Search Results

Search found 8193 results on 328 pages for 'dev ray'.

Page 33/328 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

  • Use old raid drive as boot device without data loss

    - by Gabriel
    There were two disks in sw-raid. There were /dev/md1 as swap, /dev/md2 as boot and a /dev/md3 with ext4. The sw-raid was disabled by stopping and removing mdadm and then zeroing the superblock on each /dev/mdX partition with: sudo mdadm --zero-superblock /dev/sda1 sudo mdadm --zero-superblock /dev/sda2 sudo mdadm --zero-superblock /dev/sda3 In the disk that is the first boot device, I don't know if it's relevant, the system type of each partition was set back from fd to 82 or 83 with fdisk, /etc/fstab was updated, changing /dev/mdX to /dev/sdaX, and grub was reinstalled on the boot partition (/dev/sda2) with grub-instal. But the system wont boot. What else should I do to use this disk as the boot device without reinstall or data loss? Current output of fdisk Device Boot Start End Blocks Id System /dev/sda1 2048 33556480 16777216+ 82 Linux swap / Solaris /dev/sda2 * 33558528 34607104 524288+ 83 Linux /dev/sda3 34609152 3907027120 1936208984+ 83 Linux With it doesn't boot I mean that it stops in the grub console (with the grub> symbol). A ls command says: (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) (hd1) (hd1,msdos1) It's weird because hd1 was formatted with ext4...

    Read the article

  • XFS: No space left on device

    - by beketa
    I am using XFS on small HDD (/dev/sdb1, less than 1TB) and storing many small files (-32KB). df -h and -i show that it has available space. # df -hv Filesystem Size Used Avail Use% Mounted on /dev/sda3 127G 19G 102G 16% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 168K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/sda1 99M 20M 75M 21% /boot /dev/sdb1 136G 123G 14G 91% /mnt/sdb1 # df -iv Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda3 8421376 36199 8385177 1% / tmpfs 4126158 5 4126153 1% /lib/init/rw udev 4124934 671 4124263 1% /dev tmpfs 4126158 1 4126157 1% /dev/shm /dev/sda1 26112 222 25890 1% /boot /dev/sdb1 24905120 11076608 13828512 45% /mnt/sdb1 However I got No space left on device error. # touch /mnt/sdb1/test touch: cannot touch `/mnt/sdb1/test': No space left on device I think inode64 issue is not related to this case because drive is less than 1TB and df -i shows that there are free inodes. I unmounted and mounted with -o inode64 but got the same error. xfs_repair does not report any problem. xfs_info shows drive information as follows. # xfs_info /dev/sdb1 meta-data=/dev/sdb1 isize=1024 agcount=16, agsize=2227764 blks = sectsz=512 attr=2 data = bsize=4096 blocks=35644210, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=17404, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 Any ideas? Thanks!

    Read the article

  • How to copy a large LVM volume (14TB) from one server to another?

    - by bruce
    I have to copy a very large LVM volume from server A to server B. Below is the filesystem of server A and server B Server A [root@AVDVD-Filer ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_avdvdfiler-lv_root 16T 14T 1.5T 91% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/vg_avdvdfiler-test 2.3T 201M 2.1T 1% /test /dev/sr0 3.3G 3.3G 0 100% /mnt server B [root@localhost ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-LogVol00 20G 2.5G 16G 14% / tmpfs 3.0G 0 3.0G 0% /dev/shm /dev/cciss/c0d0p1 194M 23M 162M 13% /boot /dev/mapper/VolGroup00-LogVol00 16T 133M 15T 1% /xiangao/lv1 /dev/mapper/VolGroup00-LogVol01 4.7T 190M 4.5T 1% /xiangao/lv2 I want to copy the LVM volume /dev/mapper/vg_avdvdfiler-lv_root on server A to LVM volume /dev/mapper/VolGroup00-LogVol00 on server B. Server A and server B are in the same IP segment. In the LVM volume on server A, there is all average 500M avi wmv mp4 etc. I tried mounting /dev/mapper/vg_avdvdfiler-lv_root on server A to server B through NFS, then use cp to copy. It is clear I failed. Because the LVM volume is too big, I do not have good idea why. I hope a good solution here.

    Read the article

  • Adding Extra Hard Drives Debian Fdisk

    - by Belgin Fish
    well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

    Read the article

  • Facebook Error: "The client token cannot be used for this API" - works on DEV and STAGE but not on LIVE app?

    - by Studio Temp
    I've built a notification sending system that sends notifications to all users of our app, using the app access token. This system is currently running on my localhost. When I configure it with the appid and appsecret for my dev and stage environments, it works fine. But when I put in the appid and appsecret of the LIVE app, I get this error: {"message":"The client token cannot be used for this API", "type":"OAuthException", "code":190} So what's different between dev and live? Dev and Stage are in sandbox mode, Live is not. So I tried disabling sandbox mode on Dev/Stage and they continue to function fine. Dev works fine, Stage works fine, Live gives this error. All other code is the same except for the appid, appsecret, and redirect_uri (changing it to match the domain of each environment). I have checked this post, but unfortunately resetting our appsecret on a site with 1,000,000 users is not something we can do at the moment (too much other functionality relies on it).

    Read the article

  • swapon --all --verbose : 'read swap header failed: Invalid argument'

    - by user66088
    Recently ran through EnableHibernateWithEncryptedSwap and ran the following command: swapon --all --verbose and received: 'read swap header failed: Invalid argument' How do I fix this? Here's some more pertinent output... Output of sudo fdisk -l: Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00006d20 Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 156301311 77899777 5 Extended /dev/sda5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/ubuntu--t10194-root: 75.5 GB, 75539415040 bytes 255 heads, 63 sectors/track, 9183 cylinders, total 147537920 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ubuntu--t10194-root doesn't contain a valid partition table Disk /dev/mapper/ubuntu--t10194-swap_1: 4227 MB, 4227858432 bytes 255 heads, 63 sectors/track, 514 cylinders, total 8257536 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x08040000 Disk /dev/mapper/ubuntu--t10194-swap_1 doesn't contain a valid partition table Disk /dev/mapper/cryptswap1: 4225 MB, 4225761280 bytes 255 heads, 63 sectors/track, 513 cylinders, total 8253440 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd2236983 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Thanks for any and ALL help!

    Read the article

  • How do I align my partition table properly?

    - by Jorge Castro
    I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

    Read the article

  • E: mkinitramfs failure cpio 141 gzip 1

    - by Nagaraj Shindagi
    I'm using Ubuntu 12.04 LTS with Dell power-edge R720 server, facing the problem when I apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up linux-image-3.2.0-37-generic-pae (3.2.0-37.58) ... Running depmod. update-initramfs: deferring update (hook will be called later) The link /initrd.img is a dangling linkto /boot/initrd.img-3.2.0-37-generic-pae Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-37-generic-pae /boot/vmlinuz-3.2.0-37-generic-pae update-initramfs: Generating /boot/initrd.img-3.2.0-37-generic-pae gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-3.2.0-37-generic-pae with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0 -37-generic-pae.postinst line 1010. dpkg: error processing linux-image-3.2.0-37-generic-pae (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic-pae: linux-image-generic-pae depends on linux-image-3.2.0-37-generic-pae; however: Package linux-image-3.2.0-37-generic-pae is not configured yet. dpkg: error processing linux-image-generic-pae (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup erro r from a previous failure. Errors were encountered while processing: linux-image-3.2.0-37-generic-pae linux-image-generic-pae E: Sub-process /usr/bin/dpkg returned an error code (1) ------------ even i tried with apt-get clean apt-get remove apt-get autoremove apt-get purge there is no difference it will show the same error message as above, even i checked the disk space ----------- Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 24030076 612456 22196964 3% / udev 16536644 4 16536640 1% /dev tmpfs 6618884 1164 6617720 1% /run none 5120 0 5120 0% /run/lock none 16547208 72 16547136 1% /run/shm cgroup 16547208 0 16547208 0% /sys/fs/cgroup /dev/sda1 93207 75034 13361 85% /boot /dev/sda10 9611492 1096076 8027176 13% /tmp /dev/sda12 9611492 226340 8896912 3% /opt /dev/sda13 9611492 152516 8970736 2% /srv /dev/sda7 9611492 592208 8531044 7% /home /dev/sda8 9611492 2656736 6466516 30% /usr /dev/sda9 9611492 696468 8426784 8% /var /dev/sda14 961237336 134563516 777845764 15% /usr/data /dev/sda15 618991384 84498388 503050052 15% /usr/data1 /dev/sda11 9611492 152616 8970636 2% /usr/local --------------- is there any problem on allotting the space to the partiations please let me know the solution its on urgent please help me on this issue regards

    Read the article

  • 'cannot find -lboost_iostreams' while trying to install Deluge 1.3.3

    - by Muhammad
    While trying to install deluge 1.3.3 (I need this specific version) I get an error. I install all the needed packages through sudo apt-get install g++ make python-all-dev python-all python-dbus \ python-gtk2 python-notify librsvg2-common python-xdg python-support \ subversion libboost-dev libboost-python-dev \ libboost-thread-dev libboost-date-time-dev libboost-filesystem-dev \ libssl-dev zlib1g-dev python-setuptools \ python-mako python-twisted-web python-chardet python-simplejson I then build it $ python setup.py build and $ sudo python setup.py install then I get a long list at the end of which there is the error /usr/bin/ld: cannot find -lboost_iostreams collect2: ld returned 1 exit status error: command 'gcc' failed with exit status 1 Can you help me out with this?

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Linux Software RAID recovery

    - by Zoredache
    I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

    Read the article

  • Changing the default installation path to a newly installed hard disk

    - by mgj
    Hi, I am currently working on a dual-booted PC. I am using Windows XP and Ubuntu 10.04 Lucid Lynx released in April 2010. The allocated partition to Ubuntu that I am making use of has almost exhausted. Current memory allocations on the PC wrt Ubuntu OS looks like this: bodhgaya@pc146724-desktop:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 8.6G 8.0G 113M 99% / none 998M 268K 998M 1% /dev none 1002M 580K 1002M 1% /dev/shm none 1002M 100K 1002M 1% /var/run none 1002M 0 1002M 0% /var/lock none 1002M 0 1002M 0% /lib/init/rw /dev/sda1 25G 16G 9.8G 62% /media/C /dev/sdb1 37G 214M 35G 1% /media/ubuntulinuxstore bodhgaya@pc146724-desktop:~$ cd /tmp I am trying to mount a 40GB(/dev/sdb1 - given below) new hard disk along with my existing Ubuntu system to overcome with hard disk space related issues. I referred to the following tutorial to mount a new hard disk onto the system:- http://www.smorgasbord.net/how-to-in...untu-linux%20/ I was able to successfully mount this hard disk for Ubuntu 0S. I have this new hard disk setup in /media/ubuntulinuxstore directory. The current partition in my system looks like this: bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ sudo fdisk -l [sudo] password for bodhgaya: Disk /dev/sda: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x446eceb5 Device Boot Start End Blocks Id System /dev/sda1 * 2 3264 26210047+ 7 HPFS/NTFS /dev/sda2 3265 4385 9004432+ 83 Linux /dev/sda3 4386 4863 3839535 82 Linux swap / Solaris Disk /dev/sdb: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfa8afa8a Device Boot Start End Blocks Id System /dev/sdb1 1 4862 39053983+ 7 HPFS/NTFS bodhgaya@pc146724-desktop:/media/ubuntulinuxstore$ Now, I have a concern wrt the "location" where the new softwares will be installed. Generally softwares are installed via the terminal and by default a fixed path is used to where the post installation set up files can be found (I am talking in context of the drive). This is like the typical case of Windows, where softwares by default are installed in the C: drive. These days people customize their installations to a drive which they find apt to serve their purpose (generally based on availability of hard disk space). I am trying to figure out how to customize the same for Ubuntu. As we all know the most softwares are installed via commands given from the Terminal. My road block is how do I redirect the default path set on the terminal where files get installed to this new hard disk. This if done will help me overcome space constraints I am currently facing wrt the partition on which my Ubuntu is initially installed. I would also by this, save time on not formatting my system and reinstalling Ubuntu and other softwares all over again. Please help me with this, your suggestions are much appreciated.

    Read the article

  • Fix overlapping partitions

    - by Alex
    I have problem with overlapping partitions. GParted shows me all my disk as unallocated area, output of fdisk below: alex@alex-ThinkPad-SL510:~$ sudo fdisk -l /dev/sda Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb4b9b90 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2457599 1227776 7 HPFS/NTFS/exFAT /dev/sda2 2457600 571351724 284447062+ 7 HPFS/NTFS/exFAT /dev/sda3 571342846 604661759 16659457 5 Extended /dev/sda4 604661760 625137663 10237952 7 HPFS/NTFS/exFAT /dev/sda5 598650880 604661759 3005440 82 Linux swap / Solaris /dev/sda6 571342848 598650879 13654016 83 Linux Partition table entries are not in disk order Do I understand correctly that overlapping partitions are sda2 and sda3 (sda2 and sda6 overlaps too, because sda6 is the first chunk of sda3, sda3 has type "extended")? Are sda2 and sda3 the cause of problem? How can i fix it without deleting partitions? My OS is Ubuntu 12.04, 64 bit. Thanks in advance.

    Read the article

  • How to remove iso 9660 from USB?

    - by a_m0d
    I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

    Read the article

  • Ubuntu 12.04 boot degraded raid

    - by beacon_bonanza
    I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails. I've tried to copy the MBR from disk 1 to 2: dd if=/dev/sda of=/dev/sdb bs=512 count=1 but this didn't make a difference. Any ideas how to get it to boot from just the second disk? fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sda1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sda2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sdb1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sdb2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00035b05 Device Boot Start End Blocks Id System /dev/sdd1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c73aa Device Boot Start End Blocks Id System /dev/sdc1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/md1: 1984.3 GB, 1984264208384 bytes 2 heads, 4 sectors/track, 484439504 cylinders, total 3875516032 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2: 2000.3 GB, 2000263380992 bytes 2 heads, 4 sectors/track, 488345552 cylinders, total 3906764416 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0: 16.0 GB, 15990652928 bytes 2 heads, 4 sectors/track, 3903968 cylinders, total 31231744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

    Read the article

  • IE 11 Preview « apporte la meilleure expérience du Web sur Windows » avec le support de WebGL, SPDY et des « Dev Tools » entièrement reconstruits

    IE 11 Preview « apporte la meilleure expérience du Web sur Windows » avec le support de WebGL, SPDY et des « Dev Tools » entièrement reconstruits Windows 8.1 Preview est là, et avec lui la Preview du navigateur Internet Explorer 11, « qui apporte la meilleure expérience du Web sur un périphérique Windows ».Optimisé pour les mobiles avec le support des récents standards du Web, IE 11 Preview rapproche les sites Web des utilisateurs Windows, offre une sécurité améliorée et dispose des nouveaux outils de développement pour faciliter le test des applications Web.La prise en charge de la navigation t...

    Read the article

  • What is the kd tree intersection logic?

    - by bobobobo
    I'm trying to figure out how to implement a KD tree. On page 322 of "Real time collision detection" by Ericson The text section is included below in case Google book preview doesn't let you see it the time you click the link text section Relevant section: The basic idea behind intersecting a ray or directed line segment with a k-d tree is straightforward. The line is intersected against the node's splitting plane, and the t value of intersection is computed. If t is within the interval of the line, 0 <= t <= tmax, the line straddles the plane and both children of the tree are recursively descended. If not, only the side containing the segment origin is recursively visited. So here's what I have: (open image in new tab if you can't see the lettering) The logical tree Here the orange ray is going thru the 3d scene. The x's represent intersection with a plane. From the LEFT, the ray hits: The front face of the scene's enclosing cube, The (1) splitting plane The (2.2) splitting plane The right side of the scene's enclosing cube But here's what would happen, naively following Ericson's basic description above: Test against splitting plane (1). Ray hits splitting plane (1), so left and right children of splitting plane (1) are included in next test. Test against splitting plane (2.1). Ray actually hits that plane, (way off to the right) so both children are included in next level of tests. (This is counter-intuitive - shouldn't only the bottom node be included in subsequent tests) Can some one describe what happens when the orange ray goes through the scene correctly?

    Read the article

  • grub problem after grub-repair

    - by alireza
    I had two OS,win 7 and Ubuntu, I was working with win and went out of the room and when came back I saw Grub Rescue!!! I booted live and did grub_repaire and it still says multiple active partitions.operating system not found I feel that it can not find the ubuntu hard drive at all! ! ubuntu@ubuntu:/dev$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xde771741 Device Boot Start End Blocks Id System /dev/sda1 * 61 61 0 0 Empty /dev/sda2 2048 30146559 15072256 27 Hidden NTFS WinRE /dev/sda3 * 30146560 30351359 102400 7 HPFS/NTFS/exFAT /dev/sda4 30351360 334483299 152065970 7 HPFS/NTFS/exFAT ubuntu@ubuntu:/dev$ ls autofs dvdrw loop4 ppp ram5 shm tty15 tty29 tty42 tty56 ttyS10 ttyS24 uinput vcsa1 block ecryptfs loop5 psaux ram6 snapshot tty16 tty3 tty43 tty57 ttyS11 ttyS25 urandom vcsa2 bsg fb0 loop6 ptmx ram7 snd tty17 tty30 tty44 tty58 ttyS12 ttyS26 usbmon0 vcsa3 btrfs-control fd loop7 pts ram8 sr0 tty18 tty31 tty45 tty59 ttyS13 ttyS27 usbmon1 vcsa4 bus full loop-control ram0 ram9 stderr tty19 tty32 tty46 tty6 ttyS14 ttyS28 usbmon2 vcsa5 cdrom fuse mapper ram1 random stdin tty2 tty33 tty47 tty60 ttyS15 ttyS29 v4l vcsa6 cdrw fw0 mcelog ram10 rfkill stdout tty20 tty34 tty48 tty61 ttyS16 ttyS3 vcs vcsa7 char hpet mei ram11 rtc tty tty21 tty35 tty49 tty62 ttyS17 ttyS30 vcs1 vga_arbiter console input mem ram12 rtc0 tty0 tty22 tty36 tty5 tty63 ttyS18 ttyS31 vcs2 video0 core kmsg net ram13 sda tty1 tty23 tty37 tty50 tty7 ttyS19 ttyS4 vcs3 zero cpu log network_latency ram14 sda2 tty10 tty24 tty38 tty51 tty8 ttyS2 ttyS5 vcs4 cpu_dma_latency loop0 network_throughput ram15 sda3 tty11 tty25 tty39 tty52 tty9 ttyS20 ttyS6 vcs5 disk loop1 null ram2 sda4 tty12 tty26 tty4 tty53 ttyprintk ttyS21 ttyS7 vcs6 dri loop2 oldmem ram3 sg0 tty13 tty27 tty40 tty54 ttyS0 ttyS22 ttyS8 vcs7 dvd loop3 port ram4 sg1 tty14 tty28 tty41 tty55 ttyS1 ttyS23 ttyS9 vcsa ubuntu@ubuntu:/dev$ someone said { Remove the boot flag from sda1, by typing in a terminal: sudo fdisk /dev/sda1 Then press the 'a' key, and 'Enter'. Then press the '1' key, and 'Enter'. Then press the 'w' key, and 'Enter'. } but after grub-repair I got this log: http://paste.ubuntu.com/1371297/ then I try sudo fdisk /dev/sda1 and But It says unable to open /dev/sda1! which is right as sda1 is not in dev folder (look at the picture!) Can anybody help me? I need to work on my windows for the rest of the semester and don't care of my ubuntu. thank you

    Read the article

  • How do I align my partition table properly?

    - by Jorge Castro
    I am in the process of building my first RAID5 array. I've used mdadm to create the following set up: root@bondigas:~# mdadm --detail /dev/md1 /dev/md1: Version : 00.90 Creation Time : Wed Oct 20 20:00:41 2010 Raid Level : raid5 Array Size : 5860543488 (5589.05 GiB 6001.20 GB) Used Dev Size : 1953514496 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Wed Oct 20 20:13:48 2010 State : clean, degraded, recovering Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 64K Rebuild Status : 1% complete UUID : f6dc829e:aa29b476:edd1ef19:85032322 (local to host bondigas) Events : 0.12 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 4 8 64 3 spare rebuilding /dev/sde While that's going I decided to format the beast with the following command: root@bondigas:~# mkfs.ext4 /dev/md1p1 mke2fs 1.41.11 (14-Mar-2010) /dev/md1p1 alignment is offset by 63488 bytes. This may result in very poor performance, (re)-partitioning suggested. Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=16 blocks, Stripe width=48 blocks 97853440 inodes, 391394047 blocks 19569702 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 11945 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 Writing inode tables: ^C 27/11945 root@bondigas:~# ^C I am unsure what to do about "/dev/md1p1 alignment is offset by 63488 bytes." and how to properly partition the disks to match so I can format it properly.

    Read the article

  • error installing python wrapper for openkinect

    - by auraham
    I tried to install python wrappers for OpenKinect on Ubuntu 12.04, but I can't due this error: $ sudo apt-get install python2.7-dev python2.7-dev : Depends: libexpat1-dev but it is not going to be installed Depends: libssl-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. Python wrapper requires these dependencies: Cython python-dev (error above) python-numpy how can I install python-dev?

    Read the article

  • Accessing host LVM partition from Windows XP through Virt.manager 0.8.5 / Qemu / KVM

    - by Nico de Smidt
    Hi, requested use case is having a Windows XP SP3 guest running in 64bit Ubuntu. (Linux pcs 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux) I want this guest to access an LVM LV on the Ubuntu disk. I've setup the following LVM config: --- Logical volume --- LV Name /dev/storage/sdc1 VG Name storage LV UUID Zg5IMC-OlqB-prL5-fgg4-3A9A-OgKP-oZ0QkJ LV Write Access read/write LV Status available # open 0 LV Size 1.01 GiB Current LE 259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:3 -- 1) I've setup a storage pool for /dev/storage 2) I've mkfs.vfat /dev/storage/sdc1 3) and made a virtual IDE disk in the virt-manager setup for the guest. Target device: IDE Disk 2 Source path: /dev/storage/sdc1 -- Now when running XP (guest) Windows sees a new disk in Disk Manager and want's to install a partition on it, since it believes the drive is empty. After formatting from within Windows I can put data on the new disk volume. -- Back in Ubuntu however I cannot access this this any more since it created a partition within an LVM Logical Volume. Running fdisk -l shows the following: root@pcs:/media# fdisk -l /dev/storage/sdc1 Disk /dev/storage/sdc1: 1086 MB, 1086324736 bytes 32 heads, 63 sectors/track, 1052 cylinders Units = cylinders of 2016 * 512 = 1032192 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d72e4f4 Device Boot Start End Blocks Id System /dev/storage/sdc1p1 1 1050 1058368+ c W95 FAT32 (LBA) -- which seems fine to me, but when trying to mount /dev/storage/sdc1p1 I get the following error: mount /dev/storage/sdc1p1 /media/xp mount: special device /dev/storage/sdc1p1 does not exist which makes sense since in lvdisplay sdc1p1 does not exist Main question: I want to mount the vfat partition in both Ubuntu and XP What am I missing here????? regards, and thanks for your consideration. Nico

    Read the article

  • Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

    - by Zach
    sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

    Read the article

  • How i can fix " E: Internal Error, No file name for libc6 "

    - by SMAOUH
    Hello all please i need your help to fix this problem i have 2 broken packages system and i can't reinstall them or make any other option : update , upgrade , install & remove app .... Ubuntu 12.04.3 I have not found any solutions please help me sudo apt-get install -f smaouh@Linux:~$ sudo apt-get install -f [sudo] password for smaouh: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libopenal1 libpam-winbind libao-common gnome-exe-thumbnailer libqca2-plugin-ossl gir1.2-champlain-0.12 libmagickcore4 libmagickwand4 libmagickcore4-extra libcapi20-3 python-unidecode libopenal-data liblqr-1-0 gir1.2-gtkchamplain-0.12 unixodbc wine-gecko2.21 libchamplain-0.12-0 python-glade2 imagemagick-common libosmesa6 oss-compat gimp-help-common esound-common gimp-help-en libmpg123-0 ttf-mscorefonts-installer imagemagick winbind libodbc1 fonts-droid fonts-unfonts-core libchamplain-gtk-0.12-0 libclutter-gtk-1.0-0 gir1.2-gtkclutter-1.0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 386 not upgraded. 4 not fully installed or removed. After this operation, 0B of additional disk space will be used. dpkg: error processing libc6 (--configure): libc6:amd64 2.15-0ubuntu10.5 cannot be configured because libc6:i386 is in a different version (2.15-0ubuntu10.4) dpkg: dependency problems prevent configuration of libc-dev-bin: libc-dev-bin depends on libc6 (>> 2.15); however: Package libc6 is not configured yet. libc-dev-bin depends on libc6 (<< 2.16); however: Package libc6 is not configured yet. dpkg: error processing libc-dev-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-dev: libc6-dev depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. libc6-dev depends on libc-dev-bin (= 2.15-0ubuntu10.5); however: Package libc-dev-bin is not configured yet. dpkg: error processing libc6-dev (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of libc6-i386: libc6-i386 depends on libc6 (= 2.15-0ubuntu10.5); however: Package libc6 is not configured yet. dpkg: error processing libc6-i386 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already Errors were encountered while processing: libc6 libc-dev-bin libc6-dev libc6-i386 E: Sub-process /usr/bin/dpkg returned an error code (1) smaouh@Linux:~$

    Read the article

  • How to resize / enlarge / grow a non-LVM ext4 partition

    - by Mischa
    I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

    Read the article

  • changing drive nodes & hdparm

    - by Kalamalka Kid
    I am currently attempting to create a command that works at startup to kill the power on two of my very noisy hard drives. I have edited the etc/rc.local file to include this command: sudo hdparm -y /dev/sdc sudo hdparm -y /dev/sdd exit 0 While I think this should work, it seems the allocated drives keep switching around every time I reboot. I have sda, sdb, sdc, sdd, and sde but they keep getting jumbled around (making the drive I wish to shut different than sdd which is making the task of shutting down the right drive on start-up quite cumbersome. I had a perfectly functioning ftstab file working which disappeard, but I restored it from the back up into the etc/ dir: # <file system> <mount point> <type> <options> <dump> <pass> #Entry for /dev/sda1 : UUID=43c09daf-08a5-44f2-89b0-fc7c6f0d1e67 / ext4 errors=remount-ro 0 1 #Entry for /dev/sdd1 : UUID=443AFBAD7FE50945 /media/DX100 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=FCE456F5E456B21E /media/GalaxyM83 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdf1 : UUID=1CA057FDA057DBB8 /media/Holideck ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdc1 : UUID=7ABB49654B799D40 /media/JX3P ntfs defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 it seems every time I boot the order of the drives changes. I do not know how to resolve this. A quick workaround the problem was to go with UUID instead of the DEV letter by editing the etc/rc.local file to include: hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 So I thought I was in the clear, as I heard both hard drives die down during the boot sequence, BUT, as soon as I log in both drives start up again! so now I have to figure out what is making them start up again after log in, or perhaps another way to get them to turn off. Is there some kind of command i can get to execute after log in? I tried editing the startup applications to include an autossh with: autoshh - sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 autoshh - sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 but this did not seem to work to turn off the disks after log in.

    Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >