Search Results

Search found 16809 results on 673 pages for 'nothing 2 lose'.

Page 329/673 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• How to modify partitions after install?

  - by ChocoDeveloper

  I wanted to have Ubuntu with full disk encryption on one big partition, and Windows on a small one. In 12.04, only the Server Edition installer has full disk encryption, so I used that and then installed ubuntu-desktop. When it asked for the size, I reduced it from ~999GB to ~750gb. Now after the install, on both gparted and disk utility I see /dev/sda2 taking ~931GB, and nothing unallocated, so I can't create a partition for windows. I got the size right, because when I right-click inside a folder, then hit 'properties', I see Free space: ~690GB (I don't know why it's not ~750GB, but at least it's not 900). The command df -h shows the same. So what can I do? Normally I would just resize a partition with gparted to create unallocated space, then create the partition. But here I have two problems: gparted does not seem to be showing the correct values, and also it says it does not support LUKS so I'm afraid it will mess things up. Any thoughts?

  Read the article

• Unable to do Port Forwarding in Virtual Box

  - by dewbot

  I'm using Mac OS X 10.6. I have installed Virtual Box 4.1.0 in it. My Guest OS is Ubuntu Server 11.04. I have added a rule in Port Forwarding in Virtual Box - "guestssh" TCP 127.0.1.1 8080 127.0.0.1 1337 Inside Guest OS I'm running nodejs server. Code is nothing but simple helloworld code found on their site http://nodejs.org/. In short I'm running server on 127.0.0.1 on 1337 Port. Now according to rule I have given, from Host Machine all the requests for 127.0.1.1:8080 should be forwarded to 127.0.0.1:1337 of Guest OS. From Host I'm doing curl http://127.0.1.1:8080 and I'm getting curl: (7) couldn't connect to host Is there something am I doing wrong? Note- Don't give me suggestion to do ssh n all. As my ISP does not provide Internal LAN so its not possible in my case. All I can do it Port Forwarding.

  Read the article

• What could cause a file system to spontaneously unmount or become invalid for a short time?

  - by Ichorus

  We've got DB2 LUW running on a RHEL box. We had a crash of DB2 and IBM came back and said that a file that DB2 was trying to access (through open64()) unmounted or became invalid. We have done nothing but restart the database and things seem to be running fine. Also, the file in question looks perfectly normal now: $ cd /db/log/TEAMS/tmsinst/NODE0000/TEAMS/T0000000/ $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT $ file C0000000.CAT C0000000.CAT: data $ lsattr C0000000.CAT ------------- C0000000.CAT $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT With those facts in hand (please correct me if I am mis-interpreting the data at hand) what could cause a file system to 'spontaneously unmount or become invalid for a short time'? What should my next step be? This is on Dell hardware and we ran their diagnostic tools against the hardware and it came back clean.

  Read the article

• Win Server 2008 R2 SP1 Repair Disk

  - by Horst Walter

  Is there nothing like "creating a repair disk" for Win Server 2008 R2 SP1. Or am I just missing it? Under Win7 I do just enter "Repair" and it finds "create a repair disk". Sorry - but I am not a professional Admin. Just using the server for my development environment. If there is no repair disk, is there something similar or something I should create in case I do have a system failure? Sure, a full backup is done, but anything else?

  Read the article

• Ubuntu 12.10 wont boot

  - by John Mark High

  im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

  Read the article

• Recently reloaded computer, now have trailing effect when windows overlap

  - by Tony

  I recently did a clean install of my home machine and I am having a weird graphical error where if I move one window across the top of another it leaves a trail: I have the most recent NVIDIA drivers installed and nothing new is installed on my machine than before the reload (and I never had this issue before). I have two monitors and it happens on both so I'm sure it isn't a hardware issue (the card and my main monitor are also both less than 6 months old) I've also noticed a ripple when scrolling down on web pages which I believe is related. Any ideas what might be causing this and solutions to fix it?

  Read the article

• How to deal with bad developers who hold back the project

  - by ILovePaperTowels

  We're at the end of a project, but we continue to run into issues because of a single piece of the project. This piece is handled by a specific developer. Finally, we grabbed latest and started reviewing it. It's just horrendous code! Trying to step through it was difficult and it's a relatively simple workflow. The point of this question is, how to deal with this situation. The developer has a hard time accepting criticism (constructive or otherwise) and feels he is more knowledgeable than others on the team who are, well, highly decorated, experienced and accomplished developers. It's difficult to even get into a topic about development because it turns into "I know what I'm talking about and you're just wrong!" type of conversation. A request has already been put in to replace this developer but it is a hard sell since devs are in short supply where we are and this is a corporation with a LOT of political bs. Management has been notified a few times but nothing is happening.

  Read the article

• How can I reduce the amount of time it takes to fully regression test an application ready for release?

  - by DrLazer

  An app I work on is being developed with a modified version of scrum. If you are not familiar with scrum, it's just an alternative approach to a more traditional watefall model, where a series of features are worked on for a set amount of time known as a sprint. The app is written in C# and makes use of WPF. We use Visual C# 2010 Express edition as an IDE. If we work on a sprint and add in a few new features, but do not plan to release until a further sprint is complete, then regression testing is not an issue as such. We just test the new features and give the app a good once over. However, if a release is planned that our customers can download - a full regression test is factored in. In the past this wasn't a big deal, it took 3 or 4 days and the devs simply fix up any bugs found in the regression phase, but now, as the app is getting larger and larger and incorporating more and more features, the regression is spanning out for weeks. I am interested in any methods that people know of or use that can decrease this time. At the moment the only ideas I have are to either start writing Unit Tests, which I have never fully tried out in a commercial environment, or to research the possibilty of any UI Automation API's or tools that would allow me to write a program to perform a series of batch tests. I know literally nothing about the possibilities of UI automation so any information would be valuable. I don't know that much about Unit testing either, how complicated can the tests be? Is it possible to get Unit tests to use the UI? Are there any other methods I should consider? Thanks for reading, and for any advice in advance.

  Read the article

• How to open a server port outside of an OpenVPN tunnel with a pf firewall on OSX (BSD)

  - by Timbo

  I have a Mac mini that I use as a media server running XBMC and serves media from my NAS to my stereo and TV (which has been color calibrated with a Spyder3Express, happy). The Mac runs OSX 10.8.2 and the internet connection is tunneled for general privacy over OpenVPN through Tunnelblick. I believe my anonymous VPN provider pushes "redirect_gateway" to OpenVPN/Tunnelblick because when on it effectively tunnels all non-LAN traffic in- and outbound. As an unwanted side effect that also opens the boxes server ports unprotected to the outside world and bypasses my firewall-router (Netgear SRX5308). I have run nmap from outside the LAN on the VPN IP and the server ports on the mini are clearly visible and connectable. The mini has the following ports open: ssh/22, ARD/5900 and 8080+9090 for the XBMC iOS client Constellation. I also have Synology NAS which apart from LAN file serving over AFP and WebDAV only serves up an OpenVPN/1194 and a PPTP/1732 server. When outside of the LAN I connect to this from my laptop over OpenVPN and over PPTP from my iPhone. I only want to connect through AFP/548 from the mini to the NAS. The border firewall (SRX5308) just works excellently, stable and with a very high throughput when streaming from various VOD services. My connection is a 100/10 with a close to theoretical max throughput. The ruleset is as follows Inbound: PPTP/1723 Allow always to 10.0.0.40 (NAS/VPN server) from a restricted IP range >corresponding to possible cell provider range OpenVPN/1194 Allow always to 10.0.0.40 (NAS/VPN server) from any Outbound: Default outbound policy: Allow Always OpenVPN/1194 TCP Allow always from 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) OpenVPN/1194 UDP Allow always to 10.0.0.40 (NAS) to a.b.8.1-a.b.8.254 (VPN provider) Block always from NAS to any On the Mini I have disabled the OSX Application Level Firewall because it throws popups which don't remember my choices from one time to another and that's annoying on a media server. Instead I run Little Snitch which controls outgoing connections nicely on an application level. I have configured the excellent OSX builtin firewall pf (from BSD) as follows pf.conf (Apple App firewall tie-ins removed) (# replaced with % to avoid formatting errors) ### macro name for external interface. eth_if = "en0" vpn_if = "tap0" ### wifi_if = "en1" ### %usb_if = "en3" ext_if = $eth_if LAN="{10.0.0.0/24}" ### General housekeeping rules ### ### Drop all blocked packets silently set block-policy drop ### all incoming traffic on external interface is normalized and fragmented ### packets are reassembled. scrub in on $ext_if all fragment reassemble scrub in on $vpn_if all fragment reassemble scrub out all ### exercise antispoofing on the external interface, but add the local ### loopback interface as an exception, to prevent services utilizing the ### local loop from being blocked accidentally. ### set skip on lo0 antispoof for $ext_if inet antispoof for $vpn_if inet ### spoofing protection for all interfaces block in quick from urpf-failed ############################# block all ### Access to the mini server over ssh/22 and remote desktop/5900 from LAN/en0 only pass in on $eth_if proto tcp from $LAN to any port {22, 5900, 8080, 9090} ### Allow all udp and icmp also, necessary for Constellation. Could be tightened. pass on $eth_if proto {udp, icmp} from $LAN to any ### Allow AFP to 10.0.0.40 (NAS) pass out on $eth_if proto tcp from any to 10.0.0.40 port 548 ### Allow OpenVPN tunnel setup over unprotected link (en0) only to VPN provider IPs ### and port ranges pass on $eth_if proto tcp from any to a.b.8.0/24 port 1194:1201 ### OpenVPN Tunnel rules. All traffic allowed out, only in to ports 4100-4110 ### Outgoing pings ok pass in on $vpn_if proto {tcp, udp} from any to any port 4100:4110 pass out on $vpn_if proto {tcp, udp, icmp} from any to any So what are my goals and what does the above setup achieve? (until you tell me otherwise :) 1) Full LAN access to the above ports on the mini/media server (including through my own VPN server) 2) All internet traffic from the mini/media server is anonymized and tunneled over VPN 3) If OpenVPN/Tunnelblick on the mini drops the connection, nothing is leaked both because of pf and the router outgoing ruleset. It can't even do a DNS lookup through the router. So what do I have to hide with all this? Nothing much really, I just got carried away trying to stop port scans through the VPN tunnel :) In any case this setup works perfectly and it is very stable. The Problem at last! I want to run a minecraft server and I installed that on a separate user account on the mini server (user=mc) to keep things partitioned. I don't want this server accessible through the anonymized VPN tunnel because there are lots more port scans and hacking attempts through that than over my regular IP and I don't trust java in general. So I added the following pf rule on the mini: ### Allow Minecraft public through user mc pass in on $eth_if proto {tcp,udp} from any to any port 24983 user mc pass out on $eth_if proto {tcp, udp} from any to any user mc And these additions on the border firewall: Inbound: Allow always TCP/UDP from any to 10.0.0.40 (NAS) Outbound: Allow always TCP port 80 from 10.0.0.40 to any (needed for online account checkups) This works fine but only when the OpenVPN/Tunnelblick tunnel is down. When up no connection is possbile to the minecraft server from outside of LAN. inside LAN is always OK. Everything else functions as intended. I believe the redirect_gateway push is close to the root of the problem, but I want to keep that specific VPN provider because of the fantastic throughput, price and service. The Solution? How can I open up the minecraft server port outside of the tunnel so it's only available over en0 not the VPN tunnel? Should I a static route? But I don't know which IPs will be connecting...stumbles How secure would to estimate this setup to be and do you have other improvements to share? I've searched extensively in the last few days to no avail...If you've read this far I bet you know the answer :)

  Read the article

• Quick Fix for GlassFish/MySQL NoPasswordCredential Found

  - by MarkH

  Just the other day, I stood up a GlassFish 3.1.2 server in preparation for a new web app we've developed. Since we're using MySQL as the back-end database, I configured it for MySQL (driver) and created the requisite JDBC resource and supporting connection pool. Pinging the finished pool returned a success, and all was well. Until we fired up the app, that is -- in this case, after a weekend. Funny how things seem to break when you leave them alone for a couple of days. :-) Strangely, the error indicated "No PasswordCredential found". Time to re-check that pool. All the usual properties and values were there (URL, driverClass, serverName, databaseName, portNumber, user, password) and were populated correctly. Yes, the password field, too. And it had pinged successfully. So why the problem? A bit of searching online produced enough relevant material to offer promise. I didn't take notes as I was investigating the cause (note to self), but here were the general steps I took to resolve the issue: First, per some guidance I had found, I tried resetting the password value to nothing (using () for a value). Of course, this didn't fix anything; the database account requires a password. And when I tried to put the value back, GlassFish politely refused. Hmm. I'd seen that some folks created a new pool to replace the "broken" one, and while that did work for them, it seemed to simply side-step the issue. So I deleted the password property - which GlassFish allowed me to do - and restarted the domain. Once I was back in, I re-added the password property and its value, saved it, and pinged...success! But now to the app for the litmus test. The web app worked, and everything and everyone was now happy. Not bad for a Monday.  :-D Hope this helps, Mark

  Read the article

• Computer crashes and freezes a lot

  - by Gigili

  My computer crashes like it freezes sometimes but sometimes it jumps to a black screen which I can do nothing about other than restart. I tested if it has anything to do with the programs I normally run or with the ones I installed, but it's a long time I have the problem and I think it also happened in the beginning that I bought this computer. To make sure, I normally run skype and Spiral Knights and some animation softwares like Flash. The specs are: Nvidia geforce gtx 560 evga Asus p8H67-m evo motherboard 16 gb ram Intel i7 What can I do about it? What issue is more probable to cause the problem?

  Read the article

• remove start.funmoods search from chrome

  - by Joe King

  I post this with much trepidation after my baptism by fire recently, and knowing that this question has been asked and answered already. My problem is that I cannot seem to remove start.funmoods as the default search engine when I type into the omnibox in Chrome - I have followed the instruction in the answer to the previous question on this topic. In particular: I deleted funmods using the control panel - add/remove programs Under wrench-tools-extensions funmods is not mentioned Under wrench-settings-manage search engines, there is nothing listed at all. Restarted chrome and rebooting have not helped.

  Read the article

• Strange ports on default install of W7

  - by Sabre

  I have a base new install of windows 7, and when I went to look for something else I saw the attached netstat output. What concerns me is that this is Windows + Truecrypt + drivers, nothing else installed. The sequential high ranged ports belonging to several different seemingly not out of place services seemed odd. So I torched the install, used Active@ to scrub the disk, re-downloaded the ISO from MSDN, and did a fresh reinstall, viola, they are there again. It just seems out of place, I have seen a many netstats over the years, this one just strikes me as odd, so I started thinking rootkit? (JUst FYI, when I reloaded I named the machine "Error" so that is why the task manager reads the computer name as such.) So I would like to know if anyone else could explain it, and therefore is may be normal, or would they be worried as well, and should I start considering I have some very strange thing occuring on my network?

  Read the article

• Dying SanDisk Memory Stick Pro Duo

  - by Different55

  I have a Memory Stick Pro Duo and after attempting to delete the largest file from a Mac the stick has become unusable. I can almost access it. When I put it in my PC I can open/delete/copy/paste/rename/modify one file/folder, then it can't detect the card. If I reinsert the card I can move on to the next file, but this is really annoying and my PSP won't read it at all. The memory card access light will flash for a really long time before it says that every file is corrupted. When I have tried to format it with either the PC, PSP, or a camera that uses a memory stick pro duo, it fails. I've tried with all the different options on windows, I tried formatting it through CMD, but nothing I have tried works. Should I copy every file off one by one or is there a way to fix it?

  Read the article

• Why does IIS refuse to serve ASP.NET content?

  - by Michael Haren

  My Windows Server 2003 Std server refuses to server ASP.NET content. It serves regular html just fine but anything .net, even a one line html file with an ASPX extention fails silently. Things I've tried: Nothing in the event log or IIS WWW logs when it fails. Fiddler shows no response I reinstalled .NET with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727aspnet_regiis.exe -U C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727aspnet_regiis.exe -I I give obscenely high permissions on everything I can think of (full control, read, write, etc.) to all possibly relevant users (IUSER*, ASP.NET, etc.). I confirmed that ASP.Net v1 and v2 Web Service Extensions are "allowed" in IIS Confirmed that the Server Manager had IIS and ASP.Net roles enabled Again: this is the scenario: http://localhost/Test/Default.htm <-- Works great! http://localhost/Test/Default.aspx <-- Bombs silently with no message at all Any guidance will be much appreciated! Solution: I reinstalled per the instructions below and it works now. Thanks all!

  Read the article

• NFS of NAS server blocks in cluster environment

  - by Zardoz

  In our department we have an Iomega NAS (px4-300d) connected to a Supermicro cluster with 5 nodes (12 cores per node). Each node mounts a share on that NAS by using NFS. Unfortunately after some time (several minutes) of permanent read/write operations (from all nodes) the NAS starts to block and a bit later freezes completely. We tried several options of the mount command, but nothing helped (async, intr, wsize, rsize). The NAS itself doesn't allow many options (better to say none). Do you have any recommendation how to integrate a NAS using NFS in a cluster environment?

  Read the article

• Transfer hard-drive with windows XP to another computer. On booting, asks to activate xp

  - by Jesse

  I had an old computer sitting around that I have not been able to boot successfully. I moved the hard drive and placed it in my newer computer. If I boot linux, I can mount the XP hard-drive and access the files. If I try to boot from the XP hard-drive, it will boot, but it asks me to activate windows before proceeding. If I continue, I get the "activation window" with two images/icons(?) which are failing to load. Nothing else happens. The version of windows came with the original computer the hard-drive came from, so I'm not sure if I'm married to the broken computer (I hope not!). Is there anything I can do in order to boot into XP from the new computer?

  Read the article

• Logging on to server creates duplicate user profiles in Documents & Setting

  - by Tech

  Windows Server 2003. I am having a problem with the creation of new user profiles when logging in remotely to a terminal server. The new user profile gets added under Documents & Settings as username.domainname. Deleting the new profile does not allow the original profile to be reverted to. Went logging on to the server again, it creates another new user profile. Nothing was changed in the Active Directory or security settings. How do I get the original profile to be used?

  Read the article

• Getting IIS redirects proper for second HTTP site

  - by Gotenks

  2x IIS sites on one host. I have mainsite.domain.com and secondsite.seconddomain.com. Both sites point to the same IP in public DNS. Nothing wrong with mainsite.domain.com, it redirects and goes to its own HTTPS site without issue. Going to secondsite.seconddomain.com without HTTPS, it re-directs me to the HTTPS mainsite.domain.com when I want it to go to its own secured site. It's odd that HTTPS secondsite.seconddomain.com still works as expected. Is there anyway to make HTTP of secondsite.seconddomain.com redirect to its own HTTPS entry?

  Read the article

• How to open a TrueCrypt volume quickly on a Mac?

  - by ssc

  Whenever I need to access data stored in the TrueCrypt-protected volume on my MacBook, I need to start TrueCrypt from the Dock, select the volume file, click mount, enter the password and then open a Finder window and browse to the volume. I want a quicker way, e.g. double-click something on the desktop (and/or press a hotkey combination), enter the password and have a Finder window pop up. I have done an extensive research on the TrueCrypt website, Apple Automator and some other approaches, but nothing really seems come up. Has anyone realized the approach described ?

  Read the article

• how to uninstall the jdk 1.7.0 in the ubuntu

  - by kaiwii ho

  i encounter a very strange problem,and here is the detail: i'm going to uninstall the jdk 1.7.0.but when i use the rpm to check the appropriate name of the package,it prompt nothing.Anyway,when i use the command java -version,it will prompt the detail of the jdk 1.7.0. below is the detail: root@kaiwiiho:/usr/java# rpm -qa|grep jdk root@kaiwiiho:/usr/java# java -version java version "1.7.0" Java(TM) SE Runtime Environment (build 1.7.0-b147) Java HotSpot(TM) Server VM (build 21.0-b17, mixed mode) root@kaiwiiho:/usr/java# rpm -qa|grep jdk root@kaiwiiho:/usr/java# so what happen?And how can i uninstall it?thx

  Read the article

• Touchpad won't work/not recognized on laptop, Ubuntu 11.10

  - by The_McManus_Position

  When I start out running 11.10 (Ocelot) from the Live CD the touchpad works with no problem. Once installing however the touchpad does not work at all. I have installed all updates available. I have tried installing the synaptiks touchpad package and the gpointer package from the software manager, this did not help. Under System Settings - Mouse and Touchpad there is only a mouse tab, no touchpad tab. It seems my touchpad is not even recognized. I have tried running several things in the terminal that I have found under similar questions, but I always get errors about the files not being found, or the drivers not being found. Have tried: sudo modprobe -r psmouse sudo modprobe psmouse proto=imps This results in an error message. dconf-editor Can load the GUI, but after that I can't seem to navigate through it to find the files that need editing. Read what's listed here. But I've got no GRUB, running only Ubuntu. As you can see I've been trying several things and nothing has worked so far, would appreciate any help. Thanks!

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works fine

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• iTunes + External Hard Drive problem

  - by Samwho

  Okay, so I've always stored my music on my external hard drive and run it from there with iTunes. Recently, however, it's being a little awkward. I think it was because I accidentally tried to run a song off my hard drive when it wasn't plugged in and, as would be expected, it said it couldn't find it. So I plug the hard drive in, locate the file and off it goes. But now it won't find any of the files... When I go to the "Get Info" page on the right click menu on a song I notice it has prepended file://localhost/ to everything, so my paths look like this: "file://localhost/E:/Sam/Media/Music/[song name]" I went into the iTunes Music Library.xml file and did a search and replace for file://localhost/ and replaced it with nothing and tried opening iTunes again and it just added file://localhost/ to every file again! Anyone have any idea why it does this and how to fix it without reimporting my library?

  Read the article

• UsrClass.dat does not load, any ideas on what to check?

  - by Bob Simmons

  I have an odd problem where one of my users' UsrClass.dat hive does not load, which causes .NET ClickOnce applications to fail to start. They are one of several users on a Windows 2000 terminal server, all the others have no problem. Nothing is mentioned in any logs. I can manually load the hive to the correct HKEY_USERS\..._Classes location using REGEDT32, which works around the problem, but I've no idea what could be causing this in the first place. Any ideas what to check here, or any diagnostic tools or procedures that would help?

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >