Search Results

Search found 10481 results on 420 pages for 'port mirroring'.

Page 329/420 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Wireless not working on Dell Inspirion 1501 after upgrading to Ubuntu 12.04 tried steps in other threads

  - by mark burton

  I updated to Ubuntu 12.04 and now my wireless is not working. No icon for it. Tried some of the troubleshooting in other threads but can't get it to work. Would really appreciate any help Thanks! " *-network description: Network controller product: BCM4311 802.11a/b/g vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 02 serial: 00:19:b9:5c:d1:52 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=10.0.0.6 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff " lsub results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS482 [Radeon Xpress 200M] 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01) rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• What are these errors when I try to "make" the driver of my wireless adapter?

  - by Tom Brito

  I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

  Read the article

• Intel Centrino Wireless N 1000 doesn't work on a Lenovo Z560

  - by Timetraveler

  I upgraded my Ubuntu 11.04 to 11.10 and my Wifi has stopped working. I have a Lenovo Z560 that has Intel centrino wireless-N 1000. I have searched various threads having similar problems for a solution and have no success. The wlan0 is not even showing up in rfkill. Please help me find a solution. I am giving below the output of various debug commands. Thanks in advance. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" ----##uname -a Linux gurucharapathy-laptop 3.0.0-17-generic-pae #30-Ubuntu SMP Thu Mar 8 17:53:35 UTC 2012 i686 i686 i386 GNU/Linux ----##lspci -nnk | grep -iA2 net 05:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Kernel modules: iwlagn 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 ----##iwconfig lo no wireless extensions. eth0 no wireless extensions. ----##iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. ----##rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no ----##lsmod Module Size Used by rfcomm 38408 8 bnep 17923 2 parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 snd_hda_codec_hdmi 31426 1 snd_hda_codec_conexant 52460 1 uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec joydev 17393 0 snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 i915 509554 9 drm_kms_helper 32889 1 i915 snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28932 2 snd_pcm,snd_seq drm 196290 5 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mei 36466 0 mac80211 393421 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 13575 0 intel_ips 17753 0 btusb 18160 2 i2c_algo_bit 13199 1 i915 soundcore 12600 1 snd bluetooth 148839 23 rfcomm,bnep,btusb cfg80211 172427 1 mac80211 psmouse 63474 0 serio_raw 12990 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm sparse_keymap 13658 1 ideapad_laptop wmi 18744 0 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 2 libahci 25761 1 ahci r8169 47200 0 ----##nm-tool NetworkManager Tool State: asleep Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: r8169 State: unmanaged Default: no HW Address: 88:AE:1D:DE:5F:9C Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on ----##lshw -C network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d6400000-d6401fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:de:5f:9c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.0.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff

  Read the article

• Endeca Information Discovery 3-Day Hands-on Training Workshop

  - by Mike.Hallett(at)Oracle-BI&EPM

  For Oracle Partners, on October 3-5, 2012 in Milan, Italy: Register here. Endeca Information Discovery plays a key role with your big data analysis and complements Oracle Business Intelligence Solutions such as OBIEE. This FREE hands-on workshop for Oracle Partners highlights technical know-how of the product and helps understand its value proposition. We will walk you through four key components of the product: Oracle Endeca Server—A highly scalable, search-analytical database that derives the data model based on the data presented to it, thereby reducing data modeling requirements. Studio—A highly interactive, component-based user interface for configuring advanced, yet intuitive, analytical applications. Integration Suite—Provides rapid unification and enrichment of diverse sources of information into a single integrated view. Extensible Value-Added Modules—Add-on modules that provide value quickly through configuration instead of custom coding. Topics covered will include Data Exploration with Endeca Information Discovery, Data Ingest, Project Lifecycle, Building an Endeca Server data model and advanced modeling techniques, and Working with Studio. Lab Outline The labs showcase Oracle Endeca Information Discovery components and functionality by providing expertise on features and know-how of building such applications. The hands-on activities are based on a Quick Start application provided during the class. Audience Oracle Partners, Big Data Analytics Developer and Architects BI and EPM Application Developers and Implementers, Data Warehouse Developers Equipment Requirements This workshop requires attendees to provide their own laptops for this class. Attendee laptops must meet the following minimum hardware/software requirements: Hardware 8GB RAM is highly recommended (Windows 64 bit Machine is required) 40 GB free space (includes staging) USB 2.0 port (at least one available) Software One of the following operating systems: 64-bit Windows host/laptop OS (Windows 7 or Windows Server 2008) 64-bit host/laptop OS with a Windows VM (Server, or Win 7, BIC2g, etc.) Internet Explorer 8.x , Firefox 3.6 or Firefox 6.0 WINRAR or 7ziputility to unzip workshop files: Download-able from http://www.win-rar.com/download.html Download-able from http://www.7zip.com/ Oracle Endeca Information Discovery Workshop Register here: October 3-5, 2012: Cinisello Balsamo, Milan.  We will confirm with you your place within 2 weeks. Questions?  Send email to: [email protected]  :  Oracle Platform Technologies Enablement Services.

  Read the article

• RPi and Java Embedded GPIO: Sensor Connections for Java Enabled Interface

  - by hinkmond

  Now we're ready to connect the hardware needed to make a static electricity sensor for the Raspberry Pi and use Java code to access it through a GPIO port. First, very carefully bend the NTE312 (or MPF-102) transistor "gate" pin (see the diagram on the back of the package or refer to the pin diagram on the Web). You can see it in the inset photo on the bottom left corner. I bent the leftmost pin of the NTE312 transistor as I held the flat part toward me. That is going to be your antenna. So, connect one of the jumper wires to the bent pin. I used the dark green jumper wire (looks almost black; coiled at the bottom) in the photo. Then push the other 2 pins of the transistor into your breadboard. Connect one of the pins to Pin # 1 (3.3V) on the GPIO header of your RPi. See the diagram if you need to glance back at it. In the photo, that's the orange jumper wire. And connect the final unconnected transistor pin to Pin # 22 (GPIO25) on the RPi header. That's the blue jumper wire in my photo. For reference, connect the LED anode (long pin on a common anode LED/short pin on a common cathode LED, check your LED pin diagram) to the same breadboard hole that is connecting to Pin # 22 (same row of holes where the blue wire is connected), and connect the other pin of the LED to GROUND (row of holes that connect to the black wire in the photo). Test by blowing up a balloon, rubbing it on your hair (or your co-worker's hair, if you are hair-challenged) to statically charge it, and bringing it near your antenna (green wire in the photo). The LED should light up when it's near and go off when you pull it away. If you need more static charge, find a co-worker with really long hair, or rub the balloon on a piece of silk (which is just as good but not as fun). Next blog post is where we do some Java coding to access this sensor on your RPi. Finally, back to software! Ha! Hinkmond

  Read the article

• KVM Bridged Network Not Working

  - by EApubs

  I just installed KVM on my Ubuntu Server according to this guide : https://help.ubuntu.com/community/KVM/Installation Then prepared a bridged network as shown in here : https://help.ubuntu.com/community/KVM/Networking Then, I created a virtual machine with virt-manager. I tried several times but the guest fails to connect to the network! Any help? ifconfig : br0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 inet addr:192.168.20.100 Bcast:192.168.20.255 Mask:255.255.255.0 inet6 addr: fe80::d227:88ff:feb0:e438/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10493 (10.4 KB) TX bytes:8433 (8.4 KB) eth0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:63 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11361 (11.3 KB) TX bytes:8479 (8.4 KB) Interrupt:41 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) virbr0 Link encap:Ethernet HWaddr 5a:8c:57:95:af:3b inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) brctl show : bridge name bridge id STP enabled interfaces br0 8000.d02788b0e438 no eth0 virbr0 8000.000000000000 yes brctl showmacs br0 : port no mac addr is local? ageing timer 1 5c:d9:98:67:b6:28 no 48.33 1 d0:27:88:b0:e4:38 yes 0.00 1 e0:2a:82:f9:6c:09 no 0.00 ip route : default via 192.168.20.1 dev br0 metric 100 192.168.20.0/24 dev br0 proto kernel scope link src 192.168.20.100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 *In the guest * I was unable to copy paste the info from the guest because can't ssh to it. It didn't get any ip from DHCP. Won't work even after setting it up manually.

  Read the article

• Can I prevent an IDENTIFY PACKET DEVICE command to a specific device at boot?

  - by Brian Spisak

  This is related to a previous question related to installation that is now resolved. I'm opening a new question, because I still need to get my DVD drive working. Problem: Failed boot when my ASUS DRW-24B1/ST DVD drive is attached to my asmedia ASM1061. Symptom: ata8.00: exception Emask 0x52 Sact 0x0 SErr 0xffffffff action 0xe frozen ata8: SError: { blah blah } ata8.00: failed command: IDENTIFY PACKET DEVICE ata8.00: cmd blah blah res blah blah (ATA bus error) ata8.00: status: { DRDY } ata8: hard resetting link Background: The ASM1061 is a PCIe to SATA bridge providing 2 x 6Gb/s ports and is supposed to be fully compliant to SATA specs. I just discovered in the fine print of my ASUS P8Z77-V pro motherboard that "These SATA ports are for data hard drivers only. ATAPI devices are not supported." However, I have already installed Windows 7 using this drive and I can run the Ubuntu 12.04 installer from it as well. The only time I have a problem is during Ubuntu boot when it tries an IDENTIFY PACKET DEVICE which seems to be an ATAPI command. I can't simply switch this device to another SATA port because they are already allocated to other devices. (My chipset's 2 x 6Gb/s are connected to my boot SSD and a fast HDD while the 4 x 3Gb/s ports are running a RAID 5 array.) If this can't be fixed or worked around, I suppose I'll have to go buy SATA add-in card. Blech. Thoughts: If indeed this is a device specific issue (that it doesn't support ATAPI discovery) then I can't expect - is it udev? - to work with it. But, it seems that Windows and even the Ubuntu installer work just fine. So why does udev have a problem? At the end of the day, it would be nice to have the DVD working under Ubuntu, but I can live without it. But, as this is a dual-boot machine, I can't physically disconnect it because I want it to work with Windows. (And physically disconnecting it every time I want to boot Ubuntu is NOT an option. ;-) Questions: Should this be considered a bug? My feelings are that if it works with other OS that it should probably work with Ubuntu as well. How can I work around this problem? I have a limited knowledge of linux internals, but it seems I should be able to somehow tell udev (or whatever is doing the discovery) to ignore that device. Is there a way?

  Read the article

• Ubuntu Server Cannot Route to the Internet

  - by ejes

  I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

  Read the article

• Apache - create multiple aliases

  - by mc3mcintyre

  I'm trying to setup two websites on my Apache server. One is www.domain.com and the other is test.domain.com. Currently, my 000-default.conf file reads as follows: <VirtualHost www:80> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. #ServerName www.domain.com #ServerAlias www ServerAdmin [email protected] DocumentRoot /var/www/domain.com/ # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/domain.error.log CustomLog ${APACHE_LOG_DIR}/domain.access.log combined UseCanonicalName on allow from all Options +Indexes # For most configuration files from conf-available/, which are # enabled or disabled at a global level, it is possible to # include a line for only one particular virtual host. For example the # following line enables the CGI configuration for this host only # after it has been globally disabled with "a2disconf". #Include conf-available/serve-cgi-bin.conf </VirtualHost> <VirtualHost test:80> DocumentRoot "/var/www/domain.com/test/" ServerName test.domain.com ServerAdmin [email protected] ErrorLog ${APACHE_LOG_DIR}/test.domain.error.log CustomLog ${APACHE_LOG_DIR}/test.domain.access.log combined UseCanonicalName on allow from all Options +Indexes </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet As is, when I use a browser to go to the www location, it show me a directory listing. However, if I remove the www:80 on Line 1 and replace it with *:80, it correctly displays the webpage. I don't understand why. Can anyone help me configure this 000-default.conf file so that www goes to "/var/www/domain.com" and that test goes to "/var/www/domain.com/test"? Thank you.

  Read the article

• Investing in Servers by Intel

  - by Koushal Deshpande

  Originally posted on: http://geekswithblogs.net/BizTalkAndOtherTechs/archive/2013/10/31/investing-in-servers-by-intel.aspxA nice article reference from Intel, refer here. Referees to cloud as well. Choose correctly what you need. 1 Do determine right server for your company. There is no use getting a server that has redundant services but still add to the costs. 2 Do get servers that can be upgraded. A server with limited memory and storage may not be able to keep up with your business growth. The basic memory and storage options might not be sufficient. Consider at least 8GB of RAM and 1 terabyte of hard disk space. 3 Do check the server has at least one Gigabit Ethernet port. This allows high speed transferring of files and increases productivity for your employees. USB and Firewire ports may not be enough as their transfer speed is too low and will affect the productivity of your company. Infinite Technologies is ready to help perform this upgrade. Contact Infinite Technologies now View our other resellers » 4 Do verify that the server comes with documentation. Documentation allows you to make a claim when your server breaks down and is supported by a warranty. 6 Do check the support options for the server from the manufacturer. Different manufacturer has different support options such as maintenance plans and software upgrades. 5 Do always look into the warranty. Get an enhanced warranty that guarantees response and repair time to avoid disruption. 7 Do get server management tools that can be used on any computer. Server management tools should be cross compatible across different operating systems to take into account future PC replacements. 8 Do check the power usage of the servers. Get the right power supply to avoid damaging server hardware and consider the Intel® Xeon® E3 processor to help save on your electricity bills. 9 Do check what built-in security packages are available. Ensure that your server is protected. Built-in security1 helps you save on getting add on security packages.

  Read the article

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• Best Language for the job? Database | C++, .NET, Java

  - by Randy E

  Ok, quick overview. I'm pretty brand new to software design. I have experience reading and editing/customizing PHP things for online scripts/software; Such as CMS, Wordpress, some forum solutions. I'm about to begin my degree in Software Design, the school I'm going to will allow us to kind of focus on an area, C++, Java, or .NET. I've played around a little with VB over the past week, mostly just trying to get a slight feel for it, however nothing extensive. I've been through Herbert Schildt's "C++, A Beginner's Guide." but I was mainly reading it, not doing anything with it beyond a couple basic Console Apps (and getting frustrated with auto-close :/ ). Now, where I decide to focus more in with my degree will depend on what the best language for the job is for my first piece of software I want to develop on my own. Assume I haven't looked at any of the languages at all, please help with the following: My first piece of software will be a database program. Everything has to do with users inputting and retrieving data, and calling that data to help with another function of the software, automatically calculating billing information based on information inputted in the other portion of the program. I won't go into too many details as I'm targeting a niche that doesn't have too much competition, but the competition that is there is established. I want to offer more features, scalable solutions, and the ability to port it to an online version. Ok, basically, it is a complete case management with integrated billing for Private Investigators. I would like the case management to be able to check the Database to see if certain information has been inputted before (such as Names/SSN's), and then the billing will pull hours inputted in the case portion for investigative work, multiplying by an already inputted amount for the fee, and then calculate sales tax. I also want to provide potential clients with an easily scalable solution, that is, a basic option for start ups that costs the least amount, with no additional users, ran on one machine. A middle option with the ability to create users and place them in two groups (User or Admin), as well as adding a few additional features, ran on one machine, but this will allow it to be accessed after being mapped on a network drive. And a third option to allow the placement into 4 different groups (Investigators, Billing, Managers, Admins) and more features. And then, a couple of years after launch, a 4th option that is browser based allowing the same 4 groups to login, as well as clients (view things concerning their case, with some admin customizable objects that can be added for clients view), over the internet. The only licensing security I would like to employ right off the bat will be serial key generated after ordering online (received in an email after the successful purchase). The program will access a database stored on a server periodically to verify license. I would like it to be able to check to make sure it's the most updated version and automatically update if not.

  Read the article

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• Precise Touch Screen Dragging Issue: Trouble Aligning with the Finger due to Different Screen Resolution

  - by David Dimalanta

  Please, I need your help. I'm trying to make a game that will drag-n-drop a sprite/image while my finger follows precisely with the image without being offset. When I'm trying on a 900x1280 (in X [900] and Y [1280]) screen resolution of the Google Nexus 7 tablet, it follows precisely. However, if I try testing on a phone smaller than 900x1280, my finger and the image won't aligned properly and correctly except it still dragging. This is the code I used for making a sprite dragging with my finger under touchDragged(): x = ((screenX + Gdx.input.getX())/2) - (fruit.width/2); y = ((camera_2.viewportHeight * multiplier) - ((screenY + Gdx.input.getY())/2) - (fruit.width/2)); This code above will make the finger and the image/sprite stays together in place while dragging but only works on 900x1280. You'll be wondering there's camera_2.viewportHeight in my code. Here are for two reasons: to prevent inverted drag (e.g. when you swipe with your finger downwards, the sprite moves upward instead) and baseline for reading coordinate...I think. Now when I'm adding another orthographic camera named camera_1 and changing its setting, I recently used it for adjusting the falling object by meter per pixel. Also, it seems effective independently for smartphones that has smaller resolution and this is what I used here: show() camera_1 = new OrthographicCamera(); camera_1.viewportHeight = 280; // --> I set it to a smaller view port height so that the object would fall faster, decreasing the chance of drag force. camera_1.viewportWidth = 196; // --> Make it proportion to the original screen view size as possible. camera_1.position.set(camera_1.viewportWidth * 0.5f, camera_1.viewportHeight * 0.5f, 0f); camera_1.update(); touchDragged() x = ((screenX + (camera_1.viewportWidth/Gdx.input.getX()))/2) - (fruit.width/2); y = ((camera_1.viewportHeight * multiplier) - ((screenY + (camera_1.viewportHeight/Gdx.input.getY()))/2) - (fruit.width/2)); But the result instead of just following the image/sprite closely to my finger, it still has a space/gap between the sprite/image and the finger. It is possibly dependent on coordinates based on the screen resolution. I'm trying to drag the blueberry sprite with my finger. My expectation did not met since I want my finger and the sprite/image (blueberry) to stay close together while dragging until I release it. Here's what it looks like: I got to figure it out how to make independent on all screen sizes by just following the image/sprite closely to my finger while dragging even on most different screen sizes instead.

  Read the article

• How to wrap console utils in webserver

  - by Alex Brown

  I have a big dataset (100Mbs/day) and a bunch of console a TCL/TK tools to view it - I want to turn it into a web app that I can build, and others can maintain. In long: my group runs simulations yielding 100s of Mbs of data daily, in multiple (mostly but not only) text forms. We have a bunch of scripts and tools, mostly old school 1990's style stuff requiring a 5-button mouse, as well as lots of ad-hoc scripts that engineers build out of frustration every month or so. These produces UIs, graphs, spreadsheets (various sizes), logs, event histories etc. I want to replace (or at least supplement) the xwindows / console style UI with a web-based one, so I need the following properties: pleasant to program can wrap existing command-line tools in separate views (I don't need to scrape GUIs or anything) as I port logic from the existing scripts I can create a modularised and pleasant codebase to replace it I can attach a web-ui to navigate between views - each view is likely to contain keys which might make sense to view in another I am new to building systems that have logic on the back-end and front-end of a web-server. from that point of view, they do this: backend wraps old-school executables, constructs calls into them and them takes the output and wraps it up, niceifies it and delivers it to the web client. For instance the tool might generate a number of indexed images (per invocation) which I might deliver all at once or on-demand. May (probably) need to to heavy stats on some sources. frontend provides navigation connecting multiple views, performs requests from one view for data from another (or self to self), etc. Probably will have some views with a lot of interactivity. Can people please point me towards viable solutions for this? I know it's a bit of an open question so as answers come in I hope to refine the spec until we have a good match. I guess I expect to see answers like "RoR!" "beans!" "Scala!" but please give an indication of why those are a good fit; I know nothing! I got bumped off SO for asking an open-ended question, so sorry if its OT here too (let me know). I take the policy that I use the best/closest matched language for a project but most of my team are extremely low level (ie pipeline stages and CDyn) so I don't have the peer group to know where to start.

  Read the article

• Application Integration Future &ndash; BizTalk Server &amp; Windows Azure (TechEd 2012)

  - by SURESH GIRIRAJAN

  I am really excited to see lot of new news around BizTalk in TechEd 2012. I was recently watching the session presented by Sriram and Rajesh on “Application Integration Futures: The Road Map and What's Next on Windows Azure”. It was great session and lot of interesting stuff about the feature updates for BizTalk and Azure integration. I have highlighted them below, definitely customers who haven’t started using Microsoft BizTalk ESB Toolkit should start using them which is going to be part of the core BizTalk product in future release, which is cool… BizTalk Server feature enhancements Manageability: ESB Tool Kit is going to be part of the core BizTalk product and Setup. Visualize BizTalk artifact dependencies in BizTalk administration console. HIS administration using configuration files. Performance: Improvements in ordered send port scenarios Improved performance in dynamic send ports and ESB, also to configure BizTalk host handler for dynamic send ports. Right now it runs under default host, which does not enable to scale. MLLP adapter enhancements and DB2 client transaction load balancing / client bulk insert. Platform Support: Visual Studio 2012, Windows 8 Server, SQL Server 2012, Office 15 and System Center 2012. B2B enhancements to support latest industry standards natively. Connectivity Improvements: Consume REST service directly in BizTalk SharePoint integration made easier. Improvements to SMTP adapter, to add macros for sending same email with different content to different parties. Connectivity to Azure Service Bus relay, queues and topics. DB2 client connectivity to SQL Server and SQL Server connectivity to Informix. CICS Http client connectivity to Windows. Azure: Use Azure as IaaS/PaaS for BizTalk environment. Use Azure to provision BizTalk environment for test environment / development. Later move to On-premises or build a Hybrid cloud approach. Eliminate HW procurement for BizTalk environment for testing / demos / development etc. Enable to create BizTalk farm easily and remove/add more servers as needed. EAI Service: EAI Bridge Protocol transformation Message Transformation Running custom code Message Enrichment Hybrid Connectivity LOB Applications On-premises Application On-premises Connectivity to Applications in the cloud Queues/ Topics Ftp Devices Web Services Bridge can be customized based on the service needs to provide different capabilities needed as part of the bridge. Look at the sample for EDI bridge for EDI service sample. Also with Tracking enabled through the portal. http://msdn.microsoft.com/en-us/library/windowsazure/hh674490 Adapters: Service Bus Messaging adapter - New adapter added. WebHttp adapter - For REST services. NetTcpRelay adapter - New adapter added. I will start posting more and once I start playing with this…

  Read the article

• How to leverage the internal HTTP endpoint available on Azure web roles?

  - by Alfredo Delsors

  Imagine you have a Web application using an in-memory collection that changes occasionally but is used very often. The collection gets loaded from storage on the Application_Start global.asax event and is updated whenever its content changes. If you want to deploy this application on Azure you need to keep in mind that more than one instance of the application can be running at any time and therefore you need to provide some mechanism to keep all instances informed with the latest changes. Because the communication through internal endpoints between Azure role instances is at no cost, a good solution can be maintaining the information on Azure Storage Tables, reading its contents on the Application_Start event and populating its changes to all other instances using the internal HTTP port available on Azure Web Roles. You need to follow these steps to leverage the internal HTTP endpoint available on Azure web roles to maintain all instances up to date. 1.   Define an internal HTTP endpoint in the Web Role properties, for example InternalHttpEndpoint   2.   Add a new WCF service to the Web Role, for example NotificationService.svc 3.   Disable multiple site bindings in web.config: <serviceHostingEnvironment multipleSiteBindingsEnabled="false"> 4.   Add a method on the new service to receive notifications from other role instances. namespace Service { [ServiceContract] public interface INotificationService { [OperationContract(IsOneWay = true)] void Notify(Information info); } } 5.   Declare a class that inherits from System.ServiceModel.Activation.ServiceHostFactory and override the method CreateServiceHost to host the internal endpoint. public class InternalServiceFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { var internalEndpointAddress = string.Format( "http://{0}/NotificationService.svc", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["InternalHttpEndpoint"].IPEndpoint); ServiceHost host = new ServiceHost( typeof(NotificationService), new Uri(internalEndpointAddress)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); host.AddServiceEndpoint( typeof(INotificationService), binding, internalEndpointAddress); return host; } } Note that you can use SecurityMode.None because the internal endpoint is private to the instances of the service. 6.   Edit the markup of the service right clicking the svc file and selecting "View markup" to add the new factory as the factory to be used to create the service <%@ ServiceHost Language="C#" Debug="true" Factory="Service.InternalServiceFactory" Service="Service.NotificationService" CodeBehind="NotificationService.svc.cs" %> 7.   Now you can notify changes to other instances using this code: var current = RoleEnvironment.CurrentRoleInstance; var endPoints = current.Role.Instances .Where(instance => instance != current) .Select(instance => instance.InstanceEndpoints["InternalHttpEndpoint"]); foreach (var ep in endPoints) { EndpointAddress address = new EndpointAddress( String.Format("http://{0}/NotificationService.svc", ep.IPEndpoint)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); var factory = new ChannelFactory<INotificationService>(binding); INotificationService instance = factory.CreateChannel(address); instance.Notify(changedinfo); }

  Read the article

• How to deal with Warning : "Uncommittable transaction is detected at the end of the batch. The trans

  - by VishnuTiwariBlog

  Hi, If you are integrating with SQL Server and dealing with batch messages, you may encounter this problem. And this is evitable. The reason is the contention of resources. If your batch contains four messages and all the four messages have to be updated to SQL Server and then at the same time four process will contend for SQL server table and resources and the obvious result will be, few of your transaction will be left uncomitted and if you are not handling dehydration [not modifying the default property of the Dehydration] then your orchestration will dehydrate and will go for retry. If retry is set for every five minutes then after five minutes Port will send the message to the database. Reason for writing this post was as I did not want to see so many DEHYDRATED messages. And this was happening as Host Throttling was not set. Thus as soon as the BizTalk Process finds that SQL resources are unavailable it will go and dehydrate that process and process will go for retry. The contension of resources is unavoidable though we can fine tune the Dehydration setting. If you increase the time that an orchestration can be blocked at a subscription before being dehydrated, possibly you will give more time BizTalk Engine to handle to SQL resource availability. At least I solve the problem by fine tuning the Dehydration properties. Below is the section of config info which you need to add to the BTSNTsvc.exe.config.   <?xml version="1.0" ?> <configuration>        <configSections>               <section name="xlangs" type="Microsoft.XLANGs.BizTalk.CrossProcess.XmlSerializationConfigurationSectionHandler, Microsoft.XLANGs.BizTalk.CrossProcess" />        </configSections>        <runtime>               <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">                      <probing privatePath="BizTalk Assemblies;Developer Tools;Tracking" />               </assemblyBinding>        </runtime>        <xlangs>               <Configuration>                      <Dehydration MaxThreshold="1800" MinThreshold="1" ConstantThreshold="-1">                             <VirtualMemoryThrottlingCriteria OptimalUsage="900" MaximalUsage="1300" IsActive="true" />                             <PrivateMemoryThrottlingCriteria OptimalUsage="50" MaximalUsage="350" IsActive="true" />                             <PhysicalMemoryThrottlingCriteria OptimalUsage="50" MaximalUsage="350" IsActive="false" />                      </Dehydration>               </Configuration>        </xlangs> </configuration>

  Read the article

• Using Network load balancing to distribute load for SharePoint2010 – Part3 of building my own development SharePoint2010 Farm

  - by ybbest

  Part1 of building my own development SharePoint2010 Farm Part2 of building my own development SharePoint2010 Farm Part3 of building my own development SharePoint2010 Farm In my last post, I have installed SharePoint2010 in one of the server (WFE One) and configured using the OOB SharePoint configuration wizard. In this post I will show you how to use OOB windows network load balancing to distribute load for SharePoint2010 site. 1. Install SharePoint in another server WFE Two (you can follow the steps in my last post), but instead of choosing create new Farm, you need to select “connect to existing farm” this time. 2. Click next then click retrieve database names button and select the farm configuration database. 3. Click next and enter the passphrase you specified when you first installed the SharePoint Farm. 4. Click the advanced settings and select Use this machine to host the web site. 5. Click OK to finish the configurations 6. Next, Install NLB in the two WFE (web front end) SharePoint servers 7. Configure NLB to create the cluster. Go to Start—Administrative Tools—Network Load Balancing Manager 8. Right-click the Network Load Balancing Clusters Node and select New Cluster. 9. Type in the host name that is to be part of the new cluster. 10. Type in the IP address for the cluster. 11. Select the Multicast for this cluster.(The default one is Unicast) 12. You can configure the Port Rules for the clustering , but I will leave the default here. 13. Add another WEF to the cluster. 14. Type in the host name that is to be part of the new cluster. 15. Set the Priority to 2. 16. Click Next to complete the cluster setup. 17. Create an entry in the DNS for the new cluster. 18. Add the binding to the IIS site in the IIS Manager 19. Change the Alternate access mapping for you default site collection from http://sp2010wefone to http://team 20. Browse to http://Team , you will be redirected to the SharePoint site.

  Read the article

• Unable to connect to mail server via IMAP and roundcube

  - by mrhatter

  I am having trouble getting the final parts of my mail server up and working. I followed this tutorial to get everything set up on the mail server side. I have installed roundcube for webmail and configured it but it is saying "error connecting, connection refused" when attempting to connect to it using IMAP. This is thorough the "test imap" section of its installer. Also it is giving me an error message about perissions for it's log and temp folders but that's not as important as acutally getting mail to work. I have also tried connecting to the mail server using thunderbird however it cannot establish a connection either and I know my login information is correct. I know that the databases are working correctly based on the roundcube installer telling me that they have been "successfully initialized". Here are my firewall rules -A INPUT -i lo -j ACCEPT -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 465 -j ACCEPT -A INPUT -p tcp -m tcp --dport 487 -j ACCEPT -A OUTPUT -p tcp -m tcp --dport 993 -j ACCEPT -A INPUT -j DROP Which I set up in iptables. I have modified them from what I used in this tutorial I'm not sure what to try next. Any help would be wonderful! I am using Ubuntu 14.04 server, apache 2.4.7, roundcube 1.0.1, and the latest versions of dovecot and postfix. The email databases are contained in mysql. I am running this on a VPS server. UPDATE: I have changed from iptables to using ufw. I have run the following commands to set up a basic firewall with ufw. ufw default deny ufw allow ssh ufw allow http ufw allow https ufw allow imap ufw allow imaps ufw allow smtp I then used telnet to check all of the mail ports. But Port 993 isnt working even though ufw says both 993 and 993/tcp are open. What am I missing?

  Read the article

• Alfa AWUS036H USB wireless adapter not recognized

  - by GFiasco

  The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

  Read the article

• Java: How to manage UDP client-server state

  - by user92947

  I am trying to write a Java application that works similar to MapReduce. There is a server and several workers. Workers may come and go as they please and the membership to the group has a soft-state. To become a part of the group, the worker must send a UDP datagram to the server, but to continue to be part of the group, the worker must send the UDP datagram to the server every 5 minutes. In order to accommodate temporary errors, a worker is allowed to miss as many as two consecutive periodic UDP datagrams. So, the server must keep track of the current set of workers as well as the last time each worker had sent a UDP datagram. I've implemented a class called WorkerListener that implements Runnable and listens to UDP datagrams on a particular UDP port. Now, to keep track of active workers, this class may maintain a HashSet (or HashMap). When a datagram is received, the server may query the HashSet to check if it is a new member. If so, it can add the new worker to the group by adding an entry into the HashSet. If not, it must reset a "timer" for the worker, noting that it has just heard from the corresponding worker. I'm using the word timer in a generic sense. It doesn't have to be a clock of sorts. Perhaps this could also be implemented using int or long variables. Also, the server must run a thread that continuously monitors the timers for the workers to see that a client that times out on two consecutive datagram intervals, it is removed from the HashSet. I don't want to do this in the WorkerListener thread because it would be blocking on the UDP datagram receive() function. If I create a separate thread to monitor the worker HashSet, it would need to be a different class, perhaps WorkerRegistrar. I must share the HashSet with that thread. Mutual exclusion must also be implemented, then. My question is, what is the best way to do this? Pointers to some sample implementation would be great. I want to use the barebones JDK implementation, and not some fancy state maintenance API that takes care of everything, because I want this to be a useful demonstration for a class that I am teaching. Thanks

  Read the article

• BizTalk: Using context for routing

  - by Leonid Ganeline

  [See Sample: Context routing and throttling with orchestration] Imagine the project where most of the routing happens between orchestrations. I.e. routing is mostly between the MessageBox and orchestration with direct endpoints. Imagine also the most of the messages are with the same Message type. Usually in this case messages got the special node only for the routing. For example, the field can be the “Originator” or “Recipient” or “From” or “To”. What wrong is with this approach, it creates the dependency between the message and the message processing. Message “knows” something about Originator or Recipient. So what we can do with it? How can we “colorize” the same message to route it to the different places without changing the message itself? One of the decisions is to use the message context. BizTalk uses the promoted properties for routing.  There are two kinds of the properties: the content properties and the context properties. The content property extracts its value from inside the message, it is a value of the element or attribute. [See MSDN] The context property gets its value from the message environment. It can be the port name that receive this message, it can be the message Id, created by the BizTalk. Context properties look like the headers in the SOAP message. Actually they are not the headers but behave like headers. The context properties are the good match for our case. First, we don’t have to change the message itself to set or change the routing property. The context is stored outside the message body. Second, we don’t have to create the property schema to use the context properties. [See MSDN: How to create Property schema] BizTalk has the predefined schema set for the context properties. [See MSDN: Message Context Properties] Use one of them and that's it. The main purpose of the context properties is working on behalf of the BizTalk internals. But we can read, create and change them. Just do not interfere with BizTalk internals on this way.

  Read the article

• WebLogic Partner Community Newsletter May 2014

  - by JuergenKress

  Dear WebLogic Partner Community member, Registration for the Fusion Middleware Summer Camps 2014 is open – Register asap for one of our bootcamps August 4th – 8th 2014 in Lisbon. Please read details and pre-requisitions careful before you register. We expect that like in the past, the conference will be booked out soon! Thanks to you our WebLogic Specialized Partners Oracle is #1 for Worldwide Market-Share Total Software Revenue in the Application Platform Market Segment for 2013. Want to know why, get the new recipes for Oracle WebLogic 12.1.2. Looking for the right server to run WebLogic – try WebLogic on Oracle Database Appliance 2.9. Want to install WebLogic - Play around with WebLogic Maven Plug-In. Thanks for sharing all the additional WebLogic articles within the community: How to use NodeManager to control WebLogic Servers & Retrieving WebLogic Server Name and Port in ADF Application & Glassfish to WebLogic Migration & Advanced GPIO & Building Robots with Java Embedded & Quick & Dirty How-to Guide: Install GlassFish 4 on Raspberry Pi & New Release: Java Micro Edition (ME) 8. In our Development tool section Frank published Development - Performance and Tuning - Overview in the latest ADF Architecture TV channel. Many of our clients run forms applications, make sure you run it on WebLogic. Thanks for sharing all the additional development tool articles within the community: Using Oracle WebLogic 12c with NetBeans IDE & Consuming SOAP Service & Check Box Support in ADF Query & New release of the ADF EMG Audit Rules & Working with the Array Data Type in a Table & ADF client-side architecture - Select All & Book Review: NetBeans Platform for Beginners See you in Lisbon! To read the complete newsletter please visit http://tinyurl.com/WebLogicNewsMay2014 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• What are these errors when I try to "make" the driver of my wireless network?

  - by Tom Brito

  I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme file say to use the "make" command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >