Search Results

Search found 1031 results on 42 pages for 'lightweight'.

Page 33/42 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• No Telnet login prompt when used over SSH tunnel

  - by SCO

  Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

  Read the article

• New Exchange 2010 CAS cannot find domain controllers

  - by NorbyTheGeek

  I am experiencing problems migrating from Exchange 2003 to Exchange 2010. I am on the first step: installing a new 2010 Client Access Server role. The Active Directory domain functional level is 2003. All domain controllers are 2003 R2. The only existing Exchange 2003 server happens to be housed on one of the domain controllers. It is running Exchange 2003 Standard w/ SP2. IPv6 is enabled and working on all domain controllers, servers, and routers, including this new Exchange server. After installing the CAS role on a new 2008 R2 server (Hyper-V VM) I am receiving 2114 Events: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185, "Microsoft LDAP Error Codes." Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers. Prior to each, I receive the following 2080 Event: Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1600). Exchange Active Directory Provider has discovered the following servers with the following characteristics: (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version) In-site: b.company.intranet CDG 1 0 0 1 0 0 0 0 0 s.company.intranet CDG 1 0 0 1 0 0 0 0 0 Out-of-site: a.company.intranet CD- 1 0 0 0 0 0 0 0 0 o.company.intranet CD- 1 0 0 0 0 0 0 0 0 g.company.intranet CD- 1 0 0 0 0 0 0 0 0 Connectivity between the new Exchange server and all domain controllers via IPv4 and IPv6 are all working. I have verified that the new Exchange server is a member of the following groups: Exchange Servers Exchange Domain Servers Exchange Install Domain Servers Exchange Trusted Subsystem Heck, I even put the new Exchange server into Domain Admins just to see if it would help. It didn't. I can't find any evidence of Active Directory replication problems, all pre-setup Setup tasks (/PrepareLegacyExchangePermissions, /PrepareSchema, /PrepareAD, /PrepareDomain) completed successfully. The only problem so far that I haven't been able to resolve with my Active Directory is I am unable to get my IPv6 subnets into Sites and Services Where should I proceed from here?

  Read the article

• How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

  - by frLich

  I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

  Read the article

• How to run a restricted set of programs with Administrator privileges without giving up Admin acces (Win7 Pro)

  - by frLich

  I have a shared system, running Windows7 X64, restricted to a 'standard user' with no password. Not everyone who has access to the system has the administrator password. This works rather well, except for some applications - specially the unlock-applications for encrypted hard drives/USB flash drives. The specific ones either require Administrator access (eg. Seagate Blackarmor) or simply fail without it -- since these programs are sending raw commands to a device, this is to be expected. I would like to be able to add the hashes of these particular programs to a whitelist, and have them run as administrator without needing any prompts. Since these are by definition on removable media, I can't simply use a filename or even a path. One of the users who shares the system can be considered 'crafty', so anything which temporarily grants administrator rights to an user account is certain to cause problems. What i'd like to be able to do: 1) Create an admin account that can only run programs from a whitelist (or, failing that, from a directory) I can't find a good way to do this: As far as I can tell, SRP applies equally to ALL users? Even if I put a "Deny" token on all directories on the system, such that new directories would inherit it, it could still potentially run things from the mounted USB devices. I also don't know whether it's possible to create a new directory that DOESN'T inherit from the parent, that would lake the deny token, and provide admin access. 2) Find a lightweight service that will run these programs in its local context Windows7 seems to block cross-privilege level communication by default, and I haven't found such for windows 7. One example seems to be "sudo" (http://pages.cpsc.ucalgary.ca/~nfriess/sudo/) but because it uses a WLNOTIFY hook, it won't work under Vista nor Windows7 Non-Solutions: - RunAs: Requires administrator password! (but everyone calls it "sudo" anyway) - RunAs /savecred: Nice idea, but appears to be completely insecure. - RUNASSPC - Same concept as RunAs, uses "encrypted" files with credentials, but checks in user-space. - Scheduled Tasks - "Fixed" permissions make this difficult, and doesn't support interactive processes even if it did. - SuRun: From Google: "Surun uses its own Windows service that adds the user to the group of administrators during program start and removes him automatically from that group again"

  Read the article

• Map a Network Drive from XP to Windows 7

  - by Mysticgeek

  We’ve received a lot of questions about mapping a drive from XP to Windows 7 to access data easily. Today we look at how to map a drive in Windows 7, and how to map to an XP drive from Windows 7. With the new Homegroup feature in Windows 7, it makes sharing data between computers a lot easier. But you might need to map a network drive so you can go directly into a folder to access its contents. Mapping a network drive may sound like “IT talk”, but the process is fairly easy. Map Network Drive in Windows 7 Note: All of the computers used in this article are part of the same workgroup on a home network. In this first example we’re mapping to another Windows 7 drive on the network. Open Computer and from the toolbar click on Map Network Drive. Alternately in Computer you can hit “Alt+T” to pull up the toolbar and click on Tools \ Map Network Drive. Now give it an available drive letter, type in the path or browse to the folder you want to map to. Check the box next to Reconnect at logon if you want it available after a reboot, and click Finish. If both machines aren’t part of the same Homegroup, you may be prompted to enter in a username and password. Make sure and check the box next to Remember my credentials if you don’t want to log in every time to access it. The drive will map and the contents of the folder will open up. When you look in Computer, you’ll see the drive under network location. This process works if you want to connect to a server drive as well. In this example we map to a Home Server drive. Map an XP Drive to Windows 7 There might be times when you need to map a drive on an XP machine on your network. There are extra steps you’ll need to take to make it work however. Here we take a look at the problem you’ll encounter when trying to map to an XP machine if things aren’t set up correctly. If you try to browse to your XP machine you’ll see a message that you don’t have permission. Or if you try to enter in the path directly, you’ll be prompted for a username and password, and the annoyance is, no matter what credentials you put in, you can’t connect. To solve the problem we need to set up the Windows 7 machine as a user on the XP machine and make them part of the Administrators group. Right-click My Computer and select Manage. Under Computer Management expand Local Users and Groups and click on the Users folder. Right-click an empty area and click New User. Add in the user credentials, uncheck User must change password at next logon, then check Password never expires then click Create. Now you see the new user you created in the list. After the user is added you might want to reboot before proceeding to the next step.   Next we need to make the user part of the Administrators group. So go back into Computer Management \ Local Users and Groups \ Groups then double click on Administrators. Click the Add button in Administrators Properties window. Enter in the new user you created and click OK. An easy way to do this is to enter the name of the user you created then click Check Names and the path will be entered in for you. Now you see the user as a member of the Administrators group. Back on the Windows 7 machine we’ll start the process of mapping a drive. Here we’re browsing to the XP Media Center Edition machine. Now we can enter in the user name and password we just created. If you only want to access specific shared folders on the XP machine you can browse to them. Or if you want to map to the entire drive, enter in the drive path where in this example it’s “\\XPMCE\C$” –Don’t forget the “$” sign after the local drive letter. Then login… Again the contents of the drive will open up for you to access. Here you can see we have two drives mapped. One to another Windows 7 machine on the network, and the other one to the XP computer.   If you ever want to disconnect a drive, just right-click on it and then Disconnect. There are several scenarios where you might want to map a drive in Windows 7 to access specific data. It takes a little bit of work but you can map to an XP drive from Windows 7 as well. This comes in handy where you have a network with different versions of Windows running on it. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPMake Vista Index Your Network ConnectionsEasily Backup & Import Your Wireless Network Settings in Windows 7Quickly Open Network Connections List in Windows 7 or VistaHow To Find Drives Easily with Desk Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher

  Read the article

• Integrate Nitro PDF Reader with Windows 7

  - by Matthew Guay

  Would you like a lightweight PDF reader that integrates nicely with Office and Windows 7?  Here we look at the new Nitro PDF Reader, a nice PDF viewer that also lets you create and markup PDF files. Adobe Reader is the de-facto PDF viewer, but it only lets you view PDFs and not much else.  Additionally, it doesn’t fully integrate with 64-bit editions of Vista and Windows 7.  There are many alternate PDF readers, but Nitro PDF Reader is a new entry into this field that offers more features than most PDF readers.  From the creators of the popular free PrimoPDF printer, the new Reader lets you create PDFs from a variety of file formats and markup existing PDFs with notes, highlights, stamps, and more in addition to viewing PDFs.  It also integrates great with Windows 7 using the Office 2010 ribbon interface. Getting Started Download the free Nitro PDF Reader (link below) and install as normal.  Nitro PDF Reader has separate versions for 32 & 64-bit editions of Windows, so download the correct one for your computer. Note:  Nitro PDF Reader is still in Beta testing, so only install if you’re comfortable with using beta software. On first run, Nitro PDF Reader will ask if you want to make it the default PDF viewer.  If you don’t want to, make sure to uncheck the box beside Always perform this check to keep it from opening this prompt every time you use it. It will also open an introductory PDF the first time you run it so you can quickly get acquainted with its features. Windows 7 Integration One of the first things you’ll notice is that Nitro PDF Reader integrates great with Windows 7.  The ribbon interface fits right in with native applications such as WordPad and Paint, as well as Office 2010. If you set Nitro PDF Reader as your default PDF viewer, you’ll see thumbnails of your PDFs in Windows Explorer. If you turn on the Preview Pane, you can read full PDFs in Windows Explorer.  Adobe Reader lets you do this in 32 bit versions, but Nitro PDF works in 64 bit versions too. The PDF preview even works in Outlook.  If you receive an email with a PDF attachment, you can select the PDF and view it directly in the Reading Pane.  Click the Preview file button, and you can uncheck the box at the bottom so PDFs will automatically open for preview if you want.   Now you can read your PDF attachments in Outlook without opening them separately.  This works in both Outlook 2007 and 2010. Edit your PDFs Adobe Reader only lets you view PDF files, and you can’t save data you enter in PDF forms.  Nitro PDF Reader, however, gives you several handy markup tools you can use to edit your PDFs.  When you’re done, you can save the final PDF, including information entered into forms. With the ribbon interface, it’s easy to find the tools you want to edit your PDFs. Here we’ve highlighted text in a PDF and added a note to it.  We can now save these changes, and they’ll look the same in any PDF reader, including Adobe Reader. You can also enter new text in PDFs.  This will open a new tab in the ribbon, where you can select basic font settings.  Select the Click To Finish button in the ribbon when you’re finished editing text.   Or, if you want to use the text or pictures from a PDF in another application, you can choose to extract them directly in Nitro PDF Reader.  Create PDFs One of the best features of Nitro PDF Reader is the ability to create PDFs from almost any file.  Nitro adds a new virtual printer to your computer that creates PDF files from anything you can print.  Print your file as normal, but select the Nitro PDF Creator (Reader) printer. Enter a name for your PDF, select if you want to edit the PDF properties, and click Create. If you choose to edit the PDF properties, you can add your name and information to the file, select the initial view, encrypt it, and restrict permissions. Alternately, you can create a PDF from almost any file by simply drag-and-dropping it into Nitro PDF Reader.  It will automatically convert the file to PDF and open it in a new tab in Nitro PDF. Now from the File menu you can send the PDF as an email attachment so anyone can view it. Make sure to save the PDF before closing Nitro, as it does not automatically save the PDF file.   Conclusion Nitro PDF Reader is a nice alternative to Adobe Reader, and offers some features that are only available in the more expensive Adobe Acrobat.  With great Windows 7 integration, including full support for 64-bit editions, Nitro fits in with the Windows and Office experience very nicely.  If you have tried out Nitro PDF Reader leave a comment and let us know what you think. Link Download Nitro PDF Reader Similar Articles Productive Geek Tips Install Adobe PDF Reader on Ubuntu EdgySubscribe to RSS Feeds in Chrome with a Single ClickChange Default Feed Reader in FirefoxFix for Windows Explorer Folder Pane in XP Becomes Grayed OutRemove "Please wait while the document is being prepared for reading" Message in Adobe Reader 8 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

  - by Jason Fitzpatrick

  You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

  Read the article

• Announcing SonicAgile – An Agile Project Management Solution

  - by Stephen.Walther

  I’m happy to announce the public release of SonicAgile – an online tool for managing software projects. You can register for SonicAgile at www.SonicAgile.com and start using it with your team today. SonicAgile is an agile project management solution which is designed to help teams of developers coordinate their work on software projects. SonicAgile supports creating backlogs, scrumboards, and burndown charts. It includes support for acceptance criteria, story estimation, calculating team velocity, and email integration. In short, SonicAgile includes all of the tools that you need to coordinate work on a software project, get stuff done, and build great software. Let me discuss each of the features of SonicAgile in more detail. SonicAgile Backlog You use the backlog to create a prioritized list of user stories such as features, bugs, and change requests. Basically, all future work planned for a product should be captured in the backlog. We focused our attention on designing the user interface for the backlog. Because the main function of the backlog is to prioritize stories, we made it easy to prioritize a story by just drag and dropping the story from one location to another. We also wanted to make it easy to add stories from the product backlog to a sprint backlog. A sprint backlog contains the stories that you plan to complete during a particular sprint. To add a story to a sprint, you just drag the story from the product backlog to the sprint backlog. Finally, we made it easy to track team velocity — the average amount of work that your team completes in each sprint. Your team’s average velocity is displayed in the backlog. When you add too many stories to a sprint – in other words, you attempt to take on too much work – you are warned automatically: SonicAgile Scrumboard Every workday, your team meets to have their daily scrum. During the daily scrum, you can use the SonicAgile Scrumboard to see (at a glance) what everyone on the team is working on. For example, the following scrumboard shows that Stephen is working on the Fix Gravatar Bug story and Pete and Jane have finished working on the Product Details Page story: Every story can be broken into tasks. For example, to create the Product Details Page, you might need to create database objects, do page design, and create an MVC controller. You can use the Scrumboard to track the state of each task. A story can have acceptance criteria which clarify the requirements for the story to be done. For example, here is how you can specify the acceptance criteria for the Product Details Page story: You cannot close a story — and remove the story from the list of active stories on the scrumboard — until all tasks and acceptance criteria associated with the story are done. SonicAgile Burndown Charts You can use Burndown charts to track your team’s progress. SonicAgile supports Release Burndown, Sprint Burndown by Task Estimates, and Sprint Burndown by Story Points charts. For example, here’s a sample of a Sprint Burndown by Story Points chart: The downward slope shows the progress of the team when closing stories. The vertical axis represents story points and the horizontal axis represents time. Email Integration SonicAgile was designed to improve your team’s communication and collaboration. Most stories and tasks require discussion to nail down exactly what work needs to be done. The most natural way to discuss stories and tasks is through email. However, you don’t want these discussions to get lost. When you use SonicAgile, all email discussions concerning a story or a task (including all email attachments) are captured automatically. At any time in the future, you can view all of the email discussion concerning a story or a task by opening the Story Details dialog: Why We Built SonicAgile We built SonicAgile because we needed it for our team. Our consulting company, Superexpert, builds websites for financial services, startups, and large corporations. We have multiple teams working on multiple projects. Keeping on top of all of the work that needs to be done to complete a software project is challenging. You need a good sense of what needs to be done, who is doing it, and when the work will be done. We built SonicAgile because we wanted a lightweight project management tool which we could use to coordinate the work that our team performs on software projects. How We Built SonicAgile We wanted SonicAgile to be easy to use, highly scalable, and have a highly interactive client interface. SonicAgile is very close to being a pure Ajax application. We built SonicAgile using ASP.NET MVC 3, jQuery, and Knockout. We would not have been able to build such a complex Ajax application without these technologies. Almost all of our MVC controller actions return JSON results (While developing SonicAgile, I would have given my left arm to be able to use the new ASP.NET Web API). The controller actions are invoked from jQuery Ajax calls from the browser. We built SonicAgile on Windows Azure. We are taking advantage of SQL Azure, Table Storage, and Blob Storage. Windows Azure enables us to scale very quickly to handle whatever demand is thrown at us. Summary I hope that you will try SonicAgile. You can register at www.SonicAgile.com (there’s a free 30-day trial). The goal of SonicAgile is to make it easier for teams to get more stuff done, work better together, and build amazing software. Let us know what you think!

  Read the article

• Create an iTunes Account without a credit card

  - by Matthew Guay

  iTunes Store offers a large variety of free content, but to download it you have to have an account. Usually you have to enter your credit card information to sign up, but here’s an easy way to get an iTunes account for free downloads without entering any payment info. Although iTunes Store is known for paid downloads of movies, music, and more, it also has a treasure trove of free media.  Some of it, including Podcasts and iTunes U educational content do not require an account to download.  However, any other free content, including free iPhone/iPod Touch apps and free or promotional music, videos, and TV Shows all require an account to download.  If you try to download a free movie or music download, you will be required to enter payment information. Even though your card will not be charged, it will be kept on file so you can be charged if you download a for-pay item.  However, if you only plan to download free items, it may be preferable to not have your account linked to a credit card. The following steps will get you an account without entering your credit card info. Getting Started First, make sure you have iTunes installed.  If you don’t already have it, download and install it (link below) with the default settings. Now open iTunes, and click the iTunes Store link on the left. Click the App Store link on the top of this page. Select a free app to download.  A simple way to do this is to scroll down to the Top Free Apps box on the right side, hover your mouse over the first item, and click on the Free button that appears when you hover over it. A popup will open asking you to sign in with your Apple ID.  Click “Create New Account”. Click Continue to create your account. Check the box to accept the Store Terms and Conditions, and click Continue.   Enter your email address, password, security question, and date of birth, and uncheck the boxes to get email if you don’t want it…then click Continue. Now, you will be asked to provide a payment method.  Notice now that the last option says None!  Click that bullet option… Then enter your billing address.  Simply enter your normal billing address, even though you are not entering a payment method.  Click Continue and your account will be created! If you get the Address Verification screen just verify your county and click Done. An email will be sent to you to verify your account… Click on the link in your email to verify your account, iTunes will launch and you’re prompted to enter in the Apple ID and Password you just created. Your account is successfully created! Now you can easily download any free media from iTunes.  Keep an eye on the Free on iTunes box on the bottom of the iTunes Store page for interesting downloads, or if you have an iPhone or iPod Touch, watch the popular Free downloads on the Apps page. And of course there is always great content on iTunes U to grab free as well. Purchasing for-pay media If you want to purchase an item on the iTunes store later, simply click on the item to download as normal.  Click Buy to proceed with the purchase. iTunes will prompt you that you need to enter payment information to complete the purchase.  Enter your Apple ID email and password, and then add the payment information as prompted.   Remove Payment Information from an iTunes Account If you’ve already entered payment information into your iTunes account, and would like to remove it, click Store in the top iTunes menu, and select View My Account. Enter your Apple ID email and password, and click View Account.   This will open your account information.  Click the Edit Payment Information button.   Now, click the None button to remove your payment information.  Click Done to save the changes. Your account will now prompt you to enter payment information if you try to make a purchase.  You could repeat these steps after making a purchase if you do not want iTunes to keep your payment info on file. Conclusion This is a great way to make an iTunes account without entering your credit card, or to remove your credit card info from your account.  Parents may especially enjoy this tip, as they can have an iTunes account on their kids computer or iPod Touch without worrying about them spending money with it. Links Download iTunes Similar Articles Productive Geek Tips Quick Tip: Switch Between Signatures in Outlook 2007 the Easy WayRedeem Pre-paid Zune Card Points for Zune Marketplace MediaCreate An Electronic Business Card In Outlook 2007Understanding Windows Vista Aero Glass RequirementsSpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Draw Online using Harmony How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually

  Read the article

• SQL SERVER – PAGELATCH_DT, PAGELATCH_EX, PAGELATCH_KP, PAGELATCH_SH, PAGELATCH_UP – Wait Type – Day 12 of 28

  - by pinaldave

  This is another common wait type. However, I still frequently see people getting confused with PAGEIOLATCH_X and PAGELATCH_X wait types. Actually, there is a big difference between the two. PAGEIOLATCH is related to IO issues, while PAGELATCH is not related to IO issues but is oftentimes linked to a buffer issue. Before we delve deeper in this interesting topic, first let us understand what Latch is. Latches are internal SQL Server locks which can be described as very lightweight and short-term synchronization objects. Latches are not primarily to protect pages being read from disk into memory. It’s a synchronization object for any in-memory access to any portion of a log or data file.[Updated based on comment of Paul Randal] The difference between locks and latches is that locks seal all the involved resources throughout the duration of the transactions (and other processes will have no access to the object), whereas latches locks the resources during the time when the data is changed. This way, a latch is able to maintain the integrity of the data between storage engine and data cache. A latch is a short-living lock that is put on resources on buffer cache and in the physical disk when data is moved in either directions. As soon as the data is moved, the latch is released. Now, let us understand the wait stat type  related to latches. From Book On-Line: PAGELATCH_DT Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Destroy mode. PAGELATCH_EX Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Exclusive mode. PAGELATCH_KP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Keep mode. PAGELATCH_SH Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Shared mode. PAGELATCH_UP Occurs when a task is waiting on a latch for a buffer that is not in an I/O request. The latch request is in Update mode. PAGELATCH_X Explanation: When there is a contention of access of the in-memory pages, this wait type shows up. It is quite possible that some of the pages in the memory are of very high demand. For the SQL Server to access them and put a latch on the pages, it will have to wait. This wait type is usually created at the same time. Additionally, it is commonly visible when the TempDB has higher contention as well. If there are indexes that are heavily used, contention can be created as well, leading to this wait type. Reducing PAGELATCH_X wait: The following counters are useful to understand the status of the PAGELATCH: Average Latch Wait Time (ms): The wait time for latch requests that have to wait. Latch Waits/sec: This is the number of latch requests that could not be granted immediately. Total Latch Wait Time (ms): This is the total latch wait time for latch requests in the last second. If there is TempDB contention, I suggest that you read the blog post of Robert Davis right away. He has written an excellent blog post regarding how to find out TempDB contention. The same blog post explains the terms in the allocation of GAM, SGAM and PFS. If there was a TempDB contention, Paul Randal explains the optimal settings for the TempDB in his misconceptions series. Trace Flag 1118 can be useful but use it very carefully. I totally understand that this blog post is not as clear as my other blog posts. I suggest if this wait stats is on one of your higher wait type. Do leave a comment or send me an email and I will get back to you with my solution for your situation. May the looking at all other wait stats and types together become effective as this wait type can help suggest proper bottleneck in your system. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• Top Tweets SOA Partner Community – November 2011

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity soacommunity SOA Community Dutch ACEs SOA Partner Community award celebration wp.me/p10C8u-i9 OracleBPM Gauging Maturity of your BPM Strategy – part 1/2, bit.ly/vJE9UZ MagicChatzi Dutch ACE’s and ACE Directors had a small party: achatzia.blogspot.com/2011/11/celebr… leonsmiers #Capgemini #Oracle #BPM Blog index bit.ly/tUYtvD #yam lucasjellema Blog post by my colleague Emiel on the AMIS blog: Timeouts in Oracle SOA Suite 11g – tinyurl.com/73amo3r biemond Solving __OAUX_GENXSD_.TOP.XSD with BPEL: When you use an external web service in combination with a BPEL servic… t.co/Gzzatzrr OracleBlogs Jumpstart Fusion Middleware projects with Oracle User Productivity Kit ow.ly/1fJMev cpurdy on Oracle Coherence data grid, its new RESTful APIs, and Oracle Service Bus (OSB): blogs.oracle.com/slc/entry/orac… Accenture Learn how Service-Oriented Architecture can help public service agencies solve legacy system issues. bit.ly/sTteM4 #SOA eelzinga Thanks for organising it Andreas! #soacommunity eelzinga Had a nice drink with the fellow Dutch Oracle ACE members for a little celebration of the SOA Community Partner Award. #soacommunity EmielP Wrote a blogpost about timeouts in the #Oracle #SOA Suite: bit.ly/uhUcrX OracleBlogs Processing Binary Data in SOA Suite 11g t.co/Tzd1xBsY OracleBlogs Finding the Value in SOA by Stephen Bennett t.co/9MMLJoLz OTNArchBeat SOA All the Time; Architects in AZ; Clearing Info Integration hurdles t.co/5viNj8ib OracleBlogs Demo: Business Transaction Management with SOA Management Pack ow.ly/1fFBv3 OTNArchBeat SOA All the Time; Architects in AZ; Clearing Info Integration hurdles t.co/Dnfzo0PN oracletechnet Wikis.oracle.com lives leonsmiers A new #capgemini #oracle #blog, Measuring the Human Task activity in Oracle BPM bit.ly/uPan08 #yam @CapgeminiOracle OTNArchBeat 3 SOA business cases, explained in a 2-minute elevator speech | @JoeMcKendrick t.co/aYGNkZup OTNArchBeat Gartner, Inc. places Oracle SOA Governance in Magic Quadrant for SOA Governance Technologies t.co/bSG5cuTr Jphjulstad Red carpet to Oracle BPM – evita.no evita.no/ikbViewer/soa-… Oracle #Oracle Named a Leader in #SOA Governance Magic Quadrant by Leading Analyst Firm t.co/prnyGu2U soacommunity What presentations & topics do you like to see at the next SOA & BPM & Webcenter Community Forum early 2012? #soacommunity soacommunity Oracle BPM Suite 11g Handbook Released wp.me/p10C8u-hU OTNArchBeat SOA Development Virtual Developer Day (On Demand) | @soacommunity bit.ly/sqhQmX OracleBlogs SOA Development Virtual Developer Day (On Demand) t.co/MDrdnx0h 9 Nov Favorite Undo Retweet Reply OracleBlogs Specialized Partners Only! New Service to Promote Your Events t.co/qTgyEpY4 biemond @stevendavelaar this is for you t.co/hInKCcfY it explains your sso problem soacommunity SOA Development Virtual Developer Day (on demand) t.co/flXPWk4R soacommunity IPT Swiss SOA Experts – thanks for the nice ink wp.me/p10C8u-i3 soacommunity Enjoy #wjax specially the presentations from our #ACE @t_winterberg @myfear @AdamBien pic.twitter.com/m8VcBSG3 OTNArchBeat Discounts on books, more, for Oracle Technology Network members bit.ly/vRxMfB OracleSOA Justify the ROI of SOA in 10 seconds…a pic is worth 1000 words bit.ly/roi_of_soa_img #oraclesoa #soa #oow11 orclateamsoa A-Team SOA Blog: Case Management in BPM 11g -  Mark Foster Oracle BPM 11g & Case Management I’ve seen… t.co/l5zb6pFr t_winterberg Die nächste SIG #SOA steht an: 7.12. in Hamburg. Neues Tooling und Erfahrungen rund um Oracle FMW, SOA, BPM… (cont) deck.ly/~YC57v OracleBlogs Continuous Integration for SOA/BPM ow.ly/1fsekI OracleBlogs BPM Suite 11g Handbook Released ow.ly/1frlzv lucasjellema Iterating over collection (array) in BPM (and dispatching jobs for entries in array): t.co/1SEhSvWv – subprocesses are the key. lucasjellema Lucas Jellema Useful tip from Mark Nelson: BPM API documentation (as well as Human Workflow Service) available: redstack.wordpress.com/2011/09/28/api… OTNArchBeat SOA, cloud: it’s the architecture that matters | Joe McKendrick zd.net/tNCiTF orclateamsoa: Building a job dispatcher in BPM -or- Iterating over collections in BPM ow.ly/1frbrz orclateamsoa Using the Database as a Policy Store for SOA 11g ow.ly/1frbrA OracleBPM Oracle launches Process Accelerators for BPM: t.co/XPEE61QL Jphjulstad Human-Centric BPM Selection Checklist t.co/3TZXZHLH OracleBlogs Fusion Middleware General Session at OOW 2011: Missed It? Read On… t.co/aU5JvM6K gschmutz Great! The product page of the OSB 11g Development Cookbook is now online: t.co/5Jfbe6Ng Looking forward to get it, u too? brhubart Oracle IT Architecture Essentials; Lightweight Composite Service Development with SCA and Spring; Cloud Migration ow.ly/7esNg eelzinga New blogpost : Oracle Service Bus, Generic fault handling, bit.ly/sGr4UL #osb #oracleservicebus For regular information on Oracle SOA Suite become a member in the SOA Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Technorati Tags: soacommunity,twitter,Oracle,SOA Community,Jürgen Kress,OPN

  Read the article

• ASP.NET MVC 3 Hosting :: ASP.NET MVC 3 First Look

  - by mbridge

  MVC 3 View Enhancements MVC 3 introduces two improvements to the MVC view engine: - Ability to select the view engine to use. MVC 3 allows you to select from any of your  installed view engines from Visual Studio by selecting Add > View (including the newly introduced ASP.NET “Razor” engine”): - Support for the next ASP.NET “Razor” syntax. The newly previewed Razor syntax is a concise lightweight syntax. MVC 3 Control Enhancements - Global Filters: ASP.NET MVC 3  allows you to specify that a filter which applies globally to all Controllers within an app by adding it to the GlobalFilters collection.  The RegisterGlobalFilters() method is now included in the default Global.asax class template and so provides a convenient place to do this since is will then be called by the Application_Start() method: void RegisterGlobalFilters(GlobalFilterCollection filters) { filters.Add(new HandleLoggingAttribute()); filters.Add(new HandleErrorAttribute()); } void Application_Start() { RegisterGlobalFilters (GlobalFilters.Filters); } - Dynamic ViewModel Property : MVC 3 augments the ViewData API with a new “ViewModel” property on Controller which is of type “dynamic” – and therefore enables you to use the new dynamic language support in C# and VB pass ViewData items using a cleaner syntax than the current dictionary API. Public ActionResult Index() { ViewModel.Message = "Hello World"; return View(); } - New ActionResult Types : MVC 3 includes three new ActionResult types and helper methods: 1. HttpNotFoundResult – indicates that a resource which was requested by the current URL was not found. HttpNotFoundResult will return a 404 HTTP status code to the calling client. 2. PermanentRedirects – The HttpRedirectResult class contains a new Boolean “Permanent” property which is used to indicate that a permanent redirect should be done. Permanent redirects use a HTTP 301 status code.  The Controller class  includes three new methods for performing these permanent redirects: RedirectPermanent(), RedirectToRoutePermanent(), andRedirectToActionPermanent(). All  of these methods will return an instance of the HttpRedirectResult object with the Permanent property set to true. 3. HttpStatusCodeResult – used for setting an explicit response status code and its associated description. MVC 3 AJAX and JavaScript Enhancements MVC 3 ships with built-in JSON binding support which enables action methods to receive JSON-encoded data and then model-bind it to action method parameters. For example a jQuery client-side JavaScript could define a “save” event handler which will be invoked when the save button is clicked on the client. The code in the event handler then constructs a client-side JavaScript “product” object with 3 fields with their values retrieved from HTML input elements. Finally, it uses jQuery’s .ajax() method to POST a JSON based request which contains the product to a /theStore/UpdateProduct URL on the server: $('#save').click(function () { var product = { ProdName: $('#Name').val() Price: $('#Price').val(), } $.ajax({ url: '/theStore/UpdateProduct', type: "POST"; data: JSON.stringify(widget), datatype: "json", contentType: "application/json; charset=utf-8", success: function () { $('#message').html('Saved').fadeIn(), }, error: function () { $('#message').html('Error').fadeIn(), } }); return false; }); MVC will allow you to implement the /theStore/UpdateProduct URL on the server by using an action method as below. The UpdateProduct() action method will accept a strongly-typed Product object for a parameter. MVC 3 can now automatically bind an incoming JSON post value to the .NET Product type on the server without having to write any custom binding. [HttpPost] public ActionResult UpdateProduct(Product product) { // save logic here return null } MVC 3 Model Validation Enhancements MVC 3 builds on the MVC 2 model validation improvements by adding   support for several of the new validation features within the System.ComponentModel.DataAnnotations namespace in .NET 4.0: - Support for the new DataAnnotations metadata attributes like DisplayAttribute. - Support for the improvements made to the ValidationAttribute class which now supports a new IsValid overload that provides more info on  the current validation context, like what object is being validated. - Support for the new IValidatableObject interface which enables you to perform model-level validation and also provide validation error messages which are specific to the state of the overall model. MVC 3 Dependency Injection Enhancements MVC 3 includes better support for applying Dependency Injection (DI) and also integrating with Dependency Injection/IOC containers. Currently MVC 3 Preview 1 has support for DI in the below places: - Controllers (registering & injecting controller factories and injecting controllers) - Views (registering & injecting view engines, also for injecting dependencies into view pages) - Action Filters (locating and  injecting filters) And this is another important blog about Microsoft .NET and technology: - Windows 2008 Blog - SharePoint 2010 Blog - .NET 4 Blog And you can visit here if you're looking for ASP.NET MVC 3 hosting

  Read the article

• Using real fonts in HTML 5 & CSS 3 pages

  - by nikolaosk

  This is going to be the fifth post in a series of posts regarding HTML 5. You can find the other posts here, here , here and here.In this post I will provide a hands-on example on how to use real fonts in HTML 5 pages with the use of CSS 3.Font issues have been appearing in all websites and caused all sorts of problems for web designers.The real problem with fonts for web developers until now was that they were forced to use only a handful of fonts.CSS 3 allows web designers not to use only web-safe fonts.These fonts are in wide use in most user's operating systems.Some designers (when they wanted to make their site stand out) resorted in various techniques like using images instead of fonts. That solution is not very accessible-friendly and definitely less SEO friendly.CSS (through CSS3's Fonts module) 3 allows web developers to embed fonts directly on a web page.First we need to define the font and then attach the font to elements.Obviously we have various formats for fonts. Some are supported by all modern browsers and some are not.The most common formats are, Embedded OpenType (EOT),TrueType(TTF),OpenType(OTF). I will use the @font-face declaration to define the font used in this page.  Before you download fonts (in any format) make sure you have understood all the licensing issues. Please note that all these real fonts will be downloaded in the client's computer.A great resource on the web (maybe the best) is http://www.typekit.com/.They have an abundance of web fonts for use. Please note that they sell those fonts.Another free (best things in life a free, aren't they?) resource is the http://www.google.com/webfonts website. I have visited the website and downloaded the Aladin webfont.When you download any font you like make sure you read the license first. Aladin webfont is released under the Open Font License (OFL) license. Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for web fonts from the latest versions of modern browsers.Please have a look at the picture below. We see that all the latest versions of modern browsers support this feature. In order to be absolutely clear this is not (and could not be) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.I create a simple HTML 5 page. The markup follows and it is very easy to use and understand<!DOCTYPE html><html lang="en">  <head>    <title>HTML 5, CSS3 and JQuery</title>    <meta http-equiv="Content-Type" content="text/html;charset=utf-8" >    <link rel="stylesheet" type="text/css" href="style.css">       </head>  <body>      <div id="header">      <h1>Learn cutting edge technologies</h1>      <p>HTML 5, JQuery, CSS3</p>    </div>        <div id="main">          <h2>HTML 5</h2>                        <p>            HTML5 is the latest version of HTML and XHTML. The HTML standard defines a single language that can be written in HTML and XML. It attempts to solve issues found in previous iterations of HTML and addresses the needs of Web Applications, an area previously not adequately covered by HTML.          </p>      </div>             </body>  </html> Then I create the style.css file.<style type="text/css">@font-face{font-family:Aladin;src: url('Aladin-Regular.ttf')}h1{font-family:Aladin,Georgia,serif;}</style> As you can see we want to style the h1 tag in our HTML 5 markup.I just use the @font-face property,specifying the font-family and the source of the web font. Then I just use the name in the font-family property to style the h1 tag.Have a look below to see my page in IE10. Make sure you open this page in all your browsers installed in your machine. Make sure you have downloaded the latest versions. Now we can make our site stand out with web fonts and give it a really unique look and feel. Hope it helps!!!  

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• IBM Keynote: (hardware,software)–>{IBM.java.patterns}

  - by Janice J. Heiss

  On Sunday evening, September 30, 2012, Jason McGee, IBM Distinguished Engineer and Chief Architect Cloud Computing, along with John Duimovich IBM Distinguished Engineer and Java CTO, gave an information- and idea-rich keynote that left Java developers with much to ponder.Their focus was on the challenges to make Java more efficient and productive given the hardware and software environments of 2012. “One idea that is very interesting is the idea of multi-tenancy,” said McGee, “and how we can move up the spectrum. In traditional systems, we ran applications on dedicated middleware, operating systems and hardware. A lot of customers still run that way. Now people introduce hardware virtualization and share the hardware. That is good but there is a lot more we can do. We can share middleware and the application itself.” McGee challenged developers to better enable the Java language to function in these higher density models. He spoke about the need to describe patterns that help us grasp the full environment that an application needs, whether it’s a web or full enterprise application. Developers need to understand the resources that an application interacts with in a way that is simple and straightforward. The task is to then automate that deployment so that the complexity of infrastructure can be by-passed and developers can live in a simpler world where the cloud can automatically configure the needed environment. McGee argued that the key, something IBM has been working on, is to use a simpler pattern that allows a cloud-based architecture to embrace the entire infrastructure required for an application and make it highly available, scalable and able to recover from failure. The cloud-based architecture would automate the complexity of setting up and managing the infrastructure. IBM has been trying to realize this vision for customers so they can describe their Java application environment simply and allow the cloud to automate the deployment and management of applications. “The point,” explained McGee, “is to package the executable used to describe applications, to drop it into a shared system and let that system provide some intelligence about how to deploy and manage those applications.”John Duimovich on Improvements in JavaMcGee then brought onstage IBM’s Distinguished Engineer and CTO for Java, John Duimovich, who showed the audience ways to deploy Java applications more efficiently.Duimovich explained that, “When you run lots of copies of Java in the cloud or any hypervisor virtualized system, there are a lot of duplications of code and jar files. IBM has a facility called ‘shared classes’ where we put shared code, read only artefacts in a cache that is sharable across hypervisors.” By putting JIT code in ahead of time, he explained that the application server will use 20% less memory and operate 30% faster.  He described another example of how the JVM allows for the maximum amount of sharing that manages the tenants and file sockets and memory use through throttling and control. Duimovich touched on the “thin is in” model and IBM’s Liberty Profile and lightweight runtime for the cloud, which allows for greater efficiency in interacting with the cloud.Duimovich discussed the confusion Java developers experience when, for example, the hypervisor tells them that that they have 8 and then 4 and then 16 cores. “Because hypervisors are virtualized, they can change based on resource needs across the hypervisor layer. You may have 10 instances of an operation system and you may need to reallocate memory, " explained Duimovich.  He showed how to resize LPARs, reallocate CPUs and migrate applications as needed. He explained how application servers can resize thread pools and better use resources based on information from the hypervisors.Java Challenges in Hardware and SoftwareMcGee ended the keynote with a summary of upcoming hardware and software challenges for the Java platform. He noted that one reason developers love Java is it allows them to ignore differences in hardware. He stated that the most important things happening in hardware were in network and storage – in developments such as the speed of SSD, the exploitation of high-speed, low-latency networking, and recent developments such as storage-class memory, and non-volatile main memory. “So we are challenged to maintain the benefits of Java and the abstraction it provides from hardware while still exploiting the new innovations in hardware,” said McGee.McGee discussed transactional messaging applications where developers send messages transactionally persist a message to storage, something traditionally done by backing messages on spinning disks, something mostly outdated. “Now,” he pointed out, “we would use SSD and store it in Flash and get 70,000 messages a second. If we stored it using a PCI express-based flash memory device, it is still Flash but put on a PCI express bus on a card closer to the CPU. This way I get 300,000 messages a second and 25% improvement in latency.” McGee’s central point was that hardware has a huge impact on the performance and scalability of applications. New technologies are enabling developers to build classes of Java applications previously unheard of. “We need to be able to balance these things in Java – we need to maintain the abstraction but also be able to exploit the evolution of hardware technology,” said McGee. According to McGee, IBM's current focus is on systems wherein hardware and software are shipped together in what are called Expert Integrated Systems – systems that are pre-optimized, and pre-integrated together. McGee closed IBM’s engaging and thought-provoking keynote by pointing out that the use of Java in complex applications is increasingly being augmented by a host of other languages with strong communities around them – JavaScript, JRuby, Scala, Python and so forth. Java developers now must understand the strengths and weaknesses of such newcomers as applications increasingly involve a complex interconnection of languages.

  Read the article

• Open World Day 3

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part IV My third day was exhibition day for me!  I took the opportunity to wander around the JavaOne and OpenWorld exhibitions to see what might be useful for me when selling WebLogic, Coherence & SOA Suite.  I found a number of interesting vendors and thought I would share what I found here.  These are not necessarily endorsements, but observations on companies that I thought had interesting looking products that fill a need I have seen at customers. Highly Available EBS Upgrades A few years ago I worked with a customer that was a port authority.  They wanted to tie E-Business Suite into their operations to provide faster processing of cargo and passengers.  However they only had a 2 hour downtime window to perform upgrades.  This was not a problem for core database and middleware technology, this could accommodate those upgrade timescales easily.  It was a problem for EBS however so I intrigued to find Rapid E-Suite Inc offering an 11i to 12i upgrade service that claims to require no outage.  This could be a real boon to EBS customers like my port friends that need to upgrade without disruption to their business. Mobile on WebLogic I have come across a number of customers who want a comprehensive mobile solution, connected and disconnected operation and so forth.  ADF only addresses part of these requirements currently so I was excited to discover mFrontiers Inc offering an apparently comprehensive solution that should integrate easily with Oracle SOA Suite to mobile enable a SOA infrastructure.  The ability to operate without a network is important for many applications, particularly in industries that require their engineers to enter buildings to perform maintenance or repairs, because network access is not always available – many of my colleagues don’t have mobile access from their homes because they live in the middle of nowhere – and disconnected support is crucial in these situations. Sharepoint Connector for WebCenter Content Obviously Sharepoint is an evil pernicious intrusion into a companies IT estate but it is widely deployed and many people like it but also would like to take advantage of Oracle products such as WebCenter Content.  So I was encouraged to see that Fishbowl Solutions have created a connector for Sharepoint that allows it to bring in content from WebCenter, it looks like a valuable way to maintain the Sharepoint interface end users are used to but extend the range of content by pulling stuff (technical term for content) from WebCenter.   Load Balancing The Enterprise Deployment Guides are Oracles bible on building highly available FMW environments, and each of them requires a front end load balancer.  I have been asked to help configure F5 Load Balancers on a number of occasions over my time at Oracle and each time I come back to it I find more useful features have been added to the BigIP line of load balancers that F5 sell, many of their documents are tailored to FMW.  I like F5, they provide (relatively) easy to use products that do what they say on the side of the box.  They may not have all the bells and whistles of some of their more expensive competitors but they do the job and do it well!  Besides which I like their logo! Other Stuff I saw lots of other interesting products and services, such as a lightweight monitoring tool for Coherence, Forms migration services, JCAPS migration services and lots of cool freebies to take home to the children! A Quiet Night Wednesday night was the partner appreciation event and I had decided to go back to the hotel and have an early night.  I decided to attend the last session of the day – a Maven/Hudson/WebLogic tutorial.  I got the wrong hotel for the session and snuck in 20 minutes late at the back and starting working on the hands on workshop.  One of my co-attendees raised his hand for help and as the presenter came over to help he suddenly stopped and yelled – “Is that Antony”!  It was my old friend Steve Button who used to be based in Redwood Shores but is now a WebLogic guru PM in Australia.  It was good to catch up with him.  As he yelled out a guy with really bad posture turned around to see who he was talking to, this turned out to be my friend Simon Haslan, Oracle ACE from the UK.  After the tutorial Simon and I retired to the coffee shop to catch up and share stories.  2 and half hours later we decided it was time to retire, so much for an early night but great to renew old friendships and find out what real customers are worrying about.

  Read the article

• ASP.NET WebAPI Security 4: Examples for various Authentication Scenarios

  - by Your DisplayName here!

  The Thinktecture.IdentityModel.Http repository includes a number of samples for the various authentication scenarios. All the clients follow a basic pattern: Acquire client credential (a single token, multiple tokens, username/password). Call Service. The service simply enumerates the claims it finds on the request and returns them to the client. I won’t show that part of the code, but rather focus on the step 1 and 2. Basic Authentication This is the most basic (pun inteneded) scenario. My library contains a class that can create the Basic Authentication header value. Simply set username and password and you are good to go. var client = new HttpClient { BaseAddress = _baseAddress }; client.DefaultRequestHeaders.Authorization = new BasicAuthenticationHeaderValue("alice", "alice"); var response = client.GetAsync("identity").Result; response.EnsureSuccessStatusCode();   SAML Authentication To integrate a Web API with an existing enterprise identity provider like ADFS, you can use SAML tokens. This is certainly not the most efficient way of calling a “lightweight service” ;) But very useful if that’s what it takes to get the job done. private static string GetIdentityToken() {     var factory = new WSTrustChannelFactory(         new WindowsWSTrustBinding(SecurityMode.Transport),         _idpEndpoint);     factory.TrustVersion = TrustVersion.WSTrust13;     var rst = new RequestSecurityToken     {         RequestType = RequestTypes.Issue,         KeyType = KeyTypes.Bearer,         AppliesTo = new EndpointAddress(Constants.Realm)     };     var token = factory.CreateChannel().Issue(rst) as GenericXmlSecurityToken;     return token.TokenXml.OuterXml; } private static Identity CallService(string saml) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("SAML", saml);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   SAML to SWT conversion using the Azure Access Control Service Another possible options for integrating SAML based identity providers is to use an intermediary service that allows converting the SAML token to the more compact SWT (Simple Web Token) format. This way you only need to roundtrip the SAML once and can use the SWT afterwards. The code for the conversion uses the ACS OAuth2 endpoint. The OAuth2Client class is part of my library. private static string GetServiceTokenOAuth2(string samlToken) {     var client = new OAuth2Client(_acsOAuth2Endpoint);     return client.RequestAccessTokenAssertion(         samlToken,         SecurityTokenTypes.Saml2TokenProfile11,         Constants.Realm).AccessToken; }   SWT Authentication When you have an identity provider that directly supports a (simple) web token, you can acquire the token directly without the conversion step. Thinktecture.IdentityServer e.g. supports the OAuth2 resource owner credential profile to issue SWT tokens. private static string GetIdentityToken() {     var client = new OAuth2Client(_oauth2Address);     var response = client.RequestAccessTokenUserName("bob", "abc!123", Constants.Realm);     return response.AccessToken; } private static Identity CallService(string swt) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("Bearer", swt);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   So you can see that it’s pretty straightforward to implement various authentication scenarios using WebAPI and my authentication library. Stay tuned for more client samples!

  Read the article

• Design review for application facing memory issues

  - by Mr Moose

  I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

  Read the article

• Oracle GoldenGate 12c - Leading Enterprise Replication

  - by Doug Reid

  Oracle GoldenGate 12c released  on October 17th and includes several new cutting edge features that firmly establishes GoldenGate's leader position in the data replication space.   In fact, this release more than doubles the performance of data delivery, supports Oracle's new multitenant database feature,  it's more secure, has more options for high availability, and has made great strides to simplify the configuration and deployment of the product.     Read through the press release if you haven't already and do not miss the quote from Cern's Eva Dafonte Perez, regarding Oracle GoldenGate 12c "….performs five times faster compared to previous GoldenGate versions and simplifies the management of a multi-tier environment" There are a variety of new and improved features in the Oracle GoldenGate 12c.  Here are the highlights: Optimized for Oracle Database 12c -  GoldenGate 12c is custom tailored to the unique capabilities of Oracle database 12c and out of the box GoldenGate 12c supports multitenant (pluggable database (PDB)) and non-consolidated deployments of Oracle Database 12c.   The naming convention used by database 12c is now in three parts (PDB-name, schema-name, and object name).  We have made changes to the GoldenGate capture process to support the new naming convention and streamlined the whole process so a single GoldenGate capture process is being used at the container level rather than at each individual PDB.  By having the capture process at the container level resource usage and the number of processes are reduced. To view a conceptual architecture diagram click here. Integrated Delivery for the Oracle Database - Leveraging a lightweight streaming API built exclusively for Oracle GoldenGate 12c, this process distributes load, auto tunes the degree of parallelism, scales better, and delivers blinding rates of changed data delivery to the Oracle database.  One of the goals for Oracle GoldenGate 12c was to reduce IT costs by simplifying the configuration and reduce the time to manage complex infrastructures.  In previous versions of Oracle GoldenGate, customers would split transaction loads by grouping tables into multiple different delivery processes (click here to view the previous method). Each delivery process executed independently and without any interaction or knowledge of other delivery processes.  This setup was complicated to configure and time consuming as the developer needed in-depth knowledge of the source and target schemas and the transaction profile. With GoldenGate 12c and Integrated Delivery we have made it easier to configure and faster to deploy.  To view a conceptual architecture diagram of integrated delivery click here Coordinated Delivery for Non-Oracle Databases - Coordinated Delivery orchestrates high-speed apply processes and simplifies the configuration of GoldenGate for non-Oracle targets. In Oracle GoldenGate 12c a single delivery process is used with multiple threads (click here) and key events, such as primary key updates, event markers, DDL, etc, are coordinated between the various threads to insure that the transactions are applied in the same sequence as they were captured, all while delivery improved performance.  Replication Between On-Premises and Cloud-Based systems. - The trend for business to utilize both on-premises and cloud-based systems is rising and businesses need to replicate data back and forth.   GoldenGate 12c can be configured in a variety of ways to provide real-time replication when unrestricted or restricted (limited ports or HTTP tunneling) networks are between on-premises and cloud-based systems.    Expanded Heterogeneity - It wouldn't be a GoldenGate release without new and improved platform support.   Release 1 includes support for MySQL 5.6 and Sybase 15.7.   Upcoming in the next release GoldenGate, support will be expanded for MS SQL Server, DB2, and Teradata. Tighter Security - Oracle GoldenGate 12c is integrated with the Oracle wallet to shield usernames and passwords using strong encryption and aliases.   Customers accustomed to using the Oracle Wallet with other Oracle products will instantly be familiar with how to use this great new feature Expanded Oracle Application and Technology Support -   GoldenGate can be used along with Oracle Coherence to enable real-time changed data feeds to the Coherence cache using Toplink and the Oracle GoldenGate JMS adapter.     Plus,  Oracle Advanced Customer Services (ACS) now offers a low downtime E-Business Suite platform and database migrations using GoldenGate as the enabling technology.  Keep tuned for more blogs on the new features and the upcoming launch webcast where we will go into these new features in more detail.   In the mean time make sure to read through our white paper "Oracle GoldenGate 12c Release 1 New Features Overview"

  Read the article

• Unable to set maxReceivedMessageSize through web.config

  - by Michael Mortensen

  Hello there, I have now investigated the 400 - BadRequest code for the last two hours. A lot of sugestions goes towards ensuring the bindingConfiguration attribute is set correctly, and in my case, it is. Now, I need YOUR help before destroying the building i am in :-) I run a WCF RestFull service (very lightweight, using this resource for inspiration: http://msdn.microsoft.com/en-us/magazine/dd315413.aspx) which (for now) accepts an XmlElement (POX) provided through the POST verb. I am currently ONLY using Fiddler's request builder before implementing a true client (as this is mixed environments). When I do this for XML smaller than 65K, it works fine - larger, it throws this exception: The maximum message size quota for incoming messages (65536) has been exceeded. To increase the quota, use the MaxReceivedMessageSize property on the appropriate binding element. Here is my web.config file (which I even included the client-tag for (desperate times!)): <system.web> <httpRuntime maxRequestLength="1500000" executionTimeout="180"/> </system.web> <system.serviceModel> <diagnostics> <messageLogging logEntireMessage="true" logMalformedMessages="true" logMessagesAtServiceLevel="true" logMessagesAtTransportLevel="true" /> </diagnostics> <bindings> <webHttpBinding> <binding name="WebHttpBinding" maxReceivedMessageSize="1500000" maxBufferPoolSize="1500000" maxBufferSize="1500000" closeTimeout="00:03:00" openTimeout="00:03:00" receiveTimeout="00:10:00" sendTimeout="00:03:00"> <readerQuotas maxStringContentLength="1500000" maxArrayLength="1500000" maxBytesPerRead="1500000" /> <security mode="None"/> </binding> </webHttpBinding> </bindings> <client> <endpoint address="" binding="webHttpBinding" bindingConfiguration="WebHttpBinding" contract="Commerce.ICatalogue"/> </client> <services> <service behaviorConfiguration="ServiceBehavior" name="Catalogue"> <endpoint address="" behaviorConfiguration="RestFull" binding="webHttpBinding" bindingConfiguration="WebHttpBinding" contract="Commerce.ICatalogue" /> <!-- endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" / --> </service> </services> <behaviors> <endpointBehaviors> <behavior name="RestFull"> <webHttp/> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceDebug httpHelpPageEnabled="true" includeExceptionDetailInFaults="true"/> <serviceMetadata httpGetEnabled="true"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Thanks in advance for any help leading to succesfull call with 65K XML ;-)

  Read the article

• Removing expired certificates from LDS (new ver of ADAM)

  - by jonthebrewer

  Hi all. This is my situation: We are in the process of replacing a certificate store currently hosted on Sun's iPlanet with Microsoft's Lightweight Directory Services (new version of ADAM with Server 2008). These certificates have been imported into LDS into an application partition (say o=myorg, C=AU). Under this structure I have around 40,000 OU's each one representing a customer under each customers OU are one or more user (iNetOrg) objects (around 60,000 in all). In each user are one or more certificates in the UserCertificate attribute. A combination of in-house written application code and proprietory PKI code reads and publishes these certficates to validate financial transactions. As the LDAP path of the certificates is stored within the customer certificates (and within the application code) and there is zero appetite for changing any of the code, I have had to pick up the iPlanet directory as a whole and dump it in LDS in the same structure. (I will not be using or hosting a Microsoft CA, just implementing an LDAP compliant directory to host these certificates) We have fully tested the application using the data in LDS and everything works fine - here is my dilema and question (finally, phew!) There was no process put in place for removing revoked or expired certificates, consequently the vast majority of the data is completely useless, the system has been running for about 8 years! I have done a quick analysis and I estimate that at least 80% of the data is no longer valid. As I am taking on responsibility for managing the directory I would like to start with a clean directory. Does anyone have any idea how I can cleanup these expired certificates. I am not a highly experienced scripter but have some background in VB. I have been researching the use of CAPICOM and have a feeling this may be able to be used but in exactly what way I am not sure?? I would prefer to write a script that I could specify an expiration date (say any certs that expired prior to 2010) then run against the LDS paritition. This way I can reuse the script periodically to cleanup the directory (as mentioned above - I have no way to adjust the applications that are writing the certs, this is with a third party). Another, less attractive, alternative is to massage the LDIF file (2.7 million lines!) to rip the certs out prior to the import Any help and advice MUCH appreciated. Cheers Jon

  Read the article

• Use bug tracker to get things done and manage personal tasks?

  - by Frank

  This is slightly off-topic, but can only be answered by programmers and is useful to many programmers: Do you think it is useful to use a bug tracking system to keep track of personal todo items and to Get Things Done? I have not tried that; in fact, I don't have much experience with bug tracking systems. For my todo lists, I have played around with Google Tasks and Remember The Milk, but both of them have shortcomings: Google Tasks: I like that you can create todo lists easily, can reorder items in the list and easily create hierarchies. But it is way too simplistic and does not allow to tag tasks or move tasks from one list to another. Remember The Milk: It is nice and sleek, but you cannot create hierarchies of tasks, cannot arbitrarily reorder tasks and cannot set dependencies of tasks. That's where a bug tracking system should come in: Since I think (maybe too much?) like a programmer, my tasks have a natural hierarchy and a tree of dependencies, like in a Makefile. Here are two examples: The task of writing my thesis is done when several milestones are done. Some of these milestones can run in parallel (writing background chapter, running experiments A, running experiments B), others depend on each other (writing main chapter depends on first getting results from experiments A). The same is true for more personal goals: I want to host a dinner party, which requires finding a good date, finishing the guest list, making invitations, finding nice recipes, cooking, ... For me, all these tasks involve hierarchical dependencies and milestones that bug tracking systems should be able to handle? Here is an article that explains how to do advanced GTD with Remember The Milk, but he has to use several workarounds: (1) add a general tag 'wait' to tasks that are waiting for others to be completed but you cannot enter the IDs of the tasks that they are waiting for, (2) starting some special tasks with "." so that they are at the top of the alphabetically sorted list and signal that others are 'below' it as subgoals. Bug tracking systems should be able to handle these things much more naturally? Does anyone have experience and can recommend a lightweight bug tracking system that might be good for this? Other requirements: Should run as web app, should allow me to tag a task with several tags (like 'work', 'fun', 'short-task', 'errands', ...).

  Read the article

• System architecture: simple approach for setting up background tasks behind a web application -- wil

  - by Tim Molendijk

  I have a Django web application and I have some tasks that should operate (or actually: be initiated) on the background. The application is deployed as follows: apache2-mpm-worker; mod_wsgi in daemon mode (1 process, 15 threads). The background tasks have the following characteristics: they need to operate in a regular interval (every 5 minutes or so); they require the application context (i.e. the application packages need to be available in memory); they do not need any input other than database access, in order to perform some not-so-heavy tasks such as sending out e-mail and updating the state of the database. Now I was thinking that the most simple approach to this problem would be simply to piggyback on the existing application process (as spawned by mod_wsgi). By implementing the task as part of the application and providing an HTTP interface for it, I would prevent the overhead of another process that is holding all of the application into memory. A simple cronjob can be setup that sends a request to this HTTP interface every 5 minutes and that would be it. Since the application process provides 15 threads and the tasks are quite lightweight and only running every 5 minutes, I figure they would not be hindering the performance of the web application's user-facing operations. Yet... I have done some online research and I have seen nobody advocating this approach. Many articles suggest a significantly more complex approach based on a full-blown messaging component (such as Celery, which uses RabbitMQ). Although that's sexy, it sounds like overkill to me. Some articles suggest setting up a cronjob that executes a script which performs the tasks. But that doesn't feel very attractive either, as it results in creating a new process that loads the entire application into memory, performs some tiny task, and destroys the process again. And this is repeated every 5 minutes. Does not sound like an elegant solution. So, I'm looking for some feedback on my suggested approach as described in the paragraph before the preceeding paragraph. Is my reasoning correct? Am I overlooking (potential) problems? What about my assumption that application's performance will not be impeded?

  Read the article

• XPathNavigator in Silverlight

  - by vladimir

  I have a code library that makes heavy use of XPathNavigator to parse some specific xml document. The xml document is cross-referenced, meaning that an element can reference another which has not yet been encountered during parsing: <ElementA ...> <DependentElementX id="1234"> </ElementA> <ElementX id="1234" .../> The document doesn't really look like this, but the point is that 1) there is an xml schema that enforces the overall document structure, 2) elements inside the document can reference each other using some IDs, and 3) there is quite a few such cross references between different elements in the document. The document is parsed in two phases. In the first pass I walk through the document XPathDocument doc = ...; XPathNavigator nav = doc.CreateNavigator(); nav.MoveToRoot(); nav.MoveToFirstChild()... and occasionally 'bookmark' the current position (element) in the document using XPathNavigator.Clone() method. This gives me a lightweight instance of an XPathNavigator which I can store somewhere and use later to jump back to a particular place (element) in my document. Once I have enough information collected in the first pass (for example, I have made sure there is indeed an ElementX with an id='1234'), I jump back to saved bookmarks (using those saved XPathNavigators) and complete the parsing. Well, now I'm about to use this library in Silverlight 3.0 and to my horror the XPathNavigator is not in the System.Xml assembly. Questions: 1) Am I missing something obvious (i.e. XPathNavigator does exist in some shape or form, for example in a toolkit or a freeware library)? 2) If I do have to make modifications in the code, what would be the best way to go? Ideally, I would like to make minimal changes, not to rewrite 80% of the code just to be able to use something like XLinq. To resume, in case I have to give up XPathNavigator, all I need is a way to bookmark places in my document and to get back to them so that I can continue to iterate from where I left off. Thanks in advance for any help/ideas.

  Read the article

• Is it too early to start designing for Task Parallel Library?

  - by Joe Erickson

  I have been following the development of the .NET Task Parallel Library (TPL) with great interest since Microsoft first announced it. There is no doubt in my mind that we will eventually take advantage of TPL. What I am questioning is whether it makes sense to start taking advantage of TPL when Visual Studio 2010 and .NET 4.0 are released, or whether it makes sense to wait a while longer. Why Start Now? The .NET 4.0 Task Parallel Library appears to be well designed and some relatively simple tests demonstrate that it works well on today's multi-core CPUs. I have been very interested in the potential advantages of using multiple lightweight threads to speed up our software since buying my first quad processor Dell Poweredge 6400 about seven years ago. Experiments at that time indicated that it was not worth the effort, which I attributed largely to the overhead of moving data between each CPU's cache (there was no shared cache back then) and RAM. Competitive advantage - some of our customers can never get enough performance and there is no doubt that we can build a faster product using TPL today. It sounds fun. Yes, I realize that some developers would rather poke themselves in the eye with a sharp stick, but we really enjoy maximizing performance. Why Wait? Are today's Intel Nehalem CPUs representative of where we are going as multi-core support matures? You can purchase a Nehalem CPU with 4 cores which share a single level 3 cache today, and most likely a 6 core CPU sharing a single level 3 cache by the time Visual Studio 2010 / .NET 4.0 are released. Obviously, the number of cores will go up over time, but what about the architecture? As the number of cores goes up, will they still share a cache? One issue with Nehalem is the fact that, even though there is a very fast interconnect between the cores, they have non-uniform memory access (NUMA) which can lead to lower performance and less predictable results. Will future multi-core architectures be able to do away with NUMA? Similarly, will the .NET Task Parallel Library change as it matures, requiring modifications to code to fully take advantage of it? Limitations Our core engine is 100% C# and has to run without full trust, so we are limited to using .NET APIs.

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >