Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 33/306 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Copy from CDROM is very slow in Ubuntu

    - by ???
    I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

    Read the article

  • Virtualbox will run from 32bit installation CD but not 64bit.

    - by MetaDark
    I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

    Read the article

  • When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

    - by Jessica K
    I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

    Read the article

  • Is it possible to use the Raring install image as a package repo (like the old alternate CD)?

    - by jamadagni
    I use Kubuntu and recently upgraded to Raring directly from Precise. Until Precise, I always installed the OS using the alternate CD and not the desktop CD, because I could later on mount the image and use it as an offline package repo. For instance if I remove a package installed by the default installer and later I want to install it again, I can just install it from the ISO without needing to download it again. However, since Quantal the alternate CD no longer exists, so I am not sure how to set up the installed image as a local repo. I mean, doing find . -name "*.deb" inside the ISO tree after loopmounting it only shows a few packages like libc6 gcc and such and not the full set of packages that are actually installed -- I presume they are included in pre-installed form inside casper/filesystem.squashfs. Given this situation, is it or is it not possible to use the Raring install images as offline repos? If yes, how? Thank you!

    Read the article

  • Caspol, VMs, Mapped Drives, VS2010

    - by Simon Woods
    Hi I have a VM (Win7 32 bit) with VS2010 installed. I have a drive mapped into it from the host machine (VM 64 bit), when I have some of my VS2010 projects and to where I am building them. One of my projects is looking to load an assembly. If I copy that assembly to a local drive, the program ruins fine. If I leave it on the mapped drive, then I get an error Exception is: FileLoadException - Could not load file or assembly 'file:///Z:\BusinessTier\bin\Debug\BusinessTier.dll I am unsure whether or not I need to run Caspol. There is another post on SO which pointed me to a post which indicated that VS2008 SP1+ removed the need for caspol wrt network drives, but I wondered if I still needed to because I am in a VM. I have tried running the following on the host machine in an attempt to give permissions to VS inside the VM, but to no avail C:\Windows\Microsoft.NET\Framework\v4.0.30128>caspol -m -ag 1.2 -url file://g:\* FullTrust where g:* is the drive being mapped into the VM (as drive z:) What am I missing (apart from understanding!) Thx Simon

    Read the article

  • svn working copy spanning 2 physical drives?

    - by ronenosity
    I have a large repository hosted on dreamhost that I backup daily on a remote machine using a windows scheduled task which updates the working copy located on an external USB 300GB drive connected to the remote machine. The 300GB drive is nearly full with only 26GB of free space remaining. Recently I added a second USB external 1TB drive to increase storage capacity. I would like to ask: what is the best way to use the new 1TB drive? Is it possible to span the working copy across both drives (ex: somehow create a 1.3 TB drive)? If I copied the working copy from the 300GB to the 1TB would svn continue form do I need to retarget the update working copy script to the new 1TB drive and start downloading everything again (least desired option) thanks

    Read the article

  • Storage drives is causting system crash

    - by Chad
    I'm running Centos 5.4 with 750GB(ntfs) and 2TB drives for storage. Originally I installed the 750, everything seemed fine and then I installed the 2TB drive with NTFS already partitioned. I noticed when I would copy a lot of videos it would crash (no mouse or response from server) about 20min into it. After doing some troubleshooting I noticed the 750 would also crash when doing the same task so I decided that NTFS may be the problem. I unmounted the 2TB drive and tried to partition and format it using ext2 but when using parted it would crash at this point "writing inode tables". Looking at the dmesg logs I believe this is the error "mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining". Any idea as to what could be causing this?

    Read the article

  • Creating a CD auto-start dialog

    - by emilyshaun
    For me, compact discs and these customized auto-start dialogs are somewhat outdated and waste... However, I have to create such a dialog as an index for a CD consisting of a few PDF files. Making one to work on Microsoft Windows is quite easy. As there might be users from different platforms (Unix, Apple,...), the question raises how to offer them such a (auto-starting) dialog as well. Java is of course an option, but I think it's overloaded and naturally too slow for this purpose. Now, I think of a single webpage that will appear in the local browser. Using all these web standards this could a very creative, light-weight approach working on most systems. Do you see any problems that might occur here? Probably, there is a different and more elegant solution to this issue?

    Read the article

  • How can ShadowProtect SBS backup to alternating external drives?

    - by detly
    I am trying to configure ShadowProtect SBS (v. 4.1.5.10129) in Windows Server 2003 SBS to backup my server hard drives to two alternating external drives. What I want is to be able to swap one drive for another every Friday, and have ShadowProtect continue on the same schedule. Ideally, this would require absolutely no user interaction whatsoever, apart from physically unplugging one drive and reconnecting the other. The trouble is, Windows Server 2003 does not allow you to assign the same drive letter to two different devices. So if I plug in drive #1 and assign it drive letter "X:", the next week when I unplug it and plug in drive #2, it gets some other letter. But since ShadowProtect is set to backup to "X:\", it can't find it and the backup fails. The drives are Samsung STORY Station 3.0 2TB drives. How can I configure things so I can just swap the drives over every week and not worry about having to reconfigure drive letters every time?

    Read the article

  • Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

    - by Ray Nathan
    I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

    Read the article

  • How to set default permissions for automounted FAT drives in Ubuntu 9.10?

    - by piman
    I've got many FAT32 drives that I'd like to mount in Ubuntu such that they have permission mode 700 for directories and 600 for all other files. By default, they have 755 for all files, which is not particularly useful since almost no non-directories should be executable, and it screws up version control repos hosted on the drives. "Back in the day" I would have had the drives listed in /etc/fstab with the umask/dmask I want and there was no such thing as a default. These days, drives automount under their volume names. Which is great, except now I have no idea how to set the default. I have tried changing the /system/storage/default_options/vfat/mount_options gconf key with no apparently effect. It was 077 initially but the mounted drive reflected a default of 022; changing it and re-inserting the drives resulted in the files still having permission bits of 755.

    Read the article

  • Different versions of 2.5" drives? Unscreawing Intel 320 for slimmer drive to fit newer thinkpads?

    - by hhh
    My x60s laptops come with about 1-2mm heigher 2.5" HDD than newer x220 models. This is totally stupid when one would like to reuse the old drive in the newer laptops. I bought newer 2.5" 320 Intel SSDs and they seem to have such 1-2mm gap to unscrew but I am unsure whether it is meant for opening. Could someone instruct what to do here? Look the manufacturer has started changing the old good 2.5" drives into slightly different versions, now it means slow compability issues to fix or totally new 2.5" drives. Ideas how to proceed? Unscrewing newer 320 drives or are some other versions of 2.5" drives meant for x220? Does there exist some sort of racks to get drives working between different comps? Perhaps booting from laplink is currently the easiest solution to get things working when changing harddrives between comps? Perhaps related http://www.zdnet.com/blog/hardware/seagate-announced-super-slim-25in-momentus-thin-hard-drive/6439

    Read the article

  • Where can I get Windows XP Home Edition, when I lost the CD? [closed]

    - by Kugel
    Possible Duplicates: How can I reinstall windows without a CD/DVD? Installing Windows Vista without system restore CD with OEM key (ie: from underside of my laptop) I came home for Christmas and there is this old notebook that my dad likes to use. I has a sticker with CD-key for Windows XP Home Edition. However the CD is long lost. I'd like to reinstall the system. Is there a way to obtain the CD? Thanks.

    Read the article

  • Putting two physical hard drives in a single 2.5" bay?

    - by dgw
    My crazy brain came up with this ridiculous idea. "Why can't I have a single 2.5" drive device that actually contains two independent hard drives? I want RAID 1 data mirroring and the security of having redundant drives. This is a thing that must exist!" To be clear, I am not asking if I can somehow shoehorn two 2.5" drives into a single bay, replace an optical drive with an additional HDD, or anything like that. What I have in mind is a single 2.5"-form-factor device that houses two independent hard drives, with separate housings (likely) and distinct controllers. Probably all they'd need to share is the power & SATA connections. Probably no such thing exists, but because I know there exist hard drives the physical size of a stack of postage stamps (roughly), I have to ask.

    Read the article

  • Our Flash Streaming Player Occasionally Stutters like a Skipping CD after a Period of Time

    - by Jonathan Fritz
    We offer a streaming player for a number of our clients, who are responsible for their providing us with their own audio streams. We have written a very simple flash player that can play all of the streams that we support (icecast/shoutcast/live365/mp3 over http/etc). Unfortunately, we have found that when listening, our player sometimes begins to stutter (like a skipping cd), sometimes after only 10 minutes, and sometimes after an hour of listening. We have noticed this behaviour in firefox on both linux and windows. Does anybody know anything about this problem? We know that flash isn't ideal for infinite streams of audio, but it's about all that we can find that's on every platform out there. If anybody can suggest a solution to our problem, I'll be your friend forever. Here is a link to the live player: http://cr-jf.jfritz.02.dev.wecreate.com/streaming/player_v5/ Note that you'll need to test in a browser that isn't IE, because we use WMP in IE, and that the JavaScript on the page will cause the player to unload and re-load once an hour because of memory issues. Because I can only put one hyperlink in a post, I'll add a link to the player source code as a comment. Thanks all!

    Read the article

  • How to display label of unnamed drive ?

    - by iira
    I want to get the name or label of drive. I use this function : function GetVolumeLabel(DriveChar: Char): string; var NotUsed: DWORD; VolumeFlags: DWORD; VolumeInfo: array[0..MAX_PATH] of Char; VolumeSerialNumber: DWORD; Buf: array [0..MAX_PATH] of Char; begin GetVolumeInformation(PChar(DriveChar + ':\'), Buf, SizeOf(VolumeInfo), @VolumeSerialNumber, NotUsed, VolumeFlags, nil, 0); SetString(Result, Buf, StrLen(Buf)); { Set return result } Result:=AnsiUpperCase(Result) end; For example, here're my drives in Windows Explorer : Local Disk (C:) Data (D:) DVD RW Drive (E:) The output of the code : C: D: DATA E: The labels of C and E are empty. What winapi/function should I use to display the label of unnamed drive (C and E)?

    Read the article

  • How do I mount a .iso or .dmg image as a CD on a Mac so that it's recognised as a CD and not just a volume?

    - by despicable
    I have a knackered super-drive, and need to install software from a CD. However I do have backup images (as .dmg's) of all my install disks. Usually it all works fine, but with two particular installs it tells me to insert the CD into the drive. Is there anyway to fool the system into mounting the .dmg and make it look like a CD? I believe that Toast can do this, so it's possible. I was just hoping to be able to do it without forking out £80 - I could get an external drive for that (just not right this second)

    Read the article

  • How can I set the CD audio volume in Linux?

    - by user1296362
    In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

    Read the article

  • Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

    - by user56365
    I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

    Read the article

  • How to boot Linux from a 16gb USB flash drive

    - by Chris Harris
    I'm trying to install Linux on a single partition of a USB flash drive that's larger than 4gb. The first place I went to is http://pendrivelinux.com. I can follow these instructions for installing Xubuntu 9.04 perfectly, which unfortunately break down when I try to scale it up beyond 4gb. There are several other tools to do this (unetbootin and usb-creator) which follow a very similar formula. I figured out that a big problem of mine was that all of these tools assume the USB drive is formatted in FAT32, which unfortunately cannot hold a single file larger than 4gb. This is unfortunate because I want to use just one partition, so that my persistance file, casper-rw, looks like one big partition to the OS once I've booted off of the USB drive. I then tried following a myriad of instructions involving formatting the drive as one large ext2 filesystem and using extlinux to create a single bootable ext2 file system. This doesn't work for me however, after about 20 attempts verifying and slightly tweaking the formula, I cannot seem to get a "good" bootable ext2 file system built. I'm not entirely sure what's going on, but it seems as though no matter how hard I try, I cannot get the ext2 file system to remain coherent after copying the Linux ISO contents over, copying the MBR, and executing extlinux to create the ext bootloader. Every time, after I follow these steps (in any order) and reboot, I get an unbootable USB drive. If I then mount the drive under Linux again, I see a mess of a file system (inodes have clearly been screwed up somewhere along the way). I suspected that the USB drive wasn't being fully flushed, so I tried using the "sync" and "unmount" commands before rebooting which didn't affect things at all. I guess I have several possible questions - but let's start with the obvious - is there something I'm missing to create a bootable ext2 USB flash drive that's large (e.g. 16gb)?

    Read the article

  • DVD-RW Drive not recognizing a DVD+R disc

    - by unknown (yahoo)
    Hi everyone, I am having trouble burning DVD+R disc's. My OS is vista and i have used this burner and these same discs in the past. I haven't had the need to do so in months and now that i come back to create some backups my DVD/RW drive doesn't recognize a brand new DVD+R disc. These disc are the same ones i have used in the past(Same Pack even). Anyone have any idea what this might be. Maybe a vista upgrade or something that i downloaded in the last few months that could have thrown something off? Thanks in advance.

    Read the article

  • Fedora 15 liveCD for most common wireless and wired network interfaces [closed]

    - by user800133
    I've created a Fedora 15 liveCD that is customized for my application. On the first laptop I tried, it didn't have the driver for the Broadcom BCM43224 wireless network interface. This software will be used on a wide variety of laptops. Is there are reasonable way to add drivers for the all most common wireless and wired network interfaces available today? If it's not much trouble I'd also like to add support for the common 3G/4G USB dongles.

    Read the article

  • Have you ever used kon-boot?

    - by Ctrl Alt D-1337
    Has anyone here ever used kon-boot? I guess it may work because of the few blog posts about it but I feel kinda concerned and am interested at hearing experiences from anyone who have used multiple times with no side effects. I am slightly worried for any direct memory altering it tries to do. I am also worried if this will do its job fine to hide the fact it puts in a low level trojan or if the author planned to do anything like that in a future release as it looks like closed source from the site. Also I don't intend to gain illegal access but I find these sort of things very useful for my box of live discs I take every where, just in case. OT: Other question that me be of interest to readers here

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >