Search Results

Search found 1425 results on 57 pages for 'cisco catalyst'.

Page 33/57 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Why won't my graphics work in Ubuntu 12.04 LTS?

    - by user170974
    I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

    Read the article

  • Using two ports on my ZyXel USG gateway to patch two devices together?

    - by Matthew Beza
    I don't know if this is possible but it would save me many long drives! I have drawn, with my epic MS Paint skills, my current setup. I have a ZyXel USG300 Gateway with a built in 5 port switch. It supports bridging, tunnles, VLANs, etc.. I have a Cisco WLC2112 plugged into port 6 (P6). The cisco is set to 192.168.6.2 and P6 is set to 192.168.6.1. This works but I need to incorporate a Nomadix AG3000 to handle guests. (Router (A) in the picture). So I need the Cisco WLC2112 to use the Nomadix as if it where plugged into it's LAN port. Right now the Nomadix WAN Port is plugged into (P2) on the ZyXel, and the Nomadix LAN port is plugged into (P3). Is it possible to set something up where (P3) and (P6) are somehow "Patched" as if the Cisco was plugged directly into the Nomadix LAN port? Basically making the ZyXel a fancy Cat5e coupler?

    Read the article

  • How to play WAV file through Network Paging Interface

    - by BGM
    In our building we have a Viking Paging ZPI-4 Interface for our intercom. The interface receives data from our Asterisk Phone system via a Cisco SPA112 Port Adapter which has it's own IP address on the network and converts digital into analog. Asterisk plays the "5" tone and then allows the user's voice to commence over the connection. Now, what I want to do is to play a wav file over this Viking Paging device using the Cisco Port Adapter. I know how to get Asterisk to do it, but I want to do this without Asterisk. I want some kind of program that can talk to the Cisco Port Adapter and then transmit the wav file into the Viking Paging Device. What kind of program do I need to get or make? Now, I found this link if it helps anyone with ideas. I also found this information, but I'm not sure how to apply it. I also found this, but it involves an arduino. However, I already have the analog-to-digital convertor, and the Viking will handle sending sound over the paging speakers. I just need to know how to send the wav file to the Viking via the Port Adapter. So far, I know my wav file should be formatted as 8bit mono, and I need to send the "5" tone to open the Viking Pager's channel. [update] I am trying to figure out if I can use VLC player to stream to the ipaddress of the Port Adapter. So far I'm not having success with that, and don't even know if it will work. Windows Media Player has a streaming option too. I am thinking that since the Cisco Port Adapter thinks it is a sort of phone, that the only way this can be done is via SIP.

    Read the article

  • Reliable router with good VPN and WAN Throughput [closed]

    - by Asdande
    I have 2 cisco rv180 VPN router. These routers are giving me lots of problems. The webpages wont load correctly, slow response to load webpages plus other many issues. I have several cases pending with cisco. I give up on these routers. I would like to know if you guys can recommend me a reliable router for our 3 branches (NY - main, SC and FL). In NY- main office, we have 55 users. In SC branch, 6 users. In Florida we only have 1 (will grow soon). I need a router capable of support: 3 VPNs Site-to-Site connection VPN throughput of at least 40-50 Mbps WAN throughput at least 100 Mpbs and up PPTP Server for at least 5 PPTP users Web filtering - all users need access to internet Good Firewall Port forwarding for FTP Server - able to show the public IPs of FTP users (rv180 cannot do that, just shows me router's LAN interface IP, opened a case with cisco, now escaleted to level 2, still no answer or workaround) Dual WAN ports for balance or backup internet. Gigabit WAN/LAN ports Price between $400-$500 range. I was thinking on the TP-LINK TL-ER6120 or TL-ER6020 according to the review on smallnetbuilder.com http://www.smallnetbuilder.com/lanwan/lanwan-reviews/31983-tp-link-tl-er6020-safestream-gigabit-dual-wan-vpn-router-reviewed but I don't want to make another mistake as I did when I bought the cisco RV180. Thank you in advance,

    Read the article

  • How to remove the “AMD Testing use only” watermark from Ubuntu 12.10

    - by Lucio
    I've installed the latest catalyst driver (beta) following the step in this guide for Ubuntu Quantal Quetzal. My system is 64 bit and my graphic card is an ATI RadeonHD 6670, this g.c. is Officially Supported (Catalyst & Open Source), you can confirm that from this AMD Linux Community thread. I don't have any problem, except the AMD testing use only watermark. I see the following frame in any stage into the OS (logged, unlloged, etc.) except in the terminals. I found different versions of how to remove this image, but this change according to the system, so I want an answer from this popular (trusted) site. How to solve this issue in Ubuntu 12.10 32b? This procedure is different in a 64b system?

    Read the article

  • The videocard driver killed Unity

    - by iUngi
    Hy, I just installed the ubuntu 11.04. After I restarted the PC I got a little notification that some drivers are missing, I click to activate the driver. So after the activation I can't use the unity. When in the preference page I click to the Ati catalyst control center I get the following error: There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig. My video card is ATI so I don't know what is the problem!?!

    Read the article

  • 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

    - by user12889
    I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

    Read the article

  • Two Router issue, cannot reach internet

    - by DeBuGGeR
    I have on ADSL router and one CISCO Wifi Router. The ADSL Router is working fine on its own. I am connecting the lan port of the ADSL Router to the internet(RJ45) port of my Cisco wifi router. But I cannot access the internet from the Cisco router, neither through wifi nor through ethernet connection. The IP of ADSL router is 192.168.1.1 and the ip of my Wifi router is 192.168.1.100. Should I connect to the LAN port of my Wifi router rather than using the ethernet port(Marked as Internet)?

    Read the article

  • VPN Network intermittantly fails to provide internet: What could be possible causes

    - by Jake M
    We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

    Read the article

  • Logical and Physical network topologies

    - by t.thielemans
    I'm trying to understand the difference between logical and physical topologies but it's a bit confusing to me. Cisco states these as logical topologies, but from my understanding these should be physical topologies? This is what I understand so far: Physical PtP: desktop directly connected to a desktop Multiaccess: several desktops connected to a medium with access to each other (Cisco Ring image, how should I view this in a live situation?) Ring: several desktops directly connected to each other creating a loop? Logical PtP: two desktops (virtually) connected to each other with intermediairy devices in between MultiAccess: (don't have a clue) Ring: (don't have a clue) Could anyone help me out and perhaps explain the difference a bit more detailed? Online I can't find any useful topics. I am using the Cisco Network Fundamentals book.

    Read the article

  • 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

    - by user12889
    I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

    Read the article

  • The latest Oracle Social Network News from Open World

    - by me
    Highlights Oracle and Partners showcase the latest development around  Oracle Social Network  (OSN) Integration of OSN Social Fabric into Business Applications like Finance, HCM and Customer Experience Partners like Cisco WebEx, Avaya, Weemo, Lingotek and HarQen showcase OSN integration Oracle shares details around internal OSN deployment Please visit us at 2413 Moscone South  Exhibition Hall  and  experience a live OSN demo Social Fabric  Oracle Social Network socializes your Applications, Process and Content within your Enterprise. Here are some examples what is shown at Oracle Open World. Socialize the Finance department Enable Finance departments to collaborate instantly during quarter close with real-time information access Enable finance professionals in the back office to easily interact with the rest of the company Provide privacy when discussing sensitive financial results within Conversations  Socialize Human Capital Management (HCM) Promotes attainable performance goals that achieve the business objectives of the enterprise Capture expertise across the network Continuous feedback loop provided that results in productivity and innovation improvement tied to higher employee engagement OSN and Customer Experience Find the person with the best skills to assist with the issue Real-time collaboration in  context of the issue Track an Agent’s collaboration contributions Identify and contribute relevant knowledge back to the system Cisco/Webex integration The Web Conferencing tool of your choice can be integrated with OSN. In the example below you can see the integration of the Cisco WebEx solution into OSN. and sure - this works on mobile devices as well  OSN @ Oracle Oracle has deployed OSN as part of the internal Fusion CRM application rollout. After just 4 month we can see impressive usage patterns.

    Read the article

  • Driver issue for 7850 HD Diamond Windows 7

    - by Mr.Student
    I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

    Read the article

  • Sun Fire X4800 M2 Posts World Record x86 SPECjEnterprise2010 Result

    - by Brian
    Oracle's Sun Fire X4800 M2 using the Intel Xeon E7-8870 processor and Sun Fire X4470 M2 using the Intel Xeon E7-4870 processor, produced a world record single application server SPECjEnterprise2010 benchmark result of 27,150.05 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server ran the application tier and the Sun Fire X4470 M2 server was used for the database tier. The Sun Fire X4800 M2 server demonstrated 63% better performance compared to IBM P780 server result of 16,646.34 SPECjEnterprise2010 EjOPS. The Sun Fire X4800 M2 server demonstrated 4% better performance than the Cisco UCS B440 M2 result, both results used the same number of processors. This result used Oracle WebLogic Server 12c, Java HotSpot(TM) 64-Bit Server 1.7.0_02, and Oracle Database 11g. This result was produced using Oracle Linux. Performance Landscape Complete benchmark results are at the SPEC website, SPECjEnterprise2010 Results. The table below compares against the best results from IBM and Cisco. SPECjEnterprise2010 Performance Chart as of 3/12/2012 Submitter EjOPS* Application Server Database Server Oracle 27,150.05 1x Sun Fire X4800 M2 8x 2.4 GHz Intel Xeon E7-8870 Oracle WebLogic 12c 1x Sun Fire X4470 M2 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) Cisco 26,118.67 2x UCS B440 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle WebLogic 11g (10.3.5) 1x UCS C460 M2 Blade Server 4x 2.4 GHz Intel Xeon E7-4870 Oracle Database 11g (11.2.0.2) IBM 16,646.34 1x IBM Power 780 8x 3.86 GHz POWER 7 WebSphere Application Server V7 1x IBM Power 750 Express 4x 3.55 GHz POWER 7 IBM DB2 9.7 Workgroup Server Edition FP3a * SPECjEnterprise2010 EjOPS, bigger is better. Configuration Summary Application Server: 1 x Sun Fire X4800 M2 8 x 2.4 GHz Intel Xeon processor E7-8870 256 GB memory 4 x 10 GbE NIC 2 x FC HBA Oracle Linux 5 Update 6 Oracle WebLogic Server 11g Release 1 (10.3.5) Java HotSpot(TM) 64-Bit Server VM on Linux, version 1.7.0_02 (Java SE 7 Update 2) Database Server: 1 x Sun Fire X4470 M2 4 x 2.4 GHz Intel Xeon E7-4870 512 GB memory 4 x 10 GbE NIC 2 x FC HBA 2 x Sun StorageTek 2540 M2 4 x Sun Fire X4270 M2 4 x Sun Storage F5100 Flash Array Oracle Linux 5 Update 6 Oracle Database 11g Enterprise Edition Release 11.2.0.2 Benchmark Description SPECjEnterprise2010 is the third generation of the SPEC organization's J2EE end-to-end industry standard benchmark application. The SPECjEnterprise2010 benchmark has been designed and developed to cover the Java EE 5 specification's significantly expanded and simplified programming model, highlighting the major features used by developers in the industry today. This provides a real world workload driving the Application Server's implementation of the Java EE specification to its maximum potential and allowing maximum stressing of the underlying hardware and software systems. The workload consists of an end to end web based order processing domain, an RMI and Web Services driven manufacturing domain and a supply chain model utilizing document based Web Services. The application is a collection of Java classes, Java Servlets, Java Server Pages, Enterprise Java Beans, Java Persistence Entities (pojo's) and Message Driven Beans. The SPECjEnterprise2010 benchmark heavily exercises all parts of the underlying infrastructure that make up the application environment, including hardware, JVM software, database software, JDBC drivers, and the system network. The primary metric of the SPECjEnterprise2010 benchmark is jEnterprise Operations Per Second ("SPECjEnterprise2010 EjOPS"). This metric is calculated by adding the metrics of the Dealership Management Application in the Dealer Domain and the Manufacturing Application in the Manufacturing Domain. There is no price/performance metric in this benchmark. Key Points and Best Practices Sixteen Oracle WebLogic server instances were started using numactl, binding 2 instances per chip. Eight Oracle database listener processes were started, binding 2 instances per chip using taskset. Additional tuning information is in the report at http://spec.org. See Also Oracle Press Release -- SPECjEnterprise2010 Results Page Sun Fire X4800 M2 Server oracle.com OTN Sun Fire X4270 M2 Server oracle.com OTN Sun Storage 2540-M2 Array oracle.com OTN Oracle Linux oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN WebLogic Suite oracle.com OTN Disclosure Statement SPEC and the benchmark name SPECjEnterprise are registered trademarks of the Standard Performance Evaluation Corporation. Sun Fire X4800 M2, 27,150.05 SPECjEnterprise2010 EjOPS; IBM Power 780, 16,646.34 SPECjEnterprise2010 EjOPS; Cisco UCS B440 M2, 26,118.67 SPECjEnterprise2010 EjOPS. Results from www.spec.org as of 3/27/2012.

    Read the article

  • Home and Small to Medium Enterprise network manufacturer choice, Netgear, Linksys or D-Link ?

    - by Kedare
    (Please don't close this post, it's a serious post so... Be cool, no trolls please, I need an answer ;p) Hello, I am looking for an alternative to Cisco (too expensive for me !) for semi-pro utilization (at home but with advanced feature (I'm studying in IT)) and in small/medium enterprises. I think I will choose between LinkSys (Including Cisco Small Business), Netgear and D-Link, but I've never really used these products, that what I need is a manufacturer that make "almost" all type of networking equipment (Like Cisco but cheaper..), here are my needs : I need almost all my products to be rackable I need a good warranty (Netgear lifetime waranty rulez!) I need an "unified" network environment I made a little comparison of the characteristics that interest me after hours of search on Internet (based on result found on many websites): (Prices are based on the ldlc-pro.com french website) Hotline/Support Quality: Netgear : Not so bad Linksys : Not so bad D-Link : Poor! Most common Warranty: Netgear : Unlimited Lifetime Warranty! Linksys : Limited 3 years warranty D-Link : Limited 5 years warranty (Unlimited in US but I'm on France :(...) VPN protocols compatibles with routers on endpoint mode: Netgear : Only IPSEC :( Linksys : IPSEC, PPTP, L2TP D-Link : IPSEC, PPTP, L2TP Cheaper 8 ports Gb switch : Netgear : 30€ Linksys : 47€ D-Link : 30€ Cheaper 48 ports + 1Gb uplink(s) administrable switch : Netgear : 263€ Linksys : 630€ D-Link : 600€ Cheaper VPN router : Netgear : 100€ Linksys : 80€ D-Link : 60€ Cheaper rackable switch : Netgear : 50€ Linksys : 87€ D-Link : 50€ Cheaper rackable and administrable switch : Netgear : 120€ Linksys : 370€ D-Link : 171€ Netgear and D-Link are in the same range of price, where Linksys is more expensives. I've searched for some other criteria ( the full comparison is here, in french with shop/source links: http://forums.jeuxonline.info/showthread.php?t=1072280 ) and made a final score for each manufacturer : SCORE including IP camera sub-score: Netgear : 6.2/10 Linksys : 7.3/10 D-Link : 7.0/10 SCORE excluding IP camera sub-score: Netgear : 6.9/10 Linksys : 7.0/10 D-Link : 6.7/10 On both case, Linksys wins. So here is my little comparison, but because I've never really used these stuffs, I need your help to make a decision on witch manufacturer choose for both my personnal and corporate use. So here are the questions : What manufacturer do you recommend me (Not cisco (except Small business)) ? Why ? Have you called the call center of the customer support of one of these manufacturer ? How it was ? Did you had problems or bad experiences with these equipments ? Any other advices ? ;) Thank you !

    Read the article

  • Intermittent internet access on a flat network - Router is connected

    - by Naveed
    I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

    Read the article

  • BGP Dual-As support, any RFC?

    - by Saran
    Generally most of routers like cisco and junos allow a router to have dual-As to be configured via a "local-as" command which overrides the global as-number configured in "router bgp ". Also local-as prepending may or may not happen based on configurations; for example "no-prepend" in cisco. Now my question is, is there any RFC which which standardises this Dual-As support?? Which provides guidelines on whether or not to prepend the "local-as" to As-Path attributes in the Bgp updates ?

    Read the article

  • What brand of wireless router would be compatible with many broadband modems and easy to use?

    - by Junior Mayhé
    Good afternoon I'm having too many intermittent problems with my DLINK DIR 400 router: Wireless connection is lost with no reason. Perhaps the current router is incompatible with this Scientific Atlanta cable modem DPC 2100R2. Scientific Atlanta is a Cisco company, but I'm really worried about this combination DLink - Cisco. Could anyone recommend me a good wireless router for Windows Vista / Windows 7? Thank you

    Read the article

  • What brand of wireless router would be compatible with many broadband modems and easy to use?

    - by Junior Mayhé
    Good afternoon I'm having too many intermittent problems with my DLINK DIR 400 router: Wireless connection is lost with no reason. Perhaps the current router is incompatible with this Scientific Atlanta cable modem DPC 2100R2. Scientific Atlanta is a Cisco company, but I'm really worried about this combination DLink - Cisco. Could anyone recommend me a good wireless router for Windows Vista / Windows 7? Thank you

    Read the article

  • Does a VPN certificate request need to be encrypted

    - by Kernel Panic
    We have a Cisco 3000 VPN concentrator and use the Cisco VPN client to generate certificate requests, which we then create/authenticate on our certificate server. When the help desk generates the request, they sometimes email that to me, then I generate the certificate on the server. Does the request need to be encrypted? Until the certificate gets generated is there something in the request itself that would need to remain secret? Thank you.

    Read the article

  • What's the fastest way to get CRUD over CGI on a database handle in Perl?

    - by mithaldu
    TL;DR: Want to write CGI::CRUD::Simple (a minimalist interface module for CGI::CRUD), but I want to check first if i overlooked a module that already does that. I usually work with applications that don't have the niceties of having frameworks and such already in place. However, a while ago i found myself in a situation where i was asking myself: "Self, i have a DBI database handle and a CGI query object, isn't there a module somewhere that can use this to give me some CRUD so i can move on and work on other things instead of spending hours writing an interface?" A quick survey on CPAN gave me: CGI::Crud Catalyst::Plugin::CRUD Gantry::Plugins::CRUD Jifty::View::Declare::CRUD CatalystX::CRUD Catalyst::Controller::CRUD CatalystX::CRUD::REST Catalyst::Enzyme Now, I didn't go particularly in-depth when looking at these modules, but, safe the first one, they all seem to require the presence of some sort of framework. Please tell me if i was wrong and i can just plug any of those into a barebones CGI script. CGI::CRUD seemed to do exactly what i wanted, although it did insist on being used through a rather old and C-like script that must be acquired on a different site and then prodded in various ways and manners to produce something useful. I went with that and found that it works pretty neat and that it should be rather easy to write a simple and easy-to-use module that provides a very basic [dbh, cgi IN]-[html OUT] interface to it. However, as my previous survey was rather short and i may have been hasty in dismissing modules or missed others, i find myself wondering whether that would only be duplication of work already done. As such i ponder the question in the title. PS: I tend to be too short in some of my explanations and make too many assumptions that others think about things similarly as me, resulting in leaving out critical details. If you find yourself wondering just what exactly I am thinking about when i say CRUD, please poke me in comments and I'll amend the question.

    Read the article

  • Ubuntu and VirtualBox

    - by Sinan
    I have the following configuration, A host running Windows 7; A guest running Ubuntu 14.04 LTS (VirtualBox); I am connecting a Cisco router directly to my PC running Windows 7 and testing the router for netflow packets in the virtualBox I am having a difficulty capturing the traffic of the netflow from the Cisco device in my virtualBox using port 2222. I tried to use the many different networking modes provided by virutalBox (i.e. NAT, Bridged Adapter, Host only adapter) but I am not successful in capturing the netflow traffic. Could you please advise me on the configuration setup that need to be done on the virtual box to allow capturing the traffic coming from the router. I successfully capture the netflow traffic on my PC (windows 7). Thank you

    Read the article

  • Green IT : Microsoft et Google peuvent mieux faire, selon le rapport annuel de Greenpeace

    Green IT : Microsoft et Google peuvent mieux faire, selon le rapport annuel de Greenpeace Quand les écolos mettent leur nez dans le milieu de l'informatique, certaines firmes se font tapper sur les doigts. De bons points ont cependant été accordés à Cisco et Ericsson, qui sont arrivés en première position des entreprises informatiques ayant le moins d'impact sur les changements climatiques. Malgré son lobbying en faveur des énergies propres et ses investissements dans les énergies renouvelables, Google obtient un mauvais résultat et se place à la 6éme position. Greenpeace a publié en début de semaine sont Cool IT Leaderboard annuel. Si la première place a été attribuée à Cisco, c'est à cause de ...

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >