Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 328/372 | < Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >

  • KVM recommendations

    - by alex
    I recently tried out a cheaper KVM solution, a dual monitor one with a USB hub and audio/mic support. It seemed the perfect KVM. However, these are my experiences. When using my keyboard via the PS/2 connection, none of my multimedia keys work (useful, because it has a volume control and my speakers do not, only on a wireless remote control.) I plugged the keyboard in via the USB port - and it seemed to work. However, I believe to switch the hub from PC to Mac, you need to use a keyboard combo, which is only supported when the keyboard is plugged in via PS/2 Sometimes the middle mouse button doesn't work when connected via PS/2. The multi monitor is VGA - I just found out by the looks of things my Mac Mini outputs DVI Digital only (though this is my fault!). Mac works with 2 screens, but switching and switching back can cause it not to display on the 2nd screen unless I go detect displays again. My question is - is there a KVM out there that supports these features? USB keyboard and mouse inputs will full multimedia keys support Dual monitor DVI connections Hotkey to change PCs and physical button USB hub Emulate screens attached when switching to a different computer Works with PC and Mac Audio / Microphone support Does one exist, that won't cost the world? So far the only one that seems to support all this (that I can tell) is this one. UPDATE I ended up buying the Aten CS1642. It's expensive, but it seems to work great!

    Read the article

  • scp error: "Permission denied (publickey). lost connection"

    - by Winston C. Yang
    I tried to scp an svn dump to savannah, but I got the following error at the end. Permission denied (publickey). lost connection The scp command and verbose output are below. Any ideas? [wcyang@be2-wireless-pittnet-60-37 ~]$ scp -v diffcolor-dump.bz2 [email protected]:/srv/download/diffcolor/ Executing: program /usr/bin/ssh host dl.sv.gnu.org, user wcyang, command scp -v -t /srv/download/diffcolor/ OpenSSH_5.2p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to dl.sv.gnu.org [140.186.70.73] port 22. debug1: Connection established. debug1: identity file /Users/wcyang/.ssh/identity type -1 debug1: identity file /Users/wcyang/.ssh/id_rsa type 1 debug1: identity file /Users/wcyang/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'dl.sv.gnu.org' is known and matches the RSA host key. debug1: Found key in /Users/wcyang/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/wcyang/.ssh/identity debug1: Offering public key: /Users/wcyang/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/wcyang/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). lost connection

    Read the article

  • Laptop Asus P50IJ with Intel 4500M GMA output going to a Dell 1907FP external monitor will not allow

    - by ProfessionalAmateur
    Hello - I just purchased an Asus P50IJ-X2 laptop which has a Intel GMA 4500M video card running Windows7. At work I output this laptop to a Dell 1907FP LCD which has a maximum resolution of 1280x1024. Not matter what I do the Windows will not allow the laptop to set a resolution higher than 1024x768 to this LCD monitor. Ive even gone to the extent of downloading PowerStrip (I'd post a link but Im new and can only enter 1 url, if you google for powerstrip its the first option) to create a custom driver for my monitor thinking Windows was having a hard time seeing the available resolutions it would accept. However, powerstrip read the registery and properly sees the monitor and what its capable of so Im now at a complete loss as to why Windows7 will not allow me to set/use a 1280x1024 resolution for this external monitor (as my last laptop did running Vista). The Intel documentation (http://software.intel.com/en-us/articles/quick-reference-guide-to-intel-integrated-graphics/) indicates that the GMA 4500M should be able to run up to a 2560x1600 max res. The Dell 1907FP specification states it can run up to a 1280x1024 res. But no matter what the computer will not allow me to set higher than a 1024x768. I'm completely baffled but I would really like to be able to output this laptop to a reasonable resolution, 1024x768 makes me feel like I'm using my mom's computer. Any help would be greatly appreciated! Here are some attached images (I apologize for the links, being new I cannot post images) that should help explain this better: Image 1 - This image is from powerstrip which shows the monitors max accepted resolution and at the top right the max res my PC currently allows. (http://imgur.com/agrno.png) Image 2 - This shows my Windows7 resolution picker. (http://imgur.com/3nv6q.png) Image 3 - The 'List all modes' option taken from the Screen Resolution Advanced Settings List All Modes. (http://imgur.com/AMREh.png) Image 4 - Monitor information from registry read by powerstrip, this shows the laptop is able to read the necessary info from the LCD monitor. (http://imgur.com/hUX4D.png)

    Read the article

  • Ubuntu/Nvidia lists DVI dual cable as single

    - by Joseph Mastey
    I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

    Read the article

  • What is Apache Synapse?

    - by Aren B
    My website keeps getting hit by odd requests with the following user-agent string: Mozilla/4.0 (compatible; Synapse) Using our friendly tool Google I was able to determine this is the hallmark calling-card of our friendly neighborhood Apache Synapse. A 'Lightweight ESB (Enterprise Service Bus)'. Now, based on this information I was able to gather, I still have no clue what this tool is used for. All I can tell is that is has something to do with Web-Services, and supports a variety of protocols. The Info page only leads me to conclude it has something to do with proxies, and web-services. The problem I've run into is that while normally I wouldn't care, we're getting hit quite a bit by Russian IPs (not that russian's are bad, but our site is pretty regionally specific), and when they do they're shoving wierd (not xss/malicious at least not yet) values into our query string parameters. Things like &PageNum=-1 or &Brand=25/5/2010 9:04:52 PM. Before I go ahead and block these ips/useragent from our site, I'd like some help understanding just what is going on. Any help would be greatly appreciated :)

    Read the article

  • Asus P5Q doesn't post at all

    - by Sebi
    I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

    Read the article

  • Windows Audio Issue

    - by Nikki
    This one is driving me nuts. Hoping someone can shed some light. I'm running windows 7 using onboard audio. It's been fine for over 2 years but lately there's a problem every time I play audio. I hear a small soft burst of static and the volume turns itself down from 50% to 23%. Once at 23%, it plays fine. No related events logged in viewer. No reported problems with the device. Different headphones, same problem. I played around with audio settings for hours but the problem persists. EDIT: ok more info: Motherboard: ECS G31T-M LGA775 System info displays this: Name High Definition Audio Device Manufacturer Microsoft Status OK PNP Device ID HDAUDIO\FUNC_01&VEN_1106&DEV_E721&SUBSYS_10192683&REV_1001\4&3D4E739&0&0001 Driver c:\windows\system32\drivers\hdaudio.sys (6.1.7600.16385, 297.00 KB (304,128 bytes), 14/07/2009 9:51 AM) I'll keep adding info as I find it. The question I want resolved is; Is it faulty hardware? If so, I can buy a sound card. I can't imagine software is responsible since I haven't installed anything new for weeks. Virus scans are clear as well. The static burst is irritating to say the least. Tried 2 different headphones and separate speakers. Same problem. I know it's not an easy problem but I was hoping someone had encountered the same thing.

    Read the article

  • Is it possible to play multiple audio streams from one "jukebox" to multiple Airport Express devices?

    - by Alex Reynolds
    I have set up a Mac mini as a jukebox that streams audio to an Airport Express in another room in the house, using the AirPlay/AirTunes feature in iTunes. I control this with the iOS Remote app, and this works great. At the present time, it looks like the Mac mini's copy of iTunes gets taken over by the Remote app, while streaming. If I set up a second Airport Express in room B, is there a way to set it up (as well as the jukebox) so that it can receive and play its own unique music stream ("stream B"), separate from what's going on at the Mac mini, or in room A, which is playing stream A? To accomplish this, I would be happy to buy a copy of Rogue Amoeba's AirFoil if it will allow sending multiple, separate audio streams from one computer to the multiple wireless bridges, while using the Remote app (or a Rogue Amoeba equivalent for iOS). However, it is unclear to me from their site documentation, whether that is possible or not. I'd prefer to give the points to an answer that solves this problem. If you don't know if it can be done, or do not think it can be done, please allow others to answer. I appreciate your help. Thanks for your advice.

    Read the article

  • IPMI not fucntioning with Network Bonding

    - by muhammed sameer
    Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by BlueBill
    Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

    Read the article

  • RAID1 Broken Mirroring

    - by Sanoj
    I'm having a little server with Windows Small Business Server 2003. I'm using RAID1, via a HighPoint Rocket RAID 1640 RAID-card, using two harddrives. This week the server alarmed, and durig reboot I got the error-message Broken Mirroring (User Manual page 30). I had a few alternatives (see the manual), first I tried Continue, but the server restarted during boot. Next time I took Power Off, and replaced the oldest harddrive with a new one, and when I booted, I selected Rebuild. Then I selected the new harddrive to be the new one. The rebuild-procedure started and a progress bar at 0% showed up, but after a few seconds I got the message Copy Failed!, then the server booted and Windows Server started. Now it works fine. But I guess that I'm just using one harddrive now, and it's not mirrored. I haven't touched the server since then (two days ago). What should I do now? I have no experience of this situation. Anyone that have some guidance?

    Read the article

  • Windows Server 2008R2 - can't change or remove the default gateway

    - by disserman
    We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

    Read the article

  • Recommended motherboard with hardware raid for Linux

    - by luison
    Hi. We want to setup an internal office server for testing jobs (LAMP), email and samba. Only about 5-10 users. We are also considering starting to virtualize, initially by a base Ubuntu Server with Xen or VMWare Open Source server. Our current system runs with a Linux Raid which has worked great but it's always been complicated to recover the boot sector when one the drives fail and therefore I would prefer using now a hardware raid instead, but ideally with some kind of software monitoring. For this reason and considering we don't want to spend a fortune a I would appreciate any comments on the following options. Motherboard with RAID with linux support... which could you recommend. Motherboard + Hardware Raid card... Adaptec does not seem to have great Linux suppport. 3Ware seems to have a tc soft controller which we've used on a hosting company, but hard to find here in Spain. HP Proliant type basic server, which? Dell Small Servers... any good for Linux? Thanks in advance for any feedback.

    Read the article

  • Dell 15Z. Trying to output image using Mini Displayport to a Yamasaki Q270. (2560 x 1440) rez monitor. Dual DVI-D to Mini Displayport

    - by michaelcku
    I have a Dell 15Z. GT525M Video card. Updated Driver via NVIDIA. Problem is I just purchased a Yamasaki Catleap Q270 monitor. It is a (2560x1440) monitor with only a Dual DVI-D out. 15Z only has HDMI and a Mini Display Port. I got a Active Dual DVI-D to Mini Display Port Active Adapter(Linked Below). http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802&p_id=6904&seq=1&format=2 The Setup works when i plug it into my Macbook air 13.3. However when I plug it into my 15Z it doesn't work. Tried everything I can thank of. Window control P. FN and F1. It just doesn't work. I believe the issue lies in the Mini Display Port but i can't be sure. No matter what i do, the Mini Display Port doesn't get recognized. Spent 3 hours on the phone with the XPS Tech team. They simply said it was not compatible.... Any help or suggestion would be greatly appreciated.

    Read the article

  • Is there a way to tell what the download speed is from a site/server

    - by Memor-X
    i'm looking into which ISP i should go with at the place i'm moving into, one ISP which i have been told good things about has data limits (which when breached will drop your speed to dial-up speed) but multiple memberships which, apart from the cheapest membership, have the same data limits (the cheapest has a 10GB data limit) in their fine print, they say that each different membership has different port speeds, one particular part jumps out at me These speeds are the NBN (National Broadband Network) port speed and not the actual Internet data speed which will vary based on numerous factors including destination you are reaching, your network equipment, network congestion etc. i plan to use the net to download DLC and patch updates for games (particular the insanely large update for the Wii U) and games from Steam (if i find any good one other than this one JRPG) and downloading development resources from free sites like Deposit Files and Mediafire since one membership with a 1000GB data limit is $145 with the port speed being 12Mbps/1Mbps (cheapest) while another with the same limit is $190 with the port speed of 100Mbps/40Mbps (expensive) i am wondering how i can tell what the speed coming from site is since i don't want to be wasting money on speed that makes no difference (unlike memory which i rather have to spare) NOTE: the speeds are for a fiber optic network which where my new place is can only connect via fixed wireless which i may not be able to get with this ISP but if i can get this network then good NOTE 2: most of the resources i get from Deposit Files are always about 200 MB or less, if a resource pack is greater then it's split into multiple archives (like .7z.part) while Mediafire i have to see one bigger than 150MB NOTE 3: one update patch for a PS3 game is close to 4 GB (Disgaea 4) which i need to get access to the DLC and on the weekend i downloaded 5 GB for the Final Fantasy XIV Open Beta for the PS3 which took almost 5 hours

    Read the article

  • Virtual Machines Renaming/Backing up/Sharing

    - by evan
    I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

    Read the article

  • Hardware for a home server running Windows Server 2008 R2 Hyper-V or Microsoft Hyper-V Server 2008 R2

    - by David Hayes
    Hi, I'm planning to build a server to do the following Act as a file server (videos, pictures music) Run Squeezebox server Run Zune Software to allow wireless syncing to Windows Phone 7 I'd also like to aim for Low power usage (i'd settle for less than the 90-100Watts I'm using atm Flexibility, I might want to add a web server or sharepoint or... Something I can learn/test on, work is mainly a Windows shop but I do have Linux experience too I'd like to take a look at App-V (application virtualization) too I'd like it to cost less than $1000 Quiet would be nice but not essential (it'll be in the basement) I'm thinking of getting a technet subscription to get access to Windows Server 2008 R2 at a reasonable price ($199) So my plan was this Get a bunch of 2TB Caviar green drives to RAID up (RAID 1 or 6 probably) Get a Quad core CPU (Intel i5/i7 probably) Install a Hypervisor Install w2k8 R2 Storage Server for a NAS Install Windows 7 Pro to run Zune/Squeeze box Install any other machines I want to play with Questions Can anyone see any issues with this or have any better ideas? Do you think I'd need an i7 over an i5? Is 4 cores enough/too much? Can anyone sugest a nice, reasonably priced case that will hold 6-8 drives and stay cool Should I wait for Sandy Bridge parts?

    Read the article

  • Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

    - by Paula
    I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

    Read the article

  • Can a wifi AP act as a client, and a server at the same time?

    - by nbolton
    I feel this is SF worthy (as opposed to SU) as I go into a bit of detail on gateways/routing. Here's my ideal setup (if possible) -- there is a wifi network (lets call it bob's) with which I want access to, but I have a few other computers on my network which I want to keep behind a firewall. So I was thinking of buying a wireless access point so that I could set it up to connect to bob's network from the AP, and then from my server, connect to the AP via ethernet. So that's the first bit. Second part is that I want to have my own private wifi network off the back of this; can I then tell the AP to serve a new network called foobar. When I say private network, I mean that my server is actually a Debian linux install with routing configured (and I also do some QoS stuff on, etc). So ideally, I'd like all the clients on the private network to be behind the server in terms of routing. However, if the private clients connect to the server via wifi, then aren't they exposed to the "public" network? That is, if someone is savvy enough to scan for my IP range. Also, to do routing I'd need to connect two ethernet cables between the server and the AP (because you can't do routing/QoS on virtual devices) -- which isn't a problem really; but I'm not sure whether the AP will allow me to separate the public and private LANs. Or, as well as the AP, am I better getting a wifi-to-ethernet adapter for the server? I could use a wifi usb, but this can be tricky to set up on headless linux; plus the signal strength is a bit lousy. If this question is a bit vague/spurious in places, please comment and I will explain in more detail.

    Read the article

  • Strange performance issue with Dell R7610 and LSI 2208 RAID controller

    - by GregC
    Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

    Read the article

  • Windows 7 BSOD with Service Exception Error and Randomly Reboots

    - by Jason Shultz
    I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

    Read the article

  • SAS vs Near-line SAS vs SATA

    - by David
    I'm unsure about the differences in these storage interfaces. My Dell servers all have SAS RAID controllers in them and they seem to be cross-compatible to an extent. The Ultra-320 SCSI RAID controllers in my old servers were simple enough: One type of interface (SCA) with special drives with special controllers, humming at 10-15K RPM. But these SAS/SATA drives seem like the drives I have in my desktop, only more expensive. Also my old SCSI controllers have their own battery backup and DDR buffer - neither of these things are present on the SAS controllers. What's up with that? "Enterprise" SATA drives are compatible with my SAS RAID controller, but I'd like to know what advantage SAS drives have over SATA drives as they seem to have similar specs (but one is a lot cheaper). Also, how do SSDs fit into this? I remember when RAID controllers required HDDs to spin at the same rate (as if the controller card supplanted the controller in the drive) - so how does that work out now? And what's the deal with Near-line SATA? I apologise about the rambling tone in this message, it's 5am and I haven't slept much.

    Read the article

  • How do I find out the Mac Address Firefox submits for Geolocation?

    - by Jim McKeeth
    I moved, but have the same router and cable box. Now when I visit Google Maps it still shows my old location. I went to the SkyhookWireless update page to update my Mac Address with my new location. The process is you put in your Mac address and it shows you the current location, and then you adjust that location and submit it. When I got the Mac Address from the status page on my router Skyhook reported that location as in Pakistan, which isn't even the correct continent (as my old or new address). I tried every other Mac address I could come up with: The cable router, the Wireless router's other Mac address, my PC's Mac address, etc. and none of them reported any location on the Skyhook page. So I am guessing that there is another Mac address, or some other bit of information that is used by Firefox when it reports to Google Maps my current location. Now that you have the back story, how do I find the Mac address or whatever information it is that Firefox (or other browsers) use to determine my Geolocation? Everything I have read online is rather vague. The next option I am considering is hooking a logging proxy onto Firefox and seeing what data it sends, but I'd rather find an easier method. Related: How do I update the geo location of my house?

    Read the article

  • How can I calculate power consumption of my PC in Watt?

    - by Jitendra vyas
    How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

    Read the article

  • Macbook Pro 2010 Ethernet Jumbo Frame(9k MTU) Support?

    - by Troggy
    Has anyone been able to use jumbo frame support on their 2010 Macbook Pros? This is kind of negative news here, but I am seeing many reports that this is not available anymore due to Apple's choice of network card in the new machines. I cannot set my MTU speed over 1500 on my new 2010 MBP i7, but my old early 2008 MBP (Core2) has the 9000 MTU setting for use. Everything I have is setup to use jumbo frames and I thought apple kept that feature in their "pro" lineup. It sounds like the Mac Pro still has it. Did they decide to use a chipset that doesn't support it? I am trying to pinpoint some solid chipset numbers and the feature support. Maybe they just need to update the drivers? Is there some more official information about this feature? This might seem minor, but this is really frustrating if apple removed this feature from their pro laptop line. From what I have read so far, it sounds like I am not alone in my frustrations with this. http://discussions.info.apple.com/message.jspa?messageID=12258067 http://discussions.apple.com/thread.jspa?messageID=12130158 Anyone have any experience or further knowledge about this issue ... beyond typing my question into google and giving the top 5 results as answers? :)

    Read the article

< Previous Page | 324 325 326 327 328 329 330 331 332 333 334 335  | Next Page >