Search Results

Search found 15172 results on 607 pages for 'array intersect'.

Page 327/607 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• Did I lose my RAID again?

  - by BarsMonster

  Hi! A little history: 2 years ago I was really excited to find out that mdadm is so powerful that it even can reshape arrays, so you can start with a smaller array and then grow it as you need. I've bought 3x1Tb drives and made a RAID-5. It was fine for a year. Then I bought 2x more, and tried to reshape to RAID-6 out of 5 drives, and due to some mess with superblock versions, lost all content. Had to rebuild it from scratch, but 2Tb of data were gone. Yesterday I bought 2 more drives, and this time I had everything: properly built array, UPS. I've disabled write intent map, added 2 new drives as spares and run a command to grow array to 7-disks. It started working, but speed was ridiculously slow, ~100kb/sec. After processing first 37Mb at such an amazing speed, one of old HDDs fails. I properly shutdown the PC and disconnected the failed drive. After bootup it appeared that it recreated the intent map as it was still in mdadm config, so I removed it from config and rebooted again. Now all I see is that all mdadm processes deadlock, and don't do anything. PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1937 root 20 0 12992 608 444 D 0 0.1 0:00.00 mdadm 2283 root 20 0 12992 852 704 D 0 0.1 0:00.01 mdadm 2287 root 20 0 0 0 0 D 0 0.0 0:00.01 md0_reshape 2288 root 18 -2 12992 820 676 D 0 0.1 0:00.01 mdadm And all I see in mdstat is: $ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid6 sdb1[1] sdg1[4] sdf1[7] sde1[6] sdd1[0] sdc1[5] 2929683456 blocks super 1.2 level 6, 1024k chunk, algorithm 2 [7/6] [UU_UUUU] [>....................] reshape = 0.0% (37888/976561152) finish=567604147.2min speed=0K/sec I've already tried mdadm 2.6.7, 3.1.4 and 3.2 - nothing helps. Did I lose my data again? Any suggestions on how can I make this work? OS is Ubuntu Server 10.04.2. PS. Needless to say, the data is inaccessible - I cannot mount /dev/md0 to save the most valuable data. You can see my disappointment - the very specific thing I was excited about failed twice taking 5Tb of my data with it. Update: It appears there is some nice info in kern.log: 21:38:48 ...: [ 166.522055] raid5: reshape will continue 21:38:48 ...: [ 166.522085] raid5: device sdb1 operational as raid disk 1 21:38:48 ...: [ 166.522091] raid5: device sdg1 operational as raid disk 4 21:38:48 ...: [ 166.522097] raid5: device sdf1 operational as raid disk 5 21:38:48 ...: [ 166.522102] raid5: device sde1 operational as raid disk 6 21:38:48 ...: [ 166.522107] raid5: device sdd1 operational as raid disk 0 21:38:48 ...: [ 166.522111] raid5: device sdc1 operational as raid disk 3 21:38:48 ...: [ 166.523942] raid5: allocated 7438kB for md0 21:38:48 ...: [ 166.524041] 1: w=1 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524050] 4: w=2 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524056] 5: w=3 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524062] 6: w=4 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524068] 0: w=5 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524073] 3: w=6 pa=2 pr=5 m=2 a=2 r=7 op1=0 op2=0 21:38:48 ...: [ 166.524079] raid5: raid level 6 set md0 active with 6 out of 7 devices, algorithm 2 21:38:48 ...: [ 166.524519] RAID5 conf printout: 21:38:48 ...: [ 166.524523] --- rd:7 wd:6 21:38:48 ...: [ 166.524528] disk 0, o:1, dev:sdd1 21:38:48 ...: [ 166.524532] disk 1, o:1, dev:sdb1 21:38:48 ...: [ 166.524537] disk 3, o:1, dev:sdc1 21:38:48 ...: [ 166.524541] disk 4, o:1, dev:sdg1 21:38:48 ...: [ 166.524545] disk 5, o:1, dev:sdf1 21:38:48 ...: [ 166.524550] disk 6, o:1, dev:sde1 21:38:48 ...: [ 166.524553] ...ok start reshape thread 21:38:48 ...: [ 166.524727] md0: detected capacity change from 0 to 2999995858944 21:38:48 ...: [ 166.524735] md: reshape of RAID array md0 21:38:48 ...: [ 166.524740] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. 21:38:48 ...: [ 166.524745] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for reshape. 21:38:48 ...: [ 166.524756] md: using 128k window, over a total of 976561152 blocks. 21:39:05 ...: [ 166.525013] md0: 21:42:04 ...: [ 362.520063] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520068] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520073] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:42:04 ...: [ 362.520083] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520092] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:42:04 ...: [ 362.520100] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:42:04 ...: [ 362.520107] Call Trace: 21:42:04 ...: [ 362.520133] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520148] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520159] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:42:04 ...: [ 362.520169] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:42:04 ...: [ 362.520179] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520188] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520194] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:42:04 ...: [ 362.520205] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:42:04 ...: [ 362.520214] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:42:04 ...: [ 362.520222] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:42:04 ...: [ 362.520230] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:42:04 ...: [ 362.520236] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:42:04 ...: [ 362.520244] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:42:04 ...: [ 362.520251] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:42:04 ...: [ 362.520258] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:42:04 ...: [ 362.520265] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:42:04 ...: [ 362.520272] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:42:04 ...: [ 362.520279] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:42:04 ...: [ 362.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520290] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:42:04 ...: [ 362.520297] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:42:04 ...: [ 362.520304] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:42:04 ...: [ 362.520310] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:42:04 ...: [ 362.520317] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:42:04 ...: [ 362.520324] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:42:04 ...: [ 362.520331] [<ffffffff811a7938>] check_partition+0x138/0x190 21:42:04 ...: [ 362.520338] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:42:04 ...: [ 362.520344] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:42:04 ...: [ 362.520350] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520356] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520362] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520369] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520377] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520385] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520391] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520398] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520406] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:42:04 ...: [ 362.520414] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520421] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520428] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520437] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520446] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520450] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520454] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:42:04 ...: [ 362.520462] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520470] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:42:04 ...: [ 362.520478] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:42:04 ...: [ 362.520485] Call Trace: 21:42:04 ...: [ 362.520495] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520502] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520508] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:42:04 ...: [ 362.520514] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:42:04 ...: [ 362.520520] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:42:04 ...: [ 362.520527] [<ffffffff81145375>] __fput+0xf5/0x210 21:42:04 ...: [ 362.520534] [<ffffffff811454b5>] fput+0x25/0x30 21:42:04 ...: [ 362.520540] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:42:04 ...: [ 362.520546] [<ffffffff81141697>] sys_close+0xb7/0x120 21:42:04 ...: [ 362.520553] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:42:04 ...: [ 362.520559] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520563] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520567] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:42:04 ...: [ 362.520575] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520582] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:42:04 ...: [ 362.520590] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:42:04 ...: [ 362.520597] Call Trace: 21:42:04 ...: [ 362.520608] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:42:04 ...: [ 362.520616] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:42:04 ...: [ 362.520626] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:42:04 ...: [ 362.520634] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520644] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:42:04 ...: [ 362.520651] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:42:04 ...: [ 362.520658] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:42:04 ...: [ 362.520668] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:42:04 ...: [ 362.520675] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:42:04 ...: [ 362.520681] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:42:04 ...: [ 362.520688] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:42:04 ...: [ 362.520694] [<ffffffff81084416>] kthread+0x96/0xa0 21:42:04 ...: [ 362.520701] [<ffffffff810131ea>] child_rip+0xa/0x20 21:42:04 ...: [ 362.520707] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:42:04 ...: [ 362.520713] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:42:04 ...: [ 362.520718] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:42:04 ...: [ 362.520721] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:42:04 ...: [ 362.520725] mdadm D 0000000000000000 0 2288 1 0x00000000 21:42:04 ...: [ 362.520733] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:42:04 ...: [ 362.520741] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:42:04 ...: [ 362.520748] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:42:04 ...: [ 362.520755] Call Trace: 21:42:04 ...: [ 362.520763] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:42:04 ...: [ 362.520771] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:42:04 ...: [ 362.520777] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:42:04 ...: [ 362.520783] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:42:04 ...: [ 362.520790] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:42:04 ...: [ 362.520795] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:42:04 ...: [ 362.520801] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:42:04 ...: [ 362.520808] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:42:04 ...: [ 362.520815] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:42:04 ...: [ 362.520821] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:42:04 ...: [ 362.520828] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:42:04 ...: [ 362.520834] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:42:04 ...: [ 362.520841] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:42:04 ...: [ 362.520848] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:42:04 ...: [ 362.520855] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:42:04 ...: [ 362.520862] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:42:04 ...: [ 362.520868] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:42:04 ...: [ 362.520874] [<ffffffff811418b0>] sys_open+0x20/0x30 21:42:04 ...: [ 362.520882] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520065] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520077] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:44:04 ...: [ 482.520087] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520096] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:44:04 ...: [ 482.520104] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:44:04 ...: [ 482.520112] Call Trace: 21:44:04 ...: [ 482.520139] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520154] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520165] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:44:04 ...: [ 482.520175] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:44:04 ...: [ 482.520185] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520194] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520201] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:44:04 ...: [ 482.520212] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:44:04 ...: [ 482.520221] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:44:04 ...: [ 482.520229] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:44:04 ...: [ 482.520237] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:44:04 ...: [ 482.520244] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:44:04 ...: [ 482.520252] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:44:04 ...: [ 482.520258] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:44:04 ...: [ 482.520266] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:44:04 ...: [ 482.520273] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:44:04 ...: [ 482.520280] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:44:04 ...: [ 482.520286] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:44:04 ...: [ 482.520293] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520299] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:44:04 ...: [ 482.520306] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:44:04 ...: [ 482.520313] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:44:04 ...: [ 482.520319] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:44:04 ...: [ 482.520327] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:44:04 ...: [ 482.520334] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:44:04 ...: [ 482.520341] [<ffffffff811a7938>] check_partition+0x138/0x190 21:44:04 ...: [ 482.520348] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:44:04 ...: [ 482.520355] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:44:04 ...: [ 482.520361] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520367] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520373] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520380] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520388] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520396] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520403] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520410] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520417] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:44:04 ...: [ 482.520426] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520432] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520438] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520447] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520458] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520462] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520467] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:44:04 ...: [ 482.520475] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520483] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:44:04 ...: [ 482.520490] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:44:04 ...: [ 482.520498] Call Trace: 21:44:04 ...: [ 482.520508] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520515] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520521] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:44:04 ...: [ 482.520527] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:44:04 ...: [ 482.520533] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:44:04 ...: [ 482.520541] [<ffffffff81145375>] __fput+0xf5/0x210 21:44:04 ...: [ 482.520547] [<ffffffff811454b5>] fput+0x25/0x30 21:44:04 ...: [ 482.520554] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:44:04 ...: [ 482.520560] [<ffffffff81141697>] sys_close+0xb7/0x120 21:44:04 ...: [ 482.520568] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:44:04 ...: [ 482.520574] INFO: task md0_reshape:2287 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520578] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520582] md0_reshape D ffff88003aee96f0 0 2287 2 0x00000000 21:44:04 ...: [ 482.520590] ffff88003cf05a70 0000000000000046 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520597] ffff88003aee9aa8 ffff88003cf05fd8 0000000000015bc0 ffff88003aee96f0 21:44:04 ...: [ 482.520605] 0000000000015bc0 ffff88003cf05fd8 0000000000015bc0 ffff88003aee9aa8 21:44:04 ...: [ 482.520612] Call Trace: 21:44:04 ...: [ 482.520623] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:44:04 ...: [ 482.520633] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:44:04 ...: [ 482.520643] [<ffffffffa0226f80>] reshape_request+0x4c0/0x9a0 [raid456] 21:44:04 ...: [ 482.520651] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520661] [<ffffffffa022777a>] sync_request+0x31a/0x3a0 [raid456] 21:44:04 ...: [ 482.520668] [<ffffffff81052713>] ? __wake_up+0x53/0x70 21:44:04 ...: [ 482.520675] [<ffffffff814156b1>] md_do_sync+0x621/0xbb0 21:44:04 ...: [ 482.520685] [<ffffffff810387b9>] ? default_spin_lock_flags+0x9/0x10 21:44:04 ...: [ 482.520692] [<ffffffff8141640c>] md_thread+0x5c/0x130 21:44:04 ...: [ 482.520699] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:44:04 ...: [ 482.520705] [<ffffffff814163b0>] ? md_thread+0x0/0x130 21:44:04 ...: [ 482.520711] [<ffffffff81084416>] kthread+0x96/0xa0 21:44:04 ...: [ 482.520718] [<ffffffff810131ea>] child_rip+0xa/0x20 21:44:04 ...: [ 482.520725] [<ffffffff81084380>] ? kthread+0x0/0xa0 21:44:04 ...: [ 482.520730] [<ffffffff810131e0>] ? child_rip+0x0/0x20 21:44:04 ...: [ 482.520735] INFO: task mdadm:2288 blocked for more than 120 seconds. 21:44:04 ...: [ 482.520739] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:44:04 ...: [ 482.520743] mdadm D 0000000000000000 0 2288 1 0x00000000 21:44:04 ...: [ 482.520751] ffff88002cca9c18 0000000000000086 0000000000015bc0 0000000000015bc0 21:44:04 ...: [ 482.520759] ffff88003aee83b8 ffff88002cca9fd8 0000000000015bc0 ffff88003aee8000 21:44:04 ...: [ 482.520767] 0000000000015bc0 ffff88002cca9fd8 0000000000015bc0 ffff88003aee83b8 21:44:04 ...: [ 482.520774] Call Trace: 21:44:04 ...: [ 482.520782] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:44:04 ...: [ 482.520790] [<ffffffff812a6d50>] ? exact_match+0x0/0x10 21:44:04 ...: [ 482.520797] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:44:04 ...: [ 482.520804] [<ffffffff811742c8>] __blkdev_get+0x68/0x3d0 21:44:04 ...: [ 482.520810] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:44:04 ...: [ 482.520816] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:44:04 ...: [ 482.520822] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:44:04 ...: [ 482.520829] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:44:04 ...: [ 482.520837] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:44:04 ...: [ 482.520843] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:44:04 ...: [ 482.520850] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:44:04 ...: [ 482.520857] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:44:04 ...: [ 482.520864] [<ffffffff810ff0e1>] ? lru_cache_add_lru+0x21/0x40 21:44:04 ...: [ 482.520871] [<ffffffff8111109c>] ? do_anonymous_page+0x11c/0x330 21:44:04 ...: [ 482.520878] [<ffffffff81115d5f>] ? handle_mm_fault+0x31f/0x3c0 21:44:04 ...: [ 482.520885] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:44:04 ...: [ 482.520891] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:44:04 ...: [ 482.520897] [<ffffffff811418b0>] sys_open+0x20/0x30 21:44:04 ...: [ 482.520905] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520053] INFO: task mdadm:1937 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520059] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520065] mdadm D 00000000ffffffff 0 1937 1 0x00000000 21:46:04 ...: [ 602.520075] ffff88002ef4f5d8 0000000000000082 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520084] ffff88002eb5b198 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5ade0 21:46:04 ...: [ 602.520091] 0000000000015bc0 ffff88002ef4ffd8 0000000000015bc0 ffff88002eb5b198 21:46:04 ...: [ 602.520099] Call Trace: 21:46:04 ...: [ 602.520127] [<ffffffffa0224892>] get_active_stripe+0x312/0x3f0 [raid456] 21:46:04 ...: [ 602.520142] [<ffffffff81059ae0>] ? default_wake_function+0x0/0x20 21:46:04 ...: [ 602.520153] [<ffffffffa0228413>] make_request+0x243/0x4b0 [raid456] 21:46:04 ...: [ 602.520162] [<ffffffffa0221a90>] ? release_stripe+0x50/0x70 [raid456] 21:46:04 ...: [ 602.520171] [<ffffffff81084790>] ? autoremove_wake_function+0x0/0x40 21:46:04 ...: [ 602.520180] [<ffffffff81414df0>] md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520187] [<ffffffff81414df0>] ? md_make_request+0xc0/0x130 21:46:04 ...: [ 602.520197] [<ffffffff8129f8c1>] generic_make_request+0x1b1/0x4f0 21:46:04 ...: [ 602.520206] [<ffffffff810f6515>] ? mempool_alloc_slab+0x15/0x20 21:46:04 ...: [ 602.520215] [<ffffffff8116c2ec>] ? alloc_buffer_head+0x1c/0x60 21:46:04 ...: [ 602.520222] [<ffffffff8129fc80>] submit_bio+0x80/0x110 21:46:04 ...: [ 602.520229] [<ffffffff8116c849>] submit_bh+0xf9/0x140 21:46:04 ...: [ 602.520237] [<ffffffff8116f124>] block_read_full_page+0x274/0x3b0 21:46:04 ...: [ 602.520244] [<ffffffff81172c90>] ? blkdev_get_block+0x0/0x70 21:46:04 ...: [ 602.520252] [<ffffffff8110d875>] ? __inc_zone_page_state+0x35/0x40 21:46:04 ...: [ 602.520259] [<ffffffff810f46d8>] ? add_to_page_cache_locked+0xe8/0x160 21:46:04 ...: [ 602.520266] [<ffffffff81173d78>] blkdev_readpage+0x18/0x20 21:46:04 ...: [ 602.520273] [<ffffffff810f484b>] __read_cache_page+0x7b/0xe0 21:46:04 ...: [ 602.520279] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520285] [<ffffffff81173d60>] ? blkdev_readpage+0x0/0x20 21:46:04 ...: [ 602.520292] [<ffffffff810f57dc>] do_read_cache_page+0x3c/0x120 21:46:04 ...: [ 602.520300] [<ffffffff810f5909>] read_cache_page_async+0x19/0x20 21:46:04 ...: [ 602.520306] [<ffffffff810f591e>] read_cache_page+0xe/0x20 21:46:04 ...: [ 602.520314] [<ffffffff811a6cb0>] read_dev_sector+0x30/0xa0 21:46:04 ...: [ 602.520321] [<ffffffff811a7fcd>] amiga_partition+0x6d/0x460 21:46:04 ...: [ 602.520328] [<ffffffff811a7938>] check_partition+0x138/0x190 21:46:04 ...: [ 602.520335] [<ffffffff811a7a7a>] rescan_partitions+0xea/0x2f0 21:46:04 ...: [ 602.520342] [<ffffffff811744c7>] __blkdev_get+0x267/0x3d0 21:46:04 ...: [ 602.520348] [<ffffffff81174650>] ? blkdev_open+0x0/0xc0 21:46:04 ...: [ 602.520354] [<ffffffff81174640>] blkdev_get+0x10/0x20 21:46:04 ...: [ 602.520359] [<ffffffff811746c1>] blkdev_open+0x71/0xc0 21:46:04 ...: [ 602.520367] [<ffffffff811419f3>] __dentry_open+0x113/0x370 21:46:04 ...: [ 602.520375] [<ffffffff81253f8f>] ? security_inode_permission+0x1f/0x30 21:46:04 ...: [ 602.520383] [<ffffffff8114de3f>] ? inode_permission+0xaf/0xd0 21:46:04 ...: [ 602.520390] [<ffffffff81141d67>] nameidata_to_filp+0x57/0x70 21:46:04 ...: [ 602.520397] [<ffffffff8115207a>] do_filp_open+0x2da/0xba0 21:46:04 ...: [ 602.520404] [<ffffffff811134a8>] ? unmap_vmas+0x178/0x310 21:46:04 ...: [ 602.520413] [<ffffffff8115dbfa>] ? alloc_fd+0x10a/0x150 21:46:04 ...: [ 602.520419] [<ffffffff81141769>] do_sys_open+0x69/0x170 21:46:04 ...: [ 602.520425] [<ffffffff811418b0>] sys_open+0x20/0x30 21:46:04 ...: [ 602.520434] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b 21:46:04 ...: [ 602.520443] INFO: task mdadm:2283 blocked for more than 120 seconds. 21:46:04 ...: [ 602.520447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. 21:46:04 ...: [ 602.520451] mdadm D 0000000000000000 0 2283 2212 0x00000000 21:46:04 ...: [ 602.520460] ffff88002cca7d98 0000000000000086 0000000000015bc0 0000000000015bc0 21:46:04 ...: [ 602.520468] ffff88002ededf78 ffff88002cca7fd8 0000000000015bc0 ffff88002ededbc0 21:46:04 ...: [ 602.520475] 0000000000015bc0 ffff88002cca7fd8 0000000000015bc0 ffff88002ededf78 21:46:04 ...: [ 602.520483] Call Trace: 21:46:04 ...: [ 602.520492] [<ffffffff81543a97>] __mutex_lock_slowpath+0xf7/0x180 21:46:04 ...: [ 602.520500] [<ffffffff8154397b>] mutex_lock+0x2b/0x50 21:46:04 ...: [ 602.520506] [<ffffffff8117404d>] __blkdev_put+0x3d/0x190 21:46:04 ...: [ 602.520512] [<ffffffff811741b0>] blkdev_put+0x10/0x20 21:46:04 ...: [ 602.520518] [<ffffffff811741f3>] blkdev_close+0x33/0x60 21:46:04 ...: [ 602.520526] [<ffffffff81145375>] __fput+0xf5/0x210 21:46:04 ...: [ 602.520533] [<ffffffff811454b5>] fput+0x25/0x30 21:46:04 ...: [ 602.520539] [<ffffffff811415ad>] filp_close+0x5d/0x90 21:46:04 ...: [ 602.520545] [<ffffffff81141697>] sys_close+0xb7/0x120 21:46:04 ...: [ 602.520552] [<ffffffff810121b2>] system_call_fastpath+0x16/0x1b

  Read the article

• CentOS - Add additional hard drive raid arrays on Dell Perc 5/i card

  - by Quanano

  We have a Dell Poweredge 2900 system with Dell Perc 5/i card and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on one raid array on this controller with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l: Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v: [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod: Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log blkid: /dev/sda1: UUID="bc4777d9-ae2c-4c58-96ea-cedb342b8338" TYPE="ext4" /dev/sda2: UUID="j2wRZr-Mlko-QWBR-BndC-V2uN-vdhO-iKCuYu" TYPE="LVM2_member" /dev/mapper/vg_lal2server-lv_root: UUID="9238208a-1daf-4c3c-aa9b-469f0387ebee" TYPE="ext4" /dev/mapper/vg_lal2server-lv_swap: UUID="dbefb39c-5871-4bc9-b767-1ef18f12bd3d" TYPE="swap" /dev/mapper/vg_lal2server-lv_home: UUID="ec698993-08b7-443e-84f0-9f9cb31c5da8" TYPE="ext4" dmesg shows: megaraid_sas: fw state:c0000000 megasas: fwstate:c0000000, dis_OCR=0 scsi2 : LSI SAS based MegaRAID driver scsi 2:0:0:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:1:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:2:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:3:0: Direct-Access SEAGATE ST3146855SS S527 PQ: 0 ANSI: 5 scsi 2:0:4:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:5:0: Direct-Access HITACHI HUS154545VLS300 D590 PQ: 0 ANSI: 5 scsi 2:0:8:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 scsi 2:0:9:0: Direct-Access FUJITSU MBA3073RC D305 PQ: 0 ANSI: 5 i.e. the 3 RAID Arrays Seagate Hitatchi and Fujitsu hard drives respectively. FURTHER UPDATE I have installed the megaraid storage manager console and connected to the server. It appears that the two CentOS installation hard drives are OK. The other 6 drives, one raid array of 4 and one raid array of 2 disks. The other drives are listed as (Foreign) Unconfigured Good.

