp/var/mysql The my.cnf file in /opt/lampp/etc contains the following InnoDB settings: innodb_data_home_dir = /opt/lampp/var/mysql/ innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /opt/lampp/var/mysql/ # You can set .._buffer_pool_size up to 50 - 80 % # of RAM but beware of setting memory usage too high innodb_buffer_pool_size = 16M # Deprecated in 5.6 #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 1 innodb_lock_wait_timeout = 50 What could possibly be wrong? Why is the information_schema not updating correctly? It looks like /opt/lampp/var/mysql has all my tables in it within the database directories, but they're still not showing up in information_schema.

  Read the article

• Chipset fan on the frtiz - compressed air hasn't fixed anything - is there anything I can do?

  - by Anthony

  Yesterday, my computer started to make an annoying whining noise. Knowing that this is likely a fan issue, I opened the case and proceeded to determine which fan was causing the issue. I got some compressed air and tried cleaning out the dust around it (and the rest of the computer while I was at it). This hasn't seemed to fix the issue. Now, if it were just any fan, I would probably just replace the fan - they're relatively cheap after all. However, this is a special fan. Aside: For what its worth, I feel bad that the graphics card blocks part of the fan, but it is the only slot the graphics card fits, so I had no choice. After pulling out my motherboard user guide, it looks like this is a fan placed directly on top of the chipset. To be perfectly honest, I have no clue what the purpose of the chipset is - but it sounds important. After some quick research, I see that it is responsible for providing the bridge between my CPU, RAM and graphics, among other things. Just a quick search at Newegg tells me that chipset fans can be purchased at pretty reasonable prices (< 20 dollars). Is it practical to replace this fan? It is an old computer as computers go and I wouldn't be terribly upset to upgrade the motherboard and processor, so perhaps this is a sign. Hardware Specs: Motherboard: Asus A8N-E Chipset: NVIDIA nForce4 Ultra

  Read the article

• Stop Picasa (Mac) from scanning my harddrive

  - by Bodyscanner

  I want to use Picasa desktop app instead of the tedious & clunky web interface to share a couple of photos. Every time I launch Picasa it proceeds to open an annoying pop-up/tool-tip which flicks through every file on my HD using <=95% of CPU. I don't want this so I click the X. It appears again. I try to drag it somewhere less annoying onscreen but it pings back. I look in prefs for an option to turn it off. I give up and quit app until a new build comes out, which I download and repeat the above. WTF?! I understand Google can't be as cool as Apple - iPhoto isn't perfect by any means but at least it looks nice and 'just works'. I want to launch Picasa, not have it go through everything, not have 1000's of random pics and HD cruft on display in the list, and then perhaps drag in a few photos and upload them. Any idea of if that is possible? </rant>

  Read the article

• Nginx proxy with Redmine SVN authentication.

  - by Omegaice

  I am attempting to setup a system where I have an nginx server running as a reverse proxy for multiple websites that I want to run. To separate the websites I have created a Linux container which contains each site to allow me to reduce conflicts in database usage etc. I am currently trying to get my main site working and have nginx with passenger setup and connecting to redmine and I have an Apache install specifically setup for serving the SVN over HTTP and am attempting to use the redmine authentication with that. I have set everything up as described in the redmine howtos, but when I check a project out from the SVN it always works even if the project is private and whenever I try and commit to the repositories it fails saying "Could not open the requested SVN filesystem", the Apache error log related to that event is "(20014)Internal error: Can't open file '/srv/rcs/svn/error/format': No such file or directory". If I take out the redmine authentication I can checkout and check-in repositories fine but there is no authentication. Does anyone have any ideas? Edit I tried to solve this problem another way by attempting to have the authentication work by LDAP, I managed to get it so that my user could log into the redmine website but as soon as I tried to check anything out it said that access was forbidden to the repository.

  Read the article

• 32 core (each physical core) 2.2 GhZ or 12 core (6 physical cores) 3.0GHZ?

  - by Tejaswi Rana

  I am working on a multithreaded application (Forex trading app built on C#) and had the client upgrade from the 12 core 3.0GHZ machine (Intel) to a 32 core 2.2 Ghz machine (AMD). The PassMark benchmark results were significantly higher when using multicores doing Integer, Floating and other calculations while for a single core calculation it was a bit slower than the pack (others that were being compared to with similar config as the 12 core one). Oh it also comes with 64 GB RAM (4 times as the other one) and a much faster SSD. So after configuring and running the application on that machine, not only did it not perform as well, it was significantly slower. We're talking about 30seconds - 1 minute slower on an app that usually completes processing within 5-20 secs. The application uses MAX DEGREE of PARALLELISM (TPL) which I've tried setting to number of cores and also half of that. I've also tried running single threaded and without setting any limits in parallel threading. While it may be the hardware has some issues, I am wondering if the CPU processing speed is the issue. I can overclock to 3.0 GHZ. But is that even a good idea? Server Info - AMD http://www.passmark.com/forum/showthread.php?4013-AMD-Dual-6272-performance-is-60-lower-than-benchmarks Seems that benchmark was wrong to start with - officially. Intel i7 3930k OS (same in both) Windows 7 Professional 64-bit

  Read the article

• Redundant OpenVPN connections with advanced Linux routing over an unreliable network

  - by konrad

  I am currently living in a country that blocks many websites and has unreliable network connections to the outside world. I have two OpenVPN endpoints (say: vpn1 and vpn2) on Linux servers that I use to circumvent the firewall. I have full access to these servers. This works quite well, except for the high package loss on my VPN connections. This packet loss varies between 1% and 30% depending on time and seems to have a low correlation, most of the time it seems random. I am thinking about setting up a home router (also on Linux) that maintains OpenVPN connections to both endpoints and sends all packets twice, to both endpoints. vpn2 would send all packets from home to vpn1. Return trafic would be send both directly from vpn1 to home, and also through vpn2. +------------+ | home | +------------+ | | | OpenVPN | | links | | | ~~~~~~~~~~~~~~~~~~ unreliable connection | | +----------+ +----------+ | vpn1 |---| vpn2 | +----------+ +----------+ | +------------+ | HTTP proxy | +------------+ | (internet) For clarity: all packets between home and the HTTP proxy will be duplicated and sent over different paths, to increase the chances one of them will arrive. If both arrive, the first second one can be silently discarded. Bandwidth usage is not an issue, both on the home side and endpoint side. vpn1 and vpn2 are close to each other (3ms ping) and have a reliable connection. Any pointers on how this could be achieved using the advanced routing policies available in Linux?

  Read the article

• How can I regain control over a "stuck" scroll bar?

  - by jonsca

  I normally have a lot of tabs open in the browser at one time, which normally doesn't cause any problems. Occasionally, though, the page will have fully rendered, the scroll bar is at the top of its track on the right, but placing the the mouse pointer on the scroll bar does not allow me to get control of it (and using the arrow at the bottom of the scroll bar doesn't work either). This seems to happen to me in both Firefox and Chrome, both latest versions. There is normally no load on the CPU, and while my memory usage can be high (especially with Chrome), I still usually have 25% left. I fear that this is one of those "for your own good" features, to prevent scrolling down a page that may still have elements loading and/or a stuck script, but I'm wondering whether or not there is a setting in Firefox or Chrome (or perhaps Windows in general) that will allow the scroll bar to be "released" even though the browser may be busy? It may be "2002" of me, but I wouldn't mind being able to scroll along gradually, even if the page hasn't had time to fully render all of the images, etc., yet. Does such an advanced setting exist "under the hood"?

  Read the article

• On Windows and Windows 7's Task Manager, why Memory is 1118MB Available but only 62MB Free? [closed]

  - by Jian Lin

  Possible Duplicate: Windows 7 memory usage What are the "Cached", "Available", and "Free" memory in the following picture (From Windows 7's Task Manager). If it is 1118MB Available, then why isn't it Free (to use)? As I understand it, if a bowl of noodle is available, that doesn't mean it is free... it may still cost $7. But what about in the Task Manager, when it is Available, it is also not Free? Does it cost $2 per MB? What about the "Cached"... What exactly is the Cached Memory? We may put some hard disk data in RAM and so we cache the data in RAM, for faster access (that's the operating system's job). So the Total Physical RAM is 6GB, what is the 1106 Cached? Cached in where? Caching physical RAM in ... some where? It is also strange that the Cached value is sometimes higher and sometimes lower than the Available value. Can somebody who is knowledgeable about this shred some light on these meanings?

  Read the article

< Previous Page | 321 322 323 324 325 326 327 328 329 330 331 332  | Next Page >