Search Results

Search found 47491 results on 1900 pages for 'super x man'.

Page 326/1900 | < Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >

• Disaster After Removing Two HDD From LaCie RAID 0 Case

  - by John

  This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

  Read the article

• No space left on device with encrypted disk that takes all space

  - by Yosef

  I use Ubuntu 11.04. There's no space left on device. I have encrypted the disk that takes up space (maybe it's good to disable it, but I don't know how). In shell, I get this message: No space left on device I run df -I: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda1 3055616 602499 2453117 20% / none 210161 890 209271 1% /dev none 214789 8 214781 1% /dev/shm none 214789 53 214736 1% /var/run none 214789 3 214786 1% /var/lock /home/myuser/.Private 3055616 602499 2453117 20% /home/myuser df -I Edit: When I run only df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 48060296 45618928 0 100% / none 1538340 684 1537656 1% /dev none 1547596 808 1546788 1% /dev/shm none 1547596 104 1547492 1% /var/run none 1547596 0 1547596 0% /var/lock /home/myuser/.Private 48060296 45618928 0 100% /home/myuser Edit: I thinking about few solution but I don't know which better and how exactly to do them: to enlarge partition size (I cant install gparted - no more disk space) remove encryption of partition - I really not need that

  Read the article

• I can't connect new Windows 7 PC to Mac iBook with OS 10.3.9

  - by Jeff Humm

  Help ! I have an old iBook wired to a router and a new PC linking wirelessly to same router. On the Mac I have 'seen' the PC but not been able to connect to it. On the PC, the Network and Sharing Centre lists 'IBOOK'. When I click on this, 'Windows Security' asks me to 'Enter Network Password', asking for User name and password. I have tried: 1) The user name and password of my admin account on the iBook. This returns a 'logon failure' message but lists the user name as [NAME_OF_PC\User Name], suggesting it was looking for the user name of the PC, not the Mac. 2) The user name and password of my account on the PC. This also returns a 'logon failure' message. 3) The user name of my account on the PC and the 'homegroup password' given to me by Windows when setting up the PC. This also returns a 'logon failure' message. Today I've tried connecting the two machines via a patch cable - still no joy. Can anyone help? It is 20 years since I wrestled with any OS other than Mac, and 10 years since I've done mich wrangling with the Macs, so please assume no knowledge! Thanks in advance,

  Read the article

• Can't get iPhone to Sync with MacBook running OS X.

  - by Nicolas

  I can't get the iPhone to sync with my MacBook running OS X, I've re-installed OS X and iTunes and then it worked, however once the MacBook had been switched off and on again the iPhone wouldn't sync. I then deleted AppleMobileDevice.kext, DeviceLink.Framework, MobileDevice.Framework and AppleMobileDeviceSupport.pky and re-installed iTunes, this then solved the problem until the MacBook was turned off and then on again. I've run out of ideas. Many thanks Nicolas

  Read the article

• Apple Magic Mouse on Windows XP SP3

  - by index

  Using generic Windows bluetooth drivers + Apple Wireless Mouse drivers as Bluetooth HID service. The mouse is connected. It just does not do anything. It does not show up under mice in hardware manager, just as Bluetooth HID. Not using the Apple drivers does not work either. I'm using a logilink BT0007

  Read the article

• How to make a streaming server to stream media from computer to mobile phone in wifi?

  - by zkz

  Usually we have many HD movies in our computer, but we want to see them by our mobile phone. This requirement produces some questions: 1?the HD videos are too big to transfer to phone timely and it it hard to play on phone smoothly, so we have to transform the videos smaller and fit the screen of phone. 2?the coded format of the videos are varied, but limited types are supported by mobile phone, so we should transform the coded format to those supported by mobile phone. I've leaned the streaming media fit this problem, what I want is: 1?are there any good opensource projects fit this(ffmpeg?live555? darwin?)? 2?are they quick enough to transform coded format and transfer to mobile phone to play with no delay? Thank u very much!

  Read the article

• Installing a different edition of Windows 8 on an OEM system

  - by user22105

  My PC comes with an OEM copy of Windows 8 (regular), but I only have a Windows 8 Professional DVD. Will Windows 8 automatically detect the edition associated with the product key in my BIOS and install Windows 8 (regular) instead of allowing me to enter the key for the Professional edition? (I have an Asus Q200E Win 8 Core OEM laptop. I borrowed a Windows 8 Professional DVD from my friends, so naturally, I can’t use his product key.)

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• suddenly cannot mount nfs share from Windows 7

  - by bing

  I recently reinstalled my file server (moved from fedora to Ubuntu server). Now I cannot mount my nfs share from Windows 7, mounting from Mac OSX works fine. In Windows I either keep getting "the semaphore timeout period has expired" or "an unexpected error has occured". Does Ubuntu need some special magic to allow Windows 7 to mount an nfs share? This is my exports file /home/Bing/ 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN2 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN3 192.168.1.*(rw,async,insecure,no_subtree_check)

  Read the article

• You need to format the disk in drive

  - by Sab

  I was copying some files over to my external hard disk and suddenly a message popped up saying that some file was open and it could not continue.It asks me whether I want to cancel the operation and I said cancel(The other operation was continue.) After that whenever I plug in the usb into the same computer it does not work. It keeps saying that I need to format the disk to continue. Luckily for me it opened on another computer and am backing up all my data. But now I am wondering why exactly this happened. Is it that the hard disk is weak. Also as an addon I currently use http://www.dtidata.com/windowssurfacescanner/ program to check for bad sectors. Is this the recommended way or is there some other better more reliable way to check if my hard disk is failing? Also could the above problem be because the hard disk is failing? If not why does it happen.Even if the hard disk is interrupted in the middle of a read write cycle doesnt there exist error handling code to enable gracefull recovery?

  Read the article

• On dual boot system, Is it possible to use VirtualBox to boot other installed OS?

  - by Derek Ziemba

  I currently run Windows 7 from a 256GB SSD as my Operating System. Lately, for school, I've been using openSUSE linux inside a VirtualBox PC and I'm really liking it. I'm starting to hate even working in Windows. But I can't just abandon Windows. I've been considering dual booting openSUSE and will likely purchase another SSD for openSUSE. Once I have the dual boot set-up, there is going to be times I need to do something quick in the operating system that I'm not currently in. It would be a pain to have to reboot the computer each time I need to switch the OS for a simple task, especially from Windows since it doesn't let you save it's state. From openSUSE, I want to be able to start a VirtualBox Machine using my Windows Drive. And in Windows, I want to be able to start a VirtualBox Machine of my openSUSE Drive. Would this be possible? The issue I'm worried about is drivers. For instance, the OS will be installed on native hardware and have the native hardware's drivers configured. When I try to boot the OS in a VirtualMachine, I feel like the OS is not going to know what to do, and have to reconfigure itself or just not work.

  Read the article

• Windows Vista to Windows 7 Gbit LAN slow file copy

  - by ashgromnies

  I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

  Read the article

• TextMate suddenly highlighting all text dark red...?

  - by AP257

  I'm using TextMate on Snow Leopard, don't know much about how it works. After I hit an unknown keyboard shortcut, it suddenly decided to highlight almost all text in my Python files dark red - making all my Python virtually unreadable! I must have accidentally pressed a shortcut - but I've no idea what I did or how to turn it off, and can't find any relevant help in the manual or form. Even just 'turn off all highlighting' would do. Anyone know how to turn this highlighting off? Bit desperate! UPDATE: Figured it out. There's a tiny, tiny dropdown list at the very bottom of every TextMate editing window where you can set the language, so TextMate can highlight invalid syntax - I'd accidentally clicked on it and set the language to something other than Python. Will leave the question up though in case others have the same problem.

  Read the article

• How do you remove old Windows Vista Backups?

  - by leeand00

  I've been backing up my Vista box using Complete PC backup for quite a while now, and I was just wondering how it is that you remove old backups when your backup drive is to full for another backup. I recently received the following error: The backup did not complete successfully. An error occurred. The following information might help you resolve the error: There is not enough space to save the backup files. Free up disk space or change your backup settings. (0x81000005) I don't see anything in the settings for the backup to change this. Do I have to mount the backup to delete an old backup? If so where is that file located? Update Posted my question here

  Read the article

• Can I use a package manager of one distribution on another?

  - by Yktula

  I want to use Gentoo's packages on Fedora. Is this possible?

  Read the article

• Zyxel P-320W: How to connect to my web server using public IP

  - by hvtuananh

  My company's router is Zyxel P-320W and I have a public static IP. I registered a few domains name and point to this IP address. I already setup Virtual Hosts and configured port-forwarding to my internal server and it works well. I can connect to all domains from outside The problem is I cannot connect to my domains from inside One workaround way is modify hosts file to add internal IP for those domains, but my company have many computers and I don't want to setup all PC manually

  Read the article

• Why would only the cpu fan not spin and no video displayed?

  - by Patrick

  I just built a new computer and when I first powered it on I got a continuous beeping which according to the manual means a power failure. After moving the voltage switch to the left a little I was able to get the beeping to stop. Even after the stopping though the CPU fan doesn't spin, and there is no display on the monitor. All the other fans and lights come on in the computer though, the DVD drive is working and ejects the tray, and the hard drive sounds like it spins up. Has anyone seen this before and know what is wrong or what has failed?

  Read the article

• Westell router setup page

  - by eych

  I can connect to the internet, ping 192.168.1.1 with no problem, haven't changed any firewall or Anti-virus settings, but bringing up 192.168.1.1 in the browser gives 'Problem loading page'. XP machine...was able to connect to the setup page few weeks ago. Any thoughts?

  Read the article

• How to quickly empty a very full recycle bin?

  - by Pekka

  I have deleted about half a million files from a folder, and didn't think to press Shift in order to delete them completely straight away. Now they're clogging my recycle bin, and Windows claims it will take 4 hours to empty it - it claims to do about 68 files per second. Is there some magic or an alternative method that can speed this up? Bounty - I'm starting a bounty. The files are still in my bin, as there was no pressing need to get rid of them and this way, I can try out the suggestions presented. I am, however, looking for a way that does not include hard-deleting the contents of the RECYCLER folder - I'm sure that would work, but it feels a bit unclean to me.

  Read the article

• Mecer laptop gives me a white screen when I close the screen

  - by Dane Rossenrode

  I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

  Read the article

• Wired network on computer to wifi

  - by user329592

  I just got myself a wifi capable cell phone, but I dont have a wireless internet at home. I do have a wired unlimited internet connection on my computer, and I wonder whether there is any gadget that I can plug into my computer (maybe at the usb port?) with which I can turn my computer into a wifi access point? I mean, a dongle or something which will enable me to connect my phone to my computer's internet through wi-fi? Also, I dont know anything about networking, so would it be hard for me to set up a secure wifi point? Thank you for reading this question through. Hope I can buy some sort of adapter which is comparitively cheap.

  Read the article

• Determine the time difference between two linux servers

  - by Paul

  I am troubleshooting a latency network issue on a network. It is probably a nic or cabling issue, but while I was going through the process of figuring it out, I was looking at the timings of a ping packet leaving a network card and arriving at another server. Both linux. So I have tcpdump running on both, and I issue a ping from one to the other, and back again, and looking at the timing differences might have shed light on where the latency is coming from. It is an academic exercise now, as I need to eliminate some more fundamental causes, but I was curious as to how this could be achieved. Given that ntpd is installed and running on two servers, how can I confirm the current time discrepency between the two servers, to whatever level of accuracy is possible - given that we are talking about latency on a local lan, which is ideally a millisecond or so. NTP itself is accurate to a couple of ms under good conditions, and as both servers are in the same environment, they should (presumably) achieve a similar level of accuracy, and so should have a time discrepency between them of a only few ms - but how can I check this?

  Read the article

• Exporting Environment Variables in Ubuntu Linux

  - by stanigator

  I know many people have asked about environment variables before, but I am having a hard time dealing with these paths while ensuring I don't mess around with the original settings. How would you go about executing these commands in Ubuntu in terms of environment variables? Thanks in advance! Please put /home/stanley/Downloads/ns-allinone-2.34/bin:/home/stanley/Downloads/ns-allinone-2.34/tcl8.4.18/unix:/home/stanley/Downloads/ns-allinone-2.34/tk8.4.18/unix into your PATH environment; so that you'll be able to run itm/tclsh/wish/xgraph. IMPORTANT NOTICES: (1) You MUST put /home/stanley/Downloads/ns-allinone-2.34/otcl-1.13, /home/stanley/Downloads/ns-allinone-2.34/lib, into your LD_LIBRARY_PATH environment variable. If it complains about X libraries, add path to your X libraries into LD_LIBRARY_PATH. If you are using csh, you can set it like: setenv LD_LIBRARY_PATH If you are using sh, you can set it like: export LD_LIBRARY_PATH= (2) You MUST put /home/stanley/Downloads/ns-allinone-2.34/tcl8.4.18/library into your TCL_LIBRARY environmental variable. Otherwise ns/nam will complain during startup.

  Read the article

• SQuirrelSQL redirect ouput to a file?

  - by Oscar Reyes

  Does anybody knows if SQuirrel SQL client may output the of several SQL commands to a single result window in textplain or to a file ( as SQL+ would ) So I can: select * from dual; select * from dual; And have both results in a single "ready to" Ctrl-C format?

  Read the article

• How can I run a speed test for Netflix and Hulu?

  - by Brennan Stehling

  Since the FCC rules were struck down I have noticed that Netflix and Hulu often stall on my Time Warner home connection. I've heard others are experiencing the same delays. I use Speedtest.net regularly from my computer and phone to check my connection and typically at home I get 10 to 15Mbps and occasionally higher. Currently it is around 10Mbps yet Hulu is stalling. Is there a way to specifically test my speeds for streaming Netflix and Hulu?

  Read the article

< Previous Page | 322 323 324 325 326 327 328 329 330 331 332 333  | Next Page >