  Read the article

• Visual Basic Cryptography Question

  - by Glenn Sullivan

  I am trying to mimic the results of some C code that uses the OpenSSL library using the system.security.crytography library in the .net 3.5 world, and I can't seem to get it right. I need some help... part of the issue is my understanding of crytography in general. Here's what is supposed to happen: I send a request for authentication to a device. It returns a challenge digest, which I then need to sign with a known key and return The device returns a "success" or "Fail" message. I have the following code snippet that I am trying to "copy": //Seed the PRNG //Cheating here - the PRNG will be seeded when we create a key pair //The key pair is discarded only doing this to seed the PRNG. DSA *temp_dsa = DSA_new(); if(!temp_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } unsigned char seed[20] = "Our Super Secret Key"; temp_dsa = DSA_generate_parameters(128, seed, sizeof(seed), NULL, NULL, NULL, NULL); DSA_free(temp_dsa); //A pointer to the private key. p = (unsigned char *)&priv_key; //Create and allocate a DSA structure from the private key. DSA *priv_dsa = NULL; priv_dsa = d2i_DSAPrivateKey(NULL, &p, sizeof(priv_key)); if(!priv_dsa) { printf("Error: The client had an error with the DSA API\n"); exit(0); } //Allocate memory for the to be computed signature. sigret = OPENSSL_malloc(DSA_size(priv_dsa)); //Sign the challenge digest recieved from the ISC. retval = DSA_sign(0, pResp->data, pResp->data_length, sigret, &siglen, priv_dsa); A few more bits of information: priv_key is a 252 element character array of hex characters that is included. The end result is a 512 (or less) array of characters to send back for validation to the device. Rasmus asked to see the key array. Here it is: unsigned char priv_key[] = {0x30, 0x81, 0xf9, 0x02, 0x01, 0x00, 0x02, 0x41, 0x00, 0xfe, 0xca, 0x97, 0x55, 0x1f, 0xc0, 0xb7, 0x1f, 0xad, 0xf0, 0x93, 0xec, 0x4b, 0x31, 0x94, 0x78, 0x86, 0x82, 0x1b, 0xab, 0xc4, 0x9e, 0x5c, 0x40, 0xd9, 0x89, 0x7d, 0xde, 0x43, 0x38, 0x06, 0x4f, 0x1b, 0x2b, 0xef, 0x5c, 0xb7, 0xff, 0x21, 0xb1, 0x11, 0xe6, 0x9a, 0x81, 0x9a, 0x2b, 0xef, 0x3a, 0xbb, 0x5c, 0xea, 0x76, 0xae, 0x3a, 0x8b, 0x92, 0xd2, 0x7c, 0xf1, 0x89, 0x8e, 0x4d, 0x3f, 0x0d, 0x02, 0x15, 0x00, 0x88, 0x16, 0x1b, 0xf5, 0xda, 0x43, 0xee, 0x4b, 0x58, 0xbb, 0x93, 0xea, 0x4e, 0x2b, 0xda, 0xb9, 0x17, 0xd1, 0xff, 0x21, 0x02, 0x41, 0x00, 0xf6, 0xbb, 0x45, 0xea, 0xda, 0x72, 0x39, 0x4f, 0xc1, 0xdd, 0x02, 0xb4, 0xf3, 0xaa, 0xe5, 0xe2, 0x76, 0xc7, 0xdc, 0x34, 0xb2, 0x0a, 0xd8, 0x69, 0x63, 0xc3, 0x40, 0x2c, 0x58, 0xea, 0xa6, 0xbd, 0x24, 0x8b, 0x6b, 0xaa, 0x4b, 0x41, 0xfc, 0x5f, 0x21, 0x02, 0x3c, 0x27, 0xa9, 0xc7, 0x7a, 0xc8, 0x59, 0xcd, 0x5b, 0xdd, 0x6c, 0x44, 0x48, 0x86, 0xd1, 0x34, 0x46, 0xb0, 0x89, 0x55, 0x50, 0x87, 0x02, 0x41, 0x00, 0x80, 0x29, 0xc6, 0x4a, 0x08, 0x3e, 0x30, 0x54, 0x71, 0x9b, 0x95, 0x49, 0x55, 0x17, 0x70, 0xc7, 0x96, 0x65, 0xc8, 0xc2, 0xe2, 0x8a, 0xe0, 0x5d, 0x9f, 0xe4, 0xb2, 0x1f, 0x20, 0x83, 0x70, 0xbc, 0x88, 0x36, 0x03, 0x29, 0x59, 0xcd, 0xc7, 0xcd, 0xd9, 0x4a, 0xa8, 0x65, 0x24, 0x6a, 0x77, 0x8a, 0x10, 0x88, 0x0d, 0x2f, 0x15, 0x4b, 0xbe, 0xba, 0x13, 0x23, 0xa1, 0x73, 0xa3, 0x04, 0x37, 0xc9, 0x02, 0x14, 0x06, 0x8e, 0xc1, 0x41, 0x40, 0xf1, 0xf6, 0xe1, 0xfa, 0xfb, 0x64, 0x28, 0x02, 0x15, 0xce, 0x47, 0xaa, 0xce, 0x6e, 0xfe}; Can anyone help me translate this code to it's VB.net crypto equivalent? TIA, Glenn

  Read the article

• Android ProgressDialog Progress Bar doing things in the right order

  - by FauxReal

  I just about got this, but I have a small problem in the order of things going off. Specifically, in my thread() I am setting up an array that is used by a Spinner. Problem is the Spinner is all set and done basically before my thread() is finished, so it sets itself up with a null array. How do I associate the spinners ArrayAdapter with an array that is being loaded by another thread? I've cut the code down to what I think is necessary to understand the problem, but just let me know if more is needed. The problem occurs whether or not refreshData() is called. Along the same lines, sometimes I want to call loadData() from the menu. Directly following loadData() if I try to fire a toast on the next line this causes a forceclose, which is also because of how I'm implementing ProgressDialog. THANK YOU FOR LOOKING public class CMSHome extends Activity { private static List<String> pmList = new ArrayList<String>(); // Instantiate helpers PMListHelper plh = new PMListHelper(); ProjectObjectHelper poc = new ProjectObjectHelper(); // These objects hold lists and methods for dealing with them private Employees employees; private Projects projects; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); // Loads data from filesystem, or webservice if necessary loadData(); // Capture spinner and associate pmList with it through ArrayAdapter spinner = (Spinner) findViewById(R.id.spinner); ArrayAdapter<String> adapter = new ArrayAdapter<String>( this, android.R.layout.simple_spinner_item, pmList); adapter.setDropDownViewResource(android.R.layout.simple_spinner_dropdown_item); spinner.setAdapter(adapter); //---the button is wired to an event handler--- Button btn1 = (Button)findViewById(R.id.btnGetProjects); btn1.setOnClickListener(btnListAllProjectsListener); spinner.setOnItemSelectedListener(new MyOnItemSelectedListener()); } private void loadData() { final ProgressDialog pd = ProgressDialog.show(this, "Please wait", "Loading Data...", true, false); new Thread(new Runnable(){ public void run(){ employees = plh.deserializeEmployeeData(); projects = poc.deserializeProjectData(); // Check to see if data actually loaded, if not then refresh if ((employees == null) || (projects == null)) { refreshData(); } // Load up pmList for spinner control pmList = employees.getPMList(); pd.dismiss(); } }).start(); } private void refreshData() { // Refresh data for Projects projects = poc.refreshData(); poc.saveProjectData(mCtx, projects); // Refresh data for PMList employees = plh.refreshData(); plh.savePMData(mCtx, employees); } } <---- EDIT ----- I tried changing loadData() to the following after Jims suggestion. Not sure if I did this right, still doesn't work: private void loadData() { final ProgressDialog pd = ProgressDialog.show(this, "Please wait", "Loading Data...", true, false); new Thread(new Runnable(){ public void run(){ employees = plh.deserializeEmployeeData(); projects = poc.deserializeProjectData(); // Check to see if data actually loaded, if not return false if ((employees == null) || (projects == null)) { refreshData(); } pd.dismiss(); runOnUiThread(new Runnable() { public void run(){ // Load up pmList for spinner control pmList = employees.getPMList(); } }); } }).start(); }

  Read the article

• MVC 2 Ajax.Beginform passes returned Html to javascript function

  - by Joe

  Hi, I have a small partial Create Person form in a page above a table of results. I want to be able to post the form to the server, which I can do no problem with ajax.Beginform. <% using (Ajax.BeginForm("Create", new AjaxOptions { OnComplete = "ProcessResponse" })) {%> <fieldset> <legend>Fields</legend> <div class="editor-label"> <%=Html.LabelFor(model => model.FirstName)%> </div> <div class="editor-field"> <%=Html.TextBoxFor(model => model.FirstName)%> <%=Html.ValidationMessageFor(model => model.FirstName)%> </div> <div class="editor-label"> <%=Html.LabelFor(model => model.LastName)%> </div> <div class="editor-field"> <%=Html.TextBoxFor(model => model.LastName)%> <%=Html.ValidationMessageFor(model => model.LastName)%> </div> <p> <input type="submit" /> </p> </fieldset> <% } %> Then in my controller I want to be able to post back a partial which is just a table row if the create is successful and append it to the table, which I can do easily with jquery. $('#personTable tr:last').after(data); However, if server validation fails I want to pass back my partial create person form with the validation errors and replace the existing Create Person form. I have tried returning a Json array Controller: return Json(new { Success = true, Html= this.RenderViewToString("PersonSubform",person) }); Javascript: var json_data = response.get_response().get_object(); with a pass/fail flag and the partial rendered as a string using the solition below but that doesnt render the mvc validation controls when the form fails. SO RenderPartialToString So, is there any way I can hand my javascript the out of the box PartialView("PersonForm") as its returned from my ajax.form? Can I pass some addition info as a Json array so I can tell if its pass or fail and maybe add a message? UPDATE I can now pass the HTML of a PartialView to my javascript but I need to pass some additional data pairs like ServerValidation : true/false and ActionMessage : "you have just created a Person Bill". Ideally I would pass a Json array rather than hidden fields in my partial. function ProcessResponse(response) { var html = response.get_data(); $("#campaignSubform").html(html); } Many thanks in advance

  Read the article

• Flex, Papervision3d: basic scenes, cameras, planes issue

  - by user157880

  // Import Papervision3D import org.papervision3d.Papervision3D; import org.papervision3d.scenes.; import org.papervision3d.cameras.; import org.papervision3d.objects.; import org.papervision3d.materials.; public var scene:Scene3D; public var camera:Camera3D; public var target:DisplayObject3D; public var screenshotArray: Array;//array to store pictures public var radius:Number; public var image:Image; private function initPapervision():void { target= new DisplayObject3D(); camera= new Camera3D(target); 1067: Implicit coercion of a value of type org.papervision3d.objects:DisplayObject3D to an unrelated type Number. scene= new Scene3D(thisContainer); 1137: Incorrect number of arguments. Expected no more than 0. scene.addChild( new DisplayObject3D() , "center" ); } public function handleCreationComplete():void { image = new Image(); image.source = "one_t.jpg"; image.maintainAspectRatio = true; image.scaleContent = false; image.autoLoad = false; image.addEventListener(Event.COMPLETE, handleImageLoad); image.load(); initPapervision(); } public function handleImageLoad(event:Event):void { init3D(); // onEnterFrame addEventListener( Event.ENTER_FRAME, loop3D ); addEventListener( MouseEvent.MOUSE_MOVE , handleMouseMove); } public function init3D():void { addScreenshots(20); } public function handleMouseMove(event:MouseEvent):void { camera.y = Math.max( thisContainer.mouseY*5 , -450 ); } public function addScreenshots(planeCount:Number):void { var obj:DisplayObject3D = scene.getChildByName ("center"); screenshotArray = new Array(planeCount); var texture:BitmapData = new BitmapData(image.content.loaderInfo.width, image.content.loaderInfo.height, false, 0); texture.draw(image); // Create texture with a bitmap from the library var materialSpace :MaterialObject3D = new BitmapMaterial(texture); materialSpace.doubleSided = true; materialSpace.smooth = false; radius = 500; camera.z = radius + 50; camera.y = 50; for (var i:Number = 0; i < planeCount; i++ ) { screenshotArray[i] = new Object() <b>screenshotArray[i].plane = new Plane( materialSpace, 100, 100, 2, 2 );</b> 1180: Call to a possibly undefined method Plane. // Position plane var rotation:Number = (360/planeCount)* i ; var rotationRadians:Number = (rotation-90) * (Math.PI/180); screenshotArray[i].rotation = rotation; screenshotArray[i].plane.z = (radius * Math.cos(rotationRadians) ) * -1; screenshotArray[i].plane.x = radius * Math.sin(rotationRadians) * -1; screenshotArray[i].plane.y = 100; screenshotArray[i].plane.lookAt(obj); // Add to scene scene.addChild( screenshotArray[i].plane ); } <b>scene.renderCamera(camera);</b> <i>1061: Call to a possibly undefined method renderCamera through a reference with static type org.papervision3d.scenes:Scene3D.</i> } public function loop3D(event:Event):void { var obj:DisplayObject3D = scene.getChildByName ("center"); for (var i:Number = 0; i < screenshotArray.length ; i++ ) { var rotation:Number = screenshotArray[i].rotation; rotation += (thisContainer.mouseX/50)/(screenshotArray.length/10); var rotationRadians:Number = (rotation-90) * (Math.PI/180); screenshotArray[i].rotation = rotation; screenshotArray[i].plane.z = (radius * Math.cos(rotationRadians) ) * -1; screenshotArray[i].plane.x = radius * Math.sin(rotationRadians) * -1; screenshotArray[i].plane.lookAt(obj); } //now lets render the scene <b>scene.renderCamera(camera);</b> <i>1061: Call to a possibly undefined method renderCamera through a reference with static type org.papervision3d.scenes:Scene3D.</i> } ]]

  Read the article

• Connection Reset on MySQL query

  - by sunwukung

  OK, I'm flummoxed. I'm trying to execute a query on a database (locally) and I keep getting a connection reset error. I've been using the method below in a generic DAO class to build a query string and pass to Zend_Db API. public function insert($params) { $loop = false; $keys = $values = ''; foreach($params as $k => $v){ if($loop == true){ $keys .= ','; $values .= ','; } $keys .= $this->db->quoteIdentifier($k); $values .= $this->db->quote($v); $loop = true; } $sql = "INSERT INTO " . $this->table_name . " ($keys) VALUES ($values)"; //formatResult returns an array of info regarding the status and any result sets of the query //I've commented that method call out anyway, so I don't think it's that try { $this->db->query($sql); return $this->formatResult(array( true, 'New record inserted into: '.$this->table_name )); }catch(PDOException $e) { return $this->formatResult($e); } } So far, this has worked fine - the errors have been occurring since we generated new tables to record user input. The insert string looks like this: INSERT INTO tablename(`id`,`title`,`summary`,`description`,`keywords`,`type_id`,`categories`) VALUES ('5539','Sample Title','Sample content',' \'Lorem ipsum dolor sit amet, consectetur adipiscing elit. In et pellentesque mauris. Curabitur hendrerit, leo id ultrices pellentesque, est purus mattis ligula, vitae imperdiet neque ligula bibendum sapien. Curabitur aliquet nisi et odio pharetra tincidunt. Phasellus sed iaculis nisl. Fusce commodo mauris et purus vehicula dictum. Nulla feugiat molestie accumsan. Donec fermentum libero in risus tempus elementum aliquam et magna. Fusce vitae sem metus. Aenean commodo pharetra risus, nec pellentesque augue ullamcorper nec. Class aptent taciti sociosqu ad litora torquent per conubia nostra, per inceptos himenaeos. Nullam vel elit libero. Vestibulum in turpis nunc.\'','this,is,a,sample,array',1,'category title') You'll probably notice the big chunk of whitespace before the Lorem Ipsum string. The description field is being populated from a TinyMCE textarea - I'm guessing it's chucking in some line returns, so I've tried stripping those out. However, even if I disable the TinyMCE field, the reset error still occurs. The next port of call was checking the limits on the table, since it seems to insert if the length of "description" is around the 300 mark (it varies between 310 - 330). The field limit is set to VARCHAR(1500) and the validation on this field won't allow anything past bigger than 1200 with HTML, 800 without. The real kicker is that if I take this sql string and execute it via the command line, it works fine - so I can't for the life of me figure out what's wrong. So, in a nutshell, I'm stumped. Any ideas?

  Read the article

• Using times on the Android platform.

  - by Tarmon

  Hey Everyone, I have a lot of time information in the format of hh:mm and I was wondering if there is a good way to take this information and compare it to the current time. Say I have a list of times for a day and I want to find out which time in this array of strings is the first that has not already past in this day. I was looking at the Calender API and I figured I could break the strings up into hours and minutes by splitting it at the ":" and then create a calender object from that but that seems rather inefficient. Just looking for some input; thanks, Rob <string-array name="example"> <item>6:58</item> <item>7:41</item> <item>8:08</item> <item>8:28</item> <item>8:48</item> <item>9:08</item> <item>9:43</item> <item>10:13</item> <item>10:43</item> <item>11:13</item> <item>11:43</item> <item>12:09</item> <item>12:29</item> <item>12:49</item> <item>1:09</item> <item>1:29</item> <item>1:49</item> <item>2:09</item> <item>2:29</item> <item>2:49</item> <item>3:09</item> <item>3:29</item> <item>3:49</item> <item>4:09</item> <item>4:29</item> <item>4:49</item> <item>5:09</item> <item>5:29</item> <item>5:49</item> <item>6:29</item> <item>7:09</item> <item>7:47</item> <item>8:27</item> <item>9:07</item> <item>9:47</item> <item>10:27</item> </string-array>

  Read the article

• Get Asynchronous HttpResponse through Silverlight (F#)

  - by jack2010

  I am a newbie with F# and SL and playing with getting asynchronous HttpResponse through Silverlight. The following is the F# code pieces, which is tested on VS2010 and Window7 and works well, but the improvement is necessary. Any advices and discussion, especially the callback part, are welcome and great thanks. module JSONExample open System open System.IO open System.Net open System.Text open System.Web open System.Security.Authentication open System.Runtime.Serialization [<DataContract>] type Result<'TResult> = { [<field: DataMember(Name="code") >] Code:string [<field: DataMember(Name="result") >] Result:'TResult array [<field: DataMember(Name="message") >] Message:string } // The elements in the list [<DataContract>] type ChemicalElement = { [<field: DataMember(Name="name") >] Name:string [<field: DataMember(Name="boiling_point") >] BoilingPoint:string [<field: DataMember(Name="atomic_mass") >] AtomicMass:string } //http://blogs.msdn.com/b/dsyme/archive/2007/10/11/introducing-f-asynchronous-workflows.aspx //http://lorgonblog.spaces.live.com/blog/cns!701679AD17B6D310!194.entry type System.Net.HttpWebRequest with member x.GetResponseAsync() = Async.FromBeginEnd(x.BeginGetResponse, x.EndGetResponse) type RequestState () = let mutable request : WebRequest = null let mutable response : WebResponse = null let mutable responseStream : Stream = null member this.Request with get() = request and set v = request <- v member this.Response with get() = response and set v = response <- v member this.ResponseStream with get() = responseStream and set v = responseStream <- v let allDone = new System.Threading.ManualResetEvent(false) let getHttpWebRequest (query:string) = let query = query.Replace("'","\"") let queryUrl = sprintf "http://api.freebase.com/api/service/mqlread?query=%s" "{\"query\":"+query+"}" let request : HttpWebRequest = downcast WebRequest.Create(queryUrl) request.Method <- "GET" request.ContentType <- "application/x-www-form-urlencoded" request let GetAsynResp (request : HttpWebRequest) (callback: AsyncCallback) = let myRequestState = new RequestState() myRequestState.Request <- request let asyncResult = request.BeginGetResponse(callback, myRequestState) () // easy way to get it to run syncrnously w/ the asynch methods let GetSynResp (request : HttpWebRequest) : HttpWebResponse = let response = request.GetResponseAsync() |> Async.RunSynchronously downcast response let RespCallback (finish: Stream -> _) (asynchronousResult : IAsyncResult) = try let myRequestState : RequestState = downcast asynchronousResult.AsyncState let myWebRequest1 : WebRequest = myRequestState.Request myRequestState.Response <- myWebRequest1.EndGetResponse(asynchronousResult) let responseStream = myRequestState.Response.GetResponseStream() myRequestState.ResponseStream <- responseStream finish responseStream myRequestState.Response.Close() () with | :? WebException as e -> printfn "WebException raised!" printfn "\n%s" e.Message printfn "\n%s" (e.Status.ToString()) () | _ as e -> printfn "Exception raised!" printfn "Source : %s" e.Source printfn "Message : %s" e.Message () let printResults (stream: Stream)= let result = try use reader = new StreamReader(stream) reader.ReadToEnd(); finally () let data = Encoding.Unicode.GetBytes(result); let stream = new MemoryStream() stream.Write(data, 0, data.Length); stream.Position <- 0L let JsonSerializer = Json.DataContractJsonSerializer(typeof<Result<ChemicalElement>>) let result = JsonSerializer.ReadObject(stream) :?> Result<ChemicalElement> if result.Code<>"/api/status/ok" then raise (InvalidOperationException(result.Message)) else result.Result |> Array.iter(fun element->printfn "%A" element) let test = // Call Query (w/ generics telling it you wand an array of ChemicalElement back, the query string is wackyJSON too –I didn’t build it don’t ask me! let request = getHttpWebRequest "[{'type':'/chemistry/chemical_element','name':null,'boiling_point':null,'atomic_mass':null}]" //let response = GetSynResp request let response = GetAsynResp request (AsyncCallback (RespCallback printResults)) () ignore(test) System.Console.ReadLine() |> ignore

  Read the article

• Check Checkboxes dynamically

  - by Selom

  Hi, ive been dealing with this for some time now and need your help. well I have an array $arrayAmenities which contains a combination of the following data based on what is fetched from the database: Air Conditioned Bar Brunch Party Room Tea Room Terrace Valet I would like the application to dynamically check the following set of checkboxes based on the data contained in the array. With my code only one checkbox is checked based on the first data contained in the array. Can you please tell what Im missing? Thanks for answering. code: //get amenities one by one in order to set the checkboxes $arrayAmenities = explode(',', $rest_amenities ); $i=0; while(count($arrayAmenities) > $i) { var_dump($arrayAmenities[$i]); switch($arrayAmenities[$i]) { case 'Air Conditioned': $checkedAir = 'checked=true'; break; case 'Bar': $checkedBar = 'checked=true'; break; case 'Brunch': $checkedBru = 'checked=true'; break; case 'Party Room'; $checkedPar = 'checked=true'; break; } $i+=1; } } checkboxes <table cellpadding="0" cellspacing="0" style="font-size:10px"> <tr> <td style="border-top:1px solid #CCC;border-right:1px solid #CCC;border-left:1px solid #CCC; padding-left:5px ">Air Conditioned <input type="checkbox" name="air_cond" <?php print $checkedAir;?> value="Air Conditioned"></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC;">Bar <input type="checkbox" name="bar" value="Bar" <?php print $checkedBar;?>></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; ">Brunch <input type="checkbox" name="brunch" value="Brunch" <?php print $checkedBru;?>></td> </tr> <tr> <td style="border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC; border-left:1px solid #CCC; padding-left:5px">Party Room <input <?php print $checkedPar;?> type="checkbox" name="party_room" value="Party Room" ></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC;">Tea Room <input type="checkbox" name="tea_room" value="Tea Room" ></td> <td style="padding-left:10px; border-top:1px solid #CCC;border-right:1px solid #CCC; border-bottom:1px solid #CCC;">Terrace <input type="checkbox" name="terrace" value="Terrace"></td> </tr> <tr> <td colspan="3" style="border-bottom:1px solid #CCC; border-left:1px solid #CCC; border-right:1px solid #CCC; padding-left:5px">Valet <input type="checkbox" name="valet" value="Valet" ></td> </tr> </table>

  Read the article

• Ruby. Mongoid. Relations

  - by Scepion1d

  I've encountered some problems with MongoID. I have three models: require 'mongoid' class Configuration include Mongoid::Document belongs_to :user field :links, :type => Array field :root, :type => String field :objects, :type => Array field :categories, :type => Array has_many :entries end class TimeDim include Mongoid::Document field :day, :type => Integer field :month, :type => Integer field :year, :type => Integer field :day_of_week, :type => Integer field :minute, :type => Integer field :hour, :type => Integer has_many :entries end class Entry include Mongoid::Document belongs_to :configuration belongs_to :time_dim field :category, :type => String # any other dynamic fields end Creating documents for Configurations and TimeDims is successful. But when i've trying to execute following code: params = Hash.new params[:configuration] = config # an instance of Configuration from DB entry.each do |key, value| params[key.to_sym] = value # String end unless Entry.exists?(conditions: params) params[:time_dim] = self.generate_time_dim # an instance of TimeDim from DB params[:category] = self.detect_category(descr) # String Entry.new(params).save end ... i saw following output: /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/bson-1.6.1/lib/bson/bson_c.rb:24:in `serialize': Cannot serialize an object of class Configuration into BSON. (BSON::InvalidDocument) from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/bson-1.6.1/lib/bson/bson_c.rb:24:in `serialize' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/cursor.rb:604:in `construct_query_message' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/cursor.rb:465:in `send_initial_query' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/cursor.rb:458:in `refresh' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/cursor.rb:128:in `next' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/db.rb:509:in `command' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongo-1.6.1/lib/mongo/cursor.rb:191:in `count' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/cursor.rb:42:in `block in count' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/collections/retry.rb:29:in `retry_on_connection_failure' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/cursor.rb:41:in `count' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/contexts/mongo.rb:93:in `count' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/criteria.rb:45:in `count' from /home/scepion1d/Workspace/RubyMine/dana-x/.bundle/ruby/1.9.1/gems/mongoid-2.4.6/lib/mongoid/finders.rb:60:in `exists?' from /home/scepion1d/Workspace/RubyMine/dana-x/crawler/crawler.rb:110:in `block (2 levels) in push_entries_to_db' from /home/scepion1d/Workspace/RubyMine/dana-x/crawler/crawler.rb:103:in `each' from /home/scepion1d/Workspace/RubyMine/dana-x/crawler/crawler.rb:103:in `block in push_entries_to_db' from /home/scepion1d/Workspace/RubyMine/dana-x/crawler/crawler.rb:102:in `each' from /home/scepion1d/Workspace/RubyMine/dana-x/crawler/crawler.rb:102:in `push_entries_to_db' from main_starter.rb:15:in `<main>' Can anyone tell what am I doing wrong?

  Read the article

• Problem to cretate dynamic radio button in flex.

  - by nemade-vipin

  hi friends, I am creating the flex ARI application in which I am accessing the webservice method this method is returning me a childList.I am accessing it in my flex appliction using the Array object in my action script code.Now I want to cretate one flex page in which I get child list with radio button.I have done it using Arraycollection in which i put all the child name.Now I am getting each child name in mxml using the Repeater component in mxml.But I have problem is that I am getting the only list of child name.I also want to get child id for to set value for each radio button. how can I refer same childname and it's id for radio button using same Arraycollection list.my code is import mx.controls.*; [Bindable] private var childName:ArrayCollection; private var photoFeed:ArrayCollection; private var arrayOfchild:Array; [Bindable] private var childObj:Child; public var user:SBTSWebService; public function initApp():void { user = new SBTSWebService(); user.addSBTSWebServiceFaultEventListener(handleFaults); } public function displayString():void { // Instantiate a new Entry object. var newEntry:GetSBTSMobileAuthentication = new GetSBTSMobileAuthentication(); newEntry.mobile=mobileno.text; newEntry.password=password.text; user.addgetSBTSMobileAuthenticationEventListener(authenticationResult); user.getSBTSMobileAuthentication(newEntry); } public function handleFaults(event:FaultEvent):void { Alert.show("A fault occured contacting the server. Fault message is: " + event.fault.faultString); } public function authenticationResult(event:GetSBTSMobileAuthenticationResultEvent):void { if(event.result != null) { if(event.result._return > 0) { var UserId:int = event.result._return; getChildList(UserId); viewstack2.selectedIndex=1; } else { Alert.show("Authentication fail"); } } } public function getChildList(userId:int):void { var childEntry:GetSBTSMobileChildrenInfo = new GetSBTSMobileChildrenInfo(); childEntry.UserId = userId; user.addgetSBTSMobileChildrenInfoEventListener(sbtsChildrenInfoResult); user.getSBTSMobileChildrenInfo(childEntry); } public function sbtsChildrenInfoResult(event:GetSBTSMobileChildrenInfoResultEvent):void { if(event.result != null && event.result._return!=null) { arrayOfchild = event.result._return as Array; photoFeed = new ArrayCollection(arrayOfchild); childName = new ArrayCollection(); for( var count:int=0;count<photoFeed.length;count++) { childObj = photoFeed.getItemAt(count,0) as Child; childName.addItem(childObj.strName); } } } ]]> <mx:Panel width="500" height="300" headerColors="[#000000,#FFFFFF]"> <mx:TabNavigator id="viewstack2" selectedIndex="0" creationPolicy="all" width="100%" height="100%"> <mx:Form label="Login Form"> <mx:FormItem label="Mobile NO:"> <mx:TextInput id="mobileno" /> </mx:FormItem> <mx:FormItem label="Password:"> <mx:TextInput displayAsPassword="true" id="password" /> </mx:FormItem> <mx:FormItem> <mx:Button label="Login" click="displayString()"/> </mx:FormItem> </mx:Form> <mx:Form label="Child List"> <mx:Label width="100%" color="blue" text="Select Child."/> <mx:RadioButtonGroup id="radioGroup" /> <mx:Repeater id="fieldRepeater" dataProvider="{childName}"> <mx:RadioButton groupName="radioGroup" label="{fieldRepeater.currentItem}"/> </mx:Repeater> </mx:Form> <mx:Form label="Child Information"> </mx:Form> <mx:Form label="Trace Path"> </mx:Form> </mx:TabNavigator> </mx:Panel> please tell me the sol.

  Read the article

• Chaining CSS classes in IE6 - Trying to find a jQuery solution?

  - by Mike Baxter

  Right, perhaps I ask the impossible? I consider myself fairly new to Javscript and jQuery, but that being said, I have written some fairly complex code recently so I am definitely getting there... however I am now possed with a rather interesting issue at my current freelance contract. The previous web coder has taken a Grid-960 approach to the HTML and as a result has used chained classes to style many of the elements. The example below is typical of what can be found in the code: <div class='blocks four-col-1 orange highlight'>Some content</div> And in the css there will be different declarations for: (not actual css... but close enough) .blocks {margin-right:10px;} .orange {background-image:url(someimage.jpg);} .highlight {font-weight:bold;} .four-col-1 {width:300px;} and to make matters worse... this is in the CSS: .blocks.orange.highlight {background-colour:#dd00ff;} Anyone not familiar with this particular bug can read more on it here: http://www.ryanbrill.com/archives/multiple-classes-in-ie/ it is very real and very annoying. Without wanting to go into the merrits of not chaining classes (I told them this, but it is no longer feasible to change their approach... 100 hand coded pages into a 150 page website, no CMS... sigh) and without the luxury of being able to change the way these blocks are styled... can anyone advise me on the complexity and benefits between any of my below proposed approaches or possible other options that would adequately solve this problem. Potential Solution 1 Using conditional comments I am considering loading a jquery script only for IE6 that: Reads the class of all divs in a certain section of the page and pushes to an array creates empty boxes off screen with only one of the classes applied at a time Reads the applied CSS values for each box Re-applies these styles to the individual box, somehow bearing in mind the order in which they are called and overwriting conflicting instructions as required Potential Solution 2 read the class of all divs in a certain section of the page and push to an array Scan the document for links to style sheets Ajax grab the stylesheets and traverse looking for matching names to those in class array Apply styles as needed Potential Solution 3 Create an IE6 only stylesheet containing the exact style to be applied as a unique name (ie: class='blocks orange highlight' becomes class='blocks-orange-highlight') Traverse the document in IE6 and convert all spaces in class declarations to hyphens and reapply classes based on new style name Summary: Solution 1 allows the people at this company to apply any styles in the future and the script will adjust as needed. However it does not allow for the chained style to be added, only the individual style... it is also processor intensive and time consuming, but also the most likely to be converted into a plugin that could be used the world over Solution 2 is a potential nightmare to code. But again will allow for an endless number of updates without breaking Solution 3 will require someone at the companty to hardcode the new styles every time they make a change, and if they don't, IE6 will break. Ironically the site, whilst needing to conform to IE6 in a limited manner, does not need to run wihtout javascript (they've made the call... have JS or go away), so consider all jQuery and JS solutions to be 'game on'. Did I mention how much i hate IE6? Anyway... any thoughts or comments would be appreciated. I will continue to develop my own solution and if I discover one that can be turned into a jQuery plugin I will post it here in the comments. Regards, Mike.

  Read the article

• How to immediate send mail without prompt confirmation dialog

  - by lmengyew

  I'm using Delphi XE3 and below is my sample application: unit Unit1; interface uses Winapi.Windows, Winapi.Messages, System.SysUtils, System.Variants, System.Classes, Vcl.Graphics, Vcl.Controls, Vcl.Forms, Vcl.Dialogs, Vcl.StdCtrls; type TForm1 = class(TForm) Button1: TButton; procedure Button1Click(Sender: TObject); private function Send(const FromAddr, ToAddr, Subject: String; const AttachFiles: array of string; const MsgBody: String): boolean; end; var Form1: TForm1; implementation uses Winapi.Mapi; {$R *.dfm} procedure TForm1.Button1Click(Sender: TObject); begin Send('', '[email protected]', 'test', [], ''); end; function TForm1.Send(const FromAddr, ToAddr, Subject: String; const AttachFiles: array of string; const MsgBody: String): boolean; var Msg: TMapiMessage; lpSender, lpRecipient: TMapiRecipDesc; Attach: array of TMapiFileDesc; SMTP: TFNMapiSendMail; MAPIModule: HModule; i: integer; S: string; begin Result := False; FillChar(Msg, SizeOf(Msg), 0); Msg.lpszSubject := PAnsiChar(UTF8String(Subject)); Msg.lpszNoteText := PAnsiChar(UTF8String(MsgBody)); if FromAddr <> '' then begin lpSender.ulRecipClass := MAPI_ORIG; lpSender.lpszName := PAnsiChar(UTF8String(FromAddr)); lpSender.lpszAddress := PAnsiChar(UTF8String(FromAddr)); lpSender.ulReserved := 0; lpSender.ulEIDSize := 0; lpSender.lpEntryID := Nil; Msg.lpOriginator := @lpSender; end; if ToAddr <> '' then begin lpRecipient.ulRecipClass := MAPI_TO; lpRecipient.lpszName := PAnsiChar(UTF8String(ToAddr)); lpRecipient.lpszAddress := PAnsiChar(UTF8String(ToAddr)); lpRecipient.ulReserved := 0; lpRecipient.ulEIDSize := 0; lpRecipient.lpEntryID := Nil; Msg.nRecipCount := 1; Msg.lpRecips := @lpRecipient; end; SetLength(Attach, Length(AttachFiles)); FillChar(Attach[0], Length(Attach) * SizeOf(TMapiFileDesc), 0); i := 0; for S in AttachFiles do begin Attach[i].nPosition := Cardinal($FFFFFFFF); Attach[i].lpszPathName := PAnsiChar(UTF8String(S)); Inc(i); end; Msg.nFileCount := Length(AttachFiles); if Msg.nFileCount = 0 then Msg.lpFiles := nil else Msg.lpFiles := @Attach[0]; MAPIModule := LoadLibrary(PChar(MAPIDLL)); if MAPIModule <> 0 then begin try @SMTP := GetProcAddress(MAPIModule, 'MAPISendMail'); if @SMTP <> nil then Result := SMTP(0, Application.Handle, Msg, 0, 0) = SUCCESS_SUCCESS; finally FreeLibrary(MAPIModule); end; end; end; end. When i click the Button1, it will prompt the confirmation dialog as print screen. My question is how to immediate send mail without prompt the confirmation dialog? Is this possible to achieve?

  Read the article

• Facebook - Publish Checkins using Graph API

  - by Zany

  I'm trying to publish Checkin using Facebook Graph API. I've gone through Facebook API documentation (checkins) and also have the publish_checkins permission. However, my checkin is not getting published. May I know is there anything wrong or am I missing anything else? Thank you for your time :) fbmain.php $user = $facebook->getUser(); $access_token = $facebook->getAccessToken(); // Session based API call if ($user) { try { $me = $facebook->api('/me'); if($me) { $_SESSION['fbID'] = $me['id']; $uid = $me['id']; } } catch (FacebookApiException $e) { error_log($e); } } else { echo "<script type='text/javascript'>top.location.href='$loginUrl';</script>"; exit; } $loginUrl = $facebook->getLoginUrl( array( 'redirect_uri' => $redirect_url, 'scope' => status_update, publish_stream, publish_checkins, user_checkins, user_location, user_status' ) ); main.php (Updated: 18/6/2012 11.12pm) <?php include_once "fbmain.php"; if (!isset($_POST['latitude']) && !isset($_POST['longitude'])) { ?> <html> <head> //ajax POST of latitude and longitude </head> <body> <script type="text/javascript"> window.fbAsyncInit = function() { FB.init({ appId: '<?php echo $facebook->getAppID() ?>', cookie: true, xfbml: true, oauth: true, frictionlessRequests: true }); FB.Canvas.setAutoGrow(); }; (function() { var e = document.createElement('script'); e.async = true; e.src = document.location.protocol + '//connect.facebook.net/en_US/all.js'; document.getElementById('fb-root').appendChild(e); }()); </script> ... <input type="button" value="Check In!" onclick="checkin(<?=$facebook?>);"/></span> </body> </html> <?php } else { print_r($_POST['latitude']); print_r($_POST['longitude']); ?> <script type="text/javascript"> // not using latitude and longitude to test function checkin($fb) { try { $tryCatch = $facebook->api('/'.$_SESSION['fbID'].'/checkins', 'POST', array( 'access_token' => $fb->getAccessToken(), //corrected 'place' => '165122993538708', 'message' =>'I went to placename today', 'coordinates' => json_encode(array( 'latitude' => '1.3019399200902', 'longitude' => '103.84067653695' )) )); } catch(FacebookApiException $e) { $tryCatch=$e->getMessage(); } return $tryCatch; } </script> <?php } ?>

  Read the article

• OpenGL-ES Texture Mapping. Texture is reversed?

  - by Feet

  I am trying to get my head around Texture mapping, I thought I had it the other day after asking this. However, I am having some trouble with my texture coordinates being flipped from what I am expecting. I am loading my texture like so int[] textures = new int[1]; gl.glGenTextures(1, textures, 0); _textureID = textures[0]; gl.glBindTexture(GL10.GL_TEXTURE_2D, _textureID); Bitmap bmp = BitmapFactory.decodeResource( _context.getResources(), R.drawable.die_1); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bmp, 0); gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterx(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); bmp.recycle(); My cube is this float vertices[] = { // Front face -width, -height, depth, // 0 width, -height, depth, // 1 width, height, depth, // 2 -width, height, depth, // 3 // Back Face width, -height, -depth, // 4 -width, -height, -depth, // 5 -width, height, -depth, // 6 width, height, -depth, // 7 // Left face -width, -height, -depth, // 8 -width, -height, depth, // 9 -width, height, depth, // 10 -width, height, -depth, // 11 // Right face width, -height, depth, // 12 width, -height, -depth, // 13 width, height, -depth, // 14 width, height, depth, // 15 // Top face -width, height, depth, // 16 width, height, depth, // 17 width, height, -depth, // 18 -width, height, -depth, // 19 // Bottom face -width, -height, -depth, // 20 width, -height, -depth, // 21 width, -height, depth, // 22 -width, -height, depth, // 23 }; short indices[] = { // Front 0,1,2, 0,2,3, // Back 4,5,6, 4,6,7, // Left 8,9,10, 8,10,11, // Right 12,13,14, 12,14,15, // Top 16,17,18, 16,18,19, // Bottom 20,21,22, 20,22,23, }; float texCoords[] = { // Front face textured only, for simplicity 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f}; And it is drawn like so // Counter-clockwise winding. gl.glFrontFace(GL10.GL_CCW); // Enable face culling. gl.glEnable(GL10.GL_CULL_FACE); // What faces to remove with the face culling. gl.glCullFace(GL10.GL_BACK); // Enabled the vertices buffer for writing and to be used during // rendering. gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); // Specifies the location and data format of an array of vertex // coordinates to use when rendering. gl.glVertexPointer(3, GL10.GL_FLOAT, 0, verticesBuffer); if (normalsBuffer != null) { // Enabled the normal buffer for writing and to be used during rendering. gl.glEnableClientState(GL10.GL_NORMAL_ARRAY); // Specifies the location and data format of an array of normals to use when rendering. gl.glNormalPointer(GL10.GL_FLOAT, 0, normalsBuffer); } // Set flat color gl.glColor4f(rgba[0], rgba[1], rgba[2], rgba[3]); // Smooth color if ( colorBuffer != null ) { // Enable the color array buffer to be used during rendering. gl.glEnableClientState(GL10.GL_COLOR_ARRAY); // Point out the where the color buffer is. gl.glColorPointer(4, GL10.GL_FLOAT, 0, colorBuffer); } // Use textures? if ( textureBuffer != null) { gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glEnable(GL10.GL_TEXTURE_2D); gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer); } // Translation and rotation before drawing gl.glTranslatef(x, y, z); gl.glRotatef(rx, 1, 0, 0); gl.glRotatef(ry, 0, 1, 0); gl.glRotatef(rz, 0, 0, 1); gl.glDrawElements(GL10.GL_TRIANGLES, numOfIndices, GL10.GL_UNSIGNED_SHORT, indicesBuffer); // Disable the vertices buffer. gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); gl.glDisableClientState(GL10.GL_NORMAL_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); // Disable face culling. gl.glDisable(GL10.GL_CULL_FACE); However my front face looks like this I also add, I haven't got any normals set, are textures affected by normals? float texCoords[] = { // Front 1.0f, 1.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f} It seems as if the texture is being flipped, so the coordinates don't match up properly?

  Read the article

• Issues writing to serial port on MAC OSX using unistd.h in c

  - by Schuyler

  I am trying to write to a bluetooth device on MAC OSX using the unistd.h Linux functions in c. I am connecting fine and writing the first few bytes with success. When I try to write other commands to it (there are bytes added to the write buffer every 15ms), I don't see any results even though the write() function returns 1 (write success). If you start a write and it doesn't finish by the time you try to start another write (since it is non-blocking), could that possibly screw up the initial write? (If so, is there any way to check if a write has completed?) That is the only thing I can think of since the writes are occurring fairly frequently and the first two are successfully sent. qwbyte() simply adds a byte to the output array and increments its length The open port function: BAMid = -1; struct termios options; struct termios originalTTYAttrs; // Open the serial port read/write, nonblocking, with no controlling terminal, and don't wait for a connection. BAMid = open(strPath, O_RDWR | O_NOCTTY | O_NONBLOCK); if (BAMid == -1) { printf("Error opening serial port %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Issue TIOCEXCL ioctl to prevent additional opens except by root-owned processes. if (ioctl(BAMid, TIOCEXCL) == -1) { printf("Error setting TIOCEXCL on %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Get the current options and save them so we can restore the default settings later. if (tcgetattr(BAMid, &originalTTYAttrs) == -1) { printf("Error getting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // The serial port attributes such as timeouts and baud rate are set by modifying the termios // structure and then calling tcsetattr() to cause the changes to take effect. Note that the // changes will not become effective without the tcsetattr() call. options = originalTTYAttrs; // Set raw input (non-canonical) mode, with reads blocking until either a single character // has been received or a one second timeout expires. [should be moot since we are leaving it as nonblocking] cfmakeraw(&options); options.c_cc[VMIN] = 1; options.c_cc[VTIME] = 10; cfsetspeed(&options, B57600); // Set 57600 baud options.c_cflag |= CS8; // Use 8 bit words // Cause the new options to take effect immediately. if (tcsetattr(BAMid, TCSANOW, &options) == -1) { printf("Error setting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } //flush old transmissions if (tcflush(BAMid,TCIOFLUSH) == -1) { printf("Error flushing BAM serial port - %s(%d).\n", strerror(errno), errno); } oBufLength = 0; // Ask it to start if (! qwbyte(CmdStart) ) { goto error; } if (! qwbyte(CmdFull) ) { goto error; } //this transmit works txbytes(); printf("success opening port!"); return -1; // Failure path error: if (BAMid != -1) { close(BAMid); } printf("returning an error--%d",errno); return errno; } The write function (txbytes): int i, bufSize, numBytes; if(oBufLength != 0) { //if the output array isn't empty //duplicating the output array and its size so it can //be overwritten while this write is occuring printf("about to transmit: "); for(i = 0; i < oBufLength; i++) { printf(" %u",oBuf[i]); tempBuf[i] = oBuf[i]; } printf("\n"); bufSize = oBufLength; oBufLength = 0; numBytes = write(BAMid, &tempBuf, bufSize); printf("bytes written = %d\n",numBytes); if (numBytes == -1) { printf("Error writing to port - %s(%d).\n", strerror(errno), errno); } return (numBytes 0); } else { return 0; }

  Read the article

• Why does File::Slurp return a scalar when it should return a list?

  - by BrianH

  I am new to the File::Slurp module, and on my first test with it, it was not giving the results I was expecting. It took me a while to figure it out, so now I am interested in why I was seeing this certain behavior. My call to File::Slurp looked like this: my @array = read_file( $file ) || die "Cannot read $file\n"; I included the "die" part because I am used to doing that when opening files. My @array would always end up with the entire contents of the file in the first element of the array. Finally I took out the "|| die" section, and it started working as I expected. Here is an example to illustrate: perl -de0 Loading DB routines from perl5db.pl version 1.22 Editor support available. Enter h or `h h' for help, or `man perldebug' for more help. main::(-e:1): 0 DB<1> use File::Slurp DB<2> $file = '/usr/java6_64/copyright' DB<3> x @array1 = read_file( $file ) 0 'Licensed material - Property of IBM.' 1 'IBM(R) SDK, Java(TM) Technology Edition, Version 6' 2 'IBM(R) Runtime Environment, Java(TM) Technology Edition, Version 6' 3 '' 4 'Copyright Sun Microsystems Inc, 1992, 2008. All rights reserved.' 5 'Copyright IBM Corporation, 1998, 2009. All rights reserved.' 6 '' 7 'The Apache Software License, Version 1.1 and Version 2.0' 8 'Copyright 1999-2007 The Apache Software Foundation. All rights reserved.' 9 '' 10 'Other copyright acknowledgements can be found in the Notices file.' 11 '' 12 'The Java technology is owned and exclusively licensed by Sun Microsystems Inc.' 13 'Java and all Java-based trademarks and logos are trademarks or registered' 14 'trademarks of Sun Microsystems Inc. in the United States and other countries.' 15 '' 16 'US Govt Users Restricted Rights - Use duplication or disclosure' 17 'restricted by GSA ADP Schedule Contract with IBM Corp.' DB<4> x @array2 = read_file( $file ) || die "Cannot read $file\n"; 0 'Licensed material - Property of IBM. IBM(R) SDK, Java(TM) Technology Edition, Version 6 IBM(R) Runtime Environment, Java(TM) Technology Edition, Version 6 Copyright Sun Microsystems Inc, 1992, 2008. All rights reserved. Copyright IBM Corporation, 1998, 2009. All rights reserved. The Apache Software License, Version 1.1 and Version 2.0 Copyright 1999-2007 The Apache Software Foundation. All rights reserved. Other copyright acknowledgements can be found in the Notices file. The Java technology is owned and exclusively licensed by Sun Microsystems Inc. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems Inc. in the United States and other countries. US Govt Users Restricted Rights - Use duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp. ' Why does the || die make a difference? I have a feeling this might be more of a Perl precedence question instead of a File::Slurp question. I looked in the File::Slurp module and it looks like it is set to croak if there is a problem, so I guess the proper way to do it is to allow File::Slurp to croak for you. Now I'm just curious why I was seeing these differences.

  Read the article

• Is this way the best solution to read and save images from Rss Feeds?

  - by Keyne

  Hi, I've build a "RSS Feed Reader" module to my application, and for every post with images in the content, I get the first that matches a specific size and then I save for future use as reference to the posts. When processing, everything works properly except when more then 10 images are saved at the same time (This value is variable). I got an 404 error after a while saving the images. Some images are saved, but not all of them. If I run the app in my local server, everything work as expected (using set_timeout(0) to avoid timeout errors). Currently my application is hosted at dreamhost and I'm using Zend Framework. I'm not sure if the problem is specif for Zend Framework applications, so I didn't put any tags about. I've had this problem another time with other projects hosted at dreamhost. They seems to limitate memory for operations like that. My question is: There is a better way to save images then this (maybe in background? a limited amount per operation?): require_once(APPLICATION_PATH . '/../library/simplehtmldom/simple_html_dom.php'); $TableFeeds = new Model_DbTable_Feeds(); $Feeds = $TableFeeds->fetchAll(); foreach($Feeds as $Feed) { $entries = Zend_Feed_Reader::import($Feed->link); $lastEntry = $this->getLastEntry($Feed->id); if($lastEntry) { $lastDate = new Zend_Date($lastEntry->created_at, Zend_Date::ISO_8601); } foreach ($entries as $entry) { if($lastDate) { if(strtotime($lastDate->get('y-M-d H:m:s')) >= strtotime($entry->getDateCreated()->get('y-M-d H:m:s'))) { break; } } $Category = new Model_DbTable_Categorias(); $availableCategories = $Category->getList('slug'); $categoria_id = false; foreach ($categories as $cat) { if(!empty($cat) && !$categoria_id) { $slug = Zf_Convert::slugfy($cat); if($availableCategories[$Feed->categoria_id] == $slug) { $categoria_id = $Feed->categoria_id; break; } if(in_array($slug,$availableCategories)) { $categoria_id = array_search($slug,$availableCategories); break; } } } if(!$categoria_id) { $categoria_id = $Feed->categoria_id; } // Cadastra a entrada $data = array( 'categoria_id' => $categoria_id, 'feed_id' => $Feed->id, 'titulo' => $entry->getTitle(), 'slug' => Zf_Convert::slugfy($entry->getTitle()), 'created_at' => $entry->getDateCreated()->get(Zend_Date::ISO_8601), 'link' => $entry->getLink(), 'html' => $entry->getContent(), 'tags' => $tags ); $entry_id = $this->insert($data); if($categoria_id == 2) { set_time_limit(0); $post_dom = str_get_dom($entry->getContent()); $img_tags = $post_dom->find('img'); $images = array(); foreach($img_tags as $image) { $images[] = $image->src; } if(count($images)) { $i = 0; $saved = false; while($images[$i] && !$saved) { $src = $images[$i]; $imagem = Zf_Image::create($src); $size = $imagem->getCurrentDimensions(); if($size['width'] >= 150 && $size['height'] >= 200) { $imagem->adaptiveResize(200,200); $imagem->save(PUBLIC_PATH . '/img/feeds/manchetes/' . $entry_id . '.jpg'); $saved = true; $this->update(array('imagemChamada' => 1),'id =' . $entry_id); } $i++; } } } } } }

  Read the article

• Help needed with drawRect:

  - by Andrew Coad

  Hi, I'm having a fundamental issue with use of drawRect: Any advice would be greatly appreciated. The application needs to draw a variety of .png images at different times, sometimes with animation, sometimes without. A design goal that I was hoping to adhere to is to have the code inside drawRect: very simple and "dumb" - i.e. just do drawing and no other application logic. To draw the image I am using the drawAtPoint: method of UIImage. Since this method does not take a CGContext as a parameter, it can only be called within the drawRect: method. So I have: - (void)drawRect:(CGRect)rect { [firstImage drawAtPoint:CGPointMake(firstOffsetX, firstOffsetY)]; } All fine and dandy for one image. To draw multiple images (over time) the approach I have taken is to maintain an array of dictionaries with each dictionary containing an image, the point location to draw at and a flag to enable/suppress drawing for that image. I add dictionaries to the array over time and trigger drawing via the setNeedsDisplay: method of UIView. Use of an array of dictionaries allows me to completely reconstruct the entire display at any time. drawRect: now becomes: - (void)drawRect:(CGRect)rect { for (NSMutableDictionary *imageDict in [self imageDisplayList]) { if ([[imageDict objectForKey:@"needsDisplay"] boolValue]) { [[imageDict objectForKey:@"image"] drawAtPoint:[[imageDict objectForKey:@"location"] CGPointValue]]; [imageDict setValue:[NSNumber numberWithBool:NO] forKey:@"needsDisplay"]; } } } Still OK. The code is simple and compact. Animating this is where I run into problems. The first problem is where do I put the animation code? Do I put it in UIView or UIViewController? If in UIView, do I put it in drawRect: or elsewhere? Because the actual animation depends on the overall state of the application, I would need nested switch statements which, if put in drawRect:, would look something like this: - (void)drawRect:(CGRect)rect { for (NSMutableDictionary *imageDict in [self imageDisplayList]) { if ([[imageDict objectForKey:@"needsDisplay"] boolValue]) { switch ([self currentState]) { case STATE_1: switch ([[imageDict objectForKey:@"animationID"] intValue]) { case ANIMATE_FADE_IN: [self setAlpha:0.0]; [UIView beginAnimations:[[imageDict objectForKey:@"animationID"] intValue] context:nil]; [UIView setAnimationDelegate:self]; [UIView setAnimationCurve:UIViewAnimationCurveEaseIn]; [UIView setAnimationDuration:2]; [self setAlpha:1.0]; break; case ANIMATE_FADE_OUT: [self setAlpha:1.0]; [UIView beginAnimations:[[imageDict objectForKey:@"animationID"] intValue] context:nil]; [UIView setAnimationDelegate:self]; [UIView setAnimationCurve:UIViewAnimationCurveEaseOut]; [UIView setAnimationDuration:2]; [self setAlpha:0.0]; break; case ANIMATE_OTHER: // similar code here break; default: break; } break; case STATE_2: // similar code here break; default: break; } [[imageDict objectForKey:@"image"] drawAtPoint:[[imageDict objectForKey:@"location"] CGPointValue]]; [imageDict setValue:[NSNumber numberWithBool:NO] forKey:@"needsDisplay"]; } } [UIView commitAnimations]; } In addition, to make multiple sequential animations work correctly, there would need to be an outer controlling mechanism involving the animation delegate animationDidStop: callback that would set the needsDisplay entries in the dictionaries to allow/suppress drawing (and animation). The point that we are at now is that it all starts to look very ugly. More specifically: drawRect: starts to bloat quickly and contain code that is not "just drawing" code the UIView needs implicit awareness of the application state the overall process of drawing is now spread across three methods at a minimum And on to the point of this post: how can I do this better? What would the experts out there recommend in terms of overall structure? How can I keep application state information out of the view? Am I looking at this problem from the wrong direction. Is there some completely different approach that I should consider?

  Read the article

• How to represent a Board Panel in Java for a game ? [+code]

  - by FILIaS

  I wanna fix a 2D board for a game. I've already fixed other panels for the Gui and everything goes well. But the panel for the board cant be printed on the window. I'm a bit confused about it as i think i've followed the same ideas as for the others panels i need. Here's what i've done: EDIT:*EDIT* what i'm trying to do is fix a board panel for the game according to the dimensions of the it,hold every square in an array in order to use it after wherever it;s needed. I draw each little square of it with the method draw and put it back to the panel. So, each square on the board is a panel. This is the idea. But as u can see. There are troubles/errors on it. EDIT: code updated. just found a part of the problem. i thought first that i had set background to squared, but i didnt. with this one it appears on the panel a wide black "column". Unfortunately,still none squares. :( One More EDIT: Also,i realized that draw method is never called. when i put the draw method in the following method i can see the squares but they remain small. I redefine them with setSize but still no change. /** *Method used to construct the square in the area of the *gui's grid. In this stage a GUISquare array is being constructed, * used in the whole game as *a mean of changing a square graphical state. *@param squares is the squares array from whom the gui grid will be *constructed. *@see getSquare about the correspondance beetween a squareModel and * a GUISquare. */ private void initBoardPanel(SquareModel[][] squares){ BoardPanel.setLayout(new GridLayout(height ,width )); //set layout SquareRenderer[][] Squares; JPanel[][] grid; Squares=new GUISquare[height][width()]; grid=new JPanel[height()][width()]; for (int i=0; i<height(); i++){ for (int j=0; j<width() ; j++){ grid[i][j] = new JPanel( ); SquareRenderer kout=new SquareRenderer(i,j); koutaki.setSquare(myGame.getSquares()[i][j]); if (myGame.getSquares()[i][j] instanceof SimpleSquareModel){ kout.draw(i,j,"");} else { kout.draw(i,j); } kout.setVisible(true); kout.setBackground(Color.BLACK); kout.setSize(50,50); Squares[i][j]= kout; grid[i][j].setSize(50,50); grid[i][j].setVisible(true); grid[i][j].setBackground(Color.BLACK); BoardPanel.add(kout); BoardPanel.setVisible(true); BoardPanel.setBackground(Color.WHITE); } } this.add(BoardPanel,BorderLayout.WEST); // this.pack(); //sets appropriate size for frame this.setVisible(true); //makes frame visible } IMPLEMENTED BY SQUARERENDERER: /** * Transformer for Snake/Ladder * <br>This method is used to display a square on the screen. */ public void draw(int i,int j) { JPanel panel = new JPanel(); panel.setLayout(new BorderLayout()); JLabel label1 = new JLabel("Move To"+myGame.getSquares()[i][j].getGoTo()); JLabel label2 = new JLabel(""+myGame.getSquares()[i][j].getSquare()); JSeparator CellSeparator = new JSeparator(orientation); panel.add(CellSeparator); panel.setForeground(Color.ORANGE); panel.add(label2, BorderLayout.NORTH); panel.add(label1, BorderLayout.CENTER); }

  Read the article

• PHP hooks information and help needed

  - by sea_1987

  Background I am realtively new to hooks, and I have been asked to use a hook to populate a view with some data, currently the view gathers it data from a function that is in the model, and becuase the whole object is being passed to the view I can access the function. The function looks like this, public function numCVInSector($k) { $this->load->model('SYSector'); $sectorModel = new SYSector(); $cvs = $sectorModel->fetchRelatedCV($k); $cvs = $cvs[0]['count']; if($cvs == "0") { return false; } else { return $cvs; } } it call's a query in the model that looks like this, public function fetchRelatedCV($k) { $sql = "SELECT sector_id, COUNT(sector_id) as count FROM sy_user_sectors WHERE sector_id = $k"; //print_r($sql); $query = $this->db->query($sql); return $query->result_array(); } $k is the id of element that is in the view. The Problem I have been asked to use a hook that is in the parent of the model the hook is called post populate, now I have very little idea of what a hook is or how to use one to implement my function. Could some one give me some advice, the code where the hook is original made looks like this, public function populate($where = array()) { $results = array( "success" => false, "is_error" => false, "error_code" => "", "error_message" => "" ); if(empty($where) && empty($this->aliases['id'])){ $results['is_error'] = true; $results['error_message'] = 'No criteria.'; return $results; } // [hook] $this->prePopulate(); $where = count($where) > 0 ? $where : array('id' => $this->aliases['id']); $query = $this->db->get_where($this->tableName, $where, 1); if($query->num_rows() < 1){ $results['error_message'] = 'Empty results.'; return $results; } foreach($query->result_array() as $row){ foreach($this->aliases as $key => $val){ $this->aliases[$key] = $row[$key]; } } // [hook] $this->postPopulate(); // Presume success $results['success'] = true; return $results; } I have been asked to use the postPopulate hook. public function postPopulate() { $args = $this->getHookArgs('post_populate'); if(!is_array($args)){ // $this->fb->log($args, 'bad args'); return false; } // code here... // Convert dates to front end formats. foreach($this->frontEndDateFields as $fieldName => $dateFormat){ $dateRes = mlib_du_getFormattedMySQLDate($this->aliases[$fieldName], $dateFormat); if($dateRes != false){ $this->aliases[$fieldName] = $dateRes; } } return true; }

  Read the article

• One url to image, few results

  - by Misiur

  Hi! I'm trying to show programmers that some captchas are too weak, and i'm breaking them. Now i've got something like this: Function: <?php function cbreak($image) { $info = getimagesize($image); $width = $info[0]; $height = $info[1]; $img = imagecreatefromgif($image); $map = array(); for($y=0; $y<$height; $y++) { for($x=0; $x<$width; $x++) { $color = imagecolorsforindex($img, imagecolorat($img, $x, $y)); $map[$x][$y] = ($color['red'] + $color['blue'] + $color['green'] > 750) ? TRUE : FALSE; } } echo '<pre>'; for($y=0; $y<$height; $y++) { for($x=0; $x<$width; $x++) { echo ($map[$x][$y] == TRUE) ? 'X' : '-'; } echo '<br>'; } echo '</pre>'; $sum = ''; for($x=0; $x<$width; $x++) { $count = 0; for($y=0; $y<$height; $y++) { if($map[$x][$y] == TRUE) $count++; } $sum .= ($count == 0) ? 'X' : $count; } $sum = preg_replace('#X+#', 'X', $sum); $sum = trim($sum, 'X'); $letters = explode('X', $sum); $patterns = array( /* Still not here */ ); $token = ''; for($i=0; $i<count($letters); $i++) { $token .= $patterns[$letters[$i]]; } echo $token; } ?> Action: <?php $cl = curl_init("http://www.takeagift.pl/rejestracja"); curl_setopt($cl, CURLOPT_RETURNTRANSFER, 1); $r = curl_exec($cl); $pattern = "/src=[\"'].*[\"']?/i"; preg_match_all($pattern, $r, $images); $c = array(); for($i=0; $i<sizeof($images[0]); $i++) { if(strstr($images[0][$i], 'captcha') !== false) { $c = $images[0][$i]; } } $s1 = substr($c, 0, -8); echo $s1."<br />"; $s = substr($s1, 5, -1); echo $s."<br />"; curl_close($cl); ?> <img src="http://www.takeagift.pl/includes/modules/captcha.php?1270900968" /><br /> <img src="http://www.takeagift.pl/includes/modules/captcha.php?1270900968" /><br /> <img src="http://www.takeagift.pl/includes/modules/captcha.php?1270900968" /><br /> <img src="http://www.takeagift.pl/includes/modules/captcha.php?1270900968" /><br /> <img src="http://www.takeagift.pl/includes/modules/captcha.php?1270900968" /><br /> <?php include('cb.php'); cbreak("http://www.takeagift.pl/includes/modules/captcha.php?1270900968"); ?> Don't look at preg_match i still haven't learned regexp. So as You can see links are same: (captcha.php?1270900968), but the result - not. Help me, please (i'm not doing it to spam this portal)

  Read the article

• Populating a GridView with ImageViews dynamically/programmatically using a ImageAdapter

  - by Julian Vogels

  Hi folks, this is my first question at stackoverflow, but it's a little tricky already... I try to develop an Android App which allows the user to fetch data from flickr and show it in a gridview (with some nice 3D-Animation). After some adventures i got it almost running, but now I'm stuck. Here's the problem: I got a UI Thread "LoadPhotosTask" which gets the pictures from flickr, just like the open source application photostream. In the method onProgressUpdate(LoadedPhoto... value) of that subclass I call addPhoto(). Until now everythings fine - I got some nice Bitmap and Flickr.photo data with all the information I need. @Override public void onProgressUpdate(LoadedPhoto... value) { addPhoto(value); } On the other hand I have got a GridView. Now I want to fill it with the Photos. It has got an adapter called ImageAdapter (which extends BaseAdapter, see this tutorial). If I use an array inside the ImageAdapter class I can populate the GridView with some sample images. But if I want to populate it at runtime, I don't know what to do. How do I have to set up the getView method in the ImageAdapter? I was trying to fill the array inside the ImageAdapter class with my values in addPhoto, but it doesn't display anything. So first of all I was setting up the array with the amount of Photos i wanted to display in the grid like that (code is inside the ImageAdapter class): // class variable private ImageView[] mThumbIds; [...] public void setupArray(int count) { this.mThumbIds = new ImageView[count]; } Then I call this method with the lenght of my photolist: final Flickr.PhotoList list = params[0]; final int count = list.getCount(); int helper = 0; imagead.setupArray(count); Afterwards I call the getView method manually inside the addPhoto method: private void addPhoto(LoadedPhoto... value) { ImageView image = (ImageView) mInflater.inflate( R.layout.grid_item_photo, null); image.setImageBitmap(value[0].mBitmap); image.setTag(value[0].mPhoto); imagead.setmThumbIds(image, value[0].mPosition); imagead.getView(value[0].mPosition, null, mpicturesGrid); } That is the getView method inside ImageAdapter: public View getView(int position, View convertView, ViewGroup parent) { if (convertView == null) { // if it's not recycled, initialize some // attributes imageView = new ImageView(mContext); imageView.setLayoutParams(new GridView.LayoutParams(EDGE_LENGTH, EDGE_LENGTH)); imageView.setScaleType(ImageView.ScaleType.CENTER_CROP); imageView.setPadding(0, 0, 0, 0); imageView.setVisibility(View.VISIBLE); } else { imageView = (ImageView) convertView; } imageView.setImageDrawable(mThumbIds[position].getDrawable()); imageView.setTag(mThumbIds[position].getTag()); return imageView; } Ok, finally I apologize for my poor english and I hope you can give me some help with the information I provided. Greetings, Julian

  Read the article

• Problems uploading different file types in codeigniter

  - by Drew

  Below is my script that i'm using to upload different files. All the solutions I've found deal only with multiple image uploads. I am totally stumped for a solution on this. Can someone tell me what it is i'm supposed to be doing to upload different files in the same form? Thanks function do_upload() { $config['upload_path'] = './uploads/nav'; $config['allowed_types'] = 'gif|jpg|png'; $config['max_size'] = '2000'; $this->load->library('upload', $config); if ( ! $this->upload->do_upload('userfile')) { $error = array('error' => $this->upload->display_errors()); return $error; } else { $soundfig['upload_path'] = './uploads/nav'; $soundfig['allowed_types'] = 'mp3|wav'; $this->load->library('upload', $soundfig); if ( ! $this->upload->do_upload('soundfile')) { $error = array('error' => $this->upload->display_errors()); return $error; } else { $data = $this->upload->data('userfile'); $sound = $this->upload->data('soundfile'); $full_path = 'uploads/nav/' . $data['file_name']; $sound_path = 'uploads/nav/' . $sound['file_name']; if($this->input->post('active') == '1'){ $active = '1'; }else{ $active = '0'; } $spam = array( 'image_url' => $full_path, 'sound' => $sound_path, 'active' => $active, 'url' => $this->input->post('url') ); $id = $this->input->post('id'); $this->db->where('id', $id); $this->db->update('NavItemData', $spam); return true; } } } Here is my form: <?php echo form_open_multipart('upload/do_upload');?> <?php if(isset($buttons)) : foreach($buttons as $row) : ?> <h2><?php echo $row->name; ?></h2> <input type="file" name="userfile" size="20" /><br /> <input type="file" name="soundfile" size="20" /> <input type="hidden" name="oldfile" value="<?php echo $row->image_url; ?>" /> <input type="hidden" name="id" value="<?php echo $row->id; ?>" /> <br /><br /> <label>Url: </label><input type="text" name="url" value="<?php echo $row->url; ?>" /><br /> <input type="checkbox" name="active" value="1" <?php if($row->active == '1') { echo 'checked'; } ?> /><br /><br /> <input type="submit" value="submit" /> </form> <?php endforeach; ?> <?php endif; ?>

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >