Search Results

Search found 2510 results on 101 pages for 'hp pavilion'.

Page 33/101 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• How do I get Catalyst 11.10 with ATI Radeon Mobility HD 5470 working on an HP DV7?

  - by S Kumar

  I have a HP DV7 with a HD 5470 512M card. Installation of the Catalyst 11.10 is repeatedly failing on a fresh install of Ubuntu 11.10. Catalyst 11.8 proprietary drivers were working well with Ubuntu 11.04. I have tried installing directly from the .run and generating the distribution specific packages. Nothing has worked. After installation which goes through successfully, the system hangs on reboot after the flashing dots. I have to replace the /etc/X11/xorg.conf to get the X working. I have followed instructions as per the http://wiki.cchtml.com/index.php/Main_Page wiki. Request for support to ATI/AMD gives the response that this model is unsupported on Linux by HP :). Updated 14-Nov I have reverted back to the open source drivers which work well enough for me.

  Read the article

• Apple, nouveau numéro 1 du marché des ordinateurs portables grâce à l'iPad devant HP et Acer, selon DisplaySearch

  Apple, nouveau numéro 1 du marché des ordinateurs portables grâce à l'iPad Devant HP et Acer, selon DisplaySearch Une étude de DisplaySearch montre que Apple est désormais le numéro 1 du marché des ordinateurs portables grâce à ses ventes d'iPad. Selon l'étude, la flambée des ventes des tablettes d'Apple au cours du quatrième trimestre de l'année 2010 a donné une part de marché mondiale de 17,2 % au constructeur. Au cours du quatrième trimestre, Apple aurait ainsi écoulé 10,2 millions d'unités de ses laptops et de ses tablettes. Soit près d'un million de plus que HP, qui occupe la seconde place avec 9,3 millions de terminaux vendus. Et 1,8 millions de plus que Acer, troisiè...

  Read the article

• HP 530 Wireless problem. Bad communication with access point

  - by foxy

  I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

  Read the article

• How do I install Ubuntu on an HP Touchsmart 600?

  - by user70004

  I have a hp touchsmart 600 pc series. I tried to install the lastest version of ubuntu (12.04 LTS, 64bits) but it would not install. I popped in the cd and the menu asked for a reboot. Which I did. As ubuntu was about to install(purple background with 2 symbols underneth) the screen was dark and a prompt kept blinking for like over 10 minutes. So I turned off my pc and loaded my window os. I ran ubuntu again and used the help install feature. Needless to say the same thing happen again! does ubuntu work on hp touchsmart computers?

  Read the article

• HP booste l'accès Wi-Fi en entreprise à 900 Mb/s, avec ses nouvelles offres Mobile Access Solution

  HP booste l'accès Wi-Fi en entreprise à 900 Mb/s, avec ses nouvelles offres Mobile Access Solution Aujourd'hui, de nombreuses entreprises utilisent la technologie Wi-Fi pour offrir des accès Internet à leur personnel. De ce fait, elles sont toujours à la recherche de capacités de plus en plus grandes dans ce domaine. Pour y répondre, HP vient de lancer de nouvelles offres dans sa gamme Mobile Access Solution, qui joue dans la cour des connexion Wi-Fi ultra-rapides. Ces points d'accès permettent en effet de fournir jusqu'à 900 Mb/s aux professionnels, et ils sont trois : MSM460 ; MSM466 et SMSM430. Les deux premiers sont dual-radio et possèdent chacun trois flux spatiaux ainsi qu'une puissance de 450Mb/...

  Read the article

• HP dévoile ses PC tout-en-un sous Windows 8, le Spectre One, l'Envy et le Pavillon seront commercialisés à partir d'octobre

  HP dévoile ses PC tout-en-un sous Windows 8 le Spectre One, l'Envy et le Pavillon seront commercialisés à partir d'octobre La sortie de Windows 8 est proche. C'est le moment pour les constructeurs de donner un avant-gout des dispositifs qui seront commercialisés à compter de la date officielle de lancement de l'OS le 26 octobre prochain. Le constructeur HP a levé le voile sur plusieurs modèles de PC tout-en-un (All-in-one) fonctionnant sur Windows 8. Le premier de la liste dont la dalle n'est pas tactile est le PC Spectre One. Composé d'un large écran Full HD de 23 pouces d'une résolution de 1920x1080 pixels, ce modèle embarque un processeur Intel Ivy Bridge, une mémoire p...

  Read the article

• NFS issue brings down entire vSphere ESX estate

  - by growse

  I experienced an odd issue this morning where an NFS issue appeared to have taken down the majority of my VMs hosted on a small vSphere 5.0 estate. The infrastructure itself is 4x IBM HS21 blades running around 20 VMs. The storage is provided by a single HP X1600 array with attached D2700 chassis running Solaris 11. There's a couple of storage pools on this which are exposed over NFS for the storage of the VM files, and some iSCSI LUNs for things like MSCS shared disks. Normally, this is pretty stable, but I appreciate the lack of resiliancy in having a single X1600 doing all the storage. This morning, in the logs of each ESX host, at around 0521 GMT I saw a lot of entries like this: 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4cf9a8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4dc9e8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4d3fa8 3 2011-11-30T05:21:54.161Z cpu2:2050)NFSLock: 608: Stop accessing fd 0x41000a4de0a8 3 [....] 2011-11-30T06:16:07.042Z cpu0:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:17:01.459Z cpu2:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:25:17.887Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000a4c2b28 3 2011-11-30T06:27:16.063Z cpu3:4011)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:35:30.827Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:36:37.953Z cpu6:2054)NFS: 292: Restored connection to the server 10.13.111.197 mount point /tank/ISO, mounted as 5acdbb3e-410e56e3-0000-000000000000 ("ISO (1)") 2011-11-30T06:40:08.242Z cpu6:2054)NFSLock: 608: Stop accessing fd 0x41000a4c3e68 3 2011-11-30T06:40:34.647Z cpu3:2051)NFSLock: 568: Start accessing fd 0x41000a4d8928 again 2011-11-30T06:44:42.663Z cpu1:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:44:53.973Z cpu0:4011)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:51:28.296Z cpu5:2058)NFSLock: 608: Stop accessing fd 0x41000ae3c528 3 2011-11-30T06:51:44.024Z cpu4:2052)NFSLock: 568: Start accessing fd 0x41000ae3b8e8 again 2011-11-30T06:56:30.758Z cpu4:2058)WARNING: NFS: 283: Lost connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T06:56:53.389Z cpu7:2055)NFS: 292: Restored connection to the server 10.13.111.197 mount point /sastank/VMStorage, mounted as f0342e1c-19be66b5-0000-000000000000 ("SAStank") 2011-11-30T07:01:50.350Z cpu6:2054)ScsiDeviceIO: 2316: Cmd(0x41240072bc80) 0x12, CmdSN 0x9803 to dev "naa.600508e000000000505c16815a36c50d" failed H:0x0 D:0x2 P:0x0 Valid sense data: 0x5 0x24 0x0. 2011-11-30T07:03:48.449Z cpu3:2051)NFSLock: 608: Stop accessing fd 0x41000ae46b68 3 2011-11-30T07:03:57.318Z cpu4:4009)NFSLock: 568: Start accessing fd 0x41000ae48228 again (I've put a complete dump from one of the hosts on pastebin: http://pastebin.com/Vn60wgTt) When I got in the office at 9am, I saw various failures and alarms and troubleshooted the issue. It turned out that pretty much all of the VMs were inaccessible, and that the ESX hosts either were describing each VM as 'powered off', 'powered on', or 'unavailable'. The VMs described as 'powered on' where not in any way reachable or responding to pings, so this may be lies. There's absolutely no indication on the X1600 that anything was awry, and nothing on the switches to indicate any loss of connectivity. I only managed to resolve the issue by rebooting the ESX hosts in turn. I have a number of questions: What the hell happened? If this was a temporary NFS failure, why did it put the ESX hosts into a state from which a reboot was the only recovery? In the future, when the NFS server goes a little off-piste, what would be the best approach to add some resilience? I've been looking at budgeting for next year and potentially have budget to purchase another X1600/D2700/disks, would an identical mirrored disk setup help to mitigate these sorts of failures automatically? Edit (Added requested details) To expand with some details as requested: The X1600 has 12x 1TB disks lumped together in mirrored pairs as tank, and the D2700 (connected with a mini SAS cable) has 12x 300GB 10k SAS disks lumped together in mirrored pairs as sastank zpool status pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c7t0d0s0 ONLINE 0 0 0 errors: No known data errors pool: sastank state: ONLINE scan: scrub repaired 0 in 74h21m with 0 errors on Wed Nov 30 02:51:58 2011 config: NAME STATE READ WRITE CKSUM sastank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t14d0 ONLINE 0 0 0 c7t15d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t16d0 ONLINE 0 0 0 c7t17d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t18d0 ONLINE 0 0 0 c7t19d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t20d0 ONLINE 0 0 0 c7t21d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t22d0 ONLINE 0 0 0 c7t23d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t24d0 ONLINE 0 0 0 c7t25d0 ONLINE 0 0 0 errors: No known data errors pool: tank state: ONLINE scan: scrub repaired 0 in 17h28m with 0 errors on Mon Nov 28 17:58:19 2011 config: NAME STATE READ WRITE CKSUM tank ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c7t1d0 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c7t5d0 ONLINE 0 0 0 c7t6d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c7t8d0 ONLINE 0 0 0 c7t9d0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c7t10d0 ONLINE 0 0 0 c7t11d0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c7t12d0 ONLINE 0 0 0 c7t13d0 ONLINE 0 0 0 errors: No known data errors The filesystem exposed over NFS for the primary datastore is sastank/VMStorage zfs list NAME USED AVAIL REFER MOUNTPOINT rpool 45.1G 13.4G 92.5K /rpool rpool/ROOT 2.28G 13.4G 31K legacy rpool/ROOT/solaris 2.28G 13.4G 2.19G / rpool/dump 15.0G 13.4G 15.0G - rpool/export 11.9G 13.4G 32K /export rpool/export/home 11.9G 13.4G 32K /export/home rpool/export/home/andrew 11.9G 13.4G 11.9G /export/home/andrew rpool/swap 15.9G 29.2G 123M - sastank 1.08T 536G 33K /sastank sastank/VMStorage 1.01T 536G 1.01T /sastank/VMStorage sastank/comstar 71.7G 536G 31K /sastank/comstar sastank/comstar/sql_tempdb 6.31G 536G 6.31G - sastank/comstar/sql_tx_data 65.4G 536G 65.4G - tank 4.79T 578G 42K /tank tank/FTP 269G 578G 269G /tank/FTP tank/ISO 28.8G 578G 25.9G /tank/ISO tank/backupstage 2.64T 578G 2.49T /tank/backupstage tank/cifs 301G 578G 297G /tank/cifs tank/comstar 1.54T 578G 31K /tank/comstar tank/comstar/msdtc 1.07G 579G 32.8M - tank/comstar/quorum 577M 578G 47.9M - tank/comstar/sqldata 1.54T 886G 304G - tank/comstar/vsphere_lun 2.09G 580G 22.2M - tank/mcs-asset-repository 7.01M 578G 6.99M /tank/mcs-asset-repository tank/mscs-quorum 55K 578G 36K /tank/mscs-quorum tank/sccm 16.1G 578G 12.8G /tank/sccm As for the networking, all connections between the X1600, the Blades and the switch are either LACP or Etherchannel bonded 2x 1Gbit links. Switch is a single Cisco 3750. Storage traffic sits on its own VLAN segregated from VM machine traffic.

  Read the article

• choosing the right RAID level

  - by student

  Recently, we bought a "HP-DL380 G6 Server" with 6 146GB (SCSI)HDD for our colleague course management application and website with 10000 daily visitors. we want to choose the best RAID level. how can we choose the right RAID level ? what is the best RAID level for our application ?

  Read the article

• How can I further optimize this color difference function?

  - by aLfa

  I have made this function to calculate color differences in the CIE Lab colorspace, but it lacks speed. Since I'm not a Java expert, I wonder if any Java guru around has some tips that can improve the speed here. The code is based on the matlab function mentioned in the comment block. /** * Compute the CIEDE2000 color-difference between the sample color with * CIELab coordinates 'sample' and a standard color with CIELab coordinates * 'std' * * Based on the article: * "The CIEDE2000 Color-Difference Formula: Implementation Notes, * Supplementary Test Data, and Mathematical Observations,", G. Sharma, * W. Wu, E. N. Dalal, submitted to Color Research and Application, * January 2004. * available at http://www.ece.rochester.edu/~gsharma/ciede2000/ */ public static double deltaE2000(double[] lab1, double[] lab2) { double L1 = lab1[0]; double a1 = lab1[1]; double b1 = lab1[2]; double L2 = lab2[0]; double a2 = lab2[1]; double b2 = lab2[2]; // Cab = sqrt(a^2 + b^2) double Cab1 = Math.sqrt(a1 * a1 + b1 * b1); double Cab2 = Math.sqrt(a2 * a2 + b2 * b2); // CabAvg = (Cab1 + Cab2) / 2 double CabAvg = (Cab1 + Cab2) / 2; // G = 1 + (1 - sqrt((CabAvg^7) / (CabAvg^7 + 25^7))) / 2 double CabAvg7 = Math.pow(CabAvg, 7); double G = 1 + (1 - Math.sqrt(CabAvg7 / (CabAvg7 + 6103515625.0))) / 2; // ap = G * a double ap1 = G * a1; double ap2 = G * a2; // Cp = sqrt(ap^2 + b^2) double Cp1 = Math.sqrt(ap1 * ap1 + b1 * b1); double Cp2 = Math.sqrt(ap2 * ap2 + b2 * b2); // CpProd = (Cp1 * Cp2) double CpProd = Cp1 * Cp2; // hp1 = atan2(b1, ap1) double hp1 = Math.atan2(b1, ap1); // ensure hue is between 0 and 2pi if (hp1 < 0) { // hp1 = hp1 + 2pi hp1 += 6.283185307179586476925286766559; } // hp2 = atan2(b2, ap2) double hp2 = Math.atan2(b2, ap2); // ensure hue is between 0 and 2pi if (hp2 < 0) { // hp2 = hp2 + 2pi hp2 += 6.283185307179586476925286766559; } // dL = L2 - L1 double dL = L2 - L1; // dC = Cp2 - Cp1 double dC = Cp2 - Cp1; // computation of hue difference double dhp = 0.0; // set hue difference to zero if the product of chromas is zero if (CpProd != 0) { // dhp = hp2 - hp1 dhp = hp2 - hp1; if (dhp > Math.PI) { // dhp = dhp - 2pi dhp -= 6.283185307179586476925286766559; } else if (dhp < -Math.PI) { // dhp = dhp + 2pi dhp += 6.283185307179586476925286766559; } } // dH = 2 * sqrt(CpProd) * sin(dhp / 2) double dH = 2 * Math.sqrt(CpProd) * Math.sin(dhp / 2); // weighting functions // Lp = (L1 + L2) / 2 - 50 double Lp = (L1 + L2) / 2 - 50; // Cp = (Cp1 + Cp2) / 2 double Cp = (Cp1 + Cp2) / 2; // average hue computation // hp = (hp1 + hp2) / 2 double hp = (hp1 + hp2) / 2; // identify positions for which abs hue diff exceeds 180 degrees if (Math.abs(hp1 - hp2) > Math.PI) { // hp = hp - pi hp -= Math.PI; } // ensure hue is between 0 and 2pi if (hp < 0) { // hp = hp + 2pi hp += 6.283185307179586476925286766559; } // LpSqr = Lp^2 double LpSqr = Lp * Lp; // Sl = 1 + 0.015 * LpSqr / sqrt(20 + LpSqr) double Sl = 1 + 0.015 * LpSqr / Math.sqrt(20 + LpSqr); // Sc = 1 + 0.045 * Cp double Sc = 1 + 0.045 * Cp; // T = 1 - 0.17 * cos(hp - pi / 6) + // + 0.24 * cos(2 * hp) + // + 0.32 * cos(3 * hp + pi / 30) - // - 0.20 * cos(4 * hp - 63 * pi / 180) double hphp = hp + hp; double T = 1 - 0.17 * Math.cos(hp - 0.52359877559829887307710723054658) + 0.24 * Math.cos(hphp) + 0.32 * Math.cos(hphp + hp + 0.10471975511965977461542144610932) - 0.20 * Math.cos(hphp + hphp - 1.0995574287564276334619251841478); // Sh = 1 + 0.015 * Cp * T double Sh = 1 + 0.015 * Cp * T; // deltaThetaRad = (pi / 3) * e^-(36 / (5 * pi) * hp - 11)^2 double powerBase = hp - 4.799655442984406; double deltaThetaRad = 1.0471975511965977461542144610932 * Math.exp(-5.25249016001879 * powerBase * powerBase); // Rc = 2 * sqrt((Cp^7) / (Cp^7 + 25^7)) double Cp7 = Math.pow(Cp, 7); double Rc = 2 * Math.sqrt(Cp7 / (Cp7 + 6103515625.0)); // RT = -sin(delthetarad) * Rc double RT = -Math.sin(deltaThetaRad) * Rc; // de00 = sqrt((dL / Sl)^2 + (dC / Sc)^2 + (dH / Sh)^2 + RT * (dC / Sc) * (dH / Sh)) double dLSl = dL / Sl; double dCSc = dC / Sc; double dHSh = dH / Sh; return Math.sqrt(dLSl * dLSl + dCSc * dCSc + dHSh * dHSh + RT * dCSc * dHSh); }

  Read the article

• (Ubuntu 10.04 - Windows vista premium on HP pavilion desktop) I reistall my windows, but now i cant

  - by meyosef

  Hi, I had Windows vista premium on HP pavilion desktop. I split disk for ubuntu and make also swap disk part and then i install ubuntu 10.04. To the enterence of my computer after installation i have menu that i can to choose between windows or ubuntu. Today I reistall my windows, but choose menu disapear. I dont see in windows the rdisk part that I give to Ubuntu, soo its mean ubuntu still exist but i cant enter to him. Please help me, Thanks

  Read the article

• Does this laptop have high enough specifications for gaming? [closed]

  - by Grant

  Here's the laptop It wouldn't be hardcore gaming, mostly things like the new Deus Ex game, Mirror's Edge, Portal 2, etc... I need to replace my current, broken, laptop and I thought this would be a good opportunity to get to play some of these games. My current laptop is really only lacking in its graphics card. (Intel series 4 chipset) If this laptop isn't good enough, I would really appreciate suggestions. I won't be able to get a desktop, otherwise I would, and I can't spend more than $1000 dollars on my new laptop.

  Read the article

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• windows vista does not fit my screen

  - by user21613

  The display of windows vista does not fit my laptop screen there are blank areas on both sides

  Read the article

• What is the best PCI card for Win 7, 64 bit machine and LaserJet 1200

  - by MP

  Need 25 pin PCI card that works with Windows 7 and LaserJet.

  Read the article

• Problems mounting HPUX LVM+VXFS filesystem on Linux

  - by golimar

  I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

  Read the article

• DL380 G7: Not able to access ILO on DL380 via ssh from a client

  - by user117140

  I have problem where I can't access my ILO(ssh to ILO IP) thru client which is in different network.I am able to ping ILO IP thru this clinet but ssh access is not possible. Is it possible to have ssh to ILO IP from a client which is in different network? FYI, from the same client I can do ssh to server application IP but ssh to this server ILO IP is not possible. Kindly help? Some more info added: ILO IP address is 10.247.172.70 and its VLAN is different than Client VLAN. Client IP address is 10.247.167.80. ping to ILO IP from this client is possible but not ssh. I can do ssh to ILO IP if I try to do it from the server(hostname:node1) having ILO port or from the other node of this cluster itself,So ssh login is enabled. [root@node1 ~]$ssh -v 10.247.173.70 OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 10.247.173.70 [10.247.173.70] port 22. [root@node1 ~]$ping 10.247.173.70 PING 10.247.173.70 (10.247.173.70) 56(84) bytes of data. 64 bytes from 10.247.173.70: icmp_seq=1 ttl=254 time=0.283 ms 64 bytes from 10.247.173.70: icmp_seq=2 ttl=254 time=0.344 ms 64 bytes from 10.247.173.70: icmp_seq=3 ttl=254 time=0.324 ms 64 bytes from 10.247.173.70: icmp_seq=4 ttl=254 time=0.367 ms

  Read the article

• RAID5 on SmartArray P410i online resize

  - by datacompboy

  I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

  Read the article

• Laptop harddisk produces clicking sound

  - by Alfred James

  This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

  Read the article

• LaserJet M1522nF firmware was corrupted during the update

  - by AAA-Super

  I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the small screen saing HEWLETT-PACKARD After nothing appeared on screen the device seems to be blocked or the firmware was corrupted. Now, how can I reset the update of firmware or how can I reinstall it?

  Read the article

• Parity Initialization after putting in two new disks

  - by lbanz

  All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

  Read the article

• Issue with Capslock key on Laptop

  - by Mr New

  For some reason my laptop has a mind of its own and the Caps Lock tends to come on whenever it feels like it. I thought it was an software issue from that reasoning, but I later cleared the OS and then reinstalled it hoping to fix the problem, but it didn't. Not only does it do that it also comes on and off whenever the letters A, S, and left shift key are pushed. So I assummed it was a keyboard issue and that the keyboard needs to be replaced, but it has one of those touch pad cap lock buttons also, because even when I press that button it tends to not react. So how can that be fixed with a keyboard replacement or is that connected still? EDIT - I followed the direction with the following code in notepad and it didn't do the job: Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout] “Scancode Map”=hex:00000000 00000000 0200000000 00003A00 00000000

  Read the article

• Procurve Primary VLAN

  - by fukawi2

  I'm trying to depreciate usage of VLAN 1 on my ProCurve switches; 1 is unused. I understand that VLAN 1 must exist, but I want to remove it from all ports, especially trunks between switches. The problem I have is that stacking does not seem to work without VLAN 1. I have changed the primary VLAN and management VLAN on all the switches: (config)# primary-vlan 42 (config)# management-vlan 42 (config)# no vlan 1 untagged 25 Port 25 is the link between the 2 switches I'm testing with; the stack master and a member switch; I only want tagged traffic between the switches, no untagged frames. show stacking on the master shows all members as "UP" but I can not telnet any of them: Telnet failed: Connection timed out. All switches have manually assigned (static) IP addresses on VLAN 42, and all exist in the same /25 subnet, as does my desktop. I can telnet the switches directly from my desktop to the individual switch IP addresses, just not from the master switch. Do I need to reboot the switches to have the primary-vlan change take effect? Or is there something else I'm missing?

  Read the article

• Move OS from RAID5 array to RAID 1 arrays

  - by Antoine

  I want to give a last boost to my old ProLiant ML350 G5 server which just needs to be reliable for a few more year only ! With a defined budget of about 1500$ (I do not have more), i plan to replace the CPU (+ adding a second one), the battery cache of my raid controller (E200i), double the RAM, and change all hard drives. I have 7 HDD (SAS 10krpm, 72Gb) + 1 spare in RAID5, and my system is all FULL (no empty tray, full disks). in my current RAID5 array, I have 2 partitions: - 1 OS partition, 20Gb - 1 data partition, 350 Gb I plan to replace these 8 disks with : - 2 x 300Gb SAS 15krpm in RAID 1 (= 1 partition for OS) - 2 x 2Tb SATA 7.2krpm in RAID 1 (= 1 partition for DATA) My biggest constraint is that I have only 01 day to upgrade my server. Therefore, I'm looking for cloning all my files (OS + data partition) to my new arrays, i.e : - the OS partition shall be cloned to the RAID1 "2x300Gb array" - the data partition shall be cloned to the RAID1 "2x2Tb array" My second problem is that I need to physically remove all the old hard drives before inserting the new ones. I'm running Windows Server 2003 R2, and even if MS support will expire soon, I cannot buy a new licence and spent time in configuration. Obviously, with 1500$, I cannot also buy a new server that I could start configuring from now ! Thought about ASR (NTBackup), but I have no floppy drive (and do not really want to invest in one !) Thought about a clonezilla clone, and read this interesting link : Windows Server 2003 - move C: partition to a new SAS disk , but i'm not so confident in using Clonezilla with RAID5. What should be the best option to quickly and easily (if possible!) "copy/paste" my OS (so no need to reinstall and reconfigure all) and DATA / programs / services, etc... ? Thanks for your comments

  Read the article

• upgrading ram to something faster

  - by Mike

  Im going to be adding more ram to a desktop is it poss to go from ddr2 667mhz pc2-5300 to something faster

  Read the article

• Raid5 is off on my Lefthand P4500

  - by Soeren

  I have 1 cluster with serveral p4500. There is HW Raid5 and the Raid5 is split on: first 6 is one raid 5, and the other 6 is one raid 5. There were two disk that came up with a fault. I replaced both disk in same Raid5. Now the storagesystem says that Volumes is unaccessable and the Raid5 of the P4500 is down. How can I get the lefthand up and working again? Ive tried to put the old disk in the P4500 again, but this does not help. I also tryed to restart the disk shelf as well. Do you have any idea? Or something to get it to work again?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >