Search Results

Search found 10550 results on 422 pages for 'syntax rules'.

Page 329/422 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Cisco ASA 5505 network route for static IP hosts

  - by TheCapn

  I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• IPTables Reroute SSH based on Connection string?

  - by senrabdet

  We are using a cloud server (Debian Squeeze) where public ports on a public IP route traffic to internal servers. We are looking for a way to use IPTables and ssh where based on some part of the ssh connection string (or something along these lines) iptables will reroute the ssh connection to the "right" internal server. This would allow us to use one common public port, and then re-route ssh connections to individual servers. So, for example we hope to do something like the following: user issues ssh connection (public key encryption) such as ssh -X -v -p xxx [email protected] but maybe adds something into the string for iptables to use iptables uses some part of that string or some means to re-route the connection to an internal server using something like iptables -t nat -A PREROUTING ! -s xxx.xxx.xxx.0/24 -m tcp -p tcp --dport $EXTPORT -j DNAT --to-destination $HOST:$INTPORT ....where $HOST is the internal ip of a server, $EXTPORT is the common public facing port and $INTPORT is the internal server port. It appears that the "string" aspect of iptables does not do what we want. We can currently route based on the IP table syntax we're using, but rely on having a separate public port for each server and are hoping to use one common public port and then re-route to specific internal servers based on some part of the ssh connection string or some other means. Any suggestions? Thanks!

  Read the article

• DNAT from localhost (127.0.0.1)

  - by pts

  I'd like to set up a TCP DNAT from 127.0.0.1, port 4242 to 11.22.33.44, port 5353 on Linux 3.x (currently 3.2.52, but I can upgrade if needed). It looks like the simple DNAT rule setup doesn't work, telnet 127.0.0.1 4242 hangs for a minute in Trying 127.0.0.1..., and then it times out. Maybe it's because the kernel is discarding the returning packets (e.g. SYN+ACK), because it considers them Martian. I don't need an explanation why the simple solution doesn't work, I need a solution, even if it's complicated (e.g. it involves creating may rules). I could set up a usual DNAT from another local IP address, outside the 127.0.0.0/8 network, but now I need 127.0.0.1 as the destination address. I know that I can set up a user-level port forwarding process, but now I need a solution which can be set up using iptables and doesn't need helper processes. I was googling for this for an hour. It was asked multiple times, but I couldn't find any working solutions. Also there are many questions about DNAT to 127.0.0.1, but I don't need that, I need the opposite.

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• Conditional formatting Excel 2007/2010: Highlight the first cell in the row that contains duplicate values?

  - by Nancy Prades

  I have a table with hundreds of columns and rows of data; each row and column have a header. For instance, column headers are ITEM, FILE1, FILE2, FILE3, etc. and row headers are AA, BB, CC, DD, and so on. Under conditional formatting, I used "Highlight Cells Rules" "Equal to", in order to highlight cells that have values equal to the value in another cell. In this case, my formula rule is: Rule: Cell Value = $A$1 Applies to: =$B$3:$G$8 When I input "X" into cell A1, Excel will highlight all of the cells that have a value equal to "X", in this case, the following cells are highlighted: B3, C5, G6, and E8. Here's my problem. The data that I am working with contains more than 100 columns and rows. I want to identify all of the ITEMS (AA, BB, CC, etc.) that contain the duplicate file "X". In order to do this I have to scroll right to left, and up and down. Here's my question. Is there a way to use conditional formatting to add an additional rule? I want to keep the current rule, but I also want the row header to be highlighted if any of the cells in that row contain a value equal to "x". In this case, I want AA, CC, DD, and FF to also be highlighted. Is this possible? I've spent days trying to figure this out - and no luck. Any help would be appreciated! :) Nancy A B C D E F G 1 X 2 ITEM FILE1 FILE2 FILE3 FILE4 FILE5 FILE 6 3 AA x t y u d w 4 BB r y a b k d 5 CC y x f u i g 6 DD t v b d f x 7 EE e w y s l n 8 FF w u n x e m

  Read the article

• Variable host IP address in iptables rule

  - by DrakeES

  I am running CentOS 6.4 with OpenVZ on my laptop. In order to provide Internet access for the VEs I have to apply the following rule on the laptop: iptables -t nat -A POSTROUTING -j SNAT --to-source <LAPTOP_IP> It works fine. However, I have to work in different places - office, home, partner's office etc. The IP of my laptop is different in those places, so have to alter the rule above each time I change place. I have created a workaround which basically determines the IP and applies the rule: #!/bin/bash IP=$(ifconfig | awk -F':' '/inet addr/&&!/127.0.0.1/{split($2,_," ");print _[1]}') iptables -t nat -A POSTROUTING -j SNAT --to-source $IP The workaround above works. I only still have to execute it manually. Perhaps I could make it a hook executing whenever my laptop obtains an IP address from DHCP - how can I do that? Also, I am just wondering if there is an elegant way of getting it done in the first place - iptables? Maybe there is a syntax allowing to specify "current hardware ip addres" in the rule?

  Read the article

• (squid): failed to find or read error text file.

  - by adam

  There is something in our ERR_NO_RELAY that is causing this error to be logged and for the squid process to fail on start up. I can't show you the exact content of the file but I can tell you It has several lines of JavaScript When we remove the JavaScript, the problem goes away. This same file does not cause any issues other 3 instances of squid that we have running internally. All instances of squid came from the same VM images so they should be the same. We are unable to reproduce this issue except on the one box and we are unable to debug more on this box right now because it is running in production. I know these files are interpreted so squid can replace certain values available in the session so it may be that a syntax error caused this issue. That does not explain why we cannot reproduce it on other (virtually the same) images. One difference is that the instance of squid that has the issue was under load when the issue occurred. Any suggestions/insight would be appreciated. thanks!

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

• Convert Public Folder to Shared Mailbox

  - by Lilienthal

  Due to a change in company policy, all existing Public Folders (PF) have to be phased out in favour of shared mailboxes. Unfortunately, they don't seem to have any procedures or guidelines for this migration and I can't find much online either. I've already migrated one of our public folders so far as a sort of test case. Because we still use Exchange 2003, we can't create real shared mailboxes as we would in 2007 or 2010 (With New-Mailbox -Shared ... in the Exchange Shell). Instead, I simply created a new account on the AD and assigned it a mailbox. I then set the PF's permissions to read-only to keep it in a consistent state and copied the entire folder to a local PST in Outlook 2010, from which the folder was in turn copied to the new mailbox. Permissions and Folder Visible were set for all users and the migration was successful. While this works, the whole procedure feels very hackish to me and not at all efficient. I'd welcome some input on automating or at least streamlining the process. Additionally, we are unsure of what to do with our mail-enabled Public Folders. Several of these are nested under other PFs, some of which are also mail-enabled. Preserving folder structure is a key requirement and this seems impossible at first glance. I've considered creating dummy accounts for all the email addresses from our mail-enabled PFs and then setting up automated rules to forward messages to a subfolder of the new shared mailboxes, but I am not familiar enough with Exchange to know if this is even possible. Further points of concern are the Calendars and Contact lists in our public folders. I suppose I'll be forced to create new mailboxes for every one of these we have as well, then set up share permissions for their Calendar and Contact items, but would be happy to be proven wrong.

  Read the article

• Combine multiple network interfaces to connect to a dedicated server

  - by Dženis Macanovic

  this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

  Read the article

• Different font SIZES in a Text Editor, based on Script(Alphabet) type (ie. per Unicode Code-Block)

  - by fred.bear

  Some non-Latin-based scripts(alphabets) have more detail in their glyphs than do the Latin-based-script equivalents, and typically need a larger font to give the same degree of legibility (resolution-wise). Sometimes, both script types need to be present in the same file. Notepad++ allows different font SIZES (and colour, etc) courtesy of syntax-highlighting. This allows me to display larger-fonted non-Latin-based script in a // BIG-FONT comment. Although this has been quite handy for me in some situations, it is quite limited. A Word Processor can handle this scenario, but I'm not interested in that. I want a nice simple(?) plain(?) Text Editor to do it... on a per script-type basis... eg. mixing Latin-1 and Devanagari (and Mandarin, and ... Such a thing may not exits, but Notepad++ has shown that a simple(?) plain(?) Text Editor is capable of it. Does anyone know of such a Text Editor? ...Q. Why not a Word Processor? ...A. Because GCC and Python don't like that format! but UTF-8 is fine.

  Read the article

• OpenVPN / iptables restrict some access

  - by RitonLaJoie

  I want to create an openvpn service on a dedicated server I have, for some friends so that they are able to play online games faster. Is there an easy way to restrict which traffic I allow them with iptables ? It seems iptable is not very easy to maintain and we can easily get kicked out of our own server. Rebooting on a rescue mode every time I would get kicked out because of bad iptable rules would just be a pain. As far as I understand, the tun interface would be providing the access. Which kind of rule in iptables would I have to implement to restrict their access to only 1 ip ? Also, I don't want this vpn to be the default gateway for all the traffic. I guess I should go with the option of pushing a route to the clients so that they connect to the IP of the game server through the VPN and use their regular routes through their ISP for all the other traffic ? As a side not, it seems Openvpn AS is not very robust. Is there some other (commercial is ok) product that would give me the same administration options through a web interface ? Is Webmin the only other solution ? Thanks !

  Read the article

• Strategy to isolate multiple nginx ssl apps with single domain via suburi's?

  - by icpu

  Warning: so far I have only learnt how to use nginx to serve apps with their own domain and server block. But I think its time to dive a little deeper. To mitigate the need for multiple SSL certificates or expensive wildcard certificates I would like to serve multiple apps (e.g. rails apps, php apps, node.js apps) from one nginx server_name. e.g. rooturl/railsapp rooturl/nodejsapp rooturl/phpshop rooturl/phpblog I am unsure on ideal strategy. Some examples I have seen and or thought about: Multiple location rules, this seems to cause conflicts between the individual app config requirements, e.g. differing rewrite and access requirements Isolated apps by backend internal port, is this possible? Each port routing to its own config? So config is isolated and can be bespoke to app requirements. Reverse proxy, I am little ignorant of how this works, is this what I need to research? is this actually 2 above? Help online seems to always proxy to another server e.g apache What is an effective way to isolate config requirements for apps served from a single domain via sub uris?

  Read the article

• How do you get linux to honor setuid directories?

  - by Takigama

  Some time ago while in a conversation in IRC, one user in a channel I was in suggested someone setuid a directory in order for it to inherit the userid on files to solve a problem someone else was having. At the time I spoke up and said "linux doesn't support setuid directories". After that, the person giving the advice showed me a pastebin (http://codepad.org/4In62f13) of his system honouring the setuid permission set on a directory. Just to explain, when i say "linux doesnt support setuid directories" what I mean is that you can go "chmod u+s directory" and it will set the bit on the directory. However, linux (as i understood it) ignores this bit (on directories). Try as I might, I just cant quite replicate that pastebin. Someone suggested to me once that it might be possible to emulate the behaviour with selinux - and playing around with rules, its possible to force a uid on a file, but not from a setuid directory permission (that I can see). Reading around on the internet has been fairly uninformative - most places claim "no, setuid on directories does not work with linux" with the occasional "it can be done under specific circumstances" (such as this: http://arstechnica.com/etc/linux/2003/linux.ars-12032003.html) I dont remember who the original person was, but the original system was a debian 6 system, and the filesystem it was running was xfs mounted with "default,acl". I've tried replicating that, but no luck so far (tried so far with various versions of debian, ubuntu, fedora and centos) Can anyone clue me in on what or how you get a system to honor setuid on a directory?

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

• htaccess rewriting all subdomains to subdirectories

  - by indorock

  I'm trying to build a catch-all for any subdomains (not captured by previous rewrite rules) for a certain domain, and serve a website from a subdirectory that resides in the same folder as the .htaccess file. I already have my vhosts.conf to send all unmapped requests to a "playground" folder, where I want to easily create new subdomains by simply adding a subfolder. So, my structure looks like this: /var/www/playground |-> /foo |-> /bar The .htacces living inside the /playground folder and /foo and /bar being seperate websites. I want http://foo.domain.com to point to /foo and http://bar.domain.com to /bar. Here is my .htaccess file: RewriteEngine On RewriteCond %{HTTP_HOST} ^([^.]+).domain.com$ [NC] RewriteCond %{REQUEST_URI} !^/%1/(.*) RewriteRule ^(.*) /%1/$1 [L] This is supposed to capture the subdomain, add it as a subfolder in RewriteRule, then append after the slash and path information. The second RewriteCond is there to prevent an infinite loop. My idea was that %1 in the second RewriteCond would be able to capture the capture group in the first RewriteCond. But so far I haven't had any success, it's always ending up in a redirect loop. If I would replace %1 in the second RewriteCond with hardcoded 'foo' or 'bar', it works, which leads me to believe that you cannot refer to a capture group inside a RewriteCond. Is is true? Or am I missing something?

  Read the article

• mod_rewrite and Apache questions

  - by John

  We have an interesting situation in relation to some help desk software that we are trying to setup. This is a web based software application that allows customers and staff to log into it and access tickets and supply updates, etc. The challenge we are having deals with the two different domains that we use and the mod_rewrite rules to make it all work with our SSL certificate that is only bound to one of the domains. I will list the use case scenarios below and the challenges that we are having. If you access http://support.domain1.com/support then it redirects fine to https://support.domain2.com/support If you access http://support.domain2.com/support then it redirects fine to https://support.domain2.com/support If you access https://support.domain1.com/support then it throws an error of "server cannot be found" If you access https://support.domain1.com/support/ after having visited https://support.domain2.com/support then you are presented with a "this connection is untrusted" error about the certificate only being valid for the domain2 domain instead of the domain1 domain name I have tried just about every mod_rewrite rule that I can think of to help make this work and I have not been able to locate the correct combination. I was curious if anyone had some ideas on how to make the redirects work correctly. In the end, we are needing all customers and staff to land at https://support.domain2.com/support regardless of the previous URL combinations that they enter, like listed above. Thanks in advance for your help with this.

  Read the article

• Set document root for external subdomain (A Record) via htaccess

  - by 1nsane

  I have a managed server (unable to control apache settings) with the default document root of: /var/www I have a web app running in: /var/www/subdomains/app/webroot I have a dedicated domain managed by the host that has the aforementioned webroot which works perfectly. I would like to allow externally provisioned domains to point to the server/web app via A Record config. If I access the site via IP, it takes me to the index located in /var/www. I would like to configure the .htaccess in my /var/www directory to rewrite requests from the external subdomain to the /var/www/subdomains/app/webroot directory. I've done so using the following rules: RewriteCond %{HTTP_HOST} external\.domain\.com$ [NC] RewriteRule ^(.*)$ /var/www/subdomains/app/webroot/index.php?url=$1 [L,QSA] When accessing external.domain.com, the app loads properly, but the paths to things like CSS files, images, etc. are prefixed with "/subdomains/app/", causing broken links. I've tried changing the RewriteBase (both in /var/www and /var/www/subdomains/app/webroot), as I believe that's what it's designed for - but no luck. Any ideas? FYI the app is built on CakePHP. Thanks

  Read the article

• Load balance to proxies

  - by LoveRight

  I have installed several proxy programs whose IP addresses are, for example, 127.0.0.1:8580(use http), 127.0.0.1:9050(use socks5). You may regrard them as Tor and its alternatives. You know, certain proxy programs are faster than others at times, while at other times, they would be slower. The Firefox add-in, AutoProxy and FoxyProxy Standard, can define a list of rules such as any urls matching the pattern *.google.com should be proxied to 127.0.0.1:8580 using socks5 protocol. But the rule is "static". I want *.google.com to be proxied to the fastest proxy, no matter which one. I think that is kind of load balancing. I thought I could set a rule that direct request of *.google.com to the address the load balancer listens, and the load balancer forwards the request to the fastest real proxy. I notice that tor uses socks5 protocol and some other applications use http. I feel confused that which protocol should the load balancer use. I also start to wonder about the feasibility of this solution. Any suggestions? My operating system is Windows 7 x64.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Changing the name of a binary packaged application and its evoking command

  - by jerkstore

  I have taken the source code of a large project, App A, and made many modifications to it to produce my version, App B. Both App A and App B compile cleanly on Debian and Red Hat and now I would like to build binary packages for both platforms. The last modification I need to make is ensuring App B can be installed alongside App A without any interference. I should be able to evoke both application-a and application-b in the terminal and have both be listed as separate software in whatever desktop environment is present. The projects have a debian/ folder (containing rules, control, etc.) and an rpm/ folder containing a SPEC file. Currently, building and installing the .rpm and .deb packages works except that App B is recognized as App A and therefore does not meet the aforementioned requirements. ldd shows the programs have the same exact dependencies and I am not able to pursue static linking of libraries. What modifications do I need to make to my project to achieve the desired outcome? Please be specific as I do not have much experience with the packaging process.

  Read the article

• how to remove location block from $uri in nginx configuration?

  - by Jason

  I have a rewrite in my ngix conf file that works properly except it seems to include the location block as part of the $uri variable. I only want the path after the location block. My current config code is: location /cargo { try_files $uri $uri/ /cargo/index.php?_REWRITE_COMMAND=$uri&args; } Using an example url of http://localhost/cargo/testpage the redirect works, however the value of the "_REWRITE_COMMAND" parameter received by my php file is "/cargo/testpage". I need to strip off the location block and just have "testpage" as the $uri I am pretty sure there is a regex syntax to split the $uri and assign it to a new variable using $1 $2 etc, but I can't find any example to do just a variable assignment using a regex that is not part of a rewrite statement. I've been looking and trying for hours and I just can't seem to get past this last step. I also know I could just strip this out on the application code, but the reason I want to try to fix it in the nginx conf is for compatibility reasons as it also runs on Apache. I also should say that I have figured out a really hacky way to do it, but it involves an "if" statement to check for file existance and the documentation specifically says not to do it that way. -- UPDATE: ANSWERED BY theuni: The regex goes in the location block definition. one note of caution is that php handler location needs to be ABOVE this location, otherwise you will get a server error because it goes into an infinite redirect loop location ~ ^/cargo/(.*) { try_files $1 /cargo/$1/ /cargo/index.php?_REWRITE_COMMAND=$1&args; }

  Read the article

• Redirect traffic from 127.0.0.1 to 127.0.0.1 on port 53 to port 5300 with iptables

  - by Zagorax

  I'm running a local dns server on port 5300 to develop a software. I need my machine to use that dns but I wasn't able to tell /etc/resolv.conf to check on a different port. I searched a bit on google and I didn't find a solution. I set 127.0.0.1 as nameserver on /etc/resolv.conf. This is my whole /etc/resolv.conf: nameserver 127.0.0.1 Could you please tell me how can I redirect outbound traffic on port 53 to another port? I tried the following but it didn't work: iptables -t nat -A PREROUTING -p tcp --dport 53 -j DNAT --to 127.0.0.1:5300 iptables -t nat -A PREROUTING -p udp --dport 53 -j DNAT --to 127.0.0.1:5300 Here is the output of iptables -t nat -L -v -n (with suggested rules): Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 redir ports 5300 0 0 REDIRECT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 redir ports 5300 Chain POSTROUTING (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination

  Read the article

• ip6tables blocking output traffic

  - by jmccrohan

  My OpenVZ VPS is blocking outbound IPv6 traffic, but correctly filtering inbound IPv6 traffic. Below is my ip6tables-restore script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 51413 -j ACCEPT -A INPUT -p udp -m udp --dport 51413 -j ACCEPT -A INPUT -m limit --limit 5/min -A INPUT -j REJECT --reject-with icmp6-adm-prohibited -A FORWARD -j ACCEPT -A OUTPUT -j ACCEPT COMMIT ICMPv6 traffic is still able to pass both inbound and outbound. When I flush these rules using -F, outbound traffic flows fine. What am I missing here? EDIT: It appears that ip6tables is marking ESTABLISHED packets as INVALID. Consequently, the outbound traffic is NOT actually being blocked. The reply packets are not allowed inbound again, hence appearing like blocked outbound traffic. Allowing INVALID packets inbound solves the outbound issue, but also renders the inbound filter useless.

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